CATHODE RAY TOMES

Title Fight

Title Fight (World) (Sega, 1992) · Manual · 81 pages · 15 sections · original scan

Page 1

1ST PRINTING—AR MMM So Sood Hoe HoH Ho Ko HH HHH HH HHH MoI HoH HHH HH

SEGA

le Fteltt

SEGA ENTERPRISES, LTD.

BEPPPLP PLL PP LL PP PP PP PPP PPP PPP PPP P LE MANUAL NO, 420-6071-01 Ko Ros Ro Kook Ror KK KM KH MH KH KKH KKH KKM KM HK MH H HoH HHH H HHH HH HH BEPLL LLLP PP LR PEEP PPL LLL LLL LPP FPL EPP PPL ELE EL ERE RP

Page 2

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 3

SEGA TITLE FIGHT

Built under license in the UK by Deith Leisure Limited

INTRODUCTION This SEGA TITLE FIGHT is a revised version of the Japanese specification machine detailed in this manual. Some minor changes have been made to adapt the machine for the European market and some key components will be found to be different from those detailed in the original manual.

MODIFICATIONS

Monitors - 2 x Wells-Gardner K7000 25" monitors

Electronic: Coin Controls Sentinel C220 and Deith "Klingon" two player credit board with remote credit display

  • Mechanical: 2 x Coin Controls S10 mechanical coin validators Coin handling

Coin meters - one per coin mech mounted on vts bracket

Switch bracket - modified to Deith Universal vts bracket

modified to Deith Universal multi-switch bracket incorporating: IEC inlet plug; 20mm 5A fuse; integral rfi filter; rocker switch and cherry switch Mains bracket

Power supply - 15A switch mode power supply

  • toroidal multi-tapped transformer

The following pages have been intentionally omitted from this Manual: 56; 57; 58; 59; 73; 74; 75.

Appendix (a) Wells-Gardner 25K7191 Schematic is found at the back of this manual

The basic operation of this machine remains as detailed in this manual.

BECAUSE OF THE NATURE OF THIS GAME IT IS ESSENTIAL THAT ALL FEET ARE PROPERLY ADJUSTED, THE SUB LEG BRACKETS ARE FITTED, AND THE STOPPER BRACKET IS FIXED CORRECTLY BEFORE ATTEMPTING TO PLAY THE MACHINE. (Refer to pages 6 & 7 for further information)

DEITH LEISURE LIMITED (April 1993)

This information is subject to change without notice

Page 4

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 5

INTRODUCTION OF THE OWNER'S MANUAL

SEGA ENTERPRISES, LTD., supported by its high electronic technology of LSIs, microprocessors, etc. and a wealth of experience, has for more than 30 years been supplying various innovative and popular game machines to the world market. This Owner's Manual is intended to provide detailed descriptions together with all the necessary information covering the general operation of electronic assemblies, electromechanicals, servicing control, spare parts, etc. as regards TITLE FIGHT, a new SEGA product.

This manual is intended for those who have knowledge of electricity and technical expertise especially in ICs, CRTs, microprocessors, etc. Carefully read this manual to acquire sufficient knowledge before working on the machine. Should there be a malfunction, non-technical personne! should under no circumstances touch the interior system. Should such a case arise, contact

our Main Office or the closest branch office listed as follows:

SEGA ENTERPRISES, INC. (U.S.A. ) 45133 Industrial Drive, Fremont, California 94538, U.S.A. hone : (415) 802-3100 Fax: (415) 802-1754

SEGA AMUSEMENTS EUROPE LIMITED nit 2 Industrial Estate, Leigh Close, New Malden, Surrey KT3 3NL,

ngland hone : (081) 336-2256 Fax : (081) 336-1715

SEGA SOUTHERN EUROPE LIAISON OFFICE Calle Vallellano, 19-23, 1° A, 37008-Salamanca, Spain

hone : (923) 265893 ax: (923) 265913

Page 6
  • PREVENTION OF COUNTERFEITING AND CONVERSION

LABELLING To prevent counterfeits and conversions, the following labels are put on all the SEGA products. When handling such goods, be sure to confirm the labels. They are used to prevent illegal acts such as the unauthorized copying of the products and the printed circuit boards thereof or carrying on business by manufacturing similar merchandise or by converting, selling or using such products or printed circuit boards.

ORIGINAL SEAL LICENSE SEAL

The following seal is put on the The following seal is put on all machines manufactured by SBGA. SEGA kits, such as the printed circuit boards.

AY SF IEE ORIGINAL SEAL)” ‘wis PRODUCT AE AND MANUFAC sta exten BOS st sak LICENSE SEAL Tos raooue® 16 Manuracrunt® UNDER

COPYRIGHT NOTICE

This SEGA product has the copyright notice as follows:

© SEGA 1992

This signifies that this work was disclosed in 1992 and is the property of

SEGA ENTERPRISES, LTD.

Page 7
  • PRECAUTIONS CONCERNING INSTALLATION LOCATION

The TITLE FIGHT is an indoor game machine. Absolutely do not install it outside. Even indoors, avoid installing in places mentioned below so as to ensure proper usage: .

+Places subject to rain or water leakage, or condensation due to humidity. + In the proximity of an indoor swimming poo! and/or shower. +Places subject to direct sunlight. +Places subject to heat sources from heating units, etc., or hot air. + Vicinity of highly inflammable/volatile chemicals or hazardous matter. + Sloped surfaces. + Vicinity of anti-disaster facilities such as fire exits and fire extinguishers. +Places subject to any type of violent impact. «Dusty places.

INSTALLATION PRECAUTIONS

  • Do not insert more than one electrical plug into the power plug socket.
  • The per unit standard voltage/amperage is 200~240V/3A.
  • If an extension cord is to be used, use a cord of 7A or higher rating.

Electric current consumption

MAX. 1.55A (AC220V 50Hz)

MAX. 1.48A (AC220V 60Hz) MAX. 1. 41A (AC240V 50Hz)

MAX. 1. 35A (AC240V 60Hz)

Page 8
  • NAME OF PARTS

ASSY BILLBOARD COM BILLBOARD PLATE HWC

HWC-1100 423-0187

LAMP COVER BLUE = LAMP COVER RED

HWC-1107 HWC-1108

es 26 INCH MONITORS ASSY CONTROLLER BLUE = =

HWC-2230 — =

ASSY CONT PNL LEFT

HWC-2000

FRONT DOOR

HWC- 1005

COIN CHUTE DOOR

BILLBOARD REAR DOOR

HWC-1103

UPPER DOOR

HWC-1004 ASSY CONTROLLER RED

HWC-2240

ASSY CONT PNL RIGHT

HWC-2100

COIN ENTRY

ASSY CABI HW

HWC-0100

BACK DOOR

HWC-1003

AC UNIT

HWC- 1026

Widthx Depth X Height Weight Cabinet 1, 710mm 975mmX 1, 618mm | 181 kg. Billboard 1, 240mm 200mmx 432mm| 11 kg. Complete Cabinet | 1,710mmXx 975mm x 2, 042mm | 192 kg.

Page 9

&

  • ACCESSORIES

. PART No. Qty DESCRIPTION REMARKS

420-6071-011 | OWNERS MANUAL TITLE FIGHT ENGTLE FIGHT OWNER’ S MANUAL, ENG.
509-54662 | SW MICRO TYPE (AM50033C5)or spare
514-5036-50001FUSE 6.4¢ X30 5000mA 125Vor spare

540-0006-01 1 | WRENCH FOR TAMP PRF SCR DUAL TYPE M4 | Tool .540-0007-01 1 | WRENCH FOR TAMP PRF SCR DUAL TYPE M5 | Tool 540-0009-01 1 | WRENCH FOR TAMP PRF SCR DUAL TYPE M8 | Tool

HWC-20142 | CAP COVER REDFor spare
HWC-20152 | CAP COVER BLUEor spare
HWC-22152 | RUBBE!or spare
220-53812 | MASTER KEYor opening/closing the doors

2 | KEY For the CASHBOX DOOR HWC-0001 2 | SUB LEG BRACKET HWC-0004 ] STOPPER BRACKET

(TAMPERPROOF WRENCH) M4 540-0006-01 M5 540-0007-01 M8 540-0009-01

Page 10
  • METHOD OF INSTALLATION AND ASSEMBLY

The following procedure applies when the disassembly of BILLBOARD is

required for the installation of the machine.

@ Take off the 2 SCREWs to remove the BILLBOARD’ s REAR DOOR.

@ By using the 2 HEXAGON BOLTS from the inside of the BILLBOARD, secure the

BILLBOARD and the CABINET.

@ Connect the 2 CONNECTORS.

@® Install the BILLBOARD's REAR DOOR by securing it with 2 SCREWs.

TRUSS SCREW (2)

M4x25, chromeplated BILLBOARD REAR DOOR

HWC-1103 2 a ae HEXAGON BOLT (2) M8X35, using flat & spring washers

__ ASSY CABI HWC

HWC-0100

SUB LEG BRACKET SS HWC-0001 / \. WOOD SCREW, chromeplated (4) 3.5X 16, w/flat washer 7 Hl chr

EXAGON BOLT, chromeplated (4) FD STOPPER BRACKET

N8X35, using flat & spring washers Ge HWC-0004

FLAT WASHER, chromeplated (2)

8.5-22x1.6

HEXAGON BOLT. chromeplated (2)

N8x35, w/spring washer

Page 11

® Inamanner as shown, cause the 4 LEG ADJUSTERs (on the bottom of the cabinet) to come into contact with the floor and make sure that there is

a gap of 5 mm between the casters and the floor, and that the cabinet is

in level position.

® Secure each of the 2 SUB LEG BRACKETs by using 4 BOLTs and 4 SCREWs.

@ Secure the STOPPER BRACKET with 2 BOLTs and 2 FLAT WASHERs.

Make sure that no LEG ADJUSTER is lifted above the floor. If any LEG

ADJUSTER is lifted above the floor, cause it to make contact with the

floor so that the cabinet can be adjusted to a level position.

CASTER Pt id

Onn | t ‘s

Approx. 5 mm

\ LEG ADJUSTER BOTTOM VIEW

Page 12
  • CONTROLLER

7-1 RUBBER REPLACEMENT (only when it is damaged) @ Take off the 7 TANPERPROOF SCREWs which secure the CONTROL PANEL, and open the CONTROL PANEL.

NOTE : The torque required for fastening a TAMPERPROOF SCREW is 100 kgf+cm. (tightly fasten with a wrench and note that it should not be loosened by using a screwdriver).

WRENCH TAMPERPROOF SCREW (7)

M8 x20

Page 13

@ Take off the SNAP RING from the SHAFT’ s end to replace the RUBBER.

CAUTION: Be very careful so that the sequential order of the FLAT WASHER and the SPACER should not be confused.

SNAP RING

for 14mm SHAFT

FLAT WASHER NM | OS y, SPACER

RUBBER i HWC-2215 i

RUBBER HOLDER | 4 HWC-2211

Page 14

7-2 MICRO SWITCH REPLACEMENT

@® From the CONTROL PANEL, take off the 4 HEXAGON BOLTs, 2 HEXAGON NUTs

and 2 CARRIAGE BOLTs to remove the STOPPER BRACKET.

@ Take off 2 SCREWs and replace the MICRO SW.

HEXAGON BOLT (4)

M6X 16, w/spring washer

eo U NUT (2) M6

STOPPER BRKT

& /-—“HiC-2208 “Ox

SW MICRO TYPE

509-5466

M3x 16

Page 15

7-3 REMOVING THE CONTROLLER

@ Take off the CAP COVER from the upper part of the GRIP, take out the

TAMPERPROOF SCREW from the inside and remove the GRIP CAP.

@ Take off the U NUT, GRIP, GRIP COVER and OUTER COVER.

TAMPERPROOF SCREW

O — M4 x12 & GRIP CAP ‘Ze ———_ HWC-2007 or HWC-2011 U NUT CAP COVER i

HWC-2014 HWC-2015 2 FLAT WASHER

MLO

GRIP COVER

HWC-2006 or HWC-2010

é

. J OUTER COVER

‘ HWC-2004 \=*

V

GRIP

HWC-2005 or HWC-2009

Page 16

Take off the 5 HEXAGON NUTs which secure the CONTROLLER and remove the

5 CARRIAGE BOLTs.

Disconnect the CONNECTOR (white 6p) to enable the CONTROLLER to be

removed from the CONTROL PANEL.

U NUT G)

NG

CONTROLLER UNIT

HWC-2200

| \. CONTROL PANEL | | HWC-2001X

\ CARRIAGE BOLT (5)

M6 x 20

Page 17
  • REPLACEMENT OF FLUORESCENT LAMP, AND LAMPS

In a manner as shown below, remove the parts and replace the Fluorescent

lamp and Lamps.

TRUSS SCREW (4)

M4x12, chromeplated BILLBOARD PLATE HWC

423-0187

FLUORESCENT LAMP 32W LAMP 110VI5W

390-5257

Page 18
  • ADJUSTMENT OF THE 26" MONITOR

Do not operate the ADJUSTMENT knobs without good reason. .

Also note that should any adjustment be required, first take off the 6 TANPERPROOF SCREWs, remove the MASK HOLDER and FRONT MASK, then make

adjustment.

TAMPERPROOF SCREW (6)

M4x16, chromeplated

ASSY FRONT MASK BLUE

HWC-1011

CAUTION FRONT MASK HOLDER ‘: HWC-1013

ASSY FRONT MASK RED

ES [Sh HWC-1010

ao

MONITOR V.R.BD_ ia (FRONT V.R.) 26" MONITOR

  • A certain portion of the monitor is subject to a high voltage and therefore, be very careful of this point.
  • When making adjustment, utilize a resinous Alignment Screwdriver.
Page 19

THE PRISMATIC™ BY WELLS-GARDNER

COLOR SPECIFICATIONS

CRT e@ From 9” to 25” diagonal measure @ P22 phosphor © Polished faceplate standard: variety of optional faceplates and transmittances available. © Stripe trio spacings (standard): 0.62 mm (9”), 0.66 mm (13°), 0.82 mm (19’’), 0.82 mm (25”). © Optional finer pitches available.

INPUT SIGNALS

© Video: RGB analog, 1v to 5v peak-to-peak (adjustable with contrast control), 4.7k ohm input impedance, 40 usec to 50 usec active video. Optional inputs available: Negative video RGB analog 0-0.75v, 75 ohm input impedance Composite video (NTSC) Both composite video and RGB analog: Both signal sources can be connected to the monitor at the same time. Monitor display can be switched from one to the other, at anytime at pixel or vertical frame rate. Sync: TTL positive or negative going, separate or composite. Input impedance: 20K ohms for positive going sync; 12K ohms for negative going sync.

HORIZONTAL SCAN

© Width: Adjustable with just one coil to accommodate active video from 40 usec to 50 usec. © Frequency: 15.1 kHz to 16.8 kHz standard; higher scan frequencies avaliable. © Linearity: + 5%

PICTURE SIZE REGULATION © 2%

VERTICAL SCAN

e Frequency: 47 Hz to 63 Hz @ Linearity: + 5%

GEOMETRIC DISTORTION

@ £ 2% (max). VIDEO CHARACTERISTICS ® Bandwidth (-3 db): 12 MHz typical © Rise Time: Less than 50 nanoseconds ® Overshoot (max): 5%

MECHANICAL

¢ The 19” monitor is also available in universal mount brackets. The monitor can be mounted in the user's cabinet horizontally or vertically. Contact your sales representative for details. © The standard Prismatic-25™ 25" monitor is available as a kit - without a frame. Custom frames can be furnished.

¢ The standard Prismatic-9™ 9° monitor is available as a kit - without a frame: Also available in chassis form

  • adaptable to individual customer requirements. ¢ Contact your sales representative for details.

USER ADJUSTABLE CONTROLS AND ADJUSTMENTS

© Brightness, Contrast, Horizontal Hold, Horizontal Size, Horizontal Raster Position, Horizontal Video Position, Vertical Hold, Vertical Size, Vertical Raster Position, Focus. Custom Control Location available.

POWER INPUT © 120 VAC +10% -15%, 50-60 Hz, 85W (max). Isolation transformer required; furnished with monitor as an option.

ENVIRONMENTAL CONDITIONS © Operating temperature 0° to 55°C. Complies with U.L., C.S.A., and D.H.H.S. radiation performance standard (composite video).

RESOLUTIONS © Standard CRT © Fine Pitch CRT 9” 280 Pixels x 240 Lines 410 Pixels x 240 Lines 13” 400 Pixels x 240 Lines 640 Pixels x 240 Lines 19” 400 Pixels x 240 Lines 640 Pixels x 240 Lines 25” 560 Pixels x 240 Lines N.A.

**** SPECIFICATIONS ARE SUBJECT TO CHANGE IN ORDER TO ASSURE YOU THE LATEST IN DISPLAY TECHNOLOGY.****

Page 20

USER ADJUSTMENTS

  • BRIGHTNESS CONTROL VR6 This control has been preset at the factory. However, when the video signal is applied to the monitor, a slight adjustment may be desired. Adjust this control such that the illumination is just barely extinguished from portions of the display which should be black.
  • CONTRAST CONTROL VR7 GREEN DRIVE Adjust the contrast contro! for the desired picture intensity. ee GREEN BLU CUT OFF .
  • FOCUS CONTROL ne dene Orr Adjust the focus control, located on the high voltage unit RED HORIZ RASTER
(11), for maximum over-all definition and fine picture detail.CUT OFFSPOSITION

4, HORIZONTAL HOLD CONTROL VR2 yO With the monitor being driven with the display signal, con- (7 /— FUSE ~ 4 TPS

nect one jumper between TP1 and TP2 and another jumperfSe|TP4
between TP3 and TP4. Adjust the horizontal hold control;v3

until the picture stops sliding horizontally. Remove the BLU DRIVE > SHUT

jumpers. Do not use the horizontal hold control for hori-~=DOWN
zontal centering. (See #5).i!
NOTE: If the sync signal is composite, use the horizontal>A
sync input of the same polarity as the compositeZa}~V.SYNC

sync signal. Focus me HSYNC

5. HORIZONTAL VIDEO SHIFT CONTROL VR1MoRIZ VIDEO: aGa syne
Use this control to center the picture horizontally.WORTELE:~+V. SYNC
6. HORIZONTAL RASTER POSITION ADJUSTMENTVERT RASTER POS|

If the picture is off center horizontally (long dimension of eae thio /]

picture tube), some compensation can be made by movingBRIGHTNESSCONTRAST

the horizontal raster position adjustment jumper either to positions “R” or “L”.

  • HORIZONTAL SIZE COIL L1 FIG. 1A The horizontal size coil is a hexagonal tuning tool adjustment. This contro! must be adjusted slowly, if necessary, until the picture or test pattern attains the correct horizontal proportions.
  • VERTICAL HOLD CONTROL VR5 Adjust this control until the picture stops rolling and it locks in vertically.
  • 50-60 Hz CONTROL VR9 This control is used to limit the range of vertical size. This control is preset at the factory and should not require readjustment unless the vertical size control or vertical hold control are readjusted from their original factory setttings. In order to set this control, first adjust the vertical size control so that the picture is slightly larger than desired. Turn VRQ so that any vertical foldover which may be present will disappear. If the monitor is to be operated alternately at more than one vertical frequency, then perform this adjustment at the higher frequency.
  • VERTICAL SIZE CONTROL BLUE DRIVE

HORIZ RASTER POSITION FUSE x TPS TP

This control must be adjusted slowly, if necessary, until the SCREEN: picture or test pattern attains the correct vertical proportions. HORIZ VIDEO: 11, VERTICAL RASTER POSITION CONTROL VR3 HORI? Hee If the video is off center vertically, (short dimension of pic- VERT RASTER POS: ture tube) some compensation can be made by turning VERT SIZE the vertical raster position control. VERT HOLD

12. CUT OFF AND DRIVE CONTROLS ON NECK——eZz

BOARD VR201, VR202, VR203, VR204, VR205, VR206. These controls have been preset at the proper gray scale. FIG. 1B Before adjusting any of these controls, refer to Troubleshooting Note 4 and to the White Balance procedure.

Page 21
  • DESCRIPTION OF SW UNIT

Open the coin chute door and you will see the switch unit as shown in the

photo.

—TEST BUTTON : For the handling of the test button, refer to the section

on test mode.

—SERVICE BUTTON : Gives credits without registering on the coin meter.

—DEMAGNETIZER SWITCH : Eliminates color unevenness from the screen.

~VOLUME CONTROL : Controls the speaker volume.

Page 22
  • TEST MODE

This mainly checks if the operation of the game BD is accurate, and allows

for COIN ASSIGNMENTS/GAME ASSIGNMENTS setting adjustments. Also, monitor color adjustments can be made in this mode. The screen displays and operation (moves) are identical on both of the

monitors. The TEST and SERVICE buttons function for both the left and right

monitors in the same manner.

Selection of TEST ITEMS

  • Push the TEST SW to cause the following TEST ITEM MENU to appear:
  • By pus
  • When t

ring “CONTI utton.

the SEI

When EST MENU NDIVIDUAL MEMORY TEST INPUT TEST SOUND TEST C.R.T. TEST GAME ASSIGNMENTS COIN ASSIGNMENTS BOOKKEEPING BACKUP DATA CLEAR OUTPUT TEST

  • EXIT SELECT BY SERVICE BUTTON AND PUSH TEST BUTTON “

ing the SERVICE SW, bring the arrow mark “>” to the desired

item and press the TEST button.

e test has been completed, bring “-" to EXIT and push the TEST

“—>" to “INDIVIDUAL” and push the TEST button to change it to UE.”

ringing “>” to “CONTINUE” and pushing the TEST button without pressing

VICE button will change the screen sequentially. NDIVIDUAL” is selected, only the item pointed by “~” is tested.

Page 23

@ MEMORY TEST Check the PCB's MEMORY ICs.

Entering this test mode causes the test to be executed automatically. Once the test begins, you can not exit from the test until it is finished. During the test, irregular status: may appear on the screen. However, this is not malfunctioning. The test time required is approximately 45 seconds. If the irregular status continues in excess of this period, it may be considered some sort of malfunctioning. Upon completion of the test, “GOOD” will be displayed for the normal IC's and “BAD” will be displayed for the malfunctioning IC's.

MEMORY TES’

<ROM>

C39 «G00!1¢40G00!

<RAN>

ClG001C2G00!C3G00}
C4 —s G00)1C21G00C54GOOD
C57 ~—«G00)1c58G00C60 = GOOD
C61 «G00!1C67G00C68 = G00!
C70 ~— G001€115 G00C116 G00
C117 «G00!1118 G00C120 ~—- G00!
C121 GOOD1c122 G00C123 G00

PUSH TEST BUTTON TO EXIT

Push the TEST button to have the MENU return on to the screen.

Page 24

@ INPUT TEST

This test displays the state of each switch. If the switch goes ON when activated, it is satisfactory.

INPUT TEST.

BLUERED— (A)
LEFT RIGHTLEFT RIGHT—— (B)
UOFFOFFOFF = OFF
DoWOFF = OFFOFF = OFF
RIGHTOFFOFFOFFOFF
LEFOFFOFFOFFOFF

BLUE RE

START-1POFFOF— (Cc)
START-2POFOFF—— (dD)
SERVICEOFOFF— (B)
TESOFOFF—— (F)
COINOFFOF— (6)

PUSH TEST BUTTON TO EXI

(A) BLUE sree he left side Player RED he right side Player (B) LEFT he left-hand side controller of each control panel RIGHT -- he right-hand side controller of each contro! panel (C) START-IP +++ START button for IP (D) START-2P +++ START button for Player vs. player (BE) SERVICE +--+ SERVICE BUTTON (PF) TEST verre EST BUTTON (G) COIN sree COIN SWITCH

Push the TEST button to have the MENU return on to the screen.

Page 25

@ SOUND TEST

This allows sound used in the game to be tested.

Pressing the SERVICE BUTTON increases the number by one and changes the

sound,

SOUND TEST

No. 0

SELECT BY SERVICE BUTTON

PUSH TEST BUTTON TO EXIT

Push the TEST button to have the MENU return on to the screen.

Page 26

@ C.R.T. TEST

I. RGB COLOR ADJUSTMENT SCREEN

This page allows for checking the monitor color check. Each of the R (red), G (green) and B (blue) colors is most dark at the

left-hand end and becomes brighter in 31 gradations towards the right-hand end. he monitor brightness is satisfactory if the white

color bar is black at the left-hand end and wi ite at the right-hand end.

C.R.T. TEST PAGE 1/2

RE

GREEN

BLUE

WHITE

PUSH TEST BUTTON TO EXIT

Pressing the TEST button causes the screen to

  • MONITOR SIZE ADJUSTMENT SCREEN proceed to the next page.

This page allows the monitor size to be checked. Make adjustments in a

manner so that the checkered portions for checking do not go beyond the

screen.

C.R.T. TEST PAGE 2/2

PUSH TEST BUTTON TO EXIT

Press the TEST button to have the MENU return on to the screen.

NOTE: For monitor adjustments, refer to 9. ADJUSTMENT OF THE 26”

MONITOR.

Page 27

@® GAME ASSIGNMENTS In this mode, the setting of game difficulty levels, etc., can be changed.

Selection of DESIRED ITEM

  • Press the SERVICE button to move the “>” and bring it to the desired

item.

  • Press the TEST button to change the setting.
  • After the desired setting is finished, bring the “>” to “EXIT” and

press the TEST button.

GAME ASSIGNMENT

GAME DIFFICULTY 4

EASY HAR!

MONITOR FLIP NORMAL

ADVERTISE SOUND OFF

GAME TIME (1P) 1NO00S

GAME TIME (VS) 1M30S

BREAK INTO ON

WINNER CONTINUE OFF

  • EX!

SELECT BY SERVICE BUTTON AND PUSH TEST BUTTON

  • (A)

—— (B)

  • (C)
  • (D)

—— (B)

  • (F)
  • (6)

(A) GAME DIFFICULTY Sets the game's overal

varies dependng on eacl difficulty. The GAME DIFFICU! (1~7). e PUNCH power of the computer as against the player

step. (For details, refer to TABLE 11-5. The GAME DIFFICULTY is set to Step 4 as a standard. ) TY has 7 steps

TABLE 11-5 SETTING THE GANE DIFFICULTY IFFICULTY 1 2 | 3 4 5 6 7 punch |-75%|-so%|-25%| 0 |+50%|ri00M+150%

Page 28

(B)

(C)

(D)

(E)

(F)

(G) MONITOR FLIP

Determines whether the screen is to be reversed or not.

Setting is made either to NORMAL or REVERSE. (The standard setting is made to NORMAL. )

ADVERTISE SOUND

Determines whether ADVERTISE SOUND is to be emitted or not by

setting to ON when emitting it and to OFF when not emitting it. (set to OFF in the standard setting).

GAME TIME (1P)

Determines the actual time corresponding to the 1 ROUND 3 minutes virtual time for 1P mode. The actual time is set between a maximum

of 3M00S and a minimum of 1M00S in 5 steps in increments of 30 seconds (the standard setting is made to 1MOOS).

GAME TIME (VS)

etermines the actual time corresponding to the 1 ROUND 3 minutes virtual time for Player vs. Player mode. The actual time is set etween a maximum of 3M00S and a minimum of 1MO0S in 5 steps in increments of 30 seconds (the standard setting is made to 1M30S).

REAK INTO

Determines whether Buy-in competition is allowed or not. Set to ON when it is allowed and to OFF when not allowed. (The standard setting is made to ON.) he mode enables the winner to unconditionally continue the game. However, in the case of a draw, both of the players are treated as losers.

WINNER CONTINUE

Determines whether, in the Player vs. Player (from the beginning), the winner is allowed to continue game as 1P against the computer. Setting is made to ON when said continue game is allowed and to OFF when not allowed. (The standard setting is made to OFF.) Regardless of this setting, however, the BREAK INTO (Buy-in) mentioned in Item (F) above, enables the winner to continue game.

Page 29

@® COIN ASSIGNMENTS

In this mode, the COIN/CREDIT setting, etc. can be changed.

SELECTION OF DESIRED ITEM

1) 2)

3) Press the SERVICE button to move “->" and bring it to the desired item.

Press the TEST button to change the setting. After the desired setting is finished, bring the “>” to “BXIT” and

press the TEST button.

COIN ASSIGNMENTS

COIN CHUTE TYPE INDIVIDUAL

CREDIT TO START 1 CREDIT — (A)

COIN/CREDIT SETTING #1 — (B) COIN CHUTE 1 CO 1 CREDIT

MANUAL SETTING — (Cc)

SELECT BY SERVICE BUTTON AND PUS: ST BUTTON

COIN ASSIGNMENTS

MANUAL SETTING

COIN TO CREDIT COIN 1 CREDIT — (Dd)

BONUS ADDE NO BONUS ADDER | —— (EB)

COIN CHUTE MULTIPLIER COIN COIN COUNTS AS 1 COIN — (F) 123 45 678 9 123 45 67 8 9 CREDIT

SELECT BY SERVICE BUTTON AND PUSH TEST BUTTON

Page 30

(A)

(B)

(Cc)

(D)

(F) CREDIT TO START Sets the number of CREDITs required when starting the game (1 CREDIT,

2 CREDITS). Even when set to 2 CREDITS, you can CONTINUE with 1 CREDIT (set to 1

CREDIT in the standard setting).

COIN/CREDIT SETTING Sets the CREDIT increase increment per coin insertion. There are 26

settings from #1 to #26, expressed in OO CREDIT as against OO

COINS inserted. #26 refers to FREE PLAY (SETTING #1 in the standard setting). Also, there are some setting numbers not shown in the INDIVIDUAL setting (for details, refer to Table 11-6-1).

MANUAL SETTING he CREDIT’ s incremental increase settings as against a coin insertion are shown in further details than in (B) --- for details, refer to ‘able 11-6-2. Also, note that when this MANUAL SETTING is performed,

the COIN/CREDIT setting becomes ineffective.

COIN TO CREDIT

etermines COIN/CREDIT setting. or CREDIT TO START and CREDIT TO CONTINUE, refer to (A) above.

ONUS ADDER his sets how many COINS should be inserted to obtain one SERVICE COIN.

COIN CHUTE MULTIPLIER

his sets how many tokens one COIN represents.

Page 31

—lZ— > fal fea} fad 9@# ONILILIGAS na € Noro eauconesneaucs] nNnnn is3] ZZZ. eNO TIO b2# ON LLAsS NO mw Aw @c# ON LLas cx) Zz mw 13@# ON LLas HOw | aw Nin NnNn! nn!) nnn Zz aA 61# ON LLas fea] on a co + ON LLas

t alasljaanaaslaagsanas]angnaa io) elelewee | ee | eee | eee | on Zz oO LI# ONILLGAS O}O;,oO}]OOOO}O00 1000} OO00O0 | A wn fe] oo E a ieanes we 1S) Oo}/O0}O0}]0000/00/000;00000 | & OfoO}foO};]oOoOOO JOO] OOO |] COOO0O oO oO aN Sl# ON LLas Lidaqaguo SNIOO@ @l# ON LLaAS SLIGauyo9g OoT Tl# ON LLas SLIGG4os ool O1# ON LLaAs SLIGaQuor 1OO0T 6# ONILLAS SLIGguoe ool # ON LLas SLIGG4o@ Oot 9# ON LLas LIGddaol Oo # ON LLIS LAH NIOD $ NOMLVLS HOVE ONTLLGS JO SAWN (4dAL WACTATONT @.LNHO NI00) ONTLEGS LIGYO/NIOO + I-9-I1 GTaVL

Page 32

TABLE 11-6-2 : MANUAL SETTING

COIN TO CREDIT 1COIN CREDIT

2CO iS) CREDIT

3COINS CREDIT

4CO S CRED

5CO Ss CREDI

6COINS CRED

TCOINS CREDIT

8CO Ss CRED

9COINS CRED

BONUS ADDER NO BONUS ADDER

2 COINS GIVE EXTRA CO}

3 COINS GIVE EXTRA COI

4 COINS GIVE EXTRA COI

5 COINS GIVE EXTRA COl

6 CO S GIVE 1 EXTRA CO!

7 COINS GIVE EXTRA COI

co S GIVE EXTRA COl

9 COINS GIVE EXTRA COl1

COIN CHUTE co COU S AS co MULTIPLIER col COUNTS AS 2 CO S

COIN COUNTS AS 3 CO S

1 co COUNTS AS 4 COINS

COIN COUNTS AS 5 COINS

1 CO COUNTS AS 6 COINS

col COUNTS AS 7 COINS

1 COIN COUNTS AS 8 COINS

COIN COUNTS AS 9 COINS

Page 33

@ BOOKKEEPING This mode allows each of the CREDIT/TIME/GAME data to be ascertained.

(A)

(B)

(C)

(D)

(E)

(F) BOOKKEEPING, 1/2

COIN CHUTE #1 COIN CHUTE #2 TOTAL COINS coco

COIN CRED! SERVICE CREDIT TOTAL CRED! T S S S ooo

NUMBER OF GAMES 0

TOTAL TIME OD OH OM 0S GAME PLAY TIME OD OH OM 0S AVERAGE GAME TIME OH OM OS LONGEST GAME TIME = OH OM 0S SHORTEST GAME TIME OH OM 0S

PUSH TEST BUTTON TO CONTINUE

COIN CHUTE #1 Displays the COIN IN frequency of the COIN CHUTE for the left side

player. COIN CHUTE #2 Displays the COIN IN frequency of the COIN CHUTE for the right side

player. OTAL COINS

‘otal operation count of coin chutes. (A)+(B)

COIN CREDITS umber of CREDITs registered by COIN insertion only.

SERVICE CREDITS

he SERVICE SWITCH usage frequency.

TOTAL CREDITS

otal number of CREDITS.

(D)+(B)

NUMBER OF GAMES

Total games played.

Page 34

a)

(1)

(J)

(kK)

(L) TOTAL TIME

Total time the machine is energized.

GAME PLAY TIME

Total game playtime.

AVERAGE GAME TIME

Average game playtime.

LONGEST GAME TIME

Longest game playtime.

SHORTEST GAME TIME

Shortest game playtime.

BOOKKEEPING 2/2

TIME HISTOGRAM 0’ 00" ~ 0’ 59” 0 1’ 007 ~ 1’ 29" 0 1’ 30" ~ 1’ 59” 0 2° 00" ~ 2° 29" 0 2’ 30" ~ 2’ 59” 0 3° 00" ~ 3° 29" 0 3° 30" ~ 3° 59” 0 4’ 00" ~ 4’ 29" 0 4’ 30" ~ 4’ 50” 0 5’ 00" ~ 5’ 59” 0 6’ 00" ~ 6’ 59” 0 7’ 00° ~ 7’ 59” 0 8’ 00" ~ 8’ 59” 0 9’ 007 ~ 9’ 59” 0 OVER 10’ 00" 0 PUSH TEST BUTTON TO EXIT

This screen displays the breakdown bookkeeping of the play time per play in the form of histogram. When setting the GAME DIFFICULTY, etc., refer to this as a standard.

Pressing the TEST button causes the MENU to return on to the screen.

Page 35

BACKUP DATA CLEAR

Clears the contents of BOOKKEEPING.

BACKUP DATA CLEAR

YES (CLEAR)

> NO (CANCEL)

SELECT BY SERVICE BUTTON PUSH TEST BUTTON

When clearing, bring “>” to “YES” and when not clearing, to “NO”, by

using the SERVICE SW, and then push the TEST button. Bring “—" to “NO” and press the TEST button to cause the MENU mode to

return on to the screen.

When the data has been cleared, “COMPLETED” will be displayed and the MENU

mode returns on to the screen.

Page 36

@® OUTPUT TEST In this mode, the lighting test of CORNER and START lamps can be performed.

Selection of TEST ITEM

  • Press the SERVICE button to move the “>” and bring it to the desired

item.

  • Press the TEST button to change the setting.
  • After the desired setting is finished, bring the “>” to “EXIT” and

press the TEST button.

OUTPUT TEST

BLUE CORNER LAM OFF — (A) ED CORNER LAM OFF —— (B)

BLUE BUTTON 1P LAMP = OFF — (Cc) BLUE BUTTON 2P LAMP = OFF —— (dD) ED BUTTON 1P LAMP = OFF —— (BE) RED BUTTON 2P LAMP = OFF —— (F)

  • EXIT

SELECT BY SERVICE BUTTON AND PUSH TEST BUTTO

(A) BLUE CORNER LAMP ss+ssreeee* e BILLBOARD’ s left-hand side lamp

(B) RED CORNER LAMP he BILLBOARD’ s right-hand side lamp

(C) BLUE BUTTON 1P LAMP +++++-+-- The left-hand side 1P START button

(D) BLUE BUTTON 2P LAMP -++-----+ e left-hand side 2P START button

(E) RED BUTTON 1P LAMP vrse++ he right-hand side IP START button

(F) RED BUTTON 2P LAMP ss++-+++- e right-hand side 2P START button

Page 37
  • GAME BOARD

12-1 COMPOSITION OF GAME BOARD

U.S.A. OTHERS GAME BOARD NO. [834-9324-01 834-9324-02 @® ROM BD NO. 834-9413-01]834-9413-02 @ MAIN BD NO. 837-8676 (SYSTEM MULTI 32)

When the SERVICE DOOR on the lower left side of the cabinet’s front part

is opened, the SHIELD CASE appears. The GAME BD is contained in the

SHIELD CASE.

SHIELD CASE

Page 38

OM LOCATION

1c3 1Ci0

3MPR-15381114icsMPR-15371
=ictMPR-15379 MPR-15375 ae
BS\|8 mpretes821c221023MPR-15372

PEE MPR-15380 MPR-15376

=16361637

8 EPR-15386 or 8 EPR-15388 1C38 & MPR-15373

8\\ls&16391c40

8 3 EPR-15387 £ ot EPRL15309 1c41 ; ,_ (MPR-18974

837-9413-01 or837-9413-02

UMBER © LOCATION MAIN WORK OTHERS 1C3 EP R-15386 | E P R-15388 2M Tc EP R-15987 | EB P R-1538 mm | PROGRAM 4 - 15387 - 15389

C1R-153716M
af1clR-153726M
C3MP R-153736
C4R-153746

us = OBJECT

C1MP R-153756M
1C2MP R-153766
C1MP R-153796M
C22MP R-153806M
1C 3MP R-153816

SCROLL

CllMP R-153826M
i3;iclMP R-153856M

15 SOUND

a}1c3lMP R-153841
Page 39
  • DESIGN RELATED PARTS

1 422-0443-01 «+++ PLAY INSTR SH TITLE FIGHT ENG

2 422-0442-01 +--+ SUB INSTR HWC ENG

3 HWC-1010 verre ASSY FRONT MAS D 4 HWC-101] 0 ssree ASSY FRONT MAS. UE 5 HWC-1010-B ++ STICKER A

6 HWC-1010-C s+ STICKER

7 HWC-1015 NTRY PLATE

8 423-0187 TLLBOARD PLATE HC

9 HWC-1104X ++ TLLBOARD

10 HWC-1104-B +++ WC BILLBOARD STICKER R.A

11 HWC-1104-C +++ HWC BILLBOARD STICKER R.B

12 HWC-1104-D +++ HWC BILLBOARD STICKER L.A

13 HWC-1104-B +++ HWC BILLBOARD STICKER L.B

14 HWC-1107X +++ AMP COVER BLUE

15 HWC-1108X -++++++-+ AMP COVER RED

16 HWC-2001X + CONTROL PANEL LEFT

17 HWC-2101X + CONTROL PANEL RIGHT

Page 40
  • PARTS LIST @ TOP ASSY TITLE FIGHT (D-1/4)

9 aid) POH

Page 41

(@) TOP ASSY TITLE FIGHT (0-2/4)

ITEM NO. | PART NO. DESCRIPTION NOTE

1HWC-0100ASSY CABIHWC&@
2WC-0500ASSY SHIELD CASEGP

834-9324-02 | CAME BD TITLE FIGHT OTHERS

;834-9324-01 | GAME BD TITLE FIGHTUSA-
4WC-0200 | ASSY BILLBOARD HWCiy
5WC-2000ASSY CONT PNL LEFCY
6WC-2100ASSY CONT PNL RIGHTCe
1WC-0003SHIELD CASE STOPPERSS
8 | SGN-4048POLYETHYLENE COVER 1250 1800x2100g
lL| 421-6594STICKER SERIAL NO INFO|
12| 421-6709STICKER SERVICE INSTR ENG
15| SGM-4111KEY BAG

16 | 421-7987 STICKER ELEC SPEC

17| 421-7988STICKER SERIAL NUMBERcm
18| 421-6671STICKER DANGER HIGH VOLTAGE[ez]

201 | 069-0087 FLT WSHR CROME M8 202 | 000-0416-FS | M SCR PH W/FS Md x16 203 | 051-0005 FLG NUT M5 204 | 029-0001 M SCR TH CRM Max 25 205 | 029-0328 M SCR TH CRM M5 x 25 206 | 029-0400 M SCR PH CRM M5 x 40 207 | 029-0444 TMP PRE SCR BH CRM M8 x20 208 | 039-0098 HEX BLT BLK W/S M8 x 35 209 | 069-0135 FLT WSHR CRM 5. 5-201. 6 210 — | 069-0058 PLT WSHR 8.5-22x 1.6

Page 42

@ TOP ASSY TITLE FIGHT (0-3/4) ITEM NO. | PART NOL DESCRIPTION NOTE 211 | 000-0308-FS | M SCR PH W/FS N3x8 212 | 029-0385 | M SCR TH BLK M4x30

402 | SCM-2675 ‘| POLYETHYLENE BAG 240x370 ‘wl 403 | 540-0006-01 | WRENCH FOR TAMP PRE SCR DUAL TYPE N4 ‘aan 404 | 540-0007-01 | WRENCH FOR TAMP PRP SCR DUAL TYPE MS Fe 405 | 540-0009-01 | WRENCH FOR TAMP PRF SCR DUAL TYPE N8 =

420-5962SPL MANUAL 26” 200-5187 ENGCC)
108Vy20-5963SPL MANUAL 26” 200-5195 ENG

407 | 420-6071-01 | OWNERS MANUAL TITLE FIGHT ENG és 409 | 514-5036-5000 FUSE 6.44 x30 5000mA 125V co

410| 509-5218USH BUTTON SW IT YELLOW W/LAMPg
411| 509-5466 (| SW MICRO TYPE (ANS0033C5)cy
412 | HWC-0001SUB LEG BRACKET4)
413| 601-5882G ADJUSTER 60db
414| 059-0085EX NUT (3 8B) NIG

415 | 039-0157 | HEX BLT CRM W/FS MBX35 416 | 029-0445 —'| W SCR RH W/F CRM 3.5X16

417| HWC-2215UBB@)

419 | HWC-0004 | STOPPER BRACKET & 420 | 069-0123 WSHR CRM 8. 5-22X1.6

421 | HNC-2014| CAP COVER REDo

422 | Hc-2015 ‘| CAP COVER BLUE Q 423 | 601-6604-70 | CARTON BOX 70 ‘SF 029-0444 | TMP PRF SCR BH CRM NB X20 421-6690~ | STICKER ~V

Page 43

‘O) TOP ASSY TITLE FIGHT (D-4/4)

ITEM NO. PART NO. DESCRIPTION NOTE

424 090-0074 STATICIDE (300mé)

Page 44

@) ASSY CABI HWC (HWC-0100)

ITEM NO. PART NO. DESCRIPTION NOTE

1HWC-1000ASSY CABI COMZp
2422-0443-01 | PLAY INSTR SH TITLE FIGHT ENG{\
4421-5800-198 | ORIGINAL SEAL TITLE FIGHTza}
6422-0442-01 | SUB INSTR HWC ENGco
Page 45

©) ASSY BILLBOARD HWC (HWC-0200)

AHA ij $ a

=

[rrew vo. | parr no. DESCRIPTION NOTE 1 | IWC-1100 | ASSY BILLBOARD COM AR 2 | 423-0187 BILLBOARD PLATE IWC 7)

201 | 029-0014 «| M SCR TH CRM N4x 12

Page 46

® ASSY SHIELD CASE (HWC-0500) (D-1/2)

Page 47

@ ASSY SHIELD CASE (HWC-0500) (D-2/2)

ITEM NO. | PART NO. DESCRIPTION NOTE

1| SCR-0501-01 | SHIELD CASEa

2 | SCR-0502-01 | UPPER COVER —/ 3 | SCR-0507-01 | SHIELD COVER

4| scr-0504‘| HOLDERgo
5| 839-0538SYSTEM MULTI FLT BD——
6 — | SCR-0508COVER(cn
101 | 280-5232GUIDE RAIa

201 | 010-0308 S-TITE SCR PH W/F N38 202 | 012-0308 TAP SCR PH 3x 8 203 | 000-0410-FS | M SCR PH W/FS M4 x 10

Page 48

® ASSY CABI COM (HWC-1000) (D-1/3)

am i) S =| 560 < WE

T SECTIONA-A,

Page 49

@) ASSY CABI COM (HWC-1000) (D-2/3)

ITEM NO. | PART NO. DESCRIPTION NOTE

1WC-1001ASSY SUBCABGg}
2WC-1010ASSY FRONT MASK REDi
3WC-1011ASSY FRONT MASK BLUE@
4WC-1013FRONT MASK HOLDERca)
5 | HWC-1014PLASTIC PLATE4
6WC-1015ENTRY PLATELo\
7WC-4000ASSY POWER SPPLYay
8WC-1018HOLDER LOWEaon
9WC-1019HOLDER UPPE!oa
0WC- 1020SW UNIT
12WC- 1026AC UNITa.
3WC-1028METER UNIaa
4 | 280-5112BUSH FOR TV&
5280-5113COLLAR FOR TY(Ss)
6280-5114SPACER 6. 4-252()
7 | 253-5366CASH BOXQP

8 | 220-5167~ | COIN ENTRY~ (a) 9 | 421-7020 STICKER CAUTION FORK 200-5187-15 | ASSY CLR DSPL 26 TYPE 15K 100V 21 i 200-5195-15 | ASSY CLR DSPL 26 TYPE 15K 100V 22 | 421-7907~ | DENOMI SH BLUE PLAYER ~ |

23~—'|HWC-1012SPEAKER COVERay)

24 | HWC-1017 STOPP|

25 | HWC-1036CUSHIONE>
101 | 280-5225CORD CLAMP 21ZF
Page 50

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 51

© ASSY SUBCABI (HWC-1001) (D-1/5)

Page 52

(©) ASSY SUBCABI (HWC-1001) (D-2/5) ITEM NO. | PART NO. DESCRIPTION nore |

1| HWc-1002WOODEN CABINETraw)
2 | MWC-1003BACK DOORa) |
3HWC-1004UPPERDOOa)
4 | HWC-1005FRONTDOOid)
5 | HWC-1006STOPPERCONT PNLerin
6 | HWC-1007COIN CHUTE UPPER)
7WC-1008X | HOLDERA
8 | HWC-1009MONITOR B2
10 | PSR-1004LEG BRACKEfe
1| ARC-1006LEG: BRACKET
217-5216PLATE LEG BRACKET

3 | 220-5166~ | ASSY COIN CHUTE SPCL 2D00R~

14 | 220-5380MAG LOCK MASTER W/O KEYe
5 | 220-5381KBY MASTER FOR 220-5380re)
6N-1050SPACER RINGS
7P-1167TNG LKG(a)

8 | DP-1148X LKG TNG

9 | 117-0062PLATE LOCK RETAINERgob
2017-5098TNG RETAINER PLATEa)
2105-5068PLATETONGUE STOPPER

22 | 220-5046-91 | MAGNETIC LOCK W/KEYS GSD

23N-1042XFAN BRKTa
2417-5151GUARDPLATE 140 160
25R-1608LOCK BRACKET

26 09-0045-91 | KEY HOLDER 27 | 421-7501-02 | STICKER 6. 3V 0. 15A

Page 53

® ASSY SUBCABI (HWC-1001) (D-3/5)

ITEM NO. | PART NO. DESCRIPTION NOTE

28105-5106CASH BOX COVERay)
29 | 105-5107CHUTEGp
30| MX-1009COIN CHUTE MIDDLE=a
31 | 117-0063PLATE TONGUE RETAINERa)
32 | HWC-1030DESIGN PIPEaD
33117-5234PLATE 6-40
34| HWC-1034ORNAMENT
35| HWC-1035NUT PLATE
36| HC-1037PLATE 6-120ep

01 | 601-6224 CASTER 75 02 | 260-0011-02 | AXIAL FLOW FAN ACLOOV 50-60Hz aa}

103 | 601-5882LEG ADJUSTER $60ay
04 | 130-5087SPEAKER W/SHLD 4 OHM 160a
05 = | 280-5225CORD CLAMP 21oF
06 ‘| 280-0419HARNESS LUGxe
07 ‘| 280-0425CORD CLAMP #10ig}

08 — |-310-5029-D20 | SUMITUBE F D20KM 0g | 601-0460 PLASTIC TIB BELT 100MM

201 | 000-0308-FS | M SCR PH W/FS 3x8 202 | 000-0345-FS | M SCR PH W/PS M345 203 | 000-0406-S | M SCR PH W/S M4x6 204 | 000-0408-FS | M SCR PH W/FS N4x8 205 | 000-0416-FS_ | M SCR PH W/FS M416 206 | 000-0430-FS | M SCR PH W/FS M430

Page 54

® ASSY SUBCABI (HWC-1001) (D-4/5)

ITEM NOPART NO.DESCRIPTIONNOTE
207029-0150M SCR TH BLK M425

208 010-0306-F | S-TITE SCR PH W/F M3x6

210030-0845HEX BLT M8 x 45
211039-0152HEX BLT BLK W/FS M630
212039-0150HEX BLT W/FSM6 Xx 25
213039-0087CRG BLT CRMM6 x 30
214039-0064CRG BLT CRMM6 x50
215005-3516-F | W SCR RH W/F3.516
216005-3113-F =| W SCR RH W/F3.113
218050-0006HEX NUT M6
219059-0065HEX NUT (3 #8) M16
220061-0006SPR WSHR M6
221061-0008SPR WSHR M8
222069-0135FLT WSHR CRM 5. 5-20 1.6
223069-0058FLT WSHR8. 5-22 1.6
224029-0382TMP PRF SCR TH CRM M535
225051-0005FLG NUT M5
226031-0530CRG BLT M5 x30
227029-0413M SCR TH CRM M5 x40
228005-3110W SCR RH 3.110
229006-3110W SCR FH 3.110
230046-0001SCR NAIL TH STAINLESS

301 600-6215-39 | WIRE HARN COIN SW LEFT 302 600-6215-40 | WIRE HARN COIN SW RIGHT 303 600-6215-43 | WIRE HARN SP LEFT

Page 55

© ASSY SUBCABI (HWC-1001) (D-5/5)

ITEM NO. PART NO. DESCRIPTION NOTE 304 600-6215-44 | WIRE HARN SP RIGHT |

—5i-

Page 56

@ ASSY FRONT MASK RED (HWC-1010)

Sb &

ITEM NO. | PART NO. DESCRIPTION NOTE

1HWC-1010-A | PRONT MASK REDG7
2HWC-1010-B | STICKER Aip)
3HWC-1010-C | STICKER Bc]
4HWC-1010-D | RUBBER CUSIIIONi)
Page 57

ASSY FRONT MASK BLUE (HWC-1011)

ae / wd w

ITEM NO. | PART NO. DESCRIPTION NOTE

1| HWC-1011-A | FRONT MASK BLUE@/
2HWC-1010-B | STICKER A>
3HWC-1010-C | STICKER B<j

4 | HWC-1010-D | RUBBER CUSHION —7

Page 58

@ SW UNIT (HWC-1020)

Page 59

@ SW UNIT (HWC-1020) (D-2/2)

ITEM NO. | PART NO. DESCRIPTION NOTE

1HWC-1021X | SW BRACKETae)
2 | 421-8295STICKER SW UNITao
ol220-5420RHEO STAT 100 OHM 10W&
102| 509-5028SW PB IMOx
04509-5374SW PB IM 10A 125V&
05509-0049SWITCH STOPPER 12¢ES
06601-6999KNOB 18 SERRATION@
07601-0460PLASTIC TIE BELT 100mmf
08280-5008CORD CLAMP $15eT

09 310-5029-D20 | SUMITUBE F D20MM

301 600-6215-35 | WIRE HARN TEST SW LEFT 302 600-6215-36 | WIRE HARN TEST SW RIGHT 303 600-6215-37 | WIRE HARN DEMAG SW

Page 60

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 61

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 62

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 63

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 64

(D ASSY BILLBOARD COM (HWC-1100) (D-1/2)

Page 65

(©) ASSY BILLBOARD COM CHWC-1100)

ITEM NO. PART NO. DESCRIPTION

1HWC-1101ASSY SUBCABI BILLBOARD
2HWC-1104XBILLBOARD
3HWC-1107XLAMP COVER BLUE
4HWC-1108XLAMP COVER RED
5HWC-1106SASH

6 421-750i-18 | STICKER FL 32W 7 421-7501-08 | STICKER 110V 15W

101390-5276-32-01) ASSY FL UNIT 32W EXEy,
102390-5257LAMP 110V 15W7
103214-0118LAMP SOCKE'=
104280-0419HARNESS LUGA
105209-0023CONN CLOSED ENDog
106601-0460PLASTIC TIE BELT 100mmLo
202029-0001M SCR TH CRM M4 x25
203029-0014M SCR TH CRM M4x 12

204 000-0425-FS | M SCR PH W/FS M4x 25

205005-3110W SCR RH3.110

301 600-6215-50 | WIRE HARN FL 302 600-6215-51 | WIRE HARN WINNER LAMP

—6i—

Page 66

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 67

BILLBOARD (HWC-1104X)

ITEM NO. PART NO. DESCRIPTION NOTE 1 HWC-1104X-A | BILLBOARD BLANK

2HWC-1104-B | HWC BILLBOARD STICKER R.Aoa
3HWC-1104-C | HWC BILLBOARD STICKER R.B|
4HWC-1104-D | HWC BILLBOARD STICKER L.Ame

a 5 HWC-1104-B | IWC BILLBOARD STICKER L.B

Page 68

\ / we

HWC-2200 | il \ CONTROLLED, HWC- 2003 (BLACK) ont INNER COVER OUTSIDE 0) | ) INSIDE

( () DESIGNATED

MC - 200F OUTER COVERY || I ( TRansparent ) (i) 34 7)

DETAIL DRAWING A

‘© ASSY CONT PNL LEFT (HWC-2000)

" N + 4}

> (@ 3B Ss cx!

Ss & ) 3)

8) 100kgf+cm (D-1/2)

Page 69

@ ASSY CONT PNL LEFT (HWC-2000) (D-2/2)

ITEM NO. | PART NO. ESCRIPTION NOTE

1| HWC-2001X | CONTROL PANEL LEFT525) 5
2HWC-2002HINGE 648Kczaee)
3| nWe-2230 | ASSY CONTROLLER BLUBs
4| HWC-2015CAP COVER BLUEP 4
101| 509-5218PUSH BUTTON SW IT YELOW W/LAMPDr
102 | 280-5008CORD CLAMP 15Lex
201039-0065CRG BLT CRM = M5x14
202039-0081CRG BLT CRM M620
203050-0005HEX NUT M5

204 | 054-0006 U NUT MB

205061-0005SPR WSHR M5
206090-0012SCREW LOCK

301 | 600-6215-45 | WIRE HARN EXT CNTR PNL 302 | 600-6215-47 | WIRE HARN START SW

Page 70

© RED

+ 4 | we, + + + a gs ° /, L

HWC-2200 Val CONTROLLER, HIVC-2003 (BLAck)

ur > OUTSIDE fet . He INSIDE

HWC-200¢ aa

OUTER COVER

DETAIL DRAWING A ( TRANSPARENT )

INNER COVER

DESIGNATED

FASTENER

Nee aN 202) 0) Ne

© ASSY CONT PNL RIGHT (HWC-2100)

(D-1/2)

Page 71

ASSY CONT PNL RIGHT (HWC-2100) (D-2/2)

ITEM NO. | PART NO. DESCRIPTION NOTE

1| HWC-2101X | CONTROL PANEL RIGHT5334,
2 | HWC-2002HINGE 648ES
3| HWC-2240ASSY CONTROLLER RED#&
4| HWC-2014CAP COVER REDOD
101| 509-5218PUSH BUTTON SW 17 YELLOW W/LANPDrr ts
102| 280-5008. ~—«| CORD CLAMP 15LP

201 | 039-0065 CRG BLT CRM M5 x 14 202 | 039-0081 CRG BLT CRM 6x20 203 | 050-0005 HEX NUT M5 204 | 054-0006 U NUT M6 205 | 061-0005 SPR WSHR MS 206 | 090-0012 SCREW LOCK

301 | 600-6215-45 | WIRE HARN EXT CNTR PNL 302 | 600-6215-47 | WIRE HARN START SW

Page 72

—sg— mY at \ ® UI sa ba (€/1-d) (0022-OMH) LINN YATIOULNOD O

Page 73

@ CONTROLLER UNIT (HWC-2200)

ITEM NO. | PART NO. DESCRIPTION

IWC-2201HOLDER Bi
2WC-2202SW BRK
3WC-2203STOPPERBRKT

4 | Hwc-2204 SHAFT

5WC-2205MAIN.STOPPER
6WWC-2206SUB STO
7WC-2207COLLAR
8WWC-2208PUSH SLEEVE
9Wwe-2209SPRING HOLDER
0 | HWC-2210SLIDESLEEVE
1WC-2211RUBBER HOLDER
2WC-2212CENTERING SLEBVE
3WC-2213BALL HOLDER UPPER
4WC-2214BALL HOLDER LOWER
5WC-2215RUBBERO ase

6 | we-2216 ‘| COMP SPRING ON

7| HWc-2217 | SLIDE PLATEOQ, 4
8WC-2218SPACERC)
lol | 509-5466SW MICRO TYPE (AN50033C5)crn
102 | 601-6997BALL 31.752)
103| 280-0425CORD CLAMP 10

104 | 601-0460 PLASTIC TIE BELT 100mm

201 | 000-0316 M SCR PH M3x16 202 | 029-0446 M SCR FIL MGX 20

Page 74

TBM NO. | PART NO. DESCRIPTION ore 1 | awe-2003 | InweR cove QF. 2 | HWC-2004 | oUTER cove! aen 3 | wve-2005 | aRiP Rep a, 4 | HWc-2006 | GRIP coveR RED 5 | HWc-2007 | GRIP cAP RED 6 | Hwc-2200 ‘| conTROLLeR UNIT

201 | 008-0412 | TMP PRP SCR TH Max 12 202 | 059-0032 | U NUT no 203 | 060-0010 ‘| FLT WSHR M10

Page 75

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 76

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 77

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 78
  • WIRE COLOR CODE TABLE

THE WIRE COLOR CODE is as follows:

PINK SKY BLUE BROWN PURPLE LIGHT GREEN mMoow>

Wires other than those of any of the above 5 single colors will be displayed by 2 alphanumeric characters.

RED BLUE YELLOW GREEN WHITE ORANGE BLACK GRAY WOIUOPWNE

If the right-hand side numeral of the code is O, then the wire will be of a single color shown by the left-hand side numeral (see the above).

Note 1: If the right-hand side alphnumeric is not 0, that particular wire has a spiral color code. The left-hand side character shows the base color and the right-hand side one, the spiral color.

<Example > Sloss WHITE / RED

RED WHITE

Note 1 : The character following the wire color code indicates the size of the wire.

K :AWG18, UL1015

L :AWG20, UL1007

None: AWG22, UL1007

Page 79

600~6215~01 600-6215- =02

| Hwc-4000 | ASSY : POWER SUPPLY | HWC-1 026 ; AC UNIT | 600-6215-06 BOO-G218=72 600-6215-07

miei $60-5229

600-6215-11

600-6215-31 (-26) 600-6215-30 (-26) 600-6215-29 (-26)

FAN AL.

MOTOR 600-6215-50 wmiteuey HWC-1100 BILLBOARD 400-5145 F.G. -SVj 30x86

0K. NK ETE

10K 600-6215-15

§00-G6215-14 600-6215-18 600-6215-17 600-6215-16

600-6215-16 BOIS

§00-6215-10 js00-6215-12 L

BLACK) [_pevas. sw. 600-6215-20 (-19)

600-6215-21 (-19)

GHT PLAYER 600-625-357, toon 10W 82 RIGHT. Fee Por Fs we = oo N t c iS S aE in Cerne & Es = . ELE COIN | uy

:for1 Se LeeT PLAYER 2
_‘B00-6215-44

'00-5187-15) EXPOR so — 00-5195~15) a ‘ OPTION] RIG fawc— 4 020 pope 0 ae 1 sw UNIT e+ -- ——--- o toon tow 32) LEFT PLAYER : $800-6215-36 RV. 509-5374 CN 4

AMP J 40P ASSY SHIELD CASE (D~2/2) 839-0538 SYSTEM MULTI FLT BD

Hwc-0500

CN 7 c a | Oy a ye 2]

43inet
188012=7mite) &00-6275-49) Z|
poscl®3iat

Oy

comm10]6215 CONTROLLER.
Hopop StSW ittmuitemer 00-6225+ hEET..
cle25Ipa

Ss DOWN 1 7 Z Sreet ‘Lu

4Ss|

= 0. z wile) SOO=62TS=89 77 am su SI 5 2 1 CONTROLLER, come | eee | OL TART SW: —2 8 Sie Bor je START LAMP + 4 START. Ol

a anny > ape) ©00-6215-43 4 ;O: io} CONTROLLER.

joaop3t—ColeSt etmurtetieP 00-621 5.|__—__.. SET _1 [|
zaof tt —_@cle,.=
Sales: RDOEsty £5S.6 DOAN. ey

aagleSR-LEFT [cs isc! o—obet |

1 saol4a—E alaoo.a

PUSH 7 eee woo-ezis—a3! ol CONTROLLER | tty! a Zi Ol

600-6215~21 a) Fi9) tao 600-6215-59 it ++ LEFT euaver .| O} Z| 600-6215-40 en ——_Ricut_ecaver| CO} COIN a METER tet ‘ot --—_ Lee eaver | S| coIN iz METER 10} iS) ++ - RiGHT_evaver! “I

  • WIRING DIAGRAM (D-1/2)
Page 80

HWC-0500

ASSY SHIELD CASE

834-93234-~ GAME BD TITLE FIGH

837-941 3-~ ROM BD TITLE FIGHT

SS

837-8676 MAIN BD (SYSTEM MULTI)

S6P EDGE CONN DIN 48P /-—1 56P EDGE CONN

CN 3 CN 4 839-0538 SYSTEM MULTI FLT BD

AMP J16P AMP J40P AMP JSOP AMP J16P AMP J40P CN 5 CN 6 CN 7

; HWC-0500 SYSTEM MULTI SHELD CASE j

CONTROLL PANEL HwC-2000, 2100

1 PLAYER PLAY START PLAYER VS. PLAYER START

JOY STICK

CNTR PANEL MARS COIN CHUTE (0-172) ce ELE COIN Tene sa Sa] aces 4 CHANNEL

for EXP.em,2 oc ovQUATTRO

Yelonu?] GD0-G215-65 |CN-10 with

(D-172)cMOLEX
RIGHT,sSuitchesconnectors

PLAYER HT W335 fo-7

COIN swspee(2 2) PL2 COIN Sw NO

YeLLowv) a1 (2 3

«sycP(2 4! PL1 coin sw NO

(0-172) BY 12_S] coin sw COMMONS

Leet—LEET Coin Sw 3a 1 31‘CN-2

PLAYER GND SO -TSox:

COIN SWWHITE) 600-6215-66» GSg
Leonesg ee5
Wve= 5g

‘eet «= 2% = COIN ENTRY. RB 2a oan i . if COIN ENTRY LAMP ¢90-6215-67 2

4 CHANNEL QUATTRO =i) wi sw auTNHN ata 12345678 1234 PLAYER START Lawes ff 600-6215-69 COIN METER -Ve COIN ENTRY LAMP fro] SWITCH ENABLE COIN ENTRY LaMP E PL4 COIN SW _NZC ff PL4 COIN SW N70 HL PL3 COIN SW NZC fF PL3 COIN SW N/O PLZ COIN SW NC PL2 COIN SW NO f PL COIN SW NZ octi2v PL COIN SW N7O oc ov COIN SW COMMONS iy (aut 4 ouTPuT) (D=1 72) 12) 1@ YELLOW) §=600-6215-70 +t -- to NARS OR SEAT Rew Peace AC UNIT for EXPORT WC—4.000) (geio~sz0v sa ASSY 600-6215-01 SO ORT EEE ing sw se 34 /600-6215-04 SPLY| e ! OL on 50 :

EARTH TERM 0

PWR TRANSFORMER WIRING

PWR XFMR PART No. 560-5229, 5230

‘m Fark

a. Ba VoTa,

=

  • WIRING DIAGRAM (D-2/2) |
Page 81

Model 25K7191 mbly D chematic and Ass

aw

cre os 2nas04

aN3904

ww

oH

VERT seme

HOR SYNE

. oo

Avert seme

= WOR SYN

iaovac| so/eons cea, navac

DEGAUSSING cote

vNOTE:

WHEN USING ALTERNATE IC4,STR3IZ3, REMOVE JUMPERS JR AND JBB. RE~ INSTALL THEM IN wueral YAAND JR RESPECT-

Copyright © 1962 Wells Gardner Eiearonics Corporation All rights reserved. ADJUST, 12100 a P4488 9-83!

CUTOFF DRIVE CUTOFF ORIVE CUTOFF ORI eT

A SEE NOTE 4

Aa SEE NOTE 5.

a0 OT 10,234 10.234 ie 2 5400 6 Et ae2 naw

Focus

1 scmcen

Ruz 12 gate, 2501398 ass e ae

cae

HORIZONTAL ‘ouTPUT

€69) 6100, 37,15 a3s Roe oor ae ae ae oe aw ons ase aor 22K aT se.

ALTERNATE T¢@ STasies Te: ros Lt_2 output sep ¢57

p a ae R

R102 2700

Less a. | 285.4 ¢ ( Some | tevet wa] i acs 6x 1/2

76, 1200 is9 co ® Taste | — see Note; ———————__, getecron REL.NO. | Moo NO | RIOT | REO [AIIT] ARNO | Rial | RIAD x [re2aria3-000]_25x7i93 | 12« | 3.1 | 680 lomit |omit |omrT fyasarisi-ooo] esxnsi | 12x | 3.9 | 680 |1ox|e20 | 15K |

Quseo mearrier movers SEE ALTERNATE CIRCUIT (MOUNTED ON TERMINAL cr? STRIP).

Sav To oul~ COLL.

ALTERNATE CIRCUIT QS CAUTION sarcry cmiticas couronenT,

We cnay notation n.47t0 couronent, cat agsanc2sx. AGIABG 29x

25.54v4/-2.08y at 248 BEAM CURRENT

mores ALLRESISTORS ARE IM OnMS,174W, 55 UN- CFSs OTHERWISE INDICATED

CAPACITANCE VALUES LESS Tram 1 ARE Im: MICHOFARADS. ABOVE | Th PICOFANAOS UM~ AMASE |MOICATED. CLECTROLYTICS

CIRCLED NUMBERS INOICATE LOCATIONS GF CERTAIN WAVEFORM READINGS

DOTTED NECK BOARD GROUND PATH (CONNECT- TON TO P202-4 AND P-5) MAY NOT BE PRESENT ON SOME VERSIONS.

ON SOME NECK UOARUS, R24 AND R26 ARE (ESENT_AND IN SERIES TO YIELD AN EFFECT Ive RESISTANCE OF Z2M,1W. ON OTHER BOARDS THERE 15 OMY ONE RESISTOR(Z2M,1W) WHCH MAY BE DEMOTED AS RZI4 AND R216.

REPLACE ONLY WITH SAME TYPE PARTS AS SHOWN IN PARTS LIST.

NOTES (CONT'D):

  • ALL RESISTORS REFERRED TO IN NOTE 5. ARE 10% ,CARBON COMPOSITION.