CATHODE RAY TOMES

Pole Position ST-218-01 3rd Printing Backdoor Sheet

Pole Position (World) (Namco, 1982) · Backdoor Sheet · 1 pages · original scan

Page 1

This game will test itself and provide data to show that the game’s circuitry and controls are operating properly. The data is provided on the video display

andspeakers.Noadditionalis

necessary. We suggest you perform the self-test procedure when you first set up the game, any time you collect money from the game, when you change game options, or when you suspect game failure. equipment

Locating Failed Components on the Video PCB

‘Symptom AreaPROMCustomRAM

Ic

Large Car Pictures 12,13) Large Sign Pictures tak 13K 12, % Small Cars & Signs 12N,13N

All Cars & Signs12H,11N13H9F,10F
Alphanumerics7N.8MaN
Raceway2L,2M,2N,4L3N@

Background 6N,5K Raceway & Background 5L6L Middle & Sides of Raceway 2B,20,2D All Video 40,7E,2F D+ ware: communications Company Red Ee Green 11D Blue 1c

sy Locating Failed Components symptom Area OM the CPU PCB

‘Custom AtoD

‘Symptom AreaPROMICRAMConverter

Audio Voice 9c 90 Screech/Crash 9E Playe. s Motor 428,12F

All Other Sounds7L,11D,7K,7d

Inputs Brake a'ndlor Accelerator Bu Steering 9K Optica Switches 9K,9M All Other Inputs 3M Control for Audio & Inputs 8H.9H syne 7™ High Scores 7E See CO.218-01 for NAMGO PCB information.

OPTION SWITCH LOCATIONS ON THE CPU PCB SWITCH AT 9JA (Game and price) SWITCH AT 9L {Game and play)

NOTE
CoinOptionInterconnectAssembly

J55A-P55A permits a coin placed in either coin mechanism to register in the same coin counter. The cable connector is located between the coin door harness and the main harness (see the Coin Op-

tionInterconnectWiringDiagramin
SP-218).Whenitisused,leftcoin

mechanism option switches at 9JA apply to both coin mechanisms. If you want different options for the left and right coin mechanisms, remove Coin

OptionInterconnectAssemblyJ55A-

P55A and connect J55 directly to P55. \f you have NAMCO game PCBs, refer to CO-218-01 for the location of the option switches. JUMPER AT 6B (Memory back-up)

Switch Settings for Game and Price Options

Important Note to Operators: If the operation, maintenance and service manual was not included in this game when you unpacked it, contact your distributor to get a free copy. (All Atari manuals for coin-operated games also include complete illustrated parts lists.) pedal Do not depress the accelerator or brake

switching to the Self-Test Mode. This will cause faulty program initialization and incorrect action of the player controls. ‘ST-218-01

CAUTION 3rd printing
whenturningonthegame or

Self-Test Procedure

Instruction Test Passes

  • Without touching the pedal(s), set the self-test switch to the on position. All credits will be cancelled.
  • Press down on the accelerator pedal
  • Press down on the brake pedal of the Sit-Down cabinet.

4, Turn the steering wheel clockwise, then counterclockwise.

o Shift the gear shifter.

Shift the gear shift, press the auxiliary coin switch, and activate the coin switches.

  • Press the auxiliary coin switch.

» }. To end the test, switch the self-test switch to off. Random symbols are displayed on the screen for about five seconds. The self-test display appears. RAMs and ROMS are tested. If the screen is different from the self-test display, or if there are sounds, refer to Chapter 2, Self-Test Procedure.

‘The numbers to the right of ACCEL increase from 00 to somewhere between ‘90 and AQ as you press down on the pedal. If the test fails refer to ter 2.

The numbers to the right of BRAKE switch from 00 to FF. For the Upright cabinet, the numbers to the right of BRAKE should always read 00. If the test falls, refer to Chapter 2. Rotating the whee! clockwise causes the numbers to the right of STEER- ING to increase. Rotating the wheel counterclockwise causes the numbers to decrease. If the test fails refer to Chapter 2. The words to the right of SHIFT change from LO (shifter up) to H/ (shifter down) as you shift gears. If the test fails, refer to Chapter 2. The numbers to the right of SOUND increase from 00 to 20, and a new ‘sound is played with each number. Test all 20 sounds. if the test fails, refer to Chapter 2. Game statistics appear (for a few seconds) at the bottom of the screen. Press the coin switch each time you want to see the statistics. To erase game statistics, simultaneously press down on the accelerator pedal and press the auxiliary coin switch twice. Statistics will be reset at /999/. To reset the high-score table, simultaneously press down on the accelerator pedal and change gear shifter from low to high. The high-score table will be reset and contain fictitious scores.

ALL RAMS GOOD

ACCELERATOR PEDAL cone STEERING = WHEEL ~~~ S TEER ING 00 SOUNDS SOUND

QUALIFYING LAP TIME

RACE DIFFICULTY LEVEL_> EX TENDED. (See Table 1-2)

GAME AUTOMATICALLY STARTS* (When correct number of coins are inserted)

NO. OF GAMES PLAYED

NO. OF SECONDS THAT GAME / HAS BEEN POWERED ON

NO. OF GAMES IN WHICH PLAYER HAS QUALIFIED

NO. OF GAMES THAT REACHED FIRST EXTENDED LAP “If screen displays MANUAL START, ‘suspect the game harness. Refer to the Schematic Package. NO. OF POINTS SCORED (x10) ALL ROMS GOOD

BRAKE PEDAL

SHIFT Lo ———_ GEAR SHIFTER LEFT COIN MECHANISM

RIGHT COIN MECHANISM

NO. OF LAPS: IN THE RACE

(Gee Table 1-2)

S99. | __ came stanistics

NO. OF SECONDS PLAYED NOT APPLICABLE

NO. OF GAMES IN WHICH PLAYER REACHED FINISH LINE

NO. OF GAMES THAT REACHED THIRD EXTENDED LAP

NO. OF GAMES THAT REACHED ‘SECOND EXTENDED LAP

Switch Settings for Game and Play Options Refer to CO-218-01 for switch locations if your game is equipped with NAMCO PCBs.

Settings of &-Toggle Switch on Pole Position CPU PCB (at JA)

87654321Option

‘Settings of &-Toggle Switch on Pole Position CPU PCB (at 91)

87654321

Option

On Off 4 racing laps * 3rracing laps

Off

oft 90 seconds per lap << 100 seconds per lap 110 seconds per lap

Right Coin Mechanism coin for 1 credit << 2 coins for 1 credit * 3 coins for 2 credits 4 coins for 3 credits oft Off On Off

Off On

Left Coin Mechanism

OfOffOff1 coin for 1 credit
OffOffOn1 coin for 2 credits
OffOnOff1 coin for 3 credits
OffOnOn2 coins for 1 credit *
OnOffOff3.coins for 1 credit
OnOffOn3 coins for 2 credits
OnOnOff4 coins for 3 credits *
OnOnOnFree Play

120 seconds per lap *

<Manutfacturer's recommended settings for Upright cabinet 4 Manufacturer's recommended settings for Sit-Down cabinet “This option setting can be changed to 1 coin for 6 credits by changing the program PROM (136014-160). Contact your. distributer for further information. Off Attract Mode sound off On Attract Mode sound on < Off Kilometers per hour On Miles per hour <

Table 1-5 Switch Settings for Qualifying Lap Times

a Self-Test Level

OptionPracticeofBeat This Many Seconds

‘Switches Rank Difficulty to Qualify for Position:

12312345678
OnOffOnidEasy66870737578082
OffOffOnE65¥e67%7072¥2Th4¥e76%7981
OnOnOnH58%6163668707275
OnOnOffD506163iJ67t)14
OffOnOffc<58%6062ao667073
OnOffOff858606264667072
OffOffOffA57%«5861636676ral
OffOnOnaeHard57586163667671