CATHODE RAY TOMES

Battle Bakraid

Battle Bakraid - Unlimited Version (USA) (Tue Jun 8 1999) (Eighting, 1999) · Manual · 4 pages · 10 sections · original scan

Page 1

Chung

CEIGHTING 1999 (BBI-01W)

Page 2

[Important Safety Instructions]

+ Tur off power before installation and removal of the circuit board. + Turn off power before changing the setting of any DIP switch. + Use board edge connectors that conform to the JAMMA standard. + Do not touch the heat sink or components when you hold the board since the heat sink and some components are very hot. + Set the board so that the heat sink is always well ventilated. + Avoid strong physical shock on the board and do not get it wet. + Do not disassemble or rebuild the board.

[Contents]

+ Manual (BBI-O1W) 1 copy + Instruction card (BBI-O2W) 1 copy + Circuit board 1 board

[Settings] [Pin Assignment] + Edge connector on circuit board = JAMMA Standard JAMMA Standard

  • Monitor Direction VERTICAL SCREEN ‘siD le) + Supply voltages to the board +5V(2A or greater) +12V/(1A or greater) (Maintain each voltage within £5% range.) + Control Panel

Eight direction lever

Se \, / PU: USH COIN COUNTER 2 COIN COUNTER 1

~<@|paBUSH 2Beg(COIN LOCK OUT 2)(COIN LOCK OUT 1)

Ww N.. N.C.

CHANGEVIDEO GREENVIDEO RED

SHOT MB

BOFORMATIONVIDEO SYNCVIDEO BLUE

SERVICE SW VIDEO GND 1

. . COIN SW2 COIN SW 1 *Maximum credits-9. sant Sw BATTEN A

2P UP 1P UP 6 { 2P DOWN 1P DOWN : 2P LEFT 1P LEFT

1P RIGHT 1P PUSH 1 1P PUSH 2 1P PUSH 3 N.C. N.C. GND GND 2P RIGHT 2P PUSH 1 2P PUSH 2 2P PUSH 3 N.C. N.C. GND GND -~ePATHNXXEKCCHHODVZSrPRARCIAMIOD>S

Page 3

[Test Mode]

To enter test mode, set DIP switch 1 -1 on the board ON, and then turn on power.

Caution: Turn off power before changing the setting of any DIP switch. Select a test item by moving the 1P PUSH1. The screen for the selected

BATTLE BAKRAID

> GAME MODE

DIP SWITCH SETTING

TEXT TEST

OBJECT TEST

CHARACTER TEST

MAP TEST

SOUND TEST

EEPROM INITIALIZE

[DIP Switch Settings]

ever to the appropriate vertical position and press the 1P

test item appears.

<Test Menu> 1.GAME MODE Brings you to the game screen for checking. 2.DIP SWITCH SETTING Allows you to perform input tests, DIP switch setting tests, and monitoring screen checking 3.TEXT TEST Allows you to check text to be used during the game. 4.0BJECT TEST Allows you to check the objects to be used during the game, 5.CHARACTER TEST : Allows you to check the characters to be used during the game. 6.MAP TEST Allows you to check the maps to be used during the game. 7.SOUND TEST Allows you to check the sound to be used during the game. 8.EEPROM INITIALIZE Clears the contents of the SAVE data. _

Caution: Selecting this mode clears the backed-up SAVE data and returns to the initial state.

Allows you to perform input tests, D| P switch setting tests, and monitoring screen checking. Selecting this mode on the TEST MENU screen initiates the ROM RAM CHECK. On the screen after the ROM RAM CHECK, pressing the 1P and 2P start buttons simultaneously brings you to the lO

CHECK screen.

DIP SWITCH SETTING

pip, swrrt CH 1

INTEST MODETEST
FSTARTING COIN1 CREDIT

FE COIN 1 lala 1 COIN 1 CREDIT FE 1.IO CHECK screen Lets you test switches, buttons, and the lever of the machine. If the screen changes from OFF to ON after you press a switch, a button, and the lever, the

machine is verified as normal Pressing the 1P and 2P start buttons simultaneously brings you to the DIP SWITCH SETTING screen. -DIP SWITCH SETTING screen Lets you check the settings of the DIP switches on the board, such as the type of coin and the degree of difficulty. (See the table of DIP switch settings for each setting.)

Caution: Tum off power before changing the setting of any DIP switch. Check the settings only on the DIP SWITCH SETTING screen. Pressing the 1P and 2P start buttons simultaneously brings you to the COLOR CHECK

screen. 3.COLOR CHECK screen Allows you to check color shades and brightness of the screen using each color bar. iN) COIN 2 BEE 1COIN 1 CREDIT FF

DIP SWITCH 2

41 OFFSTART RANKNORMAL

2 OFF

3 OFFTIMER RANKNORMAL

4 OFF

S OFFPLAYER COUNTS3
7 OFFEXTRAPLAYER2000000

8 ‘OFF EACH

DIP SWITCH 3

4 OFFSCREEN FLIPOFF
2 OFFDEMO SOUNDON
3 OFFSTAGE EDITDISABLE
4QFFCONTINUE PLAYENABLE
5 OFFINVINCIBLEOFF
6 GFFSCORERANKINGSAVE

7 OFF —NO USE 8 OFF NO USE

PRESS 1P & 2P START TO CHANGE TEST ITEMS

2.DIP SWITCH SETTING screen Adjust the machine screen using the above check results as guidelines. Pressing the 1P and 2P start buttons simultaneously brings you to the SCREEN CHECK

screen. 4.SCREEN CHECK screen Allows you to check the size and distortion of the screen using the cross-hatched screen. Adjust the machine screen using the above check results as guidelines. Pressing the 1P and 2P start buttons simultaneously initiates return to the MENU screen.

If you want to return to a normal game screen after checking the test mode, turn off power before turn DIP switch 1-1 on the board OFF, and then turn

on power again.

Page 4

[BATTLE BAKRAID DIP SWITCH]

DIP SWITCH1123[4[5678
TEST MODENORMAL PLAYOFF

TEST PATTERN ON

STARTING COIN1 CREDITOFF

2 CREDITS ON

1 COIN1 CREDITOFF | OFF | OFF
1 COIN2 CREDITSON _| OFF | OFF
1 COIN3 CREDITSOFF | ON | OFF
COIN 11 COIN4 CREDITSOn | ON | OFF
2 COINS1 CREDITOFF | OFF | ON
3 COINS1 CREDITON[OFF | ON
4 COINS1 CREDIToFF | ON | ON
1 COIN1 CREDITOFF | OFF | OFF
1 COIN2 CREDITSON | OFF | OFF
1 COIN3 CREDITSOFF | ON | OFF
COIN21. COIN4 CREDITSon| ON | OFF
2 COINS1 CREDIToFF | OFF | ON |
3 COINS1 CREDITON | OFF | ON
4 COINS1 CREDIToFF | ON | ON

FREE PLAY on | on | ON | ON | ON | ON DEFAULT SETTING OFF | OFF | OFF | OFF | OFF | OFF | OFF | OFF r

DIP SWITCH2123[45678
START RANKNORMALOFF | OFF
(Game start difficulty setting)EASYON | OFF

HARD OFF | ON VERY HARD on _| ON If the customer is not playing the game due to it's difficulty setting, it is useful to change the game start difficulty to an easier or a more difficult setting.

TIMER RANKNORMALOFF | OFF
(How the difficulty rateLowON _| OFF
increases during the game)HIGHOFF | ON

HIGHEST on | on If the playing time per customer is to long, it is useful to change the difficulty increase rate to a higher rate and if the playing time is to short to lower the rate.

PLAYER COUNTS3OFF | OFF

4 ON | OFF 2 OFF | ON 1 ON | ON

EXTRA PLAYER2,000,000 EACHOFF | OFF

3,000,000 EACH ON _| OFF 4,000,000 EACH OFF | ON NO EXTRA ON | ON DEFAULT SETTING OFF | OFF | OFF | OFF | OFF | OFF | OFF | OFF

DIP SWITCH 3123[4[5]678
SCREEN FLIPOFFOFF

ON ON

DEMO SOUND ‘ON OFF

NO SOUND. ON

STAGE EDITDISABLEOFF

ENABLE ON

CONTINUE PLAYENABLEOFF

DISABLE ON

INVINCIBLEOFFOFF

ON ON SCORE RANKING SAVE NO SAVE NO USE™

DEFAULT SETTINGOFF[OFF | OFF[OFF | OFF