CATHODE RAY TOMES

Alien vs Preditor

Alien vs. Predator (Europe 940520) (Capcom, 1994) · Manual · 17 pages · 21 sections · original scan

Page 1

ALIEN?

PREDATOR

ALIEN AND PREDATOR TM & © 1994 Twentieth Century Fox Film Corporation All Rights Reserved. © CAPCOM 1994

MANUAL

WARNING

This game is for use in the United States of America and Canada. Sales, export or operation outside of these countries may be construed as copyright and trademark infringements and is strictly prohibited. Violators are subject to severe penalties and will be prosecuted to the full extent of the law.

® 19-0016

Page 2

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 3

ARNIN

THIS GAME MUST BE GROUNDED. FAILURE TO DO SO MAY RESULT IN DESTRUCTION TO ELECTRONIC COMPONENTS.

WARNING: This equipment generates, uses and can radiate radio frequency energy and if not used in accordance with the instruction manual, may cause interference to radio communication. It has been tested and found to comply with the limits for a CLASS A computing device pursuant to SUBPART J and PART 15 of FCC RULES, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his won expense will be required to take whatever measures may be required to correct the interference.

\

"WINNERS DON'T USE DRUGS"

Louis Freeh, Director, FBI

+ IN COOPERATION WITH THE AAMA AND FBI ANTI-DRUG CAMPAIGN +

CAPCOM INVITES YOU TO USE

OUR SERVICE NUMBER FOR SERVICE INFORMATION CONCERNING THIS GAME, OR ANY OTHER CAPCOM GAME YOU NOW HAVE ON LOCATION. PLEASE HAVE GAME SERIAL NUMBERS AND CABINET NUMBERS READY.

CALL US FOR PROMPT, COURTEOUS ANSWERS TO YOUR PROBLEMS

ANSWERS TO YOUR PROBLEMS.

DIRECT NUMBER _ 1-800-833-0190

Page 4

CAUTION

Please keep the following instructions to keep the PC board in good condition

© Do not block the ventilation slots.

e Do not drop or bump the board.

e Do not spill any liquids on the case.

© Do not disassemble the case.

ATTENTION

battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste system. Check with your local solid waste official for details in your area for recycling options or proper disposal.

& The product that you have purchased contains a rechargeable battery. The

DISASSEMBLING THE CASE OR REMOVING THE STICKER MAY CAUSE THE TERMINATION OF YOUR REPAIR WARRANTY.

Page 5

PARTS LIST

There are two different kits available for Alien vs. Predator. The first kit below is the full kit which includes PCB, all necessary graphics, buttons, joysticks and a volume/test bracket. This kit is used for a cabinet that will be upgraded with the CPS II board for the first time. The second kit is called the "B" Kit. This kit is for any cabinet that already uses the CPS II board (Super Street Fighter II). This kit includes the "B" board and all necessary graphics. Just remove the top cartridge off the motherboard and replace with the new cartridge.

AP1000 Alien vs. Predator Kit

Part No. Description Qty.

03-0050Momentary Switch Assembly1
06-0066Side Graphics2
06-0074Blue Marble Overlay1
06-0077Alien vs. Predator Instruction Label1
06-0076Alien vs. Predator Marque1
16-0130Player 1 Start Button1
16-0131Player 2 Start Button1
16-0132Player 3 Start Button1
16-0133Red Button3
16-0134Blue Button3
16-0136Green Button3
19-0016Alien vs. Predator Manual1
AP1400Alien vs. Predator PCB1
GE1200Monitor Card1
GE2030Joystick3.

AP1000B Alien vs. Predator B Kit

Part No. Description Qty.

06-0074Blue Marble Overlay1
06-0076Alien vs. Predator Marque1
06-0077Alien vs. Predator Instruction Label1
19-0016Alien vs. Predator Manual1
AP1400BAlien vs. Predator "B" PCB1
Page 6

CONTROL LOCATIONS

  • SAMPLE CONTROL PANEL LAYOUT

SJ!

PUSH 2:

LEFT RIGHT Attack

PUSH 1: PUSH 3: Shoot Jump (Dash)

  • VOLUME AND TEST CONTROL SWITCHES ON BOARD

The volume of this unit can be adjusted by pressing the volume-up switch and the volume-down switch. The setting you have selected will be stored even if the power is turned off. In the event that the volume setting does not work properly, press down on either the volume-up or the volume down switch for at least five seconds, then set the volume again.

TEST SWITCH ‘VOLUME-UP SWITCH -VOLUME-DOWN SWITCH

  • VOLUME AND TEST CONTROL BRACKET To be mounted on top of the coin box.

‘O) SERVICE =O) < fe} B<8 = z

Page 7

CONNECTORS

. JAMMA: . OPTION: . AUDIO OUT: . REGISTER: JAMMA 56-pin connector Player 3 Interface and Volume Control Used only for CAPCOM QSOUND cabinet Optional I/O connector for register

JAMMA CONNECTOR

SOLDER SIDE COMPONENT SIDE

GNDA1GND
GNDB2GND
+5VCc3+5V
+5VD4+5V
NC.EB5NC.
+12VF6+12V

H 7

N.C.J8COUNTER 1
LOCK OUT 2K9LOCK OUT 1

SPEAKER (-) L | 10 | SPEAKER (+)

N.C,MilNC.
VIDEO GREENN12VIDEO RED

VIDEO SYNC P | 13 | VIDEO BLUE FREECREDIT | R | 14 | VIDEOGND

N.C.Ss15DIAGNOSIS
2P COINT161P COIN
2P STARTU171P START

2PUP | V | 18 | 1PUP

2P DOWNWwW191P DOWN
2P LEFTx201P LEFT

2PRIGHT | Y | 21 1P RIGHT 2P PUSH 1 Z | 22 | 1PPUSH1

2P PUSH 2a | 231P PUSH2

2P PUSH 3 b | 24 | 1PPUSH3

N.C.c25NC.

N.C. d | 26 | NC. GND e | 27 | GND GND f | 28 | GND

CONNECTOR LOCATIONS

REGISTER OPTION CONNECTOR

COIN BLOCKER +12V 5 3P LOCK OUT 7

3P PUSH 2 23 ———_O—O— 3P PUSH 3 25 | ——o— 0_ GND 33 — VOLUME UP 29 |——_o—_0—_ VOLUME DOWN 30 ——_0o— O—_ VOLUME COMMON 31 aD GND 34

33 | GOO0o00o0o0o0o0000000 |} 1 34 | DOOOooeoooooooK oA | 2

Harness Side

AUDIO OUT (FOR QSOUND) (RIGHT: RED, LEFT: WHITE)

OPTION CONNECTOR

Page 8

TEST MENU

The test menu allows you to test the functions and controls of the game. These items include input devices such as joysticks, buttons and coin mechs, output devices such as monitor, speakers and meters. Through the Test Menu you can also access the Configuration Menu, where you can change the settings of the game.

  • ACCESSING THE TEST MENU

. For a CAPCOM cabinet, or a cabinet equipped with a test switch: Turn on the main switch, then push the test switch. The screen shown below will appear. ° For a cabinet without a test switch: Push the test switch on the side of the blue plastic electronic casing. Refer to the Controls Section of the manual.

INPUT

OUTPUT

Q SOUND

COLOR

DOT CROSS HATCH

SYSTEM CONFIGURATION

OBJECT

SCROLL 1

SCROLL 2

SCROLL 3

MEMORY CHECK

> 1.

2.

3.

4.

5.

6.

7.

8.

  • HOWTO SELECT AN ITEM

. Use the Player 1 Joystick to highlight the desired item and press the Player 1 A (Shoot) button. ° To return to the test menu, push the Player 1 Start and Player 2 Start Buttons simultaneously. The test menu automatically appears: . After you exit the "6. CONFIGURATION MENU". . After the memory is tested on the menu of "11. MEMORY CHECK".

  • CLOSING THE TEST MENU

To close the Test Menu, highlight "11. EXIT" and push the Player 1 Shoot Button.

Page 9
  • TEST MENU ITEM DESCRIPTIONS

INPUT Used to test all the input switches. "1" appears when the switches are depressed. Check connections and switches in case "0" appears when swithces are OUTPUT depressed.

Select a code of SOUND or VOICE with the Player 1 Joystick. QSOUND Push the Player 1 A (Shoot) button to hear the sound of the selected code, then adjust the volume.

Shows color bars of red, green, blue and white. COLOR Adjust RGB and brightness to obtain the optimum color balance and solid black background.

DOT CROSS HATCH Used to test the screen size, focus and distortion.

Used to change the game play settings. Refer to the CONFIGURATION CONFIGURATION MENU setion.

7, 8,9, 10 Used to check all the characters of the game.

Used to test memory.

MEMORY TEST "OK" appears when each block of memory passes test

"ERROR" appears in case of malfunction. If "ERROR" appear, repeat the memory test. Contact your distributor if "ERROR" still appears.

EXIT Select this item and push the Player 1 A (Shoot) button to return to game play mode.

Page 10

CONFIGURATION MENU

  • TO OPEN THE MENU

° From the Test Menu, highlight "6. CONFIGURATION MENU" and push the Player 1 A (Shoot) button. The screen below will be displayed. SYSTEM allows you to change system settings such as credit value and demo sound. GAME allows you to change game settings such as difficulty and number of players.

CONFIGURATION MENU

  • SYSTEM
  • GAME
  • CHANGING THE CONFIGURATION SETTINGS

° Move the Player 1 Joystick UP or DOWN to highlight the desired option. Once the option is highlighted, move the Joystick LEFT or RIGHT to change the setting. Refer to menus on the next 2 pages for option settings.

  • SAVING SETTINGS AND CLOSING THE MENU

° Once the configuration settings are changed from either the SYSTEM or GAME MENUS, highlight "EXIT" and push the Player 1 A (Shoot) button. ° To save the settings press the Player 1 and Player 2 Start buttons simultaneously at the CONFIGURATION MENU. A message "NOW SAVING NEW CONFIGURATION" appears while new settings are being saved. It takes one or two seconds to save the new settings. Do not turn off the power switch while saving is in process.

Page 11
  • SYSTEM CONFIGURATION MENU

SYSTEM CONFIGURATION MENU

COIN 1COIN 1 CREDIT

CONTINUE ON

MONITOR FLIP OFF

DEMO SOUND OFF

SOUND MODE STEREO (Q SOUND) PLAYER MODE 3 PLAYERS 3 SHOOTERS

FACTORY SETTING

EXIT

1 COIN1 COIN1 COIN1 COIN1 COIN

1 CREDIT | 2CREDITS | 3CREDITS | 4CREDITS | 6 CREDITS COIN

2 COINS3 COINS4 COINS2 COINS START
1 CREDIT1 CREDIT1 CREDIT |! COIN CONTINUE BREE ELAY

CONTINUE ON OFF

MONITOR FLIP ON OFF

DEMO SOUND ON OFF

SOUND STEREO (Q SOUND) MONAURAL

3 PLAYERS 3 PLAYERS 2 PLAYERS PLAYER s 3 SHOOTERS 1 SHOOTER 1 SHOOTER

  • Factory settings are in bold face. . After you change the setting, make sure to select "EXIT" and push the Player 1 Start button. + Choose STEREO (QSOUND) if your cabinet is equipped with the Qsound Speaker System, otherwise select MONAURAL for proper sound effect.
Page 12

5. GAME CONFIGURATION MENU

GAME CONFIGURATION MENU

DIFFICULTY

EXTEND

NUMBER OF PLAYERS

FACTORY SETTING

EXIT EASY 4 HARD

ONLY 100000

START =1 CONTINUE = 2

LEVEL |LEVEL 2LEVEL 3LEVEL 4

EASIEST VERY EASY EASY MEDIUM

GAME DIFFICULTY

LEVEL 5LEVEL 6LEVEL 7LEVEL 8

MEDIUM HARD HARD VERY HARD HARDEST

NO1000004000001000000

EXTENSION ONLY ONLY ONLY

EXTEND FIRST FIRST FIRST FIRST

1000004000008000001200000
EVERYEVERYEVERYEVERY
4000005000006000001000000
START = 1START =2START =3START =5

CONTINUE =1 | CONTINUE =2 | CONTINUE=3 | CONTINUE =5 PLAYERS

START =1START =2START =3START =5

CONTINUE = 2 | CONTINUE =3 | CONTINUE =4 | CONTINUE =6

Page 13
  • CONFIGURATION ITEM DESCRIPTIONS

COIN Sets the charge per play

Allows a player to continue playing after he loses. Extra money CONTI will need to be added to continue. ON: Continuous play is possible OFF: Continuous play is not possible

MONITOR FLIP Flips the screen. If the screen appears upside down, change the setting. ON: Upside down OFF: Right side up

DEMO SOUND Turns attract sound on or off.

STEREO or MONAURAL. s0 STEREO: with QSOUND MONAURAL: without QSOUND QSOUND is available with CAPCOM QSOUND cabinets only. For other cabinet, please set to MONAURAL

PLAYER MODE Sets the number of players and coin shooters.

GAME DIFFICULTY The higher the number, the more difficult the game play.

Extra player setting. EXTEND ¢ ONLY MODE: Extra player given only once during game. e EVERY MODE: Extra player given whenever stated number of points are earned.

NUMBER OF PLAYERS Number of lives.

FAI RY SE G To return to the factory default settings, select this item and push the PLAYER 1 START button.

EXIT To save the setting changes and return to the TEST MENU, highlight this

item and push the PLAYER 1 START button.

Page 14

MOUNTING THE PC BOARD

  • INSTALLING THE MOUNTING BRACES

4 mounting braces are included in the package

  • MOUNTING THE PCB

These screws are not included in the package. q

Page 15

HOW TO REMOVE THE TOP "B" CARTRIDGE

In the future, there will be the capability to remove the top "B" cartridge so that a game can be converted to a new game or upgraded to a different version. It is very important only to seperate the top cartridge from the main board only. Dissasembling either case will void your warranty. Follow the instructions below to seperate the two assemblies.

° Remove the 2 case clamps. . Carefully pull the the "B" cartridge off the bottom cartridge.

STICKER DESCRIPTIONS

Sealing sticker

Cartridge serial number sticker AAMA Serial number sticker ‘Waring information sticker Reverse Side of Cartridge

Warming information sticker Cartridge

Serial Number (bottom of case)

‘ase color sticker

Main Board

Disassembling the case or removing the sealing stickers will void your warranty!

Page 16

535 Oakmead Parkway Sunnyvale, CA 94086

Page 17

ADENDUM

There is an error on page 5 of the Alien vs. Predator manual. The connection for the Player 3 Start button on the option connector was omitted. The Player 3 Start button is pin 11 of the option connector. The proper option connector diagram is shown below.

OPTION CONNECTOR

. f COIN BLOCKER +12V 5 3P LOCK OUT 7

3P COIN5—-O—_0—
3P STARTil—O—_0—_

3P UP 13 —-O0—_0—_

3P DOWN15| ——o—_o—
3P LEFT17—O—_O0—_
3P RIGHT19.| ———O—-_ 0 —_
3P PUSH 121.| o_o —
3P PUSH 223.«| o_o —
3P PUSH 325|Oo0

GND 33. | ——> VOLUME UP 29 | o_O VOLUME DOWN 30 | ———_o——o0— VOLUME COMMON 31. | ———________ GND 34

iol io 33 ooooo0o0o0oo0000 | 1 34 | DOOOoOoOoOoOoOooOooOooo |} 2

Harness Side