CATHODE RAY TOMES

Atari System TM-27 1st Printing

Atari System I (Atari Games Corporation, 1984) · Manual · 60 pages · 60 sections · original scan

Page 1

Operators Manual sstPnnting ie CO fm With Illustrated Parts Lists

Page 2

Atari Games, Inc. Customer Service

If reading through this manual does not lead to solving a certain maintenance problem, call TELEHELP® at one of these Atari Games Customer Service offices:

UNITED STATES

Parts and Service

Atari Games, Inc. California Customer Service Office 737 Sycamore Drive PO. Box 906 Milpitas, CA 95035 Telex 17-2976 (Monday-Friday, 7:30-4:00 pm Pacific Time) ZS (408) 943-1120

EUROPE

Parts and Service

Atari Games, Inc. European Customer Service Office Tipperary Town, Ireland Telex 28165 (Monday-Friday, 9:00-6:00 pm GMT) WZ 062-52155

Page 3

Operators Manual

With Illustrated Parts Lists

n

> v slid

Page 4

© 1984 by Atari Games, Inc. All rights reserved. No part of this publication may be reproduced by any mechanical, photographic, or electronic process, or in the form of a phonographic recording, nor may it be stored ina retrieval system, transmitted, or otherwise copied for public or private use, without permission from the publisher. The game play, all graphic designs, this technical manual, its accompanying schematic diagrams, and the display manual are protected by the U.S. Copyright Act of 1976. This Act provides for increased penalties for violating federal copyright laws. Courts can impound infringing articles while legal action is pending. If infringers are convicted, courts can order destruction of the infringing articles. In addition, the Act provides for payment of statutory damages of up to $250,000 in certain cases. Infringers may also have to pay costs and attorneys’ fees and face an imprisonment of up to five years. Atari Games, Inc. will aggressively enforce its copyrights against any infringers. We will use all legal means to immediately halt any manufacture, distribution, or operation of a copy of video games made by us. Anyone who purchases such copies risks forfeiting such a game.

Published by: Atari Games, Inc. 1272 Borregas Avenue PO. Box 3618 Sunnyvale, California 94088

Printed in the U.S.A. 12N

Page 5

Notice Regarding Non-Atari Parts

A— WARNING — A Use of non-Atari parts or modifications of any ATARI® game circuitry may adversely affect the safety of your game, and may cause injury to you and your players.

You may void the game warranty (printed on the inside back cover of this manual) if you do any of the following:

  • Substitute non-Atari parts in the game. © Modify or alter any circuits in the game by using kits or parts 70f supplied by Atari Games, Inc.

NOTE

This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart of Part 15 of Federal Communications Commission (FCC) Rules, which are designed to provide reasonable protection against such interference when operated inacommercial environment. Operation of this equipment in a residential area or modification to this equipment is likely to cause interference in which case the user, at his own expense, will be required to take whatever measures may be required to correct the interference. If you suspect interference from an ATARI® game at your jocation, check the following:

  • All green ground wires in the game are properly connected as shown in the game wiring diagram.
  • The power cord is properly plugged into a grounded three-wire outlet. © The game printed-circuit boards (PCB) are properly instalied with the Electromagnetic Interference (EMI) ground plane. Ifyou are still unabie to soive the interference problem, please contact Customer Service at Atari Games, Inc, See the inside front cover of this manual for service in your area.

iii

Page 6

System I

Table of Contents

Set Up How to Use This Manual ......... 11 Inspecting the Cabinet ...... 13 Control and Switch Information . 1-4 Option Settings . . fasin sss 1-4 Voltage Piug Selection and Fuses 1-4

Maintenance Preventive Maintenance 2-2 Preventive-Maintenance Intervals 2-2 Removing the Control Panel . 22 Cleaning ..............0- 2-2

Corrective Maintenance . . 23 Removing the Display Shield and Bezel . . 23 Removing the Display . . . 2-4 Removing the Main PCB ... 2-6 Removing the Fluorescent Light Assembly . 27 Removing the Speakers . . 27

Troubleshooting ... 3-1 Troubleshooting Aids .... 3-1 Troubleshooting Techniques . 3-2 Troubleshooting Static-Sensitive Devices 3-4

Illustrated Parts Lists For complete list of all illustrations, see following page.

Glossary of Terms Glossary of Terms begins on page GI-I

Page 7

List of Illustrations

Figure 1-1 Figure 1-2 Figure 1-3

Figure 2-1 Figure 2-2 Figure 2-3 Figure 2-4 Figure 2-5

Figure 3-1 Figure 3-2 Figure 3-3 Figure 3-4

Figure 4-1 Figure 4-2 Figure 4-3 Figure 4-4 Figure 4-5 Figure 4-6 Figure 4-7

Table 1-1 Table 2-1 System I Cabinet Overview ..... ways sccm HES adng gg tenga Control and Switch Locations Voltage-Selection Plug and Fuse Locations . .

Display Shield and Bezel Removal . . Video Display Removal ......... 7 Main Printed Circuit Board Removal east Fluorescent-Light Assembly Removal ...............05 Speaker Removal .............000005 peaeereds

IC Removal (Cut Pin Method). IC Pin Removal........ Solder Removal from Plated? ‘Through Holes . Solder Removal From Wire-Connection Pads . thee eee

Cabinet-Mounted Assemblies»... 2.0.6.0... 000. e eee Power Supply Assembly ...... . Coin Controls, Inc. Coin Door Assembly beets Coin Acceptors, Inc. Coin Door Assembly ... 0.0.0.0. 00 0005 PCB Mounting Hardware ...............- Main Printed-Circuit Board Assembly Regulator/Audio III Printed-Circuit Board Assembly .

List of Tables

Installation Requirements............- Recommended Preventive Maintenance Intervals 4-2 4-6

4-11 4-14 4-16 ©. 425

No Nw System |

Page 8

vi

Safety Summary

The following safety precautions apply to all game operators and service personnel. Specific warnings and cautions will be found throughout this manual where they apply.

A WARNING A

Properly Ground the Game. Players may receive an electrical shock if this game is not properly grounded! To avoid electrical shock, do not plug in the game until it has been inspected and properly grounded. This game should only be plugged into a grounded 3-wire outlet. If you have only a 2-wire outlet, we recommend you hire a licensed electrician to install a grounded outlet. Players may receive an electrical shock if the control panel is not properly grounded! After servicing any parts on the control panel, check that the grounding clip is firmly secured to the metal tab on the inside of the control panel. Only then should you lock up the game. AC Power Connection. Before connecting the game to the AC power source, verify that the proper voltage-selection plug is installed on the game's power supply. Disconnect Power During Repairs. To avoid electrical shock, disconnect the game from the AC power source before removing or repairing any part of the game, When removing or repairing the video display, extra precautions must be taken to avoid electical shock because high voltages may exist within the display circuitry and cathode-ray tube (CRT) even after power has been disconnected. Do not touch internal parts of the display with your hands or with metal objects! Always discharge the high voltage from the CRT before servicing this area of the game. To discharge the CRT: Attach one end ofa large, well-insulated, 18-gauge jumper wire to ground, Momentarily touch the free end of the grounded jumper to the CRT anode by sliding it under the anode cap. Wait two minutes and discharge the anode again. Use Only ATARI Parts. To maintain the safety integrity of your ATARI game, do not use non- ATARI parts when repairing the game. Use of non-ATARI parts or other modifications to the game circuitry may adversely affect the safety of your game, and injure you or your players. Handle Fluorescent Tube and CRT With Care. If you drop a fluorescent tube or CRT and it breaks, it may implode! Shattered glass can fly six feet or more from the implosion. Use the Proper Fuses. To avoid electrical shock, use replacement fuses which are specified in the parts list for this game. Replacement fuses must match those replaced in fuse type, voltage rating, and current rating. In addition, the fuse cover must be in place during game operation.

CAUTION Properly Attach All Connectors. Make sure that the connectors on each printed-circuit board (PCB) are properly plugged in. Note that they are keyed to fit only one way. If they do notslip on easily, do not force them. A reversed connector may damage your game and void the warranty. Ensure the Proper AC Line Frequency. Video games manufactured for operation on 60 Hz line power (i¢., United States) must not be operated in countries with 50 Hz line power (ie., Europe). The fluorescent light ballast transformer wiil overheat, causing a potential fire hazard if 60 Hz games are operated on power lines using 50 Hz. Check the product identification label of your game for the line frequency required.
Page 9

A—WARNING—A: To avoid electrical shock, do not plug in the cabinet until it has been properly inspected. and set up for the line voltage in your area. This cabinet should be connected toa grounded 3-wire outlet only. If you have only a 2-wire outlet, we recommend you hire a licensed electrician to install a grounded outlet. Players may receive an electrical shock if this cabinet is not properly grounded. Do not touch internal parts of the display with your hands or with metal objects.

Set-Up

How to Use This Manual

This manual is intended for game operators and service personnel, The information in this manual describes how to set up, maintain, and troubleshoot your Atari Games System I™ cabinet. Please refer to the game kit manual for information on the Cartridge PCB and the self-test of the game.

‘Your System I™ cabinet is designed to accept the necessary hardware to easily convert the cabinet into a variety of games. Consequently, this manual contains information that applies to those parts of the System I cabinet that are common to all games. Information that applies to those parts that are replaced to convert the System I cabinet to a particular game are contained in a game kit operators manual that comes with each game game kit. Where applicable, references are provided in this manual to the game kit operators manual. This manual contains the following information on the System I cabinet:

  • Chapter 1 provides set-up information.
  • Chapter 2 provides preventive and corrective maintenance procedures,
  • Chapter 3 provides troubleshooting procedures.
  • Chapter 4 provides illustrated parts lists. Schematic diagrams of the System I cabinet circuitry are included as a supplement to this manual (SP-277). Refer to the Schematic Package Supplement included with the game kit operators manual for the game cartridge schematic, control-panel wiring diagrams, and any other diagrams pertaining exclusively to the game kit.

Chapter 1

Page 10

SerUp System 1

Attraction Panel Fluorescent Tube Assy See Figure 2-4 Video Display See Display Manual and Figure 4-1 Rear Access Panel

Main PCB Assy See Figures 2-3 and 4-6

Cartridge PCB

Fan See Game Kit Manual

Speakers See Figure 2-5

Control Panel Assy See Game Kit Manual

Power On/Off Switch

Power Supply Assy See Figure 4-2 Coin Counter Reg./Audio Ill PCB Assy See Figure 4-7

See Fi 3 & 4-4 042907-01 4 ee Figures 4-3 Front Access Panel

Figure 1-1 System I™ Cabinet Overview

Page 11

System |

Inspecting the Cabinet

A— WARNING —A

Do not plug in the cabinet until you have completed steps 1 through 3.

Please inspect your System I cabinet carefully to ensure that it has been delivered to you in good condition. Refer to Figure 1-1 for the locations of the component parts of the cabinet. Table 1-1 lists space, power, and environmental requirements for this cabinet.

  • Examine the exterior of the cabinet for dents, chips, or broken parts.

i} Unlock and remove the frontaccess panel. Unlock and open the coin door, From the top rear of the cabinet, remove the six attaching screws and lift off the display-access panel. Inspect the interior of the cabinet as follows: a. Ensure that all plug-in connectors(on the cabinet harnesses) are firmly plugged in. Do not force connectors together. The connectors are ke they only fit in the proper orientation. A reve) edge connector may damage a printed-circ board (PCB) and will void the warranty. b. Ensure that all plug-in integrated circuits on each PCB are firmly plugged into their sockets.

Self-Test Switch

Reg./Audio lil PCB Assy setup

c. Inspect the power cord for any cuts or dents in the insulation.

d. Inspect the power supply. Make sure that the correct fuses are installed and that the proper voltage plugs are inserted for your location's line voltage (refer to Voltage-Plug Selection and Fuses). Check that the harness is plugged in correctly and that the fuse-block cover is mounted in place. Check that the green ground wire is connected. ce. Inspect other major subassemblies, such as the video display, printed-circuit boards (PCBs), speakers, and the fluorescent tube. Make sure they are mounted securely and that the green ground wires are connected.

Table 1-1 Installation Requirements

Characteristic Requirement

Power Consumption 225 VA, 210 W RMS typical with game components installed ‘Temperature +5° to +38° C(+37° to +100° F) Humidity Not to exceed 95% relative Line Voltage 100 to 132 VAC (or 200 to 264 VAC) Width 25.50 in. (64.6 cm) Depth 35 in. (89 cm) Height 70 in. (178 cm) Weight 327 Ibs. (148 kg) maximum with game components installed

Volume Control

Figure 1-2 Control and Switch Locations

Page 12

Set-Up

Control and Switch Information

Power On/Off Switch The power on/off switch is located at the rear of the cabinet.

Volume Controls The volume controls are located on the Regulator/Audio III PCB (see Figure 1-2). The volume controls adjust the level of sound produced by each game sound channel.

Coin Counters The coin counter(s) are located behind the upper coin door (see Figure 1-1). The coin counter(s) record the number of coins played.

Self-Test Switch The self-test switch is located on the Regulator/Audio HI PCB (see Figure 1-2). The self-test switch selects the Self- Test Mode to check game operation, Refer to the conversion kit operators manual for the complete description of self-test operation.

Fuse F2 4A, 250V

Fuse F3 25A,32V

Fuses F4-F6 4A, 250V

System I

Option Settings

Refer to the self-test information in the game conversion kit operators manual for setting the options.

Voltage-Plug Selection

and Fuses

The power supply in your game contains six fuses. When you replace a fuse, use the identical type fuse with the same electrical rating (see Figure 1-3). The power supply in your System I cabinet operates on the line voltage of many countries. The power supply comes with either one, two, or thre: tage plugs. Plug voltages and wire colors are 100 VAC (violet wire), 120 VAC (yellow wire), 220 VAC (blue wire), and 240 VAC (brown wire). Sec Figure 1-3 for placement of the voltage plugs. Before plugging in your System I cabinet, check your line voltage. Next, check the wire color on the voltage plug and make sure the voltage plug is correct for the line voltage in your location

Fuse F1 7 A, 250 V for US-Built Games 4A, 250 V for Iretand-Built Games

J3

Figure 1-3 Voltage Plug and Fuse Locations

Page 13

Maintenance

This chapter includes preventive and corrective maintenance procedures for components that are common to all System I cabinets. References are provided, where applicable, to the Maintenance chapter in the game kit operators manual for those components that are unique to a specific game, To assure maximum trouble-free operation from this game, we recommend that preventive maintenance be performed as described in this chapter avd in the Maintenance chapter of the game kit operators manual. Removal, disassembly, reassembly, and replacement procedures are provided for System I cabinet components that may require corrective maintenance. Appropriate references are provided to Chapter 4, Illustrated Parts Lists, to aid in locating the parts of this cabinet that are mentioned, but not illustrated, in the maintenance procedures.

Chapter 2

Page 14

Maintenance System I

Preventive Maintenance

Preventive maintenance includes cleaning the coin mechanism, interior components of the cabinet, and display shield. How often preventive maintenance is performed depends upon the game environment and frequency of play. However, for those components listed in Table 2-1 Recommended Preventive-Maintenance Intervals, we recommend that preventive maintenance be performed at the intervals specified.

NOTE Refer to the Maintenance chapter in the conversion kit operators manual for preventive maintenance procedures for the player controls on the control panel.

Preventive-Maintenance Intervals

The preventive-maintenance intervals specified in Table 2-1 are the recommended minimum requirements for the components listed.

A— WARNING — A

To avoid possible electrical shock, turn offand unplug the game before performing any maintenance procedures.

  • Insure that the fan is operating and is forcing air into the cabinet’s interior Lack of air circulation will severely shorten the life of the power-supply components.
  • Re-seat the various connectors between the power supply and PCBs to insure good electrical contact.
  • Verify correct display adjustments using the self-test screens described in the game kit manual.

Table 2-1 Recommended Preventive- Maintenance Intervals

Component Maintenance Interval

Clean at least every three months. Clean at least every six months. Coin Mechanism Interior Components

Removing the Control Panel

Refer to the Maintenance chapter in the conversion kit operators manual for control panel removal procedures.

Cleaning Cleaning the Coin Mechanism

Use a soft-bristled brush to remove loose dust or foreign material from the coin mechanism. A toothbrush may be used to remove any stubborn build-up of residue in the coin path. After cleaning the coin mechanism, blow out all of the dust with compressed air. Cleaning the Display Shield The display shield may be cleaned with any non-abrasive household cleaner.

Cleaning the Interior Components Perform the following procedure to clean the electrical assemblies inside the cabinet.

A—WARNING—A Turn off the cabinet power, but do not unplug the power cord before cleaning inside the cabinet. The power cord provides a ground path for stray static voltages that may be present on the cleaning tools.

  • Unlock and remove the front access panel from the cabinet.
  • Use a Phillips screwdriver to remove the six screws securing the display access panel to the top rear of the cabinet.
  • Discharge the high-voltage from the cathode-ray tube (CRT) before proceeding. The display assembly contains a circuit for discharging the high voltage to ground when power is removed. However, to make certain, always discharge the display as follows. a. Attach one end ofa large, well-insulated, i8-gauge jumper wire to ground. b. Momentarily touch the free end of the grounded jumper to the CRT anode by sliding it under the anode cap. c. Wait two minutes and repeat part b.
CAUTION Be extremely careful when cleaning the electrical components inside the cabinet. Avoid touching the electrical components with any solid object other than the soft bristles of the vacuum attachment or paint brush.

4, Usea vacuum cleaner with a soft long-bristled brush attachment or a soft-bristled paint brush to remove loose dirtand dust accumulation on the electrical assemblies inside the cabinet.

Page 15

System I Maintenance

Corrective Maintenance

Corrective mainiénance consists of removal, disassembly, reassembly, and replacement of cabinet components. The following procedures are provided for components that may require corrective maintenance.

NOTE Refer to the Maintenance chapter in the game kit operators manual for the corrective maintenance procedures for the player controls,

Display Shield

‘Speaker Grille

Removing the Display Shield

and Bezel

Perform the following procedure to remove/replace the display shield and bezel (see Figure 2-1). L

wo Remove the control panel as described in the Maintenance chapter of the game kit operators manual. Use a Phillips screwdriver to remove the two screws securing the speaker grilie to the cabinet. Grasp the display shield on the bottom edge and gently pull it out about a half inch from the cabinet. Gently lower the display shield to free it from the grooved moulding under the attraction panel. Use a flat-head screwdriver to remove the staples, if any, securing the bezel to the cabinet. Remove the bezel.

Figure 2-1 Display Shield and Bezel Removal

2-3

Page 16

Maintenance

Removing the Display

A— WARNING—A— High Voltage This display contains lethal high voltages. To avoid injury, do not attempt to service this display until you observe all precautions necessary for working on high-voltage equipment

X-Radiation This display has been designed to minimize X-radiation, However, to avoid possible exposure to soft X-radiation, NEVER modify the high-voltage circuitry.

Implosion Hazard The cathode-ray tube may implode if struck or dropped. Shattered glass may cause injury within a 6-foot radius. Use care when handling the display.

Perform the following procedure to remove/replace the display (see Figure 2-2). 1, Turn the game off and wait two minutes. Unplug the game. Use a Phillips screwdriver to remove the six screws securing the display-access panel to the top rear of the cabinet. Remove the display shield and bezel as previously described. Ww

6.

System I

Discharge the high-voltage from the cathode-ray tube (CRT) before proceeding. The display assembly contains a circuit for discharging the high voltage to ground when power is removed. However, to make certain, always discharge the display as follows. a. Attach one end ofa large, well-insulated, 18-gauge jumper wire to ground. b. Momentarily touch the free end of the grounded jumper to the CRT anode by sliding it under the anode cap.

c, Wait two minutes and repeat part b. From the back of the cabinet, unplug the displayharness connectors and disconnect the ground wire.

A— WARNING— A To avoid dropping the display assembly out of the game cabinet, use extreme care when removing the display-mounting nuts, We recommend thata second person carefully hold the display chassis from the back of the cabinet while the mounting nuts are being removed.

From the front of the cabinet, use a 4-inch wrench to remove the four nuts and flat washers securing the display to the cabinet. Carefully slide the display out through the front of the cabinet. Replace the display in the reverse order of removal

Page 17

System 1 Maintenance

NOTE Whenever the cathode-ray tube is replaced, readjust the brightness, purity, and convergence as described in the display manual.

Rear Access Panel Display Mounting Studs

Video Display

Figure 2-2. Display Removal

2-5

Page 18

system I

Removing the Main PCB

Perform the following procedure to remove/replace the Mair

2-6 n PCB (sec Figure 2-3).

NOTE The procedure for removing the Cartridge PCB is included in the Maintenance chapter of. the game conversion kit operators manual

‘Turn the cabinet power off. Unlock and remove the front-access panel from the cabinet. Disconnect the harness connectors from the Main PCB.

Main PCB Assy

Cartridge PCB Assy Maintenance

Use a Phillips screwdriver to remove the six screws securing the ground plane to the cabinet. Carefully remove the ground plane, with the PCB(s) attached, and place on a clean surface. Use a Phillips screwdriver to remove the four screws securing the Main PCB to the ground plane. Gently disconnect the Main PCB from the Cartridge PCB. Replace the Main PCB in the reverse order of removal. Make sure that the Main PCBis fully inserted into the Cartridge PCB edge connectors and the ground strap is properly connected to the ground plane. Refer to Figure 2-3 for the ground strap and harness connector locations,

Ground Strap

Ground Plane

PCB Ground Plane Insulator

Figure 2-3, Main PCB Removal

Page 19

Maintenance

Removing the Fluorescent-

Removing the Fluorescent Light Assembly

Perform the following procedure to remove/replace the fluorescent-light assembly (see Figure 2-4).

  • Turn the game power off. 2, From the rear of the cabinet, use a Phillips screwdriver to remove the six screws securing the display-acecss panel to the cabinet.
  • Disconnect the fluorescent-light harness connector.
  • From the front of the cabinet, use a 4-inch hex driver to remove the three screws and washers securing the upper retainer to the top of the cabinet. Ww Grasp the top edge of the attraction shield and film and lift out of the cabinet
  • Gently twist the fluorescent tube a quarter turn and remove from the sockets.
  • Use a Phillips screwdriver to remove the two screws securing the fluorescent-light bracket to the cabinet.
  • Lift the fluorescent-light assembly out of the front of the cabinet. 9, Replace the fluorescent-light assembly in the reverse order of removal

Retainer

Attraction Shield ?

Attraction Film

Figure 2-4 Fluorescent-Light Assembly Removal System I

Removing the Speakers Perform the following procedure to remove/replace the speakers (see Figure 2-5).

  • Remove the control panel as described in the Maintenance chapter of the game kit operators manual.
  • Usea Phillips screwdriver to remove the two screws securing the speaker grille to the cabinet.
  • Use a Phillips screwdriver to remove the four screws securing each speaker to the cabinet.
CAUTION Do not touch the speaker cones when handling the speakers, The cone material is fragile and can be easily damaged.
  • Lift the speaker out just far enough to disconnect the two speaker wires from the back of the speaker.
  • Replace the speaker in the reverse order of removal

Speaker

Speaker Grille

Figure 2-5 Speaker Removal

2-7

Page 20

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 21

Troubleshooting

This chapter contains troubleshooting aids and techniques to assist service personnel when trouble is suspected ina game. Most troubles can be located quickly by following the information in this chapter. However, if problems persist, contact your Atari Games Customer Service office for assistance. In addition to the troubleshooting information in this chapter, refer to The Book, A Guide to Electronic Game Operation and Servicing, available from Atari Games Inc., for additional information,

NOTE We recommend that troubleshooting and repair procedures be performed by qualified service pexsonnel.

Troubleshooting Aids

Troubleshooting aids are provided throughout the System J operators manual and Schematic Package Supplement, and also in the game kit operators manual and Schematic Package Supplement. The following information is intended to acquaint the service technician with the portions of these publications that contain useful troubleshooting and sepair information.

Assembly and Component Locations

‘The illustrated parts lists in Chapter 4 of this manual and in the game kit operators manual illustrate the locations of assemblies and components. Printed-circuit board (PCB) illustrations aid in rapidly locating components shown on the corresponding schematic diagram.

Diagrams

The Schematic Package Supplement for this manual and for the game kit operators manual contains schematic diagrams with component locations, active component type numbers, and electrical values.

Chapter 3

Page 22

‘Troubleshooting

Troubleshooting Techniques

A— WARNING —— A—— The following steps may require power and shouldbe performed only by knowledgeable service personnel.

The following troubleshooting steps start with a game that has no display and progresses to more extensive procedures for localizing the problem to an assembly or major circuit, and then to a defective component.

Check Fuses Check for open fuses. Refer to the power supply parts list in Chapter 4 and to the display manual for the location and rating of each fuse used in this game. Make sure that replacement fuses are the proper type and rating,

Check Power-Supply Voltages

Improper operation ofall circuits usually indicates a power supply problem. Be sure that the proper line yoltage is available to the power supply (see Chapter 1), Check for correct output voltages.

Localize Trouble Determine the trouble symptom. Use the wiring and schematic diagrams in the Schematic Package Supplement for this manual and the game conversion kit operators manual to determine which assemblies or major circuits could cause the trouble. Perform the self-test procedure provided in the game conversion kit operators manual.

Visual Check Visually check for obvious problems in that portion of the game where the trouble is suspected, For example, check for loose or defective solder connections, integrated circuits loose in their sockets, loose cable connections, broken wires, and damaged PCBs or components.

Check Individual Components Check soldered-in passive components (e.g, resistors, capacitors, diodes) by disconnecting one end to isolate the measurement from the effects of the surrounding circuitry. Often, direct substitution is the most practical way to determine if a component is faulty. However, eliminate the possibility of some other circuit problem that could damage the substitute component.

3-2 System I

Repair or Replace the Faulty Assembly

CAUTION Soldered-in transistors and integrated circuits are difficult to remove without damaging the printed-circuit board or component. Refer to the information in this chapter pertaining to soldering and replacing integrated circuits and transistors.

Repair or replace the faulty part, Refer to Chapter 2 and information in this chapter for special removal and replacement procedures. Check for proper operation of the repaired circuit

Soldering Techniques

Observe the following recommendations when removing or replacing components soldered to a PCB, Poor soldering practices can damage a PCB or heat-sensitive electrical components. Choosing the proper soldering iron is essential before attempting to remove or replace soldered-in components. Excessive heat is a common cause Of damage to. acomponent or PCB. However, transient voltages from solder guns or improperly grounded soldering irons can also damage certain voltage-sensitive semiconductor devices. Refer to Troubleshooting Static-Sensitive Devices for more specific information. A15- to 27-watt pencil-tip soldering iron is recommended to avoid separating the etched circuit wiring from the board material and to avoid damaging active components. A temperature-controlled soldering station rated at 700° F with a fine cone or a very fine chisel tip can also be used.

CAUTION Solder guns are not recommended for remoying or replacing soldered-in components ona printed-circuit board. The added possibility for overheating, and the large transient voltage induced by the solder gun, could cause damage to heat- or voltage-sensitive device

The following additional equipment is recommended for removing and replacing soldered-in components:

  • Solder Sucker—Hand-operated vacuum tool used to remove liquified solder from the PCB. Top-of-the-line Soldapulle® brand is recommended.
  • Solder Wick—Resin-soaked copper braid used for removing excess solder from the lead connections on the PCB, See Removing Integrated Circuits for precautions relating to the use ofa solder wick on a multi-layer PCB with plated-through holes.
Page 23

System I

  • Flux Remover—Non-corrosive chemical used to clean foreign material from the PCB before soldering and to remove any flux residue where components have been replaced, Also used to clean any foreign material from the PCB during preventive maintenance. lsopropy] alcohol is recommended.

¢ Acid Brush—Small stiff-bristled paint or toothbrush used with flux remover to clean flux and other foreign material from the PCB.

Removing Integrated Circuits The easiest and safest method for removing soldered-in integrated circuits (IC) from a PCB is to cut off each pin as close to the IC case as possible with a tip dyke (diagonal cutter) as shown in Figure 3-1.

Diagonal Cutter

Figure 3-1 IC Removal (Cut Pin Method)

Use the proper soldering iron as previously described under Soldering Techniques. Then, to avoid excessive heat buildup in one area of the PCB, apply heat directly to each

Soldering Iron

Solder Sucker

Preferred Method ‘Troubleshooting

pin ina random order. Remove the loosened pin with the tip of the soldering iron or a needle-nose pliers as shown, in Figure 3-2. Allow amoment for the PCB to cool before proceeding to the next pin. Apply just enough heat to remove any stubborn pins.

Needle-Nose Pliers

Figure 3-2 IC Pin Removal

Fora multi-laver PCB with plated-through holes, use a sol der sucker to remove the remaining solder from inside each hole as shown in Figure 3-3, If possible, suck the solder from the opposite side of the PCB from where the heat is applied.

Solder Sucker

Alternate Method

Figure 3-3 Solder Removal From Plated-Through Holes

3-3

Page 24

‘Troubleshooting

Use a solder wick to remove excess solder from around the lead connection pads on the top and/or bottom surface of the PCB as shown in Figure 3-4

CAUTION Do not use a solder wick to remove solder from inside plated-through holes. The heat required for the solder wick to remove the solder from inside the hole could damage the PCB.

Soldering Iron Solder Wick

Figure 3-4 Solder Removal From Wire-Connection Pads

3-4 System I

Troubleshooting Static-

Sensitive Devices

Certain precautions must be taken when working with static-sensitive devices, (e.g., microprocessors, field-effect transistors (FET), complementary metal-oxide semiconductors (CMOS), and other large-scale integration (LSI) devices that use metal-oxide semiconductor (MOS) technology). Static charge buildup in a person's body or leakage from an improperly grounded soldering iron can cause static-sensitive device failure. Before handling a static-sensitive device or a PCB with such devices attached to it, ground any static voltage that may have accumulated in your body by touching an object that has been earth grounded. A bare wire wrapped around your wrist and attached to an earth ground is effective when working extensively with static-sensitive devices. When soldering on a static-sensitive device, use asoldering iron with a properly grounded three-wire cord. (Refer to Soldering Techniques for a discussion of recommended soldering irons and procedures.) A static-sensitive device may appear defective due to leakage on a PCB. Observe the precautions for grounding static voltages described in the preceding paragraph and clean both sides of the PCB with flux remover or an crascr before replacing what may be a good static-sensitive device. For discrete FETS, clean thoroughly between the gate, drain, and source leads. Static-sensitive devices may be packaged in conductive foam or have a protective shorting wire attached to the pins. Remove the conductive foam just prior to inserting, the device into its socket or soldering toa PCB, Remove the shorting wire only after the device is inserted into its socket or after all the leads are soldered in place.

Page 25

Illustrated Parts Lists

This chapter provides information you need to order parts for your game. Common hardware (screws, nuts, washers, etc.) has been deleted from most of the parts lists. However, a parts list is included for the hardware to mount the printed-circuit boards (PCBs) to the cabinet. The PCB parts lists are arranged in alphabetical order by component. Each component subsection is arranged alphanumerically by reference designator. Other parts lists are arranged alphanumetically by Atari part number. In these parts lists, all A-prefix numbers appear first. Following these are numbers in sequence evaluated up to the hyphen, namely 00- through 99-, then 000598- through approximately 201000-. When ordering parts, please give the part number, part name, number of this manual, and serial number of your game. This will aid in filling your order rapidly and correctly. We hope the results will be less downtime and more profit from your game. Atari Customer Service numbers are listed on the inside front cover of this manual.

Chapter 4

Page 26

Illustrated Parts Lists System I

042890-01 042895-01 Display Shield Upper Retainer

042892-01 42896-01 042891-01 oe Attraction Shield Bezel Speaker Grille Attraction Film See Game Kit Manual

139003-1004 Matsushita Display

042910-01 Rear Access Panel

A002465-01 Coin Counter Assy

Control Panel Assy 042894-02 See Game Kit Marual Right Decal

148004-002 Speaker

A038881-01 176013-001 Lock Assy Latch

042907-01 038091-01 Front Access Panel ‘Coin Box

A043032-01 Coin Doors 78-3201 Power Harness Assy See Figures 4-3 & 4-4 ‘Adjustable Gide

Figure 4-1 Cabinet-Mounted Assemblies A042880-01 A

Page 27

Illustrated Parts Lists System 1

042894-01 Left Decal A036096-01 Trak Ball Harness A043033-01 Coin Harness Assy A043035-01 Display Harness Assy esse Ground Jumper A043034-01 Audio Harness Assy ‘n043084-01 Audio Harness Assy

178093-001 Fan Guard

042914-01 Fan Grille

A043055-01 On/O# Switch w/ Harness

’ Main PCB Assy 009992-01 See Figuies 4-5 & 4-7 On/Off Switch Cover

042933-01 Ground Plane Plate

Regulator/Audio Il PCB Assy See Figures 4-58 4-6 A043036-01 PCB Power Harness

Power Supply Assy 034482-02 See Figure 4-2 Power Supply Chassis Base A043032-01 Power Supply Capacitor Power Harness Assy and Mounting Bracket See Figure 4-2

Figure 4-1 Cabinet-Mounted Assemblies, continued A042880-01 A

Page 28

Illustrated Parts Lists System I

Cabinet-Mounted Assemblies Parts List

Part No. Description

A002465-01 Coin Counter Assembly A038881-01 Lock Assembly A042881-01 Cabinet Assembly

A042884-01 Fluorescent Light Panel Assembly—consists of: AG05493-01 Light Harness Assembly A037458-03 Light Kit Assembly 4037540-01 Ground Jumper Assembly 70-304 18-Inch, 15 W, Cool White Fluorescent Tube 72-6408S #4 x Ye-Inch Pan-Head Cross-Recessed Screw 79-561816P Wire Nut 99-11006 Retaining Clip 038151-01 Jumper Wire 042920-01 Attraction Glass Panel 176015-110 #10 x %-Inch Pan-Head Cross-Recessed Screw

A043032-01 Power Harness Assembly A043033-01 Coin Harness Assembly A043034-01 Audio Harness Assembly 4043035-01 Display Harness Assembly

A043036-01 PCB Power Harness Assembly A043037-01 Fan with Harness Assembly A043055-O1 On/Off Switch with Harness Assembly A043086-01 Ground Jumper

The following are the technical information supplements to this game cabinet: TM-220 19-Inch Matsushita Color Raster Display Manual. (Acceptable substitutes are TM-160—Electrohome and TM-210—Disco) TM-277 Atari System | Operators Manual SP-277 Atari System | Schematic Package

78-3201 Adjustable Glide 78-6900402 Ye-Inch x -Inch Foam Tape (used on coatro! panel and attraction glass) 009992-01 On/On Switch Cover 037768-01 Vent Grille

038091-01 Molded Coin Box 042890-01 Display Shield 042891-01 Attraction Shield 04289201 Display Bezel

042894-01 Left Side Panel Decal 042894-02 Right Side Panel Decal 042895-01 Attraction Panel Upper Retainer 042896.01 Speaker Grille

04290701 Front Access Panel 042910-01 Rear Access Panel 042914-01 Fan Grille 042933-01 Power Supply Ground Plane Plate

139003-1004

148004-002 176013-001 178093-001 19-Inch Color Raster Matsushita Display (Acceptable substitutes are 92-049—Electrohome and 139003-1006—Disco) S-Inch Round, 4-Ohm High-Fidelity Speaker Spring Draw Latch Fan Guard

4-4

Page 29

System I Ulustrated Parts Lists

N O T E S

Page 30

Illustrated Parts Lists System I

A035888-01 ‘Transformer

WARNING Assembly

Fuse block cover must be in place during game operation.

29-053 A021084-xx Capacitor ¢ Voltage Plug

034544-02 Fuse Block Cover :

79-4411001 ’ 78-70801SC Fuse Post Capacitor Bracket

46-2017002 Fuse

74-3816A 034482-02 Aiuminum Spacer < = (not shown) b . ; : L- Chassis

oO) eee}

~ 037639-01 A035891-02 Label

Fuse Harness Assembly

46-2014002 Fuse 78-2708 Bushing 46-301203 Fuse 46-2014002 037641-01 Fuses Label ‘A034630-01 Filter Assembly Fuse Block

A035890-01 Power Harness

79-15021001 Terminal Block A034629-01 © AC Harness 3A-MDA3501 Rectifier

Figure 4-2 Power Supply Assembly A037671-16 M

Page 31

iJ F System I Illustrated Parts Lists

Power Supply Assembly Parts List

DesignatorDescriptionPart No.
cl27,000 pF, 15 VDC Electrolytic Capacitor29-053
cl2-Inch Capacitor Mounting Bracket78-70501SC
CRIType-MDA3501 Bridge Rectifier3A-MDA3501
FLFuse Label037639-01
Fl4 A, 250 V, 3AG Slow-Blow Glass Cartridge‘Type Fuse46-2014002

(Acceptable substitute is part no. 46-2014001)

Fl7 A, 250 V, 3AG Slow-Blow Glass Cartridge‘Iype Fuse46-2017002
FIPanel-Mounting 3AG Cartridge-Type Fuse Post79-4411001
F25-Position 3AG Fuse Block with 4 -Inch Terminals79-3206
F2-F6Fuse Harness AssemblyA035891-02
F2-F6Fuse Block Cover034544-02
F2-F6Fuse Label03 7641-02
F325 A, 32 V, 3AG Slow-Blow Glass Cartridge-Type Fuse46-301253
F42-Circuit Single-Row ‘Terminal Block7915021001
FLIRFI Filter AssemblyA034630-01
J2Power Harness AssemblyA035890-01
BVoltage Block Assembly (105-135 VAC—yellow wire)A021084-02
J4aAC Harness AssembiyA034629-01
TlTransformer AssemblyA035888-01

#8 x 1-Inch Unthreaded Aluminum Spacer 74-3816

Nylon 6/6 Hole Bushing with %-Inch Inside Diameter x *%4-Inch 78-2708 Outside Diameter Power Supply Chassis Base 034482-02

Page 32

Illustrated Parts Lists System I

170000-001 99-15026 Lamp Coin inlet 179047-001 Lamp Base 99-15023 Base Plate

99-15056 Screw for Bezel 99-15040 Lever

99-15025

Coin Inlet

C la———_ 99-15054 Pivot fer Lever

99-15055 a Retaining Screw

75-9148 Hex Nut

ee 99-15028 Coin Return Box Lock Wash,

99-15056 99-15027 ‘Screw for Bezel Coin Return Box.

99-15075 Sw, Adjuster

99-15029 Bracket

99-15042 Switch

75-3414S Screw

72-1414, Screw

Figure 4-3 Coin Controls, Inc. Coin Door Assembly 171034-xxx A

4-8

Page 33

system I Illustrated Parts Lists

99-15052 99-15067 Spring for Button Lock Assy. 99-15038

e—— Bezel for Button

99-15063 Screw

99-15001 thru 99-15011 Return Button,

A037542-01 Harness—not shown

99-15039 Bezel for Cover

99-15036 Cover 99-15067 Lock Assy.

99-15071 Clamp

99-15066 Screw

99-15073 Upper Door 99-15074 99-15070 Lower Door | Doors and Frame \ 99-15072 Door Frame

171034-001 — U.S. 25¢/25¢ Coin Door 171034-003 — Canadian 25¢/25¢ Coin Door 171034-005 — U.K. 10 P/50 P Coin Door 171034-006 — U.K. 20 P/S0 P Coin Door 171034-009 — German 2 DM/1 DM Coin Door 171034-010 — German 2 DM/S OM Coin Door 171034-011 — German 1 DM/5 DM Coin Door 171034.015 — French 2 Frit Fr Coin Door

Figure 4-3 Coin Controls, Inc. Coin Door Assembly, continued 171034-xxx A

Page 34

Illustrated Parts Lists System I

Coin Controls, Inc. Coin Door Assembly Parts List

Part No. Description 403659701 Harness Assembly _(Ireland-built cabinet only) A037542-01 Harness Assembly 72-1414S #4-40 x %-Inch Cross-Recessed Pan-Head Steel Machine Screw 75-056 #6 Internal-Tooth Zinc-Plated Steel Lock Washer

75-9148 #4-40 Steel Machine Hex Nut 75-3414S #4-40 x %-Inch 82° Cross-Recessed Flat-Head Steel Machine Screw 99-15001 Coin Return Button with US. 25-Cent Price Plate 99-15002 Coin Return Button with U.S. $1 Price Plate 99-15003 Coin Return Button with German 1 DM Price Plate 99-15004 Coin Return Button with German 2 DM Price Plate 99-15005 Coin Return Button with German 5 DM Price Plate 99-15006 Coin Return Button with Belgian 5 Fr Price Plate 99-15007 Coin Return Button with French 1 Fr Price Plate 99-15008 Coin Return Button with Japanese 100 Yen Price Plate 99-15009 Coin Return Button with British 10 Pence Price Plate 99-15010 Coin Return Button with Australian 20-Cent Price Plate 99-1501] Coin Return Button with Italian 100 Lire Price Plate 99-15025 Left Half of Coin Inlet 99-15026 Right Half of Coin Inlet 99-15027 Side Plate of Coin Return Box

99-15028 Base Plate of Coin Return Box 99-15029 Switch Bracket 99-15036 Metal Coin Return Cover 99-15038 Bezel for Coin Return Button 99-15039 Meul Bezel for Coin Return Button 99-15042 Coin Switch for U.S. 25 Cents 99-15052 Spring for Coin Return Button 9915055 Retaining Screw 99-15056 #4-40 x 3.-Inch Cross-Recessed Pan-Head Steel Machine Screw 99-15060 Switch Cover 99-15063 Screw for Hinge 99-15066 Screw for Clamp 9915067 Lock Assembly 99-15070 Doors and Frame 99-1507] Clamp for Frame 99-15072 Door Frame 99-15073 Upper Door 99-15074 Lower Door 99-15075 Switch Adjuster 99-15083 Base Plate—includes: 99-15040 Lever 99-15054 Pivot for Lever 038091-01 Coin Box—not included in assembly (Acceptable substitute is part no. A037491-01) 176900-001 6.3 V Miniature Wedge-Base Incandescent Lamp 171006-035 Metal Coin Mechanism 171056-001 Dual Entry Face Plate 179047-001 Lamp Base

4-10

Page 35

System I Illustrated Parts Lists

99-10140 Panel Assembly 75-9488 Locknut

99-10116 Lever 99-10152 Right Coin Inlet 99-10147 Harness 171006-035, Coin Mechanism

75-9448 Locknut 99-10096 Fastener

99-10151 Left Coin Inlet

70-11-47 Lamp

99-10080

99-10105 Bar

99-10104

99-10042 thru 99-10045 99-10154 Coin Switch Assembly Bracket Assembly

99-10153 Coin Return Box 99-10150 Switch Cover 99-10068 Coin Chute

65-4416 Coin Switch

99-10075 thru 99-10078 Switch Wires. 99-10008 Retainer 7514128

Screw

Figure 4-4 Coin Acceptors, Inc. Coin Door Assembly 171027-001 A

Page 36

Illustrated Parts Lists

99-10148 Lock Assembly

99-10142

72-HA1404C System I

Button Housing

Screw

99-10134 99-10119 Cover 99-10139 > __

Coin Door a Button Assembly seuonte

utton

2 99-10115 99-10148 Spring Lock Assembly

99-10145 Cam

99-10141 Coin Return Cover gS % 99-10117

Coin Return Door

72-JA1405B Screw

038091-01 Coin Box

Figure 4-4 Coin Acceptors, Inc. Coin Door Assembly, continued 171027-001 A j~—— 99-10144 Channel Clip

99-15066 Screw

99-10149 Service Door

99-10143 Frame

Page 37

System I illustrated Parts Lists

Coin Acceptors, Inc. Coin Door Assembly Parts List

Part No. Description

65-441C Coin Switch 70-11-47 Miniature Bayonet Lamp 72-94068 #4-40 x -Inch Truss-Head Screw 72-HAL404C #4-40 x \4-Inch Pan-Head Screw 72-JA1405B #4-40 x .31-Inch Pan-Head Screw 7514128 #4-40 x 34-Inch Pan-Head Screw 75-9448, #4-40 Locknut 99-10008 Retainer 99-10042 Coin Switch Assembly for Belgian 5 Frand U.S. $.25 99-1043 Coin Switch Assembly for German 1 DM, Japanese 100 Yen, Swiss 1 Fr 99-10044 Coin Switch Assembly for German 2 DM, Italian 100 L, US, $1.00 99-10045 Coin Switch Assembly for Australian $.20, German 5 DM, British 10 P 99-10068 Coin Return Chute

99-10075Switch Wire(included in coin switch assembly 99-10043)
99-10076Switch Wire(included in coin switch assembty 99-10042)
99-10077Switch Wire(included in coin switch assembly 99-10044)
99-10078Switch Wire(included in coin switch assembly 99-10045)

99-10080, Lamp Socket 99-10081 Key Holder 9910096 Fastener 9910104 Bar Retainer 9940105 Bar 99-0115 Spring 9910116 Plastic Coin Return Lever 99-1017 Steel Coin Return Door 99-0118 Amber Coin Return Button 99-1019 Amber Coin Buuton for U.S, $.25 9910134 Coin Button Cover

9910139 Coin Door 99-10140 Coin Door Inner-Panel Assembly 9910141 Die-Cast Coin Return Cover 9910142 Die-Cast Button Housing 99-10143 Coin Door Frame 99-10144 Channel Clip 99-10145 Cam 9930147 Harness 99-10148 Lock Assembly 99-10149 Service Door 99-10150 Switch Cover 9940151 Left Coin Inlet

99-10152 Right Coin Inlet 99-10153 Coin Return Box 99-10154 Bracket Assembly 99-15066 Screw for Clamp 038091-01 Coin Box 171006-035 Metal Coin Mechanism for U.S. $.25 177010-238 #8-32 Hex Locknut

Page 38

System I Illustrated Parts Lists

034536-11 Foam Damper ef Ba ge g Ground Strap

ee ee ae

ae ee 176015-112 #10 Screw

75-016S, #6 Flat Washer 72-1606S #6 Screw

Main PCB Assy See Figure 46

042930-01 Ground Plane Insulator Cartridge PCB 042931-01 Ground Plane Mounting Plate

A042932-01 A Figure 4-5 Printed-Circuit Board Mounting Hardware

Page 39

System I Illustrated Parts Lists

Regulator/Audio III PCB Assy See Figure 4-7

175004-708 #8 Finer Washer

FA

034536-02 Foam Damper

Figure 4-5 Printed-Circuit Board Mounting Hardware, continued

Printed-Circuit Board Mounting Hardware Parts List

Part No. Description A042854-21 Atari System I Main PCB Assembly—see Figure 4-6 A043046-01 Regulator/Audio Ill PCB Assembly--see Figure 4-7 034536-02 33x Y%-Inch Foam Vibration Damper 034536-10 3 x6x .62-Inch Foam Vibration Damper

03453611 3.x6x.81Inch Foam Vibration Damper 042930-01 PCB Ground Plane Insulator 042931-01 PCB Ground Plane Mounting Plate 72-1606S #6 x %-Inch Cross-Recessed, Pan-Head Machine Screw

75-0168 #6 Flat Washer 175004-708 #8 Fiber Washer 176015-112 #10 x 34-Inch Cross-Recessed, Pan-Head, DeepThreaded Screw

4-15

Page 40

Illustrated Parts Lists System I

NOTICE TO ALL PERSONS RECEIVING THIS DRAWING CONEIDENTIAL-Reproducionforbccen winautnespece writen passion of A Games, inc., Sunnyvale, CA. This érawingis only conditionally issued. and neither receipt nor possession theredt conlers or ar'slersany right in, o: license fouse, the suDject Mater ofthecrawing tcrany design or technical information snowa hereon, nor any fight 0 reproduce his drawing ‘ov any part ineceot. Except for manufacture by vendors of Avari Games, Ine. and! for manutacureunder the corporations wrileniicense. no ight is grartecto reproduceihis drawing orthe subject matter thereot, unless by wniten agreement with of wiillen permission from tne corporation

Bo gr age ~P d marcy Clea Py i woos ete

= 1 HOLL i J EE cee 5

ote a pas [+

a ae cise [P cea aI suse £3, pad a] 258, i3a—— a]

cur co

‘TO ir al all all a 4 q yop all al -

Ih aa oe a a] ] ] a] cass ] = a cass. = eas as

cas. ea Pry ]

oe on a Ze es & ona wh

ave aaa) os co ose coed i

wors- 2

mt ca) os. com ]

oo cas = A ni 7 8 yp (i 4 “oe gee Soe te nas ys gen ems w 2 SE ; 6 8 ‘ 2 2 1

Figure 4-6 Main Printed-Circuit Board Assembly A042854-21 A

4-16

Page 41

System Ilustrated Parts Lists

Main Printed-Circuit Board Assembly Parts List

DesignatorDescriptionPart No.

Capacitors

Ccl-80.1 wF, 50 V, Ceramic Capacitor122002-104
co100 pF, 100 V, Mica Capacitor128002-101
clo39 pE, 100 V, Mica Capacitor128002-390
cn-i3470 pF, 50 V, Ceramic Capacitor122013-471
C4161000 pF, 100 V, Ceramic Capacitor122016102
ci?10 pF, 25 V, Electrolytic Capacitor24-250106
C18, C190.1 pF, 50 V, Ceramic Capacitor122002-104
20-270.01 uF, 25 V, Ceramic Capacitor122005-103
C28480.1 pF, 50 V, Ceramic Capacitor1220024104
C49, C500.01 uF, 25 V, Ceramic Capacitor122005-103
51-660.1 2E, 50 V, Ceramic Capacitor122002-104
C6710 uF, 25 V, Electrolytic Capacitor24-250106
68-790.1 gE, 50 V, Ceramic Capacitor122002-104
C81, C82Q.1 wF, 50 V, Ceramic Capacitor122002-104
C85, C860.1 uF, 50 V, Ceramic Capacitor122002-104
C88-980.1 wk, 50 V, Ceramic Capacitor122002104
99-1001000 pE, 100 V, Ceramic Capacitor122016-102
Cio10.001 pF, 50 V, Ceramic Capacitor122002-102
103-109O.1 gE, 50 V, Ceramic Capacitor122002-104
culo, Cl1 pF, 50 V, Electrolytic Capacitor24-500105
Cli4-126O.1 WE, 50 V, Ceramic Capacitor122002-104
C12710 uF, 25 V, Electrolytic Capacitor24250106
128-133,0.1 WE, 50 V, Ceramic Capacitor122002-104
138-1550.1 wE, 50 V, Ceramic Capacitor122002-104
C15610 pF, 25 V, Electrolytic Capacitor24-250106
C1570.1 aF, 50 V, Ceramic Capacitor122002-104
C15810 pE, 25 V, Electrolytic Capacitor24250106
C159-1640.1 pF, 50 V, Ceramic Capacitor122002-104
C165100 pF, 35 V, Electrolytic Capacitor24-350107
C1660.0027 pF, 50 V, Ceramic Capacitor122015-272
C1670.0027 E, 50 V, Ceramic Capacitor122015-272
C168,10 wE, 25 V, Electrolytic Capacitor24250106
C1691 pF, 50 V, Electrolytic Capacitor24-500105
170-1740.1 wE, 50 V, Ceramic Capacitor122002-104
175-1761000 pF, 100 V, Ceramic Capacitor122016-102
C177-194O.1 pF, 50 V, Ceramic Capacitor1220024104
C1951000 pk, 100 V, Ceramic Capacitor122016-102

Connectors

Jioi12-Position Header Connector179069-012
§102-$10411-Position Square Pin Header Connector79118-011
jis6-Position Square Pin Header Connector179118-006
S10611-Position Square Pin Header Connector179118-011
Jies8-Position Square Pin Header Connector179118-008
PI, P280-Position Card Edge Connector179221-180

(continued on next page)

Page 42

Mlustratec Parts Lists

Main Printed-Circuit Board Assembly Parts List, continued System I

DesignatorDescriptionPart No.

Diodes

CRI-2Type-IN4148 Diode131033-001
CR4‘Type-IN756A Diode32-IN756A
CR5-6Type-MV5053 Light Emitting Diode38-MV5053

Inductors

Ll100 wH Inductor141002-001
12-41 wH Inductor141007-001
Ls68 wH Inductor141016-008

Integrated Circuits

1A‘Type-74LS86 Integrated Circuit37-7ALSB6
1B‘Type-74LS74 Integrated Circuit37-74LS74
IC‘Type-74S10 Integrated Circuit137236-001
1D‘Ivpe-74S08 Integrated Circuit37-74808
1EType-74LS153 Integrated Circuit37-TALS153,
1F‘Type-748163 Integrated Circuit137274-001
MH‘Type-74S163 Integrated Circuit137274-001
yType-748163 Integrated Circuit137274001
1KType-74L874 Integrated Circuit37-74LS74
1L-4L1024 x 4, 45 ns Static RAM Integrated Circuit137199-002
1MType-74830 Integrated Circuit137407-001
2AType-74802 Integrated Circuit37-74802
2B‘Type-74LS194 Integrated Circuit37-74LS194
2c‘Type-74LS138 Integrated Circuit137177-001
2D“Type-74L804 Integrated Circuit37-741804
2EType-74LS153 Integrated Circuit37-74LS153,
2F‘Type-745163 Integrated Circuit137274-001
2H‘Type-748163 Integrated Circuit137274-001
3‘Tpe-745163 Integrated Circuit137274-001
2KType-74S374 Integrated Circuit137206-001
2MType-7418244 Integrated Circuit37-7418244
3A‘Type-741S74 Integrated Circuit37-T4ISTA
3B‘Type-74LS32 Integrated Circuit37-74LS32
3CType-74LS153 Integrated Circuit37-74L5153
3D‘Type-74LS139 Integrated Circuit37-7AL8139
3E‘Type-825129, 50 ns PROM integrated Circuit136032-101
3F‘Type-7419378 Integrated Circuit137305-001
3H‘Type-74LS174 Integrated Circuit37-7ALS174
3y‘Type-7415273 Integrated Circuit37-7ALS273
3K‘Type-748374 Integrated Circuit137206-001
3M‘Type-7415244 Integrated Circuit3 77ALS244
4aType-74LS14 integrated Circuit37-7ALS14
4B‘Type-741S194 Integrated Circuit37 7ALSI94
4c‘Type-74S153 Integrated Circuit37-7418153
4DType-748273 Integrated Circuit137247-001
4EType-74LS163A Integrated Circuit3ETALSIOBA

4-18 (continued on next page)

Page 43

System 1 Illustrated Parts Lists

Main Printed-Circuit Board Assembly Parts List, continued

DesignatorDescriptionPart No.
4FType-74L832 Integrated Circuit37-74LS32
4HType-74LS153 Integrated Circuit37-7ALSIS3
4g‘Type-74LS139 Integrated Circuit37-74LS139
4K‘Type-74LS151 Integrated Circuit37-7ALSI51
4MType-745189 Integrated Circuit37-748189,
5AType-74LS197 Integrated Circuit137240-001
5B‘Type-74L874 Integrated Circuit37-7ALS74
5c‘Type-741804 Integrated Circuit37-74L804
5DType-74LS163A Integrated Circuit37-TALSIOZA
SE‘Type-825129, 50 ns PROM Integrated Circuit136032-102
SFType-2364, 300 ns ROM Integrated Circuit136032-104

(Acceptable substitute is part no. 136032-107)

SH‘Tpe-7415273 Integrated Circuit37-7418273
5)Type-74LS153 Integrated Circuit37-7418153
5KType-74LS174 Integrated Circuit37-74LS174
5L‘Type-741S283 Integrated Circuit137204-001
5MType-748189 Integrated Circuit37-748189
OAType-74LS74 Integrated Circuit37-74LS74
6BType-741S08 Integrated Circuit37-74LS08
6C‘Type-74LS153 Integrated Circuit37-7ALSIS3
6DType-74LS1634 Integrated Circuit37-74LS163A,
OEType-74S163 Integrated Circuit137274-001
OFType-741S163A Integrated Circuit37-7ALSIOBA
6H4k x 4, 55 ns Static RAM Integrated Circuit137360-001
o4k x 4,55 ns Static RAM Integrated Circuit137360-001
6K‘Type-74LS273 Integrated Circuit37-T4i8273
OLType-74LS283 Integrated Circuit137204-001
6MType-74LS257 Integrated Circuit37-7ALS257
7AType-74874 Integrated Circuit37-7AST4
7BType-74LS191 Integrated Circuit37-74LSI91
7cType-74L5153 Integrated Circuit37-74LS153
7DType-74S175 Integrated Circuit37-748175,
7EType-7418273 Integrated Circuit37-7ALS273
TEType-82S153, 50 ns PAL Integrated Circuit136032-103
7H4k x 4,55 ns Static RAM Integrated Circuit137360-001
Al4k x 4,55 ns Static RAM Integrated Circuit137360-001
7K‘Type-74L8273 Integrated Circuit37-7418273
7LType-74LS283 Integrated Circuit137204-001
7MType-74LS257 integrated Circuit37-74L8257
8A‘Type-74874 Integrated Circuit37-74874
8B‘Type-748240 Integrated Circuit137416-001
8cType-748260 Integrated Circuit37-74S260
8DType-741S125 Integrated Circuit137317-001
8E‘Type-74LS163A Integrated Circuit37-7ALSIOZA
8FType-74L8153 Integrated Circuit37-74LS153,

(continued on next page)

Page 44

Illustrated Parts Lists System T

Main Printed-Circuit Board Assembly Parts List, continued

DesigaatorDescriptionPart No.
8H4k x 4,55 ns Static RAM Integrated Circuit137360-001
8)4k x 4,55 ns Static RAM Integrated Circuit137360-001
8KType-7AL$273 Integrated Circuit37-74LS273
8L‘Type-7418283 Integrated Circuit137204-001
8M‘Type-74L$257 Integrated Circuit377418257
9B‘Type-741S163 Integrated Circuit37-7ALSIOZA
9c‘Type-74LS273 Integrated Circuit37-74LS273,
9DType-74L$374 Integrated Circuit37-74LS374
9E‘Type-74LSI91 Integrated Circuit377415191
OFType-74LS191 Integrated Circuit37-7ALSIOL
9H4k x 4, 55 ns Static RAM integrated Circuit137360-001
a4k x 4, 55 ns Static RAM Integrated Circuit137360-001
OK‘Type-741S174 Integrated Circuit37-7ALSI74
OL,‘Type-74LS244 Integrated Circuit37-74LS244
oMType-74LS374 Integrated Circuit37-74LS374
10CType-7407 Integrated Circuit37-7407
10D1024 x 4, 35 ns Static RAM Integrated Circuit137199-001
10EType-741S273 Integrated Circuit37-7ALS273
10F‘Type-74LS273 Integrated Circuit37-7ALS273,
10H‘Type-74LS153 Integrated Circuit37-74LS153
10}‘Type-74L8245 Integrated Circuit37-7ALS245
10KType-74L8244 Integrated Circuit37-T4LS244
10L.150 ns Static RAM Integrated Circuit1372-001
1c‘Type-7407 Integrated Circuit37-7407
uD1024 x 4, 35 ns Static RAM Integrated Circuit137199-001
ME‘Type-74LS273 Integrated Circuit37-74L8273
IF‘Type-74L8244 Integrated Circuit377418244
THType-7415373 Integrated Circuit37-74LS373
VWType-741S245 Integrated Circuit37-74LS245
IK‘Type-74LS373 Integrated Circuit37-74LS373,
HL150 ns Static RAM Integrated Circuit437211-001
12CType-7407 Integrated Circuit37-7407
RD1024 x 4,35 ns Static RAM Integrated Circuit137199-001
12E‘Type-74S151 Integrated Circuit37-74S151
12F‘Type-74L5245 Integrated Circuit37-74LS245
12HType-74L8245 Integrated Circuit37-7ALS245
2K‘Type-74LS245 Integrated Circuit37-7418245
12k.‘Type-23128, 200 ns, ROM Integrated Circuit136032-106,

(Acceptable substitute is part no. 136032-109)

12MType-74LSI63A Integrated Circuit37-T4LS1O3A
BCType-74L5273 Integrated Circuit37-74LS273
3D1024 x 4, 35 ns Static RAM Integrated Circuit137199-001
BE‘Type-74L802 Integrated Circuit37-741802
13FType-74LS32 Integrated Circuit37-7ALS32
BHType-74L820 Integrated Circuit37-7ALS20

(continued on next page)

Page 45

System I Illustrated Parts Lists

Main Printed-Circuit Board Assembly Parts List, continued

DesignatorDescriptionPart No.
13/4J‘Type-68010-L8 Integrated Circuit Microprocessor137414-001
BL‘Type-23128, 200 ns ROM Integrated Circuit136032-105

(Acceptable substitute is part no. 136032-108)

13KType-74L8245 Integrated Circuit377418245
13M‘Type-74LS32 Integrated Circuit37-TALS32
14/15BLETA Integrated Circuit137304-1001
14/5DADC0809 Integrated Circuit137243-001
14C‘Type-74LS138 Integrated Circuit137177-001
148‘Type-74L800 Integrated Circuit37-741800
14F‘Type-74LS368A Integrated Circuit137168-001
14H‘Type-74LS148 Integrated Circuit137417-001
14K‘Type-74L8244 Integrated Circuit377418244
14L150 ns Static RAM Integrated Circuit137211-001
14M‘Type-74LS138 Integrated Circuit137177001
15C‘Type-74LS74 Integrated Circuit37-74LS74
15E‘Type-74LS245 Integrated Circuit37-T4LS245,
15F‘Type-2804, 450 ns EPROM Integrated Circuit,137329-450
15H‘Type-7418259 Integrated Circuit37-74L8259
15KType-74L8244 Integrated Circuit37-74LS244
15L150 ns Static RAM Integrated Circuit137211-001
15M.150 ns Static RAM Integrated Circuit137211-001
16D‘Type-74LS08 Integrated Circuit37-74L808
16E‘Type-74LS374 Integrated Circuit37-74LS3 74
16F‘Type-7418374 Integrated Circuit37-74LS374
16H‘TypeY2151 Integrated Circuit137401-001
16)‘Type-74LS74 Integrated Circuit37-74LS74
16KType-74LS245 Integrated Circuit37-74LS245
16LType-74L8245 Integrated Circuit37-7ALS245
16M150 ns Static RAM Integrated Circuit1372-001
17C‘Yype-74LS244 Integrated Circuit37-74L8244
17D‘Type-74LS367A Integrated Circuit37-7ALS367A
17FType-LM324 Integrated Circuit37-LM324
17H‘Type¥M3012 Integrated Circuit137402-001
vilType-74L32 Integrated Circuit37-74L832
17™‘Type-74L$244 Integrated Circuit37-74L8244
18H‘Type-LM324 integrated Circuit37-LM324
18)‘Type-74LS138 Integrated Circuit137177-001
18KCustom Integrated Circuit012294
18hType-6502A Integrated Circuit Microprocessor90-6013
18MType-74L8244 Integrated Circuit37-7ALS244
19E‘Type-LM324 Integrated Circuit37-LM324
19M‘Type-74LS139 Integrated Circuit37-7ALS139

(continued on next page)

4-21

Page 46

Ulustrated Parts Lisis System I

Main Printed-Circuit Board Assembly Parts List, continued

DesignatorDescriptionPart No.

Resistors

RI1kQ, +5%, & W Resistor110000-102
R22200, +5%, % W Resistor110000-221
R3, R4JOkQ, +5%, Y% W Resistor110000-103
R5390.2, +5%, & W Resistor110000391
R6-85109, +5%, % W Resistor110000-511
R9-111k, +5%, % W Resistor110000-102
RI25102, +5%, 4 W Resistor110000-511
RB2.2 kQ, 5%, 4 W Resistor110000-222
RI4, RIS1kQ, +5%, % W Resistor110000-102
RI71kQ, £5%, % W Resistor110000102
RIS10kQ, +5%, % W Resistor110000-103
RID680, +£5%, % W Resistor110000-680
R202.2 kQ, +5%, % W Resistor110000-222
R214.7k@, +5%, 4 W Resistor110000-472
R221Ok@, +5%, % W Resistor110000-103
R2320kQ, +5%, % W Resistor110000-203
R24, R2510k, +5%, % W Resistor110000-103
R262.2kQ, +5%, %4 W Resistor110000-222
R274.7 kQ, +5%, % W Resistor110000-472
R2810kQ, 45%, 4 W Resistor110000-103
R2920k, +5%, 4 W Resistor110000-203
R302.2kQ, +5%, % W Resistor110000-222
R314.7kQ, +5%, %& W Resistor110000-472
R3210kQ, +5%, % W Resistor110000-103
R33.20 KO, +5%, 4 W Resistor110000-203
R342.49 kO, +1%, 44 W Resistor1001-252
R354.99 kK, +1%, % W Resistor1011-502
R3610kQ, +5%, % W Resistor110000-103
R3720 KM, +5%, % W Resistor110000-203
R38-41270, +5%, Y% W Resistor110000-270
R42-491009, +5%, %& W Resistor110000-101
R5O, R511kQ, £5%, % W Resistor110000-102
R523.3.kQ, +5%, 4 W Resistor110000-332
R53, R542200, +5%, % W Resistor110000-221
R55-581kQ, £5%, 4 W Resistor110000-102
R594.7kQ, +5%, %& W Resistor110000-472
ROL, R621kQ, +5%, % W Resistor110000-102
R64, ROS1kQ, £5%, % W Resistor110000-102
R66-6910kQ, +5%, % W Resistor110000-103
R7027kQ, +5%, 4 W Resistor110000-273
R71, R7222 kQ, +5%, % W Resistor110000-223
RB39 kD, 45%, 4 W Resistor110000-393
R7427 kG, +5%, Ye W Resistor110000-273
R7515 kQ, £5%, & W Resistor110000-153

4-22 (continued on next page)

Page 47

System 1 Illustrated Parts Lists

Main Printed-Circuit Board Assembly Parts List, continued

DesignatorDescriptionPart No.
R7639 kQ, +5%, % W Resistor410000-393
R801kQ, +5%, %4 W Resistor110000-102
R81, R8215 kQ, +5%, % W Resistor110090-153
R89, RIO4.7 kQ,5%, %& W Resistor110000-472
ROL5600, +5%, 4 W Resistor110000-561
R923902, +5%, % W Resistor110000-391
R971kQ, +5%, % W Resistor110000-102
RIOL%, 4 W Resistor110000-102
R1041kQ, +5%, % W Resistor110000-102
RIOS2200, +5%, % W Resistor110001-221
RIOG4.7 kQ,+5%, %& W Resistor110000-472,
RIO?2200, +5%, 4 W Resistor110000-221
R108-1111002, +5%, % W Resistor110000-101
Riul21kQ, +5%, % W Resistor110000-102
R13, R1410 kQ, +5%, 4 W Resistor110600-103
R17, RUS4.7 kQ, £5%, V4 W Resistor110000-472
RIO2200, +5%, 4 W Resistor110000-224
R1I20-125682, +5%, %4 W Resistor110000-680
R1I27-i294702, +5%, 4 W Resistor110000-471
RIZ0-1321kQ, +5%, 4 W Resistor110000-102
RI33~-1363302, +5%, % W Resistor110000-331
R137-1391kQ, +5%, %& W Resistor110000-102
R140, R1413300, +5%, % W Resistor110000-341
R1421kQ, +5%, 4 W Resistor110000-102
RN33.3k x 8, +5%, & W, SIP Resistor318002-332
RN4470 x 5, 5%,W, SIP Resistor118009-471
RNS-7330 x 5, +5%, & W, SIP Resistor118009-331
RN8, RN910k x 8, Com, +5%, & W SIP Resistor118002-103
RNI2, RNi31k x 8, Com, +5%, % W SIP Resistor118002-102
GND+5VIOQ, +5%, 4 W Resistor110005-001
GND2-GND40, +5%, 4 W Resistor110005-001

Sockets 3E in Medium-Insertion-Force IC Socket 79-42C16 SE in Medium-Insertion-Force IC Secket 79-42C16 SF -Pin Medium-Insertion-Foree IC Socket 79-42C28

TF20-Pin Medium-Insertion-Force IC Socket79-42C20
RL28-Pin Medium-Insertion-Force IC Socket79-42C28
1BA4J64-Pin Medium-Insertion-Force !C Socket79-42C64
13L28-Pin Medium-Insertion-Force IC Socket79-42C28
SF24-Pin Medium-Insertion-Force IC Socket79-42C24
15M24-Pin Medium-Insertion-Force IC Socket79-42C24
16H24-Pin Medium-Insertion-Force IC Socket79-42C24
JH16-Pin Medium-Insertion-Force IC Socket79-4216
18K40-Pin Medium-insertion-Force IC Socket79-42C40
18L40-Pin Medium-Insertion-Force IC Socket79-42C40

(continued on next page)

4-23

Page 48

Illustrated Parts Lists System I

Main Printed-Circuit Board Assembly Parts List, continued

DesignatorDescriptionPart No.

Transistors

a‘Type-2N3904 ‘Transistor34-2N3904
Q2-4‘Type-2N3906 Transistor33-2N3906
Q5-7‘Type-2N3904 Transistor3.4-2N3904
8Type-2N3643 Transistor34-2N3643,
Q9‘Type-2N3906 Transistor33-2N3906
Ql0-11Type-2N6044 Transistor34-2N6044
Ql2, Q13Type-2N3904 Transistor34-2N3904

Miscellaneous

Q10, QUNylon Snap-In Fastener81-4302
YI14.318 MHZ Crystal90-101

15.5-Inch Bus Bar 178178-011 6.8-Inch Bus Bar 178178-005

9.71nch Bus Bar 178178-007 Test Point (Acceptable substitute is part no. 020670-01) 179051-002

Page 49

Illustrated Paris Lists system I

g $ =

1 o be eo—™~ 4 g ° © © +SENSE

200 © -SENSE pal Su 'SeWED UeNy Jo S10DUAA Aq asnIDey 101094 0} 146

JEU 10) BOX JORIOY, UeD A

so ubsap Av ONIMWHA SIHL ONIAIAOaY SNOSHAd TY O1 35110N

043046

ATARI GAMES INC

(1984 595 @

v3 @

220 @

it Board Assembly d-Circui' -0O1 A A043046 Figure 4-7 Regulator/Audio HI Printe:

AL

Page 50

Illustrated Parts Lists

Regulator/Audio III Printed-Circuit Board Assembly System I

Parts List

DesignatorDescriptionPart No.

Capacitors

cl22 pF, 35 V Electrolytic Capacitor24-350226
c20.22 wF, 25 V Ceramic Capacitor422004-224
C30.001 uF, 50 V Ceramic Capacitor122002-102
C40.1 wF, 50 V Ceramic Capacitor122002-104
cS22 uF, 35 V Electrolytic Capacitor24-350226
C60.22 uB, 25 V Ceramic Capacitor122004-224
C70.001 wE, 50 V Ceramic Capacitor122002-102
c80.1 wE, 50 V Ceramic Capacitor122002-104
C9, C1022 uF, 35 V Electrolytic Capacitor24-350226
Cll, C120.1 pF, 50 V Ceramic Capacitor122002-104
C133300 pk, 35 V Eiectrolytic Capacitor24-350338
cl40.22 wF, 25 V Ceramic Capacitor122004-224
cis3300 wR, 35 V Electrolytic Capacitor24-350338
C160.22 wk, 25 V Ceramic Capacitor122004224
C17, C18.0.1 pF 50 V Ceramic Capacitor122002-104
C191000 pF, 25 V Electrolytic Capacitor24-250108
C200.1 pF, 50 V Ceramic Capacitor122002-104
C2122 wE 35 V Electrolytic Capacitor24350226
C220,001 nF, 50 V Ceramic Capacitor122002-102
C23, C240.1 #E, 50 V Ceramic Capacitor122002104
C25-C273300 pF, 35 V Electrolytic Capacitor24350338
C28470 uF, 25 V Electrolytic Capacitor24-250477
290.1 pE, 50 V Ceramic Capacitor122002-104

Connectors

J69-Position Header Connector179069-009
jv12-Position Header Connector179069-012
J89-Position Header Connector179213-009

Diodes

CRI-CR3Type-IN4002 Diode31-IN4002
CR4-CR7Type-IN5401 Rectifier Diode31-IN5401
CR8, CROType-IN4002 Diode31-IN4002

Resistors

R222 kQ, +5%, 14 W Resistor110000-223
R312kQ, +5%, % W Resistor110000-123
R4, RS100 kQ, +5%, % W Resistor110000-104
RO22 kM, +5%, 4 W Resistor110000-223
RT12 kQ, +5%, % W Resistor110000-123
R8, R9100 kQ, +5%, 4 W Resistor110000-104
RIO, RIL1kQ, +5%, & W Resistor110000-102
R12, R13100 kO, +5%, 4 W Resistor110000-104
RI4, RIS10kQ,45%, % W Resistor110000103
R16, R1710, +5%, % W Resistor110000-010
R18100 2, +5%, % W Resistor110000-101
RID5.6kQ, +5%, % W Resistor110000-562

(continued on next page)

Page 51

Illustrated Parts Lists System I

Regulator/Audio III Printed-Circuit Board Assembly Parts List, continued

DesignatorDescriptionPart No.
R202.70, +5%, 1 W Resistor110009-027
R21272, 45%, % W Resistor110000-270
R22100.0, +5%, 44 W Resistor110000-101
R230.10, +5%,5 W Resistor116007-001
R245.6kQ, +5%, % W Resistor110000-562
R25-R270.10, +5%, 5 W Resistor116007-001
R282.72, +5%, % W’ Resistor110000-027
R2975 kQ, +5%, % W Resistor110000-752
R313.9kO, +5%, 4 W Resistor110000-392
R322.70, 45%, % W Resistor110000-027

‘Transistors

Q6TIP-32 Transistor33-TIP32
Q7, 98Type-2N3055 Transistor34-2N3055

Miscellaneous

QI, Q2TDA-2030 Amplifier137301-001
Q37815, +15V Regulator37-7815
Q47915, -15V Regulator37-7915
Q5‘Type-LM305 Regulator37-LM305
RI10k Dual Potentiometer119011-103
R301k Horizontal Potentiometer119002-102
swlSPST Slide Switch160024-001

Heat Sink 034531-01 ‘Test Point (Acceptable substitute is part no. 120670-01) 179051-002

4.27

Page 52

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 53

System I

AC Alternating current; from zero it rises to a niaximum positive level, then passes through zero again to 4 maximum negative level.

ACTIVE STATE

‘The true state of a signal, For example:

The active state for START is low.

ADDRESS A value that identifies a specific location of data in memory; normally expressed in hexadecimal notation.

ANALOG Measurable in an absolute quantity (as opposed (0 on or off). Analog devices are volume controls, light dimmers, stereo amplifiers, ctc ANODE The positive (arrow) end of a diode. AMPLIFIER A device used to increase the strength of an applied signal. AMPLITUDE The maximum instantaneous value of a waveform pulse from zero, ASTABLE Having no normal state. An astable de- ¢ will free-run or oscillate as long as ating voltage is applied. The oscillation frequency is usually’ controlled by external circuitry, AUXILIARY COIN SWITCH A momentary-contact pushbutton switch with a black cap located on the utility panel. The auxiliary coin switch adds credits to the game without activating a coin counter.

BEZEL Acut, formed, or machined retention device, such as the conical device used to mount a pushbutton switch to a con- «rol panel, or the formed device used to frame the video display screen BIDIRECTIONAL Able to send or receive data on the same line (e.g., the data bus of a microprocessor). BINARY Anumber system that expresses ail values by using two digits (@ and 1). BIT A binary digit; expressed as 1 or 9. BLANKING Turning off the beam on a cathode-ray tube during rerrace. BLOCK DIAGRAM A drawing in which functional circuitry units are represented by blocks. Very useful during initial troubleshooting. BUFFER 1, An isolating circuit designed to eliminate the reaction of a driven circuit on the circuits driving it(e.g., a buffer amplifier).

  • A device used to supply additional drive capability. BUS An electrical path over wiiich information is transferred from any of several sources to any of several destinations.

CAPACITOR A device capable of stormg electrical energy. A capacitor blocks the flow of DC current while allowing AC current «© pass CATHODE The negative end of a diode. CHIP An integrated circuit comprising many circuits on a single wafer slice. CLOCK A repetitive timing signal for synchronizing system functions.

COINCIDENCE Occurring at the same time. COIN COUNTER AG-digit electromechanical device that counts the coins inserted in the coin, mechanism(s). COIN MECHANISM A device on the inside of the coin door that inspects the coin to determine if the correct coin has been inserted

COMPLEMENTARY Having opposite states, such as the outputs of a flip-flop. COMPOSITE SYNC Horizontal and vertical synchronization pulses that are bused together into a single signal. This signal provides the timing necessary to keep the display in synchronization with the game circuitry. COMPOSITE VIDEO Complete video signal from the game. system to drive the display circuitry,

usually comprising H SYNC, V SYNC,

and the video.

Glossary

CREDIT One play for one person based on the game switch settings. CRT Cathode-ray tube. DATA General term for the numbers, letters, and symbols that serve as input for device processing. DARLINGTON A two-transistor amplifier that provides extremely high gain. pe Direct current, meaning current flowing in one direction and of a fixed value.

DEFLECTION YOKE Electromagnetic coils around the neck ofa cathode-ray tube. One set of coils deflects the electron beam horizcntally and the other set deflects the beam vertically. DIAGNOSTICS A programmed routine for checking circuitry For example: the self-test is a diagnostic routine.

DIODE A semiconductor device that conducts in only one direction. DISCRETE Non-integrated components, such as resistors, capacitors, and transistors. DMA Direct memory access. DMA is a process. of accessing memory that bypasses the microprocessor logic. DMA is normally used for transferring data between the inpuvoutput ports and memory. DOWN TIME ‘The period during which a game is malfunctioning or noi operating correct ly due to machine failure. EAROM Electrically alterable read-only memory (sce ROM). The EAROM is a memory that can be changed by the application of high voltage. FLYBACK A step-up ttansformer used ina display to provide the high voltage.

gl

Page 54

GATE 1, A circuit with one output that responds only when a certain combination of pulses is present at the inputs.

  • A circuit in which one signal switches another signal on and off.

3, To control the passage of a pulse or

signal HARNESS A prefabricated assembly of insulated wires and terminals ready to be attached toa piece of equipment. HEXADECIMAL A number system using the equivalent of the decimal number 16 as a base. The symbols 0-9 and A-F are usually used. IMPLODE To burst inward; the inward collapse of a vacuum tube, vO Input/Output IRQ Interrupt request. IRQ is a control signal to the microprocessor that is generated by external logic. This signal tells the microprocessor that external logic needs attention. Depending on the program, the processor may Or may not respond. LED The abbreviation for a light-emitting diode.

LOCKOUT COIL Directs coins into the coin return box when there is no power to the game. LOGIC STATE The binary (1 or 0) value at the node of a logic element or integrated circuit during, a particular time. Also called the logic level. The list below shows the voltage levels corresponding to the logic states (levels) in a TTL system Logic 9, low = 0 VDC to +0,.8 VDC Grey Area (Tri-State Level) = +0.8 VDC to +2.4 VDC Logic 1, High = +2.4 VDC to +5 VDC MULTIPLEXER A device that takes several low-speed inputs and combines them into one highspeed data stream for simultaneous transmission on a single line. NMI Non-maskable interrupt. NMI is a request for service by the microprocessor from external logic, The microprocessor cannot ignore this interrupt request. PAGE A subsection of memory. A read-only memory device (see ROM) is broken into. discrete blocks of data. These blocks are called pages. Each block has X number of bytes. PCB ‘The abbreviation for a printed-circuit board. PHOTOTRANSISIOR A transistor that is activated by an external light source. POTENTIOMETER

  • A resistor that has a continuously moving contact which is generally mounted on a moving shaft, Used. chiefly as a voltage divider. Also called a pot (slang).
  • An instrument for measuring a voliage by balancing it against a known voltage. RAM Random-access memory. A device for the temporary storage of data. RASTER-SCAN DISPLAY A display system whereby images are displayed by continuously scanning the cathode-ray tube horizontally and vertically with an electron beam. The display system controls the intensity of the electron beam.

RETRACE In a raster-scan display, retrace is the time during which the cathode-ray tube electron beam is resetting either from right to left or from bottom to top. System I

RESISTOR A device designed to have a definite amount of resistance. Used in circuits to limit current flow or to provide a voltage drop. ROM Read-only memory. A device for the permanent storage of data. SIGNATURE ANALYSIS A process of isolating digital logic faults at the component level by means of special test equipment called signature analyzers. Basically, signature analyzers (¢.g., the ATARI® CAT Box) convert lengthy bit streams into four-digit hexadecimal signatures. The signature read by the analyzer at each circuit node is then compared with the known good signature for that node. This process continues until a fault is located.

TROUBLESHOOT The process of locating and repairing a fault. VECTOR A line segment drawn between specific X and Y coordinates on a cathode-ray tube. ‘WATCHDOG A counter circuit designed to protect the microprocessor from self-destruction if a program malfunction occurs. If a malfunction does occur, the counter applies continuous pulses to the reset line of the microprocessor, which causes the microprocessor to keep resetting, X-Y DISPLAY A display system whereby images are displayed with vectors. ZENER DIODE A special diode used as a regulator. Its main characteristic is breaking down at a specified reverse-bias (Zener) voltage.

gl-2

Page 55

SYSTEM 1 Ist printing

YOUR COMMENTS, PLEASE!

Your comments will assist Atari Games, Inc. in improving our publications. The comments are an important part of preparing for revisions of game manuals. Please write in the space below. No postage stamp is necessary if mailed in the USA.

If you have any technical questions about certain ATARI games products, or are requesting additional publications, we will immediately forward your note to the appropriate person.

Page: Comments:

Fillin if you wish a reply.

Name

Firm O Distributor

Address O Operator City State Zip © Other

Area Code Phone

Page 56

Tape This Edge

First Fold

—e

No postage necessary if mailedin the United States

SS as

BUSINESS REPLY MAIL a

FIRST CLASS PERMIT NO. 173 MILPITAS, CA a

POSTAGE WILL BE PAID BE ADDRESSEE es

Atari Games, Inc. rt Attn: Field Service/Coin-Op Division —" 737 Sycamore Drive P.O. Box 906 Le

Milpitas, California 95035 Fe

be

Second Fold

From:

Page 57

System I Ist printing

YOUR COMMENTS, PLEASE!

Your comments will assist Atari Games, Inc. in improving our publications. The comments are an important part of preparing for revisions of game manuals. Please write in the space below.

if you have any technical questions about certain ATARI games products, or are requesting additional publications, we will immediately forward your note to the appropriate person.

Page: Comments:

Fill inif you wish a reply:

Name

Firm O Distributor

Address OC Operator City Country (2 Other Phone: Country Code ___________ Loca} Number

Page 58

‘Tape This Edge

From: First Fold

Attach Necessary Postage

——’

Atari Games, Inc. Attn: Field Service

Tipperary Town, Ireland

Second Fold

Page 59

Warranty

Seller warrants that its printed-circuit boards and parts thereon are free from defects in material and workmanship under normal use and service for a period of ninety (90) days from date of shipment. Seller warrants that its video displays and laser-video disc players (in games supplied with displays and video-disc players) are free from defects in material and workmanship under normal use and service for a period of thirty (30) days from date of shipment. None of the Seller's other products or parts thereof are warranted. Ifthe products described in this manual fail to conform to this warranty, Seller’s sole liability shall be, at its option, to repair, replace, or credit Buyer’s account for such products which are returned to Seller during said warranty period, provided:

  • Seller is promptly notified in writing upon discovery by Buyer that said products are defective;
  • Such products are returned prepaid to Seller's plant; and
  • Seller’s examination of said products discloses to Seller's satisfaction that such alleged defects existed and were not caused by accident, misuse, neglect, alteration, improper repair, installation, or improper testing. Inno event shall Seller be liable for loss of profits, loss of use, incidental or consequential damages. Except for any express warranty set forth in a written contract between Seller and Buyer which contract supersedes the terms herein, this warranty is expressed in lieu of all other warranties expressed or implied, including the implied warranties of merchantability and fitness for a particular purpose, and of all other obligations or liabilities on the Seller's part, and it neither assumes nor authorizes any other person to assume for the Seller any other liabilities in connection with the sale of products by Seller.

The use of any non-Atari parts may void your warranty, according to the terms of the warranty, The use of any non-Atari parts may also adversely affect the safety of your game and cause injury to you and others. Be very cautious in using non-Atari-supplied components with our games, in order to ensure your safety. Atari distributors are independent, being privately owned and operated. In their judgment they may sell parts or accessories other than Atari parts or accessories. Atari Games, Inc. cannot be responsible for the quality, suitability or safety of any non-Atari part or any modification including labor which is performed by such distributor.

Page 60

A

ATARI

GAMES

ATARI GAMES, INC. 1272 BORREGAS AVENUE PO. BOX 3618 SUNNYVALE, CALIFORNIA 94088 (408) 747-2700 * TELEX GRT 3719986 © A wore: conmuncatonscenpany

© 1984 Atari Games, Inc. All rights reserved