Dig Dug TM-203 2nd Printing
Dig Dug (rev 2) (Namco, 1982) · Technical Manual · 66 pages · 43 sections · original scan
m ” rewee apie a! oS _—— = == = © . Gpersnicn: Maintenance Sa Serica: Mahal “eee
| = | ConA with Illustrated Parts Lists | 5 == | |
| Pel | = vl ase aeverveeweee | 1 * . | |
| L | Pees So = . = eo : ee | =o | |
| 1 | BS ee ee ee | ard | |
| _ | Be | re | ee |
| 5 | as ee . . . . | * |
ree 4 . as on ss. 8 = sz. =. oe eae g : ‘ ae eS eee aE ee eg Se eae ec ae
GAME SERIAL NUMBER LOCATION :. Your game’s serial number is stamped on a label on the outside back of the game. The same number is also on the chassis of the video display, power supply, Regulator/Audio {1 PCB, and the Game PCB. Please mention this number when cailing your distributor for service.
GAME IDENTIFICATION, SERIAL NUMBER LABEL
VIDEO DISPLAY VIDEO DISPLAY
GAME PCB
REGULATOR! AUDIO Ii PCB
POWER SUPPLY
GAME IDENTIFICATION, SERIAL NUMBER LABEL
REGULATOR! AUDIO 1! PCB POWER SUPPLY
Operation, Maintenance and Service Manual
Complete with Illustrated Parts Lists
Engineered and Designed by NAMCO, LTD. Manufactured under license by ATARI, INC.
Dig Dug™
© 1982 by Atari, Inc. All rights reserved.
No part of this publication may be reproduced by any mechanicai, photographic, or electronic process, or in the form of a phonographic recording, nor may it be stored in a retrieva! system, transmitted, or otherwise copied for public or private use, without permission from the publisher.
The Dig Dug™ game play, all graphic designs, this technical manual, its accompanying schematic diagrams, and the display manual are protected by the new Copyright Act of 1976.
This Act provides for increased penalties for violating federal copyright laws. Courts can impound infringing articles while legal action is pending. If infringers are convicted, courts can order destruction of the intringing articles.
In addition, the Act provides for payment of statutory damages of up to $50,000 in certain cases. Infringers may also have to pay costs and attorneys' fees, fines up to $25,000, and face an imprisonment of up to one year.
Atari will aggressively enforce its copyrights against any infringers. We will use all legal means to immediately halt any manufacture, distribution or operation of a copy of video games made by us. Anyone who purchases such copies risks forfeiting such a game.
Published by: ATARI INC. 790 Sycamore Drive PO. Box 906 Milpitas, California 95035
Lithographed in the U.S.A. 4L
Dig Dug™
(NTERFERENC
to licensed communications services is not permitted by the FCC (Federal Communications Commission) If you suspect interference from an ATARI game at your location, check the following: @ All grounds (green wires) in the game are properly connected as shown in the game wiring diagram, and @ The game’s power cord is properly plugged into a grounded 3-wire outlet. If you are unable to solve the interference probiem, please contact:
ATARI Customer Service (800) 526-3849 or (800) 538-1611
Notice Regarding Non-ATARI Parts
Use of non-ATAR! parts or modifications of your ATARI game circuitry may adversely affect the safety of your game, and may cause injury to you and your players.
The warranty printed on the inside back cover of this manual may be voided, if you do any of the following:
® you substitute non-ATARI parts in your coin-operated game, or
® you modify or alter any circuits in your ATARI game by using kits or parts not supplied by Atari.
Not only may the use of any non-ATARI parts void your warranty, but any such alteration may also adversely affect the safety of your game and may cause injury to you and your players.
Dig Dug™
Table of Contents
Set-Up Procedures A. New Features... 0.0.0... 0c cc ee ete ete anne 1-3 B. Opening the Cocktail Cabinet ........ 0.2... e cece ee eee eee 1-4 C. Game Inspection ....... 26... cee cee eee etter eens 1-5 D. Game Installation. 0.0... . 2c cece tee tenes 1-5
- Installation Requirements ......... 6.02 eee ees 1-5
- Voltage Selection .. 0.0.2... cece eee eee eee tenets 1-5 E. Cocktail Table Legs ......... 00... eect eens 14 F. Switch Locations ........- 0... cee ee eee eee eee eens 1-7
- ONnJOFF SWItCH 00. ete cette eee 1-7
- Utility Panel Switches... 2.6.6... cee eee tee eee eee 1-7
- Option Switches ©... 2.66... ieee eee eee eee 18 G. Option Switch Settings .........-- 6c cee eee ete nee ee 1-9 H. Self-Test Procedure .......0 6. ccc cee cere 4-10 I. Game Play .. 0... cece eee eens 1-12
- Attract Mode 2.0.0... eee eee eens 1-12
- Ready-to-Play Mode ..........-- eee eee e eee eee eens 1-12
- Play Mode 0.0.0... cece een eee nents 1-12
- High Score Mode ......... 6c eee eee eee eee eee eens 1-13
- Hints forGame Play .......... 0000 cette eee eens 4-13
Troubleshooting A. Introduction ....... 060. c ce eee ete e eee eet 2-1 B. Comments on Troubleshooting. .........: eee eee eee eee eens 2-2 C. Self-Test Procedure .......-. 2 ccc cece tne eens 2-2
Maintenance, Repair and Parts A. Cabinet-Mounted Assemblies... ......- 60.6 e ce eee eee eee 3-2 B. TheControl Panel ......... 20.00 c cece eee eens 3-11 C. Fluorescent Tube and Speaker ... 6.2.2... cece eee eee eee 3-16 D. Video Display ......... 000. teeter eeeee 3-18 E. Coin Doors .... 0... cee eee tenet eee tenets 3-20 F. Printed-Circuit Boards .......... 2.0 ete eens 3-25 G. Power Supply Assembly ... 2.2... 66 eee cece ee ee teeter eee 3-32
Figure 1-1
Figure 1-2 Figure 1-3
Figure 1-4
Figure 2-1 Figure 2-2 Figure 2-3
Figure 3-1
Figure 3-2 Figure 3-3 Figure 3-4
Figure 3-5 Figure 3-6
Figure 3-7 Figure 3-8 Figure 3-9 Figure 3-10 Figure 3-11 Figure 3-12
Table 1-1 Table 1-2 Table 1-3 Dig Dug™
List of Illustrations
Game Overview, Upright Cabinet ............ 0.00000 cece eee ee 1-2 Game Overview, Cabaret Cabinet ..............00.0.. 000. cc eee 1-3 Game Overview, Cocktail Cabinet..................0.. Neca 4-4 Adjusting the Table Legs ......... 00... cece cece cece e eee eee 146 Game Switch Locations, Upright and Cabaret Cabinets ........... 1-7 Game Switch Locations, Cocktail Cabinet.............2...0.00, 18 Self-Test Procedure 2... 2... . cece ee ee eee eens 1-11
Self-Test Screen 1—Test Passes... ........ 0... eee ee eee ceeeeee 2-2 Self-Test Screen 1—Test Fails..........0.0 000... 000 cece uu euaee 23 Self-Test Screen 2 2.0.0... ccc cece cece ee eee tence eens 2:3
Maintenance, Repair and Parts: Cabinet-Mounted Assemblies, Upright Cabinet.................. 3-2 Cabinet-Mounted Assemblies, Cabaret Cabinet ................. 3-4 Cabinet-Mounted Assemblies, Cocktail Cabinet................. 3-6 The Control Panel 2.0... 0... cece cece eee e eens 3-11 Control Panel Assembly ..........00 00.0000. c cece cee even rae 3-12 Joystick Assembly... 0... cence eee erences 3-14
Fluorescent Tube and Speaker, Upright Cabinet ................. 3-16 Video Display, Upright and Cabaret Cabinets ................... 3-18 Video Display, Cocktail Cabinet ........ 0... ccc eee cece eee eee 3-19 Vertical-Mounted Coin Door, Upright and Cabaret Cabinets ........ 3-20 Double Coin Acceptor/Mount Assembly, Cocktail Cabinet......... 323 Printed-Circuit Board Removal ..............0.0 cece cece eee 3-25 Dig Dug™ Game PCB Assembly ........... 0.0000 cece e eee ee 3-26 Regulator/Audio II PCB Assembly ............... 0000 cee u eee 3-30 Power Supply Assembly ................ 000 cc esc cee eee enue 3-32
Game Price and Bonus Options ....................0000..00e 1-9 Game Difficulty, Price and Special Options ..................... 1-10 Dig Dug Scoring... 2.0.22... ccc eee ees 1-14
Dig Dug™
\f reading through this manual does not lead to solving a certain maintenance problem, call TELEHELP® at the Atari Customer Service office in your geographical area, as shown below.
WEST and CENTRAL U.S.A. Service only
Atari, Inc. California Customer Service Office 1105 N. Fair Oaks Avenue P. O. Box 427, Sunnyvale, CA 94086 Telex 17-1103 (Monday-Friday, 7:30-4:00 pm Pacific Time) From California, Aiaska, or Hawaii s (408) 745-2900 Service from anywhere in the area shown in white = toll-free (800) 538-1611
EAST U.S.A. Service only
Atari, Inc. New Jersey Customer Service Office 12A World's Fair Drive, Somerset, NJ 08873 Telex 37-9347 (Monday-Friday, 7:30-4:00 pm Eastern time) From New Jersey @ (201) 469.5993 From anywhere else in this area s toll-free (800) 526-3849
EUROPE Service only
Atari Ireland Limited European Customer Service Office Tipperary Town, Ireland Telex 28165 TIPPERARY TOWN, (Monday-Friday, 9:00-6:00 pm GMT) IRELAND
@® 062.52155
vi
Set-Up Procedures
How to Use This Manual
This manual, written for game operators and service technicians, describes the Dig Dug™ game.
The manual contains information about aff Dig Dug cabinets. Whenever information is unique to
the Upright cabinet, this symbol appears: i
Whenever information is unique to the Cabaret™ cabinet, this symbol appears:
Whenever information is unique to the Cocktail cabinet, this symbol appears: =
\ ae
eos '
=, Chapter One includes new features, game set-up, option switch settings, self-test procedures and game play.
Chapter Two details troubleshooting procedures.
Chapter Three contains maintenance, repair and parts information. In addition, schematic diagrams of the game circuitry are included with this manual. Figures 1-1 and 3-1 illustrate the game cabinet. Italicized lettering on these figures refers you to other places in the manual for information about specific cabinet parts.
Chapter
Set-Up Procedures Dig Dug™
FLUORESCENT TUBE AND SPEAKER See Figure 3-5
COLOR VIDEO DISPLAY See Figure 3-6
- JOYSTICK See Figure 3-4 ACCESS PANEL
CONTROL PANEL See Figure 3-2 & 3-3 GAME PCB See Figures 3-9 & 3-10
COIN DOOR See Figure 3-7
CASTER
POWER SUPPLY UTILITY PANEL See Figure 3-12 See Figure 1-3
Figure 1-1 Game Overview
Upright Cabinet
1-2
Dig Dug™ Set-Up Procedures
A. New Features
The Dig Dug™ game has two new features. Even if @ Game Sounds. There are 21 different game you’re familiar with ATARI® games, you should note sounds. In addition, a special option switch setthese important differences: ting lets you hear sounds used during game @ Joystick Control. This new four-position control play, but turns off attraction-mode sounds. is made of steel and molded plastic. It has few New features, as well‘as all other major parts in parts, which makes servicing easier. The leaf the game, are illustrated in Figure 1-1. Throughout switches snap in and out for easy replacement. this manual, wherever one of these new features is The rubber bellows is designed for a quick re- mentioned, you will see this symbol: turn to center.
COLOR ACCESS PANEL VIDEO DISPLAY See Figure 3-6
REGULATOR/ AUDIO I} PCB See Figures 3-9 & 3-14 JOYSTICK See Figure 3-4
CONTROL PANEL See Figures 3-2 & 3-3
COIN DOOR See Figure 3-7
UTILITY PANEL See Figure 1-3
GAME PCB See Figures 3-9 & 3-10
POWER ON/OFF SWITCH
POWER SUPPLY See Figure 3-12
Figure 1-1 Game Overview, continued
Cabaret™ Cabinet
Set-Up Procedures Dig Dug™
B. Opening the Cocktail Cabinet
@ The access panel near the bottom of the cabinet 1.
Opening the Table Top
To open the game cabinet, unlock and open the two key locks at one end of the game cabinet, located immediately below the table top (see Figure 1-1). 3. will then come out (See Figure 3-1).
Closing the Table Top
. : @ To close the cabinet, stand opposite the hinged ® Carefully lift the table top until the support arm f 7 p locks into place. Do not jam the table top at the end of the cabinet and grasp the table top with end of its upward swing. your git hand. @ With your left hand, press the button at the mid-
- Access Panel dle of the support arm and push the button out . toward the left. @ To open the access panel, lift out the steel security bar that secures the panel to the cabinet @ Gently lower the table top to the closed position. wall. @ Lock both key locks.
je TABLE TOP KEY LOCK j GAME PCB | ; 7 COLOR See Figures 3-9 & 3-10 VIDEO DISPLAY See Figure 3-6
Se REGULATOR/ GS, AUDIO Il PCB JOYSTICK | th See Figures 3-9 & 3-11 See Figure 3-4 St UTILITY PANEL P, See Figure 1-3 CONTROL PANEL See Figures 3-2 & 3-3 SPEAKER
POWER SUPPLY See Figure 3-12
START SWITCH
1-4 POWER ON/OFF SWITCH See Figure 1-3
Figure 1-1 ADJUSTABLE LEG See Figure 1-2
COIN ACCEPTORS See Figure 3-8
COIN COUNTER
Game Overview, continued Cocktail Cabinet
Dig Dug™
C. Game Inspection
Please inspect your game carefully to insure that it was delivered to you in good condition.
- Examine the exterior of the game cabinet for dents, chips, or broken parts.
- Remove the screws that were used as extra security to seal the rear access panel (Upright and Cabaret cabinets). Unlock and open this panel or the Cocktail table top, and the coin door; inspect the interior of the game as follows: @ Check that all plug-in connectors (on the game harness) are firmly seated. Replug any connectors found unplugged. Don’t force connectors together. The connectors are keyed so they only go on in the proper orientation. A reversed edge connector will damage a PCB and will void your warranty. @ Check that all plug-in integrated circuits on the PCBs are firmly seated in their sockets. @ Remove the tie-wrap that holds the coited power cord on the inside cabinet wall (Upright and Cabaret cabinets). Check the power cord for any cuts or dents in the insulation. Place the square black plastic strain-relief plate in the wood slot at the bottom of the rear panel opening.
@ Note the game’s serial number. On Upright and Cabaret cabinets, it is printed on a label on the back of the cabinet. On the Cocktai/ cabinet, the label is located on the start switch side of the cabinet. Verify that the same serial number is also on the Dig Dug game PCB, Regulator/Audio || PCB, power supply and video display. A drawing of the serial-numbered components is on the inside front cover of this manual. Please mention this number whenever you call your distributor for service. @ Check major subassemblies, such as the power supply, control panel and video display, for secure mounting. Set-Up Procedures
D. Game Installation
- Installation Requirements
Power 175 watts Temperature 0 to 38°C (32 to 100°F) Humidity Not over 95% relative Upright Cabinet 64 x 79 cm (25% x 31 in.) 174 cm (68% in.) Cabaret Cabinet 52 x 7834 cm (20%2 x 31 in.) 15334 cm (6072 in.) Cocktail Cabinet 624 x 82¥2 cm (24V2 x 32% Space Required Game Height
Space Required Game Height
Space Required in.) Game Height 65 x 101 cm (25% x 39% in.)
- Voltage Selection The power supply used in this game operates on the line voltage of almost any country in the world. The power supply may have three different voltage selection plugs: 100 VAC (violet wire color), 220 VAC (blue wire color), and 240 VAC (brown wire color).
Before plugging in your game, check your line voltage. Then check the wire color on the voltage selection plug that is plugged into your power supply. Make sure the voltage selection plug is correct for your location's line voltage (see Figure 3-12).
1-5
Set-Up Procedures Dig Dug™
‘ NOTE
E. Cocktail Table Legs To ensure cabinet strength, you must use
two screws when attaching each table This cocktail-table cabinet may be adjusted to leg. Using only one screw may result in four heights—65, 70, 76 or 101 cm (25%, 27%, 30 or damage to the cabinet wail when you 3934 inches). To adjust the table height, refer to move the cabinet across the floor.
Figure 1-2. LEO eel
« Remove or empty the coin box to prevent loose coins from sliding out of the box and into the game cabinet. ° Lay the table on end as shown. Place a support (the coin box, books or tool box) under the recessed side of the cabinet. » Remove the two Allen-head screws on each leg. Grasp the legs and slide them into the desired position. Then replace the Screws.
VE BOX REMOVE COIN BO) USE TWO SCREWS WHEN ATTACHING EACH TABLE LEG!
27% in.
SHIPPING POSITION (25% in.)
Figure 1-2 Adjusting the Table Legs
Dig Dug™
F. Switch Locations
- On/Off Switch The Upright and Cabaret cabinet on/off switch is located on the back of the cabinet, lower left side. The Cocktaii cabinet on/off switch is located on the bottom of the cabinet (see Figure 1-3). Set-Up Procedures
- Utility Panel Switches For Upright and Cabaret cabinets, the utility panel includes the volume control, self-test and coin switches, and coin counter. The coin switch is used to credit the game without tripping the coin counter. These switches are located inside the upper coin door (see Figure 1-3).
UTILITY PANEL:
COIN COUNTER
SELF-TEST
VOLUME CONTROL {To increase, turn clockwise)
POWER ON/OFF SWITCH OPTION SWITCHES: SWITCH AT 2C/D (Game price and bonus options) SWITCH AT 2C (Game difficulty, price and special options)
Figure 1-3 Game Switch Locations
Upright and Cabaret Cabinets
1-7
Set-Up Procedures Dig Dug™
OPTION SWITCHES: SWITCH AT 2C/D (Game price and bonus options) SWITCH AT 2C (Game difficulty, price and special options)
COIN
VOLUME CONTROL (To increase, tum clockwise)
SELF-TEST
oD
Q UTILITY PANEL:
POWER FEN) ON/OFF SWITCH aK (Reach under game to activate switch)
Figure 1-3 Game Switch Locations, continued Cocktail Cabinet
- Option Switches For the Cocktail cabinet, the utility panel includes Option switches, for all game cabinets, are locathe volume control, self-test and the coin switches. ted on the game PCB as follows: These switches are located under the table top. To © Game price and bonus options are at PCB localocate the coin counter, remove the coin box (see tion 2C/D Figure 3-1). ; @ Game difficulty, price and special options are at PCB location 2C.
Dig Dug™ Set-Up Procedures
G. Option Switch Settings
Tables 1-1 and 1-2 detail game options and their settings. Options are preset at the factory and shown by the $ symbols. However, you may change the settings to suit your individual needs.
Table 1-1 Game Price and Bonus Option Settings The 8-toggle switch at location 2C/D is accessible when the Dig A “coin” is defined as 25¢, 1DM or 1Fr. If you have a 2DM/1DM Dug™ game PCB is mounted in place. To change switch settings, or 2Fr/1Fr coin door with two coin counters, set switch 8 at PCB set the self-test switch to on. Verify the changes on the self-test jocation 2C to off. Then different denominations are counted on screen. Then turn the self-test switch to off. the two coin counters.
Settings of 8Toggie Switch on Dig Dug PCB (at 2C/D)
| 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | Option |
On On 1 Dig Dug life
| On | Off | 2 Dig Dug lives | |
| Ott | On | 3 Dig Dug lives | $ |
| Off | Oft | 5 Dig Dug lives |
Bonus lives awarded at the following point values: With 1, 2 or 3 Dig Dug lives With 5 Dig Dug lives
| On | On | On | No Bonus | No Bonus |
| Off | On | On | First at 10,000, | First at 20,000, |
second at 40,000, second at 60,000, and every 40,000 $ and every 60,000
| On | Off | On | First at 10,000, | First at 30,000, |
second at 50,000, second at 80,000, and every 50,000 and every 80,000
| Off | Off | On | First at 20,000, | First at 20,000, |
second at 60,000, second at 50,000 and every 60,000
| On | On | Off | First at 20,000, | First at 20,000, |
second at 70,000, second at 60,000 and every 70,000
| Off | On | Off | First at 10,000, | First at 30,000, |
second at 40,000 second at 70,000
| On | Off | Off | First at 20,000, | First at 20,000 |
second at 60,000
| Off | Off | Off | First at 10,000 | First at 30,000 |
Right coin mech—coin doors with 1 or 2 coin counters*
| On | On | On | 14 coin for 7 credits | |
| Off | On | On | 1 coin for 6 credits | |
| On | Off | On | 1 coin for 3 credits | |
| Off | Off | On | 1 coin for 2 credits | |
| On | On | Off | 1 coin for 1 credit | $ |
| Off | On | Off | 2 coins for 3 credits | |
| On | Off | Off | 2 coins for 1 credit | |
| Off | Off | Off | 3 coins for 1 credit |
$Manufacturer’s suggested settings *See Table 1-2 for left coin mechanism.
+9
Set-Up Procedures Dig Dug™
Table 1-2 Game Difficulty, Price and Special Options
The table below contains the switch settings for options relating to game difficulty, price and special options. The switches, on the game PCB at location 2C, are accessible when the PCB is mounted in place. A special option allows for continuation of game play. If a player is at a more advanced round when his game ends, he has 16 seconds to begin the next game at the same round. Another special option allows you to freeze the game action.
Settings of &-Toggle Switch on Dig Dug PCB (at 2C) 1 Option 8 7 6 § 4 3
On -
Off
On On On Off Off On Off Off On Off On Off
Off On
On On Off Off One coin counter $ Two coin counters*
A—Easy game difficulty B—Medium game difficulty $ C—Hard game difficulty D—Expert game difficulty Continuation of game play $ No continuation of game play Attract Mode sound $ No Attract Mode sound
Normal game action $ Freeze game action Left coin mech—coln doors with 2 coin counters On 1 coin for 1 credit $ Off 1 coin for 2 credits On 2 coins for 1 credit Off 2 coins for 3 credits
$Manufacturer’s recommended settings *Coin doors with different denominations and two coin counters.
H. Self-Test Procedure
This game will test itself and provide data to show that the game’s circuitry and controls are operating properly. The data is provided on the video display and speaker. No additional equipment is necessary.
We suggest you perform the self-test procedure when you first set up the game, any time you collect money from the game, when you change game options, or when you suspect game failure.
Refer to Figure 1-3 for the location of the self-test switch and option switches. To perform the self-test, set the self-test switch to on. After about eight seconds the self-test screen will be displayed.
To see game statistics, press the utility coin switch. To reset the high score table, simultaneously push and hold the pump and utility coin switches for 10 seconds. To end the self-test, set the self-test switch to off.
The complete self-test procedure is explained in Chapter 2, Selt-Test Procedure. If any part of the test described in Figure 1-4 fails, refer to Chapter 2.
1-10
Dig Dug™ Set-Up Procedures
Figure 1-4 Self-Test Procedure Instruction Test Passes
- Set the self-test switch to on (see Figure 1-3).
- Activate any control panel switch. Patterns appear on the screen. After about 8 seconds, the screen displays the picture below. The RAMs, ROMs and other chips are tested. If the picture is different from the picture below, refer to Chapter 2, Seff-Test:Procedure.
Game sounds are produced, from SOUND 00 through SOUND
- Activating any control panel switch produces a new sound. Test ali switches this way. If test fails, refer to Chapter 2, Seif. Test Procedure. Game sounds:
Ee SOUND 00 Credit issued
SOUND OT Start of game SOUND 02 indication of highest score SOUND 03 Game over SOUND 04 Monster attacking Dig Dug SOUND 05 Dig Dug dies SOUND 06 Monster escaping SOUND 07 Bonus Dig Dug awarded SOUND 08 End of wave SOUND 09 Monster speeding up SOUND 10 Monster crushed by rock SOUND 11 Monster bursting SOUND 12 Rock hitting ground SOUND 13 Rock falling SOUND 14 Dragon spitting fire SOUND 15 Dig Dug throwing harpoon SOUND 76 Dig Dug pumping up monster
SOUND 17 Dig Dug walking SOUND 18 Monster moving SOUND 19 Dig Dug capturing vegetable SOUND 20 Enter initials into high score table
ALL RAMS GOOD
ALL ROMS GOOD
TYPE OF CABINET
LEFT COIN MECH
RIGHT COIN MECH
NO. OF LIVES
DIFFICULTY
SOUNDS
GAME STATISTICS: THE COUNT STARTS AT 999(999) AND DECREASES. For example, if you play 10 games, the game subtracts 10 from 99.9 and the display shows 98.9 for the number of games played. (Disregard decimal points.) UPRIGHT
1 COIN 1 CREDIT
~1 COIN 1 CREDIT
>DIGDUG 3
~ RANK B
> SOUND 04
1ST BONUS FOR 10000 PTS 2ND BONUS FOR 40000 PTS ~«-— BONUS LEVELS AND FOR EVERY 40000 PTS
= FQ .I9IP .9999 .9999 .9999.
NO. OF GAMES NO. OF POINTS NO. OF SECONDS NO. OF BONUS PLAYED (times 10) PLAYED LIVES AWARDED
+11
Set-Up Procedures
I. Game Play
The Dig Dug™ game is a one- or two-player game with a color raster-scan video display. The screen shows a cutaway view of the land, most of which is below ground. The player controls the Dig Dug character who travels through and digs tunnels in the dirt. The object is for Dig Dug to destroy monsters by pumping them up or dropping rocks on them and to capture vegetables.
The third picture simulates game play. Dig Dug walks through underground tunnels. Monsters chase him and he periodically pumps them up or drops rocks on them. This picture ends when Dig Dug is destroyed.
- Attract Mode The attract mode begins when power is applied to the game, after a play or high-score mode, or after self-test. This mode is continuous and stops only when a credit is entered, or when in self-test. This mode may last for about one minute and fifteen seconds. In the attract mode, the screen displays one of four possible pictures,
In the first picture, Dig Dug enters the screen from the top right and walks across the surface. He digs a tunnel into the ground and begins to dig around the words DiG DUG. Meanwhile, monsters escort the word ATAA! across the top of the screen. When Dig Dug digs entirely around the words DIG DUG, these words, ATAR/ and the monsters fall down to anew position on the screen. Everything in the picture rolis up except the words DIG DUG.
In the second picture, game characters appear on the screen. Dig Dug is between FYGAR, the firebreathing dragon, and POOKA, the fat monster. First, Dig Dug pumps up POOKA until he explodes and disappears, and 200-500 (points) appears in his place. Then, Dig Dug pumps up FYGAR until he explodes and disappears, and 200-1000 appears in his place.
The third picture simulates game play. Dig Dug walks through underground tunnels. Monsters chase him and he periodically pumps them up or drops rocks on them. This picture ends when Dig Dug is destroyed.
The fourth picture shows the high-score table. The top five scores, round played and matching initials appear on the screen.
During the attract mode, the high score and score(s) for one or both players appear at the top of the screen. Credits or number of Dig Dug lives and
1-12 Dig Dug™
the round number appear at the bottom of the screen. This mode ends when coins are inserted and accepted for game play.
- Ready-to-Play Mode
During this mode, the high score and score(s) for one or both players appear at the top of the screen. The words PUSH START BUTTON, 1 PLAYER ONLY or 1 OR 2 PLAYERS and bonus life information appear in the center of the screen. ATARI copyright, credits and the round number appear near the bottom of the screen. This mode ends when a player pushes the start button.
- Play Mode
This mode begins when Dig Dug enters the screen from the top right and walks across the surface. He digs down to the center of the screen. The words PLAYER 1 READY or PLAYER 2 READY appear on the screen. Also, high score and score(s) for one or both players appears at the top of the screen. The number of Dig Dug lives and the round number appear at the bottom of the screen.
Game play takes place on a cutaway section of the land. The characters are Dig Dug and two monsters, one of which is a fire-breathing dragon. The underground area is divided into four different colored layers of dirt. Rocks are scattered in the dirt. The sky is at the top of the screen.
The player controls Dig Dug. He moves through horizontal and vertical tunnels. When Dig Dug digs new tunnels he moves slowly. When he is on the surface or in an existing tunnel, he moves faster. The object of the game is for Dig Dug to destroy all the monsters and go to the next round,
Dig Dug™
Monsters are trapped in caves. A monster may get out of a cave two ways. Dig Dug may dig him out. Then, the monster chases Dig Dug. The monster may also get out of the cave by turning into a ghost. As a ghost, he cannot be destroyed. The ghost does not travel in the tunnels. He travels through the dirt, and can travel diagonally. However, he reappears as the monster when he goes into a tunnel.
The monster moves faster than Dig Dug in vertical tunnels and slower on the surface. He destroys Dig Dug by catching him. In addition, the dragon destroys Dig Dug by breathing fire on him. The dragon only breathes fire horizontally. The fire can penetrate the dirt.
Dig Dug destroys the monsters by pumping them up until they burst, or by causing rocks to drop on them. To pump up and destroy a monster, the player presses and holds down the pump button. It is possible to stun a monster for a few seconds by pressing the pump button once or twice. While a monster is stunned, Dig Dug may pass over him without being destroyed. If two monsters are very close together, only one may be stunned. The other will catch and destroy Dig Dug.
Dig Dug must dig tunnels under the rocks to get them to drop. A rock may fall in a vertical or a horizontal tunnel. A rock also goes through a thin layer of dirt from one tunnel to the next. In a vertical tunnel, Dig Dug may stay directly under a rock and it will not drop. However, in a horizontal tunnel, Dig Dug must move out from under a rock right away, or he will be crushed.
After two rocks are dropped, a vegetable (worth extra points) appears in a tunnel in the center of the Set-Up Procedures
screen. A player has 10 seconds to capture (touch) the vegetable or it will disappear. There is only one vegetable per round.
The game progresses by rounds. Round 1 starts with four monsters and three rocks. The vegetable is a carrot. One flower on the surface (top right of the screen) represents Round 1. Two flowers represent Round 2, etc. As the rounds progress, the monsters move a little faster, and are better at avoiding failing rocks. In each round, the last monster tries to escape. If he is not caught by Dig Dug, he exits on the surtace (top left).
The game ends when all of the Dig Dug lives are used up. A player may continue to play at the same round (level) by following instructions on the screen, He has 16 seconds to insert a coin(s). Then he must push and hold the pump and start buttons at the same time.
- High Score Mode
This mode begins when a player has one of the five top scores. A player enters his initials in the center of the screen. The initials are then transferred to the table. To reset the high-score table, set the self-test switch to on. Simultaneously push and hold the pump and utility coin switches for 10 seconds. Then set the self-test switch to off.
- Hints for Game Play
@ Get many monsters to follow you. Then dig a long vertical tunnel up to a rock. Drop the rock by digging right or left. @ Dig Dug may take extra time to turn. It is better to start turning early than to wait until the last second. @ Destroy monsters at bottom dirt level for more points. @ Use PUMP to stun monsters. Then you may escape or walk through them. @ Don’t stop next to dragon when he is in a cave. His fire can go through a thin layer of dirt and destroy you. @ A vegetable appears after two rocks have been dropped. So be sure to drop two rocks in each round.
1-13
Set-Up Procedures Dig Dug™
Table 1-3 Dig Dug™ Scoring
Bursting Monsters
Dirt Layer POOKA FYGAR*
| 1 | 200 | 400 | |
| 2 | 300 | 600 | |
| 3 | 400 | 800 | “ |
| 4 | 500 | 1000 |
- Worth / amount vertically Dropping Rocks Monsters Destroyed Points 1 1000 2 2500 3 4000 4 6000 5 8000 6 10,000 7 12,000 8 15,000 Vegetables Points Round Vegetable for Capture
| 1 | Carrot | 400 |
| 2 | Rutabaga | 600 |
| 3 | Mushroom | 800 |
| 4 | Cucumber | 1000 |
| 5 | Cucumber | 1000 |
| 6 | Eggplant | 2000 |
| 7 | Eggplant | 2000 |
| 8 | Bell Pepper | 3000 |
| 9 | Bell Pepper | 3000 |
| 10 | Tomato | 4000 |
| W | Tomato | 4000 |
| 12 | Onion | 5000 |
| 13 | Onion | 5000 |
| 14 | Watermelon | 6000 |
| 16 | Watermelon | 6000 |
| 16 | Galaxian | 7000 |
| 7 | Galaxian | 7000 |
18 and above Pineapple 8000 Digging a new tunnel is worth 10 points per % inch (1.61 cm).
Troubleshooting
A. Introduction
This game tests itself when the self-test switch is set to the on position. If there is a failure, the game produces audiovisual aids to help you isolate the failing portion of the game. The self-test procedure included in Chapter 1 is to help you decide if the game is or isn’t working properly. The expanded procedures in this chapter are included to help the qualified electronic technician determine why the game isn’t working properly.
If you are not a qualified technician, do not try to work on the game circuitry or video display. True, it is not earning money when it doesn’t work. However, your investment in this game may greatly increase if either the video display and/or game PCB are destroyed while you are working inside the game cabinet. Be assured, it isn’t worth it.
B. Comments on Troubleshooting
When troubleshooting, first determine the symptom(s) of the failure, After determining the symptom, look over the wiring diagram and determine what assemblies could cause the failure. Could it be caused by the power supply, Regulator/Audio ti PCB, or the video display?
The next step is to check al! harness wires and connectors to the suspected failing assembly. If you find no harness or connector problem, substitute an assembly known to be good for the suspected failing assembly. If the game functions properly, you have successfully isolated the failure. If it doesn't, repeat the procedure with another assembly.
When you have isolated the failing assembly, you must troubleshoot that assembly and make the necessary repairs. If the display is failing, we suggest that a qualified video display technician handle the troubleshooting and repair. If the power supply or Regulator/Audio |! PCB is failing, troubleshooting and repair is relatively simple, as these assemblies are not too complicated. If the game PCB is failing, troubleshooting and repair will greatly depend on your understanding of the operation of this PCB.
To effectively troubleshoot problems of the game PGB, it is necessary for you, the technician, to become familiar with the PCB’s hardware. The diagrams in the schematic package (included with the game) show the functions of the circuitry. Again, while troubleshooting this PCB, first determine the symptom of the failure, then locate the suspected area on the schematic diagram.
2-2 Dig Dug™
C. Self-Test Procedure
To enter Self-Test, set the self-test switch to the on position. Patterns appear on the screen. After about 8 seconds, the self-test screen is displayed (see Figure 2-1). See Chapter 1, Section H, Self-Test Procedure for a complete description of this part of the self-test.
RAM OK ROM OK
UPRIGHT 1 COIN 1 CREDIT 1 COIN it CREDIT
DIGDUG 3 RANK B SOUND 04 1ST BONUS FOR 10000 PTS 2ND BONUS FOR 40000 PTS AND FOR EVERY 40000 PTS
Figure 2-1 Self-Test Screen 1 Test Passes
Dig Dug™
Figure 2-2 Self-Test Screen 1 Test Fails
SCREEN 1:
RAM FAILURE is indicated by the word RAM and a pair of alphanumeric characters displayed at the top of the screen. The following table lists the bad RAM chip and its location. Bad RAM chip location Screen Display on game PCB RAM OL 9M RAM OH 9M RAM 1L 9M RAM 1H 9M RAM 2L gE RAM 2H QUIK RAM 30 HIS RAM 3H 9H RAM 4L SFIG RAM 4H 9G/H
ROM FAILURE is indicated by the word ROM and a number displayed at the top of the screen. The following table tists the bad ROM chip and its location.
Bad ROM chip location Screen Display on game PCB ROM 1 6L ROM 2 6M ROM 3 6N/P ROM 4 6R ROM 5 6c ROM 6 6D ROM 7 5L Troubleshooting
To go to screen 2, set the self-test switch to off and immediately to on again.
SCREEN 2:
A white crosshatch pattern appears on the screen (see Figure 2-3). Use this pattern for convergence (see the raster-scan video display manual).
Figure 2-3 Self-Test Screen 2
Maintenance, Repair and Parts
In addition to maintenance and repair information, this chapter provides the necessary information for you to order parts for your Dig Dug game. Please note that common hardware has been deleted from most of the parts lists. This includes screws, nuts, washers, bolts, etc.
The parts lists are arranged in alphanumeric order. For example, all “A-” prefix numbers come first. Following this are numbers in sequence evaluated up to the hyphen, namely 00- thru 99-, then 000598-thru approximately 190000-.
When ordering parts, please give the part number, part name, applicable figure number of this manual, and serial number of your game. This will help to avoid confusion and mistakes in your order. We hope the results will be less downtime and more profit from your game.
Atari Customer Service numbers are listed in the front of this manual for your convenience.
Chapter
Maintenance, Repair and Parts Dig Dug™
A. Cabinet-Mounted Assemblies
Schematics, Self-Test Label & Manuals— see parts fist on following page Fluor. Tube & Speaker Assy.— 036498-01 : see Figure 3-5 (Upper Ret.) x 038273-01 038274-01 tern (Attract. Glass/Graphics) (Shield) re ' (T-Molding)
Video Display— see Figure 36 74-2110 (Lock) 003053-01 (Lower Ret.)
036495-01 78-6900402 (Grille) (Tape)
Control Panel Assy.— see Figures 3-2, 3-3 & 3-4 ! A002465-01 (Coin Counter) A038004-01 (Util, Sw. Harn.)
69-001 (Self-Test Sw.) 037419-02 (Access Panel)
034536-03 (Vibra. Damper) 62-041 (Coin Sw.) (Latch) A038295-01 (Main Harn. Assy.) Game PCB Assy.— see Figures 3-9 & 3-10
034536-02 Coin Door Assy.— (Vibra. Damper)
see Figure 3-7 (Power Harn. Assy.)
038003-01 (Util. Pri.) 178048-001 (Caster)
A037491-01 (Coin Box) 009992-01 (On/Off Sw. Cvr.)
A038256-01 2 (Cabinet Assy.) eee A037470-01 (On/Off Sw.)
RegJAudio Il PCB Assy.— see Figures 3-9 & 3-11
- A037453-03, (Leg) A037454-03 & A037455-03 (Power Cord) Figure 3-1 Cabinet-Mounted Assemblies Upright Cabinet
32 AnsB27E01 Cc
Dig Dug™ Maintenance, Repair and Parts
Figure 3-1 Cabinet-Mounted Assemblies, continued Upright Cabinet Parts List
Part No. Description A002465-01 6V Coin Counter
| A037453-03 | Strain-Relief Power Cord | (U.S.) |
| 4037454-03 | Strain-Relief Power Cord | (Austria, Belgium, Chile, Denmark, Finland, France, Germany, Greece, |
Indonesia, Italy, Netherlands, Norway, Spain, Sweden, and Uruguay)
| A037455-03 | Strain-Relief Power Cord | (Australia and New Zealand) |
A037470-01 Power On/Off Switch and Mounting Plate Assembly A037491-01 Coin Box A038004-01 Utility‘Switch Panel Harness Assembly
| A038256-01 | Cabinet Assembly | (inciudes legs and PCB retainers, but not the rear access panel) |
A038295-01 Main Harness Assembly A038297-01 Power Harness Assembly The following four items are the technical information supplements to this game: SP-203 Dig Dug™ Schematic Package ST-203-01 Dig Dug Label with Self-Test Procedure and Option Switch Settings TM-160 Service Manual for 19-Inch Electrohome Color Raster-Scan Display (Substitute TM-201 when using part no. 92-055, Wells-Gardner 19-Inch Display) TM-203 Dig Dug Operation, Maintenance and Service Manual
19-9032 Volume Control 62-041 SPDT Momentary-Contact Pushbutton Utility Coin Switch with Black Cap 69-001 OPOT Self-Test Switch 71-2110 Panel Cartridge Lock Mechanism (for rear access panel) 78-3201 Cabinet-Leveling Leg 78-6900402 Vinyl] Foam Single-Coated Adhesive Tape, %4-Inch Wide x Inch Thick (72 in. required) 003053-01 Lower Attraction Glass Retainer 009992-01 On/Off Switch Cover
| 034536-02 | Foam Vibration Damper | (For Regulator/Audio I! PCB) |
| 034536-03 | Foam Vibration Damper | (For Dig Dug Game PCB) |
036495-01 Speaker Grille 036498-01 Upper Attraction Glass Retainer 036686-01 Card of Game Pricing Labels (not shown in illustration)
| 037419-02 | Rear Access Panel | (does not include lock) |
| 037332-01 | Ventilation Grille | (located on cabinet top) |
038003-01 Utility Switch Panel for Volume Control, Self-Test Switch, Coin Switch and Coin Counter 038273-01 Attraction Glass with Graphics 038274-01 Video Display Shield with Graphics 178013-001 Spring Draw Latch 178034024 %-Inch Black Plastic T-Molding 178048-001 2-Inch Rigid Caster
Maintenance, Repair and Parts Dig Dug™
Schematics, Self-Test Label & Manuals— see parts list on following page
. A038321-01 037515-01 Video Display— (Cabinet Assy.) {Retainer} see Figure 3-6
{037511-02 71-2110 178034-024 / (tMolding) (Access Panel) (Lock),
Joystick Assy.— 4 see Figure 3-4
Control Panel Assy.— see Figures 3-2, 3-3 & 3-4 RegJAudio {1 PCB Assy.— 78-6900402 see Figures 3-9 & 3-11 (Tape)
178013-001 {Latch) 037259-01 038326-01 (Display Brkt.) (Attract. Pni.}
036891-01 (Grille) 148001-001 (Speaker)
Coin Door Assy.— see Figure 3-7
037495-01 (Util. Pri. Bracket)
A002465-01 (Coin Counter)
19-9032 (Vol. Ctrl.) 69-001 (Self-Test Sw.) 62-041 (Coin Sw.) 034536-03 (Vibra. Damper)
Game PCB Assy.— see Figures 3-9 & 3-10
A037491-01 (Cain Box) A038392-01 (Main Harn. Assy.)
A038393-01 (Power Harn. Assy.) Power Supply Assy.— A037470-01 see Figure 3-12 (On/Off Sw. Assy.) 009992-01 (On/Off Sw. Cyr.) A037453-03, ‘A037454-03, 03745503 or 8 9201 (Power Cord) (Leg)
Figure 3-1 Cabinet-Mounted Assemblies, continued Cabaret Cabinet
34 A038320-xx A
Dig Dug™ Maintenance, Repair and Parts
Figure 3-1 Cabinet-Mounted Assemblies, continued Cabaret Cabinet Parts List
Part No. Description A002465-01 Coin Counter
| A037453-03 | Strain-Relief Power Cord | (U.S) |
| A037454-03 | Strain-Relief Power Cord | (Austria, Belgium, Chile, Denmark, Finland, France, Germany, Greece, |
indonesia, Italy, Netherlands, Norway, Spain, Sweden, and Uruguay)
| A037455-03 | Strain-Relief Power Cord | (Australia and New Zealand) |
A037470-01 Power On/Off Switch and Mounting Plate Assembly A037491-01 Coin Box
| A038321-01 | Cabinet Assembly | (includes PCB retainers and legs, but not rear access panel) |
A038392-01 Main Harness Assembly A038393-01 Power Harness Assembly The following four items are the technical information supplements to this game: SP-203 Dig Dug™ Schematic Package $T-203-01 Dig Dug Label with Self-Test Procedure and Option Switch Settings TM-160 Instruction and Service Manual for 19-inch Electrohome Color Display (Substitute TM-201 when using Weils-Gardner Display no. 92-055) TM-203 Dig Dug Operation, Maintenance and Service Manual
19-9032 Volume Control 69-001 DPDT Self-Test Switch 71-2110 Panel Cartridge Lock Mechanism (for rear access panel) 78-3201 Cabinet-Leveling Leg 78-6900402 Vinyl Foam Single-Coated Adhesive Tape, ¥%4-Inch wide x %-Inch thick 009992-01 On/Off Switch Cover
| 034536-03 | Foam Vibration Damper | (for both PCBs) |
036686-01 Card of Game Pricing Labels 036891-01 Speaker Grille 037495-01 Bracket for Volume Control, Self-Test Switch and Coin Counter(s)
| 037511-02 | Rear Access Panel | (does not include fock) |
037515-01 Upper Display-Shield Retainer 037529-01 Display Bracket 038326-01 Attraction Panel with Graphics
| 038331-01 | Side Panel Decal | (not shown in illustration) |
148001-001 6x 9-Inch 4-Ohm 15W Oval High-Fidelity Speaker 178013-001 Spring Draw Latch 178034-024 Black Plastic T-Molding, %-Inch wide
Maintenance, Repair and Parts Dig Dug™
82-406 78-6900401 (Eyebolt) {Tape} 035852-01 (Bracket) R CF 038365-02 ‘ Bs a) (Table Top)
037681-01 (Bezel) | 035851-01 (Hinge)
034536-03 (Vibra. Damper) 03677401 (Grille)
037686-01 178015-001 (Grille)
(Support) 74-3003A = Video Display— (Spacer) : b see Figure 3-6
A037756-02 (Display Assy. 037791-01 y Assy.) (Security Bar) 037833-01 (Bar Bracket)
037827-01 (Backplate)
i
71-2110 a (Lock) 038354-01 71-3201 (Access Pn.) (Washer)
78-3206 Le -_ A037292-01 (Leg Supp. Assy.)
178034-024 A037246-01 (T-Moiding) (Leg Assy.} 036773-01 78-3205 178034-025 i i 037335-01 {Grille} (Endcap) (T-Molding) (Brace)
Figure 3-1 Cabinet-Mounted Assemblies, continued Cocktail Cabinet
AOBE372-xx A
Dig Dug™ Maintenance, Repair and Parts
Schematics, Self-Test Label & Manuals— 866 parts list on following page
af
178034-026 (T-Molding) |
035867-02 (Overlay) Game PCB Assy.— 03676401 see Figures 3-9 & 3-10 (Cam) 038366-01 (Glass Top) A038378-01 (Harness) 038090-01 (L-Clamp) 037792-01 (Mtg. Bracket) RegJAudio Il PCB Assy.— Joystick Assy.— see Figures 3-9 & 3-11 see Figure 3-4
Control Panel Assy.— 69-001 see Figures 3-2, 3-3 (Self-Test Sw.)
19-9032 037768-01 (Grille) (Vol. Ctrl.)
A038380-01 037865-01 62.039 (Power Harn.) (Util. Bracket) (Start Sw.)
62-041 Power Supply Assy.— , see Figure 3-12 (Coin Sw.)
7-9910NO (Nut)
A037884-02, A037886-01, A037887-01 or A037888-01 48-004 (Power Cord) (Speaker)
000869-01 4037470-01 {Spkr. Grille) (On/Off Sw. & Mtg. Assy.) 009992-01 (OnfOtt Sw. Cvr) 7 bene tel sot Coin Door Assy — (Start Sw. Bracket) A036775-01 seengue 036895-01 (Coin Box) (Sw. Bezel) 037753-01 A002465-01 (Ret. Bracket) (Coin Ctr.)
Figure 3-1 Cabinet-Mounted Assemblies, continued Cocktail Cabinet
Maintenance, Repair and Parts Dig Dug™
Figure 3-1 Cabinet-Mounted Assemblies, continued Cocktail Cabinet Parts List
Part No. Description A002465-01 Coin Counter A005133-01 Cooling Fan (optional equipment) A036775-01 Coin Box Assembly (includes lock) . A037246-01 Leg Assembly {includes leg, 2 adjustable feet and 2 endcaps) A037292-01 Leg Support Assembly (includes 2 panel nuts and endcap) A037470-01 On/Off Switch and Mounting Plate Assembly A037756-02 14-Inch Color Video Display Assembly A037884-02 Strain-Relief Power Cord (United Kingdom, Ireland, Lebanon, Saudi Arabia, india, Hong Kong, Singapore, Egypt, Nigeria, Republic of South Africa, Zimbabwe)
A037886-01 Strain-Relief Power Cord (U.S.) A037887-01 Strain-Relief Power Cord (Austria, Belgium, Chile, Denmark, Finland, France, Germany, Greece, indonesia, Italy, Netherlands, Norway, Spain, Sweden, and Uruguay) A037888-01 Strain-Relief Power Cord (Australia and New Zealand) A038370-01 Cabinet Base Assembly (incfudes grilles, PCB retainers, leg backplate and hinges) A038378-01 Main Harness Assembly A038380-01 Power Harness Assembly The following four items are the technical information supplements to this game: SP-203 Dig Dug™ Schematic Package ST-203-02 Dig Dug/Cocktai! Label with Self-Test Procedure and Option Switch Settings TM-187 Service Manual for 14-Inch Electrohome Color Raster-Scan Monitor TM-203 Dig Dug Operation, Maintenance and Service Manual
19-9032 50-Ohm, 12%2W Wire-Wound Rheostat (for volume control) 48-004 8-Ohm, 5W 5-Inch Round High-Fidelity Speaker 62-039 Momentary-Contact SPDT Light-Emitting-Diode Switch with Red Cap 62-041 SPDT Momentary-Contact Pushbutton Utility Coin Switch with Black Cap 69-001 DPDT Self-Test Switch 71-2110 Panel Cartridge Lock Mechanism (for table top) 71-3201 Anchor Washer for Table Top Locks 74-3003A #10 x %,-Inch-Long Aluminum Tubular Spacer (for table top support) 75-9910N0 #%-11 Steel Stamped Nut (for utility coin switch) 78-3205 Square Black Endcap for Leg Assembly 78-3206 Cabinet-Leveling Leg 78-6900401 Vinyi Foam Single-Coated Adhesive Tape, %-Inch wide x ¥,;Inch thick 82-406 #%-20 x 2-Inch-Long Eyebolt, with %-Inch Threads 000869-01 Speaker Grille 009992-01 On/Off Switch Cover 034536-03 Foam Vibration Damper 03585 1-01 Table Top Hinge 035852-01 Corner Bracket for Table Top 035867-02 Smoke-Color Acrylic Display Overlay 036764-01 Hook-Type Cam for Lock 036773-01 Cabinet Base Grille 036774-01 Upper End-Panel Grille 036895-01 Black Molded Switch Bezel 037335-01 Leg Brace 037681-01 Cardboard Display Bezel 037686-01 Slip-In Cabinet Grille (above contro! panel) 037753-01 Coin Acceptor Retaining Bracket 037768-01 Fan Grille (fan is optional—see part no. A005133-01) {Continued on next page]
Dig Dug™ Maintenance, Repair and Parts
Figure 3-1 Cabinet-Mounted Assemblies, continued Parts List
Part No. Description 037791-01 Security Bar 037792-01 Display Mounting Bracket 037827-01 Backplate for Attaching Leg ‘ 037833-01 Security Bar Bracket 037865-01 Bracket for Volume Control, Self-Test and Utility Coin Switches 038090-01 Video Display L-Ciamp 038354-01 Service Panel 038365-02 Wood Table Top 038366-01 Tempered-Glass Table Top with Graphics 038385-01 Start Switch Mounting Bracket 178015-001 Hinged Table Top Support 178034-024 ¥a-Inch Black Plastic T-Molding (for center cabinet base} 178034-025 7,-Inch Black Plastic T-Molding (for cabinet ends) 178034-026 %.-Inch Black Pastic T-Molding (for table top)
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
Dig Dug™
B. The Control Panel
Prior to removing or repairing any switch on the control panei, unplug the game.
To Open the Control Panel Upright and Cabaret Cabinets:
- Open the coin door. Reach up through the opening and release the spring-draw latches. They are on the cabinet side walls at each end of the control panel.
- Lift up on the control panel at the top edge, and tilt it toward you. The display shield has foam tape applied to it to cushion the shield and prevent liquids from entering the cabinet interior. Make sure this tape is in good condition.
Cocktait Cabinet:
- Remove the two sets of button-head screws and lock washers at the top edge of the control panel. Then, tilt the control panel toward you.
Leaf Switch Repair: @ Adjust the leaf switches for a narrow gap. When a switch button is depressed, the resulting wiping action of the cross-bar contacts provides a self-cleaning feature, Don’t bumish the contacts. To clean them, use electrical contact cleaner. Maintenance, Repair and Parts
@ To replace a leaf switch, remove the screw with a Philjips-head screwdriver. @ To replace the switch button, turn the stamped nut with a wrench in a counterclockwise direction, as seen from the inside of the control panel. The ring on the outside of the control panel should not spin, due to its design. @ Reinstall the switch. Reconnect the harness wires as shown in the Schematic Package, Game Wiring Diagram. Make certain the right colors go to the right tabs on the switch. °
LED Start-Switch Replacement: The LED switches have a very low failure rate. if aswitch should ever be suspect, first test it using the directions that follow.
To Test LED Switch:
@ Remove the wires from the suspected switch. @ Attach the feads of an ohmmeter to normally open and common contacts. @ Check contacts (push and release the switch button) for closed and open continuity. @ If the contacts do not operate sharply or always remain closed or open, then replace the LED switch.
To Replace LED Switch: @ Remove all wires from the faulty switch. @ Turn the switch counterclockwise while holding the black cone-shaped bushing on the outside of the control panel. @ Install a new switch using the reverse procedure. @ Reconnect the harness wires as shown.
Figure 3-2 The Control Panel
Maintenance, Repair and Parts Dig Dug™
A038280-01 \ WARNING ! (Cont. Pni./Decal) Players may receive an electric shock if this 038267-01 (Cont. Pri) i control panel is not properly grounded! After 038268-04 s71016-001 servicing any parts on the panel, check that the (Decal) y ground wire is firmly attached to the metal tab i a Assery) on the inside of the control panel. Only then ee. Pigui should you lock up the game. x A038322-01 78-6900402 (Ctrl. Pni./Decal)
03832401 (Ctrl. Pr) A 038325-01 (Decal) (Tape) 62.039 (Start Sw.)
~ 036895-01 (Bezel)
178030-003 A038369-01 (Pushbutton) 75-9910NO (Nut) (Cont. Pni./Decal) 038376-01 (Cont. Pn.)
(| A038299-01 160013-001 038367-04 (Harness) (Leaf Sw/Btn. Hidr.) (Decal)
A038382-01 =) {Harness)
LED CONTACTS— [yi] START 14 LED CONTACTS— i START 1 = WHITE/RED NC) NORMALLY OPEN WHITE/BROWN (-) (N.0) CONTACT
| BLACK COMMON CONTACT WHITE NORMALLY OPEN BROWN(-) (N.O.) CONTACT veo it BLACK Ls COMMON CONTACT RED(+)
START 2 START 2 WHITE/YELLOW = NORMALLY OPEN WHITE/ORANGE oT NO} CONTACT RED(+) ai Ls COMMON CONTACT RED(+) BLACK COMMON CONTACT __TeEh YELLOW i NORMALLY OPEN ORANGE(-) (N.0.) CONTACT
Figure 3-3 Control Panel Assembly
A038270-01 A A038323-01 A AQ38368-01 A
Dig Dug™ Maintenance, Repair and Parts
Figure 3-3 Control Panel Assembly, continued Parts List
Part No. Description
Upright Cabinet A038269-01 Control Panel with Decal ‘ A038270-01 Control Panel Assembly A038299-01 Control Panel Harness Assembly 038267-01 Control Panel 038268-04 Control Panel Decal Cabaret Cabinet A038299-01 Control Panel Harness Assembly A038322-01 Control Panel with Decal A038323-01 Control Panel Assembly 78-6900402 Vinyl Foam Single-Coated Adhesive Tape, “%4-Inch wide x \%-Inch thick (24 in. required) 038324-01 Control Panel 038325-01 Control Panel Decal Cocktail Cabinet A038368-01 Control Panel Assembly A038369-01 Control Panel with Decal A038382-01 Control Panel Hamess Assembly 038367-04 Control Panel Decal 038376-01 Control Panel For Upright, Cabaret, and Cocktail Cabinets 75-9910NO #5,-11 Steel Stamped Nut 62-039 SPDT Momentary Pushbutton Start Switch with Red Light-Emitting Diode 036895-01 Black Molded Switch Bezel 160013-001 Leaf Switch and Button Holder (leaf switch only is part no. 160012-001) 171016-001 Joystick Assembly 178030-003 Black Pushbutton Assembly
Maintenance, Repair and Parts Dig Dug™
Prior to removing or repairing the joystick, unplug the game. 99-080028 (Shaft)
To Repair the Joystick:
- First, remove the entire joystick assembly from the control panel (see Figure 3-3). Now locate the four screws in the plastic joystick frame and remove these screws. 99-080026 (Washer)
- Next, remave the clip ring from the bottom of the shaft. The assembly will come apart.
- To replace the bellows, pry it up and out of the plastic frame. @ Reassemble in reverse order. 99-080035 @ Note that the inner raised ring on the bellows is (Top Plate) longer on one side. This side goes on the top of the assembly (toward the control knob).
- To replace a leaf switch, you don’t need to disassemble the joystick. ® Using your thumbs, pry apart the plastic flanges on the switch holder. With your index finger, lift the switch up so that it will clear the plastic tab located 99-080029 on the outside end of the switch holder. (Washer) @ Slide the switch out of its holder. Replace the switch in reverse order. Adjust the switch for a narrow gap.
99-080031 (Betlows)
99-080025 99-080032 (Switch) Disassemble in the order indicated. (Circled numbers match the numbered instructions.) (Steel Washer)
99-080030 (Spring} ee 99-080034 1 (Sw.Plate)
99-080033 (Guard Actuator)
99-080027 (Sw. Actuator)
—--D)-+-—® "rina
Figure 3-4 Joystick Assembly Q) 82-AL616 (Screw)
314 171016-00"
Dig Dug™ Maintenance, Repair and Parts
JOYSTICK— TOP REAR VIEW
LEFT: BLUE, BLACK
DOWN: VIOLET, BLACK
UP: WHITE/BLACK, BLACK
RIGHT: GREY, BLACK
Figure 3-4 Joystick Assembly, continued Parts List
Part No. Description A038404-01 Joystick Harness 73-3003 Retaining Ring 82-AL616 #6 x 1-Inch Cross-Recessed Pan-Head Type BT Tapping Steel Screw 99-080025 Leaf Switch 99-080026 2nch Black Plastic Washer 99-080027 Nylon Switch Actuator 99-080028 Metal Shaft 99-080029 Nylon Washer 99-080030 Spring 99-080031 Bellows 99-080032 Flat Steel Washer 99-080033 Plastic Guard Actuator 99-080034 Switch Mounting Plate 99-080035 Top Plate 171016-001 Joystick Assembly
Maintenance, Repair and Parts Dig Dug™
C. Fluorescent Tube and Speaker
To Replace Fluorescent Tube: i
1. At the top front of the game, remove the three screws that secure the upper attraction-panel retainer to the cabinet. Loosen the three screws that secure the lower retainer to the cabinet. Lift the attraction panel up and out of its lower retainer. Remove the cardboard locking tab at each end of the tube. Slightly rotate the tube up or down, and carefully remove it from the lampholders. Replace with a new tube. Do not snap the tube in vigorously—you may break it, causing an implosion! Replace the locking tabs. Check that the green ground wire is securely attached to the large metal bracket and the ballast transformer on the wood panel. If the tube is not grounded, it may not start.
To Replace Speaker: Remove the two Phillips screws that secure the light board to the cabinet. Slide the board out and unpiug the 5-pin harness connector. Remove the board from the cabinet. Unplug the two plug-in connectors on the speaker. Remave the hardware that attaches the speaker to the board. Replace the speaker, reattach the plug-in connectors, reinstall the wood board and reconnect the harness.
Disassemble in the order indicated. ( numbered instructions.)
3-16 Circled numbers match the
Figure 3-5 Fluorescent Tube and Speaker
Upright Cabinet
Dig Dug™ Maintenance, Repair and Parts
179035-001 (Lampholder)
A037457-01 79-561816P (Harness) (Wire Nut)
70-304 (Tube) 142028-xxx 99-11003 (ransformer) (Starter) aoa? (Grd. Wire) 99-11009 = (Socket) \ 99-11006 (Tab)
Figure 3-5 Fluorescent Tube and Speaker, continued Upright Cabinet Parts List
Part No. Description
A037417-01 & -02 Fluorescent Tube and Speaker Assembly A037457-01 Light and Speaker Harness A037540-01 Ground Wire with Ring Lug 70-304 18-Inch 15W Cool White Fluorescent Tube
79-561816P Spring-Connector Wire Nut for 16- to 18-Gauge Wires 99-11003 Fluorescent Lamp Starter 99-11006 Fluorescent Lamp Locking Tab (tab consists of two pieces) 99-11009 Starter Socket 037469-01 Steel Lamp Bracket 142028-001 60 Hz 118V Ballast Transformer (used on A037417-01 assembly) 142028-002 50 Hz 118V Ballast Transformer (used on A037417-02 assembly) 148001-001 6 x9-Inch 4-Ohm 15W Oval High-Fidelity Speaker 179035-001 2-Pin Fluorescent Lamphoider
AOI7417-xx G 3-17
Maintenance, Repair and Parts Dig Dug™
e s 2. Remove the wood screw and flat washer used to secure D. Video Display the rear of the Upright display chassis to a wood cleat. Remove the hex nut, flat washer and carriage bolt used A— WARNING —A: to secure the Cabaret display chassis to a metal
Shock Hazard bracket.
- Open control panel (see Figure 3-2, The Control Panel) .
The following procedure should only be performed by a qualified service technician. Prior For the Cabaret cabinet, remove the upper display-
to removing or repairing the video display, unshield retainer.
plug the game. As an extra precaution, we
- Remove the video display shield. § §. Carefully remove the cardboard bezel. highly recommend you discharge the high voltage from the picture tube.
- Remove the four sets of hardware that secure the dis- High voltages may exist in any video display, Play chassis to the wood frame. even with power disconnected. Use extreme 7. Carefully pull the display out through the front of the
- Unplug the game. Unlock and open the table top and access panel (see Chapter 1, Section B).
- Reach through the access pane! opening and unplug the three display harness connectors underneath the display. Disconnect the ground wire.
- Seven screws (four Pan-Head and three Phillips-Head) To Remove Video Display and three Lctamps hold the display assembly to the Upright and Cabaret Cabinets: cabinet. Remove the screws and the L-clamps.
- Unplug the game. Open the rear access panel. Unplug 4. Carefully lift the display assembly up and out of the the three display harness connectors, and disconnect cabinet. Service the display and reinstall in reverse the ground wire. order.
037443-03 Bezel Disassemble in the order indica- ( ) ted. (Circled numbers match the 037517-01 numbered instructions.) (Bezel)
037529-01 |. (Bracket)
92-049
- (Video Display) 038274-01 | (Shield) 038327-01 La (Shield) Figure 3-6 Video Display Upright and Cabaret Cabinets
VA038275 va038320 3-18 A03775602 8
Dig Dug™ Maintenance, Repair and Parts
Disassemble in the order indicated. (Circled numbers match the : . 92-056 numbered instructions.) (4) (Video Display)
03779201 (Bracket) 38090-01 (Clamp)
Figure 3-6 Video Display, continued Cocktail Cabinet
Parts List
Part No. Description
Upright Cabinet 92-049 19-inch Electrohome Color Raster-Scan Video Display Acceptable substitute is part no. 92-055—use with TM-207 038274-01 Display Shield with Graphics 037443-03 Display Bezel Cabaret Cabinet 92-049 19-Inch Electrohome Color Raster-Scan Video Display Acceptable substitute is part no. 92-055--use with TM-201 037515-01 Upper Display-Shield Retainer 037517-01 Display Bezei 037529-01 Display Bracket 038327-01 Display Shield with Graphics Cocktail Cabinet A037541-01 Display Adaptor Harness A037756-02 14-Inch Color Video Display Assembly 92-056 44-Inch Color Electrohome Raster-Scan Video Display, model GO7-910 03779201 Display Mounting Bracket 038090-01 L-Clamp
Dig Dug™ Maintenance, Repair and Parts
E. Coin Doors
170000-001 (Lamp)
179047-001 (Lamp Base)
99-15040 (Lever) 72-1405S (Screw)
(Coin Inlet)
PART OF 99-15041 ; ; 99-15054 99-15055 af . 99-15041 (Pivot for Lever) (Retng Screw) 94 . (Lockout Coil} { 99-15053 {Lockt. Coil Spring) <7
99-15027 (Coin Ret. Box)
75-9148 (Hex Nut)
75-056 (Lock Wash.) 9015037 (Sw. Adjuster} 99-15056 (Screw for Bezel)
99-15029 (Bracket) 99-1 sos (Switch)
75-3414S (Screw)
72-1414S (Screw)
Figure 3-7 Vertical-Mounted Coin Door Upright and Cabaret Cabinets
A037619-01 thru -20 C 3-20
Dig Dug™
99-15070 (Door and Frame)
99-15063 (Screw)
99-15067 (Lock Assy.)
A037491-01 (Coin Box)
A037542-01 (Harness—not shown)
A037619-01 — U.S. 25¢/25¢ Coin Door A037619-02 — U.S. 50e/50¢ Coin Door A037619-03 — Canadian 25¢/25¢ Coin Door A037619-04 — British 10 P/10 P Coin Door A037619-05 — British 10 P/S0 P Coin Door A037619-06 — British 20 P/50 P Cain Door A037619-07 — Australian 20¢6/20¢ Coin Door A037619-08 — German 1 DM‘ OM Coin Door A037619-09 — German 2 DM/1 DM Coin Door 4037618-10 — German 2 DM/5 DM Coin Door A037619-11 — German 1 DM/5 DM Coin Door A037619-12 — 5 Fri5 Fr Coin Door 4037619-13 — Swiss 1 Fr/1 Fr Coln Door A037619-14 — French 1 Fr/1 Fr Coin Door Maintenance, Repair and Parts
99-15038 (Bezel for Button)
99-15001 thru 99-15011 {Ret. Button)
99-15052 (Spring for Button)
99-15065 (Clamp)
99-15039 (Bezel for Cover)
99-15036 (Cover)
99-15066 (Screw)
A037619-15 — French 2 Fri Fr Coin Door 4037619-16 — Swedish 1 Kr/1 Kr Coin Door A037619-17 — Spanish 25 Pts/25 Pts Coin Door AQ37619-18 — Italian 100 L/100 L Coin Door A037619-18 — Hong Kong $1/$1 Coin Doar A037619-20 — Japanese 100Y/100Y Coin Door
Figure 3-7 Vertical-Mounted Coin Door, continued Upright and Cabaret Cabinets
Maintenance, Repair and Parts Dig Dug™
Figure 3-7 Vertical-Mounted Coin Door, continued Upright and Cabaret Cabinets Parts List
Part No. Description A037491-01 Coin Box (Not included in assembly) ‘ A037542-01 Harness Assembly 71006-035 Metal Coin Mechanism 72-1405S #4-40 x %,-Inch Cross-Recessed Pan-Head Stee! Machine Screw 7214148 #4-40 x %Inch Cross-Recessed Pan-Head Steel Machine Screw 75-056 #6 Internal-Tooth Zinc-Plated Steel Lock Washer 75-9148 #4-40 Steel Machine Hex Nut 78-3414S #4-40 x %4-Inch 82° Cross-Recessed Flat-Head Steet Machine Screw 99-15001 Coin Return Button with U.S. 25¢ Price Plate 99-15002 Coin Return Button with U.S. $1 Price Plate 9989-15003 Coin Retum Button with German 1 DM Price Plate 99-15004 Coin Return Button with German 2 DM Price Plate 99-15005 Coin Return Button with German 5 DM Price Plate 99-15006 Coin Return Button with Belgian 5 Fr Price Plate 99-15007 Coin Return Button with French 1 Fr Price Plate 99-15008 Coin Return Button with Japanese 100 Yen Price Plate 99-15009 Coin Return Button with British 10 Pence Price Plate 99-15010 Coin Return Button with Australian 20¢ Price Plate 99-15011 Coin Return Button with Italian 100 Lire Price Plate 99-15025 Left Half of Coin Inlet 99-15026 Right Half of Coin Inlet 99-15027 Side Plate of Coin Return Box 99-15028 Base Plate of Coin Return Box 99-15029 Switch Bracket 99-15030 Flap for Lockout Coil (U.S. 25°) 99-15036 Metal Coin Return Cover 99-15037 Switch Adjuster 99-15038 Bezel for Coin Return Button 99-15039 Metal Bezel for Coin Return Cover 99-15040 Coin Return Lever 99-15041 Lockout Coil 99-15042 Coin Switch for U.S. 25¢ 99-15052 Spring for Coin Return Button 99-15053 Spring for Lockout Coil 99-15054 Pivot for Coin Return Lever 99-15055 Retaining Screw 99-15056 Screw for Both Bezels 99-15060 Switch Cover 99-15063 Screw for Hinge 99-15065 Clamp for Frame 99-15066 Screw for Clamp 99-15067 Lock Assembly 99-15070 Door and Frame 170000-001 6.3V Miniature Wedge Base Incandescent Lamp 179047-001 Lamp Base
3-22
Dig Dug™ Maintenance, Repair and Parts
99-15001 thru 99-15017 99-15038 (Ret. Button) (Bezel for Button)
99-15022 (Face Plate)
~~ 09-15082
{Spring for Button) 99-15051 (Lamp Holder) oO’
= 99-15026 (Lever) 99-15056 (Coin Inlet) % (Screw for Bezel)
99-15025 ———»_ 7 {Coin Inlet) (Bezel for Cover) Je 99-15039
PART OF 99-15036 99-15041 . (Cover) 99-15055 ty a 99-15041
(Retng. Screw) “S a (Lockout Coil)
¥ : 99-15053 } H (Lockt. Coil Spring) 99-15054 99-15027 (Pivot for Lever) (Coin Ret. Box) 1 . 99-15023 a NS (Base Plate) OB e STG LS > f a
~—+———._ 99- 15028 {Coin Ret. Box)
99-15037 (Sw. Adjuster) 99-15056 (Screw for Bezel) 99-15060 99-15029 (Bracket) 0.15042 ¢ (Switch) 4036597-01
a (Sw. Cover)
(Harness—not shown for clarity)
Figure 3-8 Double Coin Acceptor/Mount Assembly Cocktail Cabinet
A036693-01 thru -20 D 3-23
Maintenance, Repair and Parts Dig Dug™
Figure 3-8 Double Coin Acceptor/Mount Assembly, continued Cocktail Cabinet Parts List
Part No. Description A036597-01 Double Coin Acceptor Harness Assy. 99-15001 Coin Return Button with U.S. 25¢ Price Plate 99-15002 Coin Return Button with U.S. $1 Price Plate 99-15003 Coin Return Button with German 1 DM Price Plate 99-15004 Coin Return Button with German 2 DM Price Plate 99-15005 Coin Return Button with German 5 DM Price Plate 99-15006 Coin Return Button with Beigian 5 Fr Price Plate 99-15007 Coin Return Button with French 1 Fr Price Plate 99-15008 Coin Return Button with Japanese 100 Yen Price Plate 99-15009 Coin Return Button with British 10 Pence Price Plate 99-15010 Coin Return Button with Australian 20¢ Price Plate 99-15011 Coin Return Button with Italian 100 Lire Price Plate 99-15012 Coin Return Button with U.S. 50¢ (2 x 25¢) Price Plate 99-15013 Coin Return Button with British 20 Pence Price Plate 99-15014 Coin Return Button with British 50 Pence Price Plate 99-15015 Coin Return Button with French 2 Franc Price Plate 99-15016 Coin Return Button with Swiss 1 Franc Price Plate 99-15017 Coin Return Button with Hong Kong $1 Price Piate 99-15022 Dual-Entry Face Plate 99-15023 Single-Entry Base Plate 99-15025 Left Half of Coin Inlet 99-15026 Right Half of Coin Inlet 99-15027 Side Plate of Coin Return Box 99-1028 Base Plate of Coin Return Box 99-15029 Switch Bracket 99-15030 Flap for Lockout Coil (U.S. 25%) 99-15036 Coin Return Cover 99-15037 Switch Adjuster 99-15038 Bezel for Coin Return Button 99-15039 Bezel for Coin Return Cover 99-15040 Coin Return Lever 99-15041 Lockout Coil 99-15042 Coin Switch for U.S. 25¢ 99-15051 Lamp Holder 99-15052 Spring for Coin Return Button 99-15053 Spring for Lockout Coil 99-15054 Pivot for Coin Return Lever 99-15055 Retaining Screw 99-15056 Screw for Both Bezels 99-15060 Switch Cover
036693-01 — U.S. 25¢/25¢ Coin Door A036693-02 —- U.S. 500/50¢ Coin Door A036683-03 — British 10 P/10 P Coin Door A036683-04 — British 10 P/50 P Coin Door (A036683-05 — British 20 P/50 P Coin Door A036693-06 — German 1 OM/1 DM Cain Door A036693-07 — German 2 DM/1 DM Cain Door A036693-08 — German 2 DM/5 DM Coin Door A036693-08 — German 1 DM/5 DM Coin Door A036693-10 — Belgian 5 Fr/5 Fr Coin Door A036893-11 — French 1 Fri Fr Coin Door A036893-12 — French 2 Frit Fr Coin Door A036693-13 — Swedish 1 Kr/1 Kr Coin Door A038693-14 — Hong Kong $1/$1 Coin Door A036693-15 — Canadian 25¢/25¢ Coln Door 4036693-16 — Spanish 25 Pts/25 Pts Coin Door A036693-17 — Swiss 1 Fri1 Fr Coin Door A036693-18 — Italian 100 L/100 L Coin Door A036693-19 — Japanese 100Y/100Y Coin Door A026893-20 — Australian 20¢/20¢ Coin Door
Dig Dug™ Maintenance, Repair and Parts
F. Printed-Circuit Boards
To Remove Printed-Circuit Boards:
1,
- Carefully slide the PCB straight out of its retainers. (For the Upright cabinet, slide and /ift the Regulator/Audio |! PCB out of its slot.) Be careful not to twist the boards,
Prior to removing or repairing any printed-cir- as required. . cuit board, unplug the game.
To Replace Printed-Circuit Boards:
© Reinstall the PCB, making sure that the connectors are Properly plugged in. Note that they are keyed to fit only Open the rear access panel on the Upright and Cabaret one way, So if they don’t slip on easily, don't force them. cabinets. Open the table top on the Cocktail cabinet. A reversed connector will probably damage your game . Locate the hardware that secures the PCB to the cabi- and void the warranty. net. Remove and save this hardware. (The Cocktail cabi- @ Replace the hardware that secures the PCB to the cabinet Regulator/Audio Il PCB has no securing hardware.) net wall. Close and lock the rear access panel or table . If you are removing the game board, first remove the tie top. wraps that fasten the edge connector to that board. @ Check that the operation of the game is correct by per- Then unplug the edge connector. If you are removing forming the self-test. This is very important when you the Regulator/Audio || PCB, disconnect the three small repair a PCB. Unless you are a qualified technician, do harness connectors on this board. not turn the small knob on the Regulator/Audio It PCB.
REGULATORY
- GAME PCB (4) aupio 1! PCB
- GAME PCB
REGULATOR/ ®) AUDIO II PCB
Figure 3-9 Printed-Circuit Board Removal
3-25
3-26 Figure 3-10 Dig Dug™ Game PCB Assembly Qa 0 ma «
A038156-01 B
NOTICE TO ALL beni db RECEIVING THIS DRAWING
ly issued, and neither receipt nor
possession thereof confers or transfers any right in, or license to use, the subject matter of the drawing or any de-
sign or technical information shown thereon, nor any right
to reproduce this drawing or any part thereof. Except for
manufacture by vendors of Atari, Inc., and for manufacture under the corporation’s written license, no right is granted to reproduce this drawing or the subject matter thereof, unless by written agreement with or written permission from
the corporation. ue} ¢87 Bayes . * BeOo7 THE} <4 13@007 Bs fe xs3ca | 3 ese] G4 TEE err LSS] a E> R17 ca SCSZ54 ‘4 32087 WE T3575 |
i] 265367} (£SZG5) TMM 2O1eP ay {23298} 1Baso7 ee Bes07 pL
> 7 £50 EF a bee | 13@007
rN or RIS) 5B7SB EE PL S157, =} Ro TE} R25 5 . arora a ; 3 wcszar
a A BBA ‘ ° =22e7 SUP STE] geese so ase by 223369) ® C214 Ee} R143 Se cE Rs8 fees
8 ie au cas aE
cm Raa Z2S04 o een fit cer age eats 325) = & TO aoe §
co —_ RIEL] 2 \ER2055 | 3 4 ae! Sz) = 2052
vzIae fe cau] 25327) CS5ET ROS iz Ra) ee <42 aT) {ER-RO4 Be Re Sister Se EXEC) IEEYA YA-5-17] ToSzae] Ree
R _ a3 Tere) meres ie Ra
CE R15, we em secs
cas SEBS} CUSTOM mem [CSE | che 15139) CSIs 7)“ yes 7]
Ee) 3aco7 CUSTOM SF] s SS] SS) eS Bow
§
Citi Raee (S244
$ diode te rE . “tami SESTSE Sos CHE RIGS 71 faerie |¥1 ga hig 6 Foe saz wo i = Maintenance, Repair and Parts Dig Dug™
Dig Dug™ Maintenance, Repair and Parts
2s 2 ™ . Figure 3-10 Dig Dug’ Game PCB Assembly, continued Parts List
Part No. Description (Reference Designations and Locations in Bold)
A038156-01 Dig Dug Game PCB Assembly 24-250106 10 uF 25V Aluminum Electrolytic Fixed Axial-Lead Capacitor (C9, %2) 24-250107 100 uF 25V Aluminum Electrolytic Fixed Axial-Lead Capacitor (C1) 24-500476 47 uF 50V Aluminum Electrolytic Fixed Axial-Lead Capacitor (C4-7)
29-088 .1 uF 25V Ceramic-Disc Radial-Lead Capacitor (C2, 3, 8, 31-69) 31-1N4002 Type-1N4002 100V Switching Diode (CR2-4) 31-1N914 Type-1N914 75V Switching Diode (CR6, 7) 34-2N3904 Type-2N3904 NPN 60V 1W Transistor (Q1, 2)
34-2N6044 Type-2N6044 Darlington NPN Transistor (Q3-5) 37-4066 Type-4066 Quad Analog Switch Integrated Circuit (2L) 37-7406 Type-7406 Integrated Circuit (5C) 37-74LS00 Type-74LS00 Integrated Circuit (4R)
37-74LS08 Type-74LS08 Integrated Circuit (7H) 37-74LS20 Type-74LS20 Integrated Circuit (1H, 3P) 37-74LS32 Type-74LS32 Integrated Circuit (5E, 6F, 5G/H) 37-74LS74 Type-74LS74 Integrated Circuit (6H/J, 3R)
37-74LS86 Type-74LS86 Integrated Circuit (4A, 4B, 5B, 9C) 37-74LS139 Type-74LS139 Integrated Circuit (8/9A, 5D, 5F, 6H) 37-74LS157 Type-74LS157 Integrated Circuit (9A, 10A, 4K, 4M) 37-74LS161 Type-74LS161 Integrated Circuit (3F, 4F, 3H, 4N)
37-74LS 166 Type-74LS166 Integrated Circuit (8N) 37-74LS174 Type-74LS174 Integrated Circuit (5A, 10H/J, 2M/N) 37-74LS175 Type-74LS175 Integrated Circuit (9E) 37-74LS241 Type-74LS241 Integrated Circuit (10J/K)
37-74LS244 Type-74LS244 Integrated Circuit (4E) 37-74LS245 Type-74LS245 Integrated Circuit (8F, 8G, 8H, 8M) 37-74LS259 Type-74LS259 Integrated Circuit (1G/H, SM/N) 37-74LS273 Type-74LS273 Integrated Circuit (9B, 1L, 10M/N, 9R)
37-74LS367 Type-74LS367 Integrated Circuit (7D, 7F, 6G, 7G, 4H, 7J/K, 7K/L, 7M, 7P) 37-74LS374 Type-74LS374 Integrated Circuit (10E/F) 37-74LS377 Type-74LS377 Integrated Circuit (4D) 37-74LS393 Type-74LS393 Integrated Circuit (4C)
37-74S04 Type-74S04 Integrated Circuit (3A) 37-LM324 Type-LM324 Integrated Circuit (3D/E) 38-MV5053 Type-MV5053 Light-Emitting Diode (CR1) 62-001 SPST Momentary Pushbutton Switch (SW1)
66-118P1T 8-Station Single-Throw, Dual-Inline-Package Switch (2C, 2C/D) 72-6810S #8 x 5,-Inch Cross-Recessed Pan-Head Screw (for mounting PCB to cabinet wall) 78-24012 5-Inch Beaded Nylon Tie Wrap 79-42C22 22-Contact Medium-Insertion-Force Integrated Circuit Socket (10G)
79-42C24 24-Contact Medium-Insertion-Force Integrated Circuit Socket (7A/B, 8A/B, 6C-8C, 10C/D, 6D, 5L, 6L, 6M, 9M, SN, 6N/P, 6R, 8R) 79-42C28 28-Contact Medium-Insertion-Force Integrated Circuit Socket (10B, 8D, 2E, 8J, 1K, 9K, 8K/L, 5R, 7R) 79-42C40 40-Contact Medium-Insertion-Force Integrated Circuit Socket (6A/B, 5H/J, 6J/K) 79-42C42 42-Contact Medium-Insertion-Force Integrated Circuit Socket (1/2C, 1/2E) [Continued on next page]
3-27
Maintenance, Repair and Parts Dig Dug™
Figure 3-10 Dig Dug™ Game PCB Assembly, continued Parts List
Part No. Description (Reference Designations and Locations in Bold)
81-4302 Nylon Snap-In Fastener 90-7005 Random-Access Memory (3K, 3N) & 90-7036 Random-Access Memory (9EI/F, 9F/G, 9G/H, 9H, 9H/J, 9J/K) 110000-101 100 Ohm, +5%, %W Resistor (R80, 176) 110000-102 1K Ohm, +5%, “%4W Resistor (R1, 4-7, 10, 11, 14-7, 19, 24-46, 49-58, 67-70, 75, 78, 79, 81-96, 98, 111-126, 143-151, 154-167, 171-175, 177-180) 110000-103 10K Ohm, +5%, %4W Resistor (R12, 13, 47, 48, 59-66, 104, 105, 107, 108) 110000-104 100K Ohm, +5%, %W Resistor (R101, 106, 109, 110) 410000-151 450 Ohm, +5%, %W Resistor (R2) 110000-221 220 Ohm, +5%, %4W Resistor (R71, 73, 76, 152, 153, 168-170) 110000-222 2.2K Ohm, +5%, %W Resistor (R99, 127-142) 110000-223 22K Ohm, +5%, %4W Resistor (R103) 110000-331 330 Ohm, +5%, %W Resistor (R8, 9) 410000-471 470 Ohm, +5%, %4W Resistor (R72, 74, 77, 97) 110000-472 4.7K Ohm, +5%, YW Resistor (R20-23, 100) 110000-473 47K Ohm, +5%, %W Resistor (R102) 110001-152 1.5K Ohm, +5%, V2W Resistor (R3) 111004-224 .22 uF 25V Ceramic Disc Radial-Lead Capacitor (C13) 122004-224 .22 uF 25V Ceramic-Disc Radial-Lead Capacitor (C13) 122005-103 .01 pF 25V +10% Ceramic Disk Radial-Lead Capacitor (C14-30) 128002-101 100 pF 100V Epoxy-Dipped Radial-Lead Mica Capacitor (C10, 69) 128002-330 33 pF 100V Epoxy-Dipped Radial-Lead Mica Capacitor (C11, 70) 131003-001 Type-1N5257B 6.2V 1W Zener Diode (CRS) 136007-101 Programmable Read-Only Memory, ROMO (6L) 136007-102 Programmable Read-Only Memory, ROM1 (6M) 136007-103 Programmable Read-Only Memory, ROM2 (6N/P) 136007-104 Programmable Read-Only Memory, ROM3 (6R) 136007-105 Programmable Read-Only Memory, ROM4 (6C) 136007-106 Programmable Read-Only Memory, ROMS = (6D) 136007-107 Programmable Read-Only Memory, ROM6 (SL) 136007-108 Programmable Read-Only Memory (8R) 136007-109 Programmable Read-Only Memory (2K/L) 136007-110 Programmable Read-Only Memory (2P) 136007-111 Programmable Read-Only Memory (4G) 136007-112 Programmable Read-Only Memory (10K/L) 136007-113 Programmable Read-Only Memory (1R) 136007-114 Programmable Read-Only Memory (9N)
136007-115 Programmable Read-Only Memory (10C/D) 136007-116 Programmable Read-Only Memory (8C) 136007-117 Programmable Read-Only Memory (7C) 136007-118 Programmable Read-Only Memory (8A/B) 136007-119 Programmable Read-Only Memory (7AIB) 137161-001 Read-Only Memory (10G) 137168-001 Type-74LS368 Integrated Circuit (SN/P) 137169-001 Type-74LS107 Integrated Circuit (1J/K, 2R)
3-28 [Continued on next page]
Dig Dug™
Figure 3-10 Dig Dug™ Game PCB Assembly, continued Parts List
Part No.
137177-001 137186-001 137187-001 137188-001
137189-001 137190-001 137191-001 137192-001
137193-001 137194-001 137199-001 137200-001
137201-001 137202-001 137203-001 137204-001
137209-001 137211-001 137217-001 144000-002
175004-706 179051-001 Description (Reference Designations and Locations in Bold) Maintenance, Repair and Parts
Type-74LS138 Integrated Circuit (3B/C, 2G/H, 10N/P) Multi-CPU Bus Controller Custom Chip 08 (8D, 8J, 8K/L) Coin and I/O Controller Custom Chip 51 (1/2E) Steering Controller Custom Chip 53 (1/2C)
Video Ram Addresser Custom Chip 00 (7R) Universal Shift Register Custom Chip 02 (10B) Motion Object Controller Custom Chip 04 (9K) Controller Custom Chip 06 (2E)
Sync Generator Custom Chip 07 (1K, 5R) 4.0 MHz Z80A Central Processing Unit (6A/B, 5H/J, 6J/K) Random-Access Memory (3G, 4J) Type-74LS365 Integrated Circuit (2J, 3J)
Type-74LS298 Integrated Circuit (2H/J, 10L/M, 10R) Type-74128 Integrated Circuit (3A/B) Type-74LS158 Integrated Circuit (3M) Type-74LS283 Integrated Circuit (3C/D, 1M, 4P)
Type-74S174 Integrated Circuit (1N/P) Static Random-Access Memory (9M) Type-74S257 Integrated Circuit (1H/J) 18.432 MHz Crystal (Y1)
#6 Spacer for Mounting Printed Circuit Board Test Point Acceptable substitute is part no. 020670-01
3-29
Maintenance, Repair and Parts Dig Dug™
NOTICE TO ALL PERSONS RECEIVING THIS DRAWING CONFIDENTIAL: Reproduction forbidden without the specific written permission of Atari, Inc., Sunnyvale, CA. This drawing is only conditionally issued, and neither receipt nor possession thereof confers or transfers any right in, or license to use, the subject matter of the drawing or any design or technical information shown thereon, nor any right to reproduce this drawing or any part thereof. Except for manufacture by vendors of Atari, Inc., and for manufacture under the corporation's written license, no right to reproduce this drawing is granted or the subject matter thereof unless by written agreement with or written permission from the corporation.
x
Py O os O Zz NO
TIP32 TOA2Z002ZA TDA2002A W3Q2,_ iN4cOz Q5 Q7 CR ——} fle N Rote as C? Goan 8S ceca iS SIRS |, Cel cist) C2 Gon)
Figure 3-11 Regulator/Audio || PCB Assembly
3-30 A035435-01 F
Dig Dug™
Part No. Maintenance, Repair and Parts
Figure 3-11 Regulator/Audio |! PCB Assembly Parts List
Description (Reference Designations and Locations in Bold)
A035435-01 19-100P1015 19-315102
24-250108
24-250477 24-350338 29-088 31-1N4002
33-TIP32 34-2N3055 37-LM305 72-1608C
72-6606S 75-99516 75-F60405 78-16008
78-16014 79-58306 79-58308 79-58354
034531-01 100015-103 110000-010 110000-100
110000-101 110000-102 110000-103 110000-271
110000-330 110000-392 110000-562 110000-752
110001-221 110009-027 122002-102 122004-224
137151-002 179051-001 Regulator/Audio 11 PCB Assembly Acceptable substitute is part no* A035435-02 thru -04. -1 Ohm, +3%, 7W Wirewound Resistor (R24) 1K Ohm Vertical PCB-Mounting Cermet Trimpot (R8) Acceptable substitute is part no. 119002-102. 1000 pF 25V Aluminum Electrolytic Fixed Axial-Lead Capacitor (C13)
470 uF 25V Aluminum Electrolytic Fixed Axial-Lead Capacitor (C1, 4, 12) 3300 pF 35V Aluminum Electrolytic Fixed Axial-Lead Capacitor (C9, 10) .1 pF 25V Ceramic-Disc Radial-Lead Capacitor (C3, 11) Type-1N4002 100V 1-Amp. Silicon Rectifier Diode (CR1, 4)
Type-TIP32 PNP Power Transistor (Q2) Type-2N3055 NPN Silicon Transistor (Q3) 5V Linear Voltage Regulator (Q1) #6-32 x ¥V2-Inch Cross-Recessed Pan-Head Corrosion-Resistant Steel Machine Screw
#6 x %-Inch Pan-Head Thread-Forming Cross-Recessed Type-AB Zinc-Plated-Steel Screw #6-32 Nut/Washer Assembly #6-32 x %-Inch Binder-Head Nylon Screw Thermally Conductive Compound (Q3)
Thermally Conductive Silicon Insulator (Q2) 6-Position Connector Receptacle (J6) 9-Position Connector Receptacle (J7) 4-Position Connector Receptacle (J8)
Heat Sink .01 pF 25V Ceramic-Disc Radial-Lead Capacitor (C5, C14) 1 Ohm, +5%, %W Resistor (R10, 19) 10 Ohm, +5%, %4W Resistor (R11, 20, 29, 30)
100 Ohm, +5%, “%W Resistor (R4, 12, 22) 1K Ohm, +5%, %4W Resistor (R27, 28) 10K Ohm, +5%, %4W Resistor (R13, 14) 270 Ohm, +5%, %W Resistor (R1)
33 Ohm, +5%, %4W Resistor (R93) 3.9K Ohm, +5%, %W Resistor (R6) 5.6K Ohm, +5%, “%W Resistor (R32, 33) 7.5K Ohm, +5%, %W Resistor (R7)
220 Ohm, +5%, /2W Resistor (R9, 21) 2.7 Ohm, +5%, 1W Resistor (R5) .001 pF 25V Ceramic-Disc Minimum Radial-Lead Capacitor (C2, 7, 16) .22 uF 25V Ceramic-Disc Capacitor (C6, 8, 15, 17)
Type-TDA2002A 8W Linear Audio Amplifier (Q5, 7) Test Point Acceptable substitute is part no. 020670-01.
3-31
Maintenance, Repair and Parts Dig Dug™
G. Power Supply Assembly
Fuse cover must be in place during A035888-01 1 A game operation. (Transformer) C
A035888-03 (Shid. Trnsfmr.) =I
A021084-xx (Volt. Plugs)
29-053 Capacitor) cap 034544-01 (Fuse Block Cvr.)
79-4411001 (Fuse Post) 78-70501SC ' (Cap. Bracket) LL 46-2017002 (Fuse)
A035891-01 (Fuse Harness) 034482-02 (Chassis)
46-301203 ° (Fuse) FN Z
037639-01 (Label)
78-2708 (Bushing)
A034630-01 Fie eee (Filter Assy.) bathe 46-2014002 (Fuses)
79-15021001 A035890-01 (Term. Block) (Pwr. Harness)
A034629-01 3A-MDA3501 (Rectifier) (AC. Harn.)
Figure 3-12 Power Supply Assembly
A037671-xx C
A037672-xx A 3-32
Maintenance, Repair and Parts
Figure 3-12 Power Supply Assembly, continued Parts List
Voltage Plug for 120V (yellow) s
Upright and Cabaret Transformer Assembly (T1) Acceptable substitute is part no. A035888-02 Cocktail Shielded Transformer Assembly (11) Acceptable substitute is part no. A035888-04
4-Amp. 250V 3AG Slow-Blow Glass Cartridge-Type Fuse (F2, F4-F6) 7-Amp. 250V 3AG Slow-Blow Glass Cartridge-Type Fuse (F1)
20-Amp. 32V 3AG Slow-Blow Glass Cartridge-Type Fuse (F3) Nylon Type 6/6 Hole Bushing with %-Inch Inside Diameter x °%,-Inch Outside Diameter
5-Position 3AG Fuse Block with %4-Inch Quick-Disconnect Terminals Panel-Mounting Non-Indicating 3AG Cartridge-Type Fuse Post
Metal Base Plate (goes under the power supply—not shown in illustration) Dig Dug™
Part No. Description (Reference Designations in Bold)
| A021084-01 | Voltage Plug for 100V | (violet) |
A021084-02
| A021084-04 | Voltage Plug for 220V | (blue) |
| A021084-05 | Voltage Plug for 240V | (brown) |
A034629-01 A.C. Harness Assembly
| A034630-01 | RFI Filter Assembly | (FL1) |
A035888-01 A035888-03
A035890-01 Power Harness Assembly A035891-01 Fuse Harness Assembly A037671-xx* Upright and Cabaret Power Supply Assembly A037672-xx* * Cocktail Power Supply Assembly
29-053 27,000 pF 15V DC Electrolytic Capacitor (C1) 3A-MDA3501 Bridge Rectifier, Type MDA 3501 (CR1) 46-2014002 46-2017002
46-301203 78-2708 x V-Inch Thick 78-70501SC 2-Inch Diameter Capacitor Mounting Bracket 79-15021001 2-Circuit Single-Row Terminal Block
79-3206 79-4411001 034482-02 Power Supply Chassis 034544-01 Fuse Block Cover
037243-01
| 037639-01 | Label for Fuse Value | (F1) |
| 037641-01 | Label for Fuse Values | (F2-F6) |
*A\037671-01 power supply assembly has the 120V plug A037671-02 has the 100V, 220V and 240V plugs A037671-03 has the 220V and 240V plugs
**A037672-01 power supply assembly has the 120V plug A037672-02 has the 100V, 220V and 240V plugs A037672-03 has the 220V and 240V plugs
Line Voltage Range 90-110 VAC (100) 105-135 VAC (120) 200-240 VAC (220) 220-260 VAC (240) Voltage Selection Plug Wire Color Violet Yellow* ** Blue Brown ***This is the only plug provided on the North American power supply.
3-33
NOTES:
NOTES:
NOTES:
NOTES:
~
YOUR COMMENTS, PLEASE!
Your comments will assist Atari in improving the usefuiness of our publications They are an important part of preparing for revisions of game manuals. No postage stamp is necessary if mailed in the U.S.A.
If you have any technical questions about certain ATARI games products, or are requesting additional publications, we will immediately forward your note to the appropriate person.
Page: Commenis:
Fill in if you wish a reply:
Name.
Firm — Distrioutor
Address ‘Operator City State — Zip Ui Other. Dig Dug™ 2nd printing
Area Code Phone
First told
BUSINESS REPLY MAIL
FIRST CLASS PERMIT NO. 1004 SUNNYVALE, CA POSTAGE WILL BE PAID BY ADDRESSEE
Atari, Inc. Attn.: Field Service/Coin-Op Division P. O. Box 427 Sunnyvale, California 94086
Second fold
aBpa siyy adey
EES EE ES EE tener Seller warrants that its printed-circuit boards and parts thereon are free from defects in material and workmanship under normal use and service for a period of ninety (90) days from date of shipment. Seller warrants that its video displays (in games supplied with displays) are free from defects in material and workmanship under normal use and service for a period of thirty (30) days from date of shipment. None of the Seller's other products or parts thereof are warranted.
If the products described in this manual fail to conform to this warranty, Sellers’ sole liability shall be, at its option, to repair, replace, or credit Buyer's account for such products which are returned to Seller during said warranty period, provided:
- Seller is promptly notified in writing upon discovery by Buyer that said products are defective;
- Such products are returned prepaid to Sellers’ plant; and
- Seller's examination of said products discloses to Seller's satisfaction that such alleged defects existed and were not caused by accident, misuse, neglect, alteration, improper repair, installation or improper testing.
In no event shall Seller be liable for loss of profits, loss of use, incidental or consequential damages.
Except for any express warranty set forth in a written contract between Seller and Buyer which contract supersedes the terms of this order, this warranty is expressed in lieu of all other warranties expressed or implied, including the implied warranties of merchantability and fitness for a particular purpose, and of all other obligations or liabilities on the Seller's part, and it neither assumes nor authorizes any other person to assume for the Seller any other liabilities in connection with the sale of products under this order,
The use of any non-Atari parts may void your warranty, according to the terms of the warranty. The use of any non-Atari parts may also adversely affect the safety of your game and cause injury to yourself and others. Be very cautious in using non-Atari-supplied components with our games, in order to insure your safety.
Atari distributors are independent, being privately owned and operated. In their judgment they may sell parts or accessories other than Atari parts or accessories. Atari cannot be responsible for the quality, suitability or safety of any non-Atari part or any modification including labor which is performed by such distributor.
This document is and contains confidential trade secret information of Atari, Inc.
This document is foaned under confidential custody for the sole purpose of operation, maintenance or repair of Atari equipment and may not be used by or disclosed to any person for any other purpose whatever, and remains the property of Atari, Inc.
Neither it nor the information it contains may be reproduced, used, or disclosed to persons not haying a need to know consistent with the purpose of the loan, without written consent of Atari, Inc.
ATARI = + ATARI ING "790 SYCAMORE DRIVE * P.O. BOX 906
-3100 « TAS, CALIFORN TELEX