CATHODE RAY TOMES

Ikari 3

Ikari III - The Rescue (World version 1, 8-Way Joystick) (SNK, 1989) · Document · 17 pages · 5 sections · original scan

Page 1

_GAME brane

Page 2

WARRANTY POLIC

SNK Corporation of America (Seller) warrants to the original purchaser (Buyer) that the components listed below are free from defects in manufacturing and materials. The warranty period is 90 days, effective the date of original shipment from Seller's factory.

GAME CPU PCB(S)..........eeeeee se eeeeeee 90 days POWER SUPPLY SWITCHING REGULATOR..........90 days MONITOR ASSEMBLY.......seceeeeeeceeeeees e190 days

No other parts of Seller's product are covered hy this warranty.

The Seller's sole responsibility shall be, at it's option, to repair or replace any warranted item found to be defective during the warranty period. The Buyer's responsibility shall be to notify the Seller of the defective material, and return it, freight pre-paid, to the place specified by the Seller.

Seller is not responsible for the cost of unauthorized repairs, loss of income, or any charges or losses incurred as a result of the use of this product. Seller does not warrant the suitability of it's product for a particular application.

This warranty ie not applicable for normal wear and tear. This warranty shall be void if inspection of the returned product indicates defect was caused by misuse, or if unauthorized repairs were attempted, or if the item was damaged due to improper handling, shipping, or customer negligence.

a INSIDE FRONT COVER &

Page 3

IKARI III, THE RESCUE

GAME MANUAL

MODELS HS-1 AND HS-5

TABLE OF CONTENTS

I. GENERAL INFORMATION

A. Set-up Instructions............. a B. Component Locations.....---.....-. Cc. Drawer Release Procedure..........

II. OPERATION INFORMATION

A. Game Play... ec cece e cece cc eee cece eee eect eee nee 25 B. Dip-Switch Options . Cc. Self-Test Information..... : wnat D. Rotary Joystick Information..........ceee eee eee ed

III. TECHNICAL INFORMATION

A. Replacement Parts List............ Seo 11 B. Wiring Diagram......... cc cece cece cece eee eee ee lB

Ikari III, The Rescue!™ ©1988 SNK Corporation of America 246 Sobrante Way Sunnyvale, CA. 94086

www. secnenrei on BOSD

Page 4

I. GENERAL INFORMATION

A. Set-Up Procedures.

ikari III, Tne Rescue™ is shipped assembled and ready for operation. The only assembly required is the installation of the four (4) Leg Levelers into the floor of the cabinet. These are shipped in the Cash Box. To install, lay the game onto it’s back or side to gain access to the underside. Thread each Leg Leveler into the holes in the floor of the cabinet. Restore the game back to a standing position and adjust the Leg Levelers until the cabinet stands vertical and cannot rock. Secure them by tightening the Hex Nut.

Remove the power cord from the inside of the game and plug into the proper electrical outlet. This game is configured for U.S. 117 VAC, 60 Hz operation. For safe operation, you must use a grounded 3-conductor electrical outlet. Do not remove the ground terminal on the line cord.

At this point, the game is ready to operate, however you may want to alter the dip-switch options or sound volume to suit the location. Refer to Figure 1 for the location of these controls. The Dip-Switch table can be found on page 6 of this manual.

There are two LEDS on the PCB that indicate the rcB is getting +5 and +12 vdc, they do not indicate the proper level of the +5 vdc. The +5 vdc level has been pre-set at the factory, and should be adjucted to +4.90 to +5.15 vde.

SUB PCS CPU PCB ze

Figure 1

IKART 111, THE RESCUE PAGE 1 www. besementarcade on dae

Page 5

B. Component locations. This game is supplied in both the Dynamo HS-1 cabinet and the HS-5 cabinet. The HS-1 cabinet utilizes a 19" monitor, while the HS-5 uses a 25" monitor and Dynamo’s works-in-a-drawer system. Please refer to Figure 2 for major component locations.

<p = BF-

AONITOR 2s" v-G

x VEZ FUSE,

EBiNrer

a HS-

Figure 2

PAGE 2

“aa www. basementarcade com G4 IKARI IIL, THE RESCUE

Page 6

Cc. Drawer Release Procedure. (HS-5 only)

The game PCB and power supply are located in the slideout drawer assembly. To gain access to these items, follow these procedures to open the drawer. Use extreme caution to avoid touching the electrical portion of the drawer, as indicated in Figure 3.

  • Open the Coin Entry Door.
  • Reach in thru the door and straight up through the opening in the drawer.
  • Locate clamps in the extreme front left and right sides and unlatch both.
  • The drawer should now slide out of the cabinet.
CAUTION! 115 VOLTS

Q LATCH PLATE

POVER SUPPLY id LATCH i Il oc

OPENING IN DRAVER

COIN DOOR OPENING

Figure 3

IKARI ITT, THE RESCUE PAGE 3

o dud

www. basementarcede com GLASS

Page 7

THIS PAGE INTENTIONALLY LEFT BLANK

TKARI IIT, THE RESCUE PAGE 4

r www. basementorcade. con d

Page 8

II. OPERATION INFORMATION

A. Game Play.

IKARI III, The Rescue!M is a one or two player interactive coin-operated video game. The player controls the Hero image via one 8-way joystick with 12 position rotary switch, and three pushbuttons (see Figure 4). The joystick is used to manuever the player image on the screen, the 12 position rotary switch controls the direction the player faces, and the pushbuttons control attack and jump fuctions of the player.

IP START 2P START ©

©

8 WAY ROTARY IP PUNCH IP KICK & VAY ROTARY 2P PUNCH 2P KICK ~OYSTICK (RED BUTTONS) VONSTICK (YELLOV BUTTONS)

Figure 4

The player is attempting a daring top-secret rescue of a presidential candidate's son who has been kidnapped by terrorists. Once the player has found the child, he must guide the child out of the terrorist's camp to safety. The player can punch, kick, and jump. He can also use button combinations to jump kick, back punch, throw weapons, TNT, and fuel drums.

To obtain credits, the Left side player must insert coins into the Left side coin mechanism (Coin 1). The Right side player must insert coins into the Right side coin mechaniem (Coin 2). Fach player's credits are displayed on the screen in the lower left and right side corners.

IKARI III, THE RESCUE PAGE 5

www. besementarcade. com “Anteok®

Page 9

B. DIP-SWITCH OPTIONS.

IKART TIT, The ReseueIM can he adjusted to suit the location via two banks of 8 position Dip-Switches. Always remove power to the game when changing switch settings. The available settings are shown in the tables below. Factory recommended settings are indicated with an asterisk (*).

DIPSWITCH 1 | 1[2[3 [4 [5/6/7]8

MONITOR: NORMAL OFF

SCREEN FLUP On

BLEEDINGYesGFF} CHANGES BLOGD FROM RED
WHEN KILLEDNOGN | TOWHITE COLOR WHEN GN
2NOBONUSONCEOFF | €G;GET BONUS AT 20k &
OCCURENCEEVERYON | BOKONCE, OR EVERY 50h
COINPLAT1 COIN PLAYlua
PRICINGCOIN PLAYGN OF

1 OOIN/2 PLAY OFFION FREE PLAY GN JON

NUMBERTHREE (31OFF|OFF
OFTwo 2)ON OFF
UESFOUR (4)OFF] ON
FIVE(ION [ON
DIPSWITCH 24151647/8

14243 eer prcuuTY = EASY) [or or TFVFL NORMAL (2) /QN | OFF HARO(@) | oFF| ON HARDEST(4) JON | ON YES oFF | cite| ATTRACT

SOUNDNoON | oFF
NEVER FINISH GAME MODEOFF) ON)Test & DEHO USE
FREEZE DISPLAY MODEON | ceONLY
BONUS20,000. 50,000OFF | OFF
LEVELS40,000 & 100,000GN | OFF

60,000 & 150,000 OFF | ON NO BONUS on | ON CONTINUATION MODE © YES | INSERTCOIN TO CONTINUE | OFF NO | GAME PLAY OPTION oN

MODENORMAL GAME | ALWAYS Le‘SEE SECTION | OFF

MANUAL TEST | OF MANUAL REGARDING TEST MODE] ON

IKARI III, THE RESCUE PAGE 6

Page 10

C. Self Test Description.

The Memory I.C’s (Integrated Circuits) and Sound Circuits are automatically checked each time the game is powered up. In the event an error is detected, the game will display an error code indicating the nature of the problem. his code is an indication only, and should only be used as a starting point for trouble-shooting.

To place the game in Manual Test Mode, set switch 8 of Dipswitch 2 to the "ON" position and apply power to the game. The screen will display the first test screen. Press the Player 1 Start button to advance to the next test. The sequence of test are shown below.

  • DIP MODE CHECK

LDIP AGE DIPL jgaasere == DIPe jg assere cole Displays current Dip- L000 OK Switch settings. Each DISPLAY NORMAL switch is displayed with ts a "O"(off) or a "1" (on). LEVEL 1 ERO SOLND ON 1ST BOG 2282 SECOND BONUS 2ND BONS 50303 OOF I ON

  • CROSS-HATCH

Displays a white cross hatch pattern for monitor adjustment.

TT

  • COLOR TEST

3.COLOR. Displays a color pattern for monitor adjustment.

rep OREN BLE,

IKARI III, THE RESCUE PAGE 7

waseaek” www. besementarcede. com G&

Page 11
  • CONTROL TEST

Is

  • SPRITE TEST
  • SOUND TEST 6.FONT

<— RAR IME

TKARI TIL, THE RESCUE Displays all switch inputs, "0" indicates the switch is off, "1" indicates the switch is on.

Displays banks of background characters.

Displays sprite video image, allows you to move image using the 1 player joystick.

Set up Sound Code (?) and press 1 player Kick button to hear sound. Set Sound Code to OE to stop sound.

PAGE 8

Page 12

D. Rotary Joystick Information.

IKARI III, The Rescue! utilizes two g-way, 12-position Rotary Joysticks (Model LS30-24). In previous games these joysticks had problems holding up to the abuse given by the players. SNK has improved them by using stain-less steel for the parts subject to wear. The result is a joystick that is much improved and reliable.

For a complete breakdown of the spare parts, see the Replacement Parts List in this manual. These parts are available from authorized SNK dealers. Refer to the harness inter-connect illustrations in Figures 5 and 6. Please note that the joystick harness must be installed as shown for proper operation. [ f oe Sor Cosy ROTARY ENCODER — cme a INPUT _CONNECTORS| é é T71_EDGE CONNECTOR

SUB PCB cru Pca a

Figure 5

JOYSTICK HARNESS =| > ae pred]

ROTARY JOYSTICK CONNECTOR

PCB CONNECTORS

L__| | os cna Figure 6

PAGE 9

so ers on SD IKARI II], THE RESCUE

Page 13

THIS PAGE INTENTIONALLY LEFT BLANK

TKARI 111, THE RESCUE PAGE 10

enenan”

Page 14

III. Technical Information

A. Replacement parts List.

The following section lists the replacement parts available for this SNK game. These parts are available from your authorized SNK dealer.

NOTE: This game is offered in two models; the HS-1 with a 19" monitor, and the HS-5 with a 25" monitor. There are several components that are different between the two models. These components are indicated in the list below. When placing an order for replacement components, be certain to specify the model of your game and a complete description of the part required.

Final Assembly, Ikari III, The Rescue.

Cahinet assembly, Dynamo HS-1 (or HS-5) Monitor assembly, Wells-Gardner 19" (25") Power Supply assembly, 11 Amp Coin Door assembly, Coin Control Control Panel assembly, Ikari III, HS-1 (HS-5) PCB assembly, Ikari III Logo Plex, Ikari III Tube Card, Ikari III, HS-1 (HS-5) Side Decal, Left, Ikari III Side Decal, Right, Ikari III Manual, Ikari III

Power Supply Assembly, 11 Amp.

Switching Regulator, Imperial 11A Isolation Transformer, 115 vac, 1 amp EMI Line Filter, 5 amp, Corcom

Control Panel Assembly, Ikari III

Control Panel, Bare, HS-1 (HS-5) control Panel Overlay, Ikari III Joystick assembly, LS30-24 Pushbutton, 1P Start Pushbutton, 2P Start Pushbutton, 1pc micro, Red Pushbutton, lpc micro, Yellow

IKARI III, THE RESCUE PAGE 11

me ee OR

Page 15

Joystick Assembly, LS30-24.

© HOW TO REMOVE KNOR OF JOYSTICK ASSEMBLY. a 1. Insert “fingers” of joystick tool under knob Mai @ to align fing dots under knob. Push up to o cap. € )}— 2, Use hex wrench to remdve shaft nut.

Knob Setting Too!

PARTS NO. PARTS NAME ts30-1 Knob Cap Knut (M8) Knob (Main Body) Fastener r rmask guide Micro Switch Plate Micro Switch 90 C-Clip Spacer (8) Spacer (A) Washer (small) Shai Holder Shaft Holder Stand Washer (large) Spring 120 C-Clio Shatt Star Washer Rotary Switch Installation Plate (SUS) Rotary Switch Harness Rotary Switch Stopper Stand Steel Base

IKARI III, THE RESCUE PAGE 12 so errs SS

Page 16

B. Wiring Diagram.

RH cee e z riba? fl ee 7 PINS A THR? ~ SOLDER SIE

NOTE: PING 1 THRU 26 + PARTS SDE

TKARI ILI, THE RESCUE PAGE 13 a www. besementarcade.com G4 oe a a i

3 6 : § 3 aa

: ty 3s i=

im) ay as Nepor 2 | SES 3

i

Page 17

IKARI III, The Rescue

CUSTOMER RESPONSE CARD

Thank you for purchasing this fine SNK game. As part of our efforts to provide timely and pertinent information to you, please complete the information card below and return it to SNK Corporation of America. We will place your firm on a mailing list so that you will receive all published technical information regarding this product.

Please include all comments, good or bad, so that we may petter tailor our services and products to suit your needs.

CUSTOMER INFORMATION

COMPANY NAME: ADDRESS: CITY, STATE: ZIP: ‘TELEPHONE: YOUR NAME:

GAME INFORMATION

SERIAL NUMBER: DATE RECEIVED:

COMMENTS ON THIS PRODUCT:

COMMENTS ON SNK SERVICES:

Please return this card to:

SNK CORPORATION OF AMERICA 246 SOBRANTE WAY SUNNYVALE, CA. 94086

ATTN: COLN-OP CUSTUMER SERVICE

Ci] Rs ee www. besementarcade.com G4 ‘eatos