CATHODE RAY TOMES

Gravitar TM-206 2nd Printing

Gravitar (version 3) (Atari, 1982) · Technical Manual · 60 pages · 43 sections · original scan

Page 1

1s Soe *

«@ Operation,

Maintenance and

j ~ Service Manual r , = Complete with =

IIlustrated Parts Lists

Page 2

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 3

Operation, Maintenance and Service Manual

Complete with Illustrated Parts Lists

Page 4

© 1982 by Atari, inc. All rights reserved. No part of this publication may be reproduced by any mechanical, photographic, or electronic process, or in the form of a phonographic recording, nor may it be stored in a retrieval system, transmitted, or otherwise copied for public or private use, without permission from the publisher.

The Gravitar™ game play, ali graphic designs, this technical manual, its accompanying schematic diagrams, and the display manual are protected by the new Copyright Act of 1976.

This Act provides for increased penalties for violating federal copyright laws. Courts can impound infringing articles while legal action is pending. If infringers are convicted, courts can order destruction of the infringing articles.

In addition, the Act provides for payment of siatutory damages of up to $50,000 in certain cases. Infringers may also have to pay costs and attorneys' fees, fines up to $25,000, and face an imprisonment of up to one year.

Atari will aggressively enforce its copyrights against any infringers. We will use all legal means to immediately halt any manufacture, distribution or operation of a copy of video games made by us. Anyone who purchases such copies risks forfeiting such a game.

Published by: ATARI, INC. 790 Sycamore Drive PO. Box 906 Milpitas, California 95035

Lithographed in the U.S.A.

Page 5

Notice Regarding Non-ATARI Parts

WARNING Use of non-ATARI parts or modifications of your ATARI game circuitry may adversely affect the safety of your game, and may cause injury to you and your players.

The warranty printed on the inside back cover of this manual may be voided, if you do any of the following: @ Substitute non-ATARI parts in your coin-operated game, or @ Modify or alter any circuits in your ATARI game by using kits or parts not supplied by Atari. The use of any non-ATARI parts will void the warranty, and any such alteration may also adversely affect the safety of the game and may cause injury to you and

FERENCE

to licensed communications services is not permitted by the FCC (Federal Communications Commission).

\f you suspect interference from an ATARI game at your location, check the following: @ All grounds (green wires) in the game are properly connected as shown in the game wiring diagram, and @ The power cord is properly plugged into a grounded 3-wire outlet. If you are unable to solve the interference problem, please contact ATARI Customer Service. See page vi for service in your area.

Page 6

Table of Contents

Set-Up Procedures A. New Features ..... 0.6.6 cece cece recente teen net e net e eee 1-3 B. Game Inspection .. . 13 C. Game Installation....... 1-3

  • Installation Requirements . 1-3
  • Voltage Selection . 1-3 D. Switch Locations .. 1-4
  • On/Off Switch .... 1-4
  • Utility Panel Switches . 1-4
  • Option Switches .... 1-4 E. Option Switch Settings .... » 15 F. Self-Test Procedure ....... . 17 G. GamePlay ......... 19
  • Demonstration Mode . » 19
  • Attract Mode «0... cece eee cette eee eee eee 1-9
  • Play Mode
  • High-Score Mode .
  • Hints for Game Play

Troubleshooting A. Comments on Troubleshooting............ 00: e cee e eee eee eens 2-2 B. Self-Test Procedure ........... 006s cece cece eee n ence enee 22

Maintenance, Repair, and Parts ONMOODPY Cabinet-Mounted Assemblies... ......... 00.00 cece eee e eee 3-2 The Control Panel .......... 3-6 Fluorescent Tube and Speaker 3-8 Video Display......... 3-12 Coin Door........ 3-16 Printed-Circuit Boards . . 349 Power Supply Assembly .......... 000. c cece eee eee eee eee 3-27

Page 7

List of Illustrations

Figure 1-1 Game Overview .. 2.0.0.0... cece cece eee eee eee 1-2 Figure 1-2 Game Switch Locations .. 4-4 Figure 1-3. Operator Information Display . a é . 17 Figure 1-4 Self-Test Display .. 0.2.0.2... 0... c ccc cee teens 1-8

Figure 2-1 Self-Test Screen 1—Test Passes... ........ 0... e cece eee eee eee 2-2 Figure 2-2 Self-Test Screen 1—Test Fails. . : : . 23 Figure 2-3 Self-Test Screen2 2.2.0.0... cece eee tees 2-3 Figure 2-4 Self-Test Screen3 2.0.02... 0... c cece cece e eee eee 2-4

Figure 2-5 Self-TestScreen4 .. Figure 2-6 Self-Test Screen5 .. Figure 2-7 Self-TestScreen6 .......... 6. c eee ect c een eee Figure 2-8 Screen 7—Self-Test Screens During Diagnostic Program

Maintenance, Repair, and Parts: Figure 3-1 Cabinet-Mounted Assemblies, Upright Cabinet . 3-2 Cabinet-Mounted Assemblies, Ireland-Built Cabinet . 3-4 Figure 3-2 Control Panel . . 36 Figure 3-3 Control Panel Assembly ..........0.. 00200. c eee eee cee eee 3-7

Figure 3-4 Fluorescent Tube and Speaker, Upright Cabinet ................. Fluorescent Tube and Speaker, Ireland-Built Cabinet .. . Figure 3-5 Video Display (Weils-Gardner)—Upright Cabinet....... Video Display (Wells-Gardner)—lreland-Built Cabinet . . .

Video Display—Amplifone Deflection PCB Removal ............- Video Display—Amplifone High-Voltage PCB Removal eee Video Display—Amplifone CRT Removal ...............000 000s Figure 3-6 Vertically Mounted Coin Door........... 0.0: cece eee eee

Figure 3-7 Printed-Circuit Board (PCB) Removal .............0. 00... cee e ee 3-19 Figure 3-8 GravitarGame PCBAssembly .............0 0.00: eee eee eee 3-20 Figure 3-9 Regulator/Audio || PCB Assembly ............0. 2... 0ce eee eee 3-25 Figure 3-10 Power Supply Assembly .......... 00.60. c cece cece eee eee ee 3-27

Table 1-1 Game Price Options Table 1-2 Special Options .... Table 1:3. Game Play Options . 5 Table 1-4 —- Self-Test Procedure ...............

Table 1-5 Gravitar High-Score Lists ... Tabie 1-6 Gravitar Scoring

Page 8

If reading through this manual does not lead to solving a certain maintenance problem, call TELEHELP® at the Atari Customer Service office in your geographical area, as shown below.

WEST and CENTRAL U.S.A. Parts and Service

Atari, Inc. California Customer Service Office 1105 N. Fair Oaks Avenue P. O. Box 427, Sunnyvale, CA 94086 Telex 17-1103 (Monday-Friday, 7:30-4:00 pm Facific Time) =e From California, Alaska, or Hawaii © (408) 745-2900 = Service from anywhere in the area shown in white © toll-free (800) 538-1611

EAST U.S.A. Service only

Atari, Inc New Jersey Customer Service Office 12A World's Fair Drive, Somerset, NJ 08873 Telex 37-9347 (Monday-Friday, 7:30-4:00 pm Eastern time) From New Jersey 2s (201) 469-5993 = From anywhere else in this area @ ‘toll-free (800) 526-3849

EUROPE

Parts and Service

Atari Ireland Limited European Customer Service Office Tipperary Town, Ireland Telex 28165 TIPPERARY TOWN, (Monday-Friday, 9:00-6:00 pm GMT) IRELAND @ 0062-52155

vi

Page 9

Set-Up Procedures

How to Use This Manual

This manual, written for game operators and service technicians, describes the Gravitar™ game. The manual contains information about the Upright and Ireland-built Gravitar cabinets. Whenever information is unique to the Upright

cabinet, this symbo! appears: i built cabinet, this symbol appears: wh

Whenever information is unique to the /reland-

Chapter 1 describes new features, game setup, option switch settings, self-test procedures, and game play. Chapter 2 contains troubleshooting procedures. Chapter 3 details maintenance, repair, and parts information. In addition, schematic diagrams of the game circuitry are included with this manual. Figures 1-1 and 3-1 illustrate the game cabinet. Italicized lettering on these figures refers you to other places in the manual for information about specific cabinet parts.

Chapter

Page 10

Set-Up Procedures Gravitar™

ATTRACTION PANEL See Figures 3-1 & 3-4 FLUORESCENT TUBE ‘AND SPEAKER See Figure 3-4

SPEAKER ve VIDEO DISPLAY See Figure 3-5

CONTROL PANEL See Figures 3-2 & 3-3

SPEAKER G

COIN DOOR See Figure 3-6 KEY LOOPS

GAME PCB See Figures 3-7 & 38

REGULATOR! AUDIO II PCB See Figures 3-7 & 3-9

UTILITY PANEL See Figure 1-2

POWER ON/OFF SWITCH POWER SUPPLY See Figure 3-10 SHOCK HAZARD

Connect this game only to a grounded 3-wire outlet. If you have only a 2-wire outlet, we recommend you hire a licensed electrician to install a grounded outlet. Players may receive an electric shock if this game is not properly grounded!

Figure 1-1 Game Overview

1-2

Page 11

Gravitar™

A. New Features

The Gravitar™ game has four new features. Even if you are familiar with ATARI®@games, you should

note these important differences:
  • Shielded Game Speakers. These 8-ohm, 6-ounce, high-fidelity speakers provide exceptional audio. The speaker magnets are shielded.
  • Key Loops. The utility panel has two key loops. They provide a convenient place to store keys for the rear access panel and lower coin door.
  • High-Score Table. There are eight different titles for the high-score table. The title is determined by the highest score registered (see G. Game Play). 4, Molded Coin Box. This game has a sleek, onepiece molded coin box with handles on either end for easier carrying. New features and all other major parts in the game are illustrated in Figure 1-1. Throughout this manual, wherever one of these new features is mentioned, you will see this symbol:

B. Game Inspection

Please inspect your game carefully to ensure that it was delivered to you in good condition.

[ne NOTE reve | Do not plug in the game yet!

  • Examine the exterior of the game cabinet for dents, chips, or broken parts.
  • Remove the screws that were used as extra security to seal the rear access panel. Unlock and open this panel and the coin door; inspect the interior of the game as follows: a. Ensure that all plug-in connectors (on the game harness) are firmly plugged in. Replug any connectors found unplugged. Don’t force connectors together. The connectors are keyed so they only fit in the proper orientation. A reversed edge connector may damage a PCB and will void your warranty. b. Ensure that all plug-in integrated circuits on the PCB are firmly plugged into their sockets. c. Remove the tie-wrap that secures the coiled power cord inside the cabinet. Inspect the ‘Set-Up Procedures

power cord for any cuts or dents in the insulation. Repair or replace it as required. Place ithe square biack piasiic strain-reiief piate in the wood slot at the bottom of the rear panel opening.

WARNING To avoid electrical shock, do not touch internal parts of the display with your hands or with metal objects held in your hands!

d. Note the game serial number. It is printed on a label on the back of the cabinet. Verify that the same serial number is also on the Gravitar game PCB, Regulator/Audio I! PCB, power supply, and video display. A drawing of the serial-numbered components is on the inside front cover of this manual. Please mention this number whenever you call your distributor for service. e. Inspect major subassemblies, such as the power supply, control panel, and video display, for secure mounting.

C. Game Installation

  • Installation Requirements

Power 200 W Temperature 0 to 38°C (32 to 100°F) Humidity Not over 95% relative Upright Cabinet 64 x 80 cm (25 % x 31 % in.) 184 cm (72 ¥2 in.) Ireland-Built Cabinet Space Required 64 x 79 cm (25 % x 31 in.) Game Height 174 cm (68 % in.) Space Required Game Height

  • Voltage Selection The power supply used in this game operates on the line voltage of almost any country in the world. The power supply comes with either one, two, or three different voltage selection plugs. Plug voltages and wire colors are 100 VAC (violet wire color), 120 VAC (yellow wire color), 220 VAC (blue wire color), and 240 VAC (brown wire color). Before plugging in your game, check your line voltage. Then check the wire color on the voltage selection plug that is plugged into your power supply. Make sure the voltage selection plug is correct for your location’s line voltage (see Figure 3-10).
Page 12

Set-Up Procedures

D. Switch Locations

  • On/Off Switch The on/off switch is located on the back of the cabinet, lower left side (see Figure 1-2).
  • Utility Panel Switches The utility panel includes the volume control, selftest switch, coin switch, and coin counter(s). The coin switch is used to credit the game, and it acti- Gravitar™

vates the left coin counter. These switches are located inside the upper coin door (see Figure 1-2).

  • Option Switches Option switches are located on the game PCB (see Figure 1-2). a. Game price options are at PCB location B4. b. Game play options are at PCB location D4. c. Special options are at PCB location P10/11.

UTILITY PANEL

COIN SWITCH

COIN COUNTER OPTION SWITCHES.

Prot @ 4-1

SWITCH AT B4

SELF-TEST KEY LOOP (Game Price)

SWITCH SWITCH AT D4 VOLUME CONTROL seen pron (To increase, turn clockwise) POWERONIOFF SWITCH (Special Options)

Figure 1-2 Game Switch Locations

1-4

Page 13

Gravitar™

E. Option Switch Settings

Tables 1-1, 1-2, and 1-3 detail game option switch settings. Options are preset at the factory and shown by the « symbols. However, you may change the settings to suit your individual needs. ‘Set-Up Procedures.

To verify option switch settings, power the game off and then on again. Set the self-test switch to on and verify the settings on the self-test screen. Then set the self-test switch to off.

Table 1-1 Game Price Options

This table contains the switch settings for options relating to game price, coin mechanism multipliers, and bonus play. The ‘switches are on the game PCB at location 84 and are accessible when the game PCB is mounted in place.

The coin mechanism is a device on the inside of the coin door that inspects the coin to determine if the correct coin has been inserted. After this inspection, the mechanism either accepts or rejects the coin.

The multipliers (toggles 4-6) determine how much each coin mechanism will be worth to the game's logic. The coin door has two mechanisms. The basic unit of measurement is a coin worth $.25 or 1 DM, which equals a multiplier of x1. Therefore, if you have a2 OM/1DM. coin door, you may want to set the left multiplier at x2 and the right multiplier at x1.

You may offer bonus play for certain combinations of coins inserted. For example, with the game set at $.25 per play, players who deposit four successive quarters, then press the start switch, can receive a bonus play. The bonus feature encourages players to insert more money than just the minimum $.25 required for one game. All coins must be inserted before pressing the start switch.

Settings of 8-Toggle Switch on Gravitar PCB (at B4)

7654321

8 Option

OffOnFree play
OnOn1 coin for 2 credits
OffOff1 coin for 1 credit <
OnOff2 coins for 1 credit
OffOffRight coin mechanism x 1 <4
OnOffRight coin mechanism x 4
OffOnRight coin mechanism x 5
OnOnRight coin mechanism x 6

Off Left coin mechanism x 1 < On Left coin mechanism x 2

Off Off Off

Off On Off

On On Off

Off Off On

On Off On

Off On On

No bonus coins < For every 4 coins inserted, logic adds 1 more coin

For every 4 coins inserted, logic adds 2 more coins For every 5 coins inserted, logic adds 1 more coin For every 3 coins inserted, logic adds 1 more coin No bonus coins

No bonus coins

<4. Manufacturer's recommended settings

Table 1-2 Special Options

Settings of 4-Toggle Switch on Gravitar PCB (at P10/11)

4321

Option On Off Credits counted on one coin counter. Credits counted on two separate coin counters

1-5

Page 14

Set-Up Procedures. Gravitar™

Table 1-3 Game Play Options

This table contains the switch settings for options relating to game difficulty, bonus levels, and ships per game. The switches are on the game PCB at location D4 and are accessible when the game PCB is mounted in place.

Settings of 8-Toggle Switch on Gravitar game PCB (at D4)

7654321Option
OnOnNo bonus
OffOffBonus ship every 10,000 points <
OnOffBonus ship every 20,000 points
OffOnBonus ship every 30,000 points

On Easy game play < Off Hard game play

Not used

OffOff3 ships per game <
OnOff4 ships per game
OffOn5 ships per game
OnOn6 ships per game

“Manufacturer's recommended settings

Page 15

Gravitar™

F. Self-Test Procedure

This game will test itself and provide data to show that the game's circuitry and controls are operating properly. The data is provided on the video display and speaker. No additional equipment is necessary. We suggest you perform the self-test procedure when you first set up the game, any time you collect money from the game, when you change game options, or when you suspect game failure. Wait at least 10 seconds after playing a game before entering self-test. Otherwise you may erase Set-Up Procedures

the top three scores in the high-score table or distort the statistics. All credits will be cancelled when you enter self-test. Refer to Figure 1-2 for the location of the self-test switch and option switches. To see the Operator Information Display, set the self-test switch to on (see Figure 1-3). To enter self-test, hold the FIRE button down while pressing 1-player start (see Figure 1-4). To end the self-test, set the self-test switch to off. The complete self-test procedure is explained in Chapter 2, Self-Test Procedure. If a part of the test described in Figure 1-4 fails, refer to Chapter 2.

NO. OF CREDITS PER COIN FOR GAME DIFFICULTY RIGHT COIN MECHANISM

NO. OF CREDITS NO. OF CREDITS FOR EACH PUSH OF —_—_—_,. E PER COIN FOR UTILITY COIN SWITCH ann | LEFT COIN MECHANISM BONUS ADDER _ SRESS START | AND FIRE

FOR TEST ““\ _ INSTRUCTION FOR SELF-TEST OR TO ERASE SCORES OR TIMES

SHIPS PERGAME ———>+ OOO Oooooo«———————_ N°. OF GAMES PLAYED

o0000 ee AVERAGE COCKTAIL CABINET

Figure 1-3 Operator Information Display

The Operator Information Display shows game statistics. You may also erase game scores and times. To see this display, set the self-test switch to on. GAME TIME

To erase game scores: 1, Push 1-PLAYER START until display treads PRESS START 1 AND FIRE TO CLEAR SCORES.

  • Press both FIRE and 1-PLAYER START.
  • The word ERASING flashes on the screen until the entire table is erased. Wait until the word ERASING disappears before going on with other tests. To erase game times: 1.

en Push 1-PLAYER START until display reads PRESS START + AND FIRE TO CLEAR TIMES. . Press both FIRE and 1-PLAYER START. . The word ERASING flashes on the ‘screen until the entire table is erased. Wait until the word ERASING disappears before going on with other tests. To erase game scores and times:

  • Push 1-PLAYER START until display reads PRESS START 1 AND FIRE TO CLEAR TIMES AND SCORES.
  • Press both FIRE and 1-PLAYER START.
  • The word ERASING flashes on the ‘screen until the entire table is erased. Wait until the word ERASING disappears before going on with other tests.

To end the Operator Information Display, set the self-test switch to off.

1-7

Page 16

Set-Up Procedures Gravitar™

Table 1-4 Self-Test Procedure

Instruction Test Passes

  • Set the self-test switch to on. While holding the FIRE but- The screen shows the self-test display. RAMs, ROMs, and three ton down, press 1-player start.* integrated circuits are tested. If the screen is different from the self-test display, or if there are sounds, refer to Chapter 2, Self- Test Procedure. As you activate the switches, you should hear a beep and the proper 0 should change to 7. if the test fails, refer to Chapter 2, Self-Test Procedure.
  • Observe the white frame at the sides of the screen. Each frame corner should be within 14-inch of each display bezel corner. If the test fails, refer to Chapter 2, Self-Test Procedure, Screen 2.
  • Activate control panel and coin switches.

*All credits are cancelled when you enter self-test

SWITCH SWITCH ATB4 —_ SWITCH SWITCH = SWITCH AT D4 SWITCH TOGGLE 8 (Coin modes) TOGGLE 1 TOGGLE 8 (Game play) TOGGLE 1

FRAME

SELF-TEST SWITCH

FOR TECHNICIANS ONLY

SWITCH AT P10/11 RIGHT COIN (Special options) MECHANISM

LEFT COIN MECHANISM

COIN SWITCH

START SWITCH (2 player)

SHIELDTRACTOR (Player 1)

START SWITCH SHIELD/TRACTOR FIRE ROTATE RIGHT ROTATE LEFT \ THRUST (1 player) (Player 2) (Player 1) (Player 1) (Player 2) (Player 2)

FIRE ROTATE RIGHT ROTATE LEFT THRUST (Player 2) (Player 2) (Player 1) (Player 1)

Figure 1-4 Self-Test Display

Page 17

Gravitar™

G. Game Play

Gravitar™ is a one- or two-player game with a color X-Y video display. This new display, with its 3 color guns and higher voltage, has the same technology that was used in previous Atari black-and-white X-Y displays. However, the screen now displays dazzling colors and unique visual effects. The player controls a space ship in three different solar systems. Each solar system consists of a home base, a death star, a red alien planet and four regular planets. Each planet has its own unique terrain. The red alien planet is the home of shooting alien ships. Some of the regular planets may have flying alien rammers to be avoided or shot down. The four planets all have fuel cells to be retrieved with a tractor beam and alien bunkers that fire shells. Successfully destroying all of the bunkers results in a MIS- SION COMPLETE message at the top of the screen. Achieving MISSION COMPLETE allows the player to collect bonus if he can evade the rammers when leaving the planet. If successful, he will be placed back in the solar system. A player has two ways to advance to the next solar system. The first is to successfully complete a mission on all four regular planets. The second way is to complete a mission on the red alien planet, which establishes a link into the next solar system. Gravitar™ has five possible modes of operation: demonstration, attract, play, high-score, and selftest. Self-test is a special mode for checking the game switches and computer functions. You may enter self-test at any time. Wait at least ten seconds after a game has been played before entering selftest or turning off power; otherwise, you may erase the high-score table. Set-Up Procedures

  • Demonstration Mode The demonstration mode allows the operator to enter all planets to see their respective terrains and obstacles without being destroyed by shots from bunkers or alien space ships, or being hit by flying alien rammers. Enter this mode when you are in the Operator Information Display (see Figure 1-3) by simultaneously pressing all five player contro! buttons. To end this mode, set the self-test switch to oft,
  • Attract Mode The attract mode begins when power is applied to the game, after a play or high-score mode, or after self-test. This mode repeats every 30 seconds. It ends only when a credit is entered or when self-test begins. The screen displays one of four possible pictures in this mode. The first picture displays the singleplayer high-score table for approximately ten seconds. The words SCORE, FUEL, and GAME OVER appear. The words INSERT COIN and the coin mode appear if no coin(s) or not enough coins are inserted. The number of Credits may show, if any. During this time the 1-player and 2-player red light-emitting diode (LED) lights flash.

Table 1-5 Gravitar™ High-Score Lists

Depending on the highest score, one of eight list names appears above the table of initials.

Name of List Points FLUNKY 0-20,000 GUNNER 20,001-40,000 CO-PILOT 40,001-80,000 PILOT 80,001-100,000 ACE PILOT 100,001-200,000 KILLER PILOT 200,001-400,000 PONTIUS PILATE 400,001-800,000 GOTTA-BE-LUCKY above 800,000

Page 18

Set-Up Procedures

The second picture spells GRAVITAR in expanding and contracting letters. It lasts approximately nine seconds. The third picture lasts about two seconds. The screen shows a solar system with a player's blue space ship in the center at home base. All planets and their respective bonus point values are visible. ATARI MCMLXXxXII copyright message appears in the center of this picture, and the number of credits (if any). DANGER appears above the death star. The ship flies toward the easiest planet in the upper right part of the screen. The fourth picture in this mode is a full-screen view of planet terrain with the player's blue space ship appearing at the top center of the screen. The ship travels in the scrolling, zooming terrain until it crashes or is shot down. The words SHOOT BUN- KERS, TRACTOR FUEL, SCORE, FUEL, and number of credits (if any) are displayed. Game play begins when the correct credit(s) is entered and the 1- or 2-player button(s) is pressed.

  • Play Mode The play mode begins in the first solar system with the player's blue ship in the center of the screen at home base. There are four regular planets plus a fifth red alien planet and a death star arranged clockwise around the screen in increasing order of difficulty. The planets are worth 2,000, 4,000, 6,000, and 8,000 points with a value of 9,000 points on the alien planet. The positions of the alien pianet and the death star vary in the second and third solar systems. After the first solar system all planets are valued at 9,000 points. The death star, located near home base, is the center of gravity in each solar system. Colliding with it results in the loss of one life, and the player returns to home base. The words SCORE (with current total score), FUEL (running total of original 10,000-point fuel supply), and BONUS (decreasing point value of planet under attack) appear at the top of the screen throughout game play.

1-40 Gravitar™

Player controls consist of LEFT ROTATE, RIGHT ROTATE, FIRE, THRUST, and TRACTOR/SHIELD yellow pushbuttons. Use FIRE to shoot targets. A player has four shells that must hit a target or must travel their full distance in order to be reloaded. TRACTOR/SHIELD retrieves fuel with a tractor beam and shields the ship from alien shots. The TRACTOR/SHIELD does not prevent the ship from crashing into land or alien ships. TRACTOR/SHIELD and THRUST decrease the player's fuel supply. Using these controls together decreases the fuel supply even faster. Blue fuel cells are positioned just below a planet’s surface. There are two, three, or four fuel cells per planet terrain (depending on level of game play). Each cell beamed aboard ship with TRACTOR is worth 2,500 fuel units. If the player’s ship is above the highest point on some planet terrains, flying alien rammers attack him. Shooting a rammer scores 100 points. If the player gets too close to a shooting alien ship, he is involved in a one-on-one space dogfight, and either he or the alien ship must die. If the player is victorious, he returns to the solar system at his original spot; if the alien ship wins, the player loses a life and returns to home base. Red alien bunkers appear on each planet. There are two, four, six, or eight bunkers per surface (depending on the difficulty of the planet). The bunkers fire shots to protect the fuel cells. Exploding a bunker scores 250 points. Exploding all bunkers in a solar system displays a MISSION COMPLETE message. The word SUPERBONUS and the number of superbonus points appear in the middle of the screen only after a completed mission on the first planet in the first solar system. These superbonus points are awarded on the basis of initial difficulty of the first planet sucessfully completed. The higher the bonus point value of the planet attacked, the higher the superbonus awarded. No superbonus points are awarded for attacking the 2,000-point (easiest) planet or for attacking the four regular planets in consecutive order of difficulty.

Page 19

Gravitar™

Table 1-6 Gravitar™ Scoring

Planet Bonus* Superbonus** 9,000 20,000 8,000 12,000 6,000 6,000 4,000 2,000 2,000 0

Obstacles Points

Red bunker 250 Rammer 100 Alien Ship 160

*Constantly decreases with elapsed game time ** Awarded after first MISSION COMPLETE achieved

A player may fly to any planet he chooses. The number beside each planet is the starting number of bonus points for that planet. Entering a planet causes the distinct planet terrain to appear. To get maximum points, the player must shoot all alien bunkers and see MISSION COMPLETE at the top of the screen. A player may exit a planet at any time; he does not have to stay any longer than he wishes. The red alien planet (worth 9,000 points) is home for red alien ships that must be shot down or avoided. The alien planet looks the same in every solar system: terrain consists of a spiral tunnel with a reactor at its end. Under a decrementing timer, the player must maneuver through the tunnel without hitting the walls and shoot the reactor. (Hitting the wails or not escaping in time places the player back at home base.) Shooting the reactor will make it glow and pulsate. Then the player must escape before the timer reaches zero. (In the next solar systems, the timer of the alien planet decreases by two seconds, and there are shooting bunkers to overcome.) Completing the mission on the alien planet places the player in the next solar system with an additional 7,500 fue! points. Gravitar progresses by waves of planets (new solar systems). Successfully destroying the reactor and escaping from the red alien planet, or achieving Set-Up Procedures

a MISSION COMPLETE on all four regular planets places the player in the next solar system (next level of game play). The four levels of game play are described as follows: a. Regular gravity b. Negative gravity c. Regular gravity with invisible landscape and maximum difficulty . Negative gravity with invisible landscape and maximum difficulty Alien ship speed and firing frequency, rammer speed, bunker firing frequency, and bonus points are all based on time elapsed in game play. Both regular and negative gravity increase, depending on the initial planet bonus level. The game ends when ali lives are used up or when player is out of fuel. Then the screen briefly displays the words SCORE, FUEL, PLAYER 1 (or 2), GAME OVER.

  • High-Score Mode This mode begins if a player has earned one of the eight highest scores. The player has one minute to enter his initials. Letters of the alphabet increment with LEFT ROTATE and decrement with RIGHT ROTATE pushbuttons. Select letters with the TRACTOR/SHIELD pushbutton. To reset the highscore table, power the game off and then on, or enter and end the self-test mode (this does not erase the top three scores). a
  • Hints for Game Play @ Develop skill for controlling the space ship in regular and negative gravity. @ Beam up fuel cells with TRACTOR/SHIELD. @ Attack the red alien planet first for maximum challenge and 20,000 bonus points! Completion of this planet immediately places a player in the next solar system where all planets are worth 9,000 bonus points. @ Attack more difficult planets early in the game for higher bonus points. @ Many planet terrains have safe areas or “blind spots” from which the player can safely shoot at bunkers.
Page 20

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 21

Troubleshooting /

This game tests itself when the self-test switch is set to the on position. If there is a failure, the game produces audiovisual aids to help you find the failing portion of the game. The self-test procedure included in Chapter 1 will help you decide if the game is or isn’t working properly. The expanded self-test procedures in this chapter are included to help the qualified electronic technician troubleshoot the game.

Chapter

Page 22

A. Comments on Troubleshooting

When troubleshooting, first determine the symptom(s) of the failure. After determining the symptom, look over the wiring diagram and determine what assemblies could cause the failure. Could it be caused by the power supply, Regulator/Audio I! PCB, or the video display?

The next step is to check all harness wires and connectors to the suspected failing assembly. If you find no harness or connector problem, substitute an assembly known to be good for the suspected failing assembly. If the game functions properly, you have successfully isolated the failure. If it doesn’t, repeat the procedure with another assembly.

When you have isolated the failing assembly, you must troubleshoot that assembly and make the necessary repairs. If the video display is failing, we suggest that a qualified video display technician handle the troubleshooting and repair. If the power supply or Regulator/Audio II PCB is failing, troubleshooting and repair are relatively simple, as these assemblies are not too complicated. If a game PCB is failing, troubleshooting and repair depends on your understanding of the operation of the PCB.

To effectively troubleshoot a game PCB, learn as much as you can about the PCB. The diagrams in the Schematic Package (included with the game) show the functions of the circuitry. Again, while troubleshooting the PCB, first determine the symptom of the failure, then locate the suspected area on the schematic diagram.

The Schematic Package has signatures printed in red at the proper test-node points for PCB memory devices. For example, to determine if the self-test ROM is functioning properly, perform signature analysis with the ATARI® CAT Box. The Schematic Package contains a complete description of signature analysis using the CAT Box.

A glossary of schematic signal descriptions is included in the Schematic Package. Each signal description states if the signal is hardware- or softwaregenerated, where it is generated, where it goes, and what it does. We suggest you use this glossary to become more familiar with the operation of the game PCB. Gravitar™

B. Self-Test Procedure

To enter Self-Test, set the self-test switch to the on position. Press FIRE and then 1-player start. If the test passes, the screen goes blank for a few seconds and then displays the picture below See Chapter 1, Section F, Self-Test Procedure for a complete description of this picture.

Figure 2-1 Self-Test Screen 1 Test Passes

NOTE

This procedure does not test the coin door lockout coils and coin counter. If the lockout coils do not energize when the game is on, suspect the lockout coil wiring, coin door harness, game PCB harness, latch R9, or driver Q2 of the game PCB. Troubleshoot using the game schematics.

SCREEN 1: RAM failure is indicated by a sound and, if possible, an A displayed in the top center of the screen. Count the tones. One or two tones indicates RAM failure at game PCB location N/P1. Three or four tones indicate RAM failure at game PCB location K7.

Failing RAM Location

Tone on Game PCB

Ast or 2nd NIPT 3rd or 4th K7

Page 23

Gravitar™

Oo001o01101

Figure 2-2 Self-Test Screen 1 Test Fails

ROM failure is indicated by one or more vertically arranged numbers displayed on the top half of the screen (see Figure 2-2). The bad ROM and its location are listed as follows:

Failing ROM Location Screen Display on Game PCB o- 7 1 MIN7 2° NIP7 3 R7 4 01 5 E/F1 6 HI 7 v1 8 KILI g** M1 *If this ROM is bad you will hear a constant low tone, and the program may be unable to display a screen image. **If this ROM is bad, the screen may be blank.

EAROM or CUSTOM I/O CHIP failure is indicated by one letter in the top center of the sceen. Identify the failure with the table below.

Location Letter Displayed on Game PCB E EAROM at M2 Pp Custom I/O chip at C/D3 Q Custom /0 chip at B3 Troubleshooting

SWITCH failure is indicated by the associated 0 not changing to a 7 on the screen and no sound when the switch is activated. Troubleshoot using the information in Chapter 3, Section B, and game schematics. SOUND failure is indicated by no sound. Check the volume contro! levels on the utility panel, or troubleshoot using the game schematics. To see the remaining self-test screens (2 through 8), press the coin switch on the utility panel for each screen.

SZ o-< 4

LSZ7SZSZ7™

Figure 2-3 Self-Test Screen 2

SCREEN 2: A white diagonal grid pattern and a complete character set appear on the screen (see Figure 2-3). The edges of the grid pattern should touch the sides of the screen. If the display is not centered, symmetrical, or the proper size, adjust the X SIZE, Y SIZE, X CTR, Y CTR, X LIN, OR Y LIN pots on the game PCB (refer to the Schematic Package). If the characters are incorrect, check again for a 2 displayed in the preceding ROM failure test.

Page 24

Troubleshooting

Figure 2-4 Self-Test Screen 3

SCREEN 3: A white box of decreasing size appears during this test. The box should shrink smoothly. There are seven stages, each with a tone. This pattern tests the binary and linear scaling circuitry. Troubleshoot using the game schematics. Gravitar™

RED (A) ROYAL BLUE (8) GREEN (G)

WHITE (RGB) —>

YELLOW (RG) LIGHT BLUE (GB) LAVENDER (RB)

Figure 2-6 Self-Test Screen 5

SCREEN 5: This test checks the seven screen colors and six intensities of each color (see Figure 2-6). If the intensities do not progress from dim at the top of each color group to bright at the bottom, there is a problem in the Z-axis of the game PCB or the video display. Use this pattern for tracking adjustments (refer to the color X-Y display manual).

Figure 2-5 Self-Test Screen 4

SCREEN 4: A series of horizontal lines are visible in the middle of the screen. This is a raster test, used by the manufacturer only, to set the color levels.

2-4 Figure 2-7 Self-Test Screen 6

SCREEN 6: A grid pattern touches the corners of the video display (see Figure 2-7). Press the 1-player start button to change colors. Use this pattern for purity and convergence adjustments (refer to the color X-Y display manual).

Page 25

Gravitar™

The diagnostic program is activated by switches 2, 3, and 4 in the 4-toggle option switch bank at location P10/11 on the game PCB. This group of switches lets you choose one of six tests.

Test

Test 1 Test 2

Test 3

Test 4

Test 5

Test 6 Troubleshooting

VECTOR-GENERATOR DIAGNOSTIC PROGRAM

Action

Strobes WDDIS every 4 msec (blank screen) Tests vector-generator halt instruction every .55 msec (blank screen) Tests vector-generator long vector (and halt instruction) every 8.2 msec Tests vector-generator jump instruction (and long vector and halt instructiion) every 8,2 msec

Tests vector-generator short vector instruction (and all of Test 4) every 8.6 msec Tests vector-generator JSRL/RTSL instruction (and all of Test 5) every 10.2 msec These tests automatically provide recurring sequences to make it easy for you to troubleshoot the vector-generator circuitry. The tests and their respective option switch settings are as follows:

Settings of 4-Position DIP ‘Switch at P10/11 4 3 2

Off Off Off On Off Off Off On Off

On On Off

Off Off On On Off On

Figure 2-8 Screen 7 —Self-Test Screens During Diagnostic Program

Press the coin switch while pressing the 2-player start button. The screen will either be blank or display vectors, depending on settings of the switch toggles at location P10/11 on the game PCB (see Figure 2-8). To exit from this screen, set the self-test switch to off or press RESET on the game PCB.

Page 26

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 27

Maintenance, Repair

and Parts

This chapter details maintenance and repair information and provides information you need to order parts for your Gravitar™ game. Please note that common hardware has been deleted from most of the parts lists. Common hardware includes screws, nuts, washers, bolts, and the like. The parts lists are arranged in alphanumeric order. For example, all A- prefix numbers come first. Following these are numbers in sequence evaluated up to the hyphen, namely 00- thru 99-, then 000598- thru approximately 190000-. When ordering parts, please give the part number, part name, applicable figure number of this manual, and serial number of your game. This will help to avoid confusion and mistakes in your order. We hope the results will be less downtime and more profit from your game. Atari Customer Service numbers are listed in the front of this manual for your convenience.

Page 28

Maintenance, Repair and Parts Gravitar™

A. Cabinet-Mounted Assemblies

Fluor. Tube & Speaker Assy. 178034024 see Figure 3-4 (Tmolding) 037222.01 (Vent. grille) A038164-01 (Cabinet assy.)

78-6900402 (Tape) {Fane} 71-2110

037419-02 A038590-01 (Access panel) Video Display see Figure 35

178013-001 (Latch)

Game PCB Assy. Control Panel Assy. see Figures 3-7 & 3-8 see Figures 3-2 & 3-3

a A038586-01 037308-01 (Main harn. assy.) (Speaker grille) 148001-017 (Speaker) Regulator/ Audio II PCB Assy. see Figures 3-7 & 3-9

(A038588-01 Coin Door Assy. (Power harn. assy.) see Figure 36

A037453-03, nei ‘ ‘03745403, (Volume/self-test harn.) ‘A037455-03, or A002465-01 Power Supply Assy. poarreaa (Coin counter) see Figure 3-10 178048-001 A037470-01 19-9032 (Caster) _—_(On/off switch assy) (Volume control) 009992-01 178070-001 (On/off switch cover) (Volume contro! knob) 62-041 (Utility coin switch) 69-001 (Self-test switch) Figure 3-1 Cabinet-Mounted Assemblies 038003-01 Upright Cabinet (Bracket) | A038169-01 &-02 A 78-3201 (Glide)

3-2

Page 29

Gravitar™ Maintenance, Repair and Parts

Figure 3-1 Cabinet-Mounted Assemblies, continued Upright Cabinet Parts List

Part No. Description (Reference Designations and Locations in Bold) A002465-01 Coin Counter

A037453-03Strain-Relief Power Cord(U.S. and Canada)
A037455-03Strain-Relief Power Cord(Australia and New Zealand)

A037470-01 Power On/Off Switch/Mounting Plate Assembly

A037784-03Strain-Relief Power Cord(United Kingdom, Ireland, Lebanon, Saudi Arabia, India, Hong Kong,

Singapore, Egypt, Nigeria, Republic of South Africa, Zimbabwe) A038004-01 Harness for Volume Control/Self-Test Switch/Coin Counter Assembly

A038164-01Cabinet Assembly(includes glides and PCB retainers, but not the rear access panel)

A038586-01 Main Harness Assembly A038588-01 Power Harness Assembly A038590-01 19-Inch Welis-Gardner Color X-Y Video Display Assembly The following four items are the technical information supplements to this game: ‘SP-206 Gravitar Schematic Package ‘ST-206-01 Gravitar Label with Self-Test Procedure and Option Switch Settings TM-183 Service Manual for 19-Inch Wells-Gardner Color X-Y Display TM-206 Gravitar Operation, Maintenance, and Service Manual 19-9032 Volume Control 62-041 SPDT Momentary-Contact Pushbutton Utility Coin Switch with Black Cap 69-001 DPDT Self-Test Switch

71-2110Lock Mechanism(for rear access panel)

78-3201 Adjustable Glide 78-6900402 Vinyl Foam Single-Coated Adhesive Tape, %-Inch Wide x %Inch Thick 009992-01 On/Off Switch Cover 037308-01 Speaker Grille 037332-01 Ventilation Grille 037419-02 Rear Access Panel _ (does not include lock) 038003-01 Bracket for Volume Control, Self-Test Switch, and Coin Counter(s)

038091-01Molded Coin BoxAcceptable substitute is part no. A037497-01

178013-001 Spring Draw Latch 178034-024 ¥-Inch Black Plastic TMolding 178048-001 2-Inch Rigid Caster 178070-001 Volume Control Knob

Page 30

Maintenance, Repair and Parts Gravitar™

03822601 Fluor. Tube & Speaker Assy. A038744-01 or -02 08733201 (Upper cabinet grille) see Figure 3-4 (Cabinet assy) (Went, grite)

178034024 (T-molding)

038754-01 (Shield with graphics) 03772102 (Access panel)

Video Display see Figure 3-5 71-2110 k) 78-6900402 (Lock) (Tape) Control Pane! Assy. 178013-001 see Figures 3-2 & 3-3 (Latch)

‘A038590-01 (Video display)

: Game PCB Assy. Coin Door Assy. ) see Figures 3-7 & 3:8 see Figure 36

A038829-01 (Main harn. assy.)

Regulator/Audio II PCB Assy. A038831-01 see Figures 3-7 & 3-8 (Power harn. assy)

78-3201 (Glide)

178048-001 (Caster)

038003-01 Bracket)

178070-001 (Vol. control knob)

A002465-01 (Coin counter)

A038004-01 (Vol./self-test harn.)

69-001 (Self-test sw.) 19-9032 (Vol. Control) 62-041 (Utility Coin Sw.) Power Supply Assy. see Figure 3-10

A037470-01 (On/off sw. assy.) A037454-03 or 009992-01 poo (Power cord) (On/otf sw. cover) (Power word)

Figure 3-1 Cabinet-Mounted Assemblies Ireland-Built Cabinet A038740-01 & 02 A

Page 31

Gravitar™ Maintenance, Repair and Parts

Figure 3-1 Cabinet-Mounted Assemblies, continued Ireland-Built Cabinet Parts List

Part No. Description (Reference Designations and Locations in Bold) A002465-01 Coin Counter A037454-03 Strain-Relief Power Cord (Austria, Belgium, Chile, Denmark, Finland, France, Germany, Greece, Indonesia, Italy, Netherlands, Norway, Spain, Sweden, and Uruguay) A037784-03 Strain-Relief Power Cord (United Kingdom, Ireland, Lebanon, Saudi Arabia, India, Hong Kong, Singapore, Egypt, Nigeria, Republic of South Africa, Zimbabwe) A038004-01 Harness for Volume Control/Self-Test Switch/Coin Counter Assembly A038741-01 Cabinet Assembly (includes wood-grained side panels, glides and PCB retainers, but not the rear access panel) A038741-02 Cabinet Assembly (includes graphics on white side panels, glides and PCB retainers, but not the rear access panel) A038829-01 Main Harness Assembly A038831-07 Power Harness Assembly The following four items are the technical information supplements to this game: SP-206 Gravitar™ Schematic Package ST-206-01 Gravitar Label with Self-Test Procedure and Option Switch Settings TM-183 Service Manual for 19-Inch Wells-Gardner Color X-Y Display TM-206 Gravitar Operation, Maintenance, and Service Manual 19-9032 Volume Control 62-041 SPDT Momentary-Contact Pushbutton Utility Coin Switch with Black Cap 69-001 DPDT Self-Test Switch 71-2110 Cam Lock (for rear access panel) 78-3201 Adjustable Glide 78-6900402 Vinyl Foam Single-Coated Adhesive Tape, %4-Inch Wide x %¢Inch Thick 009992-01 On/Off Switch Cover 037332-01 Ventilation Grille (located on cabinet top) 037721-02 Rear Access Panel (does not include lock) 038003-01 Utility Switch Bracket for Volume Control, Self-Test Switch, and Coin Counter(s) 038754-01 Video Display Shield with Graphics 038226-01 Upper Cabinet Grille 178013-001 Spring Draw Latch 178034-024 %-Inch Black Plastic T-Molding 178048-001 2-Inch Rigid Caster 178070-001 Volume Control Knob

3-5

Page 32

Maintenance, Repair and Parts

B. The Control Panel

WARNING Before removing or repairing any switch on the control panel, unplug the game.

To Open the Control Panel:

  • Open the coin door. Reach up through the opening to the top of the control panel and release the springdraw latches.
  • Close the coin door.
  • Lift up on the contro! panel at the top edge and tilt it toward you. There is foam tape on the display shield, which cushions the shield and prevents liquids from entering the cabinet interior. Make sure this tape is in good condition.

To Repair Leaf Switches:

  • Adjust the leaf switches for a narrow gap. When a switch button is depressed, the resulting wiping action of the cross-bar contacts provides a self-cleaning feature. Don’t burnish the contacts. To clean them, use electrical contact cleaner.
  • To replace a leaf switch, remove the screw with a Phillips-head screwdriver.

Figure 3-2 Gravitar™

  • To replace the switch button, turn the stamped nut with a wrench in a counterclockwise direction as seen from inside the control panel. The ring on the outside of the control panel should not spin.
  • To reinstall the switch, reconnect the harness wires as shown in the Schematic Package, Game Wiring Diagram. Make certain the colored wires are routed to their matching colored tabs on the switch. To Repair LED Start Switches: These switches have a very low failure rate. If a switch should ever be suspect, first test it using the following directions.

To Test LED Switch: |. Remove the wires from the suspected switch.

  • Attach the leads of an ohmmeter to normally open and common contacts.
  • Check contacts (push and release the switch button) for closed and open continuity.
  • If the contacts do not operate sharply or always remain closed or open, replace the switch.

To Replace LED Switch:

  • Remove all wires from the faulty switch.
  • Turn the switch counterclockwise while holding the black cone-shaped bushing on the outside of the control panel.
  • Install a new switch using the reverse procedure. 4, Reconnect the harness wires as shown in Figure 3-2.

1 PLAYER START

VIOLET

RED(+) Lz GREY NORMALLY OPEN BLACK (N.0.) CONTACT COMMON CONTACT

2 PLAYER START WHITE/BLACK —rT |

RED( ok Nw BROWN

NORMALLY OPEN (N.0.) CONTACT

Controi Panei

Page 33

Gravitar™ Maintenance, Repair and Parts

A038175-01

WARNING | (Control panei/decal) Piayers may receive an electric shock if this 03817301 control panel is not properly grounded! After (Control panel) servicing any parts on the panel, check that 036174-04 the ground wire is firmly attached to the metal (Deca!—not shown) tab on the inside of the control panel. Only i then should you lock up the game. (A038751-01 (Control panel/decal) 038753-01 78-6900402 + (Control panel) (Tape) 038752-04 (Decal—-not shown)

62-039 (LED switch)

A038589-01 (Harness) 178030-007 a 03883201 (Yellow button) (Harness)

160013-001 (Leat switch/button holder) Cvtes)

Figure 3-3 Control Panel Assembly Upright Cabinet A038176-01 A lreland-Built Cabinet A038750-01 A Parts List

Part No. Description (Reference Designations and Locations in Bold)

Upright Cabinet A038175-01 Control Panel with Decal A038589-01 Contro! Panel Harness Assembly 038173-01 Control Panel 03817404 Control Panel Decal Iretand-Built Cabinet A038751-01 Control Panel with Decal A038832-01 Control Panel Harness Assembly 78-6900402 Vinyl Foam Single-Coated Adhesive Tape, “%-Inch Wide x Inch Thick (24 in. required) 038753-01 Control Panel 038752-04 Control Panel Decal Upright and Ireland-Built Cabinets 62-039 SPDT Momentary Pushbutton Start Switch with Red Light-Emitting Diode 75-9910NO #911 Steel Stamped Nut 036895:01 Black Molded Switch Bezel 160013-001 Leaf Switch and Button Holder (leaf switch only is part no. 160012-001) 178030-007 Yeilow Pushbutton Assembly

3-7

Page 34

Maintenance, Repair and Parts Gravitar™

C. Fluorescent Tube and Speaker

WARNING Before removing or repairing the fluorescent tube or speaker, unplug the game.

If you drop a fluorescent tube and it breaks, it will implode! Shattered glass can fly six feet or more from the implosion. Use care when replacing any fluorescent tube.

To Replace Fluorescent Tube:

  • Remove the three sets of hardware that secure the upper attraction panel retainer to the cabinet. Loosen the three sets of hardware that secure the lower retainer to the cabinet. Lift the attraction panel up and out of its lower retainer.
  • Remove the cardboard locking tab at each end of the tube. Slightly rotate the tube up or down and carefully remove it from the lampholders.
  • Replace with a new tube. Do not snap the tube in vigorously—you may break it, causing an implosion! Replace the locking tabs.
  • Check that the green ground wire is securely attached to the large metal bracket and the ballast transformer on the wood panel. If the tube is not grounded, it may not start.

To Replace Cabinet Speakers:

  • Upper speaker. Remove upper attraction glass. Slide the fluorescent tube and speaker board partially out of the cabinet. Turn it sideways to unplug the 5-pin harness connector. Remove the board from the cabinet.
  • Unplug the two plug-in connectors on the speaker.
Note that the white wire (+) connects on the side marked with a painted dot. Remove the hardware that attaches the speaker to the board. Replace the speaker, reinstall the speaker board, and reconnect the harness.
  • Lower speaker. Open the rear access panel. Unplug the two plug-in connectors on the speaker. Note that the white wire (+) connects on the side marked witha painted dot. Remove the hardware that attaches the speaker to the cabinet. Install the new speaker, and replace the hardware and connectors.

037309-01 (Top retainer)

179035-001 (Lampholder)

99-11003 (Starter) 99-11009 (Socket)

038177-01 (Attraction glass) 78-6900402 (Tape)

037304-01 (Bottom retainer) 148001-017 bas". (Speaker) Disassemble in the order indicated. (Circled numbers match the 79-561816P numbered instructions.) (Wire nut)

038151.01 (Jumper wire)

142028-xxx (Transformer)

‘037457-01 (Harness) ©)

037469-01 (Bracket) @ A037540-01 (Ground wire) 99-11006 (Tab) NOTE

To ensure that the fluorescent tube 70-304 Starts, make sure the ground wire is firm- (Tube) ly attached to both the ballast transformer and the steel lamp bracket.

Figure 3-4 Fluorescent Tube and Speaker Upright Cabinet A038161-01 & -02 A

Page 35

Gravitar™ Maintenance, Repair and Parts

Figure 3-4 Fluorescent Tube and Speaker, continued Upright Cabinet Parts List

Part No. Description (Reference Designations and Locations in Bold) A037457-01 Tube and Speaker Harness Assembly A037540-01 Ground Wire with Ring Lug 70-304 18-Inch, 15-W, Cooi White Fluorescent Tube 78-6900402 Vinyl Foam Single-Coated Adhesive Tape, %-inch Wide x j, inch Thick 79-561816P Spring-Connector Wire Nut for 16- to 18-Gauge Wires 99-11003 Fluorescent Lamp Starter

99-11006Fluorescent Lamp Locking Tabtab consists of two pieces)

99-11009 Starter Socket 037304-01 Bottom Attraction Glass Retainer 037309-01 Top Attraction Glass Retainer 038151-01 15-Inch Jumper Wire 038177-01 Attraction Glass with Graphics 037469-01 Stee! Lamp Bracket

142028-00160 Hz, 118 V, Ballast Transformer(used on A038161-01 assembly)
142028-00250 Hz, 118 V, Ballast Transformer(used on A038161-02 assembly)

148001-017 6 x 9-Inch, 8 2, 6-Ounce Oval Shielded High-Fidelity Speaker 179035-001 2-Pin Fluorescent Lampholder

Page 36

Maintenance, Repair and Parts

Before removing or repairing the fluorescent tube or speaker, unplug the game.

If you drop a fluorescent tube and it breaks, it will implode! Shattered glass can fly six feet or more from the implosion. Use care when replacing any fluorescent tube.

Ireland-Built Cabinet 4B To Remove the Tube and Speaker Board:

  • Unlock and open the rear access pane'. Unplug the tube and speaker 5-pin harness connector.
  • Open the control panel (see Figure 3-2, Control Panel).
  • Remove the five button-head screws that secure the upper cabinet grille to the top front of the cabinet. Lift the grille up and away from the cabinet. Be careful that the glass display shield does not fall forward.
  • Lift the video display shield up and out of the cabinet.
  • Slide the baffle board that is below the fluorescent tube out the front of the cabinet.

Disassemble in the order indicated. (Circled numbers match the numbered instructions.) Gravitar™

  • Remove the screws that secure the tube and speaker board to the cabinet. Slide this board up and out of the cabinet.

To Change the Fluorescent Tube:

  • Remove the Y-lead connectors at each end of the fluorescent tube.
  • Slightly rotate the tube, and carefully remove it from the clamps on both ends. Put in a new tube. Do not snap the tube in vigorously—you may break it, causing an implosion! Put back the Y-\ead connectors. Reinstall the tube and speaker board, baffle board, shield, and grille. Connect the harness. Close and lock the control panel and the rear access panel.

To Change the Speaker:

  • Unplug the two plug-in connectors on the back of the speaker.
  • Remove the hardware that attaches the speaker to the board. Put in a new speaker. Put back the hardware and two plug-in connectors. Reinstall the tube and speaker board, baffle board, shield, and grille. Connect the harness. Close and lock the control panel and the rear access panel.

038226-01 (Grille)

038217-01 (Baffle Board)

038754-01 (Shield with graphics)

Figure 3-4 Fluorescent Tube and Speaker, continued Ireland-Built Cabinet

3-10

Page 37

Gravitar™ Maintenance, Repair and Parts

148001-001 038219-03 (Speaker) (Tube & speaker board)

99-1103 (Starter)

99-1109 (Socket)

Disassemble in the order indicated. (Circled numbers match the numbered instructions.) 035835-01 (Connector)

NOTE To ensure that the fluorescent tube starts, make sure the ground wire is firmly attached to 99-11012 the transformer. (Clamp)

Figure 3-4 Fluorescent Tube and Speaker, continued Ireland-Built Cabinet A038228-01 A Parts List

Part No. Description (Reference Designations and Locations in Bold) A037457-01 Tube and Speaker Harness. A037540-01 Ground Wire with Ring Lug 70-303 18-Inch Length by I-Inch Diameter, 15 W Cool White Fluorescent Tube 99-11003 Fluorescent Lamp Starter 99-11009 Starter Socket 99-11012 1%;Inch Fluorescent Tube Clamp 035835-01 12-Inch Y-Lead Connector 038151-01 Jumper Wire 038217-01 Baffle Board 038219-03 Tube and Speaker Board 038226-01 Cabinet Grille 038754-01 Display Shield with Graphics 142028-002 50 Hz, 118 V Ballast Transformer 148001-001 6 x 9-Inch, 4-2, 15 W Oval High-Fidelity Speaker

Page 38

Maintenance, Repair and Parts

D. Video Display

WARNING

SHOCK HAZARD The following procedure should only be performed by a qualified service technician. Before removing or repairing the video display, unplug the game. As an extra precaution, we highly recommend you discharge the high voltage from the picture tube. High voltages may exist in any video display, even with power disconnected. Use extreme

caution and do not touch electrical parts of the display yoke area with your hands or with metal objects in your hands! IMPLOSION HAZARD If you drop the display and the picture tube breaks, it will implode! Shattered glass and the yoke can fly six feet or more from the implosion. Use care when replacing any display. Gravitar™

Your game may have either an Amplifone or a Wells- Gardner 19-inch color X-Y display. Use the following procedures to remove and reinstall your display.

To Remove the Wells-Gardner Color X-Y Display: Open the rear access panel and unplug the 15-pin display harness connector. Remove the hardware that secures the display chassis to the metal bracket. Open the control panel (see Figure 3-2). For the /reland-Built cabinet, remove the five butten-head screws that secure the upper cabinet grille to the cabinet (see Figure 3-4). Then lift the grille up and away from the cabinet. Lift the glass shield. Slide the retainer clip off the wood cleat and remove the clip through the cutout. Now remove the glass shield by sliding it down and out of the cabinet. For the /reland-Built cabinet, lift the video display shield up and out of the cabinet. Remove the cardboard bezel. Remove the four sets of hardware that secure the display chassis to the wood shelf. Carefully pull the display out through the front of the cabinet. Place it on a soft mat in a protected location. After servicing the display, reinstall it in reverse order.

037322-01 (Bezel)

037303-01 (Shiela) @

92-053

037330-01

  • (Retainer clip) A038593-01 (Display interconnect assy)

© (Wells-Gardner Display) 038181-01 @ (Bracket)

Figure 3-5 Video Display (Wells-Gardner) Upright Cabinet

3-12

Page 39

Gravitar™ Maintenance, Repair and Parts

Figure 3-5 Video Display (Wells-Gardner), continued Parts List

Part No. Description (Reference Designations and Locations in Bold) Upright Cabinet A038593-07 Wells-Gardner Interconnect Assembly 92-053 19-Inch Wells-Gardner Color X-Y CRT 038181-01 Video Display Support Bracket 037303-01 Display Shield 037322.01 Display Bezel 037330-01 Display Shield Retainer Clip

ireland-Built Cabinet A038829-01 Main Harness Assembly 92-053 19-Inch Wells-Gardner Color X-Y CRT 038226-01 Upper Cabinet Grille 038754-01 Display Shield with Graphics 038758-01 Display Bezel 038759-01 Video Display Support Bracket

038226-01 ® oper cabinet grille

92-053 (G) (Wells-Gardner Display}

038754-01 (Shield with graphics)

038759-01 (Bracket) 03875801 (Bezel)

BACK OF DISPLAY

Figure 3-5 Video Display (Wells-Gardner), continued lreland-Built Cabinet

3-13

Page 40

Maintenance, Repair and Parts

A— warnine

SHOCK HAZARD The following procedure should only be performed by a qualified service technician. Before removing or repairing the video display, unplug the game. As an extra precaution, we highly recommend you discharge the high voltage from the picture tube. High voltages may exist in any video display, even with power disconnected. Use extreme

caution and do not touch electrical parts of the display yoke area with your hands or with metal objects in your hands!

IMPLOSION HAZARD

If you drop the display and the picture tube breaks, it will implode! Shattered glass and the yoke can fly six feet or more from the implosion. Use care when replacing any display.

To Remove the Deflection PCB:

  • Unplug the four connectors from the Deflection PCB.
  • Remove the Phillips-head screw that secures the Deflection PCB to the game cabinet.
  • Slide the Deflection PCB from the wood cleats. 4, To install the Deflection PCB, reverse the order of this Procedure.
Note Amplifone CRT (A201001-01) and Deflection PCB (A201014-01) are shipped as a matched, calibrated pair and should be used as such.

To Remove the High-Voltage PCB:

  • Discharge the high voltage from the CRT (refer to TM-194, the Amplifone 19-Inch Color X-Y Display manual.)
  • Carefully remove the high-voltage anode connector from the CRT. Unplug the socket from the rear of the CRT. Unplug the 9-pin connector from the Deflection PCB. Unplug the 2-pin connector from the DAG spring. Remove the Phillips-head screws that secure the High-Voltage PCB and two harnesses to the game cabinet. Slide the High-Voltage PCB from the wood cleats. To install a High-Voltage PCB, reverse the order of this Procedure. 2rae

Qn

3-14 Gravitar™

The Amplifone Color X-Y Display assembly consists of the following three assemblies: ¢ 19-inch Amplifone cathode-ray tube (CRT)

  • Deflection printed-circuit board (PCB) calibrated to match the CRT *¢ High-Voltage PCB (To adjust FOCUS and BRIGHT- NESS controls, refer to TM-194, the Amplifone 19-Inch Color X-Y Display manual.)

038184-01 NT shield)

034536-01 (Foam pad-not shown)

(Deflection PCB)

Figure 3-5 Video Display, continued Amplifone Deflection PCB Removal

A201012-01 038184-01 (J) (High-Voltage PCB) —(Static shield)

Figure 3-5 Video Display, continued Amplifone High-Voltage PCB Removal

Page 41

Gravitar™

To Remove the CRT: 1. Open the rear access panel. Maintenance, Repair and Parts

. t Ne Game, oper the control i

2.Disconnect the 15-pin display harness connector8ay pnd thegame, open the control, panei

ired to the Deflection PCB. ,

wr’10. Lift the glass shield. Slide the retainer clip off the
3.Discharge the high voltage from the CRT (refer towood cleat and remove the clip through the cutout.

TM-194, the Amplifone 19nch Color X-Y Display Remove the glass shield by sliding it down and out of manual) the cabinet.

4.Carefully remove the high-voltage anode connector41.Remove the cardboard bezel.

from the CRT. ”

  • Remove the four sets of hardware that secure the CRT
5.Unplug the socket from the rear of the CRT.to the wood frame.
6.Unplug the degaussing coil 2-pin connector from the13. Carefully remove the CRT by easing it out of the front

Deflection PCB. of the game. Place it on a soft mat in a protected loca-

7.Unplug the 5-pin connector from the Deflection PCB.tion.
8.Unplug the 2-pin connector to the DAG spring that14. To install an Amplifone CRT, reverse the order of this

runs across the back of the CRT. procedure.

A201001-01 ® (Amplifone CRT)

Qo) 937303-01 037322-01 (Shield) (Bezel)

Figure 3-5 Video Display (Amplifone), continued Upright Cabinet Parts List

Part No. Description (Reference Designations and Locations in Bold)

Amplifone Display Assembly A200000-01 A201001-01 19nch Amplifone Color X-Y CRT A201012-01 High-Voltage PCB A201014-01 Deflection PCB 034536-02 Foam Pad (used with High-Voliage and Deflection PCBs) 037303-01 Display Shield 037322-01 Display Bezel 037330-01 Display Shield Retainer Clip 038184-01 Static Shield

3-15

Page 42

Maintenance, Repair and Parts Gravitar™

E. Coin Door

470000-001 (Lamp) a 179047-001 ~ “9915023 (Lamp Base) (Base Plate)

Loh

99-15056 J 99-15026 (Screw for Bezel) Coin Inet)

99-15025 “2 - (Coin iniet)

PART OF 99-15069 a 27 9915054 (Pivot for Lever) 2 99-15068 om (Lockout Coil) 99.45069 ia (Lockout <_ Coil Spring)

N 99-15055 (Retaining Screw) 99-15030 —— (Lockout Flap) . NS

75.9148 (Hex Nut) (HexNU) 76.056

(Lock Wash.)

(Sw. Cover)

99-1504; (Switch)

7214148 (Screw)

Figure 3-6 Vertically Mounted Coin Door A037619-xx D

3-16

Page 43

Gravitar™

A037542.01 (Harness—not shown)

99-15063, (Screw) ™ =

99-15067 (Lock Assy.)

03809101 (Coin Box)

(Door Frame)

99-15073 99-15070 99-15067 (Lock Assy.

(Upper Door) | (Doors and Frame) 99-15074 (Lower Door)

A037619-01 — U.S. 25¢/25¢ Coin Door ‘A037619-02 — U.S. 50¢/50¢ Coin Door ‘A037619-03 — Canadian 25¢/25¢ Coin Door A037619-04 — British 10 P/10 P Coin Door ‘A037619-05 — British 10 P/50 P Coin Door ‘A037619-06 — British 20 P/50 P Coin Door ‘A037619-07 — Australian 20¢/20¢ Coin Door A037619-08 — German 1 DM/1 DM Coin Door ‘A037619-09 — German 2 DM/1 DM Coin Door ‘A037619-10 — German 2 DM/5 DM Coin Door ‘A037619-11 — German 1 DM/5 DM Coin Door A037619-12 — 5 Fri5 Fr Coin Door A037619-13 — Swiss 1 Frl1 Fr Coin Door ‘A037619-14 — French 1 Frit Fr Coin Door 99-15036 Maintenance, Repair and Parts

9915038 (Bezel for Button)

99-15001 thru 99-15011 (Return Button)

99-15071 (Clamp)

99-15039 (Bezel for Cover)

(Cover)

99-15066 (Screw)

A037619-15 — French 2 Frit Fr Coin Door ‘A037619-16 — Swedish 1 Kr/1 Kr Coin Door A037619-17 — Spanish 25 Pts/25 Pts Coin Door ‘A037619-18 — Italian 100 L/100 L Coin Door ‘A037619-19 — Hong Kong $1/Si Coin Door ‘A037619-20 — Japanese 100Y/100Y Coin Door

Figure 3-6 Vertically Mounted Coin Door, continued A037619-xx D

3-17

Page 44

Maintenance, Repair and Parts Gravitar™

Figure 3-6 Vertically Mounted Coin Door, continued Parts List

Part No. Description A037542-01 Harness Assembly 72-1414S #4-40 x %Inch Cross-Recessed Pan-Head Steel Machine Screw 75-056 #6 InternalTooth Zinc-Plated Steel Lock Washer 75.9148 #4-40 Steel Machine Hex Nut 75-3414S #4-40 x %-Inch 82° Cross-Recessed Flat-Head Steel Machine Screw 99-15001 Coin Return Button with U.S. 25¢ Price Plate 99-15002 Coin Retum Button with U.S. $1 Price Plate 99-15003 Coin Return Button with German 1 DM Price Plate 99-15004 Coin Return Button with German 2 DM Price Plate 99-15005 Coin Return Button with German 5 DM Price Plate 99-15006 Coin Return Button with Belgian 5 Fr Price Plate 99-15007 Coin Return Button with French 1 Fr Price Plate 99-15008 Coin Return Button with Japanese 100 Yen Price Plate 99-15009 Coin Return Button with British 10 Pence Price Piate 99-15010 Coin Return Button with Australian 20¢ Price Plate 99-15011 Coin Return Button with Italian 100 Lire Price Plate 99-15023 Base Plate 99-15025 Left Haif of Coin Inlet 99-15026 Right Haif of Coin Inlet 99-15027 Side Plate of Coin Return Box 99-15028 Base Plate of Coin Return Box 99-15029 Switch Bracket 99-15030 Flap for Lockout Coil (U.S. 25¢) 99-15036 Metal Coin Return Cover 99-15038 Bezel for Coin Return Button 99-15039 Metal Bezel for Coin Return Cover 99-15040 Coin Return Lever 99-15042 Coin Switch for U.S. 25¢ 99-15052 Spring for Coin Return Button 99-15054 Pivot for Coin Return Lever 99-15055 Retaining Screw 99-15056 #4-40 x ¥,-Inch Cross-Recessed Pan-Head Steel Machine Screw 99-15060 Switch Cover 99-15063 Screw for Hinge 99-15066 Screw tor Clamp 99-15067, Lock Assembly 99-15068 Lockout Coil 99-15069 Spring for Lockout Coil 99-15070 Doors and Frame 99-15071 Clamp for Frame 99-15072 Door Frame 99-15073 Upper Door 99-15074 Lower Door 99-15075 Switch Adjuster 038091-01 Coin Box (Not included in assembly) Acceptable substitute is part number A037491-01 170000-001 6.3V Miniature Wedge-Base Incandescent Lamp 171006-035 Metal Coin Mechanism 179047-001 Lamp Base

3:18

Page 45

Gravitar™

F. Printed-Circuit Boards

A— WARNING Before removing or repairing any printedcircuit board, unplug the game.

To Remove Printed-Circuit Boards:

  • Open the rear access panel.
  • For the game PCB, unplug the two edge connectors. Remove the screw and spacers that secure the PCB to the cabinet. Carefully slide the PCB straight out of its slots. Be careful not to twist the board, as this may loosen connections or components, Replace or repair as required.
  • For the Regulator/Audio !I PCB, disconnect the five small harness Connectors on this board. Maintenance, Repair and Parts

Remove the screw and spacers that secure the Regulator/Audio || PCB to the cabinet, and carefully remove the board from its slot. Do not twist the board, as this may loosen connections or components. Replace or repair as required and reinstall. Make sure that the connectors on the PCB are properly plugged in. Note that they are keyed to fit only one way. If they do not slip on easily, do not force them. A reversed connector may damage your game and void the warranty. Replace the hardware that secures the Regulator/Audio || PCB to the cabinet wall. Reinstall the plug-in connectors to the PCB. Close and lock the rear access panel. Ensure that the operation of the game is correct by performing the self-test. Performing self-test is very

important when you repair a PCB,

034536-01 (Foam pad)

72-6810S (Screw) 175004-706 {Spacer} 175004-708 (Spacer) 72-6810S i (Screw) 72-6610S (Screw) 175004-706 i (Spacer) 175004-708 (Spacer)

03453602 (Foam pad)

  • 4038398-21 or -22 (Game PCB)

A035435-04 (Regulator! Audio 1 PCB)

034536-02 (Foam pad)

Figure 3-7 Printed-Circuit Board Removal

3419

Page 46

Maintenance, Repair and Parts Gravitar™

LJ LS LJ

Glas Wasi a is

on

ile

Os

Figure 3-8 Gravitar” Game PCB Assembly A038398-21 &-22 BB

3-20

Page 47

Gravitar™ Maintenance, Repair and Parts

. ™ . Figure 3-8 Gravitar Game PCB Assembly, continued Parts List

Part No. Description (Reference Designations and Locations in Bold) For A038398-21 Version Only 27-102182 0.0018 uF, + 10%, 1 kV Radial-Lead Ceramic-Disc Capacitor (C79) 110000-103 10 kQ, +5%, Ys W Resistor (R86, 92, 93) 122002-104 0.1 uF, 50 V, Ceramic-Disc Radial-Lead Capacitor (C67, 69, 74, 75) 137160-003 10-Bit Digital-to-Analog Converter (C9, E9) For A038398-22 Version Only

21-1011030.01 uF, + 10%, 100 V, Radial-Lead Epoxy-Dipped Capacitor(C77)
27-1021820.0018 uF, + 10%, 1 kV, Ceramic-Disc Radial-Lead Capacitor(C65)

110000-681 680 2, + 5%, % W Resistor (R83) 110000-821 820 2, +5%, V4 W Resistor (R84, 94, 95) 122002-104 0.1 pF, 50 V, Ceramic-Disc Radial-Lead Capacitor (C64, 66, 76, 78) 137158-002 12-Bit Digital-to-Analog Converter (A/B9, F9) For A038398-21 & -22 Versions 21-101153 0.015 wF, + 10%, 100 V Radial-Lead Epoxy-Dipped Mylar Capacitor (C31, 32) 24-250226 22 uF, 25 V Electrolytic Fixed Axial-Lead Capacitor (C111, 121) 24-350107 100 uF, 35 V Aluminum Electrolytic Fixed Axial-Lead Capacitor (C117, 119, 120)

24-50010610 uF, 50 V Aluminum Electrolytic Fixed Axial-Lead Capacitor(C17, 36, 38, 39)
24-50047647 uF, 50 V Aluminum Electrolytic Fixed Axial-Lead Capacitor(C16)

31-1N100 Type-1N100, 100 V Switching Diode (CRI, 2, 5, 7) 31-1N914 Type-1N914, 75 V Switching Diode (CR3, 4) 33-2N3906, Type-2N3906 PCB Switching and Amplifying Transistor (Q7, 11) 34-2N3904 Type-2N3904, 60 V, 1 W NPN Transistor (Q1, 5, 6, 8, 10, 12) 34-2N6044 Type-2N6044 Darlington NPN Transistor (Q2-4)

37-555Type-555 Integrated Circuit(A4)
37-1495Type-MC1495L Integrated Circuit(A/B11, A/B12, C11, C12)
37-7433Type-7433 Integrated Circuit(L10)
37-13201Type-LF 13201 integrated Circuit(B10, E10)

37-74109 Type-74109 Integrated Circuit (E5) 37-74193 Type-74193 Integrated Circuit (E4)

37-LM324Type-LM324 Integrated Circuit(B5, D5)
37-74LS00Type-74LS00 Integrated Circuit(E3, L3)
37-74LS02Type-74LS02 Integrated Circuit(K5, K6, N5)
37-74LS04Type-74LS04 Integrated Circuit(J3, K9)
37-74LS08Type-74LS08 Integrated Circuit(L4, L6)
37-74LS14Type-74LS14 Integrated Circuit(F7)
37-74LS20Type-74LS20 Integrated Circuit(H3, H5)
37-74LS27Type-74LS27 Integrated Circuit(M4)
37-74LS32Type-74LS32 Integrated Circuit(J6, M5, R4)
37-74LS42Type-74LS42 Integrated Circuit(H7)
37-74LS74Type-74LS74 Integrated Circuit(K3, L5)
37-74LS139Type-74LS139 Integrated Circuit(J7)
37-74LS157Type-74LS157 Integrated Circuit(F6, K8, L8, M8, N3, N8, R3)
37-74LS161Type-74LS161 Integrated Circuit(J4, M6, N6, P6, R6)
37-74LS164Type-74LS164 Integrated Circuit(M3)
37-74LS174Type-74LS174 Integrated Circuit(P2, P4)

[Continued on next page]

3-21

Page 48

Maintenance, Repair and Parts Gravitar™

Figure 3-8 Gravitar™ Game PCB Assembly, continued Parts List

Part No. Description (Reference Designations and Locations in Bold)

37-74LS175Type-74LS175 Integrated Circuit(C6, D6, D7, E6, H6, K2, K10)
37-74LS191Type-74LS191 Integrated Circuit(C7)
37-74LS194Type-74LS194 Integrated Circuit(A8, B8, C8, F8, H8, J8)
37-74LS244Type-74LS244 Integrated Circuit(B1, C1, E2, H2, L9, M9, N9)
37-74LS245,Type-74LS245 Integrated Circuit(F2, P8)
37-74LS273Type-74LS273 Integrated Circuit(E8, R9)
37-74LS374Type-74LS374 Integrated Circuit(J2)
37-74LS393Type-74LS393 Integrated Circuit(F4, H4)
37-74S00Type-74S00 Integrated Circuit(E7)
37-74802Type-74S02 Integrated Circuit(B7)
37-74S04Type-74S04 Integrated Circuit(F3)
37-74874Type-74S74 Integrated Circuit(A6, A7)
37-748260Type-74S260 Integrated Circuit(J5)
37-7815+15 V Voltage Regulator(VR2)
37-7915- 15 V Voltage Regulator(VR1)
37-TLO82CPType-TL082 Integrated Circuit(A10, 010, D/E11, D/E12, R8)

38-MV5053 Type-MV5053 Light-Emitting Diode (CR6) 41-3003 100 wH, + 10%, Hot-Molded Plastic Fixed R.F. Choke (L1-3) Acceptable substitute is part no. 141002-001 66-114P1T 4-Station Single-Throw, Dual-Inline-Package Bit Switch. (P10) 66-118P1T 8-Station Single-Throw, Dual-Inline-Package Bit Switch (B4, D4)

72-46810S#8 x %-Inch Phillips-Head Screw(secures PCB to cabinet)
79-42C2222-Contact Medium-Insertion-Force Integrated Circuit Socket(M2)
79-42C2424-Contact Medium-Insertion-Force Integrated Circuit Socket(D1, E/F1, H1, J1, K7, K/L1, L7, M1,

MIN7, N/P1, NIP7, R7)

79-42C4040-Contact Medium-Insertion-Force Integrated Circuit Socket(B3, C2, C/D3, J9)

81-4302 Nylon Snap-In Fastener 90-6013 Microprocessor (C2) 034536-02 Foam Pad 038178-03 Dual-Slotted PCB Retainer 110000-101 100 2, +5%, % W Resistor (R90, 91, 214, 217)

110000-1021kQ, +5%, % W Resistor(R19, 23, 47, 51, 55, 71, 82, 104-106, 108-113, 121-127, 139-143, 149,

152, 156, 160, 182, 204) 110000-103 10 kQ, +5%, % W Resistor (R1-18, 20-22, 24-41, 46, 58, 61-68, 72, 136-138, 159, 179, 202)

110000-104100 kQ, +5%, % W Resistor(R45, 50, 74-81)

110000-105 1MQ, +5%, % W Resistor (R43, 44, 48) 410000-122 1.2 kQ, +5%, % W Resistor (R59, 190) 110000-123 12 kQ, +5%, % W Resistor (R200) 110000-151 150 2, +5%, % W Resistor (R107) 410000-153 15 kQ, +5%, v4 W Resistor (R150, 161, 177) 110000-221 220 Q, +5%, % W Resistor (R42, 73, 102, 103) 110000-222 2.2 kQ, +5%, Vs W Resistor (R57, 173-175, 185, 196-198, 207)

110000-22322 kQ, +5%, V4 W Resistor(R69, 155)

3-22 [Continued on next page]

Page 49

Gravitar™ Maintenance, Repair and Parts

" . ™ . Figure 3-8 Gravitar Game PCB Assembly, continued Parts List

Part No. Description (Reference Designations and Locations in Bold) 110000-272 2.7 kQ, +5%, Ya W Resistor (R181, 205) 110000-332 3.3 kQ, +5%, Vs W Resistor (R53, 54) 110000-392 3.9 kQ, +5%, Y% W Resistor (R49, 52, 60, 89, 178, 183, 186, 201, 206, 208)

110000-471470 2, +5%, v4 W Resistor(R114-119, 128-131, 133-135, 144-148, 151, 154, 158, 169, 170, 176,

184, 193, 194, 199, 209) 110000-472 4.7 kQ, +5%, Vs W Resistor (R56)

110000-561560 Q, + 5%, % W Resistor(R164)

110000-562 5.6 k&, +5%, % W Resistor (R188, 211)

110000-68068 2, +5%, % W Resistor(R215, 218)

110000-681 680 2, + 5%, % W Resistor (R180, 203) 110000-682 6.8 kQ, +5%, Vs W Resistor (R216, 219)

110000-68368 kQ, +5%, % W Resistor(R70)
110001-271270 2, +5%, v2 W Resistor(R195)

110001-680 68 2, +5%, V2 W Resistor (R153) 110003-752 7.5 kQ, +1%, W Resistor (R87, 88, 96, 97, 100, 101, 162, 163, 165-168)

110004-001Voltage Dependent Resistor(RV1, 2)
119002-10310 kQ Vertical PCB-Mounting Cermet Trimpot(R189, 192, 212, 213) Acceptable substitute is

Part no. 19-315103

119002-2022 kQ Vertical PCB-Mounting Cermet Trimpot(R187, 210) Acceptable substitute is part no.

19-315202

119002-501500 2 Vertical PCB-Mounting Cermet Trimpot(R98,99) Acceptable substitute is part no.

19-315501 122000-225 2.2 uF, + 10%, 35 V Tantalum Capacitor (C110) 122002-102 0.001 uF, 50 V, Ceramic-Disc Radial-Lead Capacitor (C27, 28) 122002-104 0.1 uF, 50 V, Ceramic-Dise Radial-Lead Capacitor (C1-15, 18-22, 25, 26, 29, 35, 37, 40-43, 45-63, 70, 73, 81-84, 86-101, 103-109, 114-116, 122-126, 130, 131, 134, 135) 122005-103 0.01 uF, 25 V, Ceramic-Dise Radial-Lead Capacitor (C44, 71) 122008-224 0.22 uF, 25 V, Ceramic-Disc Radial-Lead Capacitor (C30, 33, 34) 122010-473 0.047 uF, + 10%, 50 V, Axiai-Lead Epoxy-Dipped Polycarbonate Capacitor (C72, 80)

128002-10010 pF, 100 V, Radial-Lead Epoxy-Dipped Mica Capacitor(C85)
128002-101100 pF, 100 V, Radial-Lead Epoxy-Dipped Mica Capacitor(C23, 129)

128002-151 150 pF, 100 V, Radial-Lead Epoxy-Dipped Mica Capacitor (C113) 128002-221 220 pF, 100 V, Radial-Lead Epoxy-Dipped Mica Capacitor (C118)

128002-39039 pF, 100 V, Radial-Lead Epoxy-Dipped Mica Capacitor(C24, 112, 127, 132)

131002-001 Type-1N754A, 6.8 V Zener Diode (CR8)

136002-125,Programmable Read-Only Memory(N4)
136010-301Programmable Read-Only Memory(D1)
136010-302Programmable Read-Only Memory(E/F1)
136010-303Programmable Read-Only Memory(H1)
136010-304Programmable Read-Only Memory(J1)
136010-305Programmable Read-Only Memory(K/L1)

136010-306 Programmable Read-Only Memory (M1)

136010-207Programmable Read-Only Memory(MIN7)
136010-208Programmable Read-Only Memory(N/P7)
136010-309Programmable Read-Only Memory(R7)

136010-210 Programmable Read-Only Memory (L7) 136010-111 Programmable Read-Only Memory (R1)}

136010-112Programmable Read-Only Memory(R2)
137002001Type-74S86 Integrated Circuit(B6)

[Continued on next page]

3-23

Page 50

Maintenance, Repair and Parts Gravitar™

Figure 3-8 Gravitar™ Game PCB Assembly, continued Parts List

Part No. Description (Reference Designations and Locations in Bold)

137149-001Type-74LS11 Integrated Circuit(F5)

137159-001 8-Bit Digital-to-Analog Converter (D9) 137161-001 Electrically-Alterable Read-Only Memory (M2)

137177-001Type-74LS138 Integrated Circuit(P3)

137179-001 Address Controller (J9) 137211-001 Random-Access Memory (N/P1, K7)

137236-001Type-74S10 Integrated Circuit(K4)

141002-001 100 uH Inductor

144000-00112.096 MHz, + .005% Crystal(¥1)

175004-706 #8 Spacer (secures PCB to cabinet) 179051-002 Test Point Acceptable substitute is part no. 020670-01 C012294-01 Audio I/O N-Channel MOS/LSI Custom Chip (B3, C/D3)

3-24

Page 51

Gravitar™ Maintenance, Repair and Parts

NOTICE TO ALL PERSONS RECEIVING THIS DRAWING CONFIDENTIAL: Reproduction forbidden without the spe- R33 cific written permission of Atari, Inc., Sunnyvale, CA, This fa ‘rawing is only conditionally issued, ana neither fecexpt nor rc possession thereof confers or transters any right in, of li- ye Pauel

Cense to use, the subject matter of the drawing or any de-0ame oolJ
sign or technical information shown thereon, nor any fightc|catQ
to reproduce this drawing or any part thereof. Except for4a5
manufacture by vendors ol Atari, Inc., and for manufacture-z0
nde the cargoaton's writen license, no right to repr,oRz=

luce this drawing is granted or the subject matter thereo:

Unless by written agreement with or written. permission=aay
from the corporation.C20.cal0

cig e 3300 35V

p32 a) 5.6K

a

(e)39R241, 7W}—oO

Pa

LTIP 32TOAZOOZATDA2002ZA

tAQ2_NaG02 QS a7 i CR oo As

R522+]8SaS
759 RA.C7 Geen)CleBG
0SIRS |).Cel]|.9)cistza
cage{=|poariaOS)RP2B2 O14
BERisiee7220 | R2i, 1/2w
2KE)+tcleyb
uyaf] 28ane470_*

« Bags ee oR

clyt“CAGoc
470470 *TeFR!

oS fatorn

NyRio}£19“
4—sFo+h—
=0zoae

R30 RI Jew Fin 4002

oPviz)0

Unt —j+ 3300uF [—

iala35V

Figure 3-9 Regulator/Audio Il PCB Assembly A035435-04 D

3-25

Page 52

Maintenance, Repair and Parts Gravitar™

Figure 3-9 Regulator/Audio || PCB Assembly, continued Parts List

Part No. Description (Reference Designations and Locations in Bold) 19-100P 1015 0.1.2, +3%, 7 W Wirewound Resistor (R24) 24-250108 1000 uF, 25 V, Aluminum Electrolytic Fixed Axial-Lead Capacitor (C13) 24-250477 470 uF, 25 V, Aluminum Electrolytic Fixed Axial-Lead Capacitor (C1, 4, 12) 24-350338 3300 uF, 35 V, Aluminum Electrolytic Fixed Axial-Lead Capacitor (C9, 10, 18, 19) 31-1N4002 Type-1N4002, 1 A, 100 V Silicon Rectifier Diode (CR1, 4) 31-1N5401 Type-1N5401, 3 A, 100 V Silicon Rectifier Diode (CR5-8) 33-TIP32 Type-TIP32 PNP Power Transistor (Q2) 34-2N3055 Type-2N3055 NPN Silicon Transistor (Q3) 37-LM305 5 V Linear Voltage Regulator (Q1) 72-1608C #6-32 x 2-Inch Cross-Recessed Pan-Head Corrosion-Resistant Steel Machine Screw (Q3) 72-6606S #6 x %-Inch Cross-Recessed Pan-Head Thread-Forming Type-AB Zinc-Plated-Steel Screw (Q5, 7) 72-6810S #8 x %-Inch Pan-Head Screw (secures PCB to cabinet) 75-F60405 #6-32 x ¥4-Inch Binder-Head Nylon Screw (Q2) 75-99516 #6-32 Nut/Washer Assembly (Q3) 78-16008 Thermaily Conductive Silicon Insulator (Q3) 78-16014 Thermally Conductive Silicon Insulator (Q2) 79-58306, 6-Position Connector Receptacle (J6, 9) 79-58308 9-Position Connector Receptacle (J7) 79-58346, 12-Position Connector Receptacle (J10) 79-58354 4-Position Connector Receptacle (J8) 034531-01 Heat Sink 035436-02 Foam Pad 100015-103 0.01 uF, 25 V Minimum, Ceramic-Disc Axial-Lead Capacitor (C5, 14) Acceptable substitute is part no. 122005-103 110000-010 12, +5%, % W Resistor (R10, 19) 110000-100 10 Q, +5%, % W Resistor (R11, 20, 29, 30) 110000-101 100 2, +5%, % W Resistor (R4, 12, 22) 110000-102 1kQ, +5%, Ya W Resistor (R27, 28) 110000-103 10 kQ, +5%, % W Resistor (R13, 14) 110000-271 270 2, +5%, v4 W Resistor (R1) 110000-330 33 Q, +5%, v4 W Resistor (R3) 110000-392 3.9 kQ, +5%, 1% W Resistor (R6) 110000-562 5.6 kQ, +5%, %4 W Resistor (R32, 33) 110000-752 75 kQ, 5%, Ys W Resistor (R7) 110001-221 220 2, +5%, V2 W Resistor (R9, 21) 110009-027 2.7 2, +5%, 1 W Resistor (R5) 119002-102 1k Vertical PCB-Mounting Cermet Trimpot (R8) Acceptable substitute is part no. 19-315102 122002-102 0.001 uF, 50 V, Ceramic-Disc Axial-Lead Capacitor (C2, 7, 16) 122002-104 0.1 uF, 50 V, Ceramic-Disk Axial-Lead Capacitor (C3, 11, 20, 21) 122004-224 0.22 uF, 25 V Minimum, Ceramic-Disc Axial-Lead Capacitor (C6, 8, 15, 17) 137151-002 Type-TDA2002A, 8 W, Linear Audio Amplifier Integrated Circuit (Q5, 7) 175004-706 #6 Fiber Spacer (secures PCB to cabinet) 179051-001 Test Point Acceptable substitute is part no. 020670-01

3-26

Page 53

Gravitar™ Maintenance, Repair and Parts

G. Power Supply Assembly

‘A037395-01 (Transformer Assy.)

WARNING

Fuse cover must be in place during game operation.

A021084-xx (Volt. Plugs)

29-053 (Capacitor) 034544.01 (Fuse Block Cvr.)

79-4411001 (Fuse Post)

78-70501SC i (Cap. Bracket) mL, 46-2017002 (Fuse)

A035891.02 034482.02 (Fuse Harness) (Chassis)

46-301 203 (Fuse)

037639-01 (Label)

78-2708 (Bushing)

A034630-01 Iso Ble (Filter Assy.) (Fuse Block) 037641-01 t0.2014002 (Label) 20140

A035890-01 79-15021001 (Term. Block) \ (Pwr. Harness) 3A-MDA3501 A034629-01 F (A.C. Harn (Rectitier) (AC. Harn.)

Figure 3-10 Color X-Y Power Supply Assemblies A037396-xx c

3-27

Page 54

Maintenance, Repair and Parts Gravitar™

Figure 3-10 Color X-Y Power Supply Assemblies Parts List

Part No. Description (Reterence Designations in Bold) A021084-01 Voltage Plug for 100 V_ (violet)

A021084-02Voltage Plug for 120 V_(yellow)

A021084-04 Voltage Plug for 220 V (blue) A021084-05 Voltage Plug for 240 V (brown) A034629-01 AC Harness Assembly

A034630-01RFI Filter Assembly(FL1)

A035890-01 Power Harness Assembly A035891-02 Fuse Harness Assembly A037395-01 Color X-Y Transformer Assembly (T1) 29-053 27,000 pF 15 VDC Electrolytic Capacitor (C1) 3A-MDA3501 Type-MDA 3501 Bridge Rectifier (CR1) 46-2014002 4 A, 250 V, 3AG Slow-Blow Glass Cartridge-Type Fuse (F2, F4-F6) 46-2017002 7 A, 250 V, 3AG Slow-Blow Glass Cartridge-Type Fuse (F1) 46-301203 20 A, 32 V, 3AG Slow-Blow Glass Cartridge-Type Fuse (F3) 78-2708 Nylon Type 6/6 Hole Bushing with %-Inch Inside Diameter x %,-Inch Outside Diameter x Ya-Inch Thick 78-70501SC 2-Inch Diameter Capacitor Mounting Bracket 79-15021001 2-Circuit Single-Row Terminal Block 79-3206 5-Position 3AG Fuse Block with ¥%-Inch Quick-Disconnect Terminals 79-4411001 Panel-Mounting Non-Indicating 3AG Cartridge-Type Fuse Post 034482-02 Power Supply Chassis Base 034544-01 Fuse Block Cover 037243-01 Metal Base Plate (not shown in illustration) 037639-01 Label for Fuse Value (F1)

037641-01Label for Fuse Values(F2-F6)
NOTE A037396-01 power supply assembly has the 120 V plug A037396-02 has the 100 V, 220 V, and 240 V plugs A037396-03 has the 220 V and 240 V plugs

Line Voltage Range Voltage Selection Plug Wire Color 90-110 VAC (100) 105-135 VAC (120) 200-240 VAC (220) 220-260 VAC (240)

3-28 Violet Yellow Blue Brown

Page 55

YOUR COMMENTS, PLEASE!

Your comments will assist Atari in improving our publications. The comments are an important part of preparing for revisions of game manuals. Please write in the space below. No postage stamp is necessary if mailed in the U.S.A.

If you have any technical questions about certain ATARI games products, or are requesting additional publications, we will immediately forward your note to the appropriate person.

Page: Comments:

Fil in if you wish a reply:

Name.

Firm O Distributor

Address. CO Operator City State Zip CO Other. Gravitar™ 2nd printing

Area Code Phone

Page 56

First fold

No Postage Necessary

BUSINESS REPLY MAIL

FIRST CLASS PERMIT NO. 1004 SUNNYVALE, CA

POSTAGE WILL BE PAID BY ADDRESSEE

Atari, Inc. Attn.: Field Service/Coin-Op Division P. O. Box 427 Sunnyvale, California 94086 H mailed in the United States

Second told

Wwol4 =

Page 57

YOUR COMMENTS, PLEASE!

Your comments will assist Atari in improving our publications. The comments lu are an important part of preparing for revisions of game manuals. Ple. the space below.

If you have any technical questions about certain ATARI games products, or are requesting additional publications, we will immediately forward your note to the appropriate person.

Page: Comments:

Fill in if you wish a reply:

Name.

Firm O Distributor

Address O Operator

City Country L Other. TM-206, 2nd printing

Phone City Code Country Code

Page 58

First fold

Atari Ireland Limited Attn.: Field Service/Coin-Op Division

Tipperary Town, Ireland

Attach Necessary Postage

Second fold

wos if

Page 59

Seller warrants that its printed-circuit boards and parts thereon are free trom detects in material and workmanship under normal use and service for a period of ninety (90) days from date of shipment. Seller warrants that its video displays (in games supplied with displays) are free from defects in material and workmanship under normal use and service for a period of thirty (30) days from date of shipment. None of the Seller's other products or parts thereof are warranted, If the products described in this manual fail to conform to this warranty, Sellers’ sole liability ‘shall be, at its option, to repair, replace, or credit Buyer's account for such products which are returned to Seller during said warranty period, provided:

  • Seller is promptly notified in writing upon discovery by Buyer that said products are defective;

(b) Such products are returned prepaid to Sellers’ plant; and

  • Seller’s examination of said products discloses to Seller's satisfaction that such alleged installation or improper testing, In no event shall Seller be liable for loss of profits, loss of use, incidental or consequential damages. Except for any express warranty set forth in a written contract between Seller and Buyer which contract supersedes the terms of this order, this warranty is expressed in lieu of all other warranties expressed or implied, including the implied warranties of merchantability and fitness for a particular purpose, and of all other obligations or liabilities on the Seller's part, and it neither assumes nor authorizes any other person to assume for the Seller any other liabilities in connection with the sale of products under this order.

The use of any non-Atari parts may void your warranty, according to the terms of the warranty. The use of any non-Atari parts may also adversely affect the safety of your game and cause injury to yourself and others. Be very cautious in using non-Atari-supplied components with our games, in order to insure your safety, Atari distributors are independent, being privately owned and operated. In their judgment they may sell parts or accessories other than Atari parts or accessories. Atari cannot be responsible for the quality, suitability or safety of any non-Atari part or any modification including labor which is performed by such distributor. This document is and contains confidential trade secret information of Atari, Inc. This document is loaned under confidential custody for the sole purpose of operation, maintenance or repair of Atari equipment and may not be used by or disclosed to any person for any other purpose whatever, and remains the property of Atari, Inc. Neither it nor the information it contains may be reproduced, used, or disclosed to persons not having a need to know consistent with the purpose of the loan. without written consent of Atari, Inc.

Page 60

ATARI, INC. 790 SYCAMORE DRIVE PO. BOX 906 ae _ MILPITAS, CALIFORNIA 95035 408/942-3100 © TELEX 35-7488

=é