CATHODE RAY TOMES

Indy 500 Twin Owners Manual 2nd Printing Jan 96 (4201-6184-03)

INDY 500 Twin (Revision A, Newer) (Sega, 1995) · Owner's Manual · 92 pages · 35 sections · original scan

Page 1

WUT WHT

OW Il

TWIN

NER’ S MANUAL

u

LALIT

con

EGA ENTERPRISES, INC. (USA)

HHT

MANUAL NO. 4201-6184-03

Page 2

_ Contents

INTRODUCTION OF THE OWNER’S MANUAL PRODUCT SEALS AND SAFETY CERTIFICATIO! HANDLING PRECAUTIONS .....0...c.scesseesstesseessssnees INSTALLATION AND LOCATION PRECAUTIONS SPECIFICATIONS INSTALLATION ITEMS . ASSEMBLING THE MACHINE Uncrate Left-Side Cabinet (Crate #1)... Uncrate Right-Side Cabinet (Crate #2) . Uncrate Cash Box Tower and Billboard (Crate #3). Prepare Cabinets and Tower for Assembly Install Right-Side Cabinet .. Install Left-Side Cabinet .. Install Billboard ... Adjust Leg Levers ... Linking Left- and Right-Side Cabinets . Power On....... Check Game Board Parameters .. HOW TO PLAY os esseesstestesseeseeens EXPLANATION OF TEST AND DATA DISPLAYS . Test Mode Scheduling . Service Panel Test Menu . Memory Test .. T.G.P. Test .. Input Test .. Output Test Sound Test C.R.T. Test (RGB Color Adjustment, Monitor Size Adjustment) . Game ASSignMent ...........csssesesecesessestesesseess Coin Assignment (Coin/Credit, Manual Setting) Control Range (“Volume”) Setting Bookkeeping (Credits and Times, Time Histogram) Backup Data Clear PERIODIC CHECK ..... TROUBLESHOOTING MACHINE OPTIONS... Linking Instructions (Assembly, Game System Settings, Playing Instructions) .. PARTS LIST OMMINIRVADNAWHN

Page 3

Contents (cont.)

SERVICE INFORMATION . Billboard Lamps Replacement Monitor Service ..........0++ Underseat Cabinet Access Replacing Fans and Fuses... Replacing the Underseat Speake: Lubricating the Seat Rails Drive Board DIP Switch Setting: Accelerator and Brake Greasing, Adjustment, and Replacement Steering Wheel Service Shift Lever Greasing and Switch Replacement Button Lamp Replacement WIRING DIAGRAM INDY 500 TWIN MANUAL COMMENTS.

Page 4

CO RO | List of Figures

Figure Title Indy 500 Twin Installation Dimensions Rear View, Assembled Indy 500 Twin Cabinet Right-Side Cabinet Installation . Left-Side Cabinet Installation. Billboard Installation Location Billboard Installation Detail Cabinet, Bottom View .... Leg Levelers, Bottom View Leg Leveler and Caster, Side View Joint Plate Installation ............... Fiber Optic Cable Connector Two Player Linking ............ Power-On Check of Steering Wheel. Network Check Screens Service Panel Controls. Course Selection On-Screen Display Locations . Control Locations ............+. Service Panel Controls and Indicator: Turning the Steering Wheel... Centering the Steering Wheel . Fiber Optic Cable Connector ... Four Player Linking Diagram. Six Player Linking Diagram... Eight Player Linking Diagram Seat Numbering Diagram ... Network Assignments Screen - Stand-Alone Mod Network Assignments Screen - Linked Master Cabinet Network Checking Screens Indy 500 Twin Graphics .. Indy 500 Twin Cabinet Assembl Billboard Assembly ......... Billboard Upper Assembly . Billboard Lower Assembly . Lamp Assembly Control Panel Assembly Start and View Button Assembly Shifter Assembly Gas And Brake Pedal Assembly Seat Assembly

Page 5

List of Figures (cont.)

Game Board Set Assembly ROM Board Indy 500 Twin Flow Chart Drive Control Board Motor Drive Board.. Game Board, Power Supply and Fan Locations - Under seat Shield Case and Fuse Locations - Under Middle Floorboard Shield Case and Fuse Locations - Under Accelerator and Brake Floorboard Billboard Lamps Replacement. Monitor Controls Location... Nanao Monitor Controls Function: Underseat Cabinet Access .. Underseat Cabinet Lid Remov. AC Fuse Location Lubricating the Seat Rails . Drive Board Location Drive Board Dip Switch Location Accelerator and Brake Access Accelerator and Brake Assembly . Accelerator and Brake Greasing Access Control Panel Access ........ Steering Wheel Adjustment Steering Wheel Greasing Shift Lever Access ... Shift Lever Greasing Shift Lever Switch Location . Button Access... Wiring Diagram

Page 6

ne lo

NNNNNNNE ER eee eee ANRBONKDOCMIDARWNHHKO . Table Title

List of Tables

Indy 500 Twin Specifications Installation Items .. Course Descriptions. On-Screen Indicators Test Mode Scheduling . Service Panel Function: Control Value Ranges .. Race Mode Lap Lengths .. Sound Level Settings Coin/Credit Settings Manual Settings: Coin to Credit Manual Settings: Bonus Adder .. Manual Settings: Coin Chute #X Multiplier Periodic Check and Maintenance Items Troubleshooting Guide .............. Indy 500 Twin Graphics Parts List Billboard Parts List......... Billboard Upper Parts Lis' Billboard Lower Parts List . Lamp Parts List Control Panel Parts Lis! Start and View Button Parts List Shifter Parts List ......0..0..004 Gas and Brake Pedal Parts Lis Seat Parts List Drive Board DIP Switch 1 Setting:

Page 7

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 8

INTRODUCTION OF THE OWNER’S MANUAL

. SEGA ENTERPRISES, LTD., supported by its high technology semiconductors, microprocessors, etc. and a wealth of experience, has for more than 30 years been supplying various innovative and popular game machines to the world market. This Owner’s Manual is intended to provide detailed descriptions together with all the necessary information relating to servicing, control, spare parts, and so on, for the Indy 500 Twin, a new SEGA product.

This manual is intended for those who have knowledge of electricity and technical expertise, especially in ICs, CRTs, microprocessors, and circuit boards. Read this manual carefully to acquire sufficient knowledge before working ‘on the machine. Should there be a malfunction, nontechnical personnel should under no circumstances touch the interior system. Should the need arise, contact our Main Office or the closest branch office listed:

SEGA ENTERPRISES, INC. (U.S.A.) Customer Service

41533 Industrial Drive Fremont, CA 94538 USA Phone (415) 802-1750 FAX: (415) 802-1754

Page 9

PRODUCT SEALS AND SAFETY CERTIFICATION

  • PRODUCT LABELING

To prevent counterfeits and conversions, the following labels are put on all SEGA products. When handling such goods, be sure to confirm the labels. They are used to prevent illegal acts such as the unauthorized copying of merchandise or by converting, selling or using products or printed circuit boards.

ORIGINAL SEAL LICENSE SEAL

The following seal is put on all machines The following seal is put on all SEGA kits, manufactured by SEGA. such as printed circuit boards.

twrenrmses iro f van ea area

SAFETY CERTIFICATION

UL, Listed Amusement Machine: Model SUR-0017-001 FCC Part 15 Subpart J, class A

This equipment has been tested and found to comply with the limits for a Class A digital device in accordance with the specifications in Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Page 10

HANDLING PRECAUTIONS

  • When installing or inspecting the machine, be aware of the following safety items. Pay attention so that the players can enjoy the game safely.
  • Turn the power off before working on the machine.
  • Do not insert or pull out the plug quickly. + Make sure that the power cord and ground wire are not exposed during transportation. Make sure that all ground connections are made safely at the installation position where specified. + Do not use any fuse that does not meet the specified rating.
  • Make complete connections for the IC board and other connections. Insufficient connections are very dangerous.
  • When cleaning the monitor glass, use a soft cloth. Do not apply chemicals such as benzine or thinner. + Sega Enterprises, Inc. (U.S.A.) is not liable for any damages or injury resulting from use of this equipment in a manner for which it was not designed or intended.
Page 11

INSTALLATION AND LOCATION PRECAUTIONS

The Indy 500 Twin is an indoor game machine. Absolutely do not install it outside. Even indoors, to ensure proper usage, avoid installing in any of the places mentioned below. Follow all of the installation instructions and precautions when installing the machine.

LOCATION PRECAUTIONS: Places subject to rain or water leakage, or condensation due to humidity. In the proximity of an indoor swimming pool and/or shower. Places subject to direct sunlight. Places subject to heat sources from heating units or hot air. In the vicinity of highly inflammable/volatile chemicals or hazardous matter. On sloped surfaces. In the vicinity of anti-disaster facilities such as fire exits and fire extinguishers. Places subject to any type of violent impact. Dusty places.

INSTALLATION PRECAUTIONS:

Do not insert more than one electrical plug into the power plug socket. The per unit standard voltage/amperage is 120V/10A. Use of extension cords should be avoided. If you must use an extension cord, ensure the extension cord is rated at 15A or higher. For transporting the machine into the location’s building, the minimum necessary dimensions of the opening (doors, etc.) are 35 in. (W) x 70 in. (A). For operation of the machine, the minimum installation dimensions are 62 in. (W) x 65 in. (D). Due to its size and weight, use at least four (4) people to uncrate this game.

Page 12

SPECIFICATIONS

76 Inches

—> ~ . 65 Inches oo 62 Inches

Ficure 1: INpy 500 Twin INSTALLATION DIMENSIONS

Table 1: Indy 500 Twin Specifications PARAMETER | SPECIFICATION Dimensions: Crate 1 33 in. (W) x 67 in. (D) x 62 in. (H) Crate 2 33 in. (W) x 67 in. (D) x 62 in. (H) Crate 3 29 in. (W) x 62 in. (D) x 20 in. (H) Installed 62 in. (W) x 65 in. (D) x 76 in. (H) | Weight 1200 Ibs. Power & Current 900 W, 7.5A (120 VAC, 60 Hz)

Page 13

INSTALLATION ITEMS

The items listed in Table 2 are supplied with the Indy 500 Twin and should be included with the machine whenever the machine is moved.

TABLE 2: INSTALLATION ITEMS

PART NAMEQTY.LOCATIONPART NUMBER
Owner’s Manual - Indy 500 Twin1[in Cash Box4201-6184-03
Quickstart Card - Indy 500 Twin1In Cash Box

Left-side Cabinet 1 [caer i

Right-side Cabinet1Crate 2
Cash Box Tower1Crate 3 (Crate 3 is strapped to Crate 2)

[foie Pa 1 [ Crate 3 i

Biliboard1Crate 3

Billboard L-Brackets [2 In corners of Crate 3

jens Fiber Optic Cable 1 Coiled in Cash Box Tower 600-6275-0500

Mounting Bolts and Washers: In Installation Holes:

Left- and Right-side4Outside of Inner Panels|

Billboard:

Top of Right-side Cabinet42 front edge, 2 back edge
Top of Left-side Cabinet42 front edge, 2 back edge
Back of Billboard4Back Panel of Billboard

Tools: In Cash Box

Allen Wrench 1 Torx Anti-Tamper Wrenches:

MS1540-0007-01
M81540-0009-01
Coin Mech Door2Strapped to Controls
Cash Box2Behind Coin Mech Door
| Undersea Compartments4Behind Coin Mech Door
Page 14

ASSEMBLING THE MACHIN

WARNING!

When moving or lifting the INDY 500 TWIN game cabinet over surfaces of differing levels (steps and stairs), separate the left- and right-hand sides before moving the cabinet. Moving or lifting the cabinet while the left and right sides are connected may cause damage to the cabinet.

Uncrate Lert-Swe Casinet (Crate #1)

  • Move shipping crate #1 containing the left-side cabinet into location near the final installation location while

still on the pallet. ad Carefully remove the shipping bands, and top and sides of the crate.

ad Lift the left-side cabinet out and set on its casters.

> Roll the left-side cabinet into its approximate installation location. Note: The left-side cabinet has the power cord and the On/Off switch.

Uncrate Ricut-SweE CaBineT (CRATE #2) . Move shipping crate #2 containing the right-side cabinet into location near the final installation location while still on the pallet. bad Carefully remove the shipping bands, set aside crate #3, and remove and top and sides of crate #2. Lal Lift the right-side cabinet out and set on its casters. S . Roll the right-side cabinet into its approximate installation location.

Uncrate Caso Box Tower AND BILLBOARD (Crate #3) . Move shipping crate #3 containing the Cash Box Tower and the Billboard into location near the final installation location while still on the pallet. N . Carefully remove the shipping bands, and top and sides of the crate.

  • Lift out the Billboard, two L-brackets, and Joint Plate and set aside in a protected location. 4, Lift the Cash Box Tower out and set near its approximate installation location between the left- and rightside cabinets (see Figure 2). Ficure 2: REAR View, ASSEMBLED INpy 500 Twin CABINET

PREPARE CABINETS AND TOWER FOR ASSEMBLY

  • Unscrew and remove the rear cover of the Cash Box

Tower and set the cover aside.

  • Untape the wire harnesses from the outside of the inner panels of the left and right-side cabinets and the outside of the Cash Box Tower (see Figure 2).
  • Peel the blue protective covering off all silver trim strips on both left- and right-side cabinets. 4, Remove the upper two bolts and split washers from the outside of the inner panel of the left and right-side cabinets. Keep these bolts and washers available.
  • Loosen approximately 1/4 inch the lower two bolts on the outside of the inner panel of the left and right-side cabinets. Do not remove the lower two bolts.
Page 15

Instaty Ricut-Sie CaBineT

  • Connect the two right-side cable connectors to the Cash Box cable right-side connectors. Feed excess cable into the cabinet or Cash Box Tower.

Nv . Attach the Cash Box Tower to the inner panel of the right-side cabinet (see Figure 3) by lifting up the Cash Box tower and slipping the lower two slotted holes in the tower side over the lower two bolts and split washers on the right-side cabinet. Watch out for the sloping lower edge of the right-side cabinet monitor when lifting and installing the Cash Box Tower. The fender (large) washer stays between the right-side cabinet and the Cash Box Tower. Be sure that the cables

retract into either the cabinet or Cash Box Tower

without kinking. Do not tighten the bolts yet. Install the two upper bolts and washers from the inside al

of the Cash Box Tower (through the non-slotted holes) into the right-side cabinet. After making sure that the cables are not caught between the cabinet and Cash Box Tower, and that the Tower is resting snugly against the cabinet, tighten all four bolts from the inside of the Cash Box Tower.

Figure 3: Ricut-Sipe CABINET INSTALLATION Insrary Lert-Sipe Casinet

  • Connect the two left-side cable connectors to the Cash

Box cable left-side connectors. Feed excess cable into the cabinet or Cash Box Tower.

  • Attach the Cash Box Tower to the inner panel of the left-side cabinet (see Figure 4) by sliding the lower two slotted holes in the Cash Box tower over the lower two bolts and split washers on the left-side cabinet. Watch out for the sloping lower edge of the left-side cabinet monitor. The fender (large) washer stays between the left-side cabinet and the Cash Box Tower. Be sure that the cables retract into either the cabinet or Cash Box

Tower without kinking. Do not tighten the bolts yet.

  • Install the two upper bolts and washers from the inside of the Cash Box Tower (through the non-slotted holes) into the left-side cabinet. After making sure that the cables are not caught between the cabinet and Cash Box Tower, and that the Tower is resting snugly against the cabinet, tighten all four bolts from the inside of the Cash Box Tower.

Ficure 4: Lert-Sipz CapINeT INSTALLATION

Page 16

INSTALL BILLBOARD 1, Remove four 5/16 hex Billboard installation bolts from the top of both the left and right-side cabinets (8 total). Remove four 5/16 hex Billboard installation bolts from the back edge of the Billboard.

  • Carefully lift the Billboard to the top of the cabinets (see Figure 5),
  • Remove the three access screws from the front edge of the Billboard between the Billboard and Race Leader

Marquee.

  • Open the Billboard top section carefully.
  • Attach the Billboard to the top of the game cabinet using four 5/16 hex bolts installed inside the front edge of the Billboard (see Figures 5 and 6). Do not tighten the bolts yet,
  • Attach the Billboard to the top of the game cabinet

using 4 5/16 hex bolts installed through the L-bracket along the back outside edge the Billboard (see Figures 5 and 6). Do not tighten the bolts yet. Align the Billboard and tighten all the bolts. . From inside the Billboard, connect the three- and fourwe

pin Molex connectors (one each) to provide power to the lamps.

  • Reinstall the three access screws along the front edge of the Billboard to close the Billboard case.

FiGURE 6: BILLBOARD INsTaLLaTION DETAILS

Page 17
WARNING! Make sure that all eight of the leg levelers are in contact with the floor (see Figure 9). 1f they are not, the cabinet may move and cause an accident.

Apjust Lec LEVELERS

  • Move the game cabinet to its final installation position. Be sure to allow room for the players to climb on the machine.
  • Adjust the six outboard leg levelers (see Figure 7) on the cabinet by hand so they all make contact with the floor. Continue to adjust levelers until the machine is level and the casters are approximately 5 mm off of the floor (see Figure 8). If the casters are less than 5 mm off of the floor, the game may move during operation and become dangerous. we . After the adjustments are complete, tighten each leg leveler nut upward to secure the height of the leg leveler. (See Figure 9.) cal Attach the red joint plate (shipped in Crate 3) to the cabinet’s two inner leg levelers (see Figures 7 and 10). Slide the notches in the joint plate over the levelers.
  • Adjust the two inner leg levelers (see Figure 7) on the cabinet by hand so they both make contact with the floor. Continue to adjust levelers until the machine is level and the casters are approximately 5 mm off of the floor (see Figure 8). If the casters are less than 5 mm off of the floor, the game may move during operation and become dangerous.
  • After the adjustments are complete, tighten both leg leveler nuts upward to secure the height of the leg leveler. (See Figure 9.) . Since the cabinet is heavy, retract its leg levelers and roll on its casters (see Figure 9) when moving the machine over the floor. Do not move the assembled

cabinet over uneven floors, or up or down steps and

stairs. Detach the left and right-side cabinets from the Cash Box Tower before moving the cabinets over

uneven areas. Attach the joint plate

Ficure 7: Capinet, Borrom View

|OINT PLATE

Figure 8: Lec LeveLers, Bottom View

(f=

FiGure 9: Lec LEVELER AND CASTER, SIDE VIEW Approx. Sm

Page 18

Figure 10: Jomvt PLaTE INSTALLATION Ficure 11: Fiser Opric CaBLe CONNECTOR

Linkinc Lerr- anp Ricut-Sipe CapineTs

  • Locate the fiber optic linking cable (shipped in the cash box).
  • The cable and machine linking connectors are keyed so that they can only be connected when the long flat side of the cable connector is facing up (see Figure 11).
  • At the center rear of the machine, insert the black end of the linking cable into the TX connector and the red end into the RX connector (see Figure 12).
  • For information on linking multiple machines (4, 6, or 8 player linking) see the Machine Options: Linking section.
  • Loop and tuck the excess fiber optic cable between the left- and right-side cabinets. Do not bend the fiber optic cable.

CABINET ID 1 CABINET ID 2

Figure 12: Two PLayer LINKING

Page 19

Power ON

  • Plug the AC cord going from the rear of the left-side cabinet into a dedicated outlet.
  • Toggle the Main AC Switch, located at the lower center rear of the game cabinet. This will cause the machine to power up and run a Power On Check.
  • During the Power On Check, the steering wheel will turn left and right, then returns to the centered position (see Figure 13), allowing the control parameter values to be corrected (on the game board). Do not touch the steering wheel or other controls while the Power On Check is in progress or the steering wheel reaction during the game will be incorrect.

4, After the Power On Check is complete, the machine runs a Network Check to initiate communication with other linked machines. During this check, the Network Check screen appears (see Figure 14), The Network Check should take approximately 10 seconds. If it does not complete in 10 seconds, check the fiber optic cable connections (see the Machine Options: Linking section).

The steering wheel turns left/right automatically

Ficure 13: Power-On CHECK OF STEERING WHEEL

CHECKING NETWORK NOW Ver. X.XX CHECKING NETWORK NOW Ver. X.XX

Network Checking ! Network Checking !

Figure 14: Network CHECK SCREENS

Page 20

CuEcK GAME BoarD PARAMETERS After the Network Check is complete, the Game Board Parameters should be checked. Open the Coin Mech Door and press the Test Button on the Service Panel (see Figure 15) to place the machine in Test Mode. See the Test Menus section for further details.

LEFT RIGHT

lolofoofo|s foJo ololols COIN METER COIN METER

LEFT CONTROLS

RIGHT CONTROLS @

Ficure 15: SERVICE PANEL CONTROLS

In Test Menu, perform the following tests (see the Test Menu section for detailed instructions):

MEMORY TEST

Te15 coon 1i6 000 1eii G00 ic12_ coop 1e3, GoD 3c10 Good 3c7 Good Tee 00D axe: Selecting the Memory Test from the Test Menu

Heit Gooncis Good1c16 GooD3017 Goen
318 good3¢19, Go9pallows the game board memory ICs to be tested. Allow
3678 Goonx80 coopapproximately 75 seconds for this test to complete. All ICs
308 Goo183 coonck? Gooxc84 coon|
zeae coc—rc83_ coopshould show “GOOD.
3091 Goodtc92 GoodC93 GoD
1€27 coop1029 Goo«cz8 Gos1C30 ooo

PRESS TEST BUTTON TO EXIT

INPUT TEST »)

STEERING WHEEL 80H Selecting the Input Test from the Test Menu allows

GAS PEDAL30Heach switch and button to be tested. Press each switch and
BRAKE PEDAL308button. For the coin switch test, insert a coin in the coin

inlet with the coin chute door open. If the display beside SHIFT UP OFF

att (boo my or each switch and button shows “GOOD”, the switches,

VIEW1(ZOOM OUT)OFFbuttons, and wiring connections are good. Operate the
STARTOFFsteering wheel and gas and brake pedals and ascertain that
COIN CHUTEOFFthe values shown vary from low to high as given in the
SERVICEOFFTest Menu section for the Input Test.

TEST OFF

PRESS TEST BUTTON TO EXIT

Page 21

SELECT WITH SERVICE BUTTON

AND PRESS TEST BUTTON

~ SOUND TEST

No. 0

PRESS TEST BUTTON TO EXIT

\ PRESS TEST BUTTON TO CONTINUE

CITI rrrr im) C.R.T. TEST 2/2 HH t f H Tr BH

= H+H q im Tort FREE EEEEETH auss rest sorrai 70 mat COPELEEEE PEt Eee -ELY Selecting the Output Test from the Test Menu allows each lamp to be tested and the centering level for the Steering Wheel to be verified and adjusted if necessary. If the Steering Wheel centering level needs adjustments, make them according to the instructions given in the Output Test sections.

Selecting the Sound Test from the Test Menu allows each speaker to be verified. Be sure to verify that sound is emitted from each speaker at a satisfactory volume.

Selecting the C.R.T. Test from the Test Menu allows verification of the CRT’s adjustment. Although projector adjustments are made at the time of shipment, color deviation or other maladjustments may occur due to geomagnetism, other game machinery, or other factors. ‘View the test screens and make a judgment as the whether adjustments are necessary. If adjustments are necessary, make them according to the instructions given in the C.R.T. Test and Service Information sections.

Page 22

HOW TO PLAY

  • The following explanations apply to the case where the Indy 500 Twin is operating in the SINGLE mode. In cases where multiple machines are linked, see the Machine Options: Linking Instructions section.

1, Insert a coin(s). Inserting enough coins for one play causes the Game Select mode to appear on the screen.

  • The Course Select screen (see Figure 16) showing “INDY 500”, “HIGHLAND RACEWAY” and “BAYSIDE STREET” appears. The courses are described in Table 3. Turn the steering wheel to select the course, and make the selection by stepping on the Gas Pedal or pressing the Start Button. (See Figure 18 for control locations.) If the game is played in linked mode, the course selection is determined by a majority of the players, or, in the case of a tie, the course is selected from the tied courses in the order listed above.

Course Map q Indicates the positions of Position Limited Speed the leading car and the player's car. SELECT A COURSE _ payers cn 3/33 30 INDY500, al

BAYSIDE a] (ap) G=3 — f s LEN Ge Ia P{Gnen Tachometer, Speed Meter

Ficure 16: Course SELECTION Ficure 17: On-Screen Display Locations

Table 3: Course Descriptions COURSE DESCRIPTION Imaginary course through the folds of the hills. Features sharp ups and downs. Reproduction of the actual Indianapolis Motor Speedway. It is an oval course that is almost rectangular. Imaginary course through the streets of town. Both sides of the road are concrete walls. This is the most difficult of the three courses.

w There are 2 transmissions to choose from: AUTO and 6-speed MANUAL. Turn the steering wheel to select the desired transmission and make the selection by stepping on the Gas Pedal or pressing the Start Button. It is recommended that you choose AUTOMATIC transmission if you are not familiar with the game. When MANUAL SHIFT is chosen, refer to the Tachometer for shifting. Shifting up when the indicator is just below the red zone allows the most efficient acceleration.

  • After the course and transmission have been selected, the race begins with a rolling start.
  • During play, the driver’s perspective can be alternated by using the View Change Buttons to select one of 4 views.
  • To disable the Steering Wheel reactions, press the View Change Zoom Out and Start Buttons simultaneously.
  • The on-screen indicators during a race are shown in Figure 17 and described in Table 4.
Page 23

Table 4: On-Screen Indicators LOCATION | INDICATOR(S) Upper Left | Player’s current numerical position in the field over total field size. | Upper Middie | Remaining time to the next checkpoint. Upper Right Section time between checkpoints, with the best section time to date displayed above the player’s Jast section time. Middle Left Record Lap time for the current lap, the running Total Time, and the Lap Times for all completed laps, and the current running Lap Time. Middle Right | Course Map with markers for all cars in the field (purple dots), player’s present position (blue triangle), and leader’s position (green diamond). Tachometer (green bar) with Shift Indicator (red bar), Current Speed, and Current Gear (number and bar). Lower Right

  • After the game is started, the allotted time decreases. Passing the 1 to 3 checkpoint(s) per lap (depends on the course selected) within the time limit allows the game to continue with the previous remaining time added to the time limit up to the next checkpoint. If you fail to pass a checkpoint within the allotted time limit, the game is over.
  • During play, the position of all on-screen cars in the race can be viewed by pressing the Start Button. Press the Start Button again to return to the default view.
  • The top ten players who finish the course with the best results can register his or her name. Turn the steering wheel to choose the alphabetical letters and step on the Accelerator to make the selection. The name will be displayed on the DEMO screen.

Steering Wheel Shift Lever Start Button

View Change Button Red: ZOOM IN Blue: ZOOM OUT Brake Pedal Accel. Pedal

Ficure 18: Controt Locations

Page 24

EXPLANATION OF TEST AND DATA DISPLAYS

-Test Move ScHeputinc

The machine should be tested whenever it is installed, when cash is collected, monthly, or whenever the machine is not operating correctly. This is done by pressing the Test Button on the Service Panel. The tests and modes listed in Table 5 should be used as applicable.

TABLE 5. EXPLANATION OF TEST MODES ITEMS DESCRIPTION INSTALLATION OF MACHINE | When the machine is installed, perform the following:

  • Check to see that each setting is per the manufacturer’s default setting, made at the time of shipment.
  • In the Input Test, check each switch and control.
  • In the Output Test check each of the lamps.
  • In the Memory and T.G.P. Tests, check ICs. MEMORY Choose Memory or T.G.P. Test to allow the memory test to be performed. In these tests, PROGRAM RAMs, ROMs, and ICs on the IC Board are checked. PERIODIC SERVICING Periodically perform the following:
  • Memory and T.G.P. Tests.
  • Ascertain each setting.
  • In the Input Test, test the control devices. 4, In the Output Test, check each of lamps, CONTROL SYSTEM 1. In the Input Test, check each switch.
  • Adjust or replace each switch.
  • If the problem can not be solved yet, check the control’s motion. MONITOR 1, In the C.R.T. Test, check to see if the monitor adjustments are appropriate.
  • Demagnetize monitor using degauss switch on Service Panel. IC BOARD 1, Memory Test.
  • Sound Test. DATA CHECK. Check such data as game play time and histogram to adjust the difficulty level, etc.
IMPORTANT! Be sure to exit from the Test Menus before turning off power to the machine. If power is turned off while in the Test Menus, the new settings will not be stored correctly.
Page 25

SERVICE PANEL

The Service Panel (see Figure 19) is located behind the Coin Mech Door (see Figure 30). The functions of each control on the Service Unit are described in Table 6. The left- and right-side Service Panels function independently.

LEFT

COIN METER COIN METER

6 © © ® LEFT CONTROLS

RIGHT CONTROLS 6 © © ®@

Ficure 19: Service PANEL CONTROLS AND INDICATORS

TABLE 6: SERVICE PANEL FUNCTIONS CONTROL FUNCTION Gives credits without registering on the appropriate coin meter. Service Button

Also used to select test items (see next sections). Enters and runs tests in the Test Menu.

For details on the use of the Test Button, see next sections. Test Button

Volume Knob Adjusts the volume of the left- and right-side speakers. Volume increases when knob is turned clockwise.

Registers coins accepted for play in left- and right-side coin slots. Coin Meter

Degauss Button Corrects color impurity in the left- and right-side CRTs.

Page 26

Test Menu

This menu allows selection of other menus that check the operation of the game board, make monitor color adjustments, and allow for COIN ASSIGNMENTS and GAME ASSIGNMENTS setting adjustments. Each of the Test Items is more fully explained in the following sections.

TEST MENU

MEMORY TEST

T.G.P. TEST INPUT TEST OUTPUT TEST SOUND TEST C.R.T. TEST GAME ASSIGNMENTS COIN ASSIGNMENTS

VOLUME SETTING BOOKKEEPING BACKUP DATA CLEAR

> EXIT

SELECT BY SERVICE BUTTON AND PUSH TEST BUTTON

  • Push the Test Button on the Service Panel to cause the Test Menu to appear. Do not enter Test Mode if any linked

units are in play. All linked units will enter Test Mode at the same time.

  • Push the Service or View Change Buttons to move the cursor © to the desired item and press the Test Button.
  • When all testing is completed, move the cursor © to EXIT and push the Test Button. Be sure to exit from Test Mode before turning off power to the machine. If power is turned off before exiting Test Mode, the new settings will not be saved properly.
IMPORTANT!

Do not enter the Test Mode if any linked machines are in play. Entering Test Mode causes all linked machines to enter Test Mode. Be sure to exit from Test Mode before turning off power to the machine. If power is turned off while in Test Mode, the new settings will not be stored correctly.

Page 27

Memory TEST

Check the on-board memory ICs.

MEMORY TEST

GOOD

Ic11_GOOD[C12GOOD
Ic9_GOODIc10GOOD
IC7_GOODIc8GOOD

<RAM>

IC14GOODIC15GOODIC16GOODC17GOOD
1c18GOODIc19GOOD
Ic98GOODIC150 GOOD
Ic79_GOOD{C80GOOD
{C81GOODIC83.GOODIC82GOODIC84GOOD
IC88GOODIC89_GOOD
Ic91GOODIc92_GOOD1C93GOOD
Ic27GOODIc29GOODIC28GOODC30GOOD

a,

  • The test takes approximately 75 seconds to complete. If the test exceeds 75 seconds, the board may have PRESS TEST BUTTON TO EXIT

malfunctioned.

  • When the IC is in good operating condition, “GOOD” will be indicated.
  • If any of the ICs are malfunctioning, “BAD” will be indicated.
  • Push the Test or Start Button to return to the Test Menu.
Page 28

T.G.P. Test

Check the on-board T.G.P. (screen display) ICs.

T.G.P. TEST

IC31 GOOD (C37 GOOD

PRESS TEST BUTTON TO EXIT

  • When the IC is in good operating condition, “GOOD” will be indicated.
  • If any of the ICs are malfunctioning, “BAD” will be indicated.
  • Push the Test or Start Button to return to the Test Menu.
Page 29

Input Test

This test displays the state of each switch or button and the value of each control, and allows each switch, button, and control to be individually tested.

INPUT TEST

STEERING WHEEL 80H GAS PEDAL 30H BRAKE PEDAL 30H

SHIFT UP OFF SHIFT DOWN OFF VIEW 1 (ZOOM IN) OFF VIEW 2 (ZOOM OUT) OFF START OFF COIN CHUTE #1 OFF COIN CHUTE #2 OFF SERVICE OFF TEST OFF

PRESS TEST BUTTON TO EXIT TD

  • Operate each control (steering wheel, gas pedal, and brake pedal). If the values shown range as listed in Table 7, the control is operating satisfactorily.
  • Press each switch or button. If the indicator goes ON when the button is activated, the button is operating and the wiring connections are satisfactory.
  • To check Coin Chutes #1 and #2, open the Coin Chute Door and insert a coin in the slot. 4, Push the Test Button (or the Start and View Change Buttons simultaneously) to return to the Test Menu.

Table 7: CONTROL VALUE RANGES

POSITION VALUE RANGE

Left Under 2DH Right TDH to 83H

Centered Over D3H

Released Under 30H Pressed Down Over COH Released Under 30H Pressed Down Over COH

Page 30

Output TEstT

Allows the Steering Wheel’s centering value and the status of each lamp to be checked.

; / >) OUTPUT TEST

CENTERING LEVEL 0

START LAMP OFF VIEW 1 LAMP (ZOOM IN) OFF VIEW 2 LAMP (ZOOM OUT) OFF

=> EXIT

SELECT WITH SERVICE BUTTON \ AND PRESS TEST BUTTON yy

1, Press the Service Button or the View Change Buttons to move the cursor © to the desired test item.

  • Each time the Test Button or Start Button is pressed while CENTERING LEVEL is selected, the CENTERING LEVEL changes in 9 steps (0 to 8 : None to Strongest).
  • If the Steering Wheel’s reaction strength cannot be set satisfactorily using this menu, the Drive Board DIP switch settings may need to be changed. See the Service Information: Drive Board DIP Switch Settings section. 4, Lamps should light and the on-screen display should read “ON” when the Test Button is pressed while the corresponding menu item is selected. Press the Test Button again to turn the lamp off and the on-screen display to “OFF”.
  • Select EXIT and press the Test Button or Start Button to return to the Test Menu.
Page 31

Sounp Test

This allows each sound and speaker to be verified, Voice and background music (BGM) are emitted from the two round tweeter speakers located one on each side of the control panel, and from the front square speakers also located one on each side of the control panel. Be sure to verify that sound is emitted from each speaker at a satisfactory volume.

SOUND TEST

NO. 0

SELECT WITH SERVICE BUTTON PRESS TEST BUTTON TO EXIT

  • Press the Service or View Change Buttons to choose and play the desired sound (No. 0 to 111).
  • Press the Test Button to return to the Test Menu.
Page 32

C.R.T. Test

The two C.R.T. Test screens (RGB Color Adjustment and Monitor Size Adjustment) allow verification of the CRY’s adjustment. Although projector adjustments are made at the time of shipment, color deviation or other maladjustments may occur due to geomagnetism, other game machinery, or other factors. View the test screens and make a judgment as the whether adjustments are necessary. If adjustments are necessary, make them according to the instructions given in the Service Information section.

RGB Co or AbsustMent SCREEN This screen allows for checking and adjusting the monitor color.

C.R.T. TEST

PRESS TEST BUTTON TO CONTINUE

1, View the test screen and decide whether adjustments are necessary.

  • Normally, there is no need to make adjustments.
  • If adjustments are necessary, make them according to the instructions given in the Service Information section.
  • If adjustments are necessary, make them so that each of the R (red), G (green) and B (blue) colors is darkest at the left-hand end and becomes brighter in 16 gradations towards the right-hand end. The monitor brightness is satisfactory if the white color bar is black at the left-hand end and white at the right-hand end.
  • Press the Test or Start Button to go to the Monitor Size Adjustment screen.
Page 33

Monrror Size ApjustMENT SCREEN This page allows the monitor size to be checked.

  • View the test screen and decide whether adjustments are necessary.
  • Normally, there is no need to make adjustments.
  • If adjustments are necessary, make them according to the instructions given in the Service Information section.
  • If adjustments are necessary, make them so that the checkered portions of the display do not go beyond the edges of the screen and there is no crosshatch distortion.
Page 34

GAME ASSIGNMENTS

Allows game settings to be changed. Ranges are shown in parentheses (). Default values are shown by * =.

{ GAME ASSIGNMENTS >

GAME DIFFICULTYNORMALA

RACE MODE NORMAL B

HANDICAPONc
ADVERTISE SOUNDOND
COUNTRYUSAE

CABINET TYPE TWIN F

NETWORK TYPE.NOT LINKG
CABINET ID1H
ENGINE VOLUME1|
DEFAULT VIEW1J

> EXIT

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON }

  • Press the Service or View Change Buttons to move the cursor = and bring it to the desired item.
  • Press the Test or Start Button to change the setting.
  • After the desired setting is selected, bring the cursor © to EXIT and press the Test Button.

(A) GAME DIFFICULTY * = NORMAL Sets the game’s overall difficulty (WERY EASY, EASY, NORMAL, HARD, HARDEST).

(B) RACE MODE * = NORMAL Sets the lap length per Table 8 (NORMAL, LONG).

Table 8: Race Mode Lap Lengths INDY 500 HIGHLAND | BAY SIDE | Normal 4 Laps 3 Laps Long 20 Laps 15 Laps

(C) HANDICAP * =ON Speeds up the cars that are in position No. 2 or lower (all cars except position No. 1) in linked play (ON, OFF).

(D) ADVERTISE SOUND *=ON Determines whether ADVERTISE SOUND is to be emitted or not during Standby Mode (ON, OFF).

(E) COUNTRY *=USA Selects message language (JPN, EXP, USA).

Page 35

(F) CABINET TYPE *=TWIN Setting of cabinet type (DELUXE, TWIN).

(G) NEFWORK TYPE * = STAND ALONE When machines are not used interactively, set all machines to STAND ALONE. For linked (communication) play, set CABINET ID #1 to MASTER, and the remaining cars to SLAVE, as described in the Machine Options section

  • Linking Instructions (STAND ALONE, MASTER, SLAVE).

(H) CABINET ID *=1 When cabinets are used in linked play, the CABINET ID’s must be set as described in the Machine Options section

  • Linking Instructions or the on-screen displays will be confused (1 to 8).
  • ENGINE VOLUME to] Sets the balance between the sound levels of the engine and the background music during the race, as shown in Table 9. (1 to 3).

Table 9: Sound Level Settings

(J) DEFAULT VIEW eo] Sets the default view seen before any View Change Buttons are pressed during the race (1:Lowest View Point to 4:Highest View Point).

Page 36

Con ASSIGNMENT

In this mode, the COIN/CREDIT setting, number of credits to start, and basic coin and credit levels can be changed. Default values are shown by * =,

Comn/Crepit

{ COIN ASSIGNMENT

COIN/CREDIT SETTING #18 A COIN CHUTE #1 4 COINS 1 CREDIT

COIN CHUTE #2 4 COINS 1 CREDIT

MANUAL SETTING B > EXIT

SELECT WITH SERVICE BUTTON \ AND PRESS TEST BUTTON }

  • Press the Service Button or View Change Button to select an item.
  • Press the Test Button or Start Button to change the setting.
  • To activate the change, select EXIT by using the Service Button, and press the Test Button.

(A) COIN/CREDIT SETTING *= 18 Sets the CREDIT increase increment per coin insertion. There are 27 settings from #1 to #27, expressed in 00 CREDIT against 00 COINS inserted. #27 refers to FREE PLAY (SETTING #1 in the default setting). For details, refer to Table 10.

(B) MANUAL SETTING The CREDIT’s incremental increase settings for each coin insertion are shown in further detail in Tables 11 - 13.

Note: When MANUAL SETTING is selected, the COIN/CREDIT setting (A) becomes ineffective.
Page 37

TABLE 10: COIN/CREDIT SETTINGS

NAME OF SETTINGCOIN CHUTE 1COIN CHUTE 2
SETTING #11 COIN1 CREDIT1 COIN1 CREDIT
SETTING #21 COIN2 CREDITS1 COIN1 CREDIT
SETTING #31 COIN3 CREDITS1 COIN1 CREDIT
SETTING #41 COIN4 CREDITS1 COIN1 CREDIT
SETTING #51 COIN5 CREDITS1 COIN1 CREDIT
SETTING #61 COIN2 CREDITS1 COIN2 CREDITS
SETTING #71 COIN,5 CREDITS1 COIN2 CREDITS
SETTING #81 COIN3 CREDITS1 COIN3 CREDITS

SETTING #9 4 CREDITS

SETTING #101 COIN5 CREDITS
SETTING #111 COIN6 CREDITS

SETTING #12

SETTING #13 1 COIN 1 CREDIT

2COINS _1CREDIT 2COINS 1 CREDIT

SETTING #14TCOIN2 CREDITS2COINS_1 CREDIT
SETTING #15TCOIN1 CREDITTCOIN1 CREDIT
2COINS3 CREDITS2COINS3 CREDITS
SETTING #161COIN3CREDITS1COIN3 CREDITS

2COINS 3 CREDITS

SETTING #173COINS1 CREDIT3COINS1 CREDIT
4COINS1 CREDIT4COINS1 CREDIT
SETTING #191COIN1 CREDIT1COIN1 CREDIT
2COINS2CREDITS2COINS2CREDITS
3COINS3CREDITS3COINS3CREDITS
4COINS_5 CREDITS4COINS5 CREDITS
SETTING #201COIN5 CREDITS1COIN1 CREDIT

2COINS 2CREDITS 3COINS 3CREDITS 4COINS _5 CREDITS

SCOINS_1 CREDIT5 COINS_1 CREDIT
SETTING #221COIN2 CREDITS3COINS1 CREDIT

SCOINS 2 CREDITS

SETTING #232COINS1 CREDIT2COINS1 CREDIT
4COINS2CREDITS4COINS2CREDITS
SCOINS3 CREDITSSCOINS3 CREDITS
SETTING #241COIN3CREDITS2COINS1 CREDIT

4COINS 2CREDITS SCOINS 3 CREDITS

SETTING #251COIN1CREDIT1COIN1 CREDIT
2COINS2CREDITS2COINS2CREDITS
3COINS3 CREDITS3COINS3 CREDITS
4COINS4CREDITS4COINS4CREDITS
SCOINS_6 CREDITSSCOINS _ 6 CREDITS
SETTING #261COIN1 CREDIT1COIN1 CREDIT

2COINS 2CREDITS 3COINS 3 CREDITS 4COINS 4CREDITS SCOINS 6 CREDITS

SETTING #27 FREE PLAY FREE PLAY

Page 38

MANnuaL SETTING In this mode, the COIN/CREDIT, BONUS ADDER, AND COIN CHUTE settings, etc. can be changed independently.

COIN ASSIGNMENTS

MANUAL SETTING

COIN TO CREDIT 3 COINS 1 CREDIT

BONUS ADDER NO BONUS ADDER B

COIN CHUTE #1 MULTIPLIER

1 COIN COUNTS AS 1 COIN Cc

COIN CHUTE #2 MULTIPLIER 1 COIN COUNTS AS 1 COIN

SELECT WITH SERVICE BUTTON

AND PRESS TEST BUTTON

(A) COIN TO CREDIT

Determines Coin/Credit setting. See Table 11.

(B) BONUS ADDER Sets how many coins should be inserted to obtain one Service Coin. See Table 12.

(C) COIN CHUTE #X MULTIPLIER

Sets how many tokens one Coin represents for COIN CHUTEs #1 and #2. See Table 13.

Page 39

TABLE 11: MANUAL SETTINGS: COIN TO CREDIT

COIN TO CREDIT

1 CREDIT

1 CREDIT 2 COINS

3 COINS

4 COINS 5COINS _ 1 CREDIT

7COINS _1CREDIT 8 COINS _ 1 CREDIT 9COINS _1 CREDIT

TABLE 12: MANUAL SETTINGS: BONUS ADDER BONUS ADDER INO BONUS ADDER

. 2 COINS GIVE 1 EXTRA COIN

3 COINS GIVE 1 EXTRA COIN

14 COINS GIVE 1 EXTRA COIN

5 COINS GIVE 1 EXTRA COIN

TABLE 13: MANUAL SETTINGS: COIN CHUTE #X MULTIPLIER

COIN CHUTE

1 COIN COUNTS AS 5 COINS.

1 COIN COUNTS AS 8 COINS

1 COIN COUNTS AS 9 COINS

Page 40

Controi RANGE (“VOLUME”) SETTING

Allows the Control Range (“Volume”) of the Gas and Brake Pedals and Steering Wheel to be adjusted.

VOLUME SETTING

STEERING WHEELMAX 93 (DF)MIN 93 (26)NEW 93 (93)
GAS PEDALMAX 78 (CO)MIN 78 (78)
BRAKE PEDALMAX 3E (C5)MIN 3E (3E)

=> CANCEL & EXIT SET & EXIT

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

  • To set the Steering Wheel or Pedal (Gas or Brake) values, bring the cursor “Set & Exit”.
  • To cancel, bring the cursor “Cancel & Exit”. Note: if the Steering Wheel or either Pedal is moved even the slightest while you are in this menu, all the settings will be erased. Sega recommends that all settings be reset anytime this menu is entered.
  • Step on the Gas or Brake Pedal fully, then release completely.
  • Turn the Steering Wheel fully to the left and right (see Figure 20) and allow the Steering Wheel to return to level center, as shown in Figure 21.
  • Press the Test Button to store values and return to the Test Menu.

SS

Level Line

Ficure 20: TuRNING THE STEERING WHEEL Ficure 21: CENTERING THE STEERING WHEEL

CAUTION

Sega recommends that all settings be set anytime this menu is entered.

Page 41

BOOKKEEPING

The two Bookkeeping screens (Credits and Times and Time Histograms) allow display of the game’s lifetime bookkeeping data.

Creprts AND Times

BOOKKEEPING 1/2

COIN CHUTE #1 COIN CHUTE #2 TOTAL COINS COIN CREDITS SERVICE CREDITS TOTAL CREDITS NUMBER OF GAMES TOTAL TIME OD OH OM OS PLAY TIME OD 0H OM OS AVERAGE PLAY TIME OH OM OS LONGEST PLAY TIME OH OM OS SHORTEST PLAY TIME OH OM OS ooocoooo°o —_PrAWTMUOG

PRESS TEST BUTTON TO CONTINUE

  • Press the Test Button to proceed to the next page (Time Histograms screen).

(A) COIN CHUTE #1 and #2

Displays the number of coins inserted in COIN CHUTE #1 or #2. From the front of the cabinet, the left-hand side coin chute is Chute #1, and the right-hand side coin chute is Chute #2.

(B) TOTAL COINS Total number of times both the COIN CHUTES have been actuated.

(C) COIN CREDITS Number of CREDITS registered by COIN insertion only.

(D) SERVICE CREDITS Credits registered by Service Button usage.

(E) TOTAL CREDITS Total number of CREDITS registered (COIN CREDITS + SERVICE CREDITS).

Page 42

(F) NUMBER OF GAMES Total number of games played.

(GYTOTAL TIME Time available for play (excludes time in Test Mode).

(H) GAME PLAY TIME Total time games were being played (part of the TOTAL TIME; remainder of TOTAL TIME is spent in ATTRACT MODE).

  • AVERAGE GAME TIME The GAME PLAY TIME divided by the NUMBER OF GAMES.
Page 43

Time HistoGRaM

Count of the length of each game played in 30 second intervals.

  • / BOOKKEEPING 2/2

TIME HISTOGRAM OM 00S ~ OM 29S OM 30S ~ OM 59S 1M OOS ~ 1M 29S 1M 30S ~ 1M 59S 2M OOS ~ 2M 29S 2M 30S ~ 2M 59S 3M OOS ~ 3M 29S 3M 30S ~ 3M 59S 4M OOS ~ 4M 29S 4M 30S ~ 4M 59S OVER 5MOO0S

\ PRESS TEST BUTTON TO EXIT eo0000000000

  • Press the Test Button to return to the Test Menu.
Page 44

Backup Data CLEAR

Clear the contents of BOOKKEEPING. Does not affect the Game Assignment settings.

BACKUP DATA CLEAR

YES (CLEAR)

=> NO (CANCEL)

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

  • When clearing, bring the cursor > to YES; and when not clearing, to NO, by using the Service Button, and then pushing the Test Button.
  • When clearing is finished, “COMPLETED” will be displayed.
  • Press the Test Button to return to the Test Menu.
Page 45

PERIODIC CHECK

The periodic check and maintenance of the items listed in Table 14 is suggested to retain the performance of this machine and to ensure safe operation.

TABLE 14: PERIODIC CHECK AND MAINTENANCE ITEMS ASSEMBLY ACTION ITEM INTERVAL

CONTROLCheck Button lampsMonthly|

Check VOLUME VALUE {| Monthly Check ADJUST GEAR Monthly Check GEAR GREASING| Monthly Check BEARING Monthly

OVER/UNDER COIN DOOR ASSEMBLY |Check COIN SWITCHMonthly

Clean COIN SELECTOR | Tri-Monthly

MONITOR,Check ADJUSTMENTSMonthly

[GAME BOARD Run MEMORY TEST Monthly

INTERIOR CLEAN Annually

POWER SUPPLY PLUGCHECK and CLEANAnnually

SEAT Grease RAIL | Trimonthly al

Page 46

TROUBLESHOOTING

  • The items listed in Table 15 will assist in troubleshooting when a problem occurs. As a first step, check all wiring connector connections and verify AC power to the machine.

TABLE 15: TROUBLESHOOTING GUIDE

PROBLEMS COUNTERMEASURES When the main SW is turned ON, the machine is not activated. The cord is not plugged in. Power switch is off.

Incorrect power source/voltage.

Fuse is blown. Firmly insert the plug into the outlet. Turn on the cabinet.

Make sure that the power supply voltages are correct. First, remove the cause of overcurrent and replace the fuse. Fuse: 12A 250V Slo Blo. MONITOR screen is blackened and the fluorescent lamp does not light

up. Fuse is blown. First remove the cause of

overcurrent, then replace the fuse. Fuse: 12A 250V Slo Blo. The color of image on MONITOR screen is incorrect. Defective connections between

boards. Make sure of correct connections

between boards. The on-screen image of the monitor sways and/or shrinks. Incorrect monitor adjustment. The power source and voltage are not correct. Make appropriate adjustments Make sure that the power supply and voltage are correct. Control panel controls are not operating satisfactorily. Controls or Button microswitches

malfunctioning. Power-on check not performed properly. Adjust or replace microswitches.

Turn off unit and turn on again. Allow power-on check to complete. Fluorescent lamps don’t light up. Fluorescent lamps need replacement. The connector is disconnected.

Sound is not emitted. Replace the fluorescent lamp. Check connector connections in the

billboard.

Fuse is blown.

Sound volume adjustment is not correct. Game makes sounds, but has no picture. Malfunctioning of sound board and/

or memory. Interactive play is not working. Linking cable is disconnected. Linking cable connections are incorrect.

Game settings for linked play are not

correct. Replace fuse: 12A 250V Slo Blo. Adjust the Service Panel’s volume control knob.

Perform the SOUND TEST.

Connect the cable. Connect the cable correctly see Machine Options: Linking Instructions section.

Reset the Game Assignments - see Machine Options: Linking Instructions section.

Page 47

MACHINE OPTIONS

Luvxinc INstrucTIONs

This machine can be linked to similar machines to allow up to eight (8) people (four Indy 500 Twin cabinet sets) to race on the same course. Setting up LINKING requires modifications to the Assembly, Game Assignment and Network Assignments Settings, and Playing Instructions, as described in the following three sections.

ASSEMBLY

  • Due to the length of the fiber optic communications cables, connected machines must be located within 12 feet of each other.
  • For four players, link the machines as shown in Figure 23 (four players), using the fiber optic cable found coiled inside each machine’s Cash Box Tower.
  • The user only connects the external fiber optic cabling. The internal cabling is configured at the factory.
  • The cable and machine linking connectors are keyed so that they can only be connected when the longest flat side of the cable connector is facing up (see Figure 22).
  • At the center rear of the MASTER machine (cabinets 1 and 2), insert the black end of the linking cable into the TX connector and the red end into the RX connector.
  • To link additional machines, add SLAVE machines

(cabinets 3,4,5,6,7, and 8), connecting TX outputs to RX inputs, as shown in Figure 24 (six players) and Figure 25 (eight players).

  • Loop and tuck the excess fiber optic cable between the left- and right-side cabinets. Do not bend the fiber optic cable.
  • Apply Seat Number stickers to back of each seat, starting from the left-side cabinet of the MASTER cabinet and proceeding to the right (see Figure 26).

Ficure 22: Finer Optic CaBLe CONNECTOR

CABINET ID 1 CABINET ID 2 CABINET ID 3 CABINET ID 4

Figure 23: Four PLAYER LINKING DiaGRAM

Page 48

CABINET ID 1 CABINET ID 2 CABINET 1D 3 CABINET ID 4 CABINET ID 5 CABINET ID 6 Ficure 24: Six PLayer LinkING DiAGRAM

CABINET ID 1 CABINET ID 2 CABINET ID 3 CABINET ID 4 CABINET ID 5 CABINET ID 6 CABINET ID 7 CABINET ID 8 Figure 25: EiGhtT PLAYER LINKING DIAGRAM

Ficure 26: Sear NUMBERING DIAGRAM

Page 49

Game SysTEM SETTINGS

For each linked cabinet, press the Test Button on the Service Panel and modify the Network Assignments menu as shown below. When changing settings, refer to the Test Mode section.

  • Press the Test Button to enter the Test menu and choose NETWORK ASSIGNMENTS (see Figure 27).
  • Bring the cursor > to COMMUNICATION and press the Test Button to select NETWORK (see Figure 28).
  • Move the cursor to PRIVILEGE MODE and press the Test Button to allow one of the cabinets to be set to

MASTER. Set all other cabinets to SLAVE.

4, Bring the cursor to CABINET ID NUMBER, press the Test Button, and set the machine numbers sequentially (1, 2, 3, ... 8) as applicable, starting from the extreme left cabinet, facing the front of the monitors (matching the seat numbers). If the same number is set for two or more cabinets, or if the sequential order is incorrect, the game display will be confused.

  • In the case of linked play, the Game Assignments settings are made on the MASTER cabinet. Even if the settings are changed on the SLAVE machines, the settings will not be effective. Changing the settings on the MASTER cabinet causes all of the SLAVE machines to change the to MASTER unit’s settings.
  • All linked machines perform a NETWORK CHECK (see Figure 29) when the power is turned on, and when exiting the Test Menu. Linked play is not possible unless all of the linked machines simultaneously perform a NETWORK CHECK. Should testing become necessary for one machine, all of the remaining machines will be tested. When testing is finished for the machine which required testing, all of the machines will exit from the Test Menu at the

same time.

NETWORK ASSIGNMENTS

COMMUNICATION STAND-ALONE

© EXIT

SELECT BY SERVICE BUTTON AND PUSH TEST BUTTON

Fiure 27: NETWORK ASSIGNMENTS SCREEN — STAND-ALONE Mope

NETWORK ASSIGNMENTS

COMMUNICATION NETWORK

PRIVILEGE MODE MASTER

CABINET ID NUMBER

> EXIT

SELECT BY SERVICE BUTTON AND PUSH TEST BUTTON

Ficure 28: Network ASSIGNMENTS SCREEN — LINKED MASTER CABINET

Page 50

CHECKING NETWORK NOW CHECKING NETWORK NOW Ver. X.XX Ver. X.XX

Network Checking ! Network Checking !

Ficure 29: NeTworK CHECKING SCREENS

PLayING INSTRUCTIONS Most of the instructions in the HOW TO PLAY section apply to linked or unlinked machines, with the following

exceptions:

  • The player at the MASTER machine should insert a coin first, and press the start button. A message “WAITING FOR YOUR ENTRY” will appear on the remaining linked machine’s monitors.
  • Within 14 seconds, each linked machine player who desires to compete must insert a coin in their coin slot.
  • Each player should select the course that they wish to compete on. Ties will be decided as discussed in the How To Play section.
  • Shift selection is made independently on each machine.
  • After AUTO or MANUAL shift has been selected, the race begins.
Page 51

PARTS LIST

INDY 500 TWIN GRAPHICS

Ficure 30: Inpy 500 Twin Grapuics

Page 52

INDY 500 TWIN GRAPHICS Table 16: Indy 500 Twin Graphics Parts List NO. PART NO. [PTION

1DYN-0010DENOMI PLATE
-2DYN-0011DENOMI PLATE W/O ORIGINAL
54230-0250BILLBOARD PLATE UPPER
64231-0251BILLBOARD PLATE LOWER
104220-0537-01SUB INSTR SH INDY
114220-0540-01PLAY INSTR SH INY TWIN
12421-8768STICKER METER PANEL
13INY-1251-BSHEET VR SW
16INY-1203-BSHEET EMBLEM
17Silkscreen on panelSTICKER SIDE 1P L
18Silkscreen on panelSTICKER SIDE 2P R
19INY0-2001-BSTICKER BASE L
20INY0-2001-CSTICKER BASE R
21INY1-1604-BSTICKER 1P
22INY1-1607-ASTICKER 2P
23INY1-1604-CSTICKER SEAT L
24INY1-1604-DSTICKER SEAT R
254210-8935STICKER INDY CAR No. “2-8” (for use with linked machines)
264400-WS0002-EGSTICKER “POWER OFF”
274400-CS0011-EGSTICKER “GRIP HANDLE”
28999-0505STICKER SEAT LOWER
Page 53

INDY 500 TWIN ASSEMBLY P/N INY-00001 Left-side Cabinet Right-side Cabinet

Billboard

Marquee

Speaker, Mini Dome (4) 130-5140 Speaker, Tweeter (4)

Monitor (2)

Over/Under Coin Door and Cash Box (between cabinets)

Underseat Speaker, _~ Casters (8) Woofer (2) ~\ Levelers (8) 999-0169 130-5114 999-0167

Ficure 31: Inpy 500 Twin CaBINET ASSEMBLY

Page 54

BILLBOARD ASSEMBLY P/N INY1-0200

Table 17: Billboard Parts List NO. PART NO. 1 INY1-0210 2 INY1-0220 3 RAL1-0201 4 RAL1-0202 Ficure 32: BILLBOARD ASSEMBLY

DESCRIPTION ASSY BILLBOARD UPPER ASSY BILLBOARD LOWER LAMP LID STAY BRKT

Page 55

BILLBOARD UPPER ASSEMBLY P/N INY1-0210

Ficure 33: BILLBOARD UPPER ASSEMBLY

Table 18: Billboard Upper Parts List

NO.PART NO.DESCRIPTION
1RAL1-0211BILLBOARD CASE UPPER
2RAL1-0212CORNER EDGE UPPER
3RAL1-0213CORNER EDGE LOWER
4RAL1-0214CORNER EDGE LEFT
5RAL1-0215CORNER EDGE RIGHT
64230-0250BILLBOARD PLATE UPPER

7 STICKER FL 40W 101 ASSY FL 40W EX W/CONN HIGH 102 CORD CLAMP @21

Page 56

BILLBOARD LOWER ASSEMBLY P/N INY1-0220

_ \ / ———————————— =— Ms \ \ \ \

Ficure 34: BItLBoarD Lower ASSEMBLY

Table 19: Billboard Lower Parts List

NO.PART NO.DE:[ON
1RAL1-0221BILLBOARD CASE LOWER
2RAL1-0222CORNER EDGE
34231-0251BILLBOARD PLATE LOWER
4RAL1-0230LAMP UNIT

101 CORD CLAMP @21

Page 57

LAMP ASSEMBLY P/N RAL1-0230

Figure 35: Lamp ASSEMBLY

Table 20: Billboard Lower Parts List NO. PART NO. DESCRIPTION 1 RAL1-0231 LAMP PANEL 2 STICKER 110V 30W 101 BULB SOCKET 101 LAMP 110V 30W 101 PLASTIC TIE BELT 110MM 104 CORD CLAMP @10

Page 58

CONTROL PANEL ASSEMBLY P/N INY1-12002

FOR EARTH GROUND

TORQUE 200kgf-cm

Ficure 36: ContRoL PANEL ASSEMBLY

Page 59

CONTROL PANEL ASSEMBLY P/N INY1-12002 Table 17: Control Panel Parts List PART NO. DYN-1201 DYN-1209 INY-1203 INY1-1205 INY-1206-01 INY-1204 DYN-1223 INY-1250 OUT-2026 610-0383 6100-0384 130-5112 601-0460 280-5009 060-S00800 999-0418 008-T00512-0B 000-T00416 000-T00416-0C 000-P00412-W

008-T00516-0B 050-F00400 999-0419 DESCRIPTION STEERING WHEEL HANDLE COLLAR STEERING EMBLEM CONTROL PANEL BRACKET CONTROL PANEL COVER SHIFT COVER INDY SHIFT COVER B ASSY VIRTUAL BUTTON SPACER ASSY HANDLE MECHANISM W/MOTOR UP/DOWN SHIFTER TWEETER 8 OHM 2W @35 PLASTIC TIE BELT 100MM CORD CLAMP @21 SPR WSHR M8 NUT NYLOC M8 TMP PRF SCR TH BLK M5 x 12 M SCR TH M4 X 16 MSCR TH CRM M4 X 16 M SCR TH W/FS M4 X 12 SCR 4-40 X 1/4 SELF-TAPPING TMP PRF SCR TH BLK MS X 16 FLG NUT M4 FENDER WASHER

Page 60

START AND VIEW BUTTON ASSEMBLY P/N INY-1250

(RED) (BLUE)

Figure 37: Starr AND View Burron ASSEMBLY Table 18: Start and View Button Parts List NO. PART NO. INY-1251 171-6478B 212-5205-12 509-5560-Y 509-5561-R 509-5561-S DESCRIPTION VR SW BRACKET PC BD LIGHTING SWX5 CONN JST M 12P RTA PB SW WIL 6V ILY PB SW W/L 6V SLR PB SW WIL 6V SLS

Page 61

SHIFTER ASSEMBLY P/N 6100-0384

Ficure 38: SHIFTER ASSEMBLY

Page 62

SHIFTER ASSEMBLY P/N 6100-0384 Table 19: Shifter Parts List

NO.PART NO.DESCRIPTION
150-2981-00KNOB AND SHAFT
-250-2582-00SPRING FOR SHAFT
350-8392-00DELRIN PIN
450-1027-02SHIFTER PLATE
550-2983-00BRACKET. LEFT SIDE
650-1031-00RUBBER BUMPER (2)
750-2987-00METAL SPACER FOR BUMPER (2)
850-2986-00TRUNNION
950-8 118-00E-RING
1043-0292-00NUT, HEX NYLOCK M6 (4)
1150-2985-00BRACKET, RETURN TO CENTER
1250-2984-00BRACKET, RIGHT SIDE
1343-0110-00CAPSCREW, M6x40 HEX HD (2)
1443-0415-00CAPSCREW, M6x16 FLAT HD SOCKET (2)
1595-4276-00SWITCH ASSY. (2)
1643-0368-00SCREW, M2x12MM PHIL PAN HD (4)
1743-0367-00NUT, M2 HEX (4)
1880-3001-00FISH PAPER (2)
Page 63

GAS AND BRAKE PEDAL ASSEMBLY P/N DYN1-1300

Figure 39: GAS AND BRAKE PEDAL ASSEMBLY

Page 64

GAS AND BRAKE PEDAL ASSEMBLY P/N DYN1-1300 Table 20: Gas and Brake Pedal Parts List NO. PARTNO. 1 DYN1-130.

  • 2 BVG-1402 3 BVG-1403 4 BVG-1404 5 BVG4-1405 6 BVG4-1406 7 BVG-1407 8 BVG-1408 9 BVG-1418 10 BVG-1410 ll BVG-1411 12 BVG-1412 13 BVG-1413 14 BVG-1414 15 BVGI-1415 16 BVG-1416 7 BVG-1417 18 GLC-2122 19 RDM-1210 101 220-5373 102 601-6005 103 601-5943

206 use 069-0000A

210 use 065-E00600

214 DYN-1305 DESCRIPTION PEDAL BASE ACCEL PEDAL BRAKE PEDAL PEDAL COVER SWING ARMA SWING ARM B PUSH ROD PUSH PLATE RUBBER BUMPER PUSH ROD PIN LINK ROD TORSION SPRING ACCEL TORSION SPRING B RUBBER STOPPER PEDAL SHAFT SWING ARM STOPPER SPACER GEAR PLATE VR BRACKET VOL CONT B - 5K OHM ADJUST GEAR GEAR 20 @ 15 SCREW MS ZN 08-32 X 06 PH PN SCREW MS BO 08-32 X 12 PH PN NUT HEX M6, WASHER FL BO 11/16 X 11/32 X 3/32 WASHER SPLIT LOCK 13/16 X 1/2 X 3/32 WASHER SPLIT LOCK 1/4 WASHER SPLIT LOCK #8 E RING 05133-25 SET SCR 30 M3 X 06MM WASHER FL 1/2 X 7/32 X 1/16 WASHER FL 30 #8 FLT WASHER 12.2-22 X 0.5 E RING 05133-18

Page 65

SEAT ASSEMBLY

Table 25: Seat Parts List PART NO. INYO-1601 INY0-1602 DYN1-2081 DYN1-2082 999-0506 101 999-0443 oson-B Ficure 40: Seat ASSEMBLY

\CRIPTI UPPER SEAT LOWER SEAT SEAT FRAME TWIN SEAT BASE SEAT BACK COVER SEAT RAIL SET

Page 66

GAME BOARD SET

834-11995 rew (9 M3X55, using flat & spring washers MODEL2B-CRX MAIN BD COM

837-11996

Figure 41: Game Boarp Set ASSEMBLY

ROM BD INDY 500 TWIN (833 - 11995)

° Jo ry

1C35 tsouno«me ro] en]=] 22|_2smoha
ta] tasee=
MPR-18244alinantonealonENBN=
1634 (oun s)selscls\[s\jeqle-le\|eBoE S|BS52|
MPR-18243Eager)JE\ Te wpe) wey fegilgiaymt|
cgege\|s\eejsels\leSESE[SEje\|sea
Mpeo peasSsSSls \o\ESfesis\soslos)[eSls\los
132 Gowpear
MPR-18241ae= 3/24a of a oo} A] oD
1e31 (sou 0oagalzazmlamlaalaals also
EPR-18391oraSTEP A JA [emis ol. m2 of. 0]. 0
ongaay=gclzee[Se|erleclze

+ a Sls iisy s\ fs rie fs fe ils isi er a Oe ealoal \ I \ | ele! aloal-olaa

Sucuid\e\Saeclesjeseses

\ i een [ootteteecccccenc cana 0 eeeeeeeed © a

Ficure 42: ROM Boarp

Fest Butta, pervice Button, ph Birton, View Button, — celerator,, Brake, ‘Steering ;

iniStartView7Steering Wheel" s
SuperwooferTrecter xo2Ea cae Vie GeneSteering Whee!Reaction Motor

(ROTO/PROO),

lg38-11651838-11650-07833-11994/12361838-11967838-11966

EQ. PWR AMP ———GAME BD ORIVE [> MoTOR

LOWPASS. AMPINY TWINGABE EBo twinCONTROL BDDRIVE so

[ Nn

imaaiiend999-0319200-5242-24-04,"
&SR.CONN. BD.200-524 3-24

Leader Lamp << $5R. CO! MONITOR 29°

Ficure: 43: Inpy 500 Twin Flow Cuart

Page 67

GAME BOARD SET

[JD IPSw2 ge BEBE icon 958% leig

DRIVE CONTROL BD (838-11967) Ficure 44: Drive ConTROL BoARD

Po

i co C4

MOTOR DRIVE BD (838-11966) Figure 45: Motor Drive BoarD

Page 68

AC SECTION AND GAME BOARD ASSEMBLY Inter-Cabinet

Power Supply — Linking Connectors

  • 999-0102 ; 150 W Switching XT | Game Board Case

__ Inter-Cabinet Motor Drive Linking Connectors Board Steering Wheel Power Supply 999-0102 oped 150 W Switching XT Fast Blo g

<-—— Game Board Case

Shield Case

Ficure 47: SHIELD CASE AND Fuse Locations - UNDER MIDDLE FLOORBOARD

Page 69

AC SECTION AND GAME BOARD SET AC Fuse 12 A250 V Slo Blo

Transformer __ 5601-5260 100V7A 125V10A

Equilizer Board

SSR

Shield Case Motor Drive

Board

a Ficure 48: SHIELD Case AND Fuse Locations - UNDER ACCELERATOR AND BRAKE FLOORBOARD

Page 70

SERVICE INFORMATION

BriiBoarp Lamps REPLACEMENT

  • Turn off the game at the power switch and unplug the Indy 500 Twin game.
  • Remove the three screws along the front edge of the Billboard between the Billboard and the Race Leader Marquee.
  • Tilt the Billboard top section open toward the rear, as shown in Figure 49. 4, The lamps are located as shown in Figure 49.
  • Replace the Billboard’s fluorescent lamp with a 48 inch, 40 Watt fluorescent lamp.
  • Replace the Race Leader spot light(s) by lifting the Lamp Lid(s) and replacing the burned out bulb(s) with 110V, 30 Watt incandescent spot lamps.
  • Replace the Lamp Lid(s), if necessary
  • Tilt the Billboard top section back into place.
  • Replace the three screws back into the front edge.
CAUTION! Use caution when removing lamps, they may be very hot.

Figure 49: BILLBOARD Lamps REPLACEMENT

Page 71

Monrror SERVICE

Monitor Servicr CAvTIONS Before handling the monitors, be sure to read the following explanations and.comply with the caution/

warning instructions given below. Indicates that disregarding this warning may cause a potentially hazardous situation, which could result in death or serious injury.
WARNING

@ equipment is forbidden. Indicates that access to a specific part of the cause could A

& Indicates that disregarding this caution may a potentially hazardous situation, which Tesult in personal injury and/or material damage.

Indicates the instruction to disconnect a power connector or plug.

@ When performing such work as installing and removing the monitor, inserting and disconnecting the external connectors to and from monitor interior and the monitor, be sure to disconnect the power connec-' tor (plug) before starting the work, Proceeding the work without following this instruction can cause shock or malfunctioning.

WARNING: @ Using the monitor by converting it without obtaining a prior permission is not allowed, SEGA shall not be liable for any malfunctioning and accident caused by said conversion.

ary side and Secondary side SECONDARY SIDE (Chassis, CRT) The monitor's circuit which is divided into the Primary side and K Secondary side, is insulated. Do not touch the primary side, or

or malfunctioning, which is very dangerous. @ High-iension Voltage do not touch both the primary side and the secondary side simultaneously. Not following the instruction can cause shock

Some of the parts inside monitor are subject to high-tension voltage in excess of 20,000 volts and very dangerous. Therefore, be sure not to touch the monitor interior. Should soldering & paper wastes, etc. be

WARNING

and this is very dangerous. When making monitor adjustments, use a non-conductive driver and make adjustment without touching any part other than the Adjustment V. R. and knob. Also, be sure not to cause a short-circuit to the Primary side and Secondary side. If short-circuited, it may cause shock

mixed in the monitor interior, turn the power off so as not to cause malfunctioning or fire hazard.

DEMAGNETIZER_ ANODE CAP COIL PRIMARY SIDE MAIN BD

in

SECONDARY SIDE (Chassis, sheet metal work, CRT, etc.) a PLUG or CONNEC- TOR

Page 72

@ Connecting the CRT and PCB For combining the CRT and PCB, use the specified part No. to maintain the status of adjustments made at ‘CAUTION the factory. The anode of the CRT itself will be accumulatively charged as time elapses, generating hightension voltage which is very dangerous. The monitor should be used with the Chassis, CRT and PCB assembled. When repair, etc. is required at the time of malfunctioning, be sure to send it in an "as is assembled” condition. If these are disassembled, what's charged to said high tension voltage can be discharged, causing a very hazardous situation. Therefore, under no circumstances should it be disassembled. @ Static Electricity Touching the CRT surface sometimes causes you to slightly feel electricity. This is because the CRT surfaces are subject to static and will not adversely affect the human body. @ Installation and removal Ensure that the Magnetizer Coil, FBT (Fly-Back Transformer), Anode Lead and Focus Lead are not positioned close to the sheet metal work's sharp edges, etc, and avoid damaging the insulated portions so as not to cause shock and malfunctioning. (For the name of parts, refer to the above Figures).

Monitor ADJUSTMENT The monitor adjustment knobs are located inside the upper rear access panel, as shown in Figure 50. Remove the upper rear service panel to make adjustments to the monitor in conjunction with the CRT Test Menu. The function of each control is shown in Figure 51.

CAUTION! Do not operate adjustment knobs without a good reason. Monitor operates on HIGH VOLTAGE - use caution when adjusting. Use a plastic screwdriver when adjusting monitor.

Figure 50: Monrror ConTrois Location

Page 73

NANAO monitor: 200-524 2-2 4—0 4 (24K mode)

  • O©8OH 0 OODOODD RG GG BG BR HS HH HP VS VH VP R-GAIN | B-GAIN SS. Sw H. SIZE an | V. HOLD G-GAIN BRIGHT HHOLD V.SIZE —-V.POSI

@ R-GaIN @ GGA... @) B-GAIN @ BRIGHT..........Controls screen brightness. Controls colors.

Controls horizontal screen size.

Provides horizontal synchronization, i.e., controls right/left blurring of image.

Controls horizontal display position on screen.

-Controls vertical screen size. ©) V. HOLD.......... Provides vertical synchronization, i.e., controls up-down scrolling of image.

  • V. POST ........00- Controls vertical display position on screen.

Ss. SW. -Controls the visual quality. (Only applies to Nanao.)

A: Ordinary B: Super-sharpness

Ficure 51: NANao Monrror Controt FUNCTIONS

Page 74

UnperseaT CABINET ACCESS

The Indy 500 Twin’s Game Board Sets, DIP Switches, Power Supplies, Fuses, and Underseat Speakers are located in the left- and right-slide locked underseat cabinets.

OPENING THE UNDERSEAT CABINET

  • Turn off the game at the power switch and unplug the Indy 500 Twin game.
  • Place a sheet of cardboard or a cloth on the ground along the front edge of the game (behind the seat) to protect the seat from damage.
  • Remove the two #15 anti-tamper Torx screws (and washers) that secure the seat to the underseat cabinet. They are located just above the two locks on the opposing sides of the underseat cabinet (see Figure 52).
  • Unlock the two locks on opposing sides of the underseat cabinet (see Figure 52). The same key is used for both the locks on both the left- and right-side underseat cabinets.
  • Grasp the seat from the side, near the front of the base, not along the top of the seat area. Incline the seat (the hinge is at the back of the seat) away from the monitor.
  • Tip the seat slowly up and back until the seat’s back edge is resting on the protected ground (see Figures 52 and 53). Be careful not to catch or pinch your fingers between the seat and the monitor cabinet.
  • Remove the four anti-tamper Torx screws that secure the front floorboard to the cabinet.
  • Perform any necessary servicing - see Design Related Parts section for component locations, and subsequent sections for servicing information on speakers, fuses, DIP switches, etc.

INCLINE THIS CAREFULLY.

M5X12, black Ficure 52: UNDERSEAT CABINET ACCESS

Page 75

3)

M5X12, black

Ficure 53: UNDERSEAT Capinet Lip REMOVAL

CLOSING THE UNDERSEAT CABINET

  • Install the four anti-tamper Torx screws that secure the front floorboard over the game board and power supply.
  • Grasp the seat from the side, near the front of the base, not along the top of the seat area.
  • Tip the seat slowly up and forward until the bottom of the seat rests on the underseat cabinet top edge (see Figures 52 and 53). Be careful not to catch or pinch your fingers between the seat and the monitor cabinet.
  • Lock the two locks on opposing sides of the underseat cabinet (see Figure 53). The same key is used for both the locks on both the left- and right-side underseat cabinets.
  • Install the two #15 anti-tamper Torx screws (and washers) that secure the seat to the underseat cabinet. They are located just above the two locks on the opposing sides of the underseat cabinet (see Figure 53).
  • Plug the Indy 500 Twin game and turn on the power.
Page 76

REPLACING Fans anp Fuses

The fans, and AC and steering wheel fuses are located in the left-and right-side underseat compartments.

  • Open the underseat compartment on the affected side. See Figure 54 for fuse and fan locations.
  • To replace the AC fuse, remove the floor board and the Throttle and Brake panel on the affected side. Replace with a 12A 250V Slo Blo fuse.
  • The steering wheel fuse is located on the Amp board. Replace with a 7A 250V Fast Blo fuse.
  • The fan is located at the rear of the game board case.

Replace with a 4-inch, 12V DC fan.

  • Replace the Throttle and Brake assembly, the floorboard, and close and lock the underseat compartment.

LUBRICATING THE SEAT RAILS

The seat rails should be lubricated once every three

months.

  • Move the seat to the rearmost position (away from the monitor).
  • Apply spray lubricant to the portion shown in Figure 55.
  • Move the seat back and forth a few times to distribute

the lubricant evenly.

  • Clean up any overspray on the seat, floor, or other surfaces.

AC Fuse 12 A250 V Equilizer Board Slo Blo REPLACING THE UNDERSEAT SPEAKER

The underseat speaker is located in the underseat compartment lid.

  • Open the underseat compartment on the affected side.
  • Disconnect the underseat speaker cabling.
  • Close and lock the underseat compartment.
  • Remove the four bolts holding the seat to the underseat compartment lid.
  • Carefully lift the seat off the underseat compartment and set it on the floor.
  • Remove the six screws that hold the speaker case to the frame and replace the underseat speaker .
  • Replace the seat.
  • Open the underseat compartment and reconnect the speaker cabling.
  • Close and lock the underseat compartment.

a a,

Figure 55: LUBRICATING THE SEAT RaILs

Transformer 5601-5260 100V7A 12.5 v 10A i

Page 77

Drive Boarp DIP Swrrcu Setrincs

If the Steering Wheel Centering Level cannot be set satisfactorily using the Output Test menu, the Drive Board DIP switch settings may need to be changed.

  • Open the underseat cabinet on the same side as the effected steering wheel.
  • Remove the three slotted screws that secure the Shield Case lid and remove the lid (see Figure 56).
  • The Drive Board is located as shown in Figure 48, and the DIP switches are located as shown in Figure 57. 4, Change the settings‘on DIP switch 1, switches 1-3, per Table 22.
  • Leave the remainder of the DIP switches set as they were.
  • Replace the Shield Case lid and replace the three screws.
  • Close the underseat cabinet. 9, Set the variable values in the Control Range (“Volume”) menu.
  • Close the rear access panel.

DIPSW2 EPR- Ole (=)p1Psw1 te 18261 FIO)

DRIVE CONTROL BD (838-11967) Ficure 57: Drive Boarb DIP Swircu Locations Ficure 56: Drive Boarp Location

Table 22: Drive Board DIP Switch J Settings

NOTE: The shaded portion refers to the setting at the time of shipment.
Page 78

ACCELERATOR AND BRAKE GREASING, ADJUSTMENT, AND REPLACEMENT

If the Gas Pedal and Brake Pedal values cannot be set within the appropriate ranges in the Input Test menu, an adjustment of the accelerator or brake potentiometer is needed. If the accelerator or brake cannot be adjusted appropriately, the accelerator or brake potentiometers need to be replaced. The gears and shafts should be greased every three months. AbgusTING

  • The Indy 500 Twin game must be left plugged in and turned on. Exercise caution in using tools around the plugged-in game.
  • Open the lower rear service panel on the affected side. From the rear, the Brake is on the right, and the accelerator is on the left (see Figure 58).
  • Loosen the two screws that secure the potentiometer (V.R.) bracket, and move the bracket to disengage the gears.
  • With the Input Test menu on-screen, make adjustments by releasing the accelerator or brake pedal so that the variable value is below 30H.
  • Mesh the gears to secure the bracket. Be sure that the gear is fully engaged and tighten the bracket screws.
  • Loosen the two screws which secure the adjust gear.
  • With the Input Test menu on-screen, make adjustments by stepping on the accelerator or brake pedal so that the variable value is above COH.
  • When the desired value has been obtained, retighten the two adjust screws.
  • Close the rear access panel.
  • Set the Gas and Brake Pedal variable values in the Control Range (“Volume”) menu.

PorenTIOMETER REPLACEMENT Accelerator Side Brake Side

  • Turn off and unplug the Indy 500 Twin game.
  • Open the lower rear service panel on the affected side. From the rear, the Brake is on the right, the Accelerator is on the left (see Figure 58).
  • Loosen the two screws which secure the potentiometer (V.R.) bracket (see Figure 59).
  • Remove and replace the potentiometer, bracket and gear,
  • Replace the bracket screws.
  • Close the rear access panel.
  • Turn on the Indy 500 Twin game. FiGure 58: ACCELERATOR AND BRAKE ASSEMBLY ACCESS
  • In the Input Test menu verify the potentiometer values by stepping on the accelerator or brake pedal and verifying that the variable value is above COH, and releasing the accelerator or brake pedal and verifying that the variable value is below 30H.
  • Set the Gas and Brake Pedal variable values in the Control Range (“Volume”) menu.
Page 79

a SCREW (2) Machine screw 8-32 with lock washer VBL 220-5373

SCREW (2)

8X32, using flat & spring washers

Ficure 59: ACCELERATOR AND BRAKE ASSEMBLY GREASING

  • Turn off and unplug the Indy 500 Twin game.
  • Remove the four hex bolts that secure the Accelerator and Brake assembly to the floorboards.
  • Remove the two phillips screws that secure the Accelerator and Brake assembly to the back panel.
  • Carefully slide the Accelerator and Brake assembly toward the seat, using caution to avoid damaging the cable harness.
  • Disconnect the Accelerator and Brake assembly harness.
  • Move the Accelerator and Brake assembly to a work location. The unit weighs approximately 5 Ibs. 7, Remove the 4 tamperproof screws which secure the Pedal Cover and remove the Pedal Cover by sliding it forward.
  • Remove the Pedal Shaft from the lower portion of the accelerator and brake pedals. At this time, ensure that the accelerator and brake pedals are firmly secured as they are subjected to the torsion spring force.
  • Apply grease to the torsion spring, the pedal shaft, and the pedal bolt on both the accelerator and brake sides (see Figure 60). 10, Reassemble and install the Accelerator and Brake assembly.

GREASING Accel. side & Brake side \ Torsion Spring part

Accel. side & Brake side Gear part erase black) Pedal Shaft removed

Ficure 60: ACCELERATOR AND BRAKE GREASING ACCESS

  • M4x8
Page 80

STEERING WHEEL SERVICE

If the Steering Wheel values cannot be set within the appropriate ranges in the Input Test menu, an adjustment of the potentiometer is needed. If the potentiometer cannot be adjusted appropriately, it needs to be replaced. The gears should be greased every three months.

CAUTION! The Control Panel weighs approximately 10 Ibs. Use care in moving and handling. The Steering Wheel motor may be hot after use. Wait until it cools to service.

ACCESS

  • Turn off the Indy 500 Twin game.
  • Remove the six tamperproof screws that secure the Control Panel to the cabinet on the affected side (see Figure 61).
  • Carefully pull the Control Panel away from the cabinet, using caution to avoid damaging the wiring.
  • To replace, connect the wiring harness, lift into place, and secure the six screws.

Ficure 61: Controt PANEL ACCESS

ADJUSTING The gear near the RED cable is connected to the Motor Drive Board. The gear near the YELLOW cable is

connected to the Game and Drive Control Boards. Refer to Figure 62 for parts locations.

  • The Indy 500 Twin game must be left plugged in and turned on. Exercise caution in using tools around the plugged-in game.
  • Remove the Control Panel, but do not disconnect the wire harnesses.
  • Loosen the two hex bolts under the appropriate outer gear, move the bracket, and disengage the gear.
  • With the Input Test menu on-screen, make adjustments by turning the Steering Wheel.
  • Mesh the gears to secure the bracket. Be sure that the gear is fully engaged and tighten the bracket screws.
  • While the Steering Wheel is in the centered position, make fine adjustments by loosening the two screws on the top of the gear and turning the gear holder.
  • When the desired value has been obtained, retighten the two upper screws.
  • Reinstall the Control Panel.
  • Set the Steering Wheel variable values in the Control Range (“Volume”) menu.
Page 81

V.R._for Motor Drive BD (3P yellow Connector) 220-5373 or 220-5484 V.R. for Game BD & Drive Control (3P_red Connector) 220-5373 or 220-5484

Wx 12, o/flat and i he spring washers M4X12, w/flat and spring washers

Ficure 62: STEERING WHEEL ADJUSTMENT

POTENTIOMETER REPLACEMENT The gear near the RED cable is connected to the Motor Drive Board. The gear near the YELLOW cable is

connected to the Game and Drive Control Boards. Refer to Figure 62 for parts locations.

  • Turn off and unplug the Indy 500 Twin game.
  • Remove the Control Panel.
  • Disconnect the three 3-pin wiring harnesses (WHITE: Power, RED: Game Board and Drive Control Board, YELLOW: Motor Drive Board).
  • Loosen the two hex bolts under the appropriate outer gear, and remove the bracket and gear.
  • Replace the gear and bracket.
  • Mesh the gears to secure the bracket. Be sure that the gear is fully engaged and tighten the bracket screws.
  • Connect the three 3-pin wiring harnesses (WHITE: Power, RED: Game Board and Drive Control Board, YELLOW: Motor Drive Board).
  • Reinstall the Control Panel.
  • Set the Steering Wheel variable values in the Control Range (“Volume”) menu.
Page 82

GREASING

  • Turn off and unplug the Indy 500 Twin game.
  • Remove the Control Panel.
  • Apply lubricant to the area shown in Figure 63 once every three months. Use Shell Auto Grease (090-044 Net 300g).

4, Reassemble and install the Steering Wheel assembly.

  • Reinstall the Control Panel.

Fiure 63: STEERING WHEEL GREASING

Page 83

Sur LEVER GREASING AND SwitcH REPLACEMENT

Grease the shift lever every three months. If the shift lever values cannot be set appropriately in Test Menu, replace the shift lever’s switch.

REMOVAL 1, Remove the four tamperproof screws that secure the shift lever to the control panel (see Figure 64).

  • Disconnect the connector that connects the shift lever cable to the cabinet wiring harness.

GREASING

  • Apply lubricant to the area shown in Figure 65 once every three months.
  • Use NOK KLUBER L 60 or Grease Mate (Part No. 090-00609).

Switcn REPLACEMENT

  • Disconnect the wiring connector of the shift lever cable to the affected switch (see Figure 66).
  • Remove the two tapping screws that secure the switch to the shift lever.
  • Replace the malfunctioning switch with a similar switch (Part Number 95-4276-00).
  • Replace the tapping screws.
  • Replace the shift lever cable.

Figure 64: SHirr Lever ACCEss Snrrer REPLACEMENT

  • Connect the shift lever cable to the cabinet wiring harness.
  • Set the shift lever assembly into position, ensuring that the “DOWN” label is on the upper section of the shift lever.
  • Replace the four tamperproof screws.

Grease Here

Ficure 65: Suirt Lever GREASING

(oI

Ficure 66: Suirr Lever Swircu Location

Page 84

Burron Lamp REPLACEMENT

  • Turn off the game at the power switch and unplug the Indy 500 Twin game.
  • Remove the four tamperproof screws that secure the button cover plate to the Control Panel (see Figure 67).
  • The button cover plate is removed by rotating the three metal tabs that project out of each button at approximately 2 0’clock counterclockwise to 1 o’clock and lifting the cover plate off. 4, Replace the lamp with a 6.3V, 1W lamp.
  • Reinstall the button cover plate to the control panel.

Ficure 67: Burron Access

Page 85

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 86

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 87

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 88

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 89

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 90

INDY 500 TWIN MANUAL COMMENTS

SEGA has made every effort to ensure that this manual is accurate. If you find any errors or omissions, or have other comments on the Indy 500 Twin manual, please write them below, detach, and deliver this page by FAX or mail to:

SEGA ENTERPRISES INC. (USA) ATTN: Engineering Dept. 45133 Industrial Drive Fremont, CA 94538 USA FAX: (415) 802-1754

Comments:

Optional Identification Information:

Name: Company: Address: City, State, Zip: Phone: FAX:

Page 91

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 92

COPYRIGHT NOTICE

This SEGA product has a copyright notice as follows: © 1995 Sega Enterprises, Inc. (USA) All rights reserved.

This signifies that this work was disclosed in 1995 and is the property of SEGA ENTERPRISES, INC. (USA) Every effort has been made to ensure that this manual is accurate. Sega Enterprises, Inc. (USA) is not liable for any ee notice.