CATHODE RAY TOMES

Brave Firefighters Deluxe

Brave Firefighters (Sega, 1999) · Manual · 144 pages · 216 sections · original scan

Page 1

Es

Deluxe Version

Owner’s Manual

is ad f ) ia

SEGA ENTERPRISES, INC. USA MANUAL NO. 4201-6478-01

Page 2

VISIT OUR WEBSITE!

SO sepeservicecom:

Back —_Fervart Refresh

+ Dart's Office «Game Manuals *Seeren oWhet's Now

people have visited this page since 3/16/01

nas etree me Ifyou have any questions or comments p on@: Ba

peep about this site ius E-Mail to Darl Davidson@seu sega com

fax 415.701.0604 i i

THUR WER BUTE POWwENEO BY

WebSTAR 4-3

ie fr

You will need the ek items to view this =a in its entirety

AlPlatforms Windows Macintosh

Page 3

BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: To maintain the safety:

To ensure the safe usage of the product, be sure to read the following before using the product. The following instructions are intended for the users, operators and the personnel in charge of the operation of the product. After carefully reading and sufficiently understanding the warning displays and cautions, handle the product appropriately. Be sure to keep this manual nearby the product or elsewhere convenient for referring to it when necessary.

Herein, explanations which require special attention are enclosed with dual lines. Depending on the potentially hazardous degrees, the terms of WARNING, CAUTION, etc. are used. Be sure to understand the contents of the displays before reading the text.

Indicates that mishandling the Indicates that mishandling the product product by disregarding this by disregarding this caution will cause

warning will cause a potentially a slight hazardous situation which can
WARNING! hazardous situation which can CAUTION! result in personal injury and or material result in death or serious injury. damage.

For the sage usage of the product, the following pictographs are used:

Indicates “HANDLE WITH CARE.” In order to protect the human body an equipment, this display is attached to places where the Owner’s Manual and or Service Manual should be referred to.

© Perform work in accordance with the instructions herein stated. Instructions for work are explained by paying attention to the aspect of accident prevention. Failing to perform work as per the instructions can cause accidents. In the case where only those who have technical expertise should perform the work to avoid hazardous situation, the instructions herein state that the serviceman should perform such work.

© Be sure to turn off power before working on the machine. To prevent electric shock, be sure to turn off power before starting the work in which the worker touches the interior of the product. If the work is to be performed in the power-on status, the Instruction Manual herein always states to that effect.

© Be sure to ground the Earth Terminal (this, however, is not required in the case where a power cord with earth is used). This product is equipped with the Earth Terminal. When installing the product, Connect the Earth Terminal to the “accurately grounded indoor earth terminal” by using an earth wire. Unless the product is grounded appropriately, the user can be subject to electric shock. After performing repair, etc. for the Control equipment, ensure that the Earth Wire is firmly connected to the Control equipment.

© Ensure that the Power Supply used is equipped with an Earth Leakage Breaker. This product does not incorporate the Earth Leakage Breaker. Using a power supply which is not equipped with the Earth Leakage Breaker can cause a fire when earth leakage occurs.

© Be sure to use fuses which meet the specified rating. (only for the machines which use fuses). Using fuses exceeding the specified rating can cause a fire and electric shock.

Page 4

O Specification changes (removal of equipment, conversion and addition) not designated by SEGA are not allowed. The parts of the product include warning labels for safety, covers for personal protection, etc. It is very hazardous to operate the product by removing parts and or modifying the circuits. Should doors, lids and protective parts be damaged or lost, refrain from operating the product, and contact where the product was purchased from or the office herein stated. SEGA shall not be held responsible for any accidents, compensation for damage to a third party, resulting from the specifications not designated by SEGA. ©. Ensure that the product meets the requirements of appropriate Electrical Specifications. Before installing the product, check for Electrical Specifications. SEGA products have a nameplate on which Electrical Specifications are described. Ensure that the product is compatible with the power supply voltage and frequency requirements of the location. Using any Electrical Specifications different from the designated Specifications can cause a fire and electric shock. © _ Install and operate the product in places where appropriate lighting is available, allowing warning labels to be clearly read. To ensure safety for the customers, labels and printed instructions describing potentially hazardous situation are applied to places where accidents can be caused. Ensure that where the product is operated has sufficient lighting allowing the warnings to be read. If any label is peeled off, apply it again immediately. Please place an order with where the product was purchased from or the office herein stated. © When handling the Monitor, be very careful. (Applies only to the product w/monitor.) Some of the monitor (TV) parts are subject to high tension voltage. Even after running off power, some portions are still subject to high tension voltage sometimes. Monitor repair and replacement should be performed only be those technical personnel who have knowledge of electricity and technical expertise. © Besure to adjust the monitor (projector) properly. (Applies only to the product w/monitor.) Do not operate the product leaving on-screen flickering or blurring as it is. Using the product with the monitor not properly adjusted may cause dizziness or a headache to an operator, a player, or the customers. © _ When transporting or reselling this product, be sure to attach this manual to the product. In the case where commercially available monitors and printers are used in this product, only the contents relating to this product are explained herein. Some commercially available equipment has functions and reactions not stated in this manual. Read this manual together with the specific Instruction Manual of such equipment.

° Descriptions herein contained may be subject to improvement changes without notice. ¢ The contents described herein are fully prepared with due care. However, should any question arise or errors be found, please contact SEGA.

INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION.

Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately after transporting to the location. Nevertheless, an irregular situation may occur during transportation. Before turning on power, check the following points to ensure that the product has been transported in a satisfactory status. Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet? Are Casters and Adjusters, damaged? Do the power supply voltage and frequency requirements meet with those of the location? Are all wiring connectors correctly and securely connected? Unless connected in the correct direction, connector connections can not be made accurately. Do not insert connectors forcibly. Do power cords have cuts and dents? Do the fuses used meet specified rating? Is the Circuit Protector in an energized status? Are all accessories available? Can all Doors and Lids be opened with the Accessory keys? Can Doors and Lids be firmly closed?

Page 5

TABLE OF CONTENTS

BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: TABLE OF CONTENTS

INTRODUCTION OF THE OWNER’S MANUAL

HANDLING PRECAUTIONS .....

PRECAUTIONS CONCERNING INSTALLATION LOCATION

OPERATION .....

NAME OF PARTS

ACCESSORIES

ASSEMBLING AND INSTALLATION

PRECAUTIONS TO BE HEEDED WHEN MOVING THE MACHINE

CONTENTS OF GAME cee

EXPLANATION OF TEST AND DATA DISPLAY .

9-1 SWITCH UNIT AND COIN METER ...

9-2 SYSTEM TEST MODE

9-3 GAME TEST MODE

  • NOZZLE CONTROLLER.... PRPANAMWPYWNE

10-1 REMOVING THE SECURITY WIRE 63-66

10-2 REMOVING THE ASSY SENSOR. 67-70

10-3 REMOVING THE NOZZLE CONTROLLER. 71-84

10-4 DISASSEMBLING THE NOZZLE CONTROLLER..

  • COIN SELECTOR
  • PROJECTOR.

12-1 CLEANING THE SCREEN

12-2 ADJUSTMENT OF TOSHIBA PROJECTO!

12-3 ADJUSTMENT OF MITSUBISHI PROJECTOR.

  • REPLACING THE FLOURESCENT LAMP, AND LAMPS ..
  • PERIODIC INSPECTION TABLE
  • TROUBLESHOOTING ...
  • GAME BOARD eee

16 - 1 REMOVING THE GAME BOARD

16-2 COMPOSITION OF GAME BOARD

  • DESIGN RELATED PARTS ....
  • PARTS LIST ....
  • WIRE COLOR CODE TABE
  • WIRING DIAGRAM .....
Page 6

SPECIFICATIONS Installation Space : 1,290 mm (W) X 1720 mm (D) (50.8 in. X 67.7 in.) Height : 2,190 mm (86.2 in.) Weight : APPROX. 295 kg. (650.4 lbs.) Power, maximum current :491 W 5.47 A (AC 110V 50 Hz AREA) 485 W 5.43 A (AC 110V 60 Hz AREA) 466 W 4.82 A (AC 120V 60 Hz AREA) 489 W 2.82 A (AC 220V 50 Hz AREA) 507 W 2.89 A (AC 220V 60 Hz AREA) 515 W 2.80 A (AC 230V 50 Hz AREA) 464 W 2.55 A (AC 230V 60 Hz AREA) 470 W 2.48 A (AC 240V 50 Hz AREA) 470 W 2.44 A (AC 240V 60 Hz AREA) For TAIWAN (TOSHIBA POJECTION DISPLAY TYPE) Power, current : 530 W 5.20 A (MAX.) 330 W 3.60 A (MIN.) For TAIWAN (MITSUBISHI POJECTION DISPLAY TYPE) Power, current : 530 W 5.50 A (MAX.) 320 W 3.40 A (MIN.) MONITOR : 50 INCH COLOR MONITOR,

INTRODUCTION OF THE OWNERS MANUAL

This Owner's Manual is intended to provide detailed descriptions together with all the necessary information covering the general operation of electronic assemblies, electromechanicals, servicing control, spare parts, etc. as regards the product, BRAVE FIREFIGHTERS DX TYPE. This manual is intended for the owners, personnel and managers in charge of operation of the product. Operate the product after carefully reading and sufficiently understanding the instructions. If the product fails to function satisfactorily, nontechnical personnel should under no circumstances touch the internal system. Please contact where the product was purchased from.

Use of this product is unlikely to cause physical injuries or damages to property. However, where special attention is required this is indicated by a thick line, the word "IMPORTANT" and its sign in this manual.

Indicates that mishandling the product by disregarding this display can cause the product's intrinsic performance not to be obtained, resulting in malfunctioning.

MPORTANT

SEGA ENTERPRISES, INC. (U.S.A.)/CUSTOMER SERVICE 45133 Industrial Drive, Fremont, California 94538, U.S.A. Phone : (415) 701-6580 Fax : (415) 701-6594

Page 7

DEFINITION OF LOCATION MAINTENANCE MAN AND SERVICEMAN

WARNING! Non-technical personnel who do not have technical knowledge and expertise should refrain from performing such work that this manual requires the location's maintenance man or a serviceman to carry out, or work which is not explained in this manual. Failing to comply with this instruction can cause a severe accident such as electric shock.

Ensure that parts replacement, servicing & inspections, and troubleshooting are performed by the location's maintenance man or the serviceman. It is instructed herein that particularly hazardous work should be performed by the serviceman who has technical expertise and knowledge.

The location's maintenance man and serviceman are herein defined as follows:

"Location's Maintenance Man" : Those who have experience in the maintenance of amusement equipment and vending machines, etc., and also participate in the servicing and control of the equipment through such routine work as equipment assembly and installation, servicing and inspections, replacement of units and consumables, etc. within the Amusement Facilities and or locations under the management of the Owner and Owner's Operators of the product.

Activities of Location's Maintenance Man : Assembly & installation, servicing & inspections, and replacement of units & consumables as regards amusement equipment, vending machines, etc.

Serviceman : Those who participate in the designing, manufacturing, inspections and maintenance service of the equipment at an amusement equipment manufacturer. Those who have technical expertise equivalent to that of technical high school graduates as regards electricity, electronics and or mechanical engineering, and daily take part in the servicing & control and repair of amusement equipment.

Serviceman's Activities : Assembly & installation and repair & adjustments of electrical, electronic and mechanical parts of amusement equipment and vending machines.

LISTED

5K92 ®

AMUSEMENT MACHINE

Page 8
  • HANDLING PRECAUTIONS

A

WARNING!

S

IMPORTANT When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that the player can enjoy the game safely. Non-compliance with the following points or inappropriate handling running counter to the cautionary matters herein stated can cause personal injury or damage to the machine.

Before performing work, be sure to turn power off. Performing the work without turning power off can cause an electric shock or short circuit. In the case work should be performed in the status of power on, this manual always states to that effect. To avoid electric shock or short circuit, do not plug in or unplug quickly. To avoid electric shock, do not plug in or unplug with a wet hand. Do not expose Power Cords and Earth Wires on the surface, (floor, passage, etc.). If exposed, the Power Cords and Earth Wires are susceptible to damage. Damaged cords and wires can cause electric shock or short circuit.

To avoid causing a fire or electric shock, do not put things on or damage

Power Cords. When or after installing the product, do not unnecessarily pull the power cord. f damaged, the power cord can cause a fire or electric shock. n case the power cord is damaged, ask for replacement through where the product was purchased from or the office herein stated. Using the cord as is damaged can cause fire, electric shock or leakage. Be sure to perform grounding appropriately. Inappropriate grounding can cause an electric shock. Be sure to use fuses meeting specified rating. Using fuses exceeding the specified rating can cause a fire or electric shock. Completely make connector connections for IC BD and others. Insufficient insertion can cause an electric shock.

To avoid causing a fire or electric shock, do not make Specification changes

y removing, converting and making additions unless otherwise designated by SEGA. Be sure to perform periodic maintenance inspections herein stated.

For the IC board circuit inspections, only the logic tester is allowed. The use ofa multiple-purpose tester is not permitted, so be careful in this regard. The Projector is employed for this machine. The Projector's screen is susceptible to damage, therefore, be very careful when cleaning the screen. For details, refer to PROJECTOR.

Page 9
  • PRECAUTIONS CONCERNING INSTALLATION

LOCATION

This product is an indoor game machine. Do not install it outside. Even indoors, avoid installing in places mentioned below so as not to cause a fire, electric shock,

WARNING! injury and or malfunctioning. @ Places subject to rain or water leakage, or places subject to high humidity in the proximity of an indoor swimming pool and or shower, etc. @ Places subject to direct sunlight, or places subject to high temperatures in the proximity of heating units, etc. Places filled with inflammable gas or vicinity of highly inflammable/volatile chemicals or hazardous matter. Dusty places. Sloped surfaces. Places subject to any type of violent impact. Vicinity of anti-disaster facilities such as fire exits and fire extinguishers. The operating (ambient) temperature range is from 5° C to 40° C. Only in the case a projector is employed, the temperature range is from 5° Cto 30°C.

LIMITATIONS OF USAGE REQUIREMENTS

Be sure to check the Electrical Specifications. Ensure that this product is compatible with the location's power supply,

WARNING! voltage and frequency requirements. A plate describing Electrical Specifications is attached to the product.

Non-compliance with the Electric Specifications can cause a fire and electric This product requires the Breaker and Earth Mechanisms as part of the location facilities. Using them in a manner not independent can cause a fire

shock.

and electric shock. Ensure that the indoor wiring for the power supply is rated at 15A or higher (AC single phase 100 ~ 120V area), and 7A or higher (AC 220 ~ 240V area).

Non-compliance with the Electrical Specifications can cause a fire and

electric shock. Be sure to independently use the power supply equipped with the Earth Leakage Breaker. Using a power supply without the Earth Leakage Breaker can cause an outbreak of fire when earth leakage occurs. Putting many loads on one electrical outlet can cause generation of heat and a fire resulting from overload. When using an extension cord, ensure that the cord is rated at 15A or higher (AC 100 ~ 120V area) and 7A or higher (AC 220 ~ 240V area). Using a cord rated lower than the specified rating can cause a fire and electric shock.

Page 10

Electric current consumption

MAX. 5.47 A (AC 110V 50 Hz) MAX. 5.43 A (AC 110V 60 Hz) MAX. 4.82 A (AC 120V 60 Hz) MAX. 2.82 A (AC 220V 50 Hz) MAX. 2.89 A (AC 220V 60 Hz) MAX. 2.80 A (AC 230V 50 Hz) MAX. 2.55 A (AC 230V 60 Hz) MAX. 2.48 A (AC 240V 50 Hz) MAX. 2.44 A (AC 240V 60 Hz)

MAX. 5.20 A (For TAIWAN, TOSHIBA projection display)

MAX. 5.50 A (For TAIWAN,MITSUBISHI projection display)

@ For transporting the machine into the location's building, the minimum

necessary dimensions of the opening (of doors, ete.) are 1.3m(W) and

1.6m(H).

IMPORTANT, For the operation of this machine, secure a minimum area of 1.5m (W) X 2.5m (D). For ventilation, provide an approximately 10cm. space between the rear part of the cabinet and the wall.

Y

A Approx.10em= 30.4 in

a &

a Approx. 10cm= 39.4 in

yi Ys Le >| 1.5m=59.1 in

FIG. 2

Page 11
  • OPERATION

PRECAUTIONS TO BE HEEDED BEFORE STARTING THE OPERATION

To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of the visitors and players.

In order to avoid accidents, check the following before starting the operation: @ Check if all of the adjusters are in contact with the surface. If they are not, the

WARNING! Cabinet can move and cause an accident.

nsure that all of the Adjusters are in contact with the floor.

Do not put any heavy item on this product. Placing any heavy item on the product can cause a falling down accident or parts damage. Do not climb on the product. Climbing on the product can cause falling down accidents. To check the top portion of the product, use a step. To avoid electric shock, check to see if door & cover parts are damaged or omitted. To avoid electric shock, short circuit and or parts damage, do not put the following items on or in the periphery of the product. Flower vases, flowerpots, cups, water tanks, cosmetics, and receptacles/ containers/vessels containing chemicals and water.

Page 12

The Security Wire is an

important accident

CAUTION! preventative part. If

damaged, immediately replace the Security Wire. Using the Wire as is damaged for operation can cause personal injury.

To avoid injury, be sure to provide sufficient space by considering the potentially crowded situation at the installation location. Insufficient installation space can cause the customers to come into contact with or hit the others and result in injury or trouble.

UTIONS TO BE HEEDED DURING OPERATION ( PAYING ATTENTION TO CUSTOMERS ).

To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of the visitors and players.

To avoid injury and accidents, those who fall under the following categories are not allowed to play the game.

WARNING! Those who need assistance such as the use of an apparatus when walking. Those who have high blood pressure or a heart problem. Those who have experienced muscle convulsion or loss of consciousness when playing video game, etc. Those who have a trouble in the neck and or spinal cord. Intoxicated persons. Pregnant women or those who are in the likelihood of pregnancy. Persons susceptible to motion sickness. Persons whose act runs counter to the product's warning displays. To avoid injury resulting from falling down, and electric shock due to spilled drinks, instruct the player not to place heavy items or drinks on the product. To avoid electric shock and short circuit, do not allow customers to put hands and fingers or extraneous matter in the openings of the product or small openings in or around the doors. To avoid falling down and injury resulting from falling down, immediately stop the customer's leaning against or climbing on the product, etc. To avoid electric shock and short circuit, do not allow the customers to unplug the power plug without a justifiable reason.
Page 13

AY @ Caution the guardians of small

children to watch them. Small

WARNING! children are unable to perceive

hazards. Use care so that they do not come close to the product when in play so as to avoid making contact with, bumping against the machine or players, and tumbling over accidents.

Instruct the players so as not to wind the Security Wire for Nozzle Controller around his neck or wrists. Failure to observe this may cause a serious injury accident.

Page 14

@ Instruct the player(s) to securely hold Nozzle Controller when playing the game. Instruct the player(s) to

CAUTION! suspend strap from his shoulder as

much as possible. The Nozzle Controller weighs approximately 1.8Kg and sways during game play.

Dropping Nozzle Controller can

cause the player(s) or other people to be injured.

Caution the player(s) so as not to brandish the Nozzle Controller. Hitting other people by Nozzle Controller can cause an injury.

@ Instruct the player(s) to be careful not to have fingers pinched in when returning the Nozzle Controller to its position.

Page 15

A\ @ Instruct the person(s) who has a disorder with hands or arms to refrain from playing the game by explaining that playing the game may cause the

CAUTION! worsening of his condition.

@ Caution the player(s) so as not to hold a Nozzle Controller by 2 or more Players to play the game. Failure to observe this may cause collisions or near collisions.

@ Immediately stop such violent acts as hitting and kicking the product. Such violent acts can cause parts damage or falling down, resulting in injury due to fragments and falling down.

Page 16
  • NAME OF PARTS

BILLBOARD

PROJECTOR PTV _ a ~ a ~ 4

2P 7

IP SIDE CONTROLLER 2P SIDE CONTROLLER

PTV CABINET

/ / CASHBOX poor/, \COIN CHUTE DOOR

FIG. 4 OVERVIEW

TABLE 4

Width Xx Length X Height Weight

PROJECTOR 44.9” [1,140mm] X 20.9” [530mm] X 62.2” [1,580mm] | 200.2 Ibs (91 kg) BILLBOARD 44.9” [1.140 mm] X 20.9” [530mm] X 13.4” (340 mm] 61.6 lbs (28 kg) PTV CABINET 44.9” [1.140 mm] X 33.5” [850mm] X 37.0” [940 mm] 160.6 lbs (73 kg) CONTROL CABI 51.2” [1,300 mm] X 41.7” [1,060 mm] X 43.7” [1,110 mm] | 178.2 Ibs (81 kg) When assembled 51.2” [1,300 mm] X 67.7” [1,720mm] X 86.2” [2,190mm] | 649.0 Ibs (295 kg)

Page 17
  • ACCESSORIES

When transporting the machine, make sure that the following parts are supplied.

TABLE 5 ACCESSORIES

DESCRIPTION Part No. (Qty.)

Note OWNERS MANUAL 420-6478-01 (1)

Figures If Part No. has no description, the Number has not been registered or can not be registered. Such a part may not be obtainable even if the customer desires to purchase it. Therefore, ensure that the part is in safekeeping with you. KEY MASTER 220-5576 (2) For opening/closing the doors KEY 2) For the CASHBOX DOOR

AC Cable (Power Cord) 600-6729 (1) AC 110V AREA 600-6695 (1) AC 120V AREA 600-6618 (1) AC 220 ~ 240V AREA Used for installation, see 4 of Section 6.

TOSHIBA Remote Control for Projector Used for adjustment. See Section 12. 200-5536(1)

One of the above 2 types of Remote Controls is used for the Projector. CORD CLAMP 280-5009-01 (1) Used for securing the power cord. see 4 of Section 6.

MITSUBISHI Remote Control for Projector Used for adjustment. See Section 12. 200-5532(1)

Page 18

LAMP 6V 3W LAMP 120V 40W 390-5160 (1) 390-6648 (2) Spare, see Section 13. Spare, see Section 13.

CARTON BOX 601-10642 (1) Used for transporting the Game Board. Refer to Next Page.

Page 19

HOW TO USE THE CARTON BOX

@ When asking for the replacement or repair of the product's Game Board (SEGA HIKARU), be sure to put the Game Board together with the Shield Case in a Carton Box. Otherwise, the request is not acceptable. Put the Shield Case in the Carton Box by paying attention to the correct direction as per the following instructions and as shown by the instructions

IMPORTANT

printed on the Carton Box. Handling in an erroneous manner can damage the Game Board. Remove the Shield Case Brackets from the Shield Case and put the Shield Case in the Carton Box.

SHIELD CASE BRACKETS The shape depends on the type of product. "CHECK SIDE" Display

FILTER BOARD

Wrap the Shield Case with the packing material and put it in the Carton Box as shown. Putting it upside down or packing otherwise in the manner not shown can damage the Game Board and parts.

Page 20
  • ASSEMBLING AND INSTALLATION
WARNING! Perform assembly work by following the procedure herein stated. Failing to comply with the instructions can cause electric shock hazard. Assembling should be performed as per this manual. Since this is a complex machine, erroneous assembling can cause an electric shock, machine damage and or not functioning as per specified performance. When assembling, be sure to use plural persons. Depending on the assembly work, there are some cases in which working by one person alone can cause personal injury or parts damage. Perform connector connection securely. Insufficient insertion can cause electric shock and short circuit hazards. This work should be performed by the Location's Maintenance Man or Serviceman. Working by those who do not have technical expertise can cause such severe accidents as electric shock. Failing to perform work in accordance with the explanations given in this manual can cause such severe accidents as electric shock to the player during operation. Be careful so as not to damage wiring. Damaged wiring can cause electric shock and short circuit hazards.

When carrying out the assembling and installation, follow the following 6-item sequence.

] [ea] [XJ [ea] [So [A

The master key (ace: ASSEMBLING THE PTV

ASSEMBLING THE CABINET

SECURING IN PLACE (ADJUSTER ADJUSTMENT)

POWER SUPPLY, AND EARTH CONNECTION

TURNING POWER ON

ASSEMBLY CHECK

ssories) in addition to the tools such as a Phillips type screwdriver, wrench for M16 hexagon bolt, socket wrench for M8 hexagon bolt, Ratchet Handle are required for the assembly work.

Phillips type screwdriver 24mm,

SOCKET WRENCH (for M8 hexagon bolt) RATCHET HANDLE KEY MASTER

Page 21
CAUTION! ASSEMBLING THE PTV

To perform work safely and securely, be sure to prepare a step which is in a secure and stable condition. Performing work without using the step can cause violent falling down accidents.

® By using 2 Flat Head screws, secure the 2 Mask Bracket Uppers to the PTV ceiling.

@ Secure the Mask Bracket Lower to the front of PTV with 4 screws.

FLAT HEAD SCREW (2 each) peo

MASK BRACKET UPPER

MASK BRACKET LOWER

RK

\ TRUSS SCREW (4) MS X 20

FIG. 6.1a

Page 22

® Install the Mask to the PTV

front. Install the Mask in a manner hooking up to both 2 Mask Bracket Uppers and the Mask Bracket Lower. Simultaneously insert the projections of the Mask into the square holes in the PTV Screen left and right. TRUSS SCREW (2) MS flat washet

® Secure the Mask by

fastening a screw for each from both sides of PTV.

® Connect 2 Wire Connectors

of the Billboard to the PTV ceiling. At this time, connect the Connectors with using a step while another 2 persons supporting the BILLBOARD for performing work safely.

© Mount the BILLBOARD onto the PTV and

move the BILLBOARD to the PTV screen HG, 6.1

direction while hooking up the Billboard to the 2 Mask Bracket Uppers. Be careful so as not to damage the wiring at this time.

@ Secure the BILLBOARD with 2 screws. SCREW (2)

MS X 16,w/flat & spring washers NN MN

Connect the Connector

When performing work, FIG. 6.1¢ prepare a step.

Page 23

2] ASSEMBLING THE CABINET

i

\ TRUSS SCREW (2) M4 X 20

Take out 2 screws from the

PTV Cabinet and unlock the lock to remove the Upper Lid.

FIG. 6.2a

@ Take out 2 screws from the

PTV Cabinet to remove the Lower Lid. SCREW (2)

/ LOWER LID/

FIG. 6.2b

Page 24

® Move the PTV to the rear of the PTV

Cabinet.

® Connect the wiring between the PTV

and PTV Cabinet.

© Mount PTV on the PTV Cabinet. Lift

the PTV by 3 or more persons while another person supporting the PTV Cabinet so as not to cause the Cabinet to move. At this time, use care so as not to damage the wiring.

© Secure the joint portion of PTV and > a the PTV Cabinet with 4 screws. ! | —

Perform wiring connection.

TRUSS SCREW ( MS X 30,flat was

FIG. 6.2 ¢

For performing work, use 4 or more workers.

Page 25

@ Take out 6 screws from the Control Cabi to remove Center Lid.

® Insert the Control Cabi into the square hole in the PTV Cabinet. At this time, be careful so as not to damage the wiring.

(©) Fasten 4 Hexagon bolts to the bottom base of PTV Cabinet to secure the joint of PTV Cabinet and Control Cabi.

Secure Joint Bracket L&R to the both sides of Cabinet's joint portion with 4 Hexagon Bolts for each. The length of Bolts used for Control Cabi and for PTV Cabinet differ. Be very careful of this point.

TRUSS SCREW (6) g

CS) $ “HEXAGON BOLT (4) ng washer, flat washer used.

} JOINT BRACKET R (OPPOSITE SIDE) JOINT BRACKET L

PTV CABINET

/ / HEXAGON BOLT (2 eacty/ MB X 20,w/spring washer, flat washer used. L CENTER LID

CONTROL CABI M8 X 4 ng washer, flat washer used.

FIG. 6.2d

Page 26

@ Connect 2 Connectors inside the Center Lid.

® Secure the Earth terminal to the bottom base of the Cabinet inside the Center Lid with a screw.

® Secure the Center Lid to its original position. At this time, install Information Plate by using the 2 screws of the PTV cabinet side which secure the Center Lid.

TRUSS SCREW (6) M4 X 12 \

INFORMATION PLATE

CENTER LID

Connect the Connectors.

Connect the Earth. SCREW (1) M4 X 8,w/flat & spring washers

FIG. 6.2¢

(©) Install in order of Lower Lid and Upper Lid to the PTV Cabinet.

Page 27

J SECURING IN PLACE (ADJUSTER ADJUSTMENT)

Make sure that all of the adjusters ar ontact with the floor. If they are n cabinet can move and cause an accident.

WARNING!

O®his product has 8 casters (4 for PTV Cabinet, 4 for CONTROL CABI) and 11 Adjus

(4 for PTV Cabinet, 7 for CONTROL CABI). (FIG. 6. 3a) When the installation position is determined, cause the adjusters to come into contact with the floor directly, make adjustments in a manner so that the casters will be raised approximately 5mm. from the floor and make sure that the machine position is level. Transport the product to the ADJUSTER installation position. When installing the product near the wall, be sure to secure the passage space to allow player to get in the machine.

@ Have all of the Adjusters make

contact with the floor. Adjust the Adjuster's height by using a wrench so that the machine position is kept level.

After making adjustment, fasten the Adjuster Nut upward and secure the height of Adjuster (FIG. 6.3 b).

CASTER

FIG. 6.3 a BOTTOM VIEW

ADJUSTER

Uf

CASTER

a 0

  • \ aps TER

FIG. 6.3 b ADJUSTER Approx.Smm

Page 28

® Secure 2 Guard Brackets with 2 screws for each.

GUARD BRACKET

TRUSS SCREW (2 each)\ FLOOR M4 X 12,large washers used FIG. 6.3¢

10cm

FIG. 6.3d Refer to this Fig. (Scale: 1/100) FIG.6.3¢ for the layout of the place of Provide ventilation space for the ventilation opening. installation,

Page 29

Z| POWER SUPPLY, AND EARTH CONNECTION

Earth Leakage Breaker. Using a power supply without an Earth Leakage Breaker can cause a fire when electric leakage occurs. Ensure that the "accurately grounded indoor earth terminal" and the earth wire cable are available (except in the case where a power cord plug with earth is used). This product is equipped with the earth terminal. Connect the earth terminal and the indoor earth terminal with the prepared cable. If the

  • @ Be sure to independently use the power supply socket outlet equipped with an
WARNING!

grounding work is not performed appropriately, customers can be subjected to an electric shock, and the product's functioning may not be stable. Ensure that the power cord and earth wire are not exposed on the surface (passage, etc.). If exposed, they can be caught and are susceptible to damage. If damaged, the cord and wire can cause electric shock and short circuit accidents. Ensure that the wiring position is not in the customer's passage way or the wiring has protective covering.

The AC Unit is located on one side of PTV Cabinet. The AC Unit has Main SW, Earth Terminal and the Inlet which connects the Power Cord.

@ Ensure that the Main SW is OFF. la 5

  • (e)

BAA EARTH TERMINAL

Connect with the indoor earth terminal.

Main SW off

AC Cable (Power Cord)

Pais

To the Power Supply Socket outlet

FIG. 6.4a AC unit S

Page 30

® Connect one end of the earth wire to

the AC Unit earth terminal, and the other end to the indoor earth terminal. The AC Unit earth terminal has a Bolt

and Nut combination. Take off the

Nut, pass the end of earth wire

through the Bolt, and fasten the Nut.

Note that the Earth Wire is incorporated in the Power Cord for the Areas of AC 120V (USA) and AC 220 ~ 240V, and therefore, this FIG. 6.4b Earth Wire Connection procedure is not necessary. Connect the Earth Wire to the Earth Terminal.

® Firmly insert the power plug into

the socket outlet. Insert the opposite side of Power Cord plug to the AC Unit's connector ("INLET").

® Perform wiring for the Power Cord

and Earth Wire. Install protective covering for the Power Cord and Earth Wire.

Wiring Cover oS

FIG. 6.4 ¢ Connecting Power Cord and Earth Wire

In case the Power Plug is apt to come out of place, secure

the Power Cord to the periphery of the AC Unit with the Cord Clamp (an accessory).

HOW TO USE THE CORD CLAMP

Page 31

5 TURNING POWER ON

Turn the AC Unit Main SW ON to turn on power. When the power is turned on, the fluorescent lamp inside the BILLBOARD lights up. The 2 Revolving lamps light up and turns round only during the game play. The screen displays the System Starting mode for a while and then proceeds to the ADVERTISE mode. Simultaneously at this time, sound is emitted from the 2 Speakers. If NO SOUND OUTPUT is set, sound is not emitted during the ADVERTISE. In this product, turning power off does not clear the data such as the number of credits, Ranking, and the latest point. Therefore, if power is turned on again after turning it off when play worth credits are remaining, the game start screen is displayed on the monitor and the start buttons flash.

Fluorescent lamp is lit,

Page 32

THE INTERFERENCE PREVENTION WIRING

WARNING!

Work should be performed by In order to prevent electric shock and short circuit hazards, be sure to turn power off before performing work. Be careful so as not to damage wirings. Damaged wiring can cause fire, electric shock and short circuit hazards. Do not expose the IC BD, ete. can cause electric shock hazard or malfunctioning.

personnel. Performing work by those who do not have technical knowledge and expertise can cause electric shock accident or malfunctioning. without a good reason. Failure to observe this

the Location's Maintenance Man or technical

When the identical machines are put side by side, the machines might malfunction due to the interference of the Sight Sensor. To prevent interference, disconnect the Interference Prevention Wiring from the Gun Sensor BD in either one of the 2 machines put as per the following procedures. In case 3 or more identical machines are put side by side, use the Wiring on every other machine. Further, the interference might occur on the cabinet which uses the same type of the Sight Sensor such as The House of the Dead 2, etc.

® Turn off the Cabinet's power.

Take out 6 Truss screws to remove the Center Lid and the Information Plate.

Disconnect the Interference Prevention Wiring from the Gun Sensor BD inside the Lid. TRUSS SCREW (6) /M4X 12 INFORMATION PLATE

GUN SENSOR BD

[INTERFERENCE PREVENTION WIRING, HOD-60040

Page 33

6 ASSEMBLING CHECK

In the TEST MODE, ensure that the assembly has been made correctly and IC BD. is satisfactory (refer to Section 9). In the test mode, perform the following test:

  • MEMORY TEST

RAM TEST

IC15 1C22 1C28 Ic41 1c42 C44 IC45S IC46 IC47S IC91S IC92S C98 IC16 IC17SIC18S GOOD 1C23 1C24S IC25S GOOD IC29S GOOD GOOD GOOD GOOD GOOD GOOD

PRESS TEST BUTTON TO EXIT

  • C.R.T. TEST

C.R.T. TEST PAGE#1

RED

GREEN

BLUE

WHITE

PRESS SERVICE BUTTON TO ANOTHER PAGE PRESS TEST BUTTON TO EXIT

[PRESS SERVICE BUTTON TO ANOTHER PAGE| PRESS TEST BUTTON TO EXIT, 4 Selecting the RAM TEST on the test mode menu screen causes the on-board memory to be tested automatically. The game board is satisfactory if the display beside each IC No. shows GOOD.

In the TEST mode menu, selecting C.R.T. TEST allows the screen (on which the projector is tested) to be displayed. Although the projector adjustments have been made at the time of

shipment from the factory, make judgment as to

whether an adjustment is needed by watching the test mode screen. If it is necessary, adjust the projector by referring to Section 12.

Page 34
  • INPUT TEST

INPUT TEST Selecting the INPUT TEST on the test mode menu screen causes the screen (on

1P WATER [OFF]2P WATER [OFF]which each switch is tested) to be
1P FOG[OFF]2P FOG[OFF]isseachswite
IP START [OFF|2P START[OFF]displayed. Press each switch. ‘Afthe

display beside each switch indicates

1P SIGHT LOCATION2P SIGHT LOCATION"ON."the switch andwiringconnections

[X:00H/Y-00H] [X:00H/Y:00H] te Soe Wain connee 1P OUT OF SCREEN OFF 2P OUT OF SCREEN OFF are satisfactory.

SERVICE [OFF] TEST [OFF]

PRESS TEST & SERVICE BUTTON TO EXIT

  • OUTPUT TEST

OUTPUT TEST The OUTPUT Test menu screen in the TEST mode allows Lamps and wiring 1P START LAMP OFF connections to be checked. Check if 2P START LAMP OFF each lamp lights up satisfactorily.

1P NOZZLE VIBRATION OFF 2P NOZZLE VIBRATION OFF

LEFT REVOLVING LIGHT OFF RIGHT REVOLVING LIGHT OFF

>EXIT

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

  • SOUND TEST

SOUND TEST MENU On the Menu screen in the TEST mode, selecting SOUND TEST causes the screen (on which sound related BD and

apt wiring connections are tested) to be

VOICE displayed. B.G.M. Be sure to check if the sound is satisfactorily emitted from each speaker and the sound volume is appropriate. >EXIT

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

Perform the above inspections also at the time of monthly inspections.

Page 35
  • PRECAUTIONS TO BE HEEDED WHEN MOVING THE MACHINE A
WARNING! When moving the machine, be sure to pull out the plug from the power supply. Moving the machine with the plug as is inserted can cause the power cord to be damaged and could result in a fire and or electric shock. When moving the machine on the floor, retract the Adjusters and ensure that Casters make contact with the floor. During transportation, pay careful attention so that Casters do not tread power cords and earth wires. Damaging the power cords can cause an electric shock and or short circuit. In places where step-like grade differences exist, be sure to separate the PTV, PTV Cabinet, and the Control CABI. Inclining the PTV as is mounted on the PTV Cabinet can cause the PTV to fall off from the Base and result in injury. When lifting the cabinet, be sure to hold the catch portions or bottom part. Lifting the cabinet by holding other portions can damage parts and installation portions due to the empty weight of the cabinet, and cause personal injury. When moving the PTV, do not push it from the rear side. Push it from sideways. Pushing the PTV from the rear side can have the PTV fall down, causing personal injury etc. In case the floor has slanted surfaces or step-like differences, be sure to move the machine by 2 or more persons.

When transporting the product in places with steps or step-like differences in grade, disassemble into each unit before transporting. Le)

Do not push PTV from the back. Pushing the PTV from the back can cause the PTV to fall down. Push it from the side. GRIP

On level surfaces, move the machine by causing the Casters to make contact with the surfaces.

FIG.7

Page 36
  • CONTENTS OF GAME

The following explanations apply to the case the product is functioning satisfactorily. Should there be any moves different from the following contents, some sort of faults may have occurred. Immediately look into the cause of the fault and eliminate the cause thereof to ensure satisfactory operation.

HOW TO PLAY

© Insert a coin(s).

© Insert a coin(s) @) When one play worth of coins is

® After one play worth of coin:

The fluorescent lamp inside the Billboard ESS EA AES

is always lit when the product is energized. During Advertise, the game images and the operating instruction are outputted on the monitor. The Advertise BILLBOARD _ sounds during the Advertise Mode can be PL PV ser set to ON or OFF in the TEST Mode.

START BUTTON inserted, the screen display changes to "PRESS START BUTTON" from "INSERT

COIN(S)." The number of credits

is displayed below the "PRESS START BUTTON." Up to 9 credits can be counted at a time. Coins inserted after counting 9 credits are neither counted as credits nor returned. However, the coin meter functions. COIN Inlet

NOZZLE CONTROLLER \ inserted, the 2 Start Buttons flash. Decide which side to play by pressing the Start Button. Pressing the Start Button causes the credits

to be consumed. The Start Button of the side in play goes

off. The Start Button of the side not in play keeps FIG. 8a

flashing if play worth credits still remain.

® Suspend Nozzle Controller's strap

from your shoulder and securely hold the Controller. Turn the Nozzle Controller to the screen, and the Diffusion SIGHT appears on the screen.

© The Nozzle Controller is equipped with the DRAINAGE Button (Red Button) and the FOG STREAM SW (Rotary Grip). Press the DRAINAGE Button to spray water upon the DRAINAGE SIGHT on the screen. Pressing the DRAINAGE Button causes the motor inside the Controller to work, resulting in the Controller to sway. DRAINAGE Button

\FOG STREAM SW

FIG. 8b

Page 37

©) Twist the FOG STREAM SW for water diffusion. The fog stream is effective for distinguishing a nearby fire and or flying sparks. Normally, the actual fire extinguishing spot is quite a distance from where water is discharged from and the strong water pressure can move or destroy the obstacles.

Standard Discharge Fog Stream

TIME LIMIT

WATER GAUGE \ BONUS TIME

DIFFUSION SIGHT FIG. 8d

@ The time limit is displayed on the upper center of the screen, and the Bonus time is displayed below the time limit. The both time counts down. If the Bonus time remains after the fire is put out, the remaining time will be added to the time limit.

® The WATER GAUGE is displayed next to the time limit of the side in play. Keeping pressing the DRAINAGE Button will drop the water pressure resulting in the flying distance and the power to be weakened. The water pressure will recover by releasing the DRAINAGE Button.

Erroneous extinction can result in time loss, a decrease of Time Limit, due to unexpected leaping fire.

When the Time Limit is near end, the Revolving lamps of Billboard left & right light up and turn round.

@ If the Player succeeds to put out the fire within the Time Limit, he can proceed to the next stage. (®) When you move on with extinguishing a fire within the Time Limit, you will reach the final scene where you must fight against a big flame. The final scene will be cleared if you put out the big flame until the flame's power gauge becomes zero and all fires in the screen.

@vwhen the Time Limit becomes zero, the game is over.

Page 38

The game consists of 3 scenes. The time spent to clear and the score are displayed when each scene is cleared.

® If the Player's score is within the top 10 in rank upon clearing all 3 scenes, he can enter his name. The entered name is displayed during ADVERTISE Mode.

(©) After the Game Over, if one play worth or more credits remain, the screen displays the GAME ENTRY Mode and the START Button flashes. If no credits are left, the START Button remains unlit. Inserting a coin(s) within a certain time period and pressing the START Button enables the player to continue play from that status.

KNACK OF PLAY

© Put out the fire effectively by aiming at fire root! The weak point of fire is the root. Spraying water on the object on fire directly enables you to put out the fire effectively.

O Use FOG STREAM to the close fire!

Fog stream is effective to fight against fire intercepting your sight. Although power is not strong, the sprayed water expands wide and is capable of putting out fire at a breath.

© Use various methods for fire hard to put out!

Various obstacles exist in the place on fire. In order to put out fire beyond the obstacles, move or destroy such obstacles in front of you with the pressure of water discharged. Also, to put out fire hiding behind the objects, using fog stream is effective.

O Predict wide expanding fire and put it out !

Fire spreads out unpredictably quick. Read the way a fire expands ahead of time and spray water to check the spread ofa fire. Put out fire around while checking the spread of a fire.

Page 39
  • EXPLANATION OF TEST AND DATA DISPLAY

By operating the switch unit, periodically perform the tests and data check. When installing the machine initially or collecting cash, or when the machine does not function correctly, perform checking in accordance with the explanations given in this section. The following shows tests and modes that should be utilized as applicable.

SEGA HIKARU GAME BOARD is used for the product. The system of this game board

allows another game to be played by replacing the ROM Board Case mounted on the SEGA. HIKARU CASE. As such, the Test Mode of this system consists of the System Test Mode for

the system to execute SELF-TEST, COIN ASSIGNMENTS, etc. used in common for the

machines employing the SEGA HIKARU BOARD, and the Game Test Mode for the specific product to execute Input/Output test for the operation equipment, difficulty setting, etc.

@ The contents of settings changed in the TEST mode are stored when the test mode is finished from EXIT in the menu mode. If the power is turned off before the TEST mode is finished, the contents of setting change become

IMPORTANT! ineffective. Executing "BACKUP DATA CLEAR" in the SYSTEM TEST MODE does not clear the BOOKKEEPING data in the GAME TEST mode.

Entering the TEST mode clears fractional number of coins less than one credit

and BONUS ADDER data. When performing the SYSTEM TEST Mode, do not turn the Nozzle Controller to the screen. If the Nozzle Controller is turned to the screen, the SYSTEM TEST Mode might be repeated due to reaction of the sensor. (The same applies when turning on the DRAINAGE Button and FOG STREAM SW.)

TABLE 9 EXPLANATION OF TEST MODE REFERENCE ITEMS DESCRIPTION REFERING

INSTALLATION OF | When the machine is installed, perform the following:

MACHINE1. Check to see that each setting is as per standard setting made at the time of9-2 F,G, 9-3 E

shipment,

  • In the INPUT TEST mode, check such input devices as each SW, VR. ete. | 9-2C, 9-3B
3. In the OUTPUTTESTmode, checksuch output devices as lamps, motors, etc. | 9-3 C

4, Inthe SELF-TEST mode, check ICs on the IC Board. 9-2B,J

MEMORYChoose MEMORY TESTin the MENU mode to allow the MEMORY test to be9-2 BJ

performed. In this test, PROGRAM RAMs, ROMs, and ICs on the IC Board are checked.

PERIODIC Periodically perform the following:

SERVICING1. MEMORY TEST9-2 BJ
  • Ascertain each setting. 9-2 FG, 9-3 E
3. In the INPUT TESTmode, test the CONTROL device9.2C,93B
4, Inthe OUTPUTTESTmode, check such output devices as lamps, motors, etc. | 9-3 C
CONTROL1, Inthe INPUTTESTmode, check such input devices as each SW, V-R.,etc.| 9-2, 9-3B
SYSTEM2. Adjust or replace each SW and VR.9-3 F, 10
  • If the problem can not be solved yet, check the CONTROL!s moves.
MONITORIn the MONITOR ADJUSTMENTmode,9-2E

check to see if the PROJECTOR adjustment is appropriately made. 12

IC BOARD1. MEMORY TEST9-2 BJ
2. Inthe SOUND TESTmode, check the sound related ROMs.9-2, 9-3D

DATA CHECK Check such data as game play time and histogram to adjust the difficulty level, etc. | 9-2 H, 9-3 G

Page 40

9-1 SWITCH UNIT AND COIN METER

other than those nd short c

IMPORTANT Adjust to the optimum sound volume by considering the environmental requirements of the installation location.

requirements of the installation location If the COIN METER and the game board are electrically disconnected, game

play is not possible.

shown will appear. The functioning of SWITCH UNIT A rod SERIE TET »

Open the coin chute door, and the switch unit

each SW is as follows: C)

SOUND VOLUM! ST BUTTON

ERVICE BUTTON

FIG. 9. 1 a SWITCH UNIT

TEST BUTTON: For the handling of the test button, refer to the following pages. TEST

SERVICE BUTTON: Gives credits without registering on the coin meter. SERVICE

SOUND VOLUME: Adjusts the sound volume of 2CH. Speaker. SOUND VOLUME

COIN METER

Open the Cashbox Door by using the key to have the Coin Meter appear underneath the Cashbox.

peeeoo) |© ©

COIN METER

FIG. 9. 1b

Page 41

9-2 SYSTEM TEST MODE

A. SYSTEM TEST MODE MENU

Press TEST Button to enter the TEST MODE, and the following Menu screen will be displayed.

SYSTEM MENU @ Press SERVICE Button to move the

X X X X X VERSION arrow (>) to the desired item and select with TEST Button. RAM TEST

@ Bring the arrow to EXIT and press TEST Button to return to the GAME SYSTEM ASSIGNMENTS Mode. COIN ASSIGNMENTS BOOKKEEPING BACKUP DATA CLEAR ROM TEST

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

B. RAM TEST

This allows for checking the functioning of the RAM on the Game BD. In this test, IC's are checked in every row. During the test, "CHECKING" is displayed at the right-hand side of the screen. "BAD" is indicated for irregular RAMs, if any. Upon finishing the test, "PRESS TEST BUTTON TO EXIT" is displayed on the lower center of the monitor. Press TEST Button to return to the MENU screen.

RAM TEST

IC15 IC16 IC17SIC18S GOOD IC22 1C23 I1C24S 1C25S GOOD IC28 I1C29S GOOD ICc41 GOOD C42 GOOD C44 1C45S IC46 IC47S_ GOOD IC91S IC92S GOOD C98 GOOD

PRESS TEST BUTTON TO EXIT

Page 42

C. JVS TEST

NODE 1/1 NAME SEGA ENTERPRISES,LTD.;I/O BD JVS; 837-13551 ;Verl .00;98/10 CMD VER 1.1 JVS VER 2.0 COM VER 1.0 SWITCH 2PLAYERS 13BITS COIN 2SLOTS ANALOG 8CH DRIVER OUT 6CH

SELECT WITH SERVICE BUTTON AN! PRESS TEST BUTTON

JVS TEST > DISPLAY CONFIG EXIT

NODE 1/1 SWITCH SYSTEM PLAYERI PLAYER2 COIN SLOT1 0000 SLOT2 8000 ANALOG CH1 6300 CH2 5A00 CH3 7D00 CH4 8100 CHS5 1F00 CH6 1D00 CH7 1F00 CH8 2000

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON In this test, Functioning of the I/O Board connected to Game Board is displayed and INPUT TEST can be performed. Execute EXIT to return to the MENU

screen.

When INPUT TEST is selected and executed, the following screen appears.

When INPUT is performed, the Switch value changes to 1 from_. Execute EXIT to return to the MENU screen.

Page 43

D. SOUND TEST

Sound Output can be performed and each Speaker can be checked.

Select the desired item and press TEST SOUND TEST Button, and sound is emitted from the MAIN SPEAKER LEFT corresponding Speaker. Execute EXIT to MAIN SPEAKER RIGHT retum to the MENU screen. > EXIT

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

E. C.R.T. TEST

In this test, monitor adjustment can be performed. Periodically check to see if the monitor adjustment is appropriate in this test. This test consists of 2 screens. Use SERVICE Button to change the screen displayed. Press TEST Button to return to the MENU screen.

C.R.T. TEST PAGE#1 The first screen displays color bars. The 0 31 color adjustment can be checked. Each of red, green, blue is the darkest at the RED leftmost end, and becomes brighter GREEN towards the right-hand end.

BLUE

WHITE

PRESS SERVICE BUTTON TO ANOTHER PAGE PRESS TEST BUTTON TO EXIT

The second screen displays crosshatches. In this page, monitor size and deviation can be checked. PAGE#2

PRESS SERVICE BUTTON TO ANOTHER PAGE|, PRESS TEST BUTTON TO EXIT ~

Page 44

F. SYSTEM ASSIGNMENTS

The settings of cabinet and board can be changed. Set each item suitable to the connected cabinet. Use the setting as is the time of shipment except for ADVERTISE SOUND.

SYSTEM ASSIGNMENTS

CABINET TYPE 2PLAYERS ADVERTISE SOUND ON MONITOR TYPE HORIZONTAL DISPLAY MODE AUTOSCAN SERVICE TYPE COMMON

> EXIT

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

O CABINET TYPE specifies Control Panel and number of Coin Chute. The number of Player displayed in BOOKKEEPING varies in accordance with the value here.

O ADVERTISE SOUND is used for settings of emitting sound during ADVERTISE.

O MONITOR TYPE sets the on-screen display to the positional direction of monitor (HORI- ZONTAL or VERTICAL). If set to VERTICAL, the on-screen display for the test mode is vertically positioned in accordance with the setting.

O DISPLAY MODE sets the monitor's display frequency. In this mode, if other than AUTOSCAN is selected and EXIT is executed, the display frequency is changed to the selected setting.

O SERVICE TYPE sets the functioning of when the Service Button is pressed, in case that several Service Buttons exist.

+ INDIVIDUAL By pressing Service Button, Service credit can be obtained for the Player corresponding to the Service Button pressed.

  • COMMON By pressing any Service Button, Service credit can be obtained for all Players.
Page 45

G. COIN ASSIGNMENTS

In this mode, the setting of incremental credit increase as against con insertion can be changed. This test consists of 3 screens, and the following is the first screen. The setting done in the first screen will be stored when exited.

COIN ASSIGNMENTS COIN CHUTE TYPE COMMON COIN/CREDI SETTING #1 COIN CHUTE #1 1COIN 1CREDIT

COIN CHUTE #2 1COIN 1CREDIT

MANUAL SE’ ING SEQUENCE SETTING > EXIT

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

© COIN CHUTE TYPE sets whether Coin Chute is used in common by all players or separately allocated to each player in case 2 or more Coin Chutes are incorporated. COMMON: This setting is for common use by plural players. INDIVIDUAL: As each player uses an independent coin chute, setting to INDIVIDUAL causes COIN CHUTE #2 to be disappeared.

O COIN/CREDT SETTING is set when using one of the existing 26 settings or FREE PLAY. The selected coin rates in the COIN/CREDIT SETTING are displayed below COIN CHUTE #1 and COIN CHUTE #2. If you wish to set a coin rate rather than to select from the existing setting, select MANUAL SETTING. The display next to COIN/CREDIT SETTING indicates "MANUAL", not "#n" in this case.

Page 46

© MANUAL SETTING

When MANUAL SETTING is selected in the first screen, the following second screen appears.

COIN ASSIGNMENTS MANUAL SETTING

COIN TO CREDIT 1 BONUS ADDER 0 COIN CHUTE #1 MULTIPLIER 1 COINCOUNT AS _— 1COIN COIN 123456789 CREDIT 123456789

COIN CHUTE #2 MULTIPLIER 1 COINCOUNT AS _— 1COIN COIN 123456789 CREDIT 12345678 9

SEQUENCE SETTING > EXIT

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

OCOIN TO CREDIT determines how many coins are needed for one credit. (1 ~

© BONUS ADDER determines how many coins should be inserted to obtain one SERVICE COIN.

© COIN CHUTE #1 MULTIPLIER, COIN CHUTE #2 MULTIPLIER sets how many tokens one Coin represents inserted in each COIN CHUTE.

SETTING EXAMPLE 1)

Setting of 2 COINS 1 CREDIT, set to:

COIN TO CREDIT 22 BONUS ADDER :0 COIN CHUTE #1 MULTIPLIER :1

SETTING EXAMPLE 2)

Setting of 5 COINS 6 CREDITS (5 COINS 1 BONUS), set to

COIN TO CREDIT HI BONUS ADDER 5 COIN CHUTE #1 MULTIPLIER :1

When exiting from MANUAL SETTING, if the identical coin rate is in the existing COIN/ CREDIT SETTING, such existing mode other than what is set in the MANUAL SETTING is confirmed.

Page 47

TABLE | COIN/CREDIT SETTING

NAME OF SETTING FUNCTIONING OF COIN CHUTE #1 FUNCTIONING OF COIN CHUTE #2

SETTING #1 1 COIN1_ CREDIT1 COIN1_ CREDIT
SETTING #2 1 COIN2 CREDITS1 COIN1 CREDIT
SETTING #3 1 COIN3__CREDITS1 COIN1 CREDIT
SETTING #4 1 COIN4 CREDITS1 COIN1_ CREDIT
SETTING #5 1 COIN5 CREDITS1_ COIN1 CREDIT
SETTING #6 1 COIN2 CREDITS1_ COIN2_ CREDITS
SETTING #7 1 COIN5 CREDITS1 COIN2 CREDITS
SETTING #8 1_ COIN3 CREDITS1 COIN3__ CREDITS
SETTING #9 1 COIN4 CREDITS1 COIN4 CREDITS
SETTING #10 1 COIN5 CREDITS1_ COIN5_ CREDITS
SETTING #11 1 COIN6 CREDITS1_ COIN6 CREDITS

SETTING #12 2 COINS 1 CREDIT 2 COINS 1 CREDIT

SETTING #13 1 COIN1 CREDIT2 COINS 1 CREDIT
SETTING #14 1 COIN2 CREDITS2 COINS 1 CREDIT
SETTING #15 1 COIN1 CREDIT1 COIN1 CREDIT

2 COINS 3__ CREDITS 2 COINS 3__CREDITS

SETTING #16 1 COIN3. CREDITS1 COIN1 CREDIT

2 COINS 3__CREDITS

SETTING #17 3 COINS 1_ CREDIT 3__ COINS 1 CREDIT

SETTING #18 4 COINS 1 CREDIT 4 COINS 1 CREDIT

SETTING #19 1 COIN1 CREDIT1 COIN1 CREDIT

2 COINS 2 CREDITS 2 COINS 2 CREDITS

  • COINS 3. CREDITS 3. COINS 3. CREDITS

4 COINS 5 CREDITS 4 COINS 5 CREDITS

SETTING #20 1 COIN5 CREDITS1 COIN1 CREDIT

2 COINS 2 CREDITS

  • COINS 3 CREDITS

4 COINS 5 CREDITS

SETTING #21 5 COINS 1 CREDIT 5 COINS 1 CREDIT

SETTING #22 1 COIN2 CREDITS3. COINS 1 CREDIT

5 COINS 2_ CREDITS

SETTING #23 2 COINS 1 CREDIT 2 COINS 1 CREDIT

4 COINS 2 CREDITS 4 COINS 2 CREDITS

5 COINS 3_ CREDITS 5 COINS 3__CREDITS

SETTING #24 1 COIN3. CREDITS2 COINS 1 CREDIT

4 COINS 2 CREDITS

5 COINS 3__ CREDITS

SETTING #25 1 COIN1 CREDIT1 COIN1 CREDIT

2 COINS 2 CREDITS 2 COINS 2 CREDITS

  • COINS 3. CREDITS 3. COINS 3. CREDITS

4 COINS 4 CREDITS 4 COINS 4 CREDITS

5 COINS 6 CREDITS 5 COINS 6 CREDITS

SETTING #26 1 COIN6 CREDITS1 COIN1 CREDIT

2 COINS 2 CREDITS

3 COINS 3. CREDITS

4 COINS 4 CREDITS

5 COINS 6 CREDITS

SETTING #27 FREE PLAY FREE PLAY

Page 48

Table 2: COIN/CREDIT SETTING (COIN CHUTE INDIVIDUAL TYPE)

NAME OF SETTING)EACH SEAT'S COIN CHUTE | NAMEOF SETTINGEACH SEAT'S COIN CHUTE
SETTING #1TCOIN1 CREDITSETTING #21 | 5 COINS1 CREDIT
SETTING #2TCOIN2 CREDITSSETTING #23 | 2 COINS1 CREDIT
SETTING #3TCOIN3 CREDITS4 COINS2 CREDITS
SETTING #4TCOIN4 CREDITS5 COINS3 CREDITS
SETTING #5TCOIN5 CREDITSSETTING #25 | 1 COIN1 CREDIT
SETTING #11 | 1 COIN6 CREDITS2 COINS2 CREDITS
SETTING #12 | 2 COINS1 CREDIT3 COINS3 CREDITS
SETTING #15 | 1 COIN1 CREDIT4 COINS 4 CREDITS
2 COINS3 CREDITS5 COINS6 CREDITS
SETTING #17 | 3 COINS1 CREDITSETTING #27 | FREE PLAY

SETTING #18 | 4 COINS 1 CREDIT SETTING #19 | 1 COIN 1 CREDIT 2 COINS 2 CREDITS

3 COINS 3 CREDITS 4 COINS 5 CREDITS

Table 3: MANUAL SETTING

COIN TO CREDIT1 COIN1 CREDIT

2 COINS 2 CREDIT 3 COINS 3 CREDIT 4 COINS 4 CREDIT 5 COINS 5 CREDIT 6 COINS 6 CREDIT 7 COINS 7 CREDIT 8 COINS 8 CREDIT 9 COINS 9 CREDIT

BONUS ADDER NO BONUS ADDER 2 COINSGIVE 1 EXTRA COIN 3 COINS GIVE 1 EXTRA COIN 4 COINS GIVE 1 EXTRA COIN 5 COINS GIVE 1 EXTRA COIN 6 COINS GIVE 1 EXTRA COIN 7 COINS GIVE 1 EXTRA COIN 8 COINS GIVE 1 EXTRA COIN 9 COINS GIVE 1 EXTRA COIN

COIN CHUTE (#1/#2) 1 COIN COUNTS AS _1 COINS MULTIPLIER 1 COIN COUNTS AS 2 COINS 1 COIN COUNTS AS _3 COINS 1 COIN COUNTS AS_4 COINS 1 COIN COUNTS AS _5 COINS 1 COIN COUNTS AS _6 COINS 1 COIN COUNTS AS _7 COINS 1 COIN COUNTS AS_8 COINS

1 COIN COUNTS AS _9 COINS

4l

Page 49

© SEQUENCE SETTING

When SEQUENCE SETTING is selected in either first or second screen, the SEQUENCE SETTING Mode (the third screen) appears. In this mode, number of credits required for starting game can be set.

COIN ASSIGNMENTS SEQUENCE SETTING

SEQUENCE1 2CREDITS SEQUENCE2 2CREDITS SEQUENCE3 1CREDIT SEQUENCE4 1CREDIT SEQUENCES OCREDIT SEQUENCE6 OCREDIT SEQUENCE7 OCREDIT SEQUENCE8 OCREDIT > EXIT

[ B.F.F. GAME X X X X XX X X] [ SEGA ENTERPRISES,LTD. ] DESCRIPTION OF SEQUENCE SEQ1 CREDIT TO 1 PLAYER START SEQ2 CREDIT TO 2 PLAYERS START SEQ3 CREDIT TO 1 PLAYER CONTINUE SEQ4 CREDIT TO 2 PLAYERS CONTINUE SEQ5 NOT USED SEQ6 NOT USED SEQ7 NOT USED SEQ8 NOT USED

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

Each sequence can be set between | ~ 5. In this example, setting of Sequence | is for 1 Player with | credit to start game. Select EXIT to return to the first screen.

Page 50

H. BOOKKEEPING

This allows such data as operating time/No. of coins inserted/ No. of credits to be checked, etc. This test consists of 2 screens. Pressing SERVICE Button causes screen to be changed. Press TEST Button to return to the MENU screen. On the first screen, such data as total time, coin, and credit are displayed.

COIN CREDIT SERVICE CREDIT TOTAL CREDIT BOOKKEEPING

TOTAL TIME 55H27M13S

COIN1 16 SERVICE1 5 COIN2 4 SERVICE2 0

CREDIT 10

TOTAL COIN 20

PRESS SERVICE BUTTON TO ANOTHER PAGE PRESS TEST BUTTON TO EXIT

© Total Time is displayed as "X X H X X M X XS" and no date will be displayed after exceeding 24 hours.

© The displays for number of coin and number of service vary depending on the CABINET TYPE set in SYSTEM ASSIGNMENTS.

Number of credit displays 1 if COIN CHUTE TYPE is set to COMMON in COIN

ASSIGNMENTS. If COIN CHUTE TYPE is set to INDIVIDUAL, the applicable number in CABINET TYPE setting will be displayed.

On the second screen, each sequence displays the frequency of functioning.

PLAYERI SEQI SEQ2 SEQ3 SEQ4 SEQS SEQ6 SEQ7 SEQ8 BOOKKEEPING

PLAYER2 1 SEQI 0 0 SEQ2 1 1 SEQ3 0 0 SEQ4 1 0 SEQS 0 0 SEQ6 0) 0 SEQ7 0 0 SEQ8 0

PRESS SERVICE BUTTON TO ANOTHER PAGE PRESS TEST BUTTON TO EXIT

Page 51

I. BACKUP RAM CLEAR

Clears contents of BOOKKEEPING, operating time, coin/credit data, number of games played, ete.

BACKUP RAM CLEAR

YES (CLEAR) > NO (CANCEL)

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

Selecting YES clears the aforementioned data. Select NO and press TEST Button to have the MENU moéde return without clearing data.

Note that this does not affect the data of BOOKKEEPING in GAME TEST Mode. To clear the contents of BOOKKEEPING in GAME TEST Mode, enter into GAME TEST Mode and execute BACKUP DATA CLEAR.
Page 52

J. ROM TEST

In this test, on-ROM-BD ROM check is executed. If GOOD is displayed, it is satisfactory. The IC No., TYPE, BYTE, and WORD refers to the check sum of each unit. Press TEST Button to return to MENU mode.

IC30 16M ---- IC31 16M GOOD IC32 16M GOOD 1C33 16M GOOD 1C34 16M GOOD IC37 64M GOOD IC38 64M GOOD 1C39 64M GOOD IC40 64M GOOD ROMBD TEST [B.F.F.GAMEXXXXXXXX] [ SEGA ENTERPRISES,LTD. ]

NO. TYPERESULT NO. TYPE RESULT IC29 16M ---- IC51 64M GOOD IC52 64M GOOD

IC50 64M GOOD IC53S 64M GOOD IC54S 64M GOOD IC55S 64M GOOD IC56S 64M GOOD IC57S 64M GOOD IC58S 64M GOOD IC59S 64M GOOD IC60S 64M GOOD

PRESS TEST BUTTON TO EXIT

In case of above screen, IC 29 and IC 30 do not display GOOD or BAD.

Press SERVICE Button to proceed to the screen the check sum is displayed.

IC29 16M **** IC30 16M **** IC31 16M **** IC32 16M **** IC33 16M **** 1C34 16M **** IC37 64M **** IC38 64M **** 1C39 64M **** IC40 64M ****

64M #8 ees

seek

sot

sete

sot

sete

stk

sete

sot

sot

sok ok

PRESS TEST ROMBD TEST [ B.F.F. GAME X X XX XX X X] [ SEGA ENTERPRISES,LTD. ]

NO. TYPE BYTE WORD NO. TYPE BYTE WORD ICS] 64M HK 4K IC52. 64M HK HK IC53S 64M **## # EE ICS54S 64M **## #e RE ICSSS 64M **#* +e RE ICS6S 64M **#* #eRE ICS7S 64M **#* # eH ICS8S 64M **## ERE ICS9S 64M **## ERE IC60S 64M **#* REE

BUTTON TO EXIT

Page 53

K. CLOCK SETTING

YEAR, MONTH, DAY, HOUR, and MINUTE are set for SEGA HIKARU BD. Select the desired item with SERVICE Button and press TEST Button to increase the value. Bring the arrow to EXIT and press TEST Button to return to MENU Mode.

CLOCK SETTING

1999 07/07 07:07 07 07 WED

YEAR MONTH DAY HOUR MINUTE SECOND

-> EXIT CANCEL

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

L. B.F.F. TEST MENU

Enters the TEST Mode of the game connected to SEGA HIKARU BD. The TEST Mode includes INPUT Test, GAME ASSIGNMENTS such as game difficulty, etc. Refer to 9-3 for details.

Page 54

9-3 GAME TEST MODE (B.F.F. TEST MODE)

A. MENU SCREEN

Select and execute B.F.F. TEST MENU in SYSTEM TEST MENU screen to have the Menu screen of GAME TEST MODE displayed. In the GAME TEST MODE, various settings for "BRAVE FIRE FIGHTERS" can be performed. Operation method is same as in the SYSTEM TEST MODE. By pressing SERVICE Button, move the arrow to the desired item and press TEST Button to execute/change the selected item. SYSTEM TEST MENU screen

SYSTEM MENU

RAM TEST

BOOKKEEPING BACKUP DATA CLEAR ROM TEST CLOCK SETTING A®B.F.P. TEST MENU EXIT

SELECT WITH SERVICE BUTTON

AND PRESS TEST BUTTON

B.F.F TEST MENU

INPUT TEST OUTPU EST SOUND TEST

BOOKKEEPING

A@®EXIT GAME ASSIGNMENTS NOZZLE SENSOR SETTING

BACKUP DATA CLEAR

SELECT WITH SERVICE BUTTON

+ INPUT TEST

+ OUTPUT TEST

+ SOUND TEST

+ GAME ASSIGNMENTS

+ NOZZLE SENSOR SETTING

+ BOOKKEEPING

+ BACKUP DATA CLEAR

+ EXIT Performs INPUT TEST

Performs OUTPUT TEST

Performs SOUND TEST

Set the game difficulty.

Sets the Nozzle Sensor reaction.

Displays various data.

Clears BOOKKEEPING data, etc.

Exit from the TEST Mode.

Page 55

B. INPUT TEST

Allows the status of each Controller, Button, Switch, etc. to be checked. Periodically check the status in this mode.

INPUT TEST

1P WATER [OFF] 2P WATER [OFF] 1P FOG [OFF] 2P FOG [OFF] 1P START [OFF] 2P START [OFF] 1P SIGHT LOCATION — 2P SIGHT LOCATION [X:00H/Y:00H] [X:00H/Y :00H] 1P OUT OF SCREEN OFF 2P OUT OF SCREEN OFF

SERVICE [OFF] TEST [OFF]

PRESS TEST & SERVICE BUTTON TO EXIT

+IP (2P) WATER:DRAINAGE BUTTON
+1P (2P) FOG:FOG STREAM SWITCH
+1P (2P) START:START BUTTON
+1P (2P) SIGHT LOCATION:VALUE OF NOZZLE'S SIGHT LOCATION
+1P (2P) OUT OF SCREEN: JUDGEMENT FOR OUT OF SCREEN
+SERVICE:SERVICE BUTTON
+TEST:TEST BUTTON

Press each Button, and the display changes to ON from OFF.

The volume value when the Nozzle is turned to the screen is displayed in hexadecimal numerals within the range of 00H ~ FFH as corresponding to X and Y coordinate values below "1P (2P) SIGHT LOCATION." "OUT OF SCREEN" goes ON as the sensor can not react when the Nozzle is turned out of screen.

Page 56

C. OUTPUT TEST

Allows the status of each Lamp, Motor, etc. to be checked. Periodically check the status in this mode.

OUTPUT 1

1P START LAMP OFF 2P START LAMP OFF

1P NOZZLE VIBRATION OFF 2P NOZZLE VIBRATION OFF

LEFT REVOLVING LIGHT OFF RIGHT REVOLVING LIGHT OFF

>EXIT

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

+ START LAMP

+ NOZZLE VIBRATION

+ REVOLVING LIGHT START Buttons' Lamps light up.

Vibration of NOZZLE CONTROLLER.

REVOLVING LIGHT lights up.

Bring the arrow to each item and press TEST Button. The right-hand side "ON" & "OFF" display automatically alternates and the lamp lights up and goes off in consistency with the display of "ON" and "OFF."

Page 57

D. SOUND TEST

Selecting SOUND TEST in the MENU Mode displays the following and allows sounds used in game (B.G.M./VOICE/EFFECT) to be checked. Periodically check the status of the sound related BD., IC, and Speaker in this Mode.

SOUND TEST MENU

AUTO SE VOICE B.G.M.

>EXIT

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

SOUND TEST

SE

No. 0

SELECT WITH SERVICE BUTTON PRESS TEST BUTTON TO EXIT

+AUTO:Sound Effects >VOICE

>B.G.M. are emitted sequentially in order.

+SE:Sound Effects are

emitted.

*VOICE:Voice during game is

emitted.

+B.G.M.:Background music

during game is emitted.

EXIT:Finishes Sound Test.

Select the item with SERVICE Button and press TEST Button.

Sounds used in the game such as SE, VOICE, B.G.M. are emitted in each test item. In AUTO, SE, VOICE, and B.G.M. respectively, every time SERVICE Button is pressed, the next sound within No. 0 ~ X is emitted. (The screen shown left is in case of SE) Press TEST Button to return to the SOUND TEST MENU screen.

In case of AUTO, pressing SERVICE Button once causes sounds to be emitted continuously from No. 0. Press SERVICE Button to stop emitting sound for a while, and press SERVICE Button again to restart emitting sound from the current status.

Page 58

E. GAME ASSIGNMENTS

Sets the game difficulty. The following can be set for each level.

GAME ASSIGNMENTS

TIME BONUS DIFFICULTY LEVEL 5 (NORMAL) WATER DRAINAGE DIFFICULTY LEVEL 5 (NORMAL)

>EXIT

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

+ TIME BONUS DIFFICULTY The Increase/Decrease of Time Bonus added can be determined as follows.

LEVEL1 (VERY EASY) . Increased by 64 seconds in each stage LEVEL2 .......... increase by 32 seconds in each stage. LEVEL3 (EASY) increased by 16 seconds in each stage. LEVEL4 .......... increased by 11 seconds in each stage. LEVELS (NORMAL) This is the standard setting. LEVEL6 Decreased by 11 seconds in each stage. LEVEL7 (HARD) Decreased by 16 seconds in each stage. LEVEL8 LEVEL9 (VERY HARD). Decreased by 32 seconds in each stage. Decreased by 64 seconds in each stage.

+ WATER DRAINAGE DIFFICULTY Effectiveness of water discharged in distinguishing a fire in each stage can be determined as follows.

LEVEL1 (VERY EASY) . Increased by 35% LEVEL2 increased by 25% LEVEL3 (EASY) Increased by 15% LEVEL4 .......... Increased by 5% LEVELS (NORMAL) This is the standard setting. LEVEL6 .......... Decreased by 5% LEVEL7 (HARD) Decreased by 15% LEVEL8 Decreased by 25% LEVEL9 (VERY HARD). Decreased by 35%

Select EXIT and press TEST Button to return to GAME TEST MODE Menu screen.

Page 59

F. NOZZLE SENSOR

NOZZLE SENSOR SETTING

1P NOZZLE CHECK 2P NOZZLE CHECK

1P NOZZLE SETTING 2P NOZZLE SETTING

1P DEFAULT SETTING 2P DEFAULT SETTING

>EXIT

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON Sets the Nozzle Controller's reaction range. Choose the item from among the following.

+1P NOZZLE CHECK +2P NOZZLE CHECK

+1P NOZZLE SETTING *2P NOZZLE SETTING

+1P DEFAULT SETTING +2P DEFAULT SETTING

Select EXIT and press TEST Button to return to GAME TEST MODE Menu screen.

1P NOZZLE CHECK

1P SIGHT LOCATION. [X:000.000/Y:000.000] *———___

SIGHT

PRESS TEST BUTTON TO EXIT @ | P(2P) NOZZLE CHECK The Nozzle Controller can be checked by moving the SIGHT in the current moving range. Displays the actual coordinate value of the SIGHT. When the SIGHT goes out of screen, "OUT OF SCREEN" will be displayed. If everything is satisfactory, press TEST Button to exit. If problem is found with the current moving range area, return to NOZZLE SENSOR SETTING screen and perform setting in each setting screen.

Page 60

P 1P NOZZLE SETTING

Aim at the UPPER-LEFT corner of the screen

Decide with 1P START or 1P WATER BUTTON

PRESS TEST BUTTON TO EXIT @|P(2P) NOZZLE SETTING Sets t he SENSOR's reaction range area by marking 4 corners and the center of the screen.

Aim at UPPER-LEFT corner of the

screen Aim at UPPER-RIGHT corner of the screen Aim at LOWER-RIGHT corner of the screen

® Aim at LOWER-LEFT corner of the ®aim at CENTER of the screen

screen

‘—— Perform Marking for setting the screen range sequentially in order of () Upper Left > Upper Right >@) Lower Right >@) Lower Left > (5 )Center of the screen. Turn the SIGHT and mark with START Button or DRAINAGE Button.

1P NOZZLE SETTING

Ab at the CENTER of the scree

Decide with 1PS§TART or 1P WA

PRESS TEST BUTTON TO EXIT Upon finishing marking through ®. the screen range's diagonal extended from the 4 corners is displayed.

Afterward,(5) Center is marked and then

the screen proceeds to 1P(2P) NOZZLE CHECK after all 5 markings are completed.

Page 61

1P NOZZLE CHECK

1P SIGHT LOCATION [X:000.000/Y:000.000] | O

YES(SAVE) ~~ >NO (CANCEL)

SELECT WIT! AND PRES: SERVICE BUTTON TEST BUTTON

1P DEFAULT SETTING

1P SIGHT LOCATION [X:000.000/Y :000.000]

fe)

YESAiSAVEAj >NO (CANCEL)

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON The Nozzle Controller can be checked by moving the SIGHT freely within the moving range determined in the 1P (2P) NOZZLE SETTING. |—~ Displays the actual coordinate value of the SIGHT. When the SIGHT goes out of screen, "OUT OF SCREEN" will be displayed. t— Select YES (SAVE) to save the setting data, and the setting is complete. Select NO (CANCEL) to return to 1P (2P) NOZZLE SETTING and set the marking again from ® Upper Left.

@|P(2P) DEFAULT SETTING The pre-programmed default value can be set as the Nozzle Controller's sensor range. Check to see by moving the SIGHT. If the default value is satisfactory, select YES (Save) to save

the default value setting. If the SIGHT

does not move within the correct range, perform the setting individually in the 1P (2P) NOZZLE SETTING.

Page 62

G. BOOKKEEPING

BOOKKEEPINGPAGE 1/2@BOOKKEEPING (PAGE 1/2)

Displays the data of operating status with respect to game play time. Page 1/2 displays the detailed game play time. TIME REPORT

TOTAL TIME 00D 00H 00M 00S PLAY TIME 00D 00H 00M 00S NUMBER OF GAMES. 00

AVERAGE PLAY TIME OM 00S LONGEST PLAY TIME OM 00S SHORTEST PLAY TIME OM 00S

PRESS TEST BUTTON TO CONTINUE

*TOTAL TIME:The total energized time.
*PLAY TIME:Total play time.
+NUMBER OF GAMES:Total number of plays.

+ AVERAGE PLAY TIME + LONGEST PLAY TIME + SHORTEST PLAY TIME

Press TEST Button to proceed to the next screen.

BOOKKEEPING PAGE 2/2 @BOOKKEEPING (PAGE2/2) Displays the data of operating status with respect to game play time. Page 2/2 displays the Histogram of TIME HISTOGRAM

0M 00S ~ 0M 29S 0 : ;

OM 30S ~ 0M 59S)Number of Play as against Play Time.
1M 00S ~ 1M 29S0By-playtime play frequency bookkeepin;
1M 30S ~ 1M 59S0: ye et dineists bie 0 ig
2M 008 ~ 2M 2980is displayed in increments of30 seconds
2M 30S ~ 2M 59S0from 0MO0S to 9M59s. Playtime in
3M 00S ~ 3M 29Sto)excess of 10 minutes is saved all in the
3M 308 ~ 3M 598°category of OVER 10MO00S.

9M 00S ~ 9M 29S 0 9M 30S ~ 9M 59S 0 OVER 10M 00S 0

PRESS TEST BUTTON TO EXIT

Press TEST Button to return to the Menu screen of GAME TEST Mode.

Page 63

H. BACKUP DATA CLEAR

Clears BOOKKEEPING data and RANKING data. When clearing, bring the arrow to "YES" and press TEST Button. Move the arrow to "NO" and press TEST Button when not clearing. The screen automatically retums to the Menu screen of GAME TEST Mode.

BACKUP DATA CLEAR

YES (CLEAR) >NO (CANCEL)

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

Page 64
  • NOZZLE CONTROLLER
WARNING!
CAUTION! Before starting to work, ensure that the Power SW is OFF. Failure to observe this can cause electric shock or short circuit. Use care so as not to damage wirings. Damaged wiring can cause electric shock or short circuit. Do not touch undesignated places. Touching places not designated can cause electric shock or short circuit. This work should be performed by the Location's Maintenance Man or Serviceman. Performing work by non-technical personnel can cause electric shock hazard. Do not perform work other than those specified in this Manual in order to prevent accidents during performing work and operation after performing work. Performing work not specified in this Manual may require special training for this product. If performing work other than those stated in this manual is required for repair, contact the offices herein stated in this manual or where you purchased the product from and ask for repair or inquire how to repair.

When handling the parts inside the Nozzle Controller, use care so as not to cause

damaging, missing, or deformation of parts. For example, applying excessive

load in an attempt to connect the connector to the wrong direction can damage wiring or soldering on the PCB resulting in insufficient connection, etc.

Since Nozzle Controller is composed of many parts, replacement of each part is not separately explained in this manual. However, this manual explains how to disassemble Nozzle Controller. When a part replacement is necessary, disassemble Nozzle Controller by referring to this manual up to the point in which the part replacement is explained. In order to disassemble Nozzle Controller, first remove Security Wire and then take off Nozzle Controller from the Cabinet. Security Wire can be replaced in the manner as Security Wire is removed. When Nozzle Controller is removed from the cabinet, the Hose and Nozzle Controller, respectively, can be replaced.

10- 1 REMOVING THE SECURITY WIRE

CAUTION! The Security Wire is an important accident preventative part. If damaged, immediately replace the Security Wire. Using the Wire as is damaged will cause personal injury.

To perform following work, a Phillips type screwdriver and a wrench for M3 hexagon Nut are necessary.

© Turn off power for safety.

Page 65

® Take off 4 Truss screws and remove the removing side of Panel Lid from the Control Cabinet.

F

PANEL LID

TRUSS SCREW (6)

PHOTO 10. 1a

@ Take off screw from the inside where Panel Lid is removed to take off a Shoulder pin.

M4 X 6,w/spring washer, flat washer used.

PHOTO 10. 1b

Page 66

® Take off 4 Flat Head screws

from the nose of Nozzle Controller and remove the Security Plate. SECURITY PLATE

FLAT HEAD SCREW (4), M3 X10

PHOTO 10. le

  • Take off 2 Flange Nuts and remove the Security Hook from the Security Plate.

SECURITY HOOK

PHOTO 10. 1 d Security Plate (Front)

SECURITY WIRE

FRQ-2708

FLANGE NUT (2)

PHOTO 10. 1 e Security Plate (Reverse)

Page 67

10 - 2, REMOVING THE ASSY SENSOR

@tum off power for safety.

Perform work up to the procedure aC in 10-1 REMOVING THE SECURITY WIRE. (PHOTO 10. 1 c)

Take out the ASSY SENSOR from ‘ASSY SENSOR the Nozzle Controller. At this time, use care so as not to damage the wiring and the joint portion. NOZZLE CONTROLLER

® Disconnect the wiring connector

from the ASSY SENSOR board.

PHOTO 10.2a

© Take off 2 screws to disassemble

the ASSY SENSOR.

wow

SCREW (2) M3 X 6w/flat & spring washers

PHOTO 10.2¢ PHOTO 10. 2b

Page 68

10 - 3 REMOVING THE NOZZLE CONTROLLER

To perform the following work, a Philips type screwdriver, a Wrench for M4 Hexagon Nut, Wrenches for Hexagon Nut (width across flats 14 & 50 mm), and a Hexagon Wrench (width across flats 2mm) are needed. When the Wrench width across flats 50 mm is not available, use an alternative Pliers that can pinch the same size of the Nut.

® Perform work up to the procedure ® in 10-1 REMOVING THE SECURITY WIRE.

@ Disconnect the connector from the Inner Hose Bracket.

® Take off 4 Flange Nuts to remove the Inner Hose Brackets A and B from the Control Cabi. At this time, remove Earth terminal fastened by the Nut.

FLANGE NUT (4)

Remove Earth terminal INNER HOSE BRACKET

Disconnect the connector.f

PHOTO 10.3 a

Page 69

® Take off 2 screws, loosen a HEXAGON NUT (2)

Hexagon Bolt, and separate Inner Hose Bracket A from B. When reassembling, match the notch portion of the Inner Hose Bracket A & B and the Nut fastening part's flat surface.

INNER HOSE BRACKET A

INNER HOSE BRACKET B

SCREW (2) M4 X 8,w/flat & spring washers

PHOTO 10.3 b

® Take off the Nut which secures the

Hose to remove the Nozzle Controller together with Hose from the Control Cabinet.

NUT

NUT

HOSE,

PHOTO 10.3 ¢

Page 70

SET SCREW (2)

© Take off 2 Set screws to

remove the Hose from the Nozzle Controller.

NOZZLE CONTROLLER

PHOTO 10. 3e

10 - 4. DISASSEMBLING THE NOZZLE CONTROLLER,

To perform the following work, a Philips type screwdriver and a Hexagon Wrench (width across flats 1.5mm) are needed. The Nozzle Controller contains small parts. When taking Nozzle Controller to pieces, be very careful so as not to damage, distort, or lose the parts. Further, when putting the parts together, use care so as not to pinch wiring in.

SET SCREW (2)

® Perform work as per 10-3

REMOVING THE NOZZLE CONTROLLER to remove Nozzle Controller from the Control Cabi.

END RING.

@ Take off 2 Set screws to remove the

END RING from the Nozzle Controller.

PHOTO 10.4 a

Page 71

Take off 4 screws which are on the center line of Nozzl itroller's one side. At non lozzle|Controllers.one side SCREW (4).M3 X 25 NUT (4),M3 this time, leave the 4 screws of the other : side. The other side from the reverse.

@®Take off 4 pairs of Screw and Nut from

the strap installing portion.

® Take off 2 screws which secure ASSY

NOZZLE.

© Take out the ASSY NOZZLE slowly to

the point where the metallic parts inside ASSY NOZZLE appears. SCREW (4) M3 X 10,spring washer used.

SCREW QQ) M4 X 14,w/spring washer .

PHOTO 10.4 b

@ Remove one side of body. Removing one side of body allows Strap and SW Unit to be removed.

Disconnect the connector of ASSY NOZZLE.

Disconnect the connector.

Disconnect the connector, ASSY NOZZLE

PHOTO 10.4 sre

Page 72

Remove ASSY NOZZLE from the Body. Removing ASSY ASSY NOZZLE NOZZLE allows Joint Ring, Return Spring, and Action Grip to be removed.

ACTION GRIP PHOTO 10. 4d

Take off 2 Flange Nuts to

remove Nut from the SW base, and the SW UNIT can be taken FLANGE NUT (2) M3 to pieces for each part.

FLANGE NUT (2) M3

FIG. 10.4a

SWMS-327-R 509-5913

PHOTO 10.4 ¢

Page 73

INSTALLING RETURN SPRING

Insert the RETURN SPRING through the Joint Ring Shaft. At this time, insert one end of RETURN SPRING into the Joint Ring hole.

@ Fit Action Grip on to Joint Ring with Return Spring attached. At this time, insert the Return Spring's edge to the Action Grip's hole.

® Secure the Joint Ring and turn the Action Grip to the direction as shown. The Joint Ring is in place in the Action Grip.

ACTION GRIP

Insert the Return Spring's ed to the Action Grip's ho!

Insert the Return Spring's edge RETURN SPRING | to the Action Grip's hole.

JOINT RING

FIG. 10.4b

Page 74
  • COIN SELECTOR

HANDLING THE COIN JAM

If the coin is not rejected when the REJECT button is pressed, open the coin chute door and open the selector gate. After removing the jammed coin, put a normal coin in and check to see that the selector correctly functions.

“LEANING THE COIN SELECTOR

IMPORTANT @ Remove and clean smears by using a soft cloth dipped in water or diluted chemical detergent and then squeezed dry. Never apply machine oil, etc. to the Coin Selector. After cleaning the Coin Selector, insert a regular coin in the normal working status and ensure that the Selector correctly functions.

The coin selector should be cleaned once every 3 months. When cleaning, follow the procedure below: Turn the power for the machine OFF. Open the coin chute door.

@ Open the gate and dust off by using a soft brush (made of wool, etc.)

(made of wool, etc.). Remove and clean smears by using a soft cloth dipped in water or diluted chemical detergent and then squeezed dry. Remove the CRADLE. When removing the retaining ring (E ring), be very careful so as not to bend the rotary shaft. Remove stain from the rotary shaft and shaft

receiving portions by wiping off with a soft © After wiping off as per 4D above, further apply

cloth, etc.

a dry cloth, etc. to cause the coin selector to dry completely.

COIN INSERTION TEST

Once every month, when performing the Coin SW Test, simultaneously check the following: Does the Coin Meter count satisfactorily? |—] Does the coin drop into the Cashbox correctly? [7] Is the coin rejected when inserted while keeping the Reject Button pressed down? Insert a coin while keeping the Reject Button pressed down and check if'it is rejected.

COIN METER FIG. lla

FIG. llc

Page 75

U0 AIIALASNIS MMM FUNSOTONA TWldsdS %

0€99-9€€-008-L 6£909 I ‘OOVOIHD FUVCTIN'N LOLZ NOLLVYOdYOD SIINOYLIITI WO2'939 MW MMM YOLVaNvA THE HLIM S3IMLNS 2 YOOG INI Y3GNN/YIAO LO-OLL2-S LGM 400d WOLLOS

YINCYVS-STTIM

Page 76

Tom Happ Ph: 847-593-6161 ext. 107 tom.happ@happcontrols.com Fx: 847-956-2091 Happ Controls, 106 Garlisch Drive, Elk Grove, IL 60007 Visit our website http://www.happcontrols.com 42-0641-00

  • 42-0405-00 FOR $.25 COIN 42-0405-05 FOR $1.00 COIN er 42-1044-00 $1.00 4 x .25 1 PLAY ———_ 42.0895-05 $1.00 PUSH TO REJECT

42-7201-00 a Ut 1 oo

i

43-1003-00. 42-7355-00 42.0065-00: 42-0063-00. $0.25 42-3079-00 $1.00 42-3113-00 @a— 43-0021-00

42-7087-00- 43-01396-00—er 42-6178-00

3 42-0526-00 42-0082-00 Lee 42-8177-400 Guardian Hasp 30-2400-200

Page 77

OPTIONAL DOLLAR BILL ACCEPTOR

@ THE COIN DOOR ASSEMBLY USED ON BRAVE FIREFIGHTER DX TYPE COMES EQUIPPED TO ACCEPT A DOLLAR BILL ACCEPTOR. ALL NEEDED WIRING CONNECTIONS ARE CONVIENENTLY LOCATED INSIDE THE GAME FOR THIS APPLICATION.

@ THE COIN DOOR CAN ACCCOMMODATE THE FOLLOWING VALIDATOR(S):

FORWARD-MOST Mars 2000 series HOLE POSITION

**42-1155-00 MARS VALIDATOR $1, 2,5 300 CAP

The frame and cashbox enclosure on this coindoor has been modified to accomodate a Mars 2000 series upstacker. A 2000 series stacker can be added by simply removing the cut-out plate. This one entry door can be ordered through Happ Controls or one of Happ Controls authorized distributors. The part number is 40-6000-10EX. The Mars stacker can be obtained through an autherized Mars distibutor.

Note: Your game may have either Happ Controls Coin Door Assembly or the Wells Gardner Coin Door Assembly (not shown).

**Happ part number

Security Locking Bar/Bracket Set Part No.# 999-0966

Modified Cash Box (For use when DBA installed) Part No. # 999-1106

Plastic Cash Box - Full Size Part No. # 999-1177

Page 78

12. PROJECTOR

A

CAUTION!

The Projector is subject to color deviation due to Convergence deviation caused by the geomagnetism at the installation location and peripheral magnetic field. After the installation of machine, and before commencing operation, check for Convergence deviation and if deviated, make adjustments.

IMPORTANT

Projector adjustments are stored. Due to distortion or color deviation in the TEST mode, if an adjustment is necessary, use the Remote Control to make adjustments. There are two Projector Makers (Toshiba and Mitsubishi) and the adjustment method varies depending on the specific maker.

12 - | CLEANING THE SCREEN

Since the Projector screen is susceptible to damage, pay careful attention to its handling. When cleaning, refrain from using water or volatile chemicals.

CAUTION!

When the screen surface comes dirty with dust, etc., clean it by using a soft cloth such as gauze. ‘When water, and volatile chemicals such as enzine, thinner, etc., spill on the screen surface, it may be subject to damage, therefore, do not use them. Also, since the surfaces are susceptible to damage, refrain from rubbing them with a hard material or using a duster.

FIG. 12.1

.seuservice.com 71 ww

Page 79

12 -2 ADJUSTMENT OF TOSHIBA PROJECTOR

SETTING THE INTERFACE

S In this product, set to INPUT LEVEL: 0.7V and IMPEDANCE: 75Q. Failure to

observe this can cause CRT membrane to burn or Shutdown device to function resulting in power off.

IMPORTANT —

The Projector's Connector Panel contains the Interface setting SW.

O (e)

(fe) ci = WINNER AC IN on LAMP scroo-s20v~ MON oe N_—-MPEDANCE PUT LEVEL 0 a7y_ sv fe)

REMOTE CONTROL BUTTONS

When adjusting the Projector, direct the Remote Control's light emitting portion towards the Projector Screen.

4 REMOTE CONTROL LIGHT EMITTING PORTION

MODE (mode selection) — TEST (adjust/normal shift) “é 'C@ jon) LI AN R.G.B. (color selection)-<<—$ WRITING (storing the data) P (automatic color matching) “6 G~— sET (to decide the selection) PIC - ADJ (item selection)

POSITION (to select the position) —# | _ cy @ ay RESET ADJUST (adjustment): SELECT (pattern selection)

Page 80

AUTOMATIC COLOR MATCHING

The Projector may be subject to color deviations affected by earth magnetism, the building steel frames, etc. When the Projector is initially installed or the Projector's installation position is changed, have the color matching performed automatically.

® Keep pressing the P button (red) for approximately 3 seconds to have

the ensuing movements performed automatically.

The Projector will shift to the color deviation

® correction mode from the game mode, with

the green cross pattern appearing on the screen.

an

left to start the movement of searching the cor- | The cross pattem moves up/down and right/ rect screen position and inclination.

When the green cross pattern movements are finished, similar detection is performed sequentially in order of red and then blue cross movements. After detecting by green, red and blue cross movements, the game mode returns with the color deviation status being corrected.

@ Although very rarely, the TRY AGAIN error display in red may appear. At this time, press the P button (red) for approximately 3 seconds. Even after the above operation is repeated, if the error condition still exists, then the display shifts to PLEASE ADJ. In this case, the auto color matching function can not be used. Contact the place of contact herein stated or where the product was purchased from.

@ Ifthe automatic color matching indicates an error, color matching can manually be performed. Refer to CONVERGENCE ADJUSTMENT (manual color matching).

Page 81

ADJUSTING THE O: REEN CONTRAST

Although the on-screen picture quality has been adjusted at the time of shipment from the factory, the on-screen contrast can be readjusted if desired. When the Game Board is replaced, readjustment may be necessary. Changing the CONTRAST causes the light and shade of the on-screen images to be changed. A PIC-ADJ

Herein, /\ procedure is skipped. pIccaDy

SET

ee ® Press either Ay or W PIC - ADJ button.

The on-screen menu will have one item in purple and 6 items in white. CONTRAST BRIGHTNESS H.POSI V.POSI H.SIZE V.SIZE EXIT

@ Choose CONTRAST by using either 4& or W

PIC - ADJ button.

Have CONTRAST dis-

CONTRAST played in purple. Since

H.POSI CONTRAST is selected ae initially, no particular V.SIZE operation is required in this Bean case.

® Press the SET button (to decide selection). When the selection of the CONTRAST adjustment mode is decided, the adjustment data scale bar appears on the screen.

CONTRAST 230

Bee eee ee eves re

  • Make adjustment by using either <q or | ADJUST button. As the Cursor is moved, the adjustment data value changes. Make adjustment so as to obtain the desired on-screen contrast status.

CONTRAST 156

Peeeee ee Waeeeeeeea ”

WRITING ® Press the WRITING button (for storing and finish).

The WRITING display appears and the adjustment data is stored.

WRITING

@ When discontinuing the adjustment, choose EXIT from the menu at the stage of procedure (2) and press the SET button. @ To continue adjusting other menu items, repeat procedure(2) ~ ® : @ Unless the adjustment data is stored, the data in the adjusted~status will be erased at the time the power is turned off and the pre-adjustment status will remain when the power is tured on next time.

Page 82

ADJUSTING THE SCREEN BRIGHTNESS

Although the on-screen picture quality has been adjusted at the time of shipment from the factory, readjustment can be made if desired. When the Game Board is replaced, readjustment may be necessary. Changing the BRIGHTNESS causes the brightness of the on-screen images of black portions to be changed. / ® Press either 4, or W PIC - ADJ button. The on-screen menu will have one

PIC-ADJ CONTRAST

BRIGHTNESS item in purple and 6 items in H.POSI white. V.POSI H.SIZE V.SIZE EXIT,

@ Choose BRIGHTNESS by using either 4 or W PIC A - ADJ button IC-ADJ CONTRAST Have the BRIGHTNESS displayed

A - ADJ button.

BRIGHTNESS in purple. H.POSI V.POSI H.SIZE. V.SIZE EXIT.

SET ® Press the SET button (to decide selection). When the selection of the BRIGHTNESS adjustment mode is decided, the adjustment data scale bar appears on the screen.

BRIGHTNESS 128 Beene Bere er

® Make adjustment by using either < or > ADJUST CRYST button. As the Cursor is moved, the adjustment data value changes. Make adjustment so as to obtain the desired on-screen brightness status. BRIGHTNESS 156 Beene Weaecee eee ”

WRITING ® Press the WRITING button (for storing and finish).

The WRITING display appears and the adjustment data is stored.

WRITING

@ When discontinuing the adjustment, choose EXIT from the menu at the stage of procedure (2) and press the SET button. @ To continue adjusting other menu items, repeat procedure(2) ~ @® @ Unless the adjustment data is stored, the data in the adjusted status will be erased at the time the power is tumed off and the pre-adjustment status will remain when the power is turned on next time.

Page 83

DJUSTING THE ON-SCREEN DISPLAY POSITION

Although the on-screen display position (H. POSI, V. POSI) has been adjusted at the time of shipment from the factory, readjustment can be made if desired. When the Game Board is replaced, readjustments may be necessary.

® Press either 4, or W PIC - ADJ button.

© The on-screen menu will have

PIC-ADJ CONTRAST BRIGHTNESS. one item in purple and 6 items in H.POSI white. V.POSI H.SIZE V.SIZE EXIT

@ Choose H. POSI or V. POSI by using either 4 or Vv

PIC ADJ button.

Have the H. POSI or V. POSI co ease displayed in purple. The Figure H.POSI shows the status in which H. V.POSI H.SIZE POST is selected.

V.SIZE EXIT

® Press the SET button (to decide selection). SET When the selection of the H. POSI or V. POSI is decided, the adjustment data scale bar appears on the screen.

H.POSI 128 Beeeseee Heese eee 1

® Make adjustment by using either <q or > ADJUST ci SBMS button.

.) O As the Cursor is moved, the

adjustment data value changes. When making adjustments Make adjustment so as to obtain in vertical directions, also the desired on-screen position ‘ status. use either or < > H.POSI 156 ADJUST button. .- 4

WRITING (3) Press the WRITING button (for storing and finish). The WRITING display appears and the adjustment data is stored.

WRITING

@ When discontinuing the adjustment, choose EXIT from the menu at the stage of procedure(2) and press the SET button. @ = To continue adjusting other menu items, repeat procedure(2) ~ ® @ Unless the adjustment data is stored, the data in the adjusted status will be erased at the time the power is turned off and the pre-adjustment status will remain when the power is tured on next time.

Page 84

ADJUSTING THE SCREEN SIZE

Although the on-screen size (H. SIZE, V. SIZE) has been adjusted at the time of shipment from the factory, readjustment can be made if desired. When the Game Board is replaced, readjustments may be necessary.

PIC-ADJ

«ADJUST ;

When making adjustments in vertical directions, also use either <q or > button.

WRITING. ® Press either 4, or W PIC - ADJ button.

CONTRAST BRIGHTNESS H.POSI V.POSI H.SIZE V.SIZE EXIT

PIC - ADJ button.

CONTRAST BRIGHTNESS H.POSI V.POSI H.SIZE V.SIZE EXIT

® Press the SET button

button.

WRITING The on-screen menu will have one item in purple and 6 items in white.

@ Choose H. SIZE or V. SIZE by using either 4 or W

Have the H. SIZE or V. SIZE displayed in purple. The Figure shows the status in which H. SIZE is selected.

(to decide selection). When the selection of the H. SIZE or V. SIZE adjustment mode is decided, the adjustment data scale bar appears on the screen.

  • Make adjustment by using either < or > ADJUST

As the Cursor is moved, the adjustment data value changes. Make adjustment so as to obtain the desired on-screen position status.

® Press the WRITING button (for storing and finish). The WRITING display appears and the adjustment data is stored.

@ When discontinuing the adjustment, choose EXIT from the menu at the stage of procedure (2) and press the SET button. @ To continue adjusting other menu items, repeat procedure(2) ~ @®. @ Unless the adjustment data is stored, the data in the adjusted status will be erased at the time the power is tumed off and the pre-adjustment status will remain when the power is turned on next time.

Page 85

CONVERGENCE ADJUSTMENT (manual color matching)

A

CAUTION!
IMPORTANT! To avoid circuitry malfunctioning due to electrical load increase, never utilize CONVERGENCE ADJUSTMENT (Line Convergence Adjustment in particular) for adjusting screen size changes. There is no means to restore the Convergence Adjustment data once stored, to its original state. To avoid changing the screen size by erroneously using convergence adjustment, do not perform the green Line Convergence Adjustment. As such, be sure to perform the adjustment work from this page onward by the Technical staff and the location's Maintenance Personnel who are well versed in such adjustment work. In the Static Convergence Adjustments, if satisfactory adjustments can not be performed, do not make another convergence adjustments inadvertently. Contact the office herein stated or where the product was purchased from.

To avoid making the adjustment work ineffective, do not press the RESET button during adjustment.

To discontinue adjustment work, keep pressing the TEST button for approximately 3 seconds at the stage before storing the adjustment data by pressing the WRITING button. Should the screen be abnormally disturbed by noise due to static electricity, etc., turn the power off without storing the adjustment data. Pressing the A or W PIC - ADJ button in the Convergence Adjustment mode status will display the Adjustment Menu shown right. Do not utilize this ADJUST Adjustment Menu as this is the one applied at the factory.

Adjusting this menu causes the ae H deviated. EXIT

Customer's adjustment range to be SUB BRIGHT

Should the menu shown right be displayed by mistake, first choose EXIT by using either & or W PIC - ADJ button and then press the SET button. Adjustment menu used in the factory.

Page 86

STATIC CONVERGENCE ADJUSTMENT

In the static convergence adjustment, each of red and blue images is comprehensively moved to and superimposed on the green color. If automatic color matching function is not sufficiently satisfactory, perform this adjustment. Be sure to perform automatic color matching before starting the above adjustment.

When either of2) ~ 4) COLOR SELECT buttons (R, B) is pressed, if the color desired to be adjusted disappears, press that particular button again. For example, if the red color needs to be

adjusted again at the stage of ® theR

button need to be pressed twice.

® Keep pressing the TEST button for

approximately 3 seconds.

[—AbsUSP MODE— The screen will change to ADJUST mode from the Game mode to cause the green test pattern to be displayed on the screen.

@) Press the R button to have the red adjustment

mode.

[—ADsUS}]/ MODE— The red test pattern is added to the display. The frame color turns red and this signifies the red adjustment mode.

® Make adjustment by using the A W <4 | ADJUST buttons.

[—ADIUSP MODE—

mode.

—ADIUg Ir MODE— Make adjustment so as to have red superimposed on green. When red is superimposed on. green, the color becomes yellow.

® Press the B button to have the blue adjustment

Similarly as in the case of red, adjust the blue color. When green, red, and blue are superimposed, the color becomes white.

® Press the WRITING button (for storing and finish). The WRITING display appears and the adjustment data is stored. After the data is stored, the Game mode returns.

Page 87

POINT CONVERGENCE ADJUSTMENT

In the POINT CONVERGENCE adjustment, each of red, green and blue images is partially moved for color matching. The adjustment may be necessary when the Game Board is replaced or changed, or screen size is changed. Be sure to perform automatic color matching before starting

the adjustment. ® Keep pressing the TEST button for

approximately 3 seconds.

[—ADuuSF MODE— The screen changes to ADJUST mode from the Game mode and displays the green test pattern.

@ Press the MODE button twice to have the POINT

ADJUSTMENT mode. Note 1

is is The crosshatch test pattern appears MARKER eee SEE EEEEEy and the MARKER indicating the adjustment point is displayed.

3 )Using either R or B button, select the desired color . Note2 By using the G button, the also be selected.

= = The selected color is displayed by superimposing on green. The MARKER will be in the color selected.

® By using the & W <q > ADIUST buttons,

Note 1. When the MODE button is repeatedly move the MARKER to the position to be adjusted.

pressed, the adjustment modes will ct ct The MARKER moves in the

circulate as follows: direction of the button's arrow. However, the movable point is STATIC ADJUSTMENT MODE predetermined.

LINE ADJUSTMENT MODE © Make adjustment by using the A W <q p> ADJUST buttons. POINT ADJUSTMENT MODE Although the direct vicinity of the MARKER's center moves most . ~ ~ conspicuously, make adjustment

Note 2. When either of the COLOR SELECT by paying attention to the periphbuttons (R, B) is pressed, if the desired ery area also. Shown left is the color to be adjusted disappears, press magnified MARKER periphery.

that particular button again. © Press the SELECT button as necessary to

superimpose Game Board images. Note 3

Note 3 By repeatedly pressing the SELECT UPeTMPOS 8 oe button, only the Projector's TEST If the test pattern is not displayed in on on the periphery of the screen, adjust- Pattern Screen and the screen ments can be made by pressing the superimposing the Game Board Test SELECT button to superimpose the pattern can be alternately displayed. test pattern and the Game Board's CRT test screen.

WRITING button (for storing and finish).

WRITING is displayed and the adjustment data is stored. After the data is stored, the Game Board screen returns.

Page 88

LINE CONVERGENCE ADJUSTMENT

In the LINE CONVERGENCE ADJUSTMENT, the adjustment point of the column line (vertical) or row line (horizontal) is comprehensively moved for color matching. It is convenient to utilize this adjustment when the color of the column line or row line is uniformly deviated.

® Keep pressing the TEST button for approximately

MARKER 3 seconds.

[—ADIUSF MODE— The screen changes to ADJUST mode from the Game Board mode and displays the green test pattern.

@ Press the MODE

ADJUSTMENT button once to have the POINT mode. Note |

The crosshatch test pattern appears and the vertically long MARKER

Note 1 When the MODE button is repeatedly pressed, the adjustment modes will circulate as follows:

STATIC ADJUSTMENT MODE

LINE ADJUSTMENT MODE is shown.

® Using either R or B button, select the desired color to

be adjusted. Note 2 Although the green color can also be selected by using the G button, to avoid the screen size change adjustment, do not choose green. The selected color is displayed by superimposing on green. The MARKER will be in the color selected.

AV <P Position buttons, MARKER to the position to be adjusted. Use the <{ p> buttons to select the column line, and the MARKER. POINT ADJUSTMENT MODE

Note 2. When either of the COLOR SELECT

buttons (R, B) is pressed, if the desired color to be adjusted disappears, press moves in the right/left direction. However, the movable range is predetermined.

Use the A © buttons to select that particular button again.

ADJUST buttons. the row line and the MARKER moves in the up/down direction. However, the movable range is predetermined.

© Make adjustment by using the A vV <q >

The selected column line or row line (shown left is the column line) can be moved in the desired up/ down or right/left directions as applicable.

© Press the WRITING button (for storing and finish). WRITING is displayed and the adjustment data is stored. After the data is stored, the Game Board screen returns.

Page 89

12 -3 ADJUSTMENT OF MITSUBISHI PROJECTOR

S @ For the operation of Remote Control, use only the Keys of R/B, A (UP shift), <] (LEFT shift), W (DOWN shift), [> (RIGHT shift), TEST,

IMPORTANT! -, +,and PICTURE. Do not press keys other than those explained in this manual. @ When operating the Remote Control, have it point the screen.

The Projector has DYNAMIC CONVERGENCE adjustment functions. This manual does not refer to the functions as the adjustment of DYNAMIC CONVERGENCE is very troublesome and in addition, visual effects are negligible.

UP shift)KEY

} R/B KEY

_ RIGHT shift)KEY LEFT shift)KEY

aN

DOWN shift)KEY IE 0-8 ? i « 0:0 @ 8

Os TEST KEY +KEY 0: 0: =- PICTURE + I) MITSU@ISHI +KEY

PICTURE KEY

Page 90

*POWER KEY oo. eeeeceeee This does not have power ON/OFF function. Does not function even if it is pressed. ORB KEY oes Used to select "R" for red adjustment or "B" for blue adjustment in the STATIC CONVERGENCE ADJUSTMENT mode.

  • A (UP shift) KEY we Used to move the test cross upward in the STATIC CONVERGENCE ADJUSTMENT mode.
  • <{(LEFT shift) KEY «0.00.0... Used to move the test cross to the left in the STATIC CONVERGENCE ADJUSTMENT mode.
  • VW (DOWN shift)... Used to move the test cross downward in the STATIC CONVERGENCE ADJUSTMENT mode.

+ [> (RIGHT shift) KEY.......... Used to move the test cross to the right in the STATIC CONVERGENCE ADJUSTMENT mode.

*TEST KEY oo This is the ON/OFF key in the STATIC CONVERGENCE ADJUSTMENT mode. In the ON status of this key, the test cross pattern appears in the approximately on-screen center. *ENTER KEY ........ssesreoereenonses Used for DYNAMIC CONVERGENCE.

0 KEY occ Used to decrease the adjustment data in the adjustment mode of CON- TRAST, BRIGHTNESS, HORIZONTAL/VERTICAL POSITIONS and WIDTH.

++KEY.. . Used to increase the adjustment data in the adjustment mode of CON- TRAST, BRIGHTNESS, HORIZONTAL/VERTICAL POSITIONS and WIDTH.

¢PICTURE KEY ............seeeee Used for the ADJUSTMENT mode of CONTRAST, BRIGHTNESS, HORI- ZONTAL/VERTICAL POSITIONS and WIDTH. Every time this key is pressed, the ADJUSTMENT mode proceeds as follows:

NORMAL CONTRAST BRIGHTNESS H-POSI | OPERATION t—t>) ADJUSTMENT ADJUSTMENT }—#>| ADJUSTMENT MODE MODE MODE

V-HEIGHT V-POSI H-WIDTH ADJUSTMENT ADJUSTMENT }@—4 ADJUSTMENT }«d— MODE MODE MODE

EXPLANATIONS OF ADJUSTMENT MODES

*CONTRAST ..... cee Used to vary image contrast. Use + and - keys to adjust. *BRIGHTNESS ............. Used to change image brightness. Use + and - keys to adjust. *H-POSL ou. Used to move the image position in the horizontal direction. Use + and - keys to adjust. *H-WIDTH ...w. ee Used to change the horizontal width of image. Use + and - keys to adjust. OV-POSL oes Used to move the image position in the vertical direction. Use + and - keys to adjust. *V-HEIGHT......0.0 cee Used to change the vertical width of image. Use + and - keys to adjust.

.seuservice.com 83 ww

Page 91

STATIC CONVERGENCE ADJUSTMENT

Press the TEST KEY to change the screen to Red Line Adjustment mode.

Superimpose the red line on the green line. When the red line is superimposed on the green line, the green line turns to yellow or white.

To MOVE RED LINE: Use <] key to move it left. Use > key to move it right. Use A key to move it upward. Uscw key to move it downward.

Press the R/B KEY. Changes to the Blue Line Adjustment screen. Every time the key is pressed, "from red to blue" and "from blue to red" are alternated.

SUPERIMPOSING BLUE LINE ON GREEN LINE: Superimposing blue line on green line causes the green line to turn to white.

TO MOVE BLUE LINE: Use <] key to move it left. Use [> key to move it right. Use A key to move it upward. Use 'W key to move it downward.

Press the TEST KEY. Adjustment is finished. RED 31K H+75 V:-11

+

Cq <J Db A

Vv

Ca ed A

Vv

AUTOMATIC CANCELLATION OF ADJUSTMENT MODE

In each adjustment mode, only in the case where an effective key input (variation of values and images) is not performed within the time limit indicated below, the adjustment mode is automatically cancelled and finished, shifting to on-screen normal images.

Approximately 6 seconds

Approximately 5 min. CONTRAST BRIGHTNESS H-POSI H-WIDTH V-POSI V-HEIGHT

STATIC CONVERGENCE

Page 92
  • REPLACEMENT OF FLUORESCENT LAMP AND LAMPS

When performing work, be sure to turn power off. Working with power on can cause electric shock and short circuit hazards.

WARNING! The Fluorescent Lamp, when it gets hot, can cause burn. Be very careful

when replacing the Fluorescent Lamp.

Be sure to use lamps of the designated rating. Using lamps of undesignated rating can cause a fire or malfunctioning

rating can cause a fire or malfunctioning.

To perform work safely and securely, be sure to prepare a step which is in a secure and stable condition. Not using a step or using an unstable step can cause

CAUTION! violent falling down accidents.

REPLACING THE FLUORESCENT LAMP INSIDE THE BILLBOARD

® Turn off power.

® Turn off power Take off 3 Truss Screws to remove

the Sash.

M4 X 10

PHOTO 13a

When performing work, be sure to use a step.

Page 93

® Remove the Billboard Plate.

BILLBOARD PLATE

FL COVER

® Take off 2 Truss Screws to remove

FL Cover.

TRUSS SCREW (2)

PHOTO 13 ¢

FLUORESCENT LAMP 30W: 390-525 1-30-01

® Draw the Billboard Lid out GLOW BULB: 390-5638-1E of the cabinet © Replace the Fluorescent

of the cabinet.

Lamp and Glow Lamp.

PHOTO 13d

Page 94

REPLACING THE REVOLVING LIGHT LAMP COVER

® Turn off power.

® Turn off power @ Take off 5 Truss Screws to

remove the Lamp Cover.

AOL IEIC TRUSS SCREW (5) \

® Replace the Lamp with the spare inside the Revolving Light.

LAMP 120V 40W, 390-6648

LAMP(Spare)

PHOTO 13 f

Page 95

REPLACING THE START BUTTON

When the COIN SETTING is changed, remove the SW Plate by referring to the following procedures and replace the DENOMI SHEET attached to the Plate.

® Turn off power.

@ Take off 2 Truss Screws.

TRUSS SCREW (2) M4X10

® Remove the SW Plate from the

Cabinet. At this time, use care so as not to damage the wire.

@ Grasp the both sides of the SW © Pull the Lamp straight out from

and pull it from the Button.

the SW and replace. SW PLATE

FIG. 13a

LAMP 6V 3W 390-5160

FIG. 13b

Page 96
  • PERIODIC INSPECTION TABLE

The items listed below require periodic check and maintenance to retain the performance of this machine and to ensure safe business operation. When handling the controller, the player will be in direct contact with it . In order to always allow the player to enjoy the game, be sure to clean it regularly. Also, it is advisable to provide wet tissue, etc. available for player use.

@ Be sure to check once a year to see if Power Cords are damaged, the plug is

securely inserted, dust is accumulated between the Socket Outlet and the

WARNING! Power Plug, etc. Using the product with dust as is accumulated can cause fire and electric shock hazards. Periodically once a year, request the place of contact herein stated or the Distributor, etc. where the product was purchased from, as regards the internal cleaning. Using the product with dust as is accumulated in the interior

without cleaning can cause a fire or accident. Note that cleaning the interior parts can be performed on a pay-basis

parts can be performed on a pay-basis.

TABLE 14

ItemIntervalReference
CABINETCheck Adjusters'contact with surface.Daily3
CONTROLLERCleaningAs necessary
Sight checkWeekly9,10
Check SWes.Monthly9,10
COIN CHUTE DOOR | Check COIN SW.Monthly9
Coin insertion test.Monthlyll
Cleaning of COIN SELECTOR.Trimonthlyll
PROJECTORSCREEN cleaning.Weekly12-1
Check adjustments.Monthly or when moving.6, 9,12

GAME BD MEMORY TEST. Monthly 9

Check settings.Monthly9
INTERIORCleaningAnnuallySee above.

POWER SUPPLY PLUG Inspection and cleaning

Cabinet surfacesCleaningAs necessary.See below.

CLEANING THE CABINET SURFACES

When the cabinet surfaces are badly soiled, remove stains with a soft cloth dipped in water or diluted (with water) chemical detergent and squeezed dry. To avoid damaging surface finish, do not use such solvents as thinner, benzine, etc. or abrasives, bleaching agent and chemical dustcloth.

wwt .seuservice.com

Page 97
  • TROUBLESHOOTING
WARNING! e @ In order to prevent electric shock and short circuit, be sure to turn power off before performing work. Be careful so as not to damage wirings. Damaged wiring can cause electric shock or short circuit. After removing the cause of the functioning of the Circuit Protector, reinstate

the Circuit Protector. Depending on the cause of the functioning, using the

Circuit Protector as is without removing the cause can cause generation of heat and fire hazard.

In case a problem occurs, first check wiring connector connections.

TABLE 15a

PROBLEMS CAUSE COUNTERMEASURES

With Main SW Power is not supplied. Securely insert the power plug into the plug ON, no activation.

Power supply/voltage is not correct.

The Circuit Protector functioned due to the momentary overload. socket.

Make sure that power supply/voltage is correct.

After eliminating the cause of overload, reinstate the AC Unit's Circuit Protector (see 4 , Section 6, Refer to the following).

The color on PTV screen is incorrect. Image adjustment is inappropriate. Adjust appropriately (see Sec.12).

Color deviation on PTV screen. Affected by peripheral machines or the building's steel frames. Perform convergence adjustment (see Sec. 12).

Change installation direction or position.

Move the machine which causes the problem.

CIRCUIT PROTECTOR

CIRCUIT PROTECTOR &

FIG. 15a Functions due to the activation of bimetal. To restore the function, wait for approximately one minute or longer until the bimetal cools off. (Press the Button.)

Page 98

TABLE 15b

the Controller is not operable for shooting. Malfunctioning of Sensor BD. PROBLEMS CAUSE COUNTERMEASURES

No sound isSound volume adjustment is notAdjust sound volume (see Sec. 9).

emitted. appropriate.

Board and Amplifier malfunctioning. | Perform the sound test and confirm (see Sec. 9).

ControllerDue to environmental changes, etc.,Perform sighting adjustment in the test
sighting is notsighting became inappropriate.mode (see Sec. 9).

satisfactory. LED BD malfunctioning. Check to ensure that the LED lights up. If it does not light up, replace (see next page).

Sensor Unit malfunctioning. Replace the Sensor Unit (see Sec.10).

LED BD, Front Glass, and Mirror are} Wipe off soiled surfaces (see Sec. 14 and soiled. next page).

During game play, | Malfunctioning of microswitch. Check for ON and OFF in the INPUT test and if it is not functioning, replace the microswitch (see Sec. 10).

Replace the Sensor BD (see Sec. 10).

The Fluorescent lamp does not light up. The Fluorescent tube is burnt out. Replace the Fluorescent tube (see Sec. 13).

The Lamp does not light up. Lamp malfunctioning. Replace the Lamp (see Sec. 13).

wwt .seuservice.com

Page 99

REPLACEMENT OF LED BD Cy Q e Cy

If the LED emitting 2 lights can not be seen, fault or malfunctioning may be considered. Replace the LED by referring to the following procedures. Also refer to the following procedures when cleaning the surface of the LED. When performing work, use care so as not to damage the wiring.

® Turn off power.

Take off 2 screws which secure the , 7 Billboard and slide the Billboard to the backward of the PTV. . If light emission from the 2 LED's |

the backward of the PTV ® Take off total of 2 screws which can not be seen, replace. J

secure the Mask. Take off a screw for FIG. 156 each from the both sides of the PTV. .

® Total of 10 LED boards are inside the Mask. The wiring in the PTV Cabinet is directly connected to the LED Board in the lower Mask. Disconnect the connector connected to the LED Board in the lower Mask to remove the Mask from the PTV. Be careful so as not to drop the wiring from the PTV Cabinet to the Cabinet inside at this time.

® Disconnect the both ends' connectors from the malfunctioning LED Board. Note that since the 10 LED Boards' wiring are linked together, the connector which connects to the head of connected LED Board is only one.

LED BD U NUT (2)

© Take out 2 U Nuts to 838-13145-02 | || M3,plastic washer used. remove and replace the \ {| LED Board.

Disconnect the connector here.

FIG. 15c¢

Page 100
  • GAME BOARD

A

WARNING!

A In order to prevent electric shock and short circuit hazards, be sure to turn power off before performing work. Be careful so as not to damage wirings. Damaged wiring can cause fire, electric shock and short circuit hazards. Do not expose the Game BD, etc. without a good reason. Failure to observe this can cause electric shock hazard or malfunctioning.

The electronic parts on the IC Board could be damaged due to human body's static electricity. Before performing IC Board related work, be sure to discharge

CAUTION! physically accumulated statics by touching grounded metallic surfaces, etc.

Put the Game Board in the Carton Box (an accessory) together with the Shield Case when requesting for the replacement or repair. Transporting the Game NPORTANE Board in an undesignated status for replacement/repair is unacceptable. ‘ In this manual, how to remove the Game Board is explained for convenience. However, this work should be performed by SEGA SERVICEMAN.

16 - 1 REMOVING THE GAME BOARD TRUSS SCREW (2) > M4 X20

® Turn off power.

@ Take off 2 screws from the PTV Unlock. Cabinet to unlock and remove the ~ o Upper LID. .

® Take off 2 screws from the PTV Cabinet to remove the Lower LID. Take off 3 screws

UPPER LID

SCREW (2) M4 X 25.w/flat & spring washer

LOWER LID

to remove Shield Case Lid, and the Game Board appears. This work should never be performed by those other than Sega Serviceman. FIG. 16. la

Page 101

@) Disconnect all connectors connecting to the Filter Board of Shield Case.

© Take off 4 screws which secure the Shield Case to the Base (wooden base) and take out Shield Case from the Cabinet.

© Take off 2 screws for each and remove 2 Shield Case Brackets from the Shield Case. Pack up the Shield Case with packing materials, put it into a carton box, and request service.

SHIELD CASE BRACKET SCREW (4) \ \ M4 X 16,wiflat & ring washers Disconnect all of the wiring connectors.

as

Va SHIELD CASE LID

SCREW (3) \ M4 X 8,w/flat & spring washers

SHIELD CASE

FIG. 16.1b

Page 102

16 - 2 COMPOSITION OF GAME BOARD

GAME BD FRQ ( 833-13783 )

SCREW (2) M3 X 30,w/flat & spring washers

SCREW (3) \ M3 X 50.w/flat & spring washers \

FLANGE NUT (8)

ROM BD FRQ 834-13784

MAIN BD SEGA HIKARU 834-13821

BD TRAY FOR SEGA HIKARU 105-5380

FIG. 16.2

Page 103
  • DESIGN RELATED PARTS

For the Warning Display stickers, refer to Section 1.

© OO

@ FRQ-1203@ FRQ-2512@ FRQ-1062
BILLBOARD PLATESTICKER WEIGHTSTICKER LID LOWER
@ FRQ-1205@ FRQ-1374@ FRQ-1357
FL COVERSTICKER PIPE LSTICKER PANEL
@ FRQ-1210@ FRQ-1382G@ FRQ-1309
STICKER BILL LSTICKER PIPE RDESIGN PLATE

@ FRQ-1211 @ FRQ-1355-01 STICKER BILL R INSTR PLATE ENG @ FRQ-1111 @ FRQ-1003 STICKER PTV SIDE L STICKER CABIL Q FRQ-1112 @ FRQ-1004 STICKER PTV SIDE R STICKER CABI R FRQ-1052 @ FRQ-2002 STICKER LID UPPER SW PLATE

Page 104

(D-1/2)

  • PARTS LIST @) Top Assy FRQ

; ) ; ape i \ _

©

ie + OE ip) ie

al

Page 105

() Top Assy FRQ

ITEM NO. PART NO.

FRQ-1000 FRQ-1100 FRQ-1300 FRQ-0001 FRQ-0002 421-10042 ~ SGM-4346 440-WS0033XEG 440-WS0002XEG FRQ-0003 421-8885 421-8479-01 FRQ-0004 440-CS0173-EG 440-CS0175-EG

030-000840-SB 068-852216-0B 000-T00530-0B 030-000820-SB 068-552016-0B 000-P00408-W 000-T00412-0B 068-441616-0B 000-T00412-0B

601-6604-70 SGM-2675 420-6478-01 390-5160 600-6729 600-6695 600-6618 SGM-4111 220-5576 280-5009-01

GPD-0002X 421-8740 421-6690-06 421-6690-01 421-6690-03 421-6690-05

421-6119-91 421-6120-91 (D-2/2)

DESCRIPTION NOTE

ASSY CABINET ASSY PTV ASSY CONTROL CABI JOINT BRKT L JOINT BRKTR DENOMI SH 1IGAME ~ POLY COVER 1200 X 1200 X 1300 STICKER W BD POWER OFF ENG. STICKER W POWER OFF ENG. GUARD BRKT STICKER CAUTION FORK STICKER INSTR SUNLIGHT ENG INFO PLATE STICKER C PLAYPIPE ENG STICKER C EPILEPSY ENG

HEX BLT W/S BLK M8 X 40 FLT WSHR BLK 8.5-22 X 1.6 MSCR TH BLK M5 X 30 HEX BLT W/S BLK M8 X 20 FLT WSHR BLK 5.5-20 X 1.6 M SCR PH W/FS M4 X 8 MSCR TH BLK M4 X 12 FLT WSHR BLK 4.4-16 X 1.6 MSCR TH BLK M4 X 12

CARTON BOX 70 POLYETHYLENE BAG, 240 X 370 OWNERS MANUAL FRQ ENG LAMP WG B TYPE 6V 3W AC CABLE CONNECT TYPE 15A AC 110V AREA AC CABLE CONNECT TYPE USA ISA _— AC 120V AREA AC CABLE CONNECT TYPE FOR EXP = AC 220 ~ 240V AREA KEY BAG (SGB-1035X) KEY MASTER FOR 220-5575 CORD CLAMP 21

SHIPPING BRKT

CAUTION INSTR COP U/R STICKER 110V AC 110V AREA STICKER 120V AC 120V AREA STICKER 220V AC 220V AREA STICKER 240V AC 240V AREA

STICKER FCC STICKER SEGA USA | USA

Page 106

(@) ASSY CABINET (FRQ-1000) (D-1/2)

Page 107
  • ASSY CABINET (FRQ-1000)

ITEM NO. PART NO.

1 FRQ-1001 2, FRQ-1020 3 FRQ-1070 4 FRQ-4000 5 FRQ-4100 6 FRQ-1005 7 FRQ-1006 8 FRQ-1007 9 FRQ-1008

201 000-T00416-0C 202 000-F00416 203 000-T00420-0B 204 068-552016 206 000-P00530-S 207 050-F00400 208 000-P00416-W (D-2/2)

DESCRIPTION NOTE

ASSY SUB-CABI AC UNIT ASSY SPEAKER ASSY MAIN BD ASSY PWR SPLY SPEAKER COVER L SPEAKER COVER R SPEAKER NET L SPEAKER NET R

MSCR TH CRM M4 X 16

M SCR FH M4 X 16 MSCR TH BLK M4 X 20 FLT WSRR 5.5-20 X 1.6 MSCR PH W/S MS X 30 FLG NUT M4 M SCR PH W/FS M4 X 16

Page 108

G) ASSY SUB-CABI (FRQ-1001) (D-1/2)

Page 109
  • ASSY SUB-CABI (FRQ-1001)

ITEM NO. PART NO.

1 FRQ-1050 2, FRQ-1060 3 HOD-1530 4 FRQ-1002 5 FRQ-1009 6 FRQ-1010 7 FRQ-1011 8 FRQ-1012 9 HOD-1003 10 253-5460-01 11 601-5699X 12 117-5284 13 601-9377 14 253-5396-91 15 FRQ-1003 16 FRQ-1004

101 280-5009-01 102 280-0419 103 601-0460

201 030-000830-SB 202 011-F00310 203 011-T03512 204 068-852216-0B 205 000-T00416-0C 206 000-P00420-W 207 000-T00420-0B 208 030-000630-SB 209 050-F00400 210 030-000616-SB 211 050-H00400 212 060-S00400 213 060-F00400 214 050-H01600

301 FRQ-60003X 302 FRQ-60004 303 FRQ-60010 304 HOD-60024 305 FRQ-60027 306 FRQ-60028 307 600-6743-150 308 600-7141-200 309 FRQ-60048 (D-2/2)

DESCRIPTION NOTE

ASSY LID UPPER ASSY LID LOWER FAN UNIT PTV CABINET LEG CASTER BRKT A JOINT BRKT HOLDER BRKT LEG CASTER BRKT B LOCKING BRKT HOD AIR VENT BLACK LEG ADJUSTER BOLT M16 X 75 PLATE 6-80 BLACK CASTER FAI=75 CABINET HANDLE STICKER CABI L STICKER CABIR

CORD CLAMP 21 HARNESS LUG PLASTIC TIE BELT 100 MM

HEX BLT W/S BLK M8 X 30 TAP SCR FH 3 X 10 TAP SCR TH 3.5 X 12 FLT WSHR BLK 8.5-22 X 1.6 MSCR TH CRM M4 X 16 M SCR PH W/FS M4 X 20 MSCR TH BLK M4 X 20 HEX BLT BLK W/S M6 X 30 FLG NUT M4 HEX BLT W/S BLK M6 X 16 HEX NUT M4 SPR WSHR M4 FLT WSHR M4 HEX NUT M16

WIRE HARN FRONT CABIO1 WIRE HARN FRONT CABI02 WIRE HARN FRONT CABIO03 WIRE HARN FRONT CABI04 WIRE HARN E FRONT CABIO1 WIRE HARN E FRONT CABI02 ASSY RGB CABLE 150CM CABLE JVS TYPE A-B 200CM WIRE HARN E FRONT CABI03

Page 110

G) ASSY LID UPPER (FRQ-1050)

\

ITEM NO. PART NO. DESCRIPTION NOTE 1 FRQ-1051 LID UPPER

2FRQ-1052STICKER LID UPPER
3TH-1015LOCKING TONGUE
101220-5575CAM LOCK MASTER W/O KEY
Page 111
  • ASSY LID LOWER (FRQ-1060)

ITEM NO. PART NO. DESCRIPTION NOTE

1FRQ-1061LID LOWER
2FRQ-1062STICKER LID LOWER
3FRQ-1063LID BRKT
201050-F00400FLG NUT M4
Page 112

©) FAN UNIT (HOD-1530)

ITEM NO. PART NO. DESCRIPTION NOTE

1105-5340-01FAN BRKT LONG
101260-0011-02AXIAL FLOW FAN AC100V 50-60HZ

102 601-8543

103280-5275-SR10CORD CLAMP SR10
201000-P00312-WM SCR PH W/FS M3 X 12
Page 113

@) ASSY SPEAKER (FRQ-1070)

ITEM NO. PART NO. DESCRIPTION NOTE

1FRQ-1071SPEAKER BRKT
101130-5096ASSY SERVO SPEAKER BOX
102280-0425CORD CLAMP 10
201000-P00512-WM SCR PH WIFS MS X 12
301HOD-60025WIRE HARN SPEAKER UNIT
Page 114

AC UNIT (FRQ-1020)

ITEM NO.

RON ‘oO

)—__]

a

oo

PART NO.

HOD-1021X 421-7468-02 421-8202 421-9108

280-0417 270-5081 450-5126 450-5134 450-5135 509-5453-91-H-B 214-0202 512-5046-10000 512-5046 310-5029-G20 280-5009 280-5009-01 601-0460 280-5275-SR10

000-P00408-W 000-P00416-W

HOD-60023 600-691 1-048 600-691 1-049 600-691 1-050 fe)

DESCRIPTION

AC BRKT STICKER C.P W/PIC STICKER EARTH MARK STICKER AC IN

TERMINAL BINDING POST BLACK NOISE FILTER 20A MAGNET CONTACT S-N10CX MAGNET CONTACT S-10CX AC230V MAGNET CONTACT S-10CX AC120V SW ROCKER J8 H-B AC INLET PANEL TYPE C.P 10000MA CE UL C.P 5000MA CE UL SUMITUBE F G 20MM CORD CLAMP 21 CORD CLAMP 21 PLASTIC TIE BELT 100 MM CORD CLAMP SR10

M SCR PH W/FS M4 X 8 M SCR PH W/FS M4 X 16

WIRE HARN AC UNIT IN WIRE HARN AC UNIT SW WIRE HARN AC UNIT NOISE FILTER WIRE HARN AC UNIT OUT AC 110V AREA AC 220 ~240V AREA AC 120V AREA

AC 110 ~ 120V AREA AC 220 ~240V AREA

Page 115

(@) ASSY PTV (FRQ-1100)

° ° °

ITEM NO. PART NO.

1 FRQ-1150 2 FRQ-1200 3 FRQ-1110 4 HOD-1101 5 FRQ-1113 6 FRQ-1114

201 000-T00520-0B 202 000-F00412 203 000-T00525-0B 204 000-P00516-W 205 068-552016-0B (om)

DESCRIPTION NOTE

ASSY MASK ASSY BILLBOARD PTV W/STICKER FRQ PTV HOLDER MASK BRKT LOWER MASK BRKT UPPER

MSCR TH BLK M5 X 20 M SCR FH M4 X 12 MSCR TH BLK MS X 25 M SCR PH W/FS MS X 16 FLT WSHR BLK 5.5-20 X 1.6

Page 116

({0) PTV W/STICKER FRQ (FRQ-1110)

ITEM NO. PART NO. DESCRIPTION NOTE

1FRQ-1111STICKER PTV SIDEL
2FRQ-1112STICKER PTV SIDER
101200-5788-31PROJECTION DSPL T SOTYPE 31K,

200-5799-31 PROJECTION DSPL M SOTYPE 31K

Page 117
  • ASSY MASK (FRQ-1150)

ITEM NO. PART NO.

1 FRQ-1151 2 JPT-1082

101 838-13145-02 102 280-5275-SR10 103 280-5008

201 050-U00300 202 068-330808-PN 203 050-H00400 204 060-F00400 205 060-S00400 206 069-000026

301 HOD-60011 302 HOD-60013 303 HOD-60014 304 HOD-60035

DESCRIPTION NOTE

MASK BASE IR COVER

LED BD GUN SENSE HOD CORD CLAMP SRI10 CORD CLAMP 15

U NUT M3 FLT WSHR PLASTIC 3.3-8 X 0.8 HEX NUT M4 FLT WSHR M4 SPR WSHR M4 FLT WSHR 3.2-11 X 0.5

WIRE HARN MASKO1 WIRE HARN MASKO03 WIRE HARN MASK04 WIRE HARN E MASKOI

Page 118

(D-1/2)

(2) ASSY BILLBOARD (FRQ-1200)

Page 119
  • ASSY BILLBOARD (FRQ-1200) (D-2/2)

ITEM NO. PART NO.

FRQ-1250 FRQ-1201 FRQ-1202X FRQ-1203 FRQ-1204 FRQ-1205 FRQ-1206 FRQ-1207 FRQ-1208 FRQ-1209 FRQ-1210 FRQ-1211 253-5457 421-7501-09 440-WS0002XEG 440-WS0012XEG

280-5009 280-5009-01 390-5637-30EX 390-5538-30EX 390-5636-30EX 280-5275-SR10

000-T00410-0C 000-P00412-W 000-P00425-W 050-H00400 060-S00400 060-F00400

FRQ-60009 FRQ-60045 600-6295-04 DESCRIPTION NOTE

LAMP UNIT BILLBOARD BOX BILLBOARD LID BILLBOARD PLATE LAMP COVER FL COVER MIRROR A MIRROR B MIRROR C SASH STICKER BILL L STICKER BILL R FL HOLDER STICKER FL30W STICKER W POWER OFF ENG. STICKER W HIGH TEMP ENG

CORD CLAMP 21 CORD CLAMP 21 ASSY FL30W EX W/CONN HIGH T ASSY FL30W EX W/CONN HIGH L ASSY FL30W EX W/CONN HIGH S CORD CLAMP SRI10

MSCR TH CRM M4 X 10 M SCR PH W/FS M4 X 12 M SCR PH W/FS M4 X 25 HEX NUT M4 SPR WSHR M4 FLT WSHR M4

WIRE HARN BILLBDO1 WIRE HARN BILLBD02 WIRE HARN AC SKT WH

Page 120
  • LAMP UNIT (FRQ-1250)

ITEM NO. PART NO. DESCRIPTION NOTE

1FRQ-1251UNIT BRKT
101390-6639PATLITE UNIT KP-100
201050-U00800U NUT M8
202060-F00800FLT WSHR M8
Page 121

(D-1/3)

ASSY CONTROL CABI (FRQ-1300)

Page 122

ASSY CONTROL CABI (FRQ-1300) (D-2/3)

ITEM NO. PART NO.

FRQ-1350 FRQ-1360 FRQ-1370 FRQ-1380 FRQ-1390 FRQ-2000 FRQ-2500 FRQ-4300 RCT-1040 FRQ-1301 FRQ-1302 FRQ-1303 FRQ-1304 FRQ-1305 FRQ-1306 FRQ-1307 FRQ-1308 FRQ-1309 FRQ-1310 FRQ-1311 253-5366 DP-1167 105-5171 105-5172 FRQ-1356 601-5525-188 421-7501-02 440-WS0002XEG 421-8885

220-5482-91 ~ 220-5237-92 ~ 220-5575 220-5574 280-5009 310-5029-F20 280-5275-SR10 220-5727

000-T00412-0B 000-T00412-0C 000-P00408-W 030-000616-SB 060-F00600-0B 000-P00412-W 068-441616-0C 000-P00425-W 050-F00400 000-P00406-S 030-000820-SB 068-852216-0B 000-T00408-0C 028-A00406-P DESCRIPTION NOTE

ASSY CONTROLLER PANEL L ASSY CONTROLLER PANEL R ASSY SIDE PIPE L ASSY SIDE PIPER METER UNIT ASSY CONTROL TOP COVER ASSY PLAY PIPE ASSY I/O CONTROL SW UNIT CONTROL CABI BASE TOWER HYDRANT SIDE COVER L. HYDRANT SIDE COVER R CENTER LID SIDE LID L SIDE LIDR PANEL LID DESIGN PLATE INNER HOSE BRKT A INNER HOSE BRKT B CASH BOX TNG LKG CHUTE PLATE SINGLE OTHERS CHUTE PLATE DOUBLE USA SHOULDER PIN BUSH 1.2T 188MM STICKER 6.3V 0.15A STICKER W POWER OFF ENG STICKER CAUTION FORK.

ASSY C.C 2DR ~ ASSY C.C 2DR ~ CAM LOCK MASTER W/O KEY CAM LOCK W/KEYS CORD CLAMP 21 SUMITUBE F F 20MM CORD CLAMP SR10 CASH DOOR BRKT

M SCR TH BLK M4 X 12 M SCR TH CRM M4 X 12 MSCR PH W/FS M4 X 8 HEX BLT W/S BLK M6 X 16 FLT WSHR BLK M6 M SCR PH W/FS M4 X 12 FLT WSHR CRM 4.4-16 X 1.6 M SCR PH W/FS M4 X 25 FLG NUT M4 MSCR PH W/S M4 X 6 HEX BLT W/S BLK M8 X 20 FLT WSHR BLK 8.5-22 X 1.6 M SCR TH CRM M4 X 8 SET SCR HEX SKT CUP P M4 X 6

Page 123

ASSY CONTROL CABI (FRQ-1300)

ITEM NO. PART NO.

FRQ-60016 FRQ-60017 FRQ-60018 600-6455-02 600-7134 600-6709-52 600-6709-54 DESCRIPTION

WIRE HARN CONTROL CABIO1 WIRE HARN CONTROL CABI02 WIRE HARN CONTROL CABI03 WIRE HARN C.C DOOR SINGLE WIRE HARN COIN CHUTE 2 WIRE HARN EARTH 400MM WIRE HARN EARTH 150MM (D-3/3 )

NOTE

OTHERS USA

Page 124

(5) ASSY CONTROLLER PANEL L (FRQ-1350)

  • REPLACEMENT PARTS MAY DIFFER FROM ORIGINAL ON GAME

ITEM NO. PART NO.

FRQ-1351 FRQ-1352 FRQI-1362-01 FRQ-1354 FRQ-1355-01 FRQ-1357 FRQ-1358 CHOIDARWNH FRQ-1359

101 280-5009 280-5009-01

201 000-T00410-0C

DESCRIPTION NOTE

MAIN PANEL L PANEL PLATE KIT IMPROVED SMALL HOSE WTIH CONVERTER, HOSE PLATE INSTR PLATE ENG STICKER PANEL GUARD RUBBER ASSY HOSE-SEE BRAVE FIREFIGHTER HOSE ASSY GUARD STICKER

CORD CLAMP 21 CORD CLAMP 21

M SCR TH CRM M4 X 10

Page 125

ASSY CONTROLLER PANEL R (FRQ-1360)

  • REPLACEMENT PARTS MAY DIFFER FROM ORIGINAL ON GAME

ITEM NO. PART NO. DESCRIPTION NOTE

1FRQ-1361MAIN PANEL R

2 FRQ-1352 PANEL PLATE

*3FRQI-1362-01KIT IMPROVED SMALL HOSE WTIH CONVERTER
4FRQ-1354HOSE PLATE
5FRQ-1355-01INSTR PLATE ENG

6 FRQ-1357 STICKER PANEL

7FRQ-1358GUARD RUBBER

*8 ASSY HOSE-SEE BRAVE FIREFIGHTER HOSE ASSY

9FRQ-1359GUARD STICKER
101280-5009CORD CLAMP 21

280-5009-01 CORD CLAMP 21

201000-T00410-0CMSCR TH CRM M4 X 10-Manual
Page 126
  • ASSY SIDE PIPE L (FRQ-1370)

\S

ITEM NO.

RWNe PART NO.

FRQ-1371X FRQ-1372 FRQ-1373 FRQ-1374

601-6076

000-T00412-0B 000-T00406-0B DESCRIPTION

SIDE PIPE L HOLDER A HOLDER B STICKER PIPE L.

LEG ADJUSTER 32

M SCR TH BLK M4 X 12

M SCR TH BLK M4 X 6

NOTE
Page 127
  • ASSY SIDE PIPE R (FRQ-1380)

: >|

+ +

et [ef te

Ky

s

ITEM NO. PART NO. DESCRIPTION NOTE

1FRQ-1381XSIDE PIPER
2FRQ-1372HOLDER A
3FRQ-1373HOLDER B
4FRQ-1382STICKER PIPE R
101601-6076LEG ADJUSTER 32
201000-T00412-0BM SCR TH BLK M4 X 12
202000-T00406-0BMSCR TH BLK M4 X 6
Page 128

METER UNIT (FRQ-1390)

ITEM NO. PART NO. DESCRIPTION NOTE

1FRQ-1391METER BRKT
2421-6591-01STICKER COIN METER

3 HOT-1007 LID COIN CNTR OTHERS

NOT USED USA

101220-5643-01MAG CNTR DCSV 6P WH MZ-674-D04
201000-P00308-WM SCR PH W/FS M3 X 8OTHERS

NOT USED USA

/220-5617-02MAG CNTR DCS5V W/CONN 6P YEUSA
/220-5643-02MAG CNTR DCSV 6P YE MZ-674-D05
Page 129

ASSY CONTROL TOP COVER (FRQ-2000)

ITEM NO.

2, PART NO.

FRQ-2001 FRQ-2002

509-5610-03 YE 280-5275-SR10

000-T00410-0C

HOD-60020

DESCRIPTION NOTE

HYDRANT TOP COVER SW PLATE

SW PB 30M YELLOW W/L WH 5V 3W CORD CLAMP SRI10

MSCR TH CRM M4 X 10

WIRE HARN CONTROL PANEL

Page 130

@1) SW UNIT (RCT-1040)

ITEM NO. PART NO.

KR-1060 421-8126

509-5028 220-5179 601-0042 310-5029-F20 601-0460

600-6568-53 DESCRIPTION NOTE

SW BRKT STICKER SWITCH PANEL

SW PB IM VOL CONT B-5K OHM. KNOB 22 MM SUMITUBE F F 20MM. PLASTIC TIE BELT 100 MM

WIRE HARN SW UNIT

Page 131

(D-1/2) @2) ASSY PLAY PIPE (FRQ-2500)

Page 132

@2) ASSY PLAY PIPE (FRQ-2500)

ITEM NO.

CHOIDARWNHH as PART NO.

FRQ-2550 FRQ-2600 FRQ-2700 FRQ-2501 FRQ-2503 FRQ-2504 FRQ-2505 FRQ-2506 FRQ-2507 FRQ-2512 FRQ-2511

100-5344 280-5275-SR10

000-P00310-0B FAS-000059 FAS-000015 050-H00300-0B 028-A00306-P 000-P00308-W 060-S00300

FRQ-60021X (D-2/2)

DESCRIPTION NOTE

SW UNIT VIBRATION UNIT ASSY NOZZLE PLAY PIPE LID ACTION GRIP JOINT RING END RING RETURN SPRING STICKER WEIGHT STRAP

OILES 80B-2530 CORD CLAMP SR10

M SCR PH BLK M3 X 10 M SCR PH W/S BLK M4 X 14 M SCR PH BLK M3 X 25 HEX NUT BLK M3 SET SCR HEX SKT CUP P M3 X 6 M SCR PH W/FS M3 X 8 SPR WSHR M3

WIRE HARN PLAY PIPE EXT

Page 133

@3) SW UNIT (FRQ-2550)

SECTION A-A

  • REPLACEMENT PARTS MAY DIFFER FROM ORIGINAL ON GAME

ITEM NO. PART NO. DESCRIPTION NOTE

1FRQ-2502SW BASE
2FRQ-2551-USSW PLATE
*101FRQ-2552-USASSY - SW WITH HARNESS
102310-5029-D20SUMITUBE F D 20 MM
*103FRQS5-2552ASSY - SW WITH PLATE
201050-F00300FLG NUT M3
301FRQ-60041WIRE HARN TRIGGER
Page 134

VIBRATION UNIT (FRQ-2600)

ITEM NO. PART NO. DESCRIPTION

1 FRQ-2601 BEARING BASE

2FRQ-2602JOINT SHAFT
3FRQ-2603MOTOR SHAFT
4FRQ-2604MOTOR BRKT
101350-5599MOTOR TE-35BLL-12-32S
102601-10583COUPLING AL-035 6-5
201000-P00316-SM SCR PH W/S M3 X 16
202000-P00316-WM SCR PH W/FS M3 X 16
203029-0185M SCR PH M2.6 X 3
NOTE
Page 135

@5) ASSY NOZZLE (FRQ-2700)

(8) \ \

ITEM NO. PART NO.

1 FRQ-2701 2 FRQ-2702 3 FRQ-2703 4 FRQ-2704 5 FRQ-2705 6 FRQ-2706 7 FRQ-2707 8 FRQ-2708 9 FRQ-2030

102 5091-5912 103 310-5029-D20

201 000-F00312-0B 202 000-P00306-W 203 000-P00210 204 050-F00300

301 FRQ-60043 302 FRQ-60044 BQ N

SECTION A-A

DESCRIPTION

NOTE

NOZZLE CAP SENSOR BRKT BUSH SECURITY PLATE NOZZLE / WITH THREADED ROD INSULATION SHEET SECURITY HOOK SECURITY WIRE SENSOR UNIT

MICRO SW AH166461 SUMITUBE F D 20 MM

M SCR FH BLK M3 X 12 M SCR PH W/FS M3 X 6 M SCR PH M2 X 10 FLG NUT M3

WIRE HARN NOZZLE WIRE HARN SPRAY SW

Page 136

SENSOR UNIT (FRQ-2030) (D-13)

ITEM NO. PART NO. DESCRIPTION NOTE

1JPT-2031SENSOR HOLDER
101838-13144-02SENSOR BD GUN SENSE FRQ
201012-P00306TAP SCR #2 PH3 X6
Page 137

@7) ASSY 1/0 CONTROL (FRQ-4300)

( 204

10g) JOE

7 @

@| are) iz a

20, 105 101

ITEM NO. PART NO. DESCRIPTION NOTE

1FRQ-4301BD BASE
2837-13551-92I/O CONTROL BD FOR JVS
101601-10397-01SLIONTEC AL TAPE 8060 200 X 240
102270-5052-04L.FILTER D
103270-5117FERRITE CORE TDK ZCAT3035-1330
104838-13143-05IC BD GUN SENSE FRQ
105280-5009CORD CLAMP 21

280-5009-01 CORD CLAMP 21

106601-0460PLASTIC TIE BELT 100 MM
107280-0419HARNESS LUG
201011-P00325TAP SCR PH 3 X 25
202011-F00310TAP SCR FH 3 X 10
203011-T03512TAP SCR TH 3.5 X 12
301FRQ-60015WIRE HARN I/O CONTROLOI
302HOD-60040WIRE HARN FREQ.CHANGE
Page 138

ASSY MAIN BD (FRQ-4000)

00 ono00000 0000000 00000000" ooo00e0

boouso0 0080000 Qoo0so00 e0psne00

ITEM NO. PART NO.

1 FRQ-4001 2 FRQ-4200 3 105-5382

101 400-5397 102 601-10369 103 280-5009 280-5009-01 104 601-0460

201 000-P00416-W 202 011-F00310 203 000-P00408-W

301 FRQ-60005 302 FRQ-60006X 303 FRQ-60007 304 FRQ-60008X 305 FRQ-60047 a

DESCRIPTION NOTE

WOODEN BASE ASSY SHIELD CASE SHIELD CASE BRKT

SW REGU FOR JVS STEREO PWR AMP 47 CORD CLAMP 21 CORD CLAMP 21 PLASTIC TIE BELT 100 MM

M SCR PH W/FS M4 X 16 TAP SCR FH 3 X 10 M SCR PH W/FS M4 X 8

WIRE HARN MAIN BDO1 WIRE HARN MAIN BD02 WIRE HARN MAIN BD03 WIRE HARN MAIN BD04 WIRE HARN MAIN BD05

Page 139

ASSY SHIELD CASE (FRQ-4200)

ITEM NO. PART NO. DESCRIPTION NOTE

1833-13783GAME BD FRQ
2839-1079-01FLT BD SEGA HIKARU FRQ
3105-5378SHIELD CASE FOR SEGA HIKARU
4105-5379SHIELD CASE LID FOR SEGAHIKARU
5105-5381FLT BD BRKT FOR SEGA HIKARU
7421-9174STICKER CAUTION ANTISTATIC
8421-10023-AABSTICKER BD SERIAL NUMBER AAB
9421-10023-BAK.STICKER BD SERIAL NUMBER BAK.
10441-313783STICKER 833-13783
11601-10642CARTON BOX SEGA HIKARU
101260-0064FAN MOTOR DC12V
102280-5275-SR10CORD CLAMP SR10
201010-P00310-FS-TITE SCR PH W/F M3 X 10
202000-P00408-WM SCR PH W/FS M4 X 8
203000-P00325-WM SCR PH W/FS M3 X 25
301FRQ-60037WIRE HARN FAN SHIELD CASE
Page 140

ASSY PWR SPLY (FRQ-4100)

ITEM NO. PART NO.

1 FRQ-4101

101 838-11855 103 280-5009 280-5009-01

201 011-P00325 202 011-F00310 / 000-P00616

301 FRQ-60001

/ HOD-60038 / HOD-60039 / 560-5384 / 560-5377 DESCRIPTION

NOTE

PWR SPLY BASE

SSR,CONN BD CORD CLAMP 21 CORD CLAMP 21

TAP SCR PH 3 X 25 TAP SCR FH 3 X 10 M SCR PH W/FS M6 X 16

WIRE HARN PWR SPLYO1

WIRE HARN XFMR IN WIRE HARN XFMR OUT XFMR 100-120V 100V 10A WB PWR XEMR 200-240V 100V 10A CE AC 110 ~ 120V AREA AC 220 ~240V AREA

Page 141

G1) BRAVE FIRE FIGHTER HOSE ASSY *

PLAY PIPE SHOWN FOR REFERENCE ONLY

FRQI-25 14-03

KITB USE EXISTING FITTING FROM OLD HOSE ASSY REPLACE ONLY IF NECESSARY

  • REPLACEMENT HOSE MAY DIFFER FROM ORIGINAL ON GAME

ITEM NO. PART NO. DESCRIPTION NOTE

999-1300 COMPRESSION FITTING 999-1929 MOD 1 1/2” - 1 1/4” ELBOW FITTING FRQI1-2514-03 HOSE FRQS5-2514-03 HOSE ASSY (INCLUDES 999-1929 KIT A)

Page 142
  • WIRE COLOR CODE TABLE

THE WIRE COLOR CODE is as follow:

A PINK B SKY BLUE

Cc BROWN

D PURPLE E LIGHT GREEN

Wires other than those of any of the above 5 single colors will be displayed by 2 alphanumeric characters.

RED

BLUE YELLOW GREEN WHITE

ORANGE BLACK GRAY Cord uneEwWne

If the right-hand side numeral of the code is 0, then the wire will be of a single color shown by the left-hand side numeral (see the above).

Note 1: If the right-hand side alphanumeric is not 0, that particular wire has a spiral color code. The left-hand side character shows the base color and the right-hand side one, the spiral color.

<Example> 51.0... WHITE / RED

NON OX

RED WHITE

Note 2: The character following the wire color code indicates the size of the wire.

U: AWG16, UL1015 K: AWGI18, UL1015 L: AWG20, UL1007 ‘None: AWG22, UL1007

Page 143

Warranty

Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating conditions. No other product in this machine is hereby covered.

Sellers sole liability in the event a warranted part described above fails shall be, at its option, to replace or repair the defective part during the warranty period. For Warranty claims, contact your Sega Distributor.

Should the Seller determine, by inspection that the product was caused by Accident, Misuse, Neglect, Alteration, Improper Repair, Installation or Testing, the warranty offered will be null and void.

Under no circumstances is the Seller responsible for any loss of profits, loss of use, or other damages.

This shall be the exclusive written Warranty of the original purchaser expressed in lieu of all other warranties expressed or implied. Under no circumstance shall it extend beyond the period of time listed above.

Page 144

SEGA ENTERPRISES, INC. (USA)

45133 Industrial Drive Fremont, CA 94538 (415) 701-6580 phone (415) 701-6594 fax