Major Havoc CO-252-07 1st Encoder Assembly Correction Supplement to CO-252-05 Encoder Doc
Major Havoc (rev 3) (Atari, 1983) · Supplement · 3 pages · 4 sections · original scan
CO-252-07 Ist printing
Supplement to
The Adventures of Pl lcd CS
Supplement CO-252-05 Encoder Wheel Documentation
The following changes affect the Encoder Wheel Assembly Parts List and illustrations contained in the above Supplement to TM-268.
1 Page 3. Add the following part to the Encoder Wheel Assembly Parts List:
- 042786-01 Encoder Wheel Sleeve
O Pages 2 and 5. Replace Figure 1-Encoder Wheel Assembly and Figure 2- Disassembling the Encoder Wheel with the illustrations included in this Supplement.
CO-252-07
038319-01 Knob
042786-01 Encoder Wheel Sleeve
038026-01
- Housing
038011-01 Plug
038010-01 Encoder Wheel
038022-01 Flange Bearing
038026-01 Housing © A035220-01 Coupler PCB Assy
178012-005 Retaining Clip 72-JB3606 Screw Figure 1 Encoder Wheel Assembly A038023-01 B
CO-252-07
Players may receive an electrical shockif the control panel s not properly grounded! After servicing any parts on the panel, make sure that Groove for Retaining Clip
the green ground wire is firmly attached to the metal tab on theinside
ofthe controi panel. Only then should
you lock up the game.
Encoder Wheel Sieeve
Bearing
Encoder Wheel
Tabs
Coupler PCB Washer
Retaining Clip =
Figure 2 Disassembling the Encoder Wheel