CATHODE RAY TOMES

VS Golf

VS. Golf (Nintendo of America Inc.) · Document · 3 pages · 3 sections · original scan

Page 1

VS.GOLF

(Operation Manual)

|. How to install Software ROMs

Each Software ROM is labeled with a Location Number shown on it (I§QQShaded Portion illustrated below), which indicates the corresponding location on the P.C. Board where it shoud be installed.

(Label on Software ROM)

“VS.GOLF” contains 6 Software ROMs, and 1 Custom IC, which have location numbers, 6A(1A), 6B(18), BC(1C), 60(1D), 8A(2A), 8B(2B) and 8F(2F). Each ROM and IC must be mounted into the proper IC Socket.

@ ABC DE FH JK LELMN PR

CAUTION : Make sure the Software ROMs and Custom ICs are inserted properly.

SW1 corresponds to this program. MAIN (Left side for Upright Model) NdD-10-SQW

SW2 corresponds to this program. SUB (Right side for Upright Model)

ROM and IC Location on P.C. Board

NOTE: ALL Software ROMs and Custom ICs must be inserted in both portions on the P.C. Board as shown above. “VS.GOLF” can be interchanged between left and right side.
Page 2
  • Points and methods of adjustment

Game Option Settings MDS P.C. Board

MDS FOR VS. GOLF 12345678 123945678 Swe (SW1) lon TT 1[/2]3[4[s5]6]7 OFF ‘Credit/Coin 1/4] ON | ON | ON

  • OL 1/3] ON | ON | OFF 1/2) ON | OFF | ON MOS-91-CPU 1/1) ON | OFF | OFF oi SW aw 2/1) OFF | ON | ON a 3/1] OFF | ON | OFF z 4/1| OFF | OFF | ON |
=Free| OFF | OFF | OFF {H.
FHole SizeLarge|OFF
x“_.Small;|. | ON_d

Points i OFF : i oN

=Starting Points10‘OFF | OFF
i13oFF | ON
616ON | OFF
°L20L.on | oN
oMatcn PlayEasyOFF
oVS, ComputerHardON
“Stroke PlayOFF_ON

Hole in One |.

CAUTION: Make sure the SoftwareDouble Eagle+4+3

ROMs and Custom ICs are Eagle +3 | +2

inserted properly.Birdie+2+1
SW1 corresponds to this program.Par+t-0-
MAIN (Left side for Upright Model)Bogey-0-|-1
SWe corresponds to this program.Oouble Bogey & Over-0- | -2
SUB (Right side for Upright Model)Match PlayOFFON

Win the Hole +1 | 42 Even =0- Lose the Hole -1 | -2

Page 3

CAUTION

The suggested factory settings for VS. coit™ are listed below. It is recommended that you carefully check the dip switch settings prior to operation. For the VS. DualSystem™, the dip switch settings will be on either SW1 or SW2, depending on which side of the p.c. board you install the EPROM's and custom IC. Refer to the operation manual for further instructions. For the VS. UniSystem™, the EPROM's and the custom IC must be installed in the "sub" side of the p.c. board, and then SW2 is used.

© © 9)

SW1 or SW2 SS i an J

tt

e

w ON o i x] o _ sani OFF otf 28 a) a o feRy ES Bs < Gee € me © -an9 ens [%

Please refer to the dip switch settings label and the VS.-PAKT™ Operation Manual for further information.

Nintendo of America inc.