CATHODE RAY TOMES

Wheel of Fortune Service

Wheel of Fortune (JAKKS Pacific TV Game, Game-Key Ready) (Jul 11 2005 ORIG) (JAKKS Pacific Inc / HotGen Ltd, 2005) · Document · 44 pages · 25 sections · original scan

Page 1

OWNERS AND SERVICE MANUAL

INNOVATIVE CONCEPTS IN ENTERTAINMENT INC. 10123 MAIN STREET, CLARENCE, NY 14031 SERVICE: 1-716-759-0360 FAX: 1-716-759-0884 E-MAIL: service@icegame.com WEBSITE: icegame.com

Page 2

TABLE OF CONTENTS

INTRODUCTION

GAME FEATURES GAME PLAY

INSTALLATION

BEFORE YOU BEGIN INSTALLATION

PROGRAMMING OPTIONS

INTRODUCTION HOW TO ADJUST OPTIONS USING THE PROGRAMMING OPTIONS

MAINTENANCE

QUICK TROUBLESHOOTING

GAME REPAIR

OPERATIONAL BACKGROUND TROUBLESHOOTING PHILOSOPHY MECHANICAL REPAIR

PARTS LISTINGS

SCHEMATICS

WARRANTY INFORMATION

Page 3

INTRODUCTION

GAME FEATURES

Thank you for purchasing the new Wheel of Fortune" game from |.C.E. By combining the great play appeal of Cyclone", the great name recognition of the immensely popular TV show Wheel of Fortune", and by adding the spinning wheel and great game sounds, we’ve taken the “Quick coin” game to a new level. You'll find this game to be a huge money earner now and for years to come.

Game cabinetry is stylish, yet bright and attractive using “glitter” decals to give it a glitzy look. The game has been designed as a centerpiece game that will enhance the look of any location. Thick 16 gauge metal panels and marine grade water resistant plywood make the game extremely durable. The top of the cabinet is made of a special high impact styrene that is easy to maintain, and a thick acrylic dome that is extremely strong, and more scratch resistant than polycarbonate. Up higher, the glitter covered marquee flashes the wheel of fortune letters to attract game players. Brilliant backlighting of the playfield completes the look.

Electronics and sounds are the state of the art in digital technology. Robust design ensures a long trouble free life for your game. The game is very flexible with its programming options to allow it to be tailored to most locations easily. (For special non-standard options, call our service department for details). GAME PLAY

The object of the game is to spin the wheel in the hope that it stops at the big bonus values.

To spin the wheel the player must stop the rotating light in the “Spin Zone”.

This will automatically spin the wheel for the player. The wheel spin is totally random. As is where the wheel stops.

Page 4

BEFORE YOU BEGIN

WARNING: WHEN INSTALLING THIS GAME, A GROUNDED A.C. RECEPTACLE MUST BE USED. FAILURE TO DO SO COULD RESULT IN INJURY TO YOURSELF OR OTHERS. FAILURE TO USE A GROUNDED RECEPTACLE COULD ALSO CAUSE IMPROPER GAME OPERATION, OR DAMAGE TO THE ELECTRONICS

DO NOT DEFEAT OR REMOVE THE GROUNDING PRONG ON THE POWER CORD FOR THE SAME REASON AS GIVEN ABOVE. USING AN IMPROPERLY GROUNDED GAME COULD VOID YOUR WARRANTY.

HAVE A QUALIFIED ELECTRICIAN CHECK YOUR A.C. RECEPTACLE TO BE SURE THE GROUND IS FUNCTIONING PROPERLY.

INSTALLATION

The game comes ready to play with just a few simple things to keep in mind.

  • When installing the game, be sure you use a grounded A.C. outlet. If necessary, have it checked to be sure the ground is good.

THIS GAME IS DESIGNED TO DISSIPATE STATIC ELECTRICITY THROUGH THE GROUNDING PLANE OF THE GAME. IF THE A.C. GROUND DOES NOT WORK, THE GAME COULD DISCHARGE STATIC ELECTRICITY THROUGH THE GAME CIRCUITRY, WHICH COULD CAUSE DAMAGE.

Make sure the game is level after installation. It is necessary to make sure the game is level so the game will work properly. TOOLS YOU WILL NEED

The game normally comes fully assembled and ready for use.

If however, you need to disassemble or reassemble the marquee to the game for any reason, all that is needed is a Phillips screwdriver, 7/64” Allen wrench and a 7/16” socket and ratchet.

Place the game into its final location and use the adjusting feet to level the game. This is important to do, to assure proper operation of the game.

CAUTION: CHECK THAT THE A.C. VOLTAGE RATING ON THE BACK OF THE GAME MATCHES THE A.C. VOLTAGE OF YOUR LOCATION.

THE POWER SUPPLY IS NOT VOLTAGE ADJUSTABLE.

TO OPERATE THE GAME AT VOLTAGES OTHER THAN THOSE IT WAS DESIGNED FOR, PLEASE CONTACT OUR SERVICE DEPARTMENT FOR VOLTAGE CONVERSION INFORMATION.

Plug the game into the A.C. outlet and turn power to the game on. The switch for the game is located on a power module inside the game.

It is now time to program your game&&..

Page 5

PROGRAMMING OPTIONS

INTRODUCTION

The Wheel of Fortune" game is extremely flexible from a programming standpoint. This allows the customer to “fine tune” the game to his or her exact needs.

This section will describe in detail each of the programming options and how they work.

PLEASE READ THIS SECTION THOROUGHLY BEFORE CALLING OUR SERVICE DEPARTMENT. MOST QUESTIONS REGARDING SET-UP AND OPERATION WILL BE FULLY EXPLAINED HERE.

HOW TO USE THE PROGRAMMING OPTIONS

PROGRAMMING BUTTON - Use this button to enter and exit the programming mode. Press this button once to enter the mode, and once again to exit the mode.

SELECT BUTTON - Use this button to scroll through and “step” through the various options.

CHANGE BUTTON - Use this button to “change” the value of a particular option.

“RES. ‘CHANGE E SELECT BUTTO PROGRAMMING BUTTON aS cx SETTING YOUR PAYOUT PERCENTAGE

The game has three basic adjustments to allow for percentaging the game properly. They are as follows:

LIGHT RING VALUES - These values can be changed through programming to allow for different ticket and game play values.

WHEEL JACKPOT VALUES - These can be changed through programming to allow for different ticket and game play values.

DIFFICULTY - This makes it easier or harder to hit the “spin zone” target. This will make the wheel spin less or more often. The wheel is set up with a difficulty of “6” from the factory. This allows the average player to spin the wheel about once every 20 times.

This setting is what we recommend you start with. It is

important to keep it difficult enough to spin the wheel to keep the game interesting, but not so hard that it can’t be done. It is important for bystanders to see that it is easy enough to do, so they will want to play as well. CHANGING THIS SETTING IS THE EASIEST AND MOST EFFECTIVE WAY OF CHANGING YOUR PERCENTAGING.
Page 6

PROGRAMMING OPTIONS

FORMULATING YOUR PERCENTAGES

The game comes from the factory based on a average 25 cent play, and a 1 cent retail ticket value, with a payback of 40%.

AT THE END OF THIS SECTION ARE SOME BASIC EXAMPLES OF PAYOUT COMBINATIONS AND THE FORMULA FOR TRYING YOUR OWN COMBINATIONS. IF YOU ARE UNABLE TO MAKE ANY OF THESE COMBINATIONS WORK FOR YOU, PLEASE CONTACT OUR SERVICE DEPARTMENT.

COINS PER CREDIT (OPTION #1)

This option determines how many coins are needed to obtain 1 “credit”. Setting a “0” puts the game into free play mode. The range for this option is 0-10. The default value for this option is “1”.

GAMES PER CREDIT (OPTION #2)

This option determines how many games or turns the player gets per credit. This option is useful if you have a minimum coin value that is so high you need to give the customer multiple games to get good value. The range for this option is 1-10. The default value for this option is “1”.

CREDIT DISCOUNTING (OPTION #3)

This determines the number of consecutive credits (without playing a game) given before dispensing a free game.

For example, if this option was set to “2”, each time 2 coins IN A ROW were put in, a free game would be given.

The range for this option is 0-10. The default value for this option is “0”.

VOLUME (OPTION #4)

This option determines the sound volume of the game. Setting a “0” turns the sound to minimum. Setting a “10” ATTRACT TIME (OPTION #5)

This option determines the duration of time between attract modes in minutes. The range for this option is 1-30. The default value for this option is “2”.

ATTRACT MODE TYPE (OPTION #6)

This option determines what type of attract mode (if any) is used. Setting a “O” turns the attract mode off. Setting a “1” makes sound only. Setting a “2” spins the wheel only. Setting a “3” gives both sound and the wheel spin. The default value for this option is “3”

JUST FOR SPINNING TICKETS (OPTION #7)

Enabling this option will give the player a predetermined amount of extra or “bonus” tickets before the wheel is spun. The tickets will begin to pay out as the wheel begins to spin. The range for this option is 0-50. Setting a “0” turns this option OFF. The default value of this option is “0”.

Page 7

PROGRAMMING OPTIONS

ZONE VALUES WHEEL JACKPOT VALUES (OPTIONS #8-27) The jackpot values can be adjusted through programming and by changing the decals themselves. This helps to The ring light values can be adjusted through programming adjust for differing game play and ticket values and by changing the decals on the playfield itself.

This determines the ring light values for zones 1-20. Each zone can be set to pay out 0-20 tickets. The chart below will give you the default values for each zone, as well as translate the option number to the zone. Please see the chart above to realize the proper relationship between zone, option number, and position on the playfield. Example, Zone 10 is to the immediate right of the “spin zone” and is option #16.

OPTION# ZONE# = DEFAULT NON-HOME JACKPOT VALUE, ZONE

81310
923(OPTION #28)
1034
1144This is the white jackpot wedge BELOW the words Wheel
1255of Fortune on the center hub of the wheel. The numbers
1365are removable and can be replaced with the other values
1476supplied with the game.
1587
1698The range for this option is 0-1000. The default value for
171010this option is “300”
181110
19128

i z HOME JACKPOT VALUE

22155ZONE 0
23165(OPTION #29)
24174
25184This is the white jackpot wedge ABOVE the words Wheel

oF 3 of Fortune on the center hub of the wheel. The numbers

are removable and can be replaced with the other values supplied with the game.

The range for this option is O-1000. The default value for this option is “500”

Page 8

PROGRAMMING OPTIONS

BIG JACKPOT LOCKUP (OPTION #30)

This option will allow the game to “Lock up” when either of the jackpot wedges are hit. This allows the location to save on tickets if the jackpot wedges are set to pay out a high amount. To clear the lock up, open the coin door and hit the “Ticket Reset” button on the cash box enclosure. The range for this option is 0-1. Setting a “1” turns this feature ON. The default value for this option is “0” (off).

WHEEL DIFFICULTY (OPTION #31)

this option determines how hard it is to stop the light in the “Spin Zone”. This adjusts the size of the “time window’ to make it easier or harder. The numbers available represent MILLISECONDS (1/1000" of a second).

The range for this option is 1-20. The default value for this option is “6”.

When the game is set to “6”, average players will hit the spin zone approximately once every 20 times. This is where we feel the game works best, balancing difficulty with the excitement of being able to hit the target on a consistent basis.

CHANGE THIS SETTING TO RASIE OR LOWER THE PAYBACK PERCENTAGE.

In the event that the wheel difficulty needs to be changed, please use the chart below to give you a rough idea of how your changes will affect game play. These numbers will vary according to the age group and skill of your customers.

MILLISECONDS 1 IN XXXXXX HITS

1 IN 300 1 IN 120 1 IN 60 1 IN 45 1 IN 30 1 IN 20 (DEF) 1 IN 10 1IN5 ONOADRWNA= WINABILITY (OPTION #32)

If you wish to keep your percentages more accurate, or have some especially talented players that always win easily, you may want to use this option.

What win ability does is this. You set the “wheel difficulty” option to a number that is harder to win such as “3” ( a one in 60 hit average). You then set this option to “20”. This means that after 20 games are played, the difficulty window will open to full open making it much easier to win. This way you'll get a winner about every 20 games or so, but the more talented player would have to be much better to win. Since this still works based solely on skill, it remains fair and winnable for the advanced player, but will get easier to allow less skillful people to win as well.

The range for this option is 0-100. Setting a “O” turns this option OFF. The default value for this option is “O”.

COUNTER TYPE (OPTION #33)

This option determines how the money counters work in the game. Setting a “0” has the counters work so that each time a COIN is inserted the counter will increment 1. Setting a “1” has the counter work that each time a CREDIT (one OR MORE coins) is inserted and earned, the counter will increment by 1. The default setting for this option is “0” (Advances once for each coin inserted).

SOUND LOOP (OPTION #34)

This option will loop a money payout sound and lock up the game until all tickets have been dispensed IN THE EVENT OF A JACKPOT. This can add extra excitement to the game. The range for this option is 0-1. Setting a “1” turns this option on. The default value for this option is “O”, OFF.

Page 9

PROGRAMMING OPTIONS

FACTORY RESET (OPTION #35)

This option is used to GLOBALLY RE-SET all of the software settings to the FACTORY DEFAULT. Setting a “1” will re-set all of the settings to their factory default as when you first received the game. The default value for this option is “0” (NO RE-SET).

IF YOU HAVE ANY QUESTIONS OR COMMENTS, PLEASE CONTACT OUR SERVICE DEPARTMENT AT:

716-759-0360

MON. THRU FRI. 8AM-6PM EST

GAME SETTING EXAMPLES

The examples shown below are intended to act as a guide when setting up your game. Please be advised these are generalities and your game in all likelihood will need to be adjusted for your particular clientele.

25-cent play - 1—cent ticket (spin zone) 7-6-6-5-5—4—4-3-3-2 Jackpot 500 - 300 6 MS Difficulty setting (average 1 in 20 spins)

80-cent play - 5—cent ticket (spin zone) 5-4—3-—2—2-2-2-2-1-1 Jackpot 500 - 300 6 MS Difficulty setting (average 1 in 20 spins)

50-cent play - 1—-cent ticket (spin zone) 10-10—9-9-8-8-7-7-7-7 Jackpot 900 - 900 7 MS Difficulty setting (average 1 in 15 spins)

5-cent play - 1—-cent ticket (spin zone) 2-1—0—0-0-—0-—0-0-0-0 Jackpot Bankrupt - Bankrupt 5 MS Difficulty setting (average 1 in 30 spins)

PAYOUT CALCULATION FORMULA

If you would like to try to figure out your own payout calculations, please use the formula on the next page.

Page 10

1. Total Wheel Value

=905+J1+J2

E+F+GtH+l+J [a+B+c+p]+[E*F*G*Helty)) TT oossstss2 5 20

Assign Ticket Values to A-J, y (normally 19), and Jackpot 1 (J1; normally 300) and Jackpot 2 (J2; normally 500)

  • Add up values of A-D
  • Add up values of E—J and Divide by 6
  • Add the number you get in Step 2 to the number you get in Step 3 5.

ra A Take the number you get in Step 4 and divide it by 5 . Take the number you get in Step 5 and multiply it by (y) Add 905, J1 and J2 and divide that number by 20 dd the number you get form Step 6 and Step 7 together and divide that number by 20

*** This calculation assumes that the values on both sides of the spin zone are set the same. If you set the 2 sides different, run this calculation for both sides and average.

Page 11

MAINTENANCE

GENERAL MAINTENANCE

This game has been designed to be as trouble and maintenance free as possible.

With this in mind the only basics are to keep the game clean. Below are the main areas to take care of with specific directions.

DOME

The dome should be cleaned with a soapy water solution if covered with water based dirt such as food products. After cleaning with soapy water, polish with a commercial plastic polish or a spray furniture polish. These have lubricating oils that condition the plastic and keep it shiny and clear looking. Never use regular glass cleaners as the ammonia in them actually damages the plastic and dulls it.

Any deep scratches can be reduced or eliminated with a scratch removing polish and buffing wheel.

CABINET

The cabinet plastic and decals can be cleaned with soapy water or spray furniture polish. DO NOT use any alcohol or petroleum based cleaners as they could damage the plastic or printed parts.

COIN MECHANISMS

The coin mechanisms should be cleaned periodically, as they will accumulate dirt which will cause the coins to stick.

Remove the coin mech and clean them in a dish detergent solution and a stiff brush. Dry thoroughly and re-install. TICKET DISPENSERS

The biggest problem ticket dispensers have is ticket dust blocking the optical detectors. It is a good idea to occasionally use compressed air to remove the dust from the dispensers.

Page 12

QUICK TROUBLESHOOTING

GAME WILL NOT TAKE OR ADD MONEY CORRECTLY Micro switch not working or returning properly. Check and repair or replace as necessary. Bad Harnessing or connector. Check w/ohm meter and repair as necessary. Game programming set incorrectly. Check programming option and re-program if necessary. Bad Main P.C. Board. Check and repair or replace as necessary.

STOP BUTTON WILL NOT FLASH WHEN GAME HAS CREDITS, OR WORK WHEN PUSHED Micro switch not working properly. Test and replace as necessary. Micro switch popped out of housing. Snap back into housing. Burned out light bulb. Replace light bulb. Bad harnessing or connector. Check w/ohm meter and repair as necessary. Bad Main P.C. Board. Check and repair or replace as necessary.

GAME HAS NO SOUND Bad speaker. Check w/ohm meter for 4 or 8—ohm load. If not within this range, replace. Volume level set incorrectly. Check volume level in programming, and adjust if necessary. Bad Harnessing or connector. Check w/ohm meter and repair as necessary. Bad Main P.C. Board. Check and repair or replace as necessary

TICKET DISPENSER DOES NOT WORK OR WORKS IMPROPERLY Bad ticket dispenser. Repair or replace as necessary. Bad harnessing or connector. Check w/ohm meter and repair as necessary. Bad Main P.C. Board. Check and repair or replace as necessary. Game out of tickets. Add tickets Optical sensor on ticket dispenser dirty. Remove paper fuzz and debris with a soft brush.

NO FLORESCENT LIGHTING Bulb burned out. Replace bulb. Electronic ballast bad. Replace ballast. Harness bad or harness unplugged. Check w/ohm meter and plug in, repair or replace as necessary. No A.C. power to the game or Main fuse bad. Check fuse and A.C. power.

ALARM SOUND DOES NOT WORK OR FALSE TRIGGERS (OPTIONAL) Bad Main P.C. Board. Check and repair or replace as necessary Bad Harnessing. Check w/ohm meter and repair or replace as necessary. Alarm Plum bob set up improperly. Check for proper plum bob clearance and adjust as necessary. Game not level. Level game to be sure plum bob is operating correctly. Game unplugged. Plug game back in and test for proper operation.

WHEEL WILL NOT SPIN OR SPINS SLOWLY Bad Motor. Check or replace as necessary Bad harnessing. Check and repair as necessary Bad motor cooling fan causing overheating of motor. Replace fan. Clicker solenoid not disengaging properly. Check and replace solenoid if necessary. Clicker return spring. Check and replace spring if necessary.

Page 13

QUICK TROUBLESHOOTING

LIGHT RING DOES NOT LIGHT Bad Main P.C. Board. Fix or replace main board. Bad light ring board. Find problem board and replace or repair as necessary. Bad light ring board harnessing. Repair as necessary. Blown fuse on Main P.C. Board. Replace fuse. Check for problems.

MARQUEE DOES NOT LIGHT Fuse blown on main P.C. Board. Replace fuse. Harnessing between marquee and main board bad. Check and repair as necessary. Bad Marquee P.C. Board. Repair or replace as necessary.

CREDITS OR TICKETS OWED DISPLAYS DON’T WORK PROPERLY Bad Display P.C. Board. Repair or replace Display board Bad Main P.C. Board. Repair or replace Main board. Bad display harnessing. Repair as necessary.

CAN’T ENTER OR EXIT PROGRAMMING OR OTHER ADJUSTMENT MODES Bad programming or adjustment buttons. Replace buttons. Check harnessing. Harnessing fell off back of button. Re—attach harnessing. Bad Main P.C. Board. Repair or replace Main board.

Page 14

GAME REPAIR

WARNING: ALWAYS REMOVE POWER TO THE GAME BEFORE ATTEMPTING ANY SERVICE, UNLESS NEEDED FOR SPECIFIC TESTING. FAILURE TO OBSERVE THIS PRECAUTION COULD RESULT IN SERIOUS INJURY TO YOURSELF OR OTHERS.

OPERATIONAL BACKGROUND

The Wheel of Fortune" game has been manufactured with modular design in mind. Almost everything in the game can be EASILY removed for servicing. This makes it much easier for the repairman as he /she can work in a quieter less distracting environment away from the Game Room floor. The game relies on 1 brushed DC for the mechanical spinning of the wheel. This motor can be accessed easily for service.

Coin and low ticket sensing are done with conventional micro switches. In all areas of critical importance, optical sensors were developed specifically, and optimized for their particular application.

All P.C. Boards are made of premium quality board material and use time proven components to assure you of the most reliable designs possible.

We have put forth our best efforts and tested this game extensively to assure the best possible performance under the widest variety of operating conditions. We are ALWAYS however interested in our customers input for product improvement. If you have any questions or comments please feel free to contact our service department.

I.C.E. SERVICE DEPARTMENT 716-759-0360 NORMAL BUSINESS HOURS ARE: MONDAY - FRIDAY, 8:00 AM TO 5:00 PM TROUBLESHOOTING PHILOSOPHY

To find problems with the game, always first check what should be obvious. See that the game is plugged in, and that all of the fuses on the game are good. This includes the fuse that is located INSIDE the power module.

Next, check to see that all of the connectors are firmly seated and that none of the wires have been pulled out of them.

When trying to find out if specific components are bad or not, try swapping them with components from another player station to see if the problem moves with the component, or stays where it was. This will help you to know if you have a problem with a specific component, or maybe a problem with either the wiring or the Main P.C. Board.

Use extreme caution when using probes or voltmeters if the game is powered up. If doing continuity checks, it is

important to disconnect the harnessing at both ends, as attached they may yield erroneous results.

If a P.C. Board is suspected as the cause of a problem, check to see that all of the components on the board are firmly attached. Pay special attention to any socketed devices.

If light bulbs are suspected, swap them with one that is known to work to narrow the problem down to either a bulb or P.C. Board.

Page 15

GAME REPAIR

REPLACEMENT & REPAI R Remove the plastic spacers that hold the board in place.

Remove the connector to the board. LIGHT RING SERVICING

Service the light ring as follows:

Remove the Allen bolts that hold the cover on to the cabinet.

Assemble in the reverse order.

Lift the cover up and remove the dome. (See dome replacement instructions) MOTOR SERVICI NG / Remove the 2 wheel clickers by unscrewing them. RE PLACE M ENT

Service the motor as follows:

Remove the Allen bolts that hold the cover on to the cabinet.

Page 16

GAME REPAIR

Lift the cover up and remove the dome. (See dome replacement instructions)

Remove the wheel by unscrewing the 3 screws that hold

=— PP S8

Remove the motor by unscrewing the screws that hold it in place.

Disconnect the plug on the motor from the motor harness.

Assemble in reverse order. MARQUEE BULB / P.C. BOARD SERVICE

To replace a light bulb or remove the P.C. Board follow the directions below.

Remove the Phillips head screws that hold the marquee cover in place.

Remove the bolts that hold the inside wood housing together.

SETTLE Bs

Remove the main p.c. board by removing the screws and connector that hold it in place.

Reassemble in reverse order.

Page 17

GAME REPAIR

CREDITS / TICKETS OWED P.C. BOARD SERVICE DOME REPLACEMENT

Remove the Allen head bolts that hold the cover to the cabinet. Remove the Allen bolts that hold the cover on to the cabinet.

Lift up the cover and remove the Dome. Set the new dome onto the playfield centered evenly in the game.

Lower the cover and bolt into place.

IF YOU HAVE ANY QUESTIONS OR COMMENTS, PLEASE CONTACT OUR SERVICE DEPARTMENT AT: Reassemble in reverse order.

716-759-0360

MON. THRU FRI. 8AM-6PM EST

Page 18

Parts denoted with * indicate available as part of

PARTS LISTINGS

a specially discounted spares kit.

MECHANICAL PARTS

BW250X FP1004 HR1019 1024 1026 WF 1050 CP1051 WF1051 WF1052 WF1053 WF1054 WF1055 WF 1056 WF1060* CG1068 HR2005 AR2007 BW2017 Bw2018 2027 CC2027 HH2050 2364G WF3001 WF3004* WF3005 WF3024X HH5005 5101X WF6001X* 6321 BW8284xX 8312* WF9010 Low Ticket Micro Switch PLL Bulb Socket Assembly Leg Leveler Mounting Bracket Leveler Foot Ticket Bin Bracket, Low Ticket Switch Mounting Clicker Pole, Teflon coated Tilt Sensor Wheel Hub Wheel Pin, 1” Wheel Pin, 1.5” Wheel Pin, 2” Wheel Pin, non extension Flag, Opto beam breaker Clicker Spring Bushing, bronze oil impregnated Large round white push button Speaker, 6” x 9” PLL Bulb Retaining Clip PLL Bulb Support Fan, DC 12 Volt Power Cord, 20ft. Power Module Fan Guard Cabinet Cover Clicker (pointer) Marquee Housing Dome Assembly, with tape Ticket Dispenser

Mech Holder Assembly

Parts Package 3/8” E-Clip Workhorse 6 Ballast, ( WH6-120-L) Bulb, PL-L 40W/41/RS/IS Florescent Cover, clicker sensor (black card) ELECTRONIC / ELECTRICAL

WF2002X_ Transformer 2005* 906 Light Bulb 2008* Solenoid, Spring Tensioner PP2011X* Wheel Motor, D.C. WF2034X Main P.C. Board WF2037X* Marquee P.C. Board WF2038X* Clicker Position P.C. Board., Large WF2039X* Clicker Position P.C. Board, Small WF2040X* Wheel Position P.C. Board, Outer WF2041X* Wheel Position P.C. Board, Inner 2110 TIP 122 Transistor 2117 IC, 74hc14 2305 IC, 74hc273 CC2032xX* Tickets Owed Display P.C. Board CC2035X* Light ring board (banana board) 2295 Fuse, MDQ6 (6 amp slo blo) 2315 Fuse, MDQ3 (3 amp slo blo)

DECALS AND GRAPHICS

WF7001 Side Panel Decal WF7002 Center Wheel (sold w / WF7013) WF7004 Podium Side Decal WF7005 Instruction Plate Decal WF7006 __ Ticket Arrow Decal WF7013 Outer Ring ( sold w / WF7002) WF7014 Clicker overlay glitter decal WF7015 Monaco Logo Decal WF7027 Marquee Panel WF9001 Service Manual

Page 19

4 3 2 4

#WF2002X-ORANGE | 441.3. VAC
TRANSFORMER ASYvee2BAC

. BLUE | 4 | | 16.8 vac

J BLALK®YeLLow]@
16 ||evac
2 GREENNELLOWonance|& |/8NAC|

3 ;BLAGK 8

#WF2002BROWNaI14 vac
3 PIN PLUG #2206TRANSFORMERREDigae
PINS 1&3: 20-14 AWG(2-51-0118)BROWN]42 | | 14,vAC

MALE PIN # 8260

115 VAC 60~ 18 AWG MALE PIN # 8260

15" GREEN/YELLOW

BK

BK D

oR UE" 6 VAC @ 10.45A 4 AWG

11.3 VAC @ 9.0A 4 AWG

16.8 VAC @ 3.75A 18 AWG

4 VAC @ 2.75A, 18 AWG

Is VAC @ 0.50 8 AWG MALE PIN # 2422 12 PIN PLUG #2106 PINS 2-6,9,12: 20-14 AWG.

PINS 1,7,10-11: 14-18 AWG

  • Add 6" of Large Spiral Wrap Starting 4" from the 12-Pin Plug #pc20217 TO BASE OF TRANSFORMER

QTY PER GAME

TITLE Wheel Of Fortune

DESCRIPTION #WF2002X - TRANSFORMER ASY. FILENAME —WFREV2.VSD

DRAWNBY = MMARTIN

DATE 2/29/00 REVISED 6/13/01 PAGE 1 OF 25

Page 20

To Cabinet Frame To Cabinet Frame

soso @p-GREENVELLOW s908¢ @+—~<

TO BASE OF TRANSFORMER GREENIYELLOW 66) yos2

QTY

  • PER GAME

TITLE Wheel Of Fortune

DESCRIPTION #WF2004X - GROUNDING STRAP FILENAME ~==WFREV2.VSD.

DRAWN BY MMARTIN

DATE 2/29/00 REVISED 6/26/01 PAGE 2 OF 25

Page 21

To Wheel Motor . + Hamess #PP2011-MOTOR 5,

+ 143VDC4LIGHT BLUEnqn
+ 13VDC2LIGHT BLUE# 2163 - DIODE 1N4004
WHEEL,3-BLACK/BLUE2" # 8380 -1/8" CLEAR
WHEEL4 | BLACK/BLUEL|lISHRINK TUBE

D> 4 PIN PLUG #2099 SOLID PIN #21008 — —

QTY | 1} PER GAME TITLE Wheel Of Fortune FILENAME — WEREV2.VSD pesoniprion # WF2008X - WHEEL MOTOR ASSEMBLY ORAWNBY — MMARTIN DATE 2/29/00 REVISED 513/01 PAGE = 30F 25

Page 22

To Clicker! " Control Panel 74 a ORANGE | 4 [+ 12v0c

ae2|+12vDc

NGE 3 | + 12v0C 4 | +svpc BLACK | 5 | p GND BLACKIWHITE | 8 | 5 GND BLACKWHITE | 7 |) GND yellow | g | DpATA yellowigreen | 9 | or To Mainboard yellow/white | 49 | Click P4 VIOLETIBLACK | $9 | Teusu

ssv]1BeamYELLOWIBLACK | 13 | SSV
cont | | 2;vidleliblue44 | SOL
SoLt3[YELLOW/BLACKwe15
Tenti | | 4.[ioletiveliow15 PIN CAP #2967=

Loon SNT" | | # Tantbiack FEMALE PIN #2102

pusi|| @Lwoletigra
Con: | | 7.[wioletigreen:.
cLick1 | | 8[yellowlwhite48COIN COUNTER

#2558,

crust | | 9/WOLETBLAGKvioleviblue f255%qblagss#pc20224

+1avoc | | 10 -oange 12v COUNTER + t2voc | | 11 ORANGE yiavoc | | 42 LORANGErorange OND | | 43 LBLACKMWHITE Dlackiwhite

Saip{2 [BLACKIWAITETbrackwhteSaas

0000000000 #020224 12v COUNTER 15 PIN PLUG #2144 SPLIT PIN #2100 20-14 AWG PIN #8260 PINS 12+ 15 76" 1 orange _-, #850 To Mainboard “280 aS coin L

P13blackiwhite #650TO Colin Lamps

P13 110 KEY 75" . key | 1 [KEY " +svoc | 2 [RED 80___anblack oy "3145 sockout

CLK2|3LYellow/areen:
ppata | 4yelloworange ggg #851Coils

ORANGE:

eee5BLACK.
KEY72violetigreen xq #6537

KEY | 7 cere 250 To Coin Switch #2293 7-PIN AMP HOUSING blackiwhite ay 9537 AMP CONTACT PIN #2201 #2239 KEY PLUG. 156 QTY | 1] PER GAME TITLE Wheel Of Fortune FILENAME ~=WFREV2.VSD. DESCRIPTION #WF2011AX - P2 STATION HARNESS DRAWNBY = MMARTIN

DATE2129/00REVISED6/13/01PAGE4 OF 25
Page 23

4 2 1 To Clicker! 65" a Panel a xt. ORANGE | 4 [+ 12voc ORANGE TBM + 12vDc ORANGE | 3 | + 12vDc RED | 4 | + 5vpc BLACK | 5 | p GND BLACKIWHITE | 8 | 5 GND BLACKWHITE | 7 |) GND whitelyellow] & | DpaTA white/green] § | ork To Mainboard white | 49 | cLick P2 VIOLETIBLACK | 4* | Cpusu P2 Gray | 49 | PUSH sev [7] 1 | REDIBLACK REDIBLACK] $3 | ssy

conti | | 2.Lwhite/biueYELLOWIBLACK ] 44 | SoL
SoLt|| 3LYELLOWBLACK|S45
tenti | | 4[atavvellow15 PIN CAP #2967=

Lockout | | $ Ganlbiack FEMALE PIN #2102

PUSH1622

con: | | 7 [-aravlareen 95"

cuck: | | 9butesosssCOIN COUNTER
upusnt | | 9[VOLETBLACKwhitefblue55%blac—#pc20204
+tavoc | | 10saeted12v COUNTER

en a ‘ORANGE *orange Den | | 13 LBLACKIWHITE Blackiwhite

Deno | | t¢(BLACKIWRITEsbacawnteKET COUNTER

+#P.C20224 9909000000 |) 42v COUNTER 15 PIN PLUG #2144 SPLIT PIN #2100 20-14 AWG PIN #8260 PINS 12+ 15 n ) orange _, #650 To Mainboard or .

P12lackiwhite 7 #650To Coin Lamps

P12 +10 KEY 67" key} 1 |4EY :

+svoc | 2RED88 _tanvblack cop 5*35 1 ockout
CLK | 3.LwhiteZareeni
pata | 4.Liwtitelyelloworange oa *5!Coils

ORANGE:

* une|g[BLACK6"

KEY | 7 /KEY _______®£ _aravlareen psy #853 To Coin Switch #2293 7-PIN AMP HOUSING. AMP CONTACT PIN #2201 #2239 KEY PLUG.156 black/white 9 #653T

QTY | 1] PER GAME TITLE Wheel Of Fortune

DESCRIPTION #WF2011X - P1 STATION HARNESS, FILENAME =WFREV2.VSD DRAWN BY MMARTIN

DATE2129/00REVISED6/13/01PAGE5 OF 25
Page 24

To Wheel Sensor Extention Harness

WSHORT 1 Lwhite/red 2] 3 Lwhite/brown, eee 4 [Dlackiwhite

+ 12VDC 5 white orange)

WHOME 6 | white/orange

6PIN PLUG #2173 SOLID PIN #21008 33" (ort 1 | +12v00 2 | InnerWheelshort To Inner Wheel black/white | 3 ——rihiterorange| P GND Sensor PCB 4 | InnerWheelHome 4 PIN AMP HOUSING #2429 AMP CONTACTS #2201

30" *2 orange 2 1 | +12v0c white/brown To Outer Wheel : 2 | OuterWheelL: L (2 _Blackiwnite| 3 |S’GND 2 =~ Sensor PCB

3 PIN AMP HOUSING #2045 ‘AMP CONTACT #2201

QTY | 1] PER GAME

TITLE Wheel Of Fortune

FILENAME ==WFREV2.VSD_ DESCRIPTION #WF2013AX - Wheel Sensor Harness DRAWN BY MMARTIN DATE 2/29/00 REVISED 6/13/01 PAGE 6 OF 25

Page 25
4321

To Control . Panel Harness =) 36 ORANGE | 4 |+12vDc ORANGE | 2 | +12vDC RED} 3 | +svoc BLACK! 4 | p GND BLACKWHITE| 5 | p GND Tost 6 | D Data liow/green| 7 | Clock VIOLETIBLACK | g | Button Light violevgray| g | Button a] 9 PIN CAP #2551 To Station FEMALE PIN #2102 Harness

+ pvoc4LORANGE10”voterBonusLigh
+12voc | | 2[ORANGE2omenTo Light Ril

‘© Light Ring

+ 12voc | | 3}ORANGEGRAYIBLACK! 3 |_| sonus Light-
pGnp| | 6-BLACKMWHITE3 PIN PLUG #2206

Deb | | 8 | acRCRNVAITE SOLID PIN #21008 D Data | | 8 [yellow [yellow/green VIOLET cnet | | 4h [yetowiwnite 33" GRAYIBLACK] 9 Bones Light

Button Light | | 11|MOLET/BLACKBLACKWHITE! 3. Ip GNDTo Clicker PCB

Buton | | 12 Lwoletira yellowiwhite] 4 [Och ssv | | 19 [REDIBLACK ORANGE] 5 [Cer SOL | | 44 [YELLOWIBLACK SPIN AMP HOUSING #2419 i AMP CONTACTS #2204 29" 7" REDIBLACK pq #851 | 12900 gp 7 REDIBLACK ggg #881

15 PIN PLUG #2144187 |187187,,

a YELLOWIBLACK gpm #651 | #2909 YELLOWIBLACK gery esi TO Clicker Solenoid 167 | ta7_— eee eal 87

#WF2013BX- SOLENIOD EXTENTION QTY]2] PERGAME

TIME Wheel Of Fortune pesoripion #WF2013X- CLICKERICONTROL PEeAME WEREV2VED. PANEL EXTENTION DRAWNEY MMARTIN

DATE2129100REVISED6/13/01PAGE7 OF 25
4321
Page 26

3 2 1

15" voc 1 BROWN BROWN 1 jsvDc cLock 2 | |cLock Donb| | 4 [ORANGE ORANGE|3 | |p GND pata) | 4 [YELLOW YeLLow] 4 | Inara LATCH| | 5 |GREEN GREEN | 5 | |LATCH PcND|_| 6 }BLUE BLUE’ 6 | |PGND 6 PINPLUG #2173 6 PINPLUG #2173 SOLID PIN #21008, SOLID PIN #21008,

QTY | 1| PER GAME Te Wheel Of Fortune pesoriprion #WF2014X- RING INTERCONNECT — [FILENAME WFREV2.VSD HARNESS DRAWNBY — MMARTIN DATE 2129/00 REVISED 5/3/01 PAGE 8 OF 25

Page 27

To Mainboard P6 KEY LSPKR + LSPKR -

RSPKR + RSPKR - KEY | KEY redigray * 2 92 brown/gray ] 250 #6537 To Left Speaker Of Station 2 Fedlaray 5655) 250 #6537

brown/gray * 2 Fedlgray 559 250 46537

Prownlaray <r 250 46537 To Left Speaker Of Station 1

rediwhite * 2 brown/white * 2 Noanona [KEY

7 PIN AMP HOUSING #2293, CONTACT PIN #2201 PINS 1 & 7: KEY PLUG #2239 102" rediwhite 6&9 250 46537

brown/white To Right Speaker Of Station 1 260 #6537

84" rediwhite ofS] 250x653

To Right Speaker brown/white 29 250 46537 Of Station 2

QTY} 1 PER GAME

me Wheel Of Fortune

FILENAME ~=WFREV2.VSD DESCRIPTION # WF2018X - SPEAKER HARNESS DRAWN BY MMARTIN

DATE 2/29/00 REVISED 7/23/01 PAGE 9 OF 25

Page 28

3 2 1

40"

pennYa[blackiwhiteblack/whiteDGND

RED RED

svoc|| 22 ||svoc

yellow yellow

pata]| 33 | | DATA

BLACK BLACK

PGND]| 4} eeereORANGE|4 |[PGND
12v0C | | 5byellowlgreenalowigreen | °ae
cLock6 etowlssetowls6CLOCK

6PIN PLUG #2173 SOLID PIN #21008, 6PINPLUG #2173 SOLID PIN #2100

QTY | 2] PER GAME

TITLE Wheel Of Fortune

DESCRIPTION | eNEgS #WF2022X- DISPLAY INTERFACE — [FILENAME WFREV2.VSD DRAWNBY — MMARTIN

DATE 2/29/00 REVISED 6/13/01 PAGE 10 OF 25

Page 29

4 2 1

32" uGHT BLUE |G 1 443vp0 yellowred | » ack 5 |] QI! To Light Ring velowbiue] 4 | | 5 bata Harness ellow/violet SPINPLUG #2173 To Light Ring SOLID PIN #21008, Extention Harness

penp|| 1[BLACK
Doata|| >[yellowibiue

Pend | | 3 [Pack

ciKki]| 4ietaiad ;

aitcn | | 4 [yelowiviote

Ponp|| 6[BLACK

LIGHT BLUE +13voc] | 8 + t3vDc |_| 9 [LICHT BLUE 9 PIN PLUG #2092 SPLIT PIN #2100 32" uichT BLUE TG 14 s1avp0 A rock 1 To Light Ring a oon Harness auack |e | | Bunt SPINPLUG #2173 SOLID PIN #21008,

QTY | 1} PER GAME TITLE Wheel Of Fortune

DESCRIPTION # WF2050AX - LIGHT RING HARNESS FILENAME © WFREV2.VSD

DRAWNBY = MMARTIN

DATE 2/29/00 REVISED 5/4/01 PAGE 11 OF 25

Page 30

4 2 1

To Mainboard Ps . P8 70

Ponp| | 4[BLACKBLACK[TTR Gx
poara|| 2[yellow/blueyellowiblue|9 | FAP.
PGND | | 3[blackblack | 3 | PONE
cLK1|| 4[yellowedyellowired|9 | FGM*Po.hatn Bi
BiTcH|| 5|yellowivioletyellowiviolet]$ | ett© LightRing
PonD| | ¢[BLACKBLACK]8 | SLTCHHarness
KeY|| 7 [Sehr piueLiGHT BLUE | 7
+1avoc]| 8a | + 13vDc
+413vpc | | 9[LIGHT BLUEHIGHT BLUE | 9 | + 13vDc

9PIN pu 42260 9 PIN CAP #2551 LIT PIN #21 FEMALE PIN #2102 PIN 7: KEY PLUG #2549 MEP

QTY | 1 PER GAME Time Wheel Of Fortune FILENAME — WFREV2.VSD pescriprion # WF2050X - LIGHT RING EXTENTION HARNESS DRAWN8Y — MMARTIN DATE 2/29/00 REVISED 6/13/01 PAGE 12 OF 25 4 2 1

Page 31

4 2 4

P7 .

Ponp|| 1[BLACKBLACK[7 | p GND
PGnp|| 2[BLACKBLACK | g|p GND

+12UVDC 3 ORANGE/BLACK ORANGEIBLACK | 4 | 442uvoc

pata]| 54i

Pr +12uvbc | | 6 -ORANGE/BLACK ORANGEPBLACK | > | s12uvpc Display PCB

DGND|| 7 | BLACKMWHITEBLACKMWHITE | §|p GND
BLTCH|| g[brown/areenbrown/green | 5 | BLTCH
cuks|| 9[brown/biue

9 PIN PLUG #2282 8 PIN HOUSING #2405 SPLIT PIN #2100 * Start Spiral Wrap (# 8069) 34" From 9-Pin Plug WITH AMP CONTACT #2201 PIN 4: KEY PLUG #2549 Cut Spiral Wrap 26" To Cover 18" Of Harness OnANGEBLAcK (4 | + 42uvie ORANGE/BLACK | 2 | + 12UVDC brownlblue | 3 | CLK5 brown/red | 4 | DDATA brownlgreen | 5 | BLTCH BLACKMHITE | 6 | D GND BLACK | 7 | BLACK BLACK | g | BLACK

QTY | 1]| PER GAME TITLE Wheel Of Fortune

DESCRIPTION #WF2051X - MARQUEE HARNESS FILENAME WFREV2.VSD DRAWN BY MMARTIN DATE 2/29/00 REVISED 6/13/01 PAGE 13 OF 25

Page 32

4 3 2 1

P9 aa =]

wsHort (-] 11Lutite/reswhitefred[GFRsHorr

2 [whiterara a ToMainboard wione| | 3 [white/brown white/brown | 3

aBLACK/WHITE + black/whiteBLACKMWHITEweeTo Wheel
P9-DGND|| 44|DGNDSensor Harness
+12v0c | | 5 PORANGETORANGE | 5|+12,voc
WHOME6 |“ ite/orangewhite/orange= | WHOME

6PINPLUG #2173 SOLID PIN #21008, PIN4: 20-14 AWG #8260

whitelaray =) yca0217 6 PIN CAP #2366 FEMALE PIN #2102

To Tilt Sensor blaciiwhite 6 geczoet7

  • Add #2611 - 1/4" Shrink tube (cut at 1 1/2") To each Ring Terminal

QTY |} 1 PER GAME Te Wheel Of Fortune

#WF2052X - TILTWHEELSENSOR EXT.|FILENAME — WFREV2.VSD DESCRIPTION HARNESS DRAWN8Y — MMARTIN

DATE 2/29/00 REVISED 6/13/01 PAGE 14 OF 25

4 3 2 1

Page 33

4 2 1

2a" To Bolt on GREEN/YELLOW rE) 1652 Ticket Dispenser

24" To Station violet/blue Harness BLACK + black { 1) 7 Sense ;

72|PGNDTo Ticket

violetwhite | 3 IT Rin Dp

1 }SREENIVELLOWORANGE + orange]4|, typoSPenser
TUN2 | violevwhite4PINMLXCAP #2158—

violevblue 42" FEMALE PIN #2176 T-EENSE 3 ORANGE PINS 2 & 4: 20-14 AWG FEMALE PIN #8177

OND5 [BLACKapes)4f+ 12vDCRED FLASHING LED #8212

mioletred! 2 |T Out WITH LED HOLDER #1017 SPIN PLUG #8129 SOLID PIN #21008

  • Add 6" of Spiral Wrap (# 8069) 2 PIN MOLEX HOUSING #2089 21" MINI KK PIN #2074

violet/red pay #651 187 To Low Ticket black weg Switch Nie 28"

QTY | 2 PER GAME

TITLE Wheel Of Fortune

FILENAME WFREV2.VSD DESCRIPTION # WF2053X - TICKET DOOR HARNESS DRAWN BY MMARTIN

DATE 2/29/00 REVISED 6/13/01 PAGE 15 OF 25

Page 34

14" ORANGE .250 #653T

MIOLETIBLACK 255) 260 46531

14" black/white 250 e537 To Button +12voc | | 1 ORANGE + 12vDC | | 2 } ORANGE ToClicker Punp| | 4 [BLACK Harness Gnp| | 5 [Plackwhite *2 DData| | 6 [yellow clock | | 7 [vellow/green Button Light| | g [MOLETIBLAGK Button | | 9 [wolevaray

9 PIN PLUG #2292 SPLIT PIN #2100 violevgray 665) 260 HessT To Button Light

14"

black/white 1 [-]D Gnd alia 2 | [EMC to Ticket 3 | |D Data Nip enna BLACK] 4 | Jp GNp Owed Display ORANGE! 5 | |+12vbc aliow/areen| § | | clock

6 PIN PLUG #2173, SOLID PIN #21008

QTY | 2| PER GAME TIME Wheel Of Fortune

DESCRIPTION # WF2054X - Control Panel Harness FILENAME =WFREV2.VSD

DRAWN BY MMARTIN

DATE 2129/00 REVISED 5/3/01 PAGE 16 OF 25

Page 35

3 2 1

  • Fuse Value: 6 Amp #2295 MDQ6

#2OEPOWERMODULE ] yosy CORCOM ( PELSOSSXO) 187

A B cD

4651

To Power Mod ” Faceplate 10) = BROWN #2068 GRAVEL. ; To Transformer ( id BLUE | 3 re 5 3 PIN CAP #2288 44 AWG FEMALE #2013,

BROWN GRNIYEL

iS) To Light Ballast Extention Harness

3 PIN CAP #2288, FEMALE #2102 GRN/VEL To Base Of EO #7020217 Transformer

QTY | 1 PER GAME

TITLE Wheel Of Fortune

pesopipnion # WF2055X - POWER MODULE RLENAME! | WFREV2.VSD HARNESS DRAWNBY — MMARTIN

DATE 2/29/00 REVISED 6/13/01 PAGE 17 OF 25

Page 36

To Cabinet @ GREEN/YELLOW Frame

34 4000

110 =“ To Ticket Reset

black. #650 Buttor ack a #880 utton

P3

Poe1[violet34"GREEN/YELLOW[7]
TRUN | | 2 [vicletiwhitevioletwhite|9 | 7 pun
To Mainboardvioletbluevioletv/blueTo Ticket Door

TSENSE| | 3 3 | T SENSE

P3 ORANGE ORANGE Harness

t2vDC)| 4[BLACK + blackBLACK]4 | 12 VOC

Ponpd |_| 5 5 | PGND ss] 5 PIN PLUG #8129 SPIN CAP #8120 SOLID PIN #21008 PIN 5: 20-14 AWG #8260 FEMALE PIN #2402

QTY |}1) PER GAME

Te Wheel Of Fortune

FILENAME WFREV2.VSD DESCRIPTION # WF2056AX - P1 TICKET DOOR EXT. DRAWNBY = MMARTIN DATE 2/29/00 REVISED 6/13/01 PAGE 18 OF 25

Page 37

RESET BT. i TRUN ta Mainboard a 12 VDC P GND PS

akon To Cabinet Frame

ray/voilet _,— #650 black _, #650 4650 Gp SREENVELLOW

To Ticket Reset Button =

SPIN PLUG #8129 SOLID PIN #2100 48" GREEN/YELLOW [7 7

aray/whitegraylwhite|>
gray/bluegray/blue|3t oeTo Ticket Door
ORANGEORANGE]4 | ip ypc.Harness
BLACK + blackBLACK]5|p GND

=]

5 PIN CAP #8130 PIN 5: 20-14 AWG #8260 FEMALE PIN #2102,

QTY | 1} PER GAME

Time Wheel Of Fortune

FILENAME — WFREV2.VSD DESCRIPTION # WF2056X - P2 TICKET DOOR EXT. DRAWNBY — MMARTIN

DATE2129/00REVISED6/13/01PAGE19 OF 25
Page 38

4 3 2 1

27"

+ 13VDCFyL-LIGHT BLUELIGHT BLUE[7G F#443vp0
ToWheel Motor+ 13vpc|| 2 /LIGHT BLUELIGHT BLUE]9|%13V0C+4 wheel Motor

Extention Harness = WHEEL 3 | BLACK/BLUE BLACKIBLUE | 3 |WHEEL acsembl

WHEEL | | 4 | BLACK/BLUEBLACKIBLUE | 4 | WHEELssembly

as 4PIN PLUG #2099 4PIN CAP #2101 SOLID PIN #21008 FEMALE PIN #2102

QTY 1| PER GAME

TITLE Wheel Of Fortune

# WF2057AX - WHEEL MOTOR PRSNAME WEREV2YSD) DESCRIPTION HARNESS DRAWNEY — MMARTIN DATE 2/29/00 REVISED 5/3/01 PAGE 20 OF 25

Page 39

4 3 2 1

P11 . 68 = LIGHT BLUE LIGHT BLUE + 13VDC dl 1 | 13vDC

To Mainboard — + 13VDC.2 [LIGHT BLUELIGHT BLUE | >/+413VDC+. wheel Mot:
PitWHEEL3 [BLACKIBLUEBLACKIBLUE | 3 | WHEEL‘0WheelMotor
WHEEL|| 4 [BLACK/BLUEBLACK/BLUE | 4 | wee,Harness

a] 4 PIN PLUG #2099 4PIN CAP #2101 SOLID PIN #21008 FEMALE PIN #2102

QTY | 1} PER GAME

Te Wheel Of Fortune

#WF2057X - WHEEL MOTOR EXT. [FILENAME WFREV2.VSD DESCRIPTION HARNESS DRAWN BY MMARTIN

DATE 2/29/00 REVISED 6/13/01 PAGE 21 OF 25

4 3 2

Page 40

4 2 1

  • Strip Back 2" 31" BLACK BLACK gg #881 ACL 1 ell ht Ballast GREEN “ i
Extention HamessEARTHGNO|| 2 tone# 8173 -3 COND. SVTeREEN© wec20217To Light Ballast

acn| | 3 187

  • Strip Back 3" From End
3 PIN PLUG #2206i7

SPIN PLUG #2208 Cut Black & White at 1 1/2’

QTY} 1 PER GAME

TITLE Wheel Of Fortune

# WF2058AX - LIGHT BALLAST POWER|"LENAME _ WFREV2.VSD DESCRIPTION HARNESS: DRAWN BY MMARTIN

DATE2/29/00REVISED6/13/01PAGE22 OF 25

4 2

Page 41

4 2 1

48" = BLACK BLACK | 4 [AcL To Power ACL 1 GREEN GREEN To Light Ballast #8173 - 3 COND. SVT 2 | EARTH GND Module EARTH SND | 2 [WHITE WHITE] 3 | acn Harness

3 PIN CAP #2288, 3 PIN PLUG #2206 FEMALE #2102 SOLID PIN #21008

QTY |}1) PER GAME

Te Wheel Of Fortune

FILENAME ~~ WFREV2.VSD pesoriprion # WF2058X - LIGHT BALLAST POWER EXTENTION HARNESS DRAWNBY MMARTIN

DATE 2/29/00 REVISED 6/13/01 PAGE 23 OF 25

4 2 1

Page 42

3 2 1

To Mainboard Pto 650 P10 13" 110 DoND | 4 | blackiwhite os) LT Pre PRG | 2 [vellow/brown 110 SEL| 3. [vellow/rea 4" step | 4 [yellow/orange \ Hi sev #2561 4PIN IDC #2562 COVER STRAIN RELIEF

i] STEP

QTY 1| PER GAME

TITLE Wheel Of Fortune

DESCRIPTION # WF2059AX - PROGRAMMING BUTTONS HARNESS FILENAME © WFREV2.VSD

DRAWNBY = MMARTIN

DATE 2/29/00 REVISED 6/13/01 PAGE 24 OF 25

Page 43

To Fan PGND black orange P14

+ 12VDC Jerange Sf} orange 8) L445 4 PIN MLX CAP #2158 FEMALE PIN #2176 + 12vDC Pcnp P14

2 PIN AMP HOUSING #2240 AMP CONTACTS #2201 To Mainboard

QTY 1| PER GAME

TITLE Wheel Of Fortune

DESCRIPTION # WF2059X - FAN HARNESS: FILENAME WFREV2.VSD

DRAWN BY MMARTIN

DATE 2/29/00 REVISED 6/13/01 PAGE 25 OF 25

Page 44

Warranty

|.C.E warrants all components in the SUPER CHEXX" game to be free of defects in materials and workmanship for a period of ninety days from the date of purchase.

This warranty does not cover items damaged due to normal wear and tear, subjected to abuse, improperly assembled by the end user, modified, repaired, or operated in a fashion other than that described in the service manual.

If your SUPER CHEXX" game fails to conform to the above-mentioned warranty, |.C.E.'s sole responsibility shall be at its discretion to repair or replace any defective component with a new or remanufactured component of equal to or greater O.E.M. specification.

1.C.E. will assume no liability whatsoever, for costs associated with labor to replace defective parts, or travel time associated therein.

|.C.E.'s obligation will be to ship free of charge, replacement parts by U.P.S. Ground, U.S. mail, or other comparable shipping means. Any express mail or overnight shipping expense is at the cost of the purchaser.

Products will be covered under warranty only when:

The serial number of the game with the defective parts is given.

The serial number of the defective part, if applicable, is given.

Defective parts are returned to I.C.E., shipping pre—paid, in a timely fashion, if requested by I.C.E.

A copy of the sales receipt is available as proof of purchase upon request of I.C.E.

|.C.E. distributors are independent, privately owned and operated. In their judgment, they may sell parts or accessories other than those manufactured by I.C.E. We cannot be responsible for the quality, suitability, or safety of any non-I.C.E. part, or any modification, including labor, which is performed by such a distributor.