CATHODE RAY TOMES

Capcom vs SNK

Capcom Vs. SNK: Millennium Fight 2000 (Rev C) (Capcom / SNK, 2000) · Manual · 18 pages · 19 sections · original scan

Page 1

MILLENNIUM FIGHT 2006,

@CAPCOMCO, LTD, 2000 ALL RIGHTS RESERVED. ©CAPCOMULSA INC. 2000 ALL RIGHTS RESERVED. ©SNK2000 [CAPCOM VS. SNK MILLENIUM FIGHT 2000] is manufactured and distributed by CAPCOM CO, Tbunethebaestomen fi Py : ‘SNK isa trademark of SNK Corporation.

OPERATORS MANUAL

WARNING

This game is for use in the United States of America and Canada. Sales, export or operation outside of these countries may be constructed as copyright and trademark infringements and is strictly prohibited. Violators are subject to severe penalties and will be prosecuted to the full extent of the law.

® Cvs1300

Page 2

® GAPCOM co-op, inc. CAPCOM VS. SNK

THANK YOU FOR PURCHASING CAPCOM VS. SNK™ WE INVITE YOU TO USE THE FOLLOWING MAILING ADDRESS, TELEPHONE OR FAX NUMBER FOR PARTS OR SERVICE INFORMATION CONCERNING THIS GAME:

CAPCOM® COIN-OP, INC. ATTN: CUSTOMER SERVICE 475 OAKMEAD PARKWAY SUNNYVALE, CA 94086 PHONE: (408) 522-5356 FAX: (408) 522-5331

THE SERIAL NUMBERS OF YOUR GAME ARE LOCATED ON THE PRINTED CIRCUIT BOARDS AS SHOWN BELOW. PLEASE HAVE THESE SERIAL NUMBERS AVAILABLE WHEN CONTACTING US FOR SERVICE INFORMATION.

AAMA SERIAL NUMBER

a eee el wel cl |) = ce © oy o||| =

NAOMI cass

fe) ° Ee D)

PLEASE RECORD THE AAMA SERIAL NUMBER HERE:

  • AAMA SERIAL NUMBER:

PLEASE APPLY PRODUCT SERIAL NUMBER STICKER HERE:

Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC.

Page 3

® CAPCOM co-op, inc. CAPCOM VS. SNK™

TABLE OF CONTENTS

Warranty Information ii

Safety Notices iii

Kit Inspection Kit Parts List PCB & Cables information PCB Handling information Nua

Kit Installation Preparation Installation Marquee Control Panel Overlay Cabinet Decals Control Panel Components Test Switch/Service Switch PC Boards APRAWWWWW

Wiring Control! Panel 4 Test Switch/Service Switch 4, 13 PC Boards 6

Game Adjustments NAOMI SYSTEM Test Mode Cautions on NAOMI SYSTEM Test Menu Game Test Mode Accessing the Menu How to Select an Item Menu Item Descriptions OOO0wonN

Selecting monitor type (31K or 15K) 10 NAOMI Converter setting (6 Button 2 Players/ 4 Button 4 Players) 10

Game Configuration 11 Game Configuration option 12 Sound Mode 12

Reference Information Table 1: JAMMA Connections 17 Table 2: Test Switch/Service Switch wiring chart 17 Table 3: Auxiliary Cable (P/N 03-0105) connections TZ

PCB Connector and Control location Inside of back cover Control Panel sample layout Inside of back cover

Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC. i

Page 4

® CANPECI" comn-or, inc. CAPCOM VS. SNK™

LIMITED PRODUCT WARRANTY (APPLIES TO DOMESTIC SALES ONLY)

CAPCOM® COIN-OP, INC. (Seller), warrants only to the initial purchaser of its products, that the items listed below are free from defects in material and workmanship under normal use and service for the warranty periods specified:

A. Printed Circuit Boards: Ninety (90) Days B. Electronic and Mechanical Components: Ninety (90) Days

No other part of Seller's products are warranted.

Warranty periods are effective from the initial date of shipment from seller to its authorized distributors.

Seller's sole liability shall be, at its option, to repair or replace products which are returned to Seller during the warranty periods specified, provided:

A. Seller is notified promptly upon discovery by buyer that stated products are defective;

B. Such products are properly packaged and then returned, prepaid to Seller's designated plant.

This warranty does not apply to any parts damaged during shipment or handling, or due to improper installation, usage or alteration. In no event shall Seller be liable for any anticipated profits, loss of profits, loss of use, incidental or consequential damages or any other losses incurred by the customer in connection with the purchase of a CAPCOM® COIN-OP, INC. product.

WARRANTY DISCLAIMER

EXCEPT AS SPECIFICALLY PROVIDED IN A WRITTEN CONTRACT BETWEEN SELLER AND PURCHASER, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

IMPORTANT NOTICE

THIS SHIPMENT HAS BEEN CAREFULLY INSPECTED AND PROPERLY PACKAGED BEFORE LEAVING THE FACTORY. WE CANNOT ASSUME RESPONSIBILITY FOR BREAKAGE THAT MAY OCCUR DURING TRANSPORTATION OF THE GAME. IF THIS GAME IS DAMAGED UPON RECEIPT FROM THE CARRIER, IMMEDIATELY NOTIFY THE CARRIER AND FILE A DAMAGE REPORT.

ii Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC.

Page 5

GAPGOM" coin-op, inc. CAPCOM VS. SNK™*

SAFETY NOTICES

The following safety instructions apply to all game operators and service personnel. There are specific warnings and cautions throughout this manual where they apply. Read this page before preparing your game for play.

CAUTION For your safety, please read and abide by the following instructions when handling the P.C. board. e Make sure the power is off before installing the board or changing the settings of the board. e Do not damage the wiring cables. e Donot disassemble the case. e Do not touch the board, connectors or the harness with wet hands.

Please keep the following instructions to keep the P.C. board in good condition. e Do not block the ventilation slots. Do not keep the board in extremely cold/hot places. Do not drop or bump the board. Do not spill any liquids on the case. Do not disassemble the case. Always keep the connectors clean. Do not disconnect the connectors, cables, or the harness while the power is on.

WARNING Plug the game into a properly grounded outlet to prevent shock hazards and assure proper game operation. Do not use a cheater plug to defeat the power cord's grounding pin. Do not cut off the ground pin.

EPILEPSY WARNING

A very small portion of the population has a condition which may cause them to experience epileptic seizures or have momentary loss of consciousness when viewing certain kinds of flashing lights or patterns that are present in our daily environment. These persons may experience seizures while watching some kinds of television pictures or playing certain video games. People who have not had any previous seizures may nonetheless have an undetected epileptic condition.

If you or anyone in your family has experienced symptoms linked to an epileptic condition (e.g., seizures or loss of awareness), immediately consult your physician before using any video games.

Parents should observe their children while they play video games. If you or your child experience the following symptoms: dizziness, altered vision, eye or muscle twitching, involuntary movements, loss of awareness, disorientation, or convulsions, DISCONTINUE USE IMMEDIATELY and consult your physician.

Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC. iii

Page 6

® CGNPEOM" coin-op, inc. CAPCOM VS. SNK™

KIT INSPECTION

CHECK THAT ALL OF THE FOLLOWING PARTS HAVE BEEN SHIPPED WITH YOUR KIT. IF ANY PARTS ARE MISSING, CONTACT YOUR DISTRIBUTOR IMMEDIATELY.

CVS1000 "CAPCOM VS. SNK 2 FULL KIT" PARTS LIST

PART NO.

CVS1400 DESCRIPTION

“CAPCOM VS. SNK" COMPLETE PCB

NAOMI-CONVERTER JVS TO JAMMA CONVERTER FOR NAOMI SYSTEM

CBL-VGA CABLE ASSY, D-SUB 15PIN, VGA/SVGA CABLE

CBL-USB CABLE ASSY, USB CABLE

CBL-AUDIO-ST CABLE ASSY, STEREO AUDIO CABLE

CBL-POWER-NAOMI CABLE ASSY, POWER CABLE 8PIN FOR NAOMI

CVvsi110 MARQUEE, “CAPCOM VS. SNK”

CVS1300 OPERATORS MANUAL, "CAPCOM VS. SNK"

NOM1300 SEGA NAOMI SERVICE MANUAL

CVS2510 BUTTON! JOYSTICK LABEL, GENERIC

CVS2520-01 PLAY INSTRUCTION - TOP, "CAPCOM VS. SNK"

CVS2520-02 PLAY INSTRUCTION - BOTTOM, "CAPCOM VS. SNK”

GE1200 MONITOR CARD

AW00147 DECAL, CABINET SIDE

AW00216 CONTROL PANEL OVERLAY

PL00376 MARQUEE PLEX, CLEAR, 27.0 X 9.0 X 1/8”

GE2030 JOYSTICK, 8 WAY

16-0130 SWITCH, 1-PLAYER START BUTTON (WHITE)

16-0131 SWITCH, 2-PLAYER START BUTTON (WHITE)

16-0133 SWITCH, BUTTON (RED)

16-0134 SWITCH, BUTTON (BLUE)

16-0136 SWITCH, BUTTON (GREEN)

16-0147 SWITCH, BUTTON (YELLOW) mlrmlrmlrm]|aloalrm/a)alrw)/aflaljalasyasyalalalajaljalala

Note: Because of availability, your kit may contain different color of push buttons.

1 Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC.

Page 7

CAPCOM comn-op, inc. CAPCOM VS. SNK™

PCB & Cables

"CAPCOM VS. SNK" COMPLETE PCB. NAOM! CONVERTER

o Vv 5]

segaeeses SERRBEEER a ooo Oo 8 = : a ||| © KR 1 ® SS e =i USB A-B Cable VGA/SVGA Video Extension Cabie f aor NAOMI) aan

{ol 3) \é yi JVS Power Cable faa a

Note 1: Please make sure your power supply supports 7A or more.
Note 2: Please make sure your power supply voltage is at +5V+5%.
CAUTION For your safety, please read and abide by the following instructions when handling the P.C. board. Make sure the power is off before installing the board or changing the settings of the board. Do not damage the wiring cables. Do not disassemble the case. Do not touch the board, connectors or the harness with wet hands.

Please keep the following instructions to keep the P.C. board in good condition. Do not block the ventilation slots. Do not keep the board in extremely cold/hot places. Do not drop or bump the board. Do not spill any liquids on the case. Do not disassemble the case. Always keep the connectors clean. Do not disconnect the connectors, cables, or the harness while the power is on.

WARNING Plug the game into a properly grounded outlet to prevent shock hazards and assure proper game operation. Do not use a cheater plug to defeat the power cord's grounding pin. Do not cut off the ground pin.

Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC. 2

Page 8

CAPQOM co-op, ino. CAPCOM VS. SNK™

KIT INSTALLATION 13.Peel off the backings of the 6-button and joystick decals, align over the control panel holes, and press in place on

A WARNING: the overlay (refer to the drill hole template for proper

placement). Using a knife, trim material from the center MAKE SURE ELECTRICAL POWER TO THE GAME IS hole of the joystick decal. OFF BEFORE STARTING THE KIT INSTALLATION.

PREPARATION

  • Disconnect and remove the old printed circuit board(s) from the cabinet.
  • Install the control panel cover, figure. 1. (If required).
  • Remove or open the control panel, and disconnect and remove the buttons and joystick(s) from the control panel.
  • Remove any covering from the control panel overlay, and then remove the control panel overlay.
  • Determine where any new holes should go. Center punch any needed new holes on the control panel. Overlay (Trim to size)
  • Cut out the new holes using a 1-3/16" hole saw.
  • If there is an additional Control Panel Cover, figure 1 (such as plastic or lexan) that will be utilized cut any additional holes using the same template. *Cover is not included in the kit.
  • Plug up unused holes with a wood dowel (1-1/8" diameter) and sand any rough edges. Figure 1: Overlay Installation

INSTALLATION

MARQUEE INSTALLATION CABINET DECAL INSTALLATION

15.Remove monitor glass and install monitor card

  • Remove the marquee plexi glass, marquee overlay, and the cabinet graphics. 16.Peel-off the backing to the instruction decals and place on both the top and bottom of the monitor card. (See
  • Install the new marquee and replace the plexi glass. Clear Figure 2). Also, apply the cabinet decals to both sides of plexi glass is included in “full” kit. the cabinet.

CONTROL PANEL OVERLAY INSTALLATION (See MARQUEE Figure 1) OVERLAY MONITOR 10.The control panel overlay in the kit is oversized to , CARD eee accommodate most control panel sizes. Center the INSTRUCTION

overlay on the control panel, leaving some excess DECAL - y Al

material at the edges. BOTTOM i cA

11.Remove the protective backing from the overlay and press it down on the control panel, keeping it properly aligned. Press it down firmly, smooth out any bubbles, and press it over the edges. | INSTRUCTION ) DECAL - TOP

  • Trim any excess from the overlay. Place the drill hole template on top of the overlay, aligning it with the joystick holes. Pierce through the overlay at each control panel hole. Then, cut away overlay material covering the joystick and button holes. Remove the template and clean Figure 2: Cabinet Decal Installation off the overlay.

3 Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC.

Page 9

® GAPEOH" coin-op, inc. ¥

CAPCOM VS. SNK™

RE-ASSEMBLY OF COMPONENTS

  • Notice that there are two white buttons. See figure 3. The WHITE buttons are START buttons. Install the one player button on the top left-hand side of the control panel, and the two players button on the top right-side of the control panel. 1 Player @ @ Le Bla

ia ia os Figure 3: Start Buttons

Control Panel Green Red Green Red

Yellow Blue Yellow Blue

Buttons aa | sa Figure 4: Control Panel Buttons and Switches Retaining Rings.

  • Install all buttons and retaining rings on the control panel as shown in Figure 4. Install two red buttons to the immediate right of each joystick, install two green buttons to the right of the red ones, and install two blue buttons to the right of the green ones.
  • Install the switches on the buttons as shown in figure 4. Orient the switches so that when a button is pressed, the plastic contact on the switch is depressed.
  • Install the joysticks on the control panel as shown in figure 5.

Figure 5: Joystick Installation CONTROL PANEL WIRING

NOTE: All switch wires used in this game must be wired to the N.O. (Normally-Open) connection on the switches. Each switch requires a ground wire on the COM. (Common) connector and the appropriate control or switch wire on the N.O. (Normally-Open) connector of the switch.
  • Reconnect the existing JAMMA connectors to the control panel according to the chart in table 1 on page 17.
  • Connect the player 1 and the player 2 kick buttons to the auxiliary cable harness as shown in figure 6. Make the connections according to the chart in table 2. To A-Canidge

To Conzol Pane! Bution Switches

To Vahume Test Switch Bracket Figure 6: Auxiliary Cable Harness

TEST SWITCH WIRING

  • Your cabinet may already equipped with test switch and service switch. When installing, the test switch and service switch, should be mounted inside the coin door and on top of the cash box for easy access. (See Table 3: for wiring detail)
NOTE: Test switch and service switch should be installed for this game to access NAOMI test menu system.

}) D Test SERVICE

GEOR

Figure 7: Test/Service switch mounting

Volume adjustments must be made through the volume control knob located on the NAOMI - CONVERTER PC- board.

  • Ifyou are converting a cabinet that is equipped with CAPCOM® Q-SOUND, you may use stereo audio output connect to existing Q-SOUND POWER AMPLIFIER. And set "SOUND MODE" to "Stereo". See "SYSTEM CONFIGURATION" for detail.

Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC. 4

Page 10

c) CAPCOM COIN-OP, INC. CAPCOM VS. SNK™

PC BOARD INSTALLATION

  • Install the PCB and the NAOMI-CONVERTER to the mounting shelf. e Wood Screws for NAOMI-CONVERTER are not included in the kit.

PARALLEL MOUNTING

TANDEM MOUNTING ‘TO POWER SUPPLY, CONTROL PANEL

COIN DOOR AND TEST SWITCHES

When using the small brackets

NAQM! converter Small brackets Serews \ Not included)

“oe base board PC BOARD MOUNTING TIPS

e Parallel Mounting

This mounting style is recommended for a regular style cabinet equipped with a horizontal mounting shelf.

@ Tandem Mounting.

This mounting style could be used for cabinets which have a vertical mounting shelf.

If you are mounting in tandem make sure you have enough room to access cables, connectors and switches.

© Stacked Mounting.

If your cabinet does not have enough room to mount two PC Boards in parallel or tandem position. This mounting style may be used to install the PC Boards.

Use large mounting brackets supplied in the kit to mount the NAOMI-CONVERTER over the top of the game PC Board.

We recommend mounting PC Boards in the horizontal position for easy access and stable operation.

MOUNTING THE NAOMI CONVERTER (NAOMI converter [NAOMI board lage brackets

\L Pos base board

5 Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC.

Page 11

® GAPGOM coin-op, inc. CAPCOM VS. SNK™

PC BOARD WIRING CONNECTIONS

/ ! \\_ WARNING

Improper installation of the connector harness (JAMMA / USB/VIDEO) to the PC board connector may cause damage to the PC board.

  • Attach Power, USB cable, Audio cable and Video cable to NAOMI Board.
  • Connect other end to NAOMI-COVERTER Board.
  • If you are installing the game equipped with High-Resolution monitor, connect the Video cable to the monitor.

A standard low-resolution video signal is supplied through the JAMMA connector on the NAOMI-CONVETER, if your cabinet is not equipped with a high-resolution monitor. The NAOMI_CONVERTER Board will not convert video signal frequency and signal level.

  • Connect the JAMMA harness connector to the edge connector on the NAOMI-CONVERTER Board.
  • If you elect to use Q_Sound Audio Amplifier or similar stereo amplifier board, connect audio cable to audio output on the NAOMI-CONVERTER Board.

Audio volume control is located on the NAOMI_CONVERTER Board.

Sound setting and output terminal (please refer to GAME CONFIGURATION to set the SOUND MODE)

SOUND MODE OUTPUT TERMINAL SOUND STEREO JAMMA HARNESS ONLY MONAURAL STEREO OUT STEREO MONAURAL JAMMA HARNESS ONLY MONAURAL STEREO OUT

@ WIRING DIAGRAM DC Cabie @CONNECTOR LOCATIONS rex: swicn + JAMMA CONNECTOR SIDE SE

+ NAOMI CONNECTOR SIDE

Top view Audio Cable

D-SUB Cable Connector side

Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC. 6

Page 12

CAPGOM*con-op, inc. CAPCOM VS. SNK™

NAOMI SYSTEM TEST MODE _

This test mode mainly allows the PC Board to be checked for accurate functioning, monitor color to be adjusted as well as COIN ASSIGNMENT AND GAME ASSIGNMENT to be adjusted.

For the details of "NAOMI SYSTEM MENU", please refer to "NAOMI SERVICE MANUAL”.

HOW TO ENTER THE TEST MODE

For the details of

"NAOMI SYSTEM MENU"

Move the arrow (Cursor) please refer to

"NAOMI SERVICE MANUAL". Enter to selected item

To enter the GAME TEST MODE, move the "— >" cursor to GAME TEST MODE in the NAOMI SYSTEM MENU and press the Test Button.

GAME TEST MODE

  • INPUT TEST SY STEYENSION GAME DATA —> RAMTEST GAME CONFIGURATION JVS TEST PASSWORD SOUND TEST SYSTEM ASSIGNMENTS SSIGNMENTS. EXIT

CLOCK SETTING ROM BOARD TEST GAME TEST MODE [CAPCOM VS. SNK USA] EXIT SELECT WITH SERVICE BUTTON PRESS TEST BUTTON SELECT = 1P UP or DOWN NAOMI SYSTEM MENU START =1P SHOT1

GAME TEST MODE

if. Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC.

Page 13

® GAPGOM"comn-op, ine. CAPCOM VS. SNK™

CAUTIONS ON NAOMI SYSTEM MENU

  • Please set the CABINET TYPE and the MONITOR TYPE of the SYSTEM ASSIGNMENTS menu to "2 PLAYER(S)" and "HORIZONTAL" respectively. This game will not function properly if above is not followed.
  • The following is the default settings of COIN ASSIGNMENTS.

COIN CHUTE TYPE COMMON COIN/CREDIT SETTING #1 COIN CHUTE #1 1 COINS 1 CREDIT COIN CHUTE #2 1 COINS 1 CREDIT

  • Please refer to the following for the SEQUENCE SETTING of the COIN ASSIGNMENTS. SEQUENCE 1: Credits required to start the game. SEQUENCE 2: Credits required to continue the game.
  • SEQUENCE 3~8 is not available in "CAPCOM VS. SNK".
  • Ex) Standard setting One(1) credit to start and continue the game.
SEQUENCE 11 CREDIT(S)€ Credits required to start the game.
SEQUENCE 21 CREDIT(S)€ Credits required to continue the game.
  • Ex) 2 credits start, 1 credit continue setting Players need 2 credits to start the game but only one credit to continue the game.
SEQUENCE 12 CREDIT(S)€ Credits required to start the game.
SEQUENCE 21 CREDIT(S)€ Credits required to continue the game.
  • BOOKKEEPING 2/2 indicates the following: P1(P2) SEQ 1: The number of times the game was started from Player 1 and Player 2 each. P1(P2) SEQ 2: The number of times the game was continued from Player 1 and Player 2 each.
  • SEQ 3-8 is not available in "CAPCOM VS. SNK".

Ex) The number of "Start" of 1P side. \ 4

P1 SEQ 1 82 P2 SEQ1 45 P1 SEQ 2 36 P2 SEQ 2 15

7 \ The number of "Continue" of 1P side. The number of "Continue" of 2P side. The number of "Start" of 2P side.

Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC. 8

Page 14

® CAPEBH co-op, inc. CAPCOM VS. SNK™

GAME TEST MODE

The test menu allows you to test input devices such as joysticks, buttons and coin-mechs. Through the test menu you can also access the game configuration menu, where you can change the settings of the game. The game data shows the earning-related data.

Your setting will be saved in the backup RAM. Do not tum off the power before you EXIT game test mode!

The NAOMI SYATEM MENU will appear when you EXIT GAME TEST MODE

GAME TEST MODE INPUT TEST @ CONTROLS IN GAME TEST MODE GAME DATA 2 Use the Joystick and the button As illustrated. GAME CONFIGURATION PASSWORD Select an tem Decide an tem EXIT bs

S seNot used

Select an item — SELECT = 1P UP or DOWN JENot used START =1P SHOT1

GAME TEST MODE

4, TEST MENU ITEM DESCRIPTIONS

INPUT TESTS THE "INPUT SIGNAL" OF THE LEVER AND THE BUTTONS. WHEN THE "INPUT SIGNAL" IS DETECTED, THE NUMBER CHANGES FROM "0" TO "1",

@ INSIDE INPUT TEST, YOU CAN TEST UP TO TWO SERVICE BUTTONS. IN CASE YOUR CABINET HAS ONLY ONE SERVICE BUTTON, PLEASE MAKE SURE IF THE 1P SERVICE, BUTTON FUNCTIONS PROPERLY.

(PLEASE NOTE HOWEVER, ON CERTAIN CABINETS, IT IS POSSIBLE THE NUMBER CHANGES TO "1" ON BOTH 1P AND 2P SIDE.)

GAME DATA SHOWS THE EARNING-RELATED DATA. PLEASE USE THE INFO TO DETERMINE THE BEST COIN SETTINGS FOR YOUR LOCATION. CONFIGURATION SETS THE GAME PLAY SETTINGS SUCH AS DIFFICULTY, NUMBER OF ROUNDS, TIMER, ETC. PASSWORD ENTER THE PASSWORD TO UNLOCK THE HIDDEN FEATURES IN THE GAME.

EXIT RETURNS TO NAOMI SYSTEM MENU

9 Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC.

Page 15

® CAP@ONT” co-op, inc. CAPCOM VS. SNK™

e 31K MONITOR CABINET The NAOMI board is capable of producing a screen resolution that is three times as high as the CP-SYSTEM I board.

To achieve the maximum performance, it is essential to install the board in a cabinet equipped with a 31K monitor that is capable of high resolution graphics. (Ex. "BLAST CITY" "MEGALO 410" etc. from Sega)

To enjoy NAOMI's graphics at their best, please use the cabinet with 31K monitor.

e EITHER 15K OR 31K HORIZONTAL MONITOR CAN BE USED. To change the frequency setting, set the DIP Switch as shown below.

Turn this switch "ON"

For

15K Monitor

ORS) tt DIP Switch [| =a

For

31K Monitor —"

Naomi converter slide switch setting for "CAPCOM VS. SNK" Please confirm that the switches are set in proper position as shown below.

1."C SYNC/HMV SYNC" switch is on right position.

2."4P 4SHOT / 2P 6SHOT" switch is on right position.

[View from JAMMA connector side] 4P 4SHOT/ 2P 6SHOT select switch

C SYNCIHIV SYNC select switch

cSYNC/ 4P 4SHOT/ HIV SYNC 2P 6SHOT,

Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC. 10

Page 16

® @APEOH co-op, inc. CAPCOM VS. SNK™

INPUT TEST GAME DATA

PASSWORD

EXIT GAME TEST MODE

SELECT = 1P UP or DOWN START = 1P SHOT1 SELECT OPTION = 1P UP or DOWN

GAME CONFIGURATION

-> SOUND MODE STEREO DEMO SOUND HALF OFF

CONTINUE, ON

DIFFICULTY EASY [*2**##%**]HARD

—> GAME CONFIGURATION DAMAGE LEVEL LOW [¥#2**]HIGH TIMER SPEED SLOW [*2*%] FAST

GAME SPEED FREE SELECT EVENT OFF JOIN-IN ON DEFAULT SAVE & EXIT

MODIFY SETTING = 1P LEFT or RIGHT GAME TEST MODE DECIDE WITH = 1P SHOT! or SHOT2

SHOT 1

GAME CONFIGURATION ITEM DESCRIPTIONS

SOUND MODE PLEASE SET THIS ITEM TO STEREO FOR NORMAL OPERATIONS. SETTING TO "MONAURAL" WILL MAKE YOUR SOUND OUTPUT MONAURAL. (WHEN USING NAOMI CONVERTER KIT, PLEASE REFER TO PAGE 3.) DEMO SOUND HALF IF SET TO "ON", THE ATTRACT MODE DEMO SOUND PLAYS AT HALF VOLUME. (TO ENABLE THIS SETTING, "ADVERTISE SOUND" MUST SET "ON". PLEASE REFFER TO "NAOMI SYSTEM MENU" FOR DETAIL.) CONTINUE TURNS ON AND OFF THE CONTINUE FEATURE. DIFFICULTY SETS THE GAME'S DIFFICULTY LEVEL. THERE ARE 8 LEVELS IN TOTAL. AS THE NUMBER INCREASES. THE GAME GETS MORE DIFFICULT. DAMAGE LEVEL SETS THE ATTACK POWER. THERE ARE 4 LEVELS IN TOTAL. AS THE NUMBER INCREASES, THE ATTACK POWER INCREASES. (THUS THE AVERAGE PLAY TIME GETS SHORTER.) TIMER SPEED SETS THE TIMER SPEED. THERE ARE 4 LEVELS IN TOTAL. AS THE NUMBER INCREASES, THE TIME ELAPSES QUICKER. GAME SPEED SETS THE GAME SPEED. THE FOLLOWING ARE AVAILABLE: “NORMAL": REGULAR SETTING. “TURBO": QUICKER GAME PLAY. “FREE SELECT": ALLOWS THE PLAYER TO SELECT "NORMAL" OR "TURBO". EVENT USE THIS FUNCTION FOR EVENTS/TOURNAMENTS. IF SET TO ON, ONLY | CREDIT IS REQUIRED FOR 2 PLAYERS "VS." GAME. HOWEVER, THE GAME WILL BE OVER FOR BOTH PLAYERS REGARDLESS OF THE GAME RESULT. PLEASE SET THIS TO OFF FOR STANDARD OPERATIONS. JOIN-IN USED TO TURN ON AND OFF THE JOIN-IN FEATURE. PLEASE SET TO ON FOR STANDARD OPERATIONS. IF YOU WISH THE GAME SETTING TO BE PLAYED BY | PLAYER ONLY(ADVISABLE FOR BEGINNERS). SET TO. OFF. DEFAULT RESETS ALL THE SETTINGS TO THE FACTORY DEFAULTS. (INITIALIZE) NOT ONLY THE GAME CONFIGURATION BUT ALSO THE SETTINGS IN NAOMI SYSTEM MENU(COIN ASSIGNMENTS, ETC.) WILL BE RESET TO THE FOLLOWING FACTORY DEFAULTS.

ADVERTISE SOUND:ON
MONITOR TYPE:HORIZONTAL
COIN CHUTE TYPE:COMMON
COIN/CREDIT SETTING=:#1 (1 COINS 1 CREDIT)
SEQUENCE SETTING:SEQI=1 (1 CREDIT TO START)

SEQ2=1 (1 CREDIT TO CONTINUE) FOR MORE DETAILS REGARDING THE NAOMI SYSTEM MENU, PLEASE REFER TO THE "NAOMI SERVICE MANUAL." SAVE & EXIT SAVES YOUR GAME CONFIGURATION AND COIN/SYSTEM ASSIGNMENTS AND RETURNS TO THE GAME TEST MODE. (IT TAKES APPROXIMATELY 2 SECONDS TO SAVE THE SETTINGS. PLEASE DO NOT TURN OFF THE POWER WHILE SAVING.)

11 Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC.

Page 17

@ GAPEON co-op. inc. CAPCOM VS. SNK™

GAME CONFIGURATION OPTIONS

SOUND MODE STEREO : MONAURAL

DEMO SOUND HALF

CONTINUE

DIFFICULTY

DAMAGE LEVEL we b

TIMER SPEED

GAME SPEED FREE SELECT

JOIN-IN

NOTE: FACTORY S G4

DEMO SOUND HALF setting is available only when ADVERTISE SOUND is set to ON. ADVERTISE SOUND setting can be found under the SYSTEM ASSIGNMENTS menu of the NAOMI SYSTEM MENU.

Sound setting and output terminal (please refer to GAME CONFIGURATION to set the SOUND MODE)

SOUND MODE OUTPUT TERMINAL SOUND JAMMA HARNESS ONLY MONAURAL STEREO STEREO OUT STEREO

JAMMA HARNESS ONLY MONAURAL STEREO OUT MONAURAL

In case you wire both "JAMMA harness" and "Stereo Out," the sound will only go through "Stereo Out" and not the JAMMA harness.

Proprietary and confidential information, not to be disclosed or copied without the express permission of CAPCOM® COIN-OP, INC.

Page 18

WARNINGS & NOTICES

WARNING

A very small portion of the population has a condition which may cause them to experience epileptic seizures or have momentary loss of consciousness when viewing certain kinds of flashing lights or patterns that are present in our daily environment These persons may experience seizures while watching some kinds of television pictures or playing certain video games. People who have not had any previous seizures may nonetheless have an undetected epileptic condition.

If you or anyone in your family has experienced symptoms linked to an epileptic condition (e.g. seizures or loss of awareness), immediately consult your physician before using any video games. We recommend that parents observe their children while they play video games. If you or your child experience the following symptoms: dizziness, altered vision, eye or muscle twitching, involuntary movements, loss of awareness, disorientation, or convulsions, DISCONTINUE USE IMMEDIATELY and consult your physician.

Federal law provides severe civil and criminal penalties for the unauthorized reproduction, distribution, or exhibition of copyrighted audiovisual works and video games. The Federal Bureau of Investigation investigates allegations of criminal copyright infringement.

NOTICE

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

Information in this manual is subject to change without notice. CAPCOM COIN-OP, INC. reserves the right to make improvements in equipment function, design, or components as progress in engineering or manufacturing methods may warrant.

No part of this publication may be reproduced by any mechanical, photographic, or electronic process, or in the form of a photographic recording, nor may be transmitted, or otherwise copied for public or private use, without permission from the publisher.

CAIRCOMY COIN-OP, INC. 475 Oakmead Parkway Sunnyvale, CA 94086 Phone: (408) 774-0500 Fax: (408) 522-5331

Copyright © 2000 CAPCOM ® COIN-OP, INC., All Rights Reserved