CATHODE RAY TOMES

Igmo

IGMO (Epos Corporation, 1984) · Manual · 14 pages · 9 sections · original scan

Page 1

GMMG

Fully Licensed

INSTRUCTION MANUAL

Manufacturer Magic Conversion Co. P.O. Box 3263 820 Elmwood Avenue Providence, Ri 02907 (401) 461-9389

Distributor

Page 2

IGMO DIAGNOSTICS

, In order to aid the operator in quickly locating and correcting problems in the IGMO game board, several comprehensive, diagnostic routines were provided in IGMO software. A diagnostic button provided on the harness and designed to be located inside the arcade cabinet will allow the operator to enter the diagnostic program. After depressing the diagnostic button, the diagnostic routines may be selected and executed by using the joystick and the fire button. A menu will be displayed upon entering the diagnostics and will display the following diagnostic routines:

CURRENT SETTINGS COLOR TABLE SCRATCHPAD RAM VIDEO RAM ROM CONVERGENCE BUTTONS: EXIT

The above eight selections are described as follows:

  • CURRENT SETTINGS- Upon entering this routine, the status of the dip switches will be displayed along with a description of the function of each switch. Use this routine when checking the setting or use it as an aid in readjusting the settings. Among the game functions which may be adjusted are the number of IGMO's per credit, the number of credits per.coin, the difficulty level and the extra IGMO level. >
  • COLOR TABLE- The color table function will display the different colors of both palettes of the color PROM. If. bad colors are found, the color FROM, U66, should be checked and if necessary, replaced.
  • SCRATCHPAD RAM- This routine allows U12 to be checked for faulty static ram locations. Should an error be found, try reseating U12. If an error still persists, replace ul2.
  • VIDEO RAM- This routine performs several checks of the dynamic ram comprising the display ram. At the end of the routine, the status of each dynamic ram is displayed. Faulty dynamic rams should be replaced with 150ns 4116's. If errors persist, the ram controllers, US7 and US8, should be suspected.
Page 3
NOTE: ROM— This selection performs a ROM checksum which should point out data and program memory errors should they exist. Faulty EPROM’s will be identified after the execution of this routine. Try reseating the EPROM’s before assuming an EFROM failure. If an EPROM is replaced, replace it with one of the same code number as indicated on the EPROM label.

CONVERGENCE- This routine displays a convergence pattern which allows the operator to align the color guns of the video game monitor.

BUTTONS- This routine allows the operator to locate faulty buttons. A tone will sound when a button is depressed or

if a switch is shorted to ground. If no tone sounds when

a button is depressed, faulty or dirty contacts should be suspected.

EXIT— This routine takes the operator out of diagnostics and into the regular game mode.

Every time the game is powered-up, all necessary diagnostic routines are run to ensure the normal operation of the game. Should an error be located by the "self test" diagnostics, the error will be displayed on the screen.

Page 4

CONVERTABILITY FEATURE

IGMO has an exclusive built-in convertability feature which bles the operator to quickly change IGMO into the next available conversion game. This convertability feature relies on the addition of an "ID MODULE" which will allow the game logic board ta execute the mew game. Wires are provided on the IGMO en

harness for the future connection to the “ID MODULE". (Do not detach these extra wires) IGMO does not require an "ID MODULE” therefore one was not provided. However, when the next conversion is purchased, a new set of EFROM’s and an "ID MODULE" will be sent along with the installation instructions for the new game. Because of the "ID MODULE" feature, new top earning qames may be installed simply by replacing the EPROM’s and the "ID MODULE" at a substantial savings to the operator.

FRONT PANEL LAYOUT

We suggest you follow this layout as it is working very well

lon o 20, ~~ ». oa % & cS ‘y oie

Instructions

PLAYERS MUST UNDERSTAND GAME

Blue Button to move Blue Button to move

8Way Joystick

it ls Important to put buttons on either side of Joystick to appeal to left or right handed players

Page 5

Pin No.

AMANTHAN<xECCHMMVZErCAUTMMoSoOMD Edgeconnector Assignments

SOLDER SIDE

GND-Black GND-Black Plus S VDC-Red Flus 5 VDC-Red TO COIN COUNTER-Yellow LIGHT II-Yellow ID MODULE-Green ID MODULE-Gray ID MODULE-Purple ID MODULE-White/Yellow JOYSTICK UP-White/Red JOYSTICK DOWN-Brown

MOVE BUTTON — GREEN - 1 PLAYER GAME BUTTON-White

BLUE GUN-Blue Plus S VDC-Red Plus 5 VDC-Red GND~-Black GND-Bl ack Minus S VDC-Brown Minus 5S VDC-Brown Plus 12 VDC-Orange Plus 12 VDC-Orange RED GUN-Red EXTERNAL RESET-Furple Pin No.

WONOUSWNH PARTS SIDE

GND-Black GND-Black Plus 5 VDC-Red Plus 5S VDC-Red

LIGHT I-Orange ID MODULE-White/Yellow ID MODULE-Purple ID MODULE-Gray ID MODULE-White/red JOYSTICK RIGHT-Gray JOYSTICK LEFT-Blue FIRE BUTTON-Yellow

COIN IN-Gray 2 PLAYER GAME BUTTON-Brown DIAGNOSTICS BUTTON-White/Red GREEN GUN-Green Plus 5 VDC-Red Plus 5 VDC-Red GND-Black GND-Bl ack Minus 5 VDC-Brown Minus 5 VDC-Brown Plus 12 VDG-Orange Plus 12 VDC-Orange SPEAKER-Yel low . COMPOSITE SYNC-White

Page 6

Sl. 2 ew ew we we

S2, SS... « « »

S4, SB seeveeeee

86, 87, SB... ON -- 1 OFF - 2

ON, ON OFF, ON ON, OFF OFF OFF

ON, ON OFF, ON ON, OFF

OFF , OFF

ON, ON, OFF, ON, ON, OFF, OFF ,OFF, ON, ON, OFF, ON, ON, OFF, OFF,OFF, Dip Switch Assignments

credit per coin credits per coin

3 IGM 4 IGM S IGM 6 IGM

Extra Extra Extra Extra

ON - ON - ON - ON - OFF ~ OFF - OFF - OFF - (O's per (O's per 0's per O's per

IGMO at IGMO at IGMO at IGMO at

Difficul Difficul Difficul Difficul Difficul Difficul Difficul Difficul credit credit credit credit

20000 points 40000 points 60000 points 80000 points

ty level ty level ty level ty level ty level ty level ty level ty level ONO MUN

Page 7
IMPORTANT INFORMATION CONCERNING THIS HARNESS

Wire groups labelled as GROUP S and GROUP 6 are provided for FUTURE GAME CONVERSIONS and are NOT required for operation of the IGMO game board. HOWEVER, it is strongly suggested that both groups (5 and 6) be unaltered and fastened securely to the side of the game cabinet for future use. Further information concerning game conversions can be obtained by corresponding with your distributor.

Page 8

Carem

IRESSSSSON: seeaaGa ghee os a frhices aes, “4 8 aa Bas p cased 2a ot a so = Fl mop Tes = oe ioe

TRESTSER fee keaeaere re UL ¥

Page 9

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 10

Z L 505 |

Page 11

RR a nt ” oy ma me

a Lgtig c

Page 12

Sci SYSTEMS ne. ] = x Suan oate BG] untsvitce, ALABAMA | 17981 ws 2302 {PL 5050507 12 PARTS LIST NOTES |. DROP SHIP ITEMS 4,5,21¢ 29 CUSTOMER INSTALLED.

PRINTED WIRING ASSY

EPOS TRISTAR 8000

00) wo. | avy | ary | ary ‘8€1 CONTROL HO. DESCRIFTION NOMENCLATURE rece WO, PARTAOANTIFICATION WO. Bocrersc wo, tao | Aéap | REQD si =}

Tren eet tt I

Tey inl =|

er SI

mini—zia| al

=

T

t fe a Ss Halter i $61 Fons woe 07h EW TRAY 4 ° PL5050507

Page 13

eee ee Li i a ral : CRS ot Sp OTIS oe Pot Se em WW SOF SSN at Coop Se eis S55 OS560.67)

93487200

  • = —

on 435HS NOILVANILNOD Asi SLUVd

TUASLNNH ASAS IDS iss]

WVB8V IV 4 “ON! ‘SWwa.

Qmél 200505 ™4] gerzam, | Eeet |" q

Page 14

BOARD SURFACE. Tit, Be oooe zee Pda . ees Re AOCOEE ET i sauce perry hy Atte ge

x20 2 Gi wo GR) au Ct) av (aa) mor 001 SHOWN = AN (aa) i ry SCi SYSTEMS, INC. no GE = {a BE lee SG. Sveree ne Aw Go) -_ a

“ DETAIL A A

aay T 7 T ry T s