CATHODE RAY TOMES

Thunder Jaws TM-349 1st Printing

ThunderJaws (rev 3) (Atari Games, 1990) · Technical Manual · 56 pages · 47 sections · original scan

Page 1

AQ 1st printing

Page 2

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 3

GAMES

Thunderaws

Universal Kit Installation Instructions

Page 4

Copyright © 1990 by Atari Games Corporation. All rights reserved. No part of this publication may be reproduced by any mechanical, photographic or electronic process, or in the form of a phonographic recording, nor may it be stored in a retrieval system, transmitted, or otherwise copied for public or private use, without permission from the publisher. The game play, all graphic designs, this technical manual, its accompanying schematic diagrams, and the display manual are protected by the U.S. Copyright Act of 1976. This Act provides for substantial penalties for violating federal copyright laws. Courts can impound infringing articles while legal action is pending. If infringers are convicted, courts can order destruction of the infringing articles. In addition, the Act provides for payment of statutory damages of up to $50,000 per infringing transaction in certain cases. Infringers may also have to pay costs and attorneys’ fees and face an imprisonment of up to five years as well as fines of up to $250,000 in the case of individuals and up to $500,000 in the case of corporations. Atari Games Corporation will aggressively enforce its copyrights against infringers. We will use all legal means to immediately halt any manufacture, distribution, or operation of a copy of video games made by us. Anyone who purchases such copies risks forfeiting such a game.

Published by: Atari Games Corporation 675 Sycamore Drive Milpitas, California 95036-1110

Printed in the U.S.A 5/90

Produced by the Atari Games Technical Publications Department. Technical Writing and Design: Andrea Dencker Illustration: Mary Ohanessian Sumner ThunderJaws Universal Kit

Notice Regarding Non-Atari® Parts

WARNING Use of non-Atari parts or modifications of any Atari game circuitry may adversely affect the safety of your game, and may cause injury to you and your players.

‘You may void the game warranty (printed on the inside back cover of this manual) if you do any of the following: Substitute non-Atari parts in the game.

  • Modify or alter any circuits in the game by using kits or parts not supplied by Atari Games Corporation.
NOTE This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of Federal Communications Commission (FCC) Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area or modification to this equipment is likely to cause interference, in which case the user, at his own ex-~ pense, will be required to take whatever measures may be required to correct the interference. If you suspect interference from an Atari game at your location, check the following: © All ground wires in the game are properly connected as shown in the game wiring diagram.
  • The power cord is properly plugged into a grounded three-wire outlet. © On games provided with an Electromagnetic Interference (EMD ground cage, be sure that the game printed-circuit boards (PCBs) are properly installed on the EMI ground cage and that the end board is securely installed with all screws in place and tightened. If you are still unable to solve the interference problem, please contact Customer Service at Atari Games Corporation. See the inside front cover of this manual for service in your area,
Page 5

‘ThunderJaws Universal Kit

Contents

1 Installation How to Use This Manual .... Cabinet Equipment Requirements Tools Required... Inspecting the Kit Preparing the Cabinet for the Kit Installation Assembling the Control Panel. Connecting the JAMMA Harness. Installing the ThunderJaws Game PCB Installing the Bezel, Labels, Decals, and Attraction Assembly Setting the Coin and Game Options. Game Play... 2 Self-Test Entering and Exiting the Self-Test Select Test Menu 2-2

2-2 2-3

2-3 Coin Options. Sound Board Tes Switch Test..... 24 Complete RAM Test 2-5 Complete ROM Test 2-6 2-6 2-6 2-6 2-6 Dual Playfield Test.. Motion Object Test Alphanumerics Test Color Test... Color Purity Test 2-7 Convergence Tes! 27 3 Maintenance and Troubleshooting Video Display. we BB Joystick Assembly 3-3 ROMs and RAMS. 3-4 4 Parts Illustrations See the list of illustrations that follows.

5 Schematics See the list of illustrations that follows.

ThunderJaws Statistics Sheet

Warranty Figure 1-1 1-2

1-3 Figure 2-1 2-2

2-4

2-6

2-8

2-10 2-11 2-12 2-13 2-14

Figure 3-1 Figure 4-1 4-2

4-4

Figure 5-1

5-2

Table 1-1 1-2

Table 2-1 2-2 2-3 2-4

Table 3-1 3-2

3-3 3-4 Illustrations

Assembling the Control Panel... Thunderjaws Kit Parts Installed in a Cabinet Control Panel Template... Select Test Menu Screen. Statistics Screen.

Sound Test Screen. Switch Test Screen Complete RAM Test Screen Complete ROM Test Screen. Dual Playfield Test Screen. Motion Object Test Screen .. Alphanumerics Test Screen Color Test Screen Color Purity Test Screen. Convergence Test Screen Maintaining the Joystick Assembly ThunderJaws Kit Parts List..... Microswitch Joystick Assembly . ThunderJaws Game PCB Assembly .. JSA Audio II PCB Assembly ThunderJaws Game PCB Assembly Schematic Diagram JSA Audio II PCB Assembly Schematic Diagram

Tables

Equipment Requirements Kit Contents List...... JAMMA Pin and Wire Connections Summary of the Self-Test Screens Game Option Setting: Coin Option Settings. When to Run the RAM Test Bad RAM Location by Error Address. Bad ROM Location by Error Address. Troubleshooting Table.. Voltage Inputs and Test Points on the PCBs What ROM Problems Look Like............ 3-3 Atari Games Video Connector Pin Assignments.... Color Assignments for RAM Errors Encountered

iti

Page 6

‘ThunderJaws Universal Kit

Safety Summary

The following safety precautions apply to all game operators and service personnel. Specific warnings and cautions will be found in this manual whenever they apply.

WARNING Properly Ground the Game. Players may receive an electrical shock if this game is not properly grounded! To avoid electrical shock, do not plug in the game until it has been inspected and properly grounded. This game should only be plugged into a grounded threewire outlet. If you have only a two-wire outlet, we recommend you hire a licensed electrician to install a three-wire grounded outlet. If the control panel is not properly grounded, players may receive an electrical shock! After servicing any part on the control panel, check that the grounding wire is firmly secured to the inside of the control panel. After you have checked this, lock up the game. AC Power Connection. Before you plug in the game, be sure that the game’s power supply can accept the AC line voltage in your location. The line voltage requirements are listed in the first chapter of this manual. Disconnect Power During Repairs. To avoid electrical shock, disconnect the game from the AC power before removing or repairing any part of the game. If you remove or repair the video display, be very careful to avoid electrical shock. High voltages continue to exist even after power is disconnected in the display circuitry and the cathoderay tube (CRT). Do not touch the internal parts of the display with your hands or with metal objects! Always discharge the high voltage from the CRT before servicing it. Do this after you disconnect it from the power source. First, attach one end of a large, well-insulated, 18-gauge jumper wire to ground. Then momentarily touch the free end of the grounded jumper wire to the CRT anode by sliding the wire under the anode cap. Wait two minutes and do this again. Use Only Atari Parts. To maintain the safety of your Atari game, use only Atari parts when you repair it. Using non-Atari parts or modifying the game circuitry may be dangerous, and could injure you and your players.

iv Handle the CRT With Care. If you drop the CRT and it breaks, it may implode! Shattered glass from the implosion can fly six feet or more. Use the Proper Fuses. To avoid electrical shock, use replacement fuses which are specified in the parts list for this game. Replacement fuses must match those replaced in fuse type, voltage rating, and current rating. In addition, the fuse cover must be in place during game operation.

CAUTION Properly Attach All Connectors. Make sure that the connectors on each printed circuit board (PCB) are properly plugged in. The connectors are keyed to fit only one way. If they do not slip on easily, do not force them. If you reverse a connector, it may damage your game and void your warranty. Ensure the Proper AC Line Frequency. Video games manufactured for operation on 60 Hz line power (used in the United States) must not be operated in countries with 50 Hz line power (used in Europe). If a 60 Hz machine operates on 50 Hz line power, the fluorescent line ballast transformer will overheat and cause a potential fire hazard. Check the product identification label on your machine for the line frequency required. ABOUT NOTES, CAUTIONS, AND WARNINGS In Atari publications, notes, cautions and warnings have the following meaning:
NOTE — A highlighted piece of information.
CAUTION — Equipment and/or parts can be damaged or destroyed if instructions are not followed. You will void the warranty on Atari printed-circuit boards, parts thereon, and video displays if equipment or parts are damaged or destroyed due to failure of following instructions.
WARNING — Players and/or technicians can be killed or injured if instructions are not followed.
Page 7

CHAPTER 1

Installation

How to Use This Manual

This manual provides infor-

mation for installing, testing,

and troubleshooting the ThunderJaws™ Universal kit. The manual is divided

into the following chapters:

m Chapter 1 describes how to install the ThunderJaws kit in your cabinet and the

ThunderJaws game play. Also included is the template for drilling the holes into the control panel. m Chapter 2 describes the self-test and how

to use the self-test screens.

m Chapter 3 contains troubleshooting and mainte-

nance procedures. ™ Chapter 4 contains parts illustrations and the kit

parts list. m Chapter 5 contains the schematics

for the ThunderJaws game PCB and JSA

Audio II PCB.

Page 8

Installation.

WARNING To avoid electrical shock, unplug the cabinet while installing the kit. After installation, plug the game only into a grounded 3-wire outlet.

Cabinet Equipment Requirements Table 1-1 lists the equipment required in the cabinet into which you are installing the ThunderJaws kit.

Table 1-1 Equipment Requirements

. Specification ° «Color RGB monitor. Separate positive horizontal and ve “cal sync or negative composite sync ~ Horizontal mounting = ‘Horizontal frequency: 15.750-KHz_ Vertical frequency: 60 Hz‘ Video input: 1V to 3V peak-to-peak Equipment: Video Display

positive polarity :

Control PanelMetal only:
| Speaker8Q, 5 Worlow!
Coin Counter45 VDC or +12 VDCi

Mechanism “~~ wi ius |

Power Cord‘Three-conductor with groundi
Power Supply+5 VDC + 0.25V @ 3.0 ampsi

+12 VDC @ 1.0amp.*. - ~5 VDC @.1.0 amp (Optional)

CAUTION Do not unplug or plug in the ThunderJaws game printed-circuit board (PCB) edge connector while the power is on. You could seriously damage the PCB.

Tools Required = Two C-clamps m = Drill with a 1/4-inch drill bit, a 1 3/4-inch hole cutter (or a 1 3/4-inch chassis punch), and a 1 3/16inch hole cutter (or a 1 3/16-inch chassis punch) Phillips screwdriver Flat-blade screwdriver Socket wrench set and ratchet ‘ThunderJaws Universal Kit

1/4-20 hex wrench Wire cutters and strippers Straight edge Squeegee X-ACTO™ knife Fast-ons (if you are installing a new JAMMA harness)

Inspecting the Kit Check to see that you have all the parts listed in the kit parts list in Table 1-2. If any part is missing or damaged, contact your distributor with the ThunderJaws kit serial number, part number and description of the missing or damaged parts, and date received.

Table 1-2 Kit Contents List

Part No. 038158-01 039450-01. 047205-01

047806-01 047806-02. 047807-01

047809-01 141026-001

178237-001'""* 178237-005'-

178283-003 178283-004 72-6612S

Page 9

ThunderJaws Universai Kit

Preparing the Cabinet for the Kit Installation

  • Turn off power to the game.
  • Remove the following from the cabinet: m Old PCB(s). m Game harness, if it is not Japan Amusement Machinery Manufacturers Association GAMMA)compatible. ™ Control panel decals, labels, and controls. m Side decals, graphics, and adhesive. If the cabinet sides are damaged, repair them before putting on the new decals, m Video display shield, display bezel, attraction shield, and marquee.
  • Wipe down and vacuum the cabinet. Paint the cabinet, if required,

047209-01 Control Panel Cover

178237-008 Blue Button ‘Assembly (2 places) Installation

Assembling the Control Panel To assemble the control panel, you need a copy of the installation template (see Figure 1-3) and the following parts from the kit: Clear cover for the control panel Control panel decal Two blue buttons Two red buttons Four snap-action switches Two “START/FIRE” button indicator plates Two “JUMP” button indicator plates Two joystick assemblies Twelve #10-24 x 1-inch-long carriage bolts, flat washers, and locknuts

  • Measure your control panel to find out what size the decal and cover should be. Cut the control panel decal and cover to fit.

75-5112B | —#10-24 x 3/4" Carriage Bolt

A040933-03 8-position ;_doystick Assy

erogeend 178283-003 SUMP Indica- STARTFIRE 047805-01 poles v Control Panel Decal - a Indicator Plate

i+ 175014-1040 #10 Flat Washer 177010-240 478287-001 #10-24 Hex Locknut Red Button Assembly (2 places)

Figure 1-1 Assembling the Control Panel

1-3

Page 10

Installation

  • Clamp the control panel cover to the control panel.
  • Drill four comer holes through the control panel and the control panel cover. Use a 1/4-inch drill bit. 4, Install four carriage bolts and locknuts through the holes to hold the cover and the control panel together.
  • Cut the holes in the cover and panel using a 1 3/16-inch hole cutter for the button holes and a 1 3/4-inch hole cutter for the joystick knob holes. ‘ThunderJaws Universal Kit

Use a 1/4-inch drill bit to drill the mounting holes for the joysticks. . Disassemble the control panel and the control panel cover. . Install the control panel decal on the control panel. Use a sharp knife and cut out the holes for the controls in the decal. . Install the cover on the control panel with four carriage bolts, washers, and locknuts.

Table 1-3 JAMMA Pin and Wire Connections

If your « ‘coin’ ‘counter(s)

_ Use this wire if you wai

Connect to the +12V t terminal of 1e por

est switch on the PCB. (fy ne an excrna 5 the PCB, Connect the wire to ihe? -N-O- terminal onthe common terminal of the switch ue a BR he (GND,

Connect this wire to the N. O. terminals of the left FIRE/ mon‘terminals of the'switches to one of the BK/W wi Connect this wire to the N.O. a minal of the switch to ‘one of

Page 11

Thunderjaws Universal Kit Installation

Table 1-3 JAMMA Wire Connections, Continued

GY ~~ Not used Not used ct OF the power supply Gf it exists) and one to the common termi Connéct't two of these wires to the’ common terminals <

Connect t6'the -5V terminal

12V. RIN or the 5 iM RIN (GND,

“MIPPCB if you'use'a second ‘coin’ counter. Note: Do noi If your counter ‘requires 5V, ‘connect a:wire from’ Also clip R24-on the game PCB. oe tee Co aa Ee

Not used GREEN = COMPSYNC:.. Attach 'to the video ee i _ Not used Not uséd' cue ‘ “RT COIN Connect to the N.O. terminal of the tig! i sev the:switch to a BK/W wire. Not used) 22% VIB Y/BN RT. JOYST UF “Connect to the N.0. ‘terminal S tovone of the BK/W wires? R Sots DN’ Saine as pin V!

z ect two of these wires to ‘the ‘common terminals of thy

ee panel. ssp itr bin aia £93 BK/W. GND” Same as pit e.*

Page 12

Installation

  • Install the buttons with the “START/FIRE” or “JUMP” indicator plate under each button. Install the blue player control buttons on the left and the red player control buttons on the right. (See Figure 1-1.) Install the joysticks with the carriage bolts, washers, and locknuts.

Connecting the JAMMA

Harness

  • If your game does not already have a JAMMA harness, install the JAMMA harness in the cabinet.
  • Install the split beads on the JAMMA harness as close to the edge connector as possible. Hold the beads on the harness with the tie wraps included in the kit. ‘ThunderJaws Universal Kit

Connect the wires designated for the red, green and blue video guns along with the sync and ground wires, according to Table 1-3. Connecting Coin Door Wires

  • Connect the wires on the JAMMA harness to the coin switches and meter according to Table 1-3.
  • Connect one terminal of the door lamps to one of the BK/W wires. Connect the other terminal of the door lamps to the R wire supplying +5V.
NOTE Do not use -5V for the coin door lamps. The -5V is required for audio. If you do not have (or use) -5V, the maximum power to the speaker will be reduced.
CAUTION You must install the split beads included in the kit on the JAMMA harness to meet FCC requirements. ©
  • Using Table 1-3, JAMMA Pin and Wire Connections, for wiring information, connect the JAMMA harness to existing component harnesses. Use crimp splices or butt soldering.
WARNING Do not simply tie the wires together. If you do, you could cause intermittent problems, loose connections, oxidation, or a fire.

Connecting Power Wires

. Connect the wires on the JAMMA harness to the wires for the power supply, as shown in Table 1-3. The ThunderJaws kit requires +5V and +12V. If -5V is available, it should be used too. Tie off any other voltage wires on the power supply besides +5V, - SV, and +12V. There is more than one wire for each voltage in the JAMMA harness. Use more than one wire for each voltage (connecting them as described in Table 1-

  • so that the edge connector does not overload and burn.

Connecting Video Display Wires

NOTE The JAMMA harness provides only negative composite sync. If your video display requires separate positive sync, see Chapter 3 for alternative wiring.

1-6 Some games have separate power supply outputs for the coin door lamps. If you choose to use these outputs, make sure you connect both terminals of each lamp to the terminals on the power supply. Connecting the Control Wires Connect the joystick harnesses and the button harnesses to the JAMMA harness according to the information in Table 1-3.

Grounding the Cabinet Find the ground lead (green) of the 115V input power line. Connect this lead in daisy-chain fashion to a bare metal part of the coin door, the control panel, the video display, and the power supply. This is required for the safety of the players. This AC ground must be of #18 AWG wire or larger. Checking the JAMMA Connections Before plugging in the game PCB, turn on the power to the game, and check +5 Volts on pins 3, 4, C, and D of the JAMMA connector; +12 Volts on pins F and 6; and —5 Volts on pins E and 5. Check that the video display and the attraction lamp have power. Now turn off the power to the game.

Installing the ThunderJaws

Game PCB

  • After you have checked the power on the JAMMA connector, above, install the ThunderJaws game PCB in the cabinet. Use the nylon standoffs and four #6-32 screws in the kit.
  • Connect the JAMMA connector to the PCB.
  • Turn on the power to the game. Check that the game PCB functions. If a video picture is not present, see Chapter 3.
Page 13

ThunderJaws Universal Kit

  • Bundle the loose wires together with tie wraps, and secure all wiring harnesses away from the PCB.

Installing the Bezel, Labels, Decals, and Attraction Assembly

The kit parts are shown assembled in a cabinet in Figure 1-2.

Installing the Display Bezel Find the cardboard display bezel (part no. 047809-01). Measure the size of the existing display bezel and cut the new display bezel to size, if necessary. Installing the Product ID and FCC Label Place the product ID label (part no. 038158-01) and FCC label (part no. 039450-01) on the back of the cabinet.

Installing the Side Panel Decals Find the side panel decals. Wet the left and right side panels of the cabinet with slightly soapy water. Then position the decals as shown in Figure 1-2. Remove any wrinkles in the artwork using a squeegee. Allow the sides to dry. Installing the Attraction Assembly Find the ThunderJaws attraction shield and the attraction film. Using the existing shield as a template, cut the shield and film to size, if necessary. Install them on the cabinet as shown in Figure 1-2.

Setting the Coin and Game Options

Set the coin and game options in the self-test. See Chapter 2 for information about the option settings.

Game Play

This section of the manual describes the theme of the ThunderJaws game and the game play features. Introduction : The beautiful, brilliant, but quite insane Madam Q has devised a plot to destroy the surface of the Earth and leave her underwater city intact. She has created an army of genetically mutated humans and bionic warriors to protect her labs, bases Installation.

and city and to carry out her mad schemes. You are a member of a underwater special forces unit and have been selected to infiltrate Madam Q’s headquarters and stop her demented plans before she can destroy the world. The only known operation of Madam Q’s vast underwater empire is a research station located on Paradise Island in the South Pacific. You will be taken there to begin your mission. You are directed to take this sta~ tion, shut it down, and learn as much as possible about the whereabouts of other parts of Madam Q’s empire...good luck!

One or two players can enter the game at any time with ThunderJaws’ buy-in and game continuation features. In a one-player game, if a player “dies”, he can add coins to continue, and he will be restarted at the last checkpoint completed. To start or continue a twoplayer game, the second player will be flown in on a jet pack to join (or rejoin) player one. Controls consist of one eight-position joystick and two buttons per player (“Fire/attack” and “Jump”). In the swimming mode, Fire shoots the current weapon and Jump gives an extra flipper boost. In the surface waves the player is in a walking mode and the controls have a variety of movements. Fire shoots the current weapon or attacks the enemy handto-hand. Fire with the joystick in the up position will fire the weapon at a 45° angle upwards. On the surface levels, the Jump button allows the player to jump over objects to the left or right. With the joystick in the up position, Jump will make the player jump higher and reach upper walkways; with the joystick down, the player can jump to lower walkways. The joystick can also be used in front of levers to activate playfield animations and to climb up and down ladders. Players can retrieve air tanks (in the water) and firstaid kits (on the surface) for extra health. Flashing special weapons can provide extra fire power. The special weapons include the Uzi, Flamethrower, Super-Seeker, Explosive Bolt, and Triple Shot. As the game begins, players are dropped off underwater by a mini-sub outside a coral reef which borders Paradise Island, Players must fight Madame Q's divers and cybernetic sharks that guard the entrance to her lab. Upon gaining entrance to the underwater city, players shed their scuba gear and find themselves

1-7

Page 14

Installation

047205-01 Attraction Shield

047807-01 [Attraction Film

047809-01 ° Bezel with Graphics “

, ) ThunderJaws Universal Kit

72-6612S #6 x 3/4" PH Screw

047806-01 Side Panel Decal

Self-Test Volume Switch — Control

A047872-01

047209-01 75-5112B Control Panel Cover "10-24 x 3/4"

Carriage Bolt

178237-008 Blue Button Assy (2 places)

. 178283-004 —178283-003 Control Panel Jump Indicator ——StarvFire Plate Indicator Ptate

175014-1040 #10 Flat Washer 178237-001 177010-240 Red Button Assy #10-24 Hex (2 places) Locknut

Figure 1-2 ThunderJaws Kit Parts Installed in a Cabinet

1-8 ‘Thunderjaws PCB Board Set 178265-001 L-Shaped Nylon Standofts 72-6128 #6 x 3/4" PH Screw

Page 15

ThunderJaws Universal Kit Installation

‘Top edge of control panel (closest to monitor). Right half of control panei

O O

i Red button Jump")

Red button ("StervFire”) OOeeeeeeeeeeen +

Joystick O L]

Top edge of control panel (closest to monitor). Left half of controt panei

Blue button

  • (“Jump”)

Blue button ('StarvFire")

Joystick O C]

Figure 1-3 Control Panel Template

Page 16

Installation

in Madame Q's lab. The transformation tank where Madame Q creates her soldiers can be seen in the background as players fight Bionic Guards, Bionic Wolves, and other creatures. In the lab, players must find and rescue the beautiful human captives before they are converted into more mutant soldiers. The captives saved, players then swim underwater through the treacherous toxic waste dump to search for Madame Q. Their quest takes them to the infrastructure of the oil drilling platform, down into the bowels of the geothermal power plant, through the underground volcano, to a control room, into the underwater volcanic cavern, on through the monitor room, and into the thermonuclear plant. Finally, the players come face-to-face with the evil Madame Q in the control room of her hidden headquarters. ThunderJaws Universal Kit

Players must battle the heinous creations of Madame Q throughout her empire. In addition to a plethora of lesser biomechanical creatures, players

  • must fight with the Cyber Sharks, Manta Guys, Bionic Guards, Bionic Wolves, Lava Lords, Flame Dancers, Bat Babes, Spider ‘Bots, Rail Bots, Tread ’Bots, Punkers, and Madame Q’s own personal guards. The ultimate battle takes place where Madame Q transforms herself into her true identity: a grotesque mutant creature é of awesome ~~ power!

{I

Page 17

CHAPTER 2

Self-Test

Use the ThunderJaws self-test

to check the condition of

the game circuitry and con-

trols. You will see the self-

test information on the

video display and hear the sound test infor-

mation through the speakers. You do not

need any additional equipment to perform

the self-test. Perform the self-test when you first set up the game, each time you

collect the money, or when you

_ Suspect game failure. This

. chapter shows the screens

in the self-test and explains each

of the tests. The screens and explanations

are arranged in the order they appear in the

self-test. Table 2-1 lists all the self-test

screens and their purposes.

Page 18

Self-Test

Table 2-1 Summary of the Self-Test Screens

Select Test Menu

Switch ‘Test

Video RAM (looping). olor RAM (looping) ‘Common RAM—Video ONLY *» Common RAM—Secondary ONLY looping). Common RAM—BOTH processors (looping) AIL RAM (re-start) - Exit RAM tests ‘Compléte ROM Test Dual Playfield Test Motion ‘Object Test - Alphanumeric Test

Green Color Purity Blue Color Purity ‘White: Color Purity Grey: Color Purity = “Convergence Test. White Convergence ‘Violet Convergence

Green n Convergence

Entering and Exiting

the Self-Test

To enter the self-test, turn on the self-test switch on the game PCB. Exit the self-test by switching off the self-test switch at any time.

Choose which test or screen you want to see from this menu, shown in Figure 2-1. Move up and down the menu using the left joystick. Choose the screen by pressing the left fire button.

Statistics

Use the information shown on the statistics screen (see Figure 2-2) to keep track of your game use and maximize your profits. Record the information on the ThunderJaws statistics page in the back of this manual. The statistics are collected from the last time the statistics were cleared. You can clear the statistics by pressing the left Jump button. ThunderJaws Universal Kit

Figure 2-1 Select Test Menu Screen Left Coins shows the number of coins counted in the left coin mechanism. Right Coins shows the number of coins counted in the right coin mechanism. New Games shows the number of unique games played. A unique game is counted from the moment the first player started to the time the last player quit, regardless of how many times the game was continued. Cont Games shows the number of games that players continued. Total Games shows the sum of new and continued games. 0 Plyr Min is the number of minutes the game was idle. 1 Plyr Min is the number of minutes the game was played by one player.

q ogran

Figure 2-2 Statistics Screen

Page 19

ThunderJaws Universal Kit

m= 2 Plyr Min is the number of minutes the game was played by two players. mL Plyr Min is the number of minutes the game was played by the left player. mR Plyr Min is the number of minutes the game was played by the right piayer. = Error Count shows the number of errors counted in the erasable memory. if you have an error count, the statistics may be wrong. If you consistently have errors counted for several weeks, replace the EEROM at 12C. m Total Coins is the number of coins put into both coin mechanisms. m Average Time Per Coin shows the result of dividing the total time (1 and 2 player minutes) by the total number of coins (left and right coins),

Game Options

Check and select the game options on this screen, shown in Figure 2-3. To move through the options, push the left joystick up or down. Change the option highlighted in red. The factory default settings are shown in lime green. To change a setting, move the left joystick right or left. To save the new settings, press the left fire button. This returns you to the menu screen. If you want to keep the original setting, although you have changed it, press the right fire button. This brings back the original setting. Use the left fire button to return to the menu screen. Self-Test

Figure 2-3 Game Options Screen

NOTE The word More appears at the bottom of the screen to indicate more options. Push the left joystick down to see the rest of the options.

The game options, with defaults, are shown and explained in Table 2-2.

Coin Options

Check and select the coin options on this screen, shown in Figure 2-4. To move through the options, push the left joystick up or down. Change the option highlighted in red. The factory default settings are shown in lime green. To Table 2-2 Game Option Settings

genni Easy! 38 Moderate + Hard" «Hardest 2°34, 4° 5 10,000 points’ “25,000 points 50,000 points No extra lives +

ag'no io use your own chosen ‘Settin; "2 credits to start, 1 credit to continu No special cost'to start

Lets you set all the game options to the factory options or lets you use your own settings. Make sure you t this to

2-3

Page 20

Self-Test ‘ThunderJaws Universal Kit

Figure 2-4 Coin Options Screen

change a setting, move the left joystick right or left. To save the new settings, press the left fire button. This returns you to the menu screen. If you want to keep the original setting, although you have changed it, press the right fire button. This brings back the original setting. Use the left fire button to return to the menu screen. The coin option settings, with defaults, are shown and explained in Table 2-3.

Sound Board Test

The sound test indicates the condition of the sound effects circuit on the game PCB. The sound test screen appears in Figure 2-5. Use the left joystick to select the sound and press the left jump button to listen to it. (You could have numer- Table 2-3 Coin Option Settings Figure 2-5 Sound Test Screen ous sounds playing simultaneously, depending on which ones you select.) You can also see the state of the two coin mechanism switches in this test: “0” indicates off, and “1” indicates on or closed. Pressing the right jump button stops all sounds, and pressing the left fire button returns you to the menu screen.

Switch Test

The switch test screen is shown in Figure 2-6. Test the buttons and joysticks. As you use each control, highlighting appears around its name on the screen. If the highlighting does not appear, check the connections, switches, and coin mechanism.

2 coins give 1 extra coin

  • 4 coins give 1 extra coin. “4 coins give 2 extra coins’ 5 coins give 1 extra eéin 3.coins give 1 extra coin. “Free Play (for demonstration mode) + Manufacturer

2-4

Page 21

‘ThunderJaws Universal Kit Self-Test

Table 2-4 When to Run the RAM Tests

OHSao:usLocation of|

Problem oe RAMs Tested |

PsPlayfield is erratic oroe|
eft:Joystic!ghtJoystick Rlooks wrong.;6/7H, BH
eftJoystick Baystick DMotion Objects are erratic Video RAM/
©°&#or not working propérly.eoi

Colors look wrong.

Figure 2-6 Switch Test Screen

Press the left fire and jump buttons simultaneously to return to the menu screen.

Complete RAM Test

Use this selection screen, shown in Figure 2-7, to choose which RAM test you want to perform. Use the different tests according to Table 2-4. If you get an error in any of the RAM tests, see Table 2-5 for more information, If you have serious RAM problems, you may see only a colored screen. If this happens, see Table 3-5. To choose a test, move the box to the test name and press the left fire button. For all of the looping RAM tests, holding down the Fire button will cause the test to end when the current loop is completed. For some of these tests, this could take as long as several minutes. When the test ends, the screen will display the number of errors detected. Pressing the Fire button again will return you to the RAM test selection screen. toiay Error, Address

© 3F0000 3E0000

Return to the menu screen by moving the box to the words Exit RAM Tests, then press the left fire button to return to the menu screen. Selecting the Common RAM—Secondary Only or the Common RAM—Both test will also perform a communications test with the secondary processor before actually testing the RAM. If the message ERROR: NO COMMUNICATION WITH P2 is displayed, there is a problem with either the common RAM on the secondary processor circuitry itself. If you have already successfully run the Common RAM—Video ONLY test, then the problem lies with the secondary processor. If the Video ONLY test also fails, the problem is probably with the common RAM itself.

Complete ROM Test

The ROM test screen is shown in Figure 2-8. The ROM checksums appear. If the game has no ROM errors,

ci

Figure 2-7 Complete RAM Test Screen Figure 2-8 Complete ROM Test Screen

2-5

Page 22

Self-Test

you are asked to return to the menu screen by pressing the left fire button. The location and checksum of each ROM are displayed on the screen. The data in parentheses indicates which processor the ROM is connected to (v = video, s = secondary, and c = common), its address range in 10000 hex (0, 2, 4, 6, and 8 indicate 00000 through 80000), and whether this is the high or low (H. or L) data byte. If the game does have ROM errors, the ROM test screen will remain until the ROM error information is complete, as shown in Figure 2-8. The ROM error test takes a few seconds. The locations of the bad ROMs are indicated on the screen. Press the left fire button to return to the menu screen, As part of the ROM test, the game also performs a communications test with the secondary processor. If the message ERROR: NO COMMUNICATIONS WITH P2 is displayed, the checksums for the secondary processor ROMs will not be reported. You should run the RAM tests Common RAM—Video ONLY, —Secondary ONLY, and BOTH to determine the cause of the failure. If you think you have a ROM error, but the screens show no messages, see Table 3-3 for information about the locations of various ROM functions.

Dual Playfield Test

The dual playfield test screen, shown in Figure 2-9, tests the transparency, movement, and color of various objects on both playfields. Pressing either of the two right two buttons allows you to switch to a new rear and front playfield picture. Pressing the left jump button brings the rear playfield to the front, or sends the front playfield to the rear. Use the left joystick to move the front playfield, and

Figure 2-9 Dual Playfield Test Screen ThunderJaws Universal Kit

the right joystick to move the rear playfield. Press the left fire button to return to the menu screen.

Motion Object Test

The motion object test screen, shown in Figure 2-10, tests the movement and color of various game objects.

Choose an object with the right joystick. Use the left joystick to move the object. Press the left fire button to go to the menu screen.

Alphanumerics Test

The alphanumerics test, shown in Figure 2-11, checks the condition of the alphanumerics in the game. In the ROM at 4M are eight separate banks of alphanumeric stamps. Pressing the left jump button cycles through all eight of these banks. If you see an error on the screen, check the EPROM at 4M. Press the left fire button to go to the menu screen.

Figure 2-11 Alphanumerics Test Screen.

Page 23

‘ThunderJaws Universal Kit

Color Test

This test indicates the dynamic range of the video display color circuit. The screen is shown in Figure 2-12. The screen should show four bands (white, red, green, and blue from top to bottom), ranging from dark to

Figure 2-12 Color Test Screen bright, left to right. In addition, you can use the left joystick to move a thin horizontal band that “stains” or inverts the video level of whatever area it is positioned over. If the screen does not match this description, adjust the video display as described in the video display manual. Pressing the right jump button toggles the screen between 32 and 64 color levels. Pressing the left jump button alternately removes and shows the border, horizontal band, and text. Return to the menu screen by pressing the left fire button.

Color Purity Test

The color purity test has five screens. Each screen is a rectangle of color. The first screen, shown in Figure 2-13, is red. The other screens, which you can see by pressing the left jump button, are green, blue, white, and gray. These screens show the adjustment of the color purity of the video display. Each screen should display a rectangle of color, with no curving at the corners, no unevenness of color, and no lines in the display. If the screens are not correct, adjust the video display as described in the video display manual. Return to the menu screen by pressing the left fire button, Self-Test

Figure 2-13 Color Purity Test Screen

Convergence Test

The convergence test has three screens: first white, then violet, and finally green. The white screen is shown in Figure 2-14. To see the violet and green

ae a ba ECE

EEBEEEEE PEE EE EEE EEE EEE PEEP

teh} oes PEEP EEE EEE EC EEe terre ees eoaaaceeazaeeaaeaeeereat behalabead “Thy NAA SHSSHo a0 EAC e0 BROSD BOUDoSE

screens, press the left jump button. If necessary, move the grid pattern by moving the left joystick. Press the left fire button to go to the menu screen. Check the following on the screens: m The grid lines should be straight within 3.0 mm and the lines should not pincushion or barrel. m The convergence of the lines on the violet and white screens should be within 2.0 mm. If these screens do not meet these criteria, adjust the video display as described in the video display manual.

2-7

Page 24

Self-Test

N

2-8 ‘ThunderJaws Universal Kit

S

Page 25

CHAPTER 3

~ Troubleshooting

and Maintenance

This chapter contains troubleshooting tables and repair procedures for your ThunderJaws game. The chap- ‘M -

ter has two parts. The first part contains three

troubleshooting tables. The first table has gen-

eral troubleshooting information, the second table contains the voltage levels and test points on the game printed-circuit board (PCB), and the last table de-

scribes ROM-caused problems with specific ROMs to check and replace. The last part of

the chapter has information about connecting

the video display if it requires separate posi-

tive sync, repair information for the joystick assembly, and locations of the RAMs and

ROMs on the game PCB.

Page 26

Troubleshooting and Maintenance ‘ThunderJaws Universal Kit

Table 3-1 Troubleshooting Table

game turned on?. ‘Are the connections

Convergence, ay

3-2

Page 27

‘ThunderJaws Universal Kit ‘Troubleshooting and Maintenance

Table 3-2 Voltage Inputs and Test Points on the PCBs

4540.25 VDC © V¢cl CR1 LED “= Lights when 5 V is applied to the PCB and the resét asp jumper is open. : JSA Audio II PCB: 2 CRS LED oe Lights when the +12 V supply is good. CR4 LED Lights ‘when the -5.V supply is good. CR3 LED Lights when the +5 V'supply is good. +VOP “412 V from the switching power supply. (pin 4 of IMB2) “© circuitry. -VoP -5V from the switching power supply Gf connie Negative supply for the :

(pin 11 of LB)analog circuitry.2j

Table 3-3 What ROM Problems Look Like e 5 ‘ ROM Causing ae

Problem:"the Problem_ Check the ROM at:

Program Works but the motion ‘Objects or playfield are wrong.” Graphics i IP 17, 1R-17R, iS-i7S “Garbage 6n screen; program doesn't work.” . Program ROMs ea cave, 14E- 17E, 161, 17L, 1N,

No sound.:Audio ROM.

Erratic of wrong ADPCM sounds ADPCM ROMs.

Video Display Table 3-4 Atari Games Video

Se Connector Pin Assignments Sync Problems RISER ; : |

Some video displays cannot use the composite nega-Pins:

tive sync that is on the JAMMA connector. The Thun- 1 derJaws kit includes a standard Atari Games video 2 connector (located at 4A) that provides separate posi- 3 tive sync. Refer to Table 3-4 and make the appropriate 4 connections for your video display. 5 For other problems, see the video display manual that 6 :

came with your game.“d
ae8i

aa) _

Joystick Assembly°0|
The joystick is shown in Figure 3-1. If you want to re-11!

pair the joystick, disassemble it by removing the E-ring at the bottom of the shaft and removing the screws. Table 3-5 Color Assignments for

ROMs and RAMs RAM Errors Encountered

If you have think you have bad ROMs or RAMs, pre-eo=i
form the ROM or RAM test in the self-test. If you seeco Redes2a|
only a colored screen and cannot enter the self-test,Blacklor or Commoni
see Table 3-5. If you have a ROM problem, see TableAnything else ©VAD ehip Se associated: video

3-3. For the location of all the ROMs and RAMs on the : : game PCB, see Figure 4-3.

3-3

Page 28

Troubleshooting and Maintenance ThunderJaws Universal Kit

Ball-Shaped Handle and Shaft

4 Lithium Grease

Plunger Spring

|__ Upper Housing ‘Assembly

Upper Housing

Cushion Ring

Pivot Balt

#8-16 X-Rec ~ Screw ~ < ©&D 1066" cia Rot Pin

8 Position Plate

Actuator Half-Ball

Figure 3-1 Maintaining the Joystick Assembly

3-4

Page 29

CHAPTER 4

~ Parts Illustrations

This chapter provides

information you need

to order parts for

‘ your game. When

you order parts, give

the part number, part name, the number of

this manual, and the serial number of your

game. With this information, we can fill your of this manual. order rapidly and

correctly. We hope

this will create less

downtime and more

profit from your

games. Atari Games Customer Service phone

numbers are listed on the inside front cover

Page 30

Parts Illustrations ThunderJaws Universal Kit

Figure 4-1 ThunderJaws Kit Parts List A047800-01 A

Part No.DescriptionPart No.Description
047205-01Attraction Shield178283-004Plastic Jump Indicator Plate
047209-01Control Panel Cover72-6612S#6 x 3/4-Inch-Long. Type PH, Cross-Recessed
047805-01Kit Control Panel Decal‘Type-AB Screw
047806-01Side Panel Decal75-5112B#10-24 x 3/4-Inch-Long Black Carriage Bolt

A040933-03 _8-Way Joystick Assembly 047806-02 Poster

047807-01Auraction Pane] FilmA046501-01JAMMA Harness Assembly
047809-0119-Inch Bezel With GraphicsA047872-01ThunderJaws PCB Board Set Assembly.
141026-001.50-Inch LD. Split Ferrite BeadConsists of the following items:

A047364-01 ThunderJaws Game PCB Assembly (see

160044-001Snap-Action SwitchFigure 4-3)
175014-1040#10 Flat WasherA047184-04JSA Audio II PCB Assembly (see
177010-240— #10-24 Hex. Polymer LocknutFigure 4-4)
178032-002#10-24 Wire & Cable Tie177000-5366-32 Nylon Nut

178278-616 #6 Threaded PCB Support Standoff

178237-001Red Button AssemblyTM-349ThunderJaws Universal Kit Installation

178237-005 _—_ Blue Button Assembly Instructions 178265-001 Nylon L-Style Standoff 178283-003 _ Plastic Start/Fire Indicator Plate

Page 31

‘ThunderJaws Universal Kit

pe 107027-001 Lithium Grease

041287-01 Lower Housing

160044-001 Snap-Action Switch

Cushion Ring

039717-03 8-Position Plate (040304-01 Ball-Shaped Handle ‘and Shaft

NX

Upper Housing

176030-110 +#4-20 Screw |

03971401

039716-01 | Pivot Ball

73-20824 125" Dia Roll Pin

176018-003 #8-16 X-Rec “ Screw > 73-20509 ‘ .086" Dia Roll Pin

T 040693-01 ‘Actuator Halt-Ball

Figure 4-2 Microswitch Joystick Assembly A040933-03 B Parts Illustrations

(A047010-02 Upper Housing [— “Assembly

Page 32

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 33

Parts Illustratrations ThunderJaws Universal Kit

TDAZ030 ba 137579-001 SS “001 802_=_J0 §0>_= Tass Ls3943 Ls74 Ce) 0? ys 5) as 5 g L393 Ls13z +) 500 a

7 Ls138 a 137526-001 = Ls240 136056-2101 (Ij —=— 0s

Figure 4-4 JSA Audio II PCB Assembly A047184-04 A

Page 34

Parts Illustrations Thunderjaws Universal Kit

N O T E S

Page 35

CHAPTER 5

Schematic Diagrams

board (PCB) and the JSA

Audio II

diagrams for your ThunderJaws™ PCB. (The PCB assembly drawings are This chapter contains the schematic

universal kit. The schematics are of illustrated in Chapter 4, Parts Illustrathe ThunderJaws game printed-circuit tions.)

Page 36

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 37

ThunderJaws Universal Kit Schematic Diagrams

wk Cire copra 4h-——O

C38 copra ——o & s-TesT coPT4 tt ‘O = ok

+5V

1 iiJ BHH _ R73 +5V

ik

ysint. Louw at 5 Out _saun-21 0 ite pz eusy /SCBSY

ofiADATA

2 ai Tess AUD-27

enmareF remen“"7 LO0Pr

/SNORES ——7 Sderur &

iscoonaeFIN saun-23
/SCOMRDPo .a=

POWER-ON- aa [18 Ye

RS ; ;

=470wrSCLK_squp-25

= TooPF

S I / 0 UPDATED 2-20-90

Figure 5-1 ThunderJaws Game PCB Assembly Schematic Diagram 047363-01 A

Page 38

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 39

‘ThunderJaws Universal Kit

R77 TP1S8 i ww Schematic Diagrams

/SCOMRD

/SWITCH

/SCOMHR /SNORES /LATCH

NOT STUFFED

135 —a] 13lp olt2_ Lake

So ALBKL aio 9 al —pLaKo ttl Sto ork A) Doge /ERESET Tr

/LATCH /8YSRES ——

Figure 5-1 ThunderJaws Game PCB Assembly Schematic Diagram 047363-01 A

5-5

Page 40

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 41

ThunderJaws Universal Kit Schematic Diagrams

a e SE e 6E| ry

2710240 2710240 2710240

"2 Sc 1o¢| e

2222
ag22
gFAgz
88g8
z7=z
555ES

+S

Zocure | cocve | eceuee | rocue| $a76

qed:dass[eedegy:

7ROMO — “ROMS 7ROMZ — /ROM3

7VRAM 7WOOC UNLOCK 7EEPROM

Figure 5-1 ThunderJaws Game PCB Assembly Schematic Diagram 047363-01 A

5-7

Page 42

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 43

ThunderJaws Universal Kit Schematic Diagrams

ASH.

Zlase rey aro 2 2 2\, 8 a a AB lar Aes ASM Ae] a3 ae oa ie oof AO +50 We CS! 4 272d2z

/COMREM curve —t#!

Eraarveeou—tps0

a2i— 4} ZB —/comrem eptack —— SR crm er Eel jecom zas3—* 12 yeRome

=Bya 5le [venom

cats that ERt7 2) ut AS eROMO Cart tsla3 a

Bi? thar oyres)8G J

TERT ik

aoa §|=
a=|Ra
or7| hh) Go
osf47Desay

8s) TLO0PF oa 23] 02] Of oo) fo WE CS1 OE lerecze /COMRAM CHR

LOL 4 2 cos . Us32 $$ ct —-——— srr

Figure 5-1 ThunderJaws Game PCB Assembly Schematic Diagram 047563-01 A

Page 44

Schematic Diagrams ThunderJaws Universal Kit

+sv sv

ri Sra bre ae 470 S470 S470 {5 SYNC _OUT reste saz HSYNC.OUT syrp-11

JAM-P

+3 “ yro-4

RTL 1x (SYNC ve USYNC OUT > yrg-10 3 I. lL. dor FOR: "Gor

«NOT STUFFED

oe *« = NOT STUFFED

Ro4 , 68 @ ed es Fa

x1 14.3184

Page 45

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 46

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 47

‘ThunderJaws Universal Kit

+t

Cet ceo + res Schematic Diagrams

>Ji-15, 470/25 4707250

ROT

Coz vee I rcpt

‘VaAcNo

PR ND» 4-22

Ji-16

RY 10K

71RQ

2N3904

a] SELF-TEST 1s

Is /NMI SFULL, a an

8)

/ROI0 Ls240

¥ i> > > > DD a5

a T L Ins

bs so?

$06

sos

sot

$03

soz

SOL

soo

Figure 5-2 JSA Audio If PCB Assembly Schematic Diagram 046487-01 A

Page 48

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 49

‘ThunderJaws Universal Kit

vee

sat"ae7ROM

3 2m se sALL $ ¢ 18 _/raw

SAS3) F|s6A138
Baia~2A128
BAZ3ae sur
rd4387SRO

sr//¥——4, oo EG

ONO

3F. PR Mix /REST cen oH —— /WRIO n SRLO 628 co TS JHRP Sry fe — HRV Siv32— /TROACK /ROIO /ROP

7WRIO

PRESET Schematic Diagrams

Fy

a —to at _ccrtre —4o ak cere Ayo Sa VFREG —tto 4 928 — ores tin alte 18.0 8

Figure 5-2 JSA Audio It PCB Assembly Schematic Diagram 046487-01 A

Page 50

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 51

ThunderJaws Universal Kit Schematic Diagrams

c24 YAMRUD 4

: ol

3.4

sheen

2. Tae - YAMAUC i Yi —— |

woEce “yu mo —!

a8 SA [1 4Oee8", /YRHRES alia leno eur SE yee loATa HP; Si sme ecltt Ssemi re 5 5 ecw cuz Ss POND, Ht

ACN Sono

Figure 5-2 JSA Audio Il PCB Assembly Schematic Diagram 046487-01 A

Page 52

‘Schematic Diagrams ThunderJaws Universal Kit

N O T E S

Page 53

tjaws Statistics Sheet

Statistics Screen

Plyr 0 Coins: Plyr 1 Coins: New Games: Continued Games: Total Games: 0 Plyr Mins: 1 Plyr Mins: 2 Plyr Mins: L Plyr Mins: R Plyr Mins: Error Count:

Total Coins: Average Time/Coin:

A.

ATARI

GAMES

Page 54

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 55

fed ped eM e lel eN eM el ee ped pepe el ed eed elle eel pel fel pel ed pel el elelelel (ca

Warranty

Seller warrants that its printed-circuit boards and parts thereon are free from defects in material and workmanship under normal use and service for a period of ninety (90) days from date of shipment. Seller warrants that its video displays and laser-video disc players (in games supplied with displays and video-disc players) are free from defects in material and workmanship under normal use and service for a period of thirty (30) days from date of shipment. None of the Seller’s other products or parts thereof are warranted. If the products described in this manual fail to conform to this warranty, Seller's sole liability shall be, at its option, to repair, replace, or credit Buyer’s account for such products which are returned to Seller during said warranty period, provided:

  • Seller is promptly notified in writing upon discovery by Buyer that said products are defective;
  • Such products are returned prepaid to Seller’s plant; and
  • Seller's examination of said products discloses to Seller’s satisfaction that such alleged defects existed and were not caused by accident, misuse, neglect, alteration, improper repair, installation, or improper testing. In no event shall Seller be liable for loss of profits, loss of use, incidental or consequential damages.

Except for any express warranty set forth in a written contract between Seller and Buyer which contract supersedes the terms herein, this warranty is expressed in lieu of all other warranties expressed or implied, including the implied warranties of merchantability and fitness for a particular purpose, and of all other obligations or liabilities on the Seller’s part, and it neither assumes nor authorizes any other person to assume for the Seller any other liabilities in connection with the sale of products by Seller.

REE e ere eee eee ere eee el elelelelelel ele

The use of any non-Atari parts may void your warranty, according to the terms of the warranty. The use of any non-Atari parts may also adversely affect the safety of your game and cause injury to you and others. Be very cautious in using non-Atari-supplied components with our games, in order to ensure your safety. Atari distributors are independent, being privately owned and operated. In their judgment they may sell parts or accessories other than Atari parts or accessories. Atari Games Corporation cannot be responsible for the quality, suitability or safety of any non-Atari part or any modification including labor which is performed by such distributor.

Page 56

, | Atari Games Corporation aah y A \X 675 Sycamore Drive ee a ATAI| P.O. Box 361110 A af AE" =

GAMES Milpitas, CA 95036