Dig Dug TM-203 4th Printing
Dig Dug (rev 2) (Namco, 1982) · Technical Manual · 68 pages · 52 sections · original scan
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
GAME SERIAL NUMBER LOCATION
Your game's serial number is stamped on a label on the outside back of the P r )
Operation, Maintenance and Service Manual
Complete with Illustrated Parts Lists
Engineered and Designed by NAMCO, LTD. Manufactured under license by ATARI, INC.
Dig Dug™
© 1982 by Atari, Inc. All rights reserved. No part of this publication may be reproduced by any mechanicai, photographic, or electronic process, or in the form of a phonographic recording, nor may it be stored in a retrieval system, transmitted, or otherwise copied for public or private use, without permission from ihe publisher.
The Dig Dug™ game play, all graphic designs, this technical manual, its accompanying schematic diagrams, and the display manual are protected by the new Copyright Act of 1976
This Act provides for increased penalties for violating federal copyright laws. Courts can impound infringing articles while legal action is pending. If infringers are convicted, courts can order destruction of the infringing articles.
In addition, the Act provides for payment of statutory damages of up to $50,000 in certain cases. Infringers may also have to pay costs and attorneys’ fees, fines up to $25,000, and face an imprisonment of up to one year.
Atari wil! aggressively enforce its copyrights against any infringers. We will use all legal means to immediately halt any manufacture, distribution or operation of a copy of video games made by us. Anyone who purchases such copies risks forfeiting such a game.
Published by: ATARI INC, 790 Sycamore Drive PO. Box 906 Milpitas, California 95035
Lithographed in the U.S.A. 6L
Dig Dug™
INTERFERE
to licensed communications services is not permitted by the FCC (Federal Communications Commission) If you suspect interference trom an ATARI game at your location, check the following: @ All grounds (green wires) in the game are properly connected as shown in the game wiring diagram, and @ The game’s power Cord is properly plugged into a grounded 3-wire outlet. If you are unable to solve the interference problem, please contact:
ATARI Customer Service (800) 526-3849 or (800) 538-1611
Notice Regarding Non-ATARI Parts
Use of non-ATARI parts or modifications of your ATARI game circuitry may adversely affect the safety of your game, and may cause injury to you and your players.
The warranty printed on the inside back cover of this manual may be voided, if you do any of the following:
@ you substitute non-ATARI parts in your coin-operated game, or
@ you modify or alter any circuits in your ATARI game by using kits or parts not supplied by Atari.
Not only may the use of any non-ATARI parts void your warranty, but any such alteration may also adversely affect the safety of your game and may cause injury to you and your players.
Dig Dug™
Table of Contents
Set-Up Procedures A. New Features 1-3 B. Opening the Cocktail Cabinet . 1-4 C. Game Inspection ......... 1-5 D. Game Installation......... 1-5
- Installation Requirements . - 15
- Voltage Selection ..... . 15 E. Cocktail Table Legs 146 F. Switch Locations . 1-7
- On/Off Switch .. 1-7
- Utility Panel Switches 1-7
- Option Switches .... 1-8 G. Option Switch Settings . 1-9 H. Self-Test Procedure . . 1-10 |. Game Play ...... 1-12
- Attract Mode ... 1-12
- Ready-to-Play Mode . 1-12
- PlayMode ....... 1-12
- High Score Mode . 1-13
- Hints forGame Play 2.6... 00 cece ee ete eee 1413
Troubleshooting A. Introduction ..............- 21 B. Comments on Troubleshooting » 22 C. Self-Test Procedure ...... 0.0.0.0 ee cece cect eee eee 2-2
Maintenance, Repair and Parts Cabinet-Mounted Assemblies TheControl Panel... 0.6.6 e cee eee eee tenet eens Fluorescent Tube and Speaker Video Display.............- Coin Doors Printed-Circuit Boards Power Supply Assembly ormoop>
Dig Dug™
List of Illustrations
Figure 1-1 Game Overview, Upright Cabinet .........0....0 0.0 c cece eee eee 1-2 Game Overview, Cabaret Cabinet . . . 1-3 Game Overview, Cocktail Cabinet. . . 1-4 Figure 1-2 Adjusting the Table Legs.................. 16 Figure 1-3 Game Switch Locations, Upright and Cabaret Cabinets - Game Switch Locations, Cocktail Cabinet... . Figure 1-4 Self-Test Procedure ........ 2.0... cece cece ete een eee
Figure 2-1 Self-Test Screen 1—Test Passes Figure 2-2 Self-Test Screen 1—Test Fails. . an Figure 2-3 Self-Test Screen 2 2.0.0.0... cece cee cece cece eee nee
Maintenance, Repair and Parts: Figure 3-1 Cabinet-Mounted Assemblies, Upright Cabinet Cabinet-Mounted Assemblies, Cabaret Cabinet Cabinet-Mounted Assemblies, Cocktail Cabinet Figure 3-2. TheControl Panel .........-......-0000e Figure 3-3 Control Panel Assembly . Figure 3-4 Joystick Assembly... ........ 0.00 ccc eee ecceeeeeeeen eee
Figure 3-5 Fluorescent Tube and Speaker, Upright Cabinet ................. 3-16 Figure 3-6 Video Display, Upright and Cabaret Cabinets .. Video Display, Cocktail Cabinet Figure 3-7 Vertical-Mounted Coin Door, Upright and Cabaret Cabinets ........ 3-20 Figure 3-8 Double Coin Acceptor/Mount Assembly, Cocktail Cabinet 3-23 Figure 3-9 Printed-Circuit Board Removal Figure 3-10 Dig Dug™ Game PCB Assembly . . Figure 3-11 Regulator/Audio I! PCB Assembly Figure 3-12 Power Supply Assembly ............0..0 0:0 cece cece eee ene ees
Table 1-1 Game Price and Bonus Options ............... Table 1-2 Game Difficulty, Price and Special Options Table 1-3 Dig Dug Scoring..... 2.0... ccc tte eee
Dig Dug™
vi If reading through this manual does not lead to solving a certain maintenance problem, cali TELEHELP® at the Atari Customer Service office in your geographical area, as shown below.
WEST and CENTRAL U.S.A. Parts and Service
Atari, Inc. California Customer Service Office 1165 N. Fair Oaks Avenue P. O. Box 427, Sunnyvale, CA 94086 Telex 17-1103 (Monday-Friday, 7:30-4:00 pm Pacific Time) From California, Alaska, or Hawai! @ (408) 745-2900 Service from anywhere in the area shown in white s toll-free (800) 538-1611
EAST U.S.A. Service only
Atari, Inc. New Jersey Customer Service Office 12A World's Fair Drive, Somerset, NJ 08873 Telex 37-9347 (Monday-Friday, 7:30-4:00 pm Eastern time) From New Jersey ®& (201) 469-5993 ee From anywhere else in this area ‘& toll-free (800) 526-3849
EUROPE Parts and Service
Atari Ireland Limited European Customer Service Office Tipperary Town, Ireland Telex 28165 TIPPERARY TOWN, (Monday-Friday, 9:00-6:00 pm GMT) IRELAND BD 06252155
Set-Up Procedures
How to Use This Manual
This manual, written for game operators and service technicians, describes the Dig Dug™ game.
The manual contains information about a// Dig Dug cabinets. Whenever information is unique to
the Upright cabinet, this symboi appears: i
Whenever information is unique to the Cabaret™ cabinet, this symbol appears:
Whenever information is unique to the Cocktail
Cabinet, this symbol appears: =i
Chapter One includes new features, game set-up, option switch settings, self-test procedures and game play.
Chapter Two details troubleshooting procedures.
Chapter Three contains maintenance, repair and parts information. In addition, schematic diagrams of the game cir- Cuitry are included with this manual. Figures 1-1 and 3-1 illustrate the game cabinet. Italicized lettering on these figures refers you to other places in the manual for information about specific cabinet parts.
Chapter
Set-Up Procedures Dig Dug™
FLUORESCENT TUBE ‘AND SPEAKER See Figure 3-5
COLOR VIDEO DISPLAY See Figure 3-6
: * JoysTICK
See Figure 3-4 ACCESS PANEL
CONTROL PANEL See Figure 3-2 & 3-3
GAME PCB See Figuies 3-9 & 3-10
COIN DOOR See Figure 3-7
CASTER
POWER SUPPLY See Figure 3-12
WARNING (©
SHOCK HAZARD Connect this game only to a grounded 3-wire outlet. If you have only a 2-wire outlet, we recommend you hire a licensed electrician to install a grounded outlet. Players may receive an electric shock if this game is not properly grounded! UTILITY PANEL See Figure 1:3
REGULATOR/ DIO 11 PK POWER ON/OFF SWITCH seo hemee te 3 "1 See Figure 1-3
Figure 1-1 Game Overview
Upright Cabinet
1-2
Dig Dug™
A. New Features
The Dig Dug™ game has two new features. Even if you're familiar with ATARI® games, you should note these important differences: @ Joystick Control. This new four-position control is made of steel and molded plastic. It has few parts, which makes servicing easier. The leaf switches snap in and out for easy replacement. The rubber bellows is designed for a quick return to center. Set-Up Procedures
@ Game Sounds. There are 21 different game sounds. In addition, a special option switch setting lets you hear sounds used during game play, but turns off attraction-mode sounds. New features, as well as all other major parts in the game, are illustrated in Figure 1-1. Throughout this manual, wherever one of these new features is mentioned, you will see this symbol:
COLOR VIDEO DISPLAY See Figure 3-6
JOYSTICK See Figure 3-4
CONTROL PANEL See Figures 3-2 & 3-3
COIN DOOR See Figure 3-7
UTILITY PANEL See Figure 1-3
POWER ON/OFF SWITCH
Figure 1-1 o ACCESS PANEL
REGULATOR! AUDIO Hi PCB See Figures 3-9 & 3-11
GAME PCB See Figures 3-9 & 3-10
POWER SUPPLY See Figure 3-12
Game Overview, continued
Cabaret™ Cabinet
Set-Up Procedures Dig Dug™
B. Opening the Cocktail Cabinet
- Opening the Table Top @ To open the game cabinet, unlock and open the two key locks at one end of the game cabinet, located immediately below the table top (see Figure 1-1). @ Carefully lift the table top until the support arm locks into place. Do not jam the table top at the end of its upward swing.
- Access Panel @ To open the access panel, lift out the steel security bar that secures the panel to the cabinet wall. @ The access panel near the bottom of the cabinet will then come out.
- Closing the Table Top @ To close the cabinet, stand opposite the hinged end of the cabinet and grasp the table top with your right hand. @ With your left hand, press the button at the middle of the support arm and push the button out toward the left. @ Gently lower the table top to the closed position. @ Lock both key locks.
TABLE TOP
JOYSTICK | See Figure 3-4
CONTROL PANEL See Figures 3-2 & 3-3
ACCESS PANEL
POWER SUPPLY See Figure 3-12
ADJUSTABLE LEG See Figure 1-2 LOCK
Figure 1-1 GAME PCB R See Figures 3-9 & 3-10 COLOR VIDEO DISPLAY See Figure 3-6
UTILITY PANEL See Figure 1-3
REGULATORI AUDIO I PCB
COIN ACCEPTORS See Figure 38
COIN COUNTER
POWER ON/OFF SWITCH See Figure +3
Game Overview, continued Cocktail Cabinet
Dig Dug™
C. Game Inspection
Please inspect your game carefully to insure that it was delivered to you in good condition.
- Examine the exterior of the game cabinet for dents, chips, or broken parts.
- Remove the screws that were used as extra security to seal the rear access panel (Upright and Cabaret cabinets). Unlock and open this panel or the Cocktail table top, and the coin door; inspect the interior of the game as follows: @ Check that all plug-in connectors (on the game harness) are firmly seated. Replug any connectors found unplugged. Don’t force connectors together. The connectors are keyed so they only go on in the proper orientation. A reversed edge connector will damage a PCB and will void your warranty. @ Check that all plug-in integrated circuits on the PCBs are firmly seated in their sockets. @ Remove the tie-wrap that holds the coiled power cord on the inside cabinet wall (Upright and Cabaret cabinets). Check the power cord for any cuts or dents in the insulation. Place the square black plastic strain-relief plate in the wood slot at the bottom of the rear panel opening.
@ Note the game's serial number. On Upright and Cabaret cabinets, it is printed on a label on the back of the cabinet. On the Cocktail cabinet, the label is located on the start switch side of the cabinet. Verify that the same serial number is also on the Dig Dug game PCB, Regulator/Audio || PCB, power supply and video display. A drawing of the serial-numbered components is on the inside front cover of this manual. Please mention this number whenever you call your distributor for service. @ Check major subassemblies, such as the power supply, control panel and video display, for secure mounting. Set-Up Procedures
D. Game Installation
- Installation Requirements
Power 175 watts Temperature 0 to 38°C (32 to 100°F) Humidity Not over 95% relative Upright Cabinet 64 x 79 cm (25% x 31 in.) 174 cm (68% in.) Cabaret Cabinet 52 x 7834 cm (202 x 31 in.) 153% cm (60¥2 in.) Cocktail Cabinet 624 x 82V2 cm (24V2 x 32V%2 Space Required Game Height
Space Required Game Height
Space Required in.) Game Height 65 x 101 cm (25% x 39% in.)
- Voltage Selection The power supply used in this game operates on the line voltage of almost any country in the world. The power supply comes with either one, two, or three different voltage selection plugs. Plug volt: ages and wire colors are 100 VAC (violet wire color), 120 VAC (yellow wire color), 220 VAC (blue wire color), and 240 VAC (brown wire color).
Before plugging in your game, check your line voltage. Then check the wire color on the voltage selection plug that is plugged into your power supply. Make sure the voltage selection plug is correct for your location’s line voltage (see Figure 3-12).
go
1-5
Set-Up Procedures Dig Dug™
E. Cocktail Table Legs To ensure cabinet strength, you must use
two screws when attaching each table This cocktail-table cabinet may be adjusted to ‘eg. Using only one screw may result in four heights—65, 70, 76 or 101 cm (25%, 27%, 30 or damage to the cabinet wall when you 39% inches). To adjust the table height, refer to move the cabinet across the floor. Figure 1-2.
- Remove or empty the coin box to prevent loose coins from sliding out of the box and into the game cabinet. Lay the table on end as shown. Place a ‘support (the coin box, books or too! box) under the recessed side of the cabinet. Remove the two Allen-head screws on each leg. Grasp the legs and slide them into the desired position. Then replace the screws.
REMOVE COIN BOX USE TWO SCREWS
WHEN ATTACHING EACH TABLE LEG!
ut 39% in. 30in.
27% in.
SHIPPING POSITION (25% in.)
Figure 1-2 Adjusting the Table Legs
COIN COUNTER Dig Dug™
F. Switch Locations
- On/Off Switch The Upright and Cabaret cabinet on/off switch is located on the back of the cabinet, lower left side. The Cocktail cabinet on/off switch is located on the bottom of the cabinet (see Figure 1-3). Set-Up Procedures
- Utility Panel Switches For Upright and Cabaret cabinets, the utility panel includes the volume control, self-test and coin switches, and coin counter. The coin switch is used to credit the game without tripping the coin counter. These switches are located inside the upper coin door (see Figure 1-3).
UTILITY PANEL:
SELF-TEST
VOLUME CONTROL COIN (To increase, turn clockwise)
POWER ON/OFF SWITCH OPTION SWITCHES: SWITCH AT 9N {Game price and bonus options) SWITCH AT 9P (Game ditticulty, price and special options)
Figure 1-3 Game Switch Locations
Upright and Cabaret Cabinets
Set-Up Procedures 1 Dig Dug
OPTION SWITCHES: SWITCH AT SN (Game price and bonus options) SWITCH AT 9P (Game difficulty, price and special options)
VOLUME CONTROL {To increase, tur clockwise}
COIN SB SELF-TEST
UTILITY PANEL:
POWER ON/OFF SWITCH (Reach under game. to activate switch)
Figure 1-3 Game Switch Locations, continued Cocktail Cabinet
- Option Switches For the Cocktail cabinet, the utility panel includes Option switches, for all game cabinets, are lothe volume control, self-test and the coin switches. cated on the game PCB as follows: These switches are located under the table top. To ¢ Game price and bonus options are at PCB loca: locate the coin counter, remove the coin box (see tion ON. Figure 3-1). ¢ Game difficulty, price and special options are at PCB location 9P.
Dig Dug™
G. Option Switch Settings
Tables 1-1 and 1-2 detail game options and their settings. Options are preset at the factory and shown by the $ symbols. However, you may change the settings to suit your individual needs. Set-Up Procedures
Table 1-1 Game Price and Bonus Option Settings The 8-toggle switch at location SN is accessible when the Dig Dug™ game PCB is mounted in place. To change switch settings, set the self-test switch to on. Verify the changes on the self-test screen. Then turn the self-test switch to off. A“coin" is defined as 25%, 1DM or 1Fr. If you have a 2DM/1DM or 2Fr/1Fr coin door with two coin counters, set switch 8 at PCB location 9P to off. Then different denominations are counted on the two coin counters.
Settings of 8-Toggle Switch on Dig Dug PCB (at 9N)
| 8 | 7 | 5 | 4 | 3 | 2 | 1 | Option |
On = On 1 Dig Dug lite
| On | Off | 2 Dig Dug lives | |
| Off | On | 3 Dig Dug lives | $ |
| Off | Off | 5 Dig Dug lives | |
| On | On | On | |
| On | Off | On |
Off On On Off Off On Off On Off
| On | On | Off |
Off On Off On Off Off Off Off Off
| on | On | On |
| On | Off | On |
| On | On | Off |
| Olt | Off | Off |
Bonus lives awarded at the following point values: With 1, 2 or 3 Dig Dug lives With 5 Dig Dug lives No Bonus No Bonus First at 10,000, First at 20,000, second at 40,000, second at 60,000, and every 40,000 $ and every 60,000 Firsi at 10,000, First at 30,000, second at 50,000, second at 80,000, and every 50,000 and every 80,000 First at 20,000, First at 20,000, second at 60,000, second at 50,000 and every 60,000 First at 20,000, First at 20,000, second at 70,000, second at 60,000 and every 70,000 First at 10,000, First at 30,000, second at 40,000 second at 70,000 First at 20,000, First at 20,000 second at 60,000 First at 10,000 First at 30,000 Right coin mech—coin doors with 1 or 2 coin counters* 1 coin for 7 credits 1 coin for 6 credits 1 coin for 3 credits 1 coin for 2 credits 1 coin for 1 credit $ 2 coins for 3 credits 2 coins for 1 credit 3 coins for 1 credit
$Manufacturer’s suggested settings “See Table 1-2 for left coin mechanism.
1-9
Set-Up Procedures Dig Dug™
Table 1-2 Game Difficulty, Price and Special Options The table below contains the switch settings for options re- A special option allows for continuation of game play. If a player lating to game difficulty, price and special options. The switches is at a more advanced round when his game ends, he has 16 secare on the game PCB at location 9P, and are accessible when the onds to begin the next game at the same round. Another special PCB is mounted in place. option allows you to freeze the game action.
Settings of 8-Toggle Switch on Dig Dug PCB (at 9P) 7 5 4 3 2 6 1 Option a
On One coin counter $ Off Two coin counters* Left coin mech—coin doors with 2 coin counters
| On | On | 1 coin for 1 credit | $ |
| Off | On | 1 coin for 2 credits | |
| On | Off | 2 coins for 1 credit | |
| Oif | Off | 2 coins for 3 credits |
Off Normal game action $ On Freeze game action On Attract Mode sound $ Off No Attract Mode sound On Continuation of game play $ of No continuation of game play
| On | On | A—Easy game difficulty | |
| Off | On | B—Medium game difiiculty | $ |
| On | Off | C—Hard game difficulty | |
| Ott | Off | D—Expert game difficulty |
$Manutacturer's recommended settings “Coin doors with different denominations and two coin counters.
H. Self-Test Procedure
This game will test itself and provide data to show that the game’s circuitry and controls are operating Properly. The data is provided on the video display and speaker. No additional equipment is necessary.
We suggest you perform the self-test procedure when you first set up the game, any time you collect money from the game, when you change game options, or when you suspect game failure.
Refer to Figure 1-3 for the location of the self-test switch and option switches. To perform the self-test, set the self-test switch to on. After about eight seconds the self-test screen will be displayed.
To see game statistics, press the utility coin switch. To reset the high score table, simultaneously push and hold the pump and utility coin switches for 10 seconds. To end the self-test, set the self-test switch to off.
The complete self-test procedure is explained in Chapter 2, Self-Test Procedure. If any part of the test described in Figure 1-4 fails, refer to Chapter 2.
1-10
Dig Dug™ Set-Up Procedures
Figure 1-4 Self-Test Procedure
Instruction Test Passes
- Set the self-test switch to on (see Figure 1-3). Patterns appear on the screen. After about 8 seconds, the screen displays the picture below. The RAMs, ROMs and other chips are tested. If the picture is different from the picture below, refer to Chapter 2, Self-Test Procedure,
- Activate any control panel switch. Game sounds are produced, from SOUND 00 through SOUND
- Activating any control panel switch produces a new sound. Test ail switches this way. if test fails, refer to Chapter 2, Seif- Test Procedure. Game sounds:
Se SOUND 00 Credit issued
SOUND 01 Start of game SOUND 02 indication of highest score SOUND 03 Game over SOUND 64 Monster attacking Dig Dug SOUND 05 Dig Dug dies SOUND 06 Monster escaping SOUND 07 Bonus Dig Dug awarded SOUND 08 End of wave SOUND 09 Monster speeding up SOUND 10 Monster crushed by rock SOUND 11 Monster bursting SOUND 12 Rock hitting ground SOUND 13 Rock failing SOUND 14 Dragon spitting fire SOUND 15 Dig Dug throwing harpoon SOUND 16 Dig Dug pumping up monster SOUND 17 Dig Dug walking SOUND 18 Monster moving SOUND 19 Dig Dug capturing vegetable SOUND 20 Enter initials into high score table
ALL RAMS GOOD
ALL ROMS GOOD
TYPE OF CABINET
LEFT COIN MECH >1 COIN 1 CREDIT
RIGHT COIN MECH 1 COIN 14 CREDIT
NO. OF LIVES RANK B
DIFFICULTY = SOUND 04 SOUNDS 1ST BONUS FOR 10000 PTS
2ND BONUS FOR 40000 PTS -+—~ BONUS LEVELS GAME STATISTICS: AND FOR EVERY 40000 PTS THE COUNT STARTS AT 999999) AND DECREASES. For example, if you play 10 games, the game subtracts 10 from = 99.9999 .9999 .9999 .9999 . 99.9 and the display shows 98.9 for the 7 fi. vo number of games played. (Disregard decimal points.)
NO. OF GAMES NO. OF POINTS NO. OF SECONDS NO. OF BONUS PLAYED (times 10) PLAYED LIVES AWARDED
1-11
Set-Up Procedures
I. Game Play
The Dig Dug™ game is a one- or two-player game with a color raster-scan video display. The screen shows a cutaway view of the land, most of which is below ground. The player controls the Dig Dug character who travels through and digs tunnels in the dirt. The object is for Dig Dug to destroy monsters by pumping them up or dropping rocks on them and to capture vegetables.
The third picture simulates game play. Dig Dug walks through underground tunnels. Monsters chase him and he periodically pumps them up or drops rocks on them. This picture ends when Dig Dug is destroyed.
- Attract Mode The attract mode begins when power is applied to the game, after a play or high-score mode, or after self-test. This mode is continuous and stops only when a credit is entered, or when in self-test. This mode may last for about one minute and fifteen seconds. In the attract mode, the screen displays one of four possible pictures.
In the first picture, Dig Dug enters the screen from the top right and walks across the surface. He digs a tunnel into the ground and begins to dig around the words DIG DUG. Meanwhile, monsters escort the word ATARI across the top of the screen. When Dig Dug digs entirely around the words DIG DUG, these words, ATAR/ and the monsters fall down to a new position on the screen. Everything in the picture rolls up except the words DIG DUG.
In the second picture, game characters appear on the screen. Dig Dug is between FYGAR, the firebreathing dragon, and POOKA, the fat monster. First, Dig Dug pumps up POOKA until he explodes and disappears, and 200-500 (points) appears in his place. Then, Dig Dug pumps up FYGAR until he explodes and disappears, and 200-1000 appears in his place.
The third picture simulates game play. Dig Dug walks through underground tunnels. Monsters chase him and he periodically pumps them up or drops rocks on them. This picture ends when Dig Dug is destroyed.
The fourth picture shows the high-score table. The top five scores, round played and matching initials appear on the screen.
During the attract mode, the high score and score(s) for one or both players appear at the top of the screen. Credits or number of Dig Dug lives and Dig Dug™
the round number appear at the bottom of the screen. This mode ends when coins are inserted and accepted for game play.
- Ready-to-Play Mode
During this mode, the high score and score(s) for one or both players appear at the top of the screen. The words PUSH START BUTTON, 1 PLAYER ONLY or 1 OR 2 PLAYERS and bonus life information ap- Pear in the center of the screen. ATARI copyright, credits and the round number appear near the bottom of the screen. This mode ends when a player pushes the start button.
- Play Mode
This mode begins when Dig Dug enters the screen from the top right and walks across the surface. He digs down to the center of the screen. The words PLAYER 1 READY or PLAYER 2 READY appear on the screen. Also, high score and score(s) for one or both players appears at the top of the screen. The number of Dig Dug lives and the round number appear at the bottom of the screen.
Game play takes place on a cutaway section of the land. The characters are Dig Dug and two monsters, one of which is a fire-breathing dragon. The underground area is divided into four different colored layers of dirt. Rocks are scattered in the dirt. The sky is at the top of the screen.
The player controls Dig Dug. He moves through horizontal and vertical tunnels. When Dig Dug digs new tunnels he moves slowly. When he is on the surface or in an existing tunnel, he moves faster. The object of the game is for Dig Dug to destroy all the monsters and go to the next round.
Dig Dug™
Monsters are trapped in caves. A monster may get out of a cave two ways. Dig Dug may dig him out. Then, the monster chases Dig Dug. The monster may also get out of the cave by turning into a ghost. As a ghost, he cannot be destroyed. The ghost does not travel in the tunnels. He travels through the dirt, and can travel diagonally. However, he reappears as the monster when he goes into a tunnel.
The monster moves faster than Dig Dug in vertical tunneis and slower on the surface. He destroys Dig Dug by catching him. In addition, the dragon destroys Dig Dug by breathing fire on him. The dragon only breathes fire horizontaily. The fire can penetrate the dirt.
Dig Dug destroys the monsters by pumping them up until they burst, or by causing rocks to drop on them. To pump up and destroy a monster, the player presses and holds down the pump button. It is possible to stun a monster for a few seconds by pressing the pump button once or twice. While a monster is stunned, Dig Dug may pass over him without being destroyed. If two monsters are very close together, only one may be stunned. The other will catch and destroy Dig Dug.
Dig Dug must dig tunnels under the rocks to get them to drop. A rock may fall in a vertical or a horizontal tunnel. A rock also goes through a thin layer of dirt from one tunnel to the next. In a vertical tunnel, Dig Dug may stay directly under a rock and it will not drop. However, in a horizonta! tunnel, Dig Dug must move out from under a rock right away, or he will be crushed.
After two rocks are dropped, a vegetable (worth extra points) appears in a tunnel in the center of the Set-Up Procedures
screen. A player has 10 seconds to capture (touch) the vegetable or it will disappear. There is only one vegetable per round.
The game progresses by rounds. Round 1 starts with four monsters and three rocks. The vegetable is a carrot. One flower on the surface (top right of the screen) represents Round 1. Two flowers represent Round 2, etc. As the rounds progress, the monsters move a little faster, and are better at avoiding falling rocks. In each round, the last monster tries to escape. If he is not caught by Dig Dug, he exits on the surface (top left).
The game ends when all of the Dig Dug lives are used up. A player may continue to play at the same round (level) by following instructions on the screen. He has 16 seconds to insert a coin(s). Then he must push and hold the pump and start buttons at the same time.
- High Score Mode
This mode begins when a player has one of the five top scores. A player enters his initials in the center of the screen. The initials are then transferred to the table. To reset the high-score table, set the self-test switch to on. Simultaneously push and hold the pump and utility coin switches for 10 seconds. Then set the self-test switch to off.
- Hints for Game Play @ Get many monsters to follow you. Then dig a long vertical tunnel up to a rock. Drop the rock by digging right or left. @ Dig Dug may take extra time to turn. It is better to start turning early than to wait until the last second. @ Destroy monsters at bottom dirt level for more points. @ Use PUMP to stun monsters. Then you may escape or walk through them. @ Don’t stop next to dragon when he is in a cave. His fire can go through a thin layer of dirt and destroy you. @ A vegetable appears after two rocks have been dropped. So be sure to drop two rocks in each round,
Set-Up Procedures.
Table 1-3 Dig Dug™ Scoring
Dirt Layer RON Bursting Monsters
POOKA
- Worth % amount vertically
Dropping Rocks
Monsters Destroyed
Vegetables
Round Vegetable 1 Carrot 2 Rutabaga 3 Mushroom 4 Cucumber 5 Cucumber 6 Eggplant 7 Eggplant 8 Bell Pepper 9 Sell Pepper 10 Tomato: a Tomato 12 Onion 13 Onion 14 Watermelon 15 Watermelon 16 Galaxian 7 Galaxian 18 and above Pineapple
Digging a new tunnel is worth 10 points per % inch (1.61 cm). Points 1000 2800 4000 6000 8000 10,000 12,000 15,000 FYGAR™
1000
Points for Capture
1000 1000 2000 2000 3000 3000 4000 4000 5000 5000 6000 6000 7000 7000 8000 Dig Dug™
Troubleshooting
Ge
A. Introduction
This game tests itself when the self-test switch is set to the on position. If there is a failure, the game produces audiovisual aids to help you isolate the failing portion of the game. The self-test procedure included in Chapter 1 is to help you decide if the game is or isn’t working properly. The expanded procedures in this chapter are included to help the qual-
n a ified electronic technician determine why the game
isn’t working properly.
B. Comments on Troubleshooting
When troubleshooting, first determine the symptom(s) of the failure. After determining the symptom, look over the wiring diagram and determine what assemblies could cause the failure. Could it be caused by the power supply, Regulator/Audio Il PCB, or the video display?
The next step is to check all harness wires and connectors to the Suspected failing assembly. If you find no harness or connector problem, substitute an assembly known to be good for the suspected failing assembly. If the game functions properly, you have successfully isolated the failure. If it doesn’t, repeat the procedure with another assembly.
When you have isolated the failing assembly, you must troubleshoot that assembly and make the necessary repairs. It the display is failing, we suggest that a qualified video display technician handle the troubleshooting and repair. If the power supply or Regulator/Audio Il PCB is failing, troubleshooting and repair is relatively simple, as these assemblies are not too complicated. \f the game PCB is failing, troubleshooting and repair will greatly depend on your understanding of the operation of this PCB.
To effectively troubleshoot problems of the game PCB, it is necessary for you, the technician, to become familiar with the PCB’s hardware. The diagrams in the schematic package (included with the game) show the functions of the circuitry. Again, while troubleshooting this PCB, first determine the symptom of the failure, then locate the suspected area on the schematic diagram. Dig Dug™
C. Self-Test Procedure
To enter Self-Test, set the self-test switch to the on position. Patterns appear on the screen. After about 8 seconds, the self-test screen is displayed (see Figure 2-1). See Chapter 1, Section H, Self-Test Procedure for a complete description of this part of the self-test.
RAM OK ROM OK UPRIGHT 1 COIN 1 CREDIT 1 COIN 1 CREDIT DIGDUG 3 RANK B SOUND 04 1ST BONUS FOR 10000 PTS 2ND BONUS FOR 40000 PTS AND FOR EVERY 40000 PTS
Figure 2-1 Self-Test Screen 1 Test Passes
Dig Dug™ Troubleshooting
To go to screen 2, set the self-test switch to off and immediately to on again.
SCREEN 2: ji z i A white crosshatch pattern appears on the screen Figure 2-2_ Self ‘Test Screen 1 (see Figure 2-3). Use this pattern for convergence Test Fails (see the raster-scan video display manual).
SCREEN 1:
RAM FAILURE is indicated by the word RAM and a pair of alphanumeric characters displayed at the top of the screen. The following table lists the bad RAM chip and its location. Bad RAM chip location Screen Display on game PCB RAM OL 4k RAM OH 4k RAM 1L. 4k RAM 1H 4K RAM 2, 7R RAM 2H. 7P. RAM 3L. 7 RAM 3H 7K RAM 4L 7N RAM 4H 7M
ROM FAILURE is indicated by the word ROM and a number displayed at the top of the screen. The following table \ists the bad ROM chip and its location.
Bad ROM chip location Screen Display on game PCB ROM 1 2cID ROM 2 2E ROM 3 2BiC ROM 4 2a ROM 5 2p ROM 6 2N ROM7 ai Figure 2-3 Self-Test Screen 2
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
Maintenance, Repair =>
and Parts
~ 2y)
pe
In addition to maintenance and repair information, this chapter provides the necessary information for you to order parts for your Dig Dug game. Please note that common hardware has been defeted from most of the parts lists. This includes screws, nuts, washers, bolts, etc.
The parts lists are arranged in alphanumeric order. For example, all “A-” prefix numbers come first. Following this are numbers in sequence evaluated up to the hyphen, namely 00- thru 99-, then 000598-thru approximately 190000-.
When ordering parts, please give the part number, part name, applicable figure number of this manual, and serial number of your game. This will help to avoid confusion and mistakes in your order. We hope the results will be less downtime and more profit from your game.
Atari Customer Service numbers are listed in the front of this manual for your convenience.
Chapter
Maintenance, Repair and Parts Dig Dug™
A. Cabinet-Mounted Assemblies
Schematics, Self-Test Label & Manuals— it foll e Fluor. Tube & Speaker Assy.— 036498-01 See parts list on following pag
see Figure 3-5 (Upper Ret.)
03827301 038274-01 “Ge (Attract. Glass/Graphies) (Shield) 178034-024
(TE-Maiding)
Video Display— toner tery see Figure 3-6 ower Re! 71-2110 {Lock}
| 03649501 | = | p | 78-6900402 |
(Grille) / (Tape)
Control Panel Assy.— see Figures $2, 3-3 & 3-4 t A002465-01 (Coin Counter) A038004-01 (Util. Sw. Harn.) 69-001 Seaton
| (SettTesi Sw.) | é | 2 | 034536-03 |
(Vibra, Damper) 03741902 (Access Panel)
62.041
| (Coin Sw} | 5 | & | A038295-01 |
( (Main Harn, Assy) Game PCB Assy.— see Figures 3-9 & 3-10 \ 034536-02 19-9032 (Vol. Ctrl.) Macedo Vira. Damper) see Figure 3-7 «Knob) , A038297-01 (Power Harn Assy.) 038003-01 Se ; 178048-001
| (Util, Pri) | iv | (Caster) |
009992.01 A037491-01 (On/Off Sw. Cvs) (Coin Box)
A038256-01 . (Cabinet Assy.) Power Supply Aesy 8037470-01 (On/Off Sw.)
RegJAudio I! PCB Assy.— see Figures 3-9& 3-41 = A037453-03, (Leg A037454.03 & A037455.03 (Power Cord) Figure 3-1 Cabinet-Mounted Assemblies Upright Cabinet
3-2 AoMe S01 D
Dig Dug™ Maintenance, Repair and Parts
Figure 3-1 Cabinet-Mounted Assemblies, continued Upright Cabinet Parts List
Part No. Description A002465-01 6V Coin Counter
| A037453-03 | Strain-Relief Power Cord | (U.S.) |
A037454-03 Strain-Relief Power Cord (Austria, Belgium, Chile, Denmark, Finland, France, Germany, Greece, Indonesia, italy, Netherlands, Norway, Spain, Sweden, and Uruguay)
| A037455-03 | Strain-Relief Power Cord | (Australia and New Zealand) |
A037470-01 Power On/Off Switch and Mounting Plate Assembly A037491-01 Coin Box A03800401 Utility-Switch Panel Harness Assembly
| A038256-01 | Cabinet Assembly | (inciudes legs and PCB retainers, but not the rear access panel) |
A038295-01 Main Harness Assembly A038297-01 Power Harness Assembly The following four items are the technical information supplements to this game: SP-203 Dig Dug™ Schematic Package ST-203-01 Dig Dug Label with Self-Test Procedure and Option Switch Settings TM-160 Service Manual for 19-Inch Electrohome Color Raster-Scan Display Substitute TM-201 when using Wells-Gardner Display no. 92-055 Substitute TM-197 when using Matsushita Display no. 139003-1004 or -1204 Substitute TM-205 when using Sanyo Display no. 139003-1005 or -1205 TM-203 Dig Dug Operation, Maintenance and Service Manual 19-9032 Volume Control 62-041 SPOT Momentary-Contact Pushbutton Utility Coin Switch with Black Cap 69-001 DPODT Self-Test Switch
| 71-2110 | Lock Mechanism | (for rear access panel) |
78-3201 Cabinet-Leveling Leg 78-6900402 Vinyl Foam Single-Coated Adhesive Tape, ¥%-Inch Wide x }inch Thick (24 in. required) 003053-01 Lower Attraction Glass Retainer 009992-01 OnlOff Switch Cover 034536-02 Foam Vibration Damper (for Regulator/Audio /1 PCB)
| 034536-03 | Foam Vibration Damper | (for Dig Dug Game PCB) |
036495-01 Speaker Grille 036498-01 Upper Attraction Glass Retainer 036686-01 Card of Game Pricing Labels (not shown in illustration)
| 037419-02 | Rear Access Panel | (does not include lock) |
| 037332-01 | Ventilation Grille | (located on cabinet top) |
038003-01 Utility Switch Panel for Volume Control, Self-Test Switch, Coin Switch and Coin Counter 038273-01 Attraction Glass with Graphics 038274-01 Video Display Shield with Graphics 178013-001 Spring Draw Latch 178034-024 %-Inch Black Plastic Molding 178048-001 2-Inch Rigid Caster 178070-001 Volume Control Knob
Maintenance, Repair and Parts Dig Oug™
Schematics, Self-Test Label & Manuals— see parts list on following page
A038321-01 037515-01 Video Display— (Cabinet Assy, (Retainer) see Figure 3-6
037511-02 71-2110 178034-024 (T-Moiding) B (Access Panel) (Lock)
Joystick Assy.— see Figure 3-4
Control Panel Assy.— see Figures 3-2, 3-3 & 3-4 RegJAudio II PCB Assy.— 78-6900402 see Figures 3-9 & 3-11 (Tape)
178013-001 (Latch) 037259-01 038326-01 (Display Brkt) (Attract. Pr.)
036891-01 (Grille) 148001-001 (Speaker) Coin Door Assy.— see Figure 3-7
037495-01 (Util. Pni. Bracket)
A002465-01 (Coin Counts (Coin Counter) 034536-03 19-9032 (Vibra. Damper) (Vol. Ctrl.) 69-001 (Self-Test Sw.) Game PCB Assy.— 62-041 see Figures 3-9 & 3-10 (Coin Sw.)
A037491-01 (Coin Box) A038392-01 (Main Harn. Assy.)
(A038393-01 (Power Harn. Assy) ags7470-01 Power Supply Assy.— (On/Off Sw. Assy.) see Figure 3-12
009992.01 (OnlO#t Sw. Cvr,) A037453-03, A037454-03, n037456.03 or 78-9201 (Power Cord) (Leg)
Figure 3-1 Cabinet-Mounted Assemblies, continued Cabaret Cabinet
34 ADSB3200x B
Dig Dug™ Maintenance, Repair and Parts
Figure 3-1 Cabinet-Mounted Assemblies, continued Cabaret Cabinet Parts List
Part No. Description A002465-01 Coin Counter
| A037453-03 | Strain-Relief Power Cord | (U.S.) |
| A037454-03 | Strain-Relief Power Cord | (Austria, Belgium, Chile, Denmark, Finland, France, Germany, Greece, |
Indonesia, Italy, Netherlands, Norway, Spain, Sweden, and Uruguay)
| A037455-03 | Strain-Relief Power Cord | (Australia and New Zealand) |
A037470-01 Power On/Off Switch and Mounting Plate Assembly A037491-01 Coin Box
| A038321-01 | Cabinet Assembly | includes PCB retainers and legs, but not rear access panel) |
A038392-01 Main Harness Assembly A038393-01 Power Harness Assembly The following four items are the technical information supplements to this game: SP-203 Dig Dug™ Schematic Package ST-203-01 Dig Dug Label with Self-Test Procedure and Option Switch Settings TM-160 Instruction and Service Manual for 19-Inch Electrohome Color Display Substitute TM-201 when using Wells-Gardner Display no. 92-055 Substitute TM-197 when using Matsushita Display no. 139003-1004 or -1204 Substitute TM-205 when using Sanyo Display no. 139003-1005 or -1205 TM-203 Dig Dug Operation, Maintenance and Service Manual 19-9032 Volume Control 69-001 DPDT Self-Test Switch 71-2110 Panel Cartridge Lock Mechanism (for rear access panel) 78-3201 Cabinet-Leveling Leg 78-6900402 Vinyl Foam Single-Coated Adhesive Tape, ¥%4-Inch Wide x !4-Inch Thick 009992-01 On/Off Switch Cover 034536-03 Foam Vibration Damper (for both PCBs) 036686-01 Card of Game Pricing Labels 036891-01 Speaker Grille 037495-01 Bracket for Volume Control, Self-Test Switch and Coin Counter(s)
| 037511-02 | Rear Access Panel | (does not include lock) |
037515-01 Upper Display-Shield Retainer 037529-01 Display Bracket 038326-01 Attraction Panel with Graphics
| 038331-01 | Side Panel Decal | (not shown in ifustration) |
148001-001 6x 9Inch 4-Ohm 15W Oval High-Fidelity Speaker 178013-001 Spring Draw Latch 178034-024 Black Plastic T-Molding, 34-Inch Wide 178070-001 Volume Control Knob
Maintenance, Repair and Parts Dig Dug™
82-406 78-6900401 (Eyebort) (Tape) 03585201 (Bracket)
a = 038365-02 e (Table Top)
037681-01 (Bezel) 035851-01 (Hinge)
034536-03 036774-01 (Vibra. Damper} (Grille)
: 037686-01 178015-001 \ = Support) \ mt008A Video Display— reSon39 see Figure 36 A037756-02 (Display Assy.) 037781-01 (Security Bar) 037833-01 (Bar Bracket)
037827-01 (Backplate) A038370-01
71-2110 ne |e (Cab. Base Assy.) | (Lock)
038354-01 74-3201 (Access Pri.) (Washer)
(Leg) 03729201 {Leg Supp. Assy.)
178034024 eee
(Molding) (Leg Assy.) 036773-01 78-3205 178034.025 (Grille) (Endcap) (-Molding) a aa
Figure 3-1 Cabinet-Mounted Assemblies, continued Cocktail Cabinet
AaRAaI-% 8
Dig Dug™ Maintenance, Repair and Parts
Schematics, Self-Test Label & Manuals— see parts list on following page
78-6300402 (Tape) 178034-026 ¢FAtolding) |
035867-02 (Overlay) Game PCB Assy.— 03676401 see Figures 3-9 & 3-10 (Cam) 038366-01 (Glass Top) A038378-01 a (Harmess) 038090-01 (Clamp) 037792-01 (Mtg. Bracket) RegJAudio Il PCB Assy.— Joystick Assy— i see Figures 3-9 & 3-11 see Figure 3-4 Control Panel Assy.— so 69-001
| see Figures 3-2 & 3-3 | Ww | a | (Self-Test Sw.) |
037768-01 y voren -( (Vol. i Gaitle) (Vol. Ctl) 03786501 178070-001 A038380-01 | (Power Ham) + A Roy r (Uti, Bracket) Kae) f 62-039
| Power Supply Assy.— | a | > | S | (Start Sw.) |
see Figure 3-12 62-041 2alli (Coin Sw.)
A037884-02, iS J 75-9910NO 03788601, (Nut) ‘A037887-01 or % ‘A037888-01 oe WW Ss 48-004
| Ronee) | A. | SA | (Speaker) |
Ay 000869.01 A037470-01 (Spkr. Grille) (OrvOff Sw. & Mtg. Assy.) 009992-01 (Oni Sw. Cvr) Site eee Coin Door Assy.— (Start Sw. Bracket) 03677501 see Figure 38 036895-01 (Coin Box) (Sw. Bezel) 03775301 ‘A002465-01 (Ret. Bracket) (Coin Ctr.)
Figure 3-1 Cabinet-Mounted Assemblies, continued Cocktail Cabinet
Maintenance, Repair and Parts Dig Dug™
Figure 3-1 Cabinet-Mounted Assemblies, continued Cocktail Cabinet Parts List
Part No. Description A002465-01 Coin Counter A005133-01 Cooling Fan (optional equipment) A036775-01 Coin Box Assembly (includes lock) A037246-01 Leg Assembly (includes leg, 2 adjustable feet and 2 endcaps)
| A037292-01 | Leg Support Assembly | (inc/udes 2 panel nuts and endcap) |
A037470-01 On/Off Switch and Mounting Plate Assembly A037756-03 14-Inch Color Video Display Assembly A037884-02 Strain-Relief Power Cord (United Kingdom, Ireland, Lebanon, Saudi Arabia, India, Hong Kong, Singapore, Egypt, Nigeria, Republic of South Africa, Zimbabwe)
| A037886-01 | Strain-Relief Power Cord | (U.S.) |
| A037887-01 | Strain-Relief Power Cord | (Austria, Belgium, Chile, Denmark, Finland, France, Germany, Greece, |
indonesia, Italy, Netherlands, Norway, Spain, Sweden, and Uruguay)
| A037888-01 | Strain-Relief Power Cord | (Australia and New Zealand) |
A038370-01 Cabinet Base Assembly (inc/udes grilles, PCB retainers, leg backplate and hinges) A038378-01 Main Harness Assembly A038380-01 Power Harness Assembly The following four items are the technical information supplements to this game: ‘SP-203 Dig Dug™ Schematic Package ST-203-02 Dig Dug/Cocktail Label with Self-Test Procedure and Option Switch Settings TM-187 Service Manual for 14-Inch Electrohome Color Raster-Scan Monitor TM-203. Dig Dug Operation, Maintenance and Service Manual 19-3032 50-Ohm, 12%2W Wire-Wound Rheostat (for volume control) 48-004 8-Ohm, 5W 5-Inch Round High-Fidelity Speaker 62-039 Momentary-Contact SPDT Light-Emitting-Diode Switch with Red Cap 62-041 SPDT Momentary-Contact Pushbutton Utility Coin Switch with Black Cap 69-001 DPOT Self-Test Switch 71-2110 Panel Cartridge Lock Mechanism (for table top) 71-3201 Anchor Washer for Table Top Locks 74-3003A, #10 x %_-Inch Aluminum Tubular Spacer (for table top support)
| 75-9910NO | #5,-11 Steel Stamped Nut | (for utility coin switch) |
78-3205 Square Black Endcap for Leg Assembly 78-3206 Cabinet-Leveling Leg 78-6900401 Viny| Foam Single-Coated Adhesive Tape, %4-Inch wide x }.Inch thick 78-6900402 Vinyl Foam Single-Coated Adhesive Tape, %-Inch Wide x Inch Thick (12 inches required) 82-406 #%-20 x 2-Inch Eyebolt with 34-Inch Threads 000869-01 Speaker Grille 009992-01 On/Off Switch Cover 034536-03 Foam Vibration Damper 035851-01 Table Top Hinge 035852-01 Corner Bracket for Table Top 035867-02 Smoke-Color Acrylic Display Overlay 036764-01 Hook-Type Cam for Lock 036773-01 Cabinet Base Grille 036774-01 Upper End-Panel Grille 036895-01 Black Molded Switch Bezel 037335-01 Leg Brace 037681-01 Cardboard Display Bezel 037686-01 Slip-In Cabinet Grille (above control panel) 037753-01 Coin Acceptor Retaining Bracket [Continued on next page]
Dig Dug™ Maintenance, Repair and Parts
Figure 3-1 Cabinet-Mounted Assemblies, continued Cocktail Cabinet Parts List
Part No. Description 037768-01 Fan Grille (fan is optional—see part no. A005133-01) 037791-01 Security Bar 037792-01 Display Mounting Bracket 037827-01 Backplate for Attaching Leg
037833-01 Security Bar Bracket 037865-01 Bracket for Volume Control, Self-Test and Utility Coin Switches 038090-01 Video Display L-Clamp 038354-01 Service Panel 038365-02 Wood Table Top 038366-01 Tempered-Glass Table Top with Graphics 038385-01 Start Switch Mounting Bracket 178015-001 Hinged Table Top Support
| 178034-024 | %-Inch Black Plastic T-Molding | (for center cabinet base) |
| 178034-025 | 25,,-Inch Black Plastic T-Molding | (for cabinet ends) |
| 178034-026 | ‘%,-Inch Black Pastic T-Molding | (for table top) |
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
Dig Dug™
B. The Control Panel
Prior to removing or repairing any switch on the control panel, unplug the game.
To Open the Control Panel Upright and Cabaret Cabinets:
- Open the coin door. Reach up through the opening and release the spring-draw latches. They are on the cabinet side walls at each end of the control panel.
- Lift up on the control panel at the top edge, and tilt it toward you. The display shield has foam tape applied to it to cushion the shield and prevent liquids from entering the cabinet interior. Make sure this tape is in good condition.
Cocktail Cabinet:
- Remove the two sets of button-head screws and iock washers at the top edge of the control panel. Then, tilt ihe control panel toward you.
Leaf Switch Repair: @ Adjust the leaf switches for a narrow gap. When a switch button is depressed, the resulting wiping action of the cross-bar contacts provides a self-cleaning feature. Don’t burnish the contacts. To clean them, use electrical contact cleaner.
Figure 3-2
Maintenance, Repair and Parts
@ To replace a leaf switch, remove the screw with a Phillips-head screwdriver. @ To replace tne switch bution, turn the stamped nut with a wrench in a counterclockwise direction, as seen from the inside of the control panel. The ring on the outside of the control panel should noi spin, due to its design. @ Reinstall the switch, Reconnect the harness wires as shown in the Schematic Package, Game Wiring Diagram. Make certain the right colors go to the right tabs ‘on the switch.
LED Start-Switch Replacement: The LED switches have a very low failure rate. If a switch should ever be suspect, first test it using the directions that follow.
To Test LED Switch: @ Remove the wires from the suspected switch. @ Attach the leads of an ohmmeier to normally open and common contacts. @ Check contacts (push and release the switch button) for closed and open continuity. @ If the contacts do not operate sharply or always remain closed or open, then replace the LED switch.
To Replace LED Switch: @ Remove all wires from the faulty switch. @ Turn the switch counterclockwise while holding the black cone-shaped bushing on the outside of the control panel. @ Install a new switch using the reverse procedure. @ Reconnect the harness wires as shown.
The Control Panel
Maintenance, Repair and Parts Dig Dug™
A038269-01 (Cont. Pni (Decal) 038267-01 (Cont. Pri.) | 038268-04
Players may receive an electric shock if this control panel is not properly grounded! After servicing any parts on the panel, check that the 171016-001 : ‘ (Decal) ground wire is firmly attached to the metal tab Unystick meters on the inside of the control panel. Only then ou should you lock up the game. A038322.01 ne (Ctrl. PniDecal) td oe? 62-039 038324.01 (Start Sw) (Ctrl. Pl) NOTE 038325-04 Cocktail cabinet ED is on a separate (ecal) panel (not shown in this illustration)
(Bezel)
178030-003 75-9910NO A038369-01 (Pushbutton) «Nut (Cont. Pni/Decal)
038376-01 (Cont. Pn.) A A038299-01 160013-001 03836704 FF] Hames) (Leaf Sw./Btn, Hide) (eca A038382-01 ER) “Carness)
LED CONTACTS— | Fl START 1
WHITE BROWN(-) pi Og OPEN 1 Ly cy COMMON CONTACT LED CONTACTS. [ji START 1
= WHITEIRED WHITE/BROWN (-) L=EL paral OPEN RED(+ ty
START 2
= WHITE/YELLOW WHITE/ORANGE (-) piped OPEN RED(+) ah BLACK Ltsh Bonmon CONTACT RED( +) BLACK COMMON CONTACT
START 2
YELLOW NORMALLY OPEN CONTACT ORANGE(-)
RED(+)——" BLACK Ls COMMON CONTACT
Figure 3-3 Control Panel Assembly
A03Bz70-01 © sowesaso1 312 AC38368-01 A
Dig Dug™ Maintenance, Repair and Parts
Figure 3-3 Control Panel Assembly, continued Parts List
Part No. Description
Upright Cabinet A038269-01 Control Panel with Decal A038270-01 Controi Panel Assembly A038299-01 Control Panel Harness Assembly 038267-01 Control Panel 038268-04 Control Panel Decal Cabaret Cabinet A038299-01 Control Panel Hamess Assembly A038322-01 Control Panel with Decal A038323-01 Controt Panel Assembly 786900402 Vinyl Foam Single-Coated Adhesive Tape, “4-Inch Wide x \-Inch Thick (24 in. required) 038324-01 Control Panel 038325-04 Control Panel Decal Cocktail Cabinet A038368-01 Control Panel Assembly A038369-01 Control Panel with Decal A038382-01 Control Panel Harness Assembly 038367-04 Control Panel Decal 038376-01 Control Panel For Upright, Cabaret, and Cocktail Cabinets 75-9910NO #5,-11 Steel Stamped Nut 62-039 SPDT Momentary Pushbutton Start Switch with Red Light-Emitting Diode 036895-01 Black Molded Switch Bezel 160013-001 Leaf Switch and Button Holder (leaf switch only is part no. 160012-001) 171016-001 Joystick Assembly 178030-003 Black Pushbutton Assembly
3413
Maintenance, Repair and Parts Dig Dug™
Prior to removing or repairing the joystick, unplug the game. 99-080028 (Shatt)
To Repair the Joystick: 99.080026 (Washer) 1, First, remove the entire joystick assembly from the control panel (see Figure 3-3). Now locate the tour screws in ihe plastic joystick frame and remove these screws.
- Next, remove the clip ring from the bottom of the shaft. The assembly will come apart.
- To replace the bellows, pry it up and out of the plastic frame. @ Reassemble in reverse order. @ Note that the inner raised ring on the bellows is longer on one side. This side goes on the top of the assembly (toward the control knob). 99-080035 (Top Plate)
- To replace a /eaf switch, you don’t need to disassemble the joystick. @ Using your thumbs, pry apart the plastic flanges on the switch holder. With your index finger, lift the
switch up so that it will clear the plastic tab located 98-080029
, n on the outside end of the switch holder. (Washer) ®@ Slide the switch out of its holder, Replace the switch in reverse order. Adjust the switch for a narrow gap.
99-080031 \ (Bellows)
99-080025 Disassemble in the order indi- 98-080032 (Switch) cated. (Circled numbers match (Steel Washer) the numbered instructions.)
99-080030 (Spring)
99-080034 (Sw Piate)
99-080033 (Guard Actuator)
99-080027 (Sw Actuator) 82-AL616 < (Screw) { SJ — 73-3003 a ©) “Ring
Figure 3-4 Joystick Assembly
3-14 171916-001
Dig Dug™
UP: Maintenance, Repair and Parts
JOYSTICK— TOP REAR VIEW
LEFT: BLUE, BLACK
DOWN: VIOLET, BLACK
WHITE/BLACK, BLACK
RIGHT: GREY, BLACK
Figure 3-4 Joystick Assembly, continued Parts List
Part No. Description
A038404-01 Joystick Harness
73-3003 Retaining Ring 82-AL616 #6 x 1-Inch Cross-Recessed Pan-Head Type BT Tapping Steel Screw 99-080025 Leaf Switch 99-080026 2-Inch Black Plastic Washer 99-080027 Nyion Switch Actuator 99-080028 Metal Shaft 99-080029 Nylon Washer 99-080030 Spring 99-080031 Bellows 99-080032 Flat Steel Washer 99-080033 Plastic Guard Actuator 99-080034 Switch Mounting Plate 99-080035 Top Plate 171016-001 Joystick Assembly
3-15
Maintenance, Repair and Parts Dig Dug™
C. Fluorescent Tube and Speaker
To Replace Fluorescent Tube: i
- At the top front of the game, remove the three screws that secure the upper attraction-panel retainer to the cabinet. Loosen the three screws that secure the lower retainer to the cabinet. Lift the attraction panel up and out of its lower retainer.
- Remove the cardboard locking tab at each end of the tube.
- Slightly rotate the tube up or down, and carefully remove it from the lampholders. Replace with a new tube. Do not snap the tube in vigorously—you may break it, causing an implosion! Replace the locking tabs.
- Check that the green ground wire is securely attached to the iarge metal bracket and the ballast transformer on the wood panel. If the tube is not grounded, it may not start.
To Replace Speaker:
- Remove the two Phillips screws that secure the light board to the cabinet. Slide the board out and unplug the 5-pin harness connector. Remove the board from the cabinet.
- Unplug the two plug-in connectors on the speaker. Remove the hardware that attaches the speaker to the board. Replace the speaker, reattach the plug-in connectors, reinstall the wood board and reconnect the harness.
Disassemble in the order indicated. (Circled numbers match the numbered instructions.)
Figure 3-5 Fluorescent Tube and Speaker
Upright Cabinet
Dig Dug™ Maintenance, Repair and Parts
179035-001 (Lampholder)
4037457-01 79-561816P (Harness) (Wire Nut)
70-304 (Tube) 142028-xxx (Transformer) 99-11003 Gtarter) A037540.01 (Grd. Wire) 99-11009 (Socket) 99.1106 (Tab)
Figure 3-5 Fluorescent Tube and Speaker, continued Upright Cabinet Parts List
Part No. Description
A037417-01 & -02 Fluorescent Tube and Speaker Assembly A037457-01 Light and Speaker Harness A037540-01 Ground Wire with Ring Lug 70-304 18-Inch 15W Cool White Fluorescent Tube 79-561816P_ Spring-Connector Wire Nut for 16- to 18-Gauge Wires 99-11003 Fluorescent Lamp Starter 99-11006 Fluorescent Lamp Locking Tab (tab consists of two pieces) 99-11009 Starter Socket
037469-01 Steel Lamp Bracket 142028-001 60 Hz 118V Ballast Transformer (used on A037417-01 assembly) 442028-002 50 Hz 118V Ballast Transformer (used on A037417-02 assembly) 148001-001 6 x 9Inch 4-Ohm 15W Ovai High-Fidelity Speaker 179035-001 2-Pin Fluorescent Lampholder
AOITAIP xX GS 347
Maintenance, Repair and Parts Dig Dug™
+ s 2. Remove the wood screw and fiat washer used to secure D. Video Display the rear of the Upright display chassis to a wood cleat. Remove the hex nut, flat washer and carriage bolt used A— WARNING —&A: to secure the Cabaret display chassis to a metal
Shock Hazard bracket.
- Open control panel (see Figure 3-2, The Contro/ Panel) . The following procedure should only be performed by a qualified service technician. Prior For the Cabaret cabinet, remove the upper disptay-
to removing or repairing the video display, unshield retainer.
plug the game. As an extra precaution, we 4, Remove the video display shield. ‘i : 2 5. Carefully remove the cardboard bezel. highly recommend you discharge the high voltage from the picture tube. 6 Remove the four sets of hardware that secure the dis- High voltages may exist in any video display, play chassis to the wood frame. even with power disconnected. Use extreme 7. Carefully pull the display out through the front of the
- Unplug the game. Unlock and open the table top and access panel (see Chapter 1, Section B).
- Reach through the access panel opening and unplug the three display harness connectors under the display. . ; Disconnect the ground wire. To Remove Video Display 3. Seven screws (four pan-head and three Phillips-head) and Upright and Cabaret Cabinets: three Lclamps hold the display assembly to the cabinet. 4, Unplug the game. Open the rear access panel. Unplug Remove the screws and the Lclamps. the three display harness connectors, and disconnect 4. Carefully lift the display assembly up and out of the the ground wire. cabinet. Service the display and reinstali in reverse order.
037443.03 i (Bezel) 037517-01 (Bezel) Disassembie in the order indicated. (Circled numbers match the numbered instructions.) Cj
037529-01 (Bracket)
92.049
- (video Display) 038274.01 (Shield) 038327-01 (Snie) — [C Figure 3-6 Video Display Upright and Cabaret Cabinets
va039275 vA038320 318 AU37756-03 ©
Dig Dug™ Maintenance, Repair and Parts
Disassemble in the order indicated. (Circled numbers match the numbered instructions.) 92-056
- video Display)
037792-01 (Bracket) 038090-01 (Clamp)
Figure 3-6 Video Display, continued Cocktail Cabinet
Parts List
Part No. Description
Upright Cabinet 92.049 *19-Inch Electrohome Color Raster-Scan Video Display 038274-01 Display Shield with Graphics 037443-03 Display Bezel
Cabaret Cabinet 92-049 *19-Inch Electrohome Color Raster-Scan Video Display 037515-01 Upper Display-Shield Retainer 037517-01 Display Bezel 037529-01 Display Bracket 038327-01 Display Shield with Graphics
Cocktail Cabinet A037756-03 14-Inch Color Video Display Assembly A038595-01 Display Harness Assembly 92-056 14-Inch Electrohome Color Raster-Scan Video Display, model GO7-910 037792-01 Display Mounting Bracket 038090-01 Clamp
*Acceptable substitute is Wells-Gardner part no. 92:055—use with TM-201 Acceptable substitute is Matsushita part no. 139003-1004 or -1204—use with TM-197 Acceptable substitute is Sanyo part no. 139003-1005 or -1205-—use with TM-205
3-19
Maintenance, Repair and Parts Dig Dug™
:
E. Coin Doors
170000-001 (Lamp) 479047.001 Ny (Lamp Base) LL
oo 99-15026 99-15056 (Coin inlet) (Screw for Bezeh \ > 99-15040 (Lever)
G 99-15025 —y ‘Coin inlet) os a4
IS) 89-15041 si PART OF
PS al (Lockout Ceil) ~ 9.15041 e a 99-15054 ao “4 “ (Pivot for Lever) I
B: { 99-15053 SS S (Lockt. Coil Spring) SJ
Qe — 99-15030
fe (Lockout Flap)
99-5027 {Coin Ret. Box)
75-9148 ~ al a (Hex Nut) SY {L . I— 99-15028 75056 a (Lock Wash.) e9-1s031 I (Sw. Adjuster) 99-15056 (Screw for Bezel) 99-15060
a (Sw. Cover)
(Bracket)
99-15042. (Switch)
(Screw)
7214148 (Screw)
Figure 3-7 Vertical-Mounted Coin Door
Upright and Cabaret Cabinets
3-20 403761991 they 20. 0
Dig Dug™
99-15073 ‘Upper Door) 99-15074 = (Lower Door)
99-15063 (Screw)
i)
99-15067 (Lock Assy.)
A037491-01 (Coin Box)
403754201 (Harness—not shown)
A037619-01 — U.S, 25¢/25¢ Coin Door ‘A037619-02 — U.S. 50¢/50€ Coin Door A037619-03 — Canadian 25¢/25¢ Coin Door A037519-04 — British 10 P/10 P Coin Door ‘A037619-05 — British 10 P/50 P Coin Door ‘A037619-06 — British 20 P/50 P Coin Door A037619-07 — Australian 20¢/20¢ Coin Door ‘403761908 — German 1 DM/1 DM Coin Door A037619-09 — German 2 DM/1 DM Coin Door A037619-10 — German 2 DM/5 DM Coin Door ‘A037619-11 — German 1 DM/5 DM Coin Door ‘A037619-12 — 5 Fr/S Fr Coin Door A037619-13 — Swiss 1 Fri1 Fr Coin Door A037619-14 — French 1 Fri1 Fr Coin Door om . \ 99-15052 _
(Spring for Button) Maintenance, Repair and Parts
99-15038 (Bezel for Button)
99-15001 thru 99-15011 (Ret, Button)
99-15072 (Frame)
99-15070 (Doors and Frame)
99-15065 (Clamp)
99-15039 (Bezel for Cover)
99-15036 (Cover)
99-15066 (Screw)
A037619-15 — French 2 Fri1 Fr Coin Door A037619-16 — Swedish 1 Kr/1 Kr Coin Door ‘A037619-17 — Spanish 25 Ptsi25 Pts Coin Door ‘A037619-18 — Italian 100 L/100 L Coin Door A037619-19 — Hong Kong $1/S1 Coin Door A037619-20 — Japanese 100Y/100Y Coin Door
Figure 3-7 Vertical-Mounted Coin Door, continued Upright and Cabaret Cabinets
3-21
Maintenance, Repair and Parts Dig Dug™
Figure 3-7 Vertical-Mounted Coin Door, continued Upright and Cabaret Cabinets Parts List
Part No. Description A037491-01 Coin Box (Not included in assembly) A037542-01 Harness Assembly 7214148 #4-40 x }-Inch Cross-Recessed Pan-Head Steel Machine Screw 75-056 #6 Internal-Tooth Zinc-Plated Steel Lock Washer 75-914S #4-40 Steel Machine Hex Nut 75-3414S #4-40 x 7,-Inch 82° Cross-Recessed Flat-Head Steel Machine Screw 99-15001 Coin Return Button with US. 25¢ Price Plate 99-15002 Coin Return Button with U.S. $1 Price Plate 99-15003 Coin Return Button with German 1 DM Price Plate 99-15004 Coin Return Button with German 2 DM Price Plate 99-15005 Coin Return Button with German 5 DM Price Plate 99-15006 Coin Return Button with Belgian 5 Fr Price Plate 99-15007 Coin Return Button with French 1 Fr Price Plate 99-15008 Coin Return Button with Japanese 100 Yen Price Plate 99-15009 Coin Return Button with British 10 Pence Price Plate 99-15010 Coin Return Button with Australian 20¢ Price Plate 99-15011 Coin Return Button with Italian 100 Lire Price Plate 99-15023 Base Plate 99-15025 Left Half of Coin Inlet 99-15026 Right Halt of Coin Inlet 99-15027 Side Plate of Coin Return Box 99-15028 Base Plate of Coin Return Box 99-15029 Switch Bracket 99-15030 Flap for Lockout Coil (U.S. 25%) 99-15031 Switch Adjuster 99-15036 Metal Coin Return Cover 99-15038 Bezel for Coin Return Button 99-15039 Metal Bezel for Coin Return Cover 99-15040 Coin Return Lever 99-15042 Coin Switch for U.S. 25¢ 99-15052 Spring for Coin Return Button 99-15054 Pivot for Coin Return Lever 99-15055 Retaining Screw 99-15056 #4-40 x %,-Inch Cross-Recessed Pan-Head Steel Machine Screw 99-15060 Switch Cover 99-15063 Screw for Hinge 99-15066 Screw for Clamp 99-15067 Lock Assembly 99-15068 Lockout Coil 99-15069 Spring for Lockout Coil 99-15070 Doors and Frame 99-15071 Clamp for Frame 99-15072 Door Frame 99-15073 Upper Door 99-15074 Lower Door 170000-001 6.3V Miniature Wedge-Base Incandescent Lamp 171006-035 Metal Coin Mechanism 179047-001 Lamp Base
3-22
Maintenance, Repair and Parts Dig Dug™
99-15038 oer at puter) _ p>, (Bezel for Button)
99-15022 (Face Plate)
179000-001 (Lamp)
179047-001 (Lamp Base)
99-15026 99-15056 (Coin Inlet) (Screw for Bezel}
99-15025 —», dt ; is 18% OG 99-15039 (Coin inlet) Z | ~ a \ (Bezel for Cover) PART OF 99-15036 99-15041 (Cover)
badge 99-15041 (Retng. Screw)” {Lockout Coil) “ 98-15053,
(Lockt. Coil Spring) << 99-15054 99-15027 (Pivot for Lever) (Coin Ret Box) 9915023 @ . (Base Plate) eee
(Sw. Adjuster) 99-15056 (Screw for Bezel) 99-15060 99-15029 (Bracket) _ (Sw. Cover)
(Switch) A036597-01 (Harness—not shown fo¥ clarity)
Figure 3-8 Double Coin Acceptor/Mount Assembly Cocktail Cabinet
A096093-01 thru 20. € 3-23
Maintenance, Repair and Parts
Cocktail Cabinet Parts List Dig Dug™
Figure 3-8 Double Coin Acceptori/Mount Assembly, continued
Part No. Description A036597-01 Double Coin Acceptor Harness Assy. 99-15001 Coin Return Button with U.S. 25¢ Price Plate 99-15002 Coin Return Button with U.S. $1 Price Plate 99-15003 Coin Return Button with German 1 DM Price Plate 99-15004 Coin Return Button with German 2 DM Price Plate 99-15005 Coin Return Button with German 5 DM Price Plate 99-15006 Coin Return Button with Belgian 5 Fr Price Plate 99-15007 Coin Return Button with French 1 Fr Price Plate 99-15008 Coin Return Button with Japanese 100 Yen Price Plate 99-15009 Coin Return Button with British 10 Pence Price Plate 99-15010 Coin Return Button with Australian 20¢ Price Plate 99-15011 Coin Return Button with Italian 100 Lire Price Plate 99-15013 Coin Return Button with British 20 Pence Price Plate 99-15014 Coin Return Button with British 50 Pence Price Plate 99-15015 Coin Return Button with French 2 Franc Price Plate 99-15016 Coin Return Button with Swiss 1 Franc Price Plate 99-15017 Coin Return Button with Hong Kong $1 Price Plate 99-15022 Dual-Entry Face Plate 99-15023 Single-Entry Base Plate 99-15025 Lett Half of Coin Inlet 99-15026 Right Half of Coin Inlet 99-15027 Side Plate of Coin Return Box 99-15028 Base Plate of Cain Return Box 99-15029 Switch Bracket 99-15030 Flap for Lockout Coil (U.S. 25¢) 99-15031 Switch Adjuster 99-15036, Coin Return Cover 99-15038 Bezel for Coin Return Button 99-15039 Bezel for Coin Return Cover 99-15040 Coin Return Lever 99-15041 Lockout Coil 99-15042 Coin Switch for U.S. 25¢ 99-15052 Spring for Coin Return Button 99-15053 Spring for Lockout Coil 99-15054 Pivot for Coin Return Lever 99-15055, Retaining Screw 99-15056 Screw for Both Bezels 99-15060 Switch Cover 170000-001 6.3V Miniature Wedge Base Incandescent Lamp 179047-001 Lamp Base
A036693-01 — U.S, 25¢/25¢ Coin Door A036693-02 — U.S. 50¢/50¢ Coin Door A036633-03 — British 10 P/10 P Coin Door A036693-04 — British 10 P/50 P Coin Door A036693-05 — British 20 P/50 P Coin Door A036693-06 — German 1 DM/1 DM Coin Door A036693-07 — German 2 DM!1 DM Coin Door
3-24 A036693-08 — German 2 DM/S DM Coin Door ‘A036693-09 — German 1 DMS DM Coin Door A036693-11 French 1 Frit Fr Coin Door A038693-12 — French 2 Frit Fr Coin Door A036693-13 — Swedish 1 Krit Kr Coin Door A036693-14 — Hong Kong $1/$1 Coin Door A036693-15 — Canadian 25¢/25¢ Coin Door A036693-16 — Spanish 25 Pts/25 Pts Coin Door A038693-17 — Swiss 1 Frit Fr Coin Door A036693-18 — Italian 100 L/100 L Coin Door 03669319 — Japanese 100Y/100Y Coin Door A036693-20 — Australian 20¢/20¢ Coin Door
Dig Oug™
F. Printed-Circuit Boards
Before removing or repairing any printedcircuit board, unplug the game. Let the RegulatorfAudio II PCB heat sink cool down for at least 10 minutes.
To Remove Printed-Circuit Boards:
1.
2. Open the rear access panel on the Upright and Cabaret cabinets. Open the table top on the Cocktail cabinet. Locate the hardware that secures the PCB to the cabinet. Remove and save this hardware. (The Cocktail cabinet Regulator/Audio li PCB has no securing hardware.) . If you are removing the game board, first remove the tie wraps that fasten the edge connector to that board. Then unplug the edge connector. If you are removing Maintenance, Repair and Parts
the Reguiator/Audio {I PCB, disconnect the three small harness connectors on this board.
- Carefully slide the PCB straight out of its retainers. (For the Upright cabinet, slide and lift the Regulator/Audio II PCB out of its slot.) Be careful not to twist the boards, as this may loosen connections or components. Repair as required.
To Replace Printed-Circuit Boards: © Reinstall the PCB, making sure that the connectors are properly plugged in. Note that they are keyed to fit only one way, So if they don’t slip on easily, don’t force them. A reversed connector will probably damage your game and void the warranty. @ Replace the hardware that secures the PCB to the cabinet wall. Close and lock the rear access pane! or table top. @ Check that the operation of the game is correct by performing the self-test. This is very important when you repair a PCB. Unless you are a qualified technician, do not turn the small knob on the Regulator/Audio Ii PCB.
G) REGULATOR’ AUDIO II PCB
- GAMEPCB
REGULATOR! AUDIO Il PCB
Figure 3-9 Printed-Circuit Board Removal
3-25
3-26 A038575-21 B Figure 3-10 Dig Dug™ Game PCB Assembly NOTICE TO_ALL PERSONS RECEIVING THIS DRAWING
inless by written agreement n permission from the corporation
n permission from the corporation.
B wont
Tez) eae ce
lees cr
IS
=103, LSie! fg
cue ToNa eee] i TSier] amy (OW
1520 | 1a7a]
Ao 1s Sora znoca tere ss2] Ccustow o7
T6007 ai COSTOM ar] (BBCOT 20)
aie a7] BS
ier | uu] BS
a Tete] Coston 15B057
- He
cay a ee Sw Bo oeERH
SS. % fas fo] 8 as aBeasoH sasecou Seed 2 3 wae oD tb? Tae 4500] 1s275 ]
as ts Teo) 5 ar 0 ee) S207]
an
oe rer LSse7) TEE0OT “107
a sh Sougyon ‘06 Leas | rs274 | Lozas | BR Fe
ves tee] Sera]
zg ie |
custom
rezas 1585] 15298]
Reoseae)
& Gea 18S ie 1 8B rer) & SRERERE ara
" 10 9 6 5 4 Maintenance, Repair and Parts Dig Dug™
Dig Dug™ Maintenance, Repair and Parts
Figure 3-10 Dig Dug” Game PCB Assembly, continued Parts List
Part No. Description (Reference Designations and Locations in Bold) A038575-21 Dig Dug Game PCB Assembly
| 24-250106 | 10 uF 25V Aiurninum Electrolytic Fixed Axial-Lead Capacitor | (C8, 9) |
| 24-250107 | 100 pF 25V Aluminum Electrolytic Fixed Axial-Lead Capacitor | (C1) |
| 24-500476 | 47 uF 50V Aluminum Electrolytic Fixed Axial-Lead Capacitor | (C3, 4, 71, 77) |
29-088 0.1 uF 50V Ceramic-Disc Axial-Lead Capacitor (C2, 5, 10, 29-70, 75)
| 31-1N4002 | Type-1N4002 100V Switching Diode | (CR2, 6, 7) |
| 31-1N914 | Type-1N914 75V Switching Diode | (CRA, 5) |
34-2N3904 Type-2N3904 NPN 60V 1W Transistor (Q1, 2) 34-2N6044, Type-2N6044 Darlington NPN Transistor (Q3-5) 37-4066 Type-4066 Quad Analog Switch Integrated Circuit (12F)
| 37-7406 | Type-7406 Integrated Circuit | (11K) |
| 37-74LS00 | Type-74LS00 integrated Circuit | (6H) |
| 37-74LS08 | Type-74LS08 Integrated Circuit | (6K) |
| 37-74LS20 | Type-74LS20 integrated Circuit | (7C, 8K) |
| 37-74LS32 | Type-74L$32 Integrated Circuit | (7D, 1, 1L) |
| 37-74LS74 | Type-74LS74 Integrated Circuit | (4B, 6C) |
| 37-74LS86 | Type-74LS86 Integrated Circuit | (6F, 7H, 6J, 5P) |
| 37-74LS139 | Type-74LS$139 Integrated Circuit | (1D, 6D, 1F, 1M) |
| 37-74LS157 | Type-74LS157 Integrated Circuit | (6A, 10C, 5E, 6E) |
| 37-74LS161 | Type-74LS161 Integrated Circuit | (8A, 9A, 7B, 8B) |
| 37-74LS 166 | ‘Type-74LS166 Integrated Circuit | (Su) |
| 37-74LS174 | Type-74L$174 Integrated Circuit | (12A, 5N, 8H) |
| 37-74LS175 | Type-74LS175 Integrated Circuit | (9J) |
| 37-74LS241 | Type-74LS241 integrated Circuit | (4M) |
| 37-74LS244 | Type-74LS$244 Integrated Circuit | (10K) |
| 37-74LS245 | Type-74LS245 integrated Circuit | (7E, 4L, 6L, 8P) |
| 37-74LS259 | Type-74LS259 Integrated Circuit | (5R, 8R) |
| 37-74LS273 | Type-74LS273 Integrated Circuit | (120, 4H, 5H, 5L) |
| 37-74LS367 | Type-74LS367 Integrated Circuit | (3D, 3E, 3H, 3J, 3K, 3L) |
| 37-74LS374 | Type-74LS374 Integrated Circuit | (10d) |
| 37-74LS377 | Type-74L8377 Integrated Circuit | (7F) |
| 37-74LS$393 | Type-74LS393 Integrated Circuit | (3R) |
| 37-74804 | Type-74S04 Integrated Circuit | (3B) |
| 37-LM324 | Type-LM324 Integrated Circuit | (11H) |
| 38-MV5053 | Type-MV5053 Light-Emitting Diode | (CR1) |
66-118P1T 8-Station Single-Throw, Dual-Inline-Package Switch (9N, 9P)
72-6810S #8 x %-Inch Cross-Recessed Pan-Head Screw (for mounting PCB to cabinet wall) 78-24012 5-Inch Beaded Nylon Tie Wrap
| 79-42C22 | 22-Contact Medium-Insertion-Force integrated Circuit Socket | (10H) |
| 79-42C24 | 24-Contact Medium-insertion-Force Integrated Circuit Socket | (2A, 5A, 5B, 2B/C, 5C, 2C/D, 5D, |
2E, 4F, 4J, 4K, 5K, 2K/L, 2N, 2P)
| 79-42C28 | 28-Contact Medium-Insertion-Force Integrated Circuit Socket | (10B, 4C, 4D, 2F, 5F, 2H, 2L/M, |
10L/M, 6N)
| 79-42C40 | 40-Contact Medium-insertion-Force Integrated Circuit Socket | (1B/C, 1J, 1N/P) |
79-42C42 42-Contact Medium-Insertion-Force Integrated Circuit Socket (10P, 11P) 81-4302 Nylon Snap-In Fastener {Continued on next page]
3-27
Maintenance, Repair and Parts Dig Dug™
Figure 3-10 Dig Dug™ Game PCB Assembly, continued Parts List
Part No. Description (Reference Designations and Locations in Bold) 90-7005 Random-Access Memory (11C, 12C) 90-7036 Random-Access Memory (7K, 7L, 7M, 7N, 7P, 7R) 110000-101 100 Ohm, +5%, %4W Resistor (R17, 87) 110000-102 1K Ohm, +5%, %W Resistor (R1, 2, 7, 8, 14-16, 18-21, 26-37, 39, 42-47, 49-52, 55-65, 74-77, 82, 85, 86, 88-103, 105, 116-131, 148-157, 160-172, 176-178, 181-185) 110000-103 10K Ohm, +5%, 14W Resistor (R12, 13, 53, 54, 66-73, 111, 179, 180) 110000-104 100K Ohm, +5%, ‘4W Resistor (R108, 113-115) 110000-151 150 Ohm, +5%, 14W Resistor (R3) 110000-221 220 Ohm, +5%, YW Resistor (R78, 80, 83, 158, 159, 175) 110000-222 2.2K Ohm, +5%, YaW Resistor (R106, 132-147) 110000-223 22K Ohm, +5%, YaW Resistor (R110) 110000-331 330 Ohm, +5%, ¥%4W Resistor (R9, 10) 110000-333 33K Ohm, +5%, %4W Resistor (R112) 110000-471 470 Ohm, +5%, %4W Resistor (R79, 81, 84, 104) 110000-472 4.7K Ohm, +5%, %4W Resistor (R22-25, 107) 110000-473 47K Ohm, +5%, V4W Resistor (R109) 110001 -152 1.5K Ohm, +5%, %W Resistor (R4) 122005-103 0.01 uF, + 10%, 25V Minimum Ceramic-Disc Axial-Lead Capacitor (C12-28) 122008-224 0.22 uF 25V Minimum Ceramic-Disc Axial-Lead Capacitor (C11) 128002-101 100 pF 100V Epoxy-Dipped Radial-Lead Mica Capacitor (C6) 128002-330 33 pF 100V Epoxy-Dipped Radial-Lead Mica Capacitor (C7, 74) 131003-001 Type-7N5257B 6.2V 1W Zener Diode (CR3) 136007-101 Programmable Read-Only Memory, ROMO (2C/D) 136007-102 Programmable Read-Only Memory, ROM1 (2E) 136007-103 Programmable Read-Only Memory, ROM2 = (2B/C) 136007-104 Programmable Read-Only Memory, ROM3 (2A) 136007-105 Programmable Read-Only Memory, ROM4 (2P) 136007-106 Programmable Read-Only Memory, ROMS (2N) 136007-107 Programmable Read-Only Memory, ROM6 (2K/L) 136007-108 Programmable Read-Only Memory (5K) 136007-109 Programmable Read-Only Memory (10A) 136007-110 Programmable Read-Only Memory (11A)} 136007-111 Programmable Read-Only Memory (8F) 136007-112 Programmable Read-Only Memory (4N) 136007-113 Programmable Read-Only Memory (8L) 136007-114 Programmable Read-Only Memory (4J) 136007-115 Programmable Read-Only Memory (4F) 136007-116 Programmable Read-Only Memory (5D) 136007-117 Programmable Read-Only Memory (5C) 136007-118 Programmable Read-Only Memory (5A) 136007-119 Programmable Read-Only Memory (5B) 137161-001 Electrically Alterable Read-Only Memory (10H) 137168-001 Type-74LS368 Integrated Circuit (4) 137169-001 Type-74LS107 Integrated Circuit (8A, 3P) 137177-001 Type-74LS138 Integrated Circuit (8E, 9E, 9F) [Continued on next page]
3-28
Dig Dug™ Maintenance, Repair and Parts
Figure 3-10 Dig Dug™ Game PCB Assembly, continued Parts List
Part No. Description (Reference Designations and Locations in Bold) 137186-001 Multi-CPU Bus Controller Custom Chip 08 (2F, 2H, 2L/M)
| 137187-001 | Coin and I/O Controller Custom Chip 51 | (11P) |
137188-601 Steering Controller Custom Chip 53 (10P)
| 137189-001 | Video Ram Addresser Custom Chip 00 | (4D) |
137190-001 Universal Shift Register Custom Chip 02 (5F) 137191-001 Motion Object Controller Custom Chip 04 (6N)
| 137192-001 | Controller Custom Chip 06 | (10L/M) |
| 137193-001 | Sync Generator Custom Chip 07 | (10B, 4C) |
| 137194-001 | 4.0 MHz Z80A Central Processing Unit | (1B/C, 1J, 1N/P) |
| 137199-001 | Random-Access Memory | (7A, 9B) |
| 137200-001 | Type-74LS365 Integrated Circuit | (8C, 9C) |
| 137201-001 | Type-74LS298 Integrated Circuit | (8D, 5M, 4P) |
| 137202-001 | Type-74128 Integrated Circuit | (2R) |
| 137203-001 | Type-74LS158 Integrated Circuit | (11B) |
| 137204-001 | Type-74LS283 Integrated Circuit | (6B, 12B, 6P) |
| 137209-001 | Type-74S174 Integrated Circuit | (8M) |
| 137211-001 | Static Random-Access Memory | (4K) |
| 137217-001 | Type-74S257 Integrated Circuit | (6M) |
144000-002 18.432 MHz Crystal (Y1) 175004-706 #6 Spacer for Mounting Printed Circuit Board 179051-002 Test Point Acceptable substitute is part no. 020670-01
3-29
Maintenance, Repair and Parts Dig Dug™
NOTICE TO ALL PERSONS RECEIVING THIS DRAWING CONFIDENTIAL: Reproduction’ forbidden without the Specific written: permission of Atari, Inc., Sunnyvale, CA. This drawing is only conditionally issued, and neither receipt nor possession thereot confers or transfers any right in, or license to Use, the subject matter of the draw: ing or any design or technical information shown thereon, ‘nor any right to reproduce this drawing or any part thereof, Except for manufacture by vendors of Alan, Inc., and for manufacture under the corporation's written license, no right to reproduce this crawing is granted or the sub: Ject matter thereof unless by written agreement with or written permission from the corporation.
oO a8 Rea i. Tw oO qj
Tip 32 TOAZ002ZA TDA2Z002A a7 Basa2 inscoz Qs nT cre op I ;
R3 0 =a
omy ey
- te 4 Ome + U0 220 ae R30 3 7aw OD cr, oPiscoz = Jj 0 “ Be 3360 F 6 —+ aa -— [3 [3] 35V
Figure 3-11. Regulator/Audio Il PCB Assembly
3-30 8995435-01 F
Dig Dug™ Maintenance, Repair and Parts
Figure 3-11. Regulator/Audio || PCB Assembly Parts List
Part No. Description (Reference Designations and Locations in Bold)
| A035435-01 | Regulator/Audio !I PCB Assembly | Acceptable substitute is part no. A035435-02 thru -04. |
49-100P1015 0.1 Ohm, +3%, 7W Wirewound Resistor (R24) 19-315102 1K Ohm Vertical PCB-Mounting Cermet Trimpot (R8) Acceptable substitute is part no. 119002-102.
| 24-250108 | 1000 pF 25V Aluminum Electrolytic Fixed Axial-Lead Capacitor | (C13) |
| 24-250477 | 470 uF 25V Aluminum Electrolytic Fixed Axial-Lead Capacitor | (C1, 4, 12) |
| 24-350338 | 3300 uF 35V Aluminum Electrolytic Fixed AxialLead Capacitor | (C9, 10) |
29-088 0.1 uF 50V Ceramic-Disc Axial-Lead Capacitor (C3, 11) 31-1N4002 Type-1N4002 100V 1-Amp. Silicon Rectifier Diode (CRI, 4)
| 33-TIP32 | Type-TIP32 PNP Power Transistor | (Q2) |
34-2N3055 Type-2N3055 NPN Silicon Transistor (Q3) 37-LM305 5V Linear Voltage Regulator (Q1) 72-1608C #6-32 x ¥2-Inch Cross-Recessed Pan-Head Corrosion-Resistant Stee| Machine Screw 72-6606S #6 x ¥-Inch Pan-Head Thread-Forming Cross-Recessed Type-AB Zinc-Plated-Steel Screw 75-99516 #6-32 Nut/Washer Assembly 75-F60405 #6-32 x 4-Inch Binder-Head Nylon Screw
| 78-16008 | Thermally Conductive Gompound | (Q3) |
78-16014 Thermally Conductive Silicon Insulator (Q2)
| 79-8306 | 6-Position Connector Receptacle | (J6) |
| 79-58308 | 9-Pasition Connector Receptacle | (J7) |
| 79-58354 | 4-Position Connector Receptacle | (J8) |
034531-01 Heat Sink
| 100015-103 | 0.01 pF 25V Minimum Ceramic-Dise Axial-Lead Capacitor | (C5, C14) |
| 110000-010 | 1 Ohm, +5%, %W Resistor | (R10, 19) |
| 110000-100 | 10 Ohm, #5%, %4W Resistor | (R11, 20, 29, 30) |
| 110000-101 | 100 Ohm, +5%, ¥%4W Resistor | (R4, 12, 22) |
| 110000-102 | 1K Onm, +5%, %4W Resistor | (R27, 28) |
| 110000-103 | 10K Ohm, +5%, %W Resistor | (R13, 14) |
| 110000-271 | 270 Ohm, +5%, ¥aW Resisior | (R1) |
| 110000-330 | 33 Ohm, +5%, %W Resistor | (R3) |
110000-392 3.9K Ohm, +5%, %4W Resistor (R6)
| 110000-562 | 5.6K Ohm, +5%, v4W Resistor | (R32, 33) |
110000-752 7.5K Ohm, +5%, ‘4W Resistor (R7)
| 110001-221 | 220 Ohm, +5%, v2W Resistor | (R9, 21) |
| 110009-027 | 2.7 Ohm, +5%, 1W Resistor | (R5) |
| 122002-102 | 0.001 wF 50V Minimum Ceramic-Disc Axial-Lead Capacitor | (C2, 7, 16) |
| 122004-224 | 0.22 uF 25V Minimum Ceramic-Disc Axial-Lead Capacitor | (C6, 8, 15, 17) |
137151-002 Type-TDA2002A 8W Linear Audio Amplifier (Q5, 7) 179051-001 Tesi Point Acceptable substitute is part no. 020670-01.
Maintenance, Repair and Parts Dig Dug™
G. Power Supply Assembly
Fuse cover must be in place during game operation. (Transformer) E
A035888-03 (Shid. Tnstmry Cl
A021084-xx (Volt. Plugs)
034544-01 (Fuse Block Cvr.)
79-4411001 (Fuse Post) 78-70501SC (Cap. Bracket) 48-2017002 (Fuse)
A035891-01 (Fuse Harness) 03448202 (Chassis)
46-301203 (Fuse)
037639-01 (Label)
78-2708 (Bushing)
A034630-01 79-3206 (Filter Assy.) (Fuse Block) 037641-01 (Label)
79-15021001 (Term. Block) (Pwr, Harness)
A034629-01 tanto (AC. Harn.) (Rectifier
Figure 3-12 Power Supply Assembly
Aga7erixx 3-32 AOBTET2«x A
Dig Oug™ Maintenance, Repair and Parts
Figure 3-12 Power Supply Assembly, continued Parts List
Part No. Description (Reference Designations in Bold)
| A021084-01 | Voltage Plug for 100V | (violet) |
| A021084-02 | Voltage Plug for 120V | (yelfow) |
| A021084-04 | Voltage Plug for 220V | (blue) |
| A021084-05 | Voltage Plug for 240V | (brown) |
A034629-01 AC. Harness Assembly
| A034630-01 | RFI Filter Assembly | _(FL1) |
A035888-01 Upright and Cabaret Transformer Assembly (11) Acceptabie substitute is part no, A035888-02 A035888-03 Cocktail Shielded Transformer Assembly (T1) Acceptable substitute is part no. A035888-04 A035890-01 Power Harness Assembly A035891-01 Fuse Harness Assembly A037671-xx* Upright and Cabaret Power Supply Assembly A037672-xx** Cocktail Power Supply Assembly
29-053 27,000 pF 15V DC Electrolytic Capacitor (C1) 3A-MDA3501 Bridge Rectifier, Type MDA 3501 (CR1) 46-2014002 4-Amp. 250V 3AG Slow-Biow Glass Cartridge-Type Fuse (F2, F4-F6) 46-2017002 7-Amp. 250V 3AG Slow-Blow Glass Cartridge-Type Fuse (F1)
46-301203 20-Amp. 32V 3AG Slow-Blow Glass Cartridge-Type Fuse (F3) 78-2708 Nylon Type 6/6 Hole Bushing with %-Inch Inside Diameter x %%,-Inch Outside Diameter x Ya-lnch Thick 78-70501SC 2-Inch Diameter Capacitor Mounting Bracket 79-15021001 2-Circuit Single-Row Terminal Block 79-3206 5-Position 3AG Fuse Block with %-Inch Quick-Disconnect Terminals 79-4411001 Panel-Mounting Non-Indicating 3AG Cartridge-Type Fuse Post 034482-02 Power Supply Chassis 034544-01 Fuse Block Cover 037243-01 Metal Base Plate (goes under the power supply—not shown in illustration)
| 037639-01 | Label for Fuse Value | (F1) |
| 037641-01 | Label for Fuse Values | (F2-F6) |
*A037671-01 power suppiy assembly has the 120V plug A037671-02 has the 100V, 220V and 240V plugs A037671-03 has the 220V and 240V plugs
** A037672-01 power Supply assembly has the 120V plug A037672-02 has the 100V, 220V and 240V plugs A037672-03 has the 220V and 240V plugs
Line Voltage Range 90-110 VAC (100) 105-135 VAC (120) 200-240 VAC (220) 220-260 VAC (240) Voltage Selection Plug Wire Color Violet Yellow Blue Brown
NOTES:
NOTES:
NOTES:
NOTES:
NOTES:
Dig Dug
YOUR COMMENTS, PLEASE! 4tn printing
Your comments will assist Atari in improving the usefulness of our publications. They are an important part of preparing for revisions of game manuals. No postage stamp is necessary if mailed in the U.S.A.
If you have any technical questions about certain ATARI games products, or are requesting additional publications, we will immediately forward your note to the appropriate person.
Page: Comments:
Fill in if you wish a reply:
Name.
Firm U Distributor
Address _. © Operator City State Zip 5 Other.
Area Code __ Phone
First fold
No Postage Necessary 4 mailed in the United States
LC
BUSINESS REPLY MAIL a
FIRST CLASS PERMIT NO. 1004 SUNNYVALE. CA ee ; POSTAGE WILL BE PAID BY ADDRESSEE | Atari, Inc. ee | Attn.: Field Service/Coin-Op Division P. O. Box 427 a Sunnyvale, California 94086 _ a Pe
- ~~ Second told — —|
abpe si) adey word |
Warranty
Seller warrants that its printed-circuit boards and parts thereon are free from defects in material and workmanship under normal use and service for a period of ninety (90) days from date of shipment. Seller warrants that its video displays (in games supplied with displays) are free from defects in material and workmanship under normal use and service for a period of thirty (30) days from date of shipment. None of the Seller's other products or parts thereof are warranted.
If the products described in this manual fail to conform ta this warranty, Sellers’ sole liability shall be, at its option, to repair, replace, or credit Buyer's account for such products which are returned to Seller during said warranty period, provided:
- Seller is promptly notified in writing upon discovery by Buyer that said products are defective;
- Such products are returned prepaid to Sellers’ plant; and
- Seller's examination of said products discloses to Seller's satisfaction that such alleged defects existed and were not caused by accident, misuse, neglect, alteration, improper repair, installation or improper testing. In no event shall Seller be tiable for loss of profits, loss of use, incidental or consequential damages. .
Except for any express warranty set forth in a written contract between Seller and Buyer which contract supersedes the terms of this order, this warranty is expressed in lieu of all other warranties expressed or implied, including the implied warranties of merchantability and fitness for a particular purpose, and of all other obligations or liabilities on the Seller's part, and it neither assumes nor authorizes any other person to assume for the Seller any other liabilities in connection with the sale of products under this order.
The use of any non-Atari parts may void your warranty, according to the terms of the warranty. The use of any non-Atari parts may also adversely affect the safety of your game and cause injury to yourself and others. Be very cautious in using non-Atari-supplied components with our games, in order to insure your safety.
Atari distributors are independent, being privately owned and operated. In their judgment they may sell parts or accessories other than Atari parts or accessories. Atari cannot be responsible for the quality, suitability or safety of any non-Atari part or any modification including labor which is performed by such distributor
This document is and contains confidential trade secret information of Atari, Inc.
This document is loaned under confidential custody for the sole purpose of operation, maintenance or repair of Atari equipment and may not be used by or disclosed to any person for any other purpose whatever, and remains the property of Atari, Inc.
Neither it nor the information it contains may be reproduced, used, or disclosed to persons not having a need to know consistent with the purpose of the loan, without written consent of Atari, Inc.
: “ATARI . = : = = = "790 SYCAMORE DRIVE © a! aS: P.O. BOX 906 s =
- MILPITAS, CALIFORNIA 95085 " = ® 108/942-3100 © TELEX 35-7488,