Pole Position II TM-255 1st Printing
Pole Position II (Japan) (Namco, 1983) · Technical Manual · 40 pages · 20 sections · original scan
*Pole Position and Pole Position Il are engineered and designed by
Namco, Ltd., manufactured under license by Atari, Inc. Trademark
by a qualified technician. The enhancement of any Pole Position tl game should only be performed
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
Pole Position Il
Enhancement Instructions
TM-255
ii Pole Position II
1983 by Atari, Inc All rights reserved.
No part of this publication may be reproduced by any mechanical, photographic, or electronic process, or in the form of a phonographic recording, nor may it be stored in a retrieval system, transmitted, or otherwise copied for public or private use, without permisssion from the publisher.
The game play, all graphic designs, this technical manual, its
ing schematic diagrams, and the display manual are protected by the a S. Copyright Act of 1976.
This Act provides for increased penalties for violating federal copyright laws. Courts can impound infringing articles while legal action is pending. If infringers are convicted, courts can order destruction of the infringing articles.
In addition, the Act provides for payment of statuatory damages of up to $250,000 in certain cases. Infringers may also have to pay costs and attorneys' fees and face an imprisonment of up to five years.
Atari will aggressively enforce its copyrights against any infringers. We will use all legal means to immediately halt any manufacture, distribution, _ or Operation of a copy Of video games made by us. Anyone who purchases such copies risks forfeiting such a game.
Published by: ATARI, INC. 790 Sycamore Drive P.O. Box 906 Milpitas, California 95035
Printed in the U.S.A. 10M
'TM-255 Pole Position II
TABLE OF CONTENTS
Tools Required for Enhancement.......... Enhancement Procedure for the Upright Game Replace the Attraction Glass.......... Replace the Display Shield.. Remove the Printed-Circuit Boards Modify the Printed-Circuit Boards.. Set the Option Switches............- Install the Printed-Circuit Boards.... Install the Decals.............. Install the Self-Test Chart. Perform a Self-Test......cseeeesscccceneeccens Change the Pole Position Schematic Package....
Modify the Printed-Circuit Boards Set the Option Switches............ Install the Printed-Circuit Boards.. Install the Decals......... Install the Self-Test Chart...... Perform a Self-Test......eseceecceccceceeceees Change the Pole Position Schematic Package......... Saeed ee ewes
Figure Figure Figure Figure Figure Figure Figure Figure Figure Figure LIST OF ILLUSTRATIONS
Parts Affected by Enhancement Procedure..... see ceeee Attraction Glass and Display Shield Replacement-- Upright. Atari PCB Components Affected by Enhancement...........--- NAMCO PCB Components Affcted by Enhancement. Removing ICs (Cut Pin Method).. Removing IC Pins................. Removing Solder from Plated—Through Holes. Removing Solder from Lead Connection Pads. see Removing an IC from a Socket.. 10 Display Shield Replacement—Sit-Down.........eeceeeeeecees WOOIKDUAWNEe OMDIIYINwWH
iii
T™M-255 Pole Position II
LIST OF TABLES
Table 1 Enhancement Kit Contents—Upright......sesseeeececsceeeees 3 Table 2 Enhancement Kit Contents—- Sit-Down 4 Table 3 Tools Required for Enhancement. . 5 Table 4 Atari CPU PCB Component Locations... wee 17 Table 5 IC Socket Locations on the Atari Video PCB.... 18 Table 6 Atari Video PCB Component Locations..... we. 18 Table 7 Namco CPU PCB Component Locations..... . 19 Table 8 IC Socket Locations on the Namco Video PCB. +.» 20 Table 9 Namco Video PCB Component LocationS........... 21 Table 10 Factory-Recommended Settings for Play Options....... 22 Table 11 Factory-Recommended Settings for Price and Play Options... 22
iv
T™-255 Pole Position II
INTRODUCTION
Pole Position II, the sensational sequel to Pole Position, offers you a choice of four racetracks! The tracks—-FUJI, TEST, SUZUKA, and SEASIDE--are based on actual international raceways. The following instructions will help you change a Pole Position upright or sit-down game into a Pole Position II game. These modifications include changing the attraction glass (upright), changing the display shield, changing certain printed-circuit board (PCB) components, posting decals, and installing a new self-test chart. Figure 1 shows parts of the cabinet that are affected by these modifications.
SUPPORTING DOCUMENTATION
These instructions are designed to be used with the following documentation:
e ™-218 Pole Position Operation, Maintenance, and Service Manual @ sT-255 Pole Position II Self-Test Chart @ 218-12 Pole Position II Operator Information @ sPp-218 Pole Position Schematic Package or @ sP-219 Pole Position Schematic Package
After you have followed the instructions in this document, refer to CO-218-12 for additional information on Game Play, Self-Test, Option Switch Settings, and Schematic Package changes.
Before you start the enhancement procedures, UNPLUG THE GAME.
TM-255 Introduction
Right and Left - - Side Panel Decals Display Shield with Graphics Display Shield with Graphics
Right and Left Right and Left ‘Sido Pane! Decals—Aesr Side Panel Decals—Front
Attraction Glass and Film
Instrument Panel Decal Front Panel Decal Right and Left Control Panel Decals
CPU and Video PCBs Self-Test Chart See Figures 3 and 4 Includes Self-Test Informa- Modify these PCBs with ICs tion and Option Switch in the Electronics Kit. Settings—Inside the Cabinet.
Figure 1 Parts Affected by Enhancement Procedure
TM-255 Introduction
ENHANCEMENT KIT INVENTORY Before you start to modify the game, check the contents of the Pole Position II Enhancement Kit. The kit contents for upright games are listed in Table 1. The kit contents for sit-down games are listed in Table 2. If any item is missing, contact your Atari distributor.
Table 1 Enhancement Kit Contents——-Upright A041351-01 A
Part No. Quantity Description
| A041352-01 | 1 | Electronics Kit—-Includes the following: |
| 79-42C16 | 5 | 16-Pin socket |
| 79-42C18 | 2 | 18-Pin socket |
| 79-42C28 | 7 | 28-Pin socket |
136014-166--192 27 Integrated circuits
| 137351-001 | 1 | Pole Position II custom integrated |
circuit
| CO-218-12 | 1 | Pole Position II Operator Information |
| ST-255 | 1 | Self-test chart |
78-6900404 50 inches 1/4-Inch wide x 1/4-inch thick black foam tape (coated on 1 side)
| 037410-01 | 1 | Attraction glass |
| 041353-01 | 1 | Left side-panel decal* |
| 041353-02 | 1 | Right side-panel decal* |
| 041354-02 | 1 | Attraction panel film |
| 041355-03 | 1 | Instrument panel decal |
| 041356-01 | 1 | Video display shield with graphics |
| 041377-01 | 2 | Printed-circuit board label |
*The left and right-side panel decals are optional. Use the mailer card provided to receive your free decals.
TM-255 Introduction
Table 2 Enhancement Kit Contents—Sit—Down A041376-01 A
| A041352-01 | 1 | Electronics Kit—Includes the following: |
| 79-42C16 | 5 | 16-Pin socket |
| 79-42C18 | 2 | 18-Pin socket |
| 79-42C28 | 7 | 28-Pin socket |
136014-166--192 27 Integrated circuits
| 137351-001 | 1 | Pole Position II custom integrated |
circuit
| CO-218-12 | 1 | Pole Position II Operator Information |
| ST-255 | 1 | Self-test chart |
78-6900404 24 inches 1/4-Inch wide x 1/4-Inch thick black foam tape (coated on 1 side)
| 041377-01 | 2 | Printed-circuit board label |
| 041378-01 | 1 | Left side-panel decal (rear) |
| 041378-02 | 1 | Right side-panel decal (rear) |
| 041379-01 | 1 | Left side-panel decal (front) |
| 041379-02 | 1 | Right side-panel decal (front) |
| 041380-04 | 1 | Left control panel decal |
| 041380-05 | 1 | Right control panel decal |
| 041381-01 | 1 | Video display shield with graphics |
| 041382-01 | BE | Front panel decal |
T™M-255
Tools Required for Enhancement Introduction
The tools listed in Table 3 (or their equivalents) are required to complete this modification.
Quantity
PRP PRP eee Table 3 Tools Required for Enhancement
Description Purpose
1/8-inch Allen wrench Diagonal cutters Needle-nose pliers Solder sucker Solder wick Isopropyl alcohol Acid brush Phillips-head screwdriver 15 to 27 W soldering iron masking tape Squeegee stapler Install attraction glass Remove PCB components Install PCB components Remove solder from PCB Remove excess solder from leads Clean flux and debris from PCB Clean flux and debris from PCB Remove access panel and PCB Install PCB components Install decals Install decals Install self-test chart
Modification instructions for the upright cabinet begin on page 7; modification instructions for the sit-down cabinet begin on page 27.
TM-255 Upright Cabinet
Top Retainer
Film Foam Tape
Attraction Glass
Display Shield Retainer
Display Shield
Figure 2 Attraction Glass and Display Shield Replacement
'TM-255 Upright Cabinet
ENHANCEMENT PROCEDURE FOR THE UPRIGHT GAME
These procedures must be performed by qualified service personnel. UNPLUG THE GAME before starting the following procedures.
REPLACE THE ATTRACTION GLASS
This procedure is illustrated in Figure 2.
1. Use the 1/8-inch Allen wrench to remove the three screws and washers that fasten the top retainer to the cabinet. Remove the retainer. Save the retainer, washers, and screws for reassembly.
Loosen the three screws that fasten the bottom retainer to the cabinet.
Remove and discard the attraction glass. If there is a film behind it, remove and discard the film also.
Take the attraction glass, attraction film, and foam tape out of the enhancement kit. Place a strip of foam tape lengthwise along the top and bottom of the attraction glass.The tape on the glass should be toward you.
Put the attraction film behind the attraction glass. You should be able to read the film. Place the attraction glass and film in the bottom retainer.
Tighten the screws in the bottom retainer.
Reinstall the top retainer, using the washers and screws you saved in step 1.
REPLACE THE DISPLAY SHIELD
This procedure is also illustrated in Figure 2.
1.
2.
3. Use the 1/8-inch Allen wrench to remove the screws and washers that hold the display shield retainer in place. Save this hardware for reassembly.
Lift the display shield out of the cabinet.
Install the display shield contained in the enhancement kit.
TM-255 Upright Cabinet
- Reinstall the display shield retainer with the hardware you saved in step 1.
REMOVE THE PRINTED-CIRCUIT BOARDS
See TM-218 (Figures 1-1 and 1-2) for the location of the Central Processing Unit (CPU) printed-circuit boards (PCB) and the Video PCB.
If your game was built in the United States of America, the CPU and Video printed-circuit boards are attached to an Electromagnetic Interference (EMI) Shield printed-circuit board. If your game was built in Ireland, it will NOT have the EMI Shield printed-circuit board.
- Open the access panel at the rear of the game.
- Disconnect the two edge-connectors from the game PCB set. If your game has an EMI Shield PCB:
a. Disconnect the two edge-connectors from the EMI Shield PCB.
b. Pull the eight snap-in fasteners on the EMI Shield PCB to the unlocked position.
Be careful not to twist the printed-circuit boards as you remove them! If you do, components or connections may be loosened.
- Carefully slide the PCB set straight out of its guides.
- Carefully remove the EMI Shield PCB from the Video and CPU boards.
- Put the printed-circuit boards on a clean work surface.
TM-255 Upright Cabinet
MODIFY THE PRINTED-CIRCULT BOARDS
To avoid damage to the printed-circuit boards, remove them from the game before you attempt any modifications. Refer to "Remove the Printed-Circuit Boards" procedure given previously. Also, perform modifications only with the printed-circuit boards on a clean work surface.
To determine whether your printed-circuit board (PCB) set was designed by Atari or Namco, compare the PCB outlines with those shown in Figures 3 and 4, If you are modifying an Atari PCB set as shown in Figure 3, perform the procedure "Modifying the Atari PCB Set." If you are modifying a Namco PCB set as shown in Figure 4, perform the procedure "Modifying the Namco PCB Set."
Before modifying the printed-circuit boards, read "Soldering Precautions."
TM-255
as i"
a a ie
VIDEO PCB CPU PCB
Figure 3 Atari PCB Components Affected by Enhancement Upright Cabinet
TM-255 Upright Cabinet
CPU PCB VIDEO PCB
Figure 4 Namco PCB Components Affected by Enhancement
TM-255 Upright Cabinet
Soldering Precautions
Soldering Techniques Observe the following recommendations when Yemoving or installing components soldered to a PCB in this game. Poor soldering practices can damage a PCB or heat-sensitive electrical components.
Choosing the proper soldering iron is essential before attempting to remove or install soldered-in components. Excessive heat is a common cause of damage to a component or PCB. However, transient voltages from solder guns or improperly grounded soldering irons can also damage certain voltage-sensitive semiconductor devices.
A 15- to 27-watt pencil-tip soldering iron is recommended to avoid separating the etched circuit wiring from the board material and to avoid damaging active components. A temperature-controlled soldering station rated at 700°F with a fine cone or a very fine chisel tip can also be used.
Solder guns are not recommended for removing or replacing soldered-in components on a printed-circuit board. The added possibility for overheating and the large transient voltages induced by the solder gun could cause damage to heat- or voltage-sensitive devices.
The following additional equipment is recommended for removing and installing soldered-in components:
@ Solder Sucker--Hand-operated vacuum tool used to remove liquified solder from the PCB. Top-of-the-line Soldapullt® brand is recommended.
@ Solder Wick--Resin-soaked copper braid used for removing excess solder from the lead connections on the PCB. See "Removing Integrated Circuits" for precautions relating to the use of a solder wick on a PCB with plated-through holes.
e@ Flux Remover--Non-corrosive chemical used to clean foreign material from the PCB before soldering. Also used to remove any flux residue where components have been installed and to clean any foreign material from the PCB during preventive maintenance. Isopropyl alcohol is recommended.
TM-255 Upright Cabinet
@ Acid Brush--Small stiff-bristled paint or tooth brush used with flux remover to clean flux and other foreign material from the PCB.
Removing Integrated Circuits The easiest and safest method for Yemoving soldered-in integrated circuits (IC) from a PCB is to cut off each pin as close to the IC case as possible with a tip dyke or diagonal cutter as shown in Figure 5.
Use the proper soldering iron as described under "Soldering Techniques." Then, to avoid excessive heat buildup in one area of the PCB, apply heat directly to each pin in a random order. Remove the loosened pin with the tip of the soldering iron or a needle-nose pliers as shown in Figure 6. Allow a moment for the PCB to cool before proceeding to the next pin. Apply just enough heat to remove any stubborn pins.
Do not use a solder wick to remove solder from inside plated-through holes. The heat required for the solder wick to remove the solder from inside the hole could damage the PCB.
For a PCB with plated-through holes, use a solder sucker to remove the remaining solder from inside each hole as shown in Figure 7 . (If possible, suck the solder from the opposite side of the PCB from where the heat is applied.)
Do not use a solder wick to remove solder from inside plated-through holes. The heat required for the solder wick to remove the solder from inside the hole could damage the PCB.
TM-255 Upright Cabinet
3 Needle-Nose Pliers
h
Soldering Iron Diagonal Cutter
Figure5 Removing ICs (Cut Pin Method) Figure6 Removing IC Pins
Soldering Iron Solder Sucker
Soldering Iron
Solder Sucker
Preferred Method Alternate Method
Figure 7 Removing Solder from Plated-Through Holes
Soldering Iron Solder Wick
Figure 8 Removing Solder from Lead Connection Pads
TM-255 Upright Cabinet
Use a solder wick to remove excess solder from around the lead connection pads on the top or bottom surface of the PCB as shown in Figure 8.
Modifying the Atari PCB Set
Modifications to the Atari PCB set include replacing and addding integrated circuits and sockets to both the CPU PCB and the Video PCB. Be sure to observe the precautions given previously under "Soldering Precautions."
On the CPU PCB:
- Using the method shown in Figure 9, remove the integrated circuits at locations 3E, 3L, 4E, 4L, 7F, 7H, 12E, and 12F from their sockets.
The more recently produced Pole Position boards were manufactured to accommodate the parts in this enhancement kit. Therefore, your game CPU PCB may already have IC sockets at locations 3D, 4D, and 4K. If so, omit steps 2 and 3 and continue with step 4.
- Using the proper soldering techniques, remove the solder from the plated-through holes at locations 3D, 4D, and 4K.
- Remove three 28-contact IC sockets from the enhancement kit and install them on the PCB at locations 3D, 4D, and 4K. Be sure to observe the proper placement of the socket index as shown on the PCB.
- Using the information given in Table 4, remove each specified IC from the enhancement kit and install it in the proper socket.
TM-255
- Insert screwdriver tip under body of IC.
- Gently pry IC upward.
- Insert screwdriver tip under other side of body and gently pry upward.
- Lift IC out of socket.
Figure 9 Removing ICs from a Socket Upright Cabinet
TM-255 Upright Cabinet
Table 4 Atari CPU PCB Component Locations
IC Part No. CPU PCB Location
136014-176 3L 136014-177 4L 136014-178 3E 136014-179 4E
136014-180 7H 136014-181 12F . 136014-182 12E 136014-183 7E
136014-184 3D 136014-185 4D 137351-001 4K
On the Video PCB:
- Using the method shown in Figure 9, remove the integrated circuits at locations 6N, 7N, 12K, 12L, 13K, 13L, and 13N from their sockets.
- Using the method given under "Removing Integrated Circuits," remove the soldered-in IC at locations 4L, 5K, 8M, 11C, 11D, 11E, 12H.
- Remove the 24-contact IC sockets from the PCB at locations 6N and 7N.
- Using the information given in Table 5, remove the appropriate IC sockets from the enhancement kit and install each in the specified location.
TM-255 Upright Cabinet
Table 5 IC Socket Locations on the Atari Video PCB
No. of Contacts Install_at Location:
16 5K 16 8M 16 11ic 16 11D
16 11E 18 4L 18 12H 28 6N
28 7N 28 12M 28 13M
- Using the information given in Table 6, remove each specified IC from the enhancement kit and install it in the proper socket.
Table 6 Atari Video PCB Component Locations
IC Part No. Video PCB Location
136014-166 13K 136014-167 12K 136014-168 13L 136014-169 12L 136014-170 13N 136014-171 12N 136014-172 7N 136014-173 6N
136014-174 12M 136014-175 13M 136014-186 11E 136024-187 11D 136014-188 11c 136014-189 8M 136014-190 5K 136014-191 4L 136014-192 12H
TM-255 Upright Cabinet
Modifying the Namco PCB Set
Modifications to the Namco PCB set include replacing and adding integrated circuits and sockets to both the CPU PCB and the Video PCB. Be sure to observe the precautions given previously under "Soldering Precautions."
On the CPU PCB:
- Using the method shown in Figure 9, remove the integrated circuits at locations 4M, 8M, 4L, 8L, 5H, 6H, 5A, and 6A from their sockets.
The more recently produced Pole Position boards were manufactured to accommodate the parts in this enhancement kit. Therefore, your game CPU PCB may already have IC sockets at locations 3L, 3M, and 7L. If so, omit steps 2 and 3 and continue with step 4.
- Using the proper soldering techniques, remove the solder from the plated-through holes at locations 3M, 3L, and 7L.
- Remove three 28-contact IC sockets from the enhancement kit and install them on the PCB at locations 3M, 3L, and 4L. Be sure to observe the proper placement of the socket index as shown on the PCB.
4, Using the information given in Table 7, remove each specified IC from the enhancement kit and install it in the proper socket.
Table 7 Namco CPU PCB Component Locations
IC Part No. CPU PCB Location
136014-176 8M. 136014-177 8L 136014-178 4M 136014-179 4L
136014-180 6H 136014-181 6A 136014182 SA 136014-183 5H
136014-184 3M 136014-185 3L 137351-001 7L
TM-255 Upright Cabinet
On the Video PCB:
1.
2. Using the method shown in Figure 9, remove the integrated circuits at locations 1E, 1F, 4M, 3M, 1M, 4N, 3N, and 1N from their sockets.
Using the method given under "Removing Integrated Circuits," remove the soldered-in IC at locations 3C, 4D, 2H, 10L, 9L, 8L, 6M, and 2N.
- Remove the 24-contact IC sockets from the PCB at locations 1E and 1F.
- Using the information given in Table 8, remove the appropriate IC sockets from the enhancement kit and install each in the specified location.
Table 8 IC Socket Locations on the Namco Video PCB
No. of Contacts Install at Location:
16 2H 16 8L 16 oL 16 10L
16 4D 18 6M 18 8c 28 1E
28 iF 28 2M 28 2N
T™-255 Upright Cabinet
- Using information given in Table 9, remove each specified IC from the enhancement kit and install it in the proper socket.
Table 9 Namco Video PCB Component Locations
IC Part No. Video PCB Locations
136014-166 4N 136014-167 4M 136014-168 3N 136014-169 3M 136014-170 1N 136014-171 1M 136014-172 1F 136014-173 1E 136014-174 2M 136014-175 2N 136014-186 8L 136014-187 OL 136014-188 10L 136014-189 2H 136014-190 4D 136014-191 3c 136014-192 6M
TM-255 Upright Cabinet
SET THE OPTION SWITCHES
The manufacturer tested Pole Position II upright games and found that in an arcade environment, upright games have excellent earnings with switches set to sit-down game settings.
If you have an Atari PCB, the switch which controls game play options is located at 9L. (It is located at 9E if you have Namco PCBs.) We recommend that the game be set for 120 seconds preliminary game time, that the preliminary rank and extended rank levels are set to "B" (moderate difficulty), that the game is set for 5 laps per game, and that the game is played at high speed. To select these options, set the toggle switches as listed in Table 10.
If you have an Atari PCB, the switch which controls game price options and special play options is located at 9J. (It is located at 7E if you have Namco PCBs.) We recommend that the game be set for 50 cents per game, that the unit of speed is miles per hour, that the sound is on in the attract mode, and that the screen displays normal action (not frozen!) To select these options, set the toggle switches as listed in Table 11.
Please refer to CO-218-12 for more information about game options.
Table 10 Factory-Recommended Switch Settings for Play Options
Toggle Switches at 9L or 9E
| Cabinet | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
Sit-Down On Off Off Off Off Of€ On On
| Upright | Off | Off | Off | Off Off | Off | Off | On |
Table 11 Factory-Recommended Switch Settings for Price and Play Options
Toggle Switches at 9J or 7E
| Cabinet | 1 | 2 | 4.5 | 6 | 1 | 8 | ||
| Sit-Down | On | On | Off | On | Off | On | Off | oft |
Upright Off Off Off Off Off On Off Off
T™-255 Upright Cabinet
INSTALL THE PRINTED-CIRCUIT BOARDS
Two labels are included with your kit. After you have finished modifying the printedcircuit boards, peel each Pole Position II label off its protective backing and place it by the cable connector of each PCB as shown in Figure 3 or 4.
- Make sure the foam pad is secure between the Printed-circuit boards of the game set. Carefully slide the modified PCB set into the mounting guides.
Connect the edge-connectors to the game printed-circuit boards. Make sure these are firm connections. If your game has an EMI Shield PCB:
a. Push the eight snap-in fasteners on the EMI Shield PCB to the locked position.
b. Connect the two edge-connectors to the EMI Shield PCB.
- Close the access panel at the rear of the game.
INSTALL THE DECALS
The following decal installation procedure should be performed by two people. (One person may have difficulty handling the cabinet and the large decals.)
Three decals on the upright cabinet need to be attached--the left side panel decal, the right side panel decal, and the instrument panel decal (see Figure 1).
TM-255 Upright Cabinet
Adhesive is contained in small glass beads that are spread on the back of each decal. Pressure applied to these beads will cause them to break, and the decal will adhere immediately! Therefore, do not apply ANY pressure to the decal until it is exactly in the desired position.
- Mix a normal dishwashing solution of water and any liquid dishwashing detergent in a shallow pan.
- GENTLY lay the cabinet on its left side on a soft blanket.
- Thoroughly clean the side of the game cabinet to ensure the removal of all dust.
- Use a sponge to liberally apply the water and detergent solution over the entire side of the game cabinet.
- Carefully place the right side panel decal, sticky side down,in the center of the wet surface of the game cabinet. Position the decal within 1/4-inch of the edges of the right side panel. Handle only the edges of the decal, and do not press any part of the decal. Use masking tape to position the edges of the decal exactly where they should be.
- Use a squeegee to remove all the excess water and detergent from beneath it by quickly working from the center to the outside edges.
- When the wrinkles are removed and the decal is free of all excess water and detergent solution, carefully upright the cabinet. Then GENTLY lay the cabinet on its other side on a soft blanket.
- Repeat steps 2 through 7 for the remaining left side decal.
- Carefully upright the cabinet. GENTLY place the instrument panel decal directly over the instrument panel.
- Press the decal firmly and smoothly from the center to the outside edges of the decal.
- Use a lint-free cloth to wipe off any excess water and detergent from inside and outside of the cabinet. Allow time to dry before proceeding.
TM-255 Upright Cabinet
INSTALL THE SELF-TEST CHART
- Open the access panel at the rear of the game.
- Remove and discard the self-test chart that is in place.
- Staple the Pole Position II Self-Test Chart, ST-255, into place. (This chart contains important information about game settings.)
4, Close the access panel at the rear of the game.
PERFORM A SELF-TEST
CHANGE
Perform the self-test after the enhancement modifications are completed!
- Plug the game in.
- Set the power on/off switch to the on position.
- Perform the self-test procedure as described in CO-218-12 (Pole Position II Operator Information).
THE POLE POSITION SCHEMATIC PACKAGE
The Pole Position Schematic Package Supplement, SP-218, supports games with the Atari PCB set. The Pole Position Schematic Package Supplement, SP-219, supports games with the Namco PCB set. Refer to (O-218-12 (Pole Position II Operator Information) for changes to these schematic packages. Mark these changes into your schematic package!
After you have changed the schematic package, the enhancement procedure for the Upright cabinet is complete.
TM-255 Sit-Down Cabinet
Display Shield
Foam Tape
Wing Nut
Control Panel
Figure 10 Display Shield Replacement—Sit-Down
TM-255 Sit-Down Cabinet
ENHANCEMENT PROCEDURE FOR THE SIT-DOWN GAME
These procedures must be performed by qualified service personnel. UNPLUG THE GAME pefore starting the following procedures.
REPLACE THE DISPLAY SHIELD
This procedure is illustrated in Figure 10.
Have someone hold the control panel firmly against the cabinet while you are removing the wing nuts from the rear of the game. This prevents the top-heavy assembly from crashing against the cabinet.
Open the access panel at the rear of the game.
Reach toward the front of the game, and remove the wing nuts and washers that secure the control panel to the game cabinet. (Someone should hold the control panel against the cabinet as you do this!) Save this hardware for reassembly later.
Pull the bottom of the display shield toward you. Remove and discard this shield.
Apply a strip of foam tape to the front bottom of the display shield provided in the enhancement kit.
Insert the Pole Position II display shield. Close the control panel. Someone should hold the control panel against the cabinet as you reinstall the hardware.
From behind the cabinet, reinstall the wing nuts and washers you saved in step l.
'TM-255 Sit-Down Cabinet
REMOVE THE PRINTED~CIRCUIT BOARDS See TM-218, Figure 1-2, for the location of the game printed-circuit boards in the sit-down cabinet.
I£ your game was built in the United States of America, the CPU and Video printed-circuit boards are attached to an Electromagnetic Interference (EMI) Shield printed-circuit board. If your game was built in Ireland, it will not have the EMI Shield printed-circuit board.
- Open the door at the rear of the game. The printed-circuit boards are mounted on the door.
- Disconnect the two edge-connectors from the game PCB set. If your game has an EMI Shield PCB:
a. Disconnect the two edge-connectors from the EMI Shield PCB.
b. Pull the eight snap-in fasteners on the EMI Shield PCB to the unlocked position.
Be careful not to twist the Printed-Circuit Boards as you remove them! If you do, components or connections may be loosened.
- Carefully slide the PCB set straight out of the guides.
MODIFY THE GAME PCB
This procedure is the same as the procedure for the upright cabinet.
SET THE OPTION SWITCHES
After your PCB set has been modified, refer to "Set the Option Switches" on page 22 of this manual for information on setting the option switches.
TM-255 Sit-Down Cabinet
INSTALL THE PRINTED-CIRCUIT BOARDS
Two labels are included with your kit. After you have finished modifying the printedcircuit boards, peel each Pole Position II label off its protective backing and place it by the cable connector of each PCB as shown in Figure 3 or 4.
- Make sure the foam pad is secure between the printed-circuit boards of the game set. Carefully slide the modified PCB set into the mounting guides.
- Connect the edge-connectors to the game printed-circuit boards. Make sure these are firm connections. If your game has an EMI Shield PCB:
a. Push the eight snap-in fasteners on the EMI Shield PCB to the locked position.
b. Connect the two edge-connectors to the EMI Shield PCB.
- Close the door at the rear of the game.
Install the Decals
The following decal installation procedure should be performed by two people. One person may have difficulty handling the cabinet and the large decals.
Seven decals on the sit-down cabinet need to be replaced--two left side panel decals, two right side panel decals, two control panel decals, and the front panel decal (see Figure 1).
'TM-255
9.
10. Sit-Down Cabinet
A— CAUTION
Adhesive is contained in small glass beads which are spread on the back of each decal. Pressure applied to these beads will cause them to break, and the decal will adhere immediately! Therefore, do not apply ANY pressure to the decal until it is exactly in the desired position.
Mix a normal dishwashing solution of water and any liquid dishwashing detergent in a shallow pan.
GENTLY lay the cabinet on its right side on a soft blanket.
Thoroughly clean the side of the game cabinet to ensure the removal of all dust.
Use a sponge to liberally apply the water and detergent solution over the entire side of the game cabinet.
Carefully place the rear left side panel decal, sticky side down, in the center of the wet surface of the game cabinet. Position the decal within 1/4-inch of the edges. Handle only the edges of the decal, and do not press any part of the decal. Use masking tape to position the edges of the decal exactly where they should be.
Use a squeegee to remove all the excess water and detergent from beneath it by quickly working from the center to the outside edges.
Carefully place the front left side panel decal, sticky side down, in the center of the wet surface of the game cabinet. Position the decal within 1/4-inch of the edges. Handle only the edges of the decal, and do not press any part of the decal. Use masking tape to position the edges of the decal exactly where they should be.
When the wrinkles are removed and the decal is free of all excess water and detergent solution, carefully upright the cabinet. Then GENTLY lay the cabinet on its other side on a soft blanket.
Repeat steps 2 through 8 for the decals that belong on the right side panels.
Carefully upright the cabinet.
TM-255
ll.
12.
13.
14,
15. Sit—Down Cabinet
Use masking tape to position the edges of the front panel decal to within 1/4-inch of the edges of the front panel.
Use a squeegee to press the decal firmly and smoothly from the center to the outside edges of the decal.
GENTLY position the decal that has instructions for Pole Position II over the existing instructions on the control panel. Press the decal firmly and smoothly from the center to the outside edges of the decal.
Place the bonus points decal between the steering wheel and the shifter. Press the decal firmly and smoothly from the center to the outside edges of the decal.
Use a lint-free cloth to wipe off any excess water and detergent from inside and outside of the cabinet. Allow time to dry before proceeding.
'TM-255 Sit-Down Cabinet
INSTALL THE SELF-TEST CHART
- Open the door at the rear of the game.
- Remove and discard the self-test chart that is in place.
- Staple the Pole Position II Self-Test Chart, ST-255, into place. (This chart contains important information about game settings.)
- Close the rear door.
PERFORM A SELF-TEST
It is important to perform the self-test after the enhancement modifications are completed!
- Plug the game in.
- Set the power on/off switch to the on position.
- Perform the self-test procedure as described in CO-218-12 (Pole Position II Operator Information).
CHANGE THE POLE POSITION SCHEMATIC PACKAGE
The Pole Position Schematic Package Supplement, SP-218, supports games with the Atari printed-circuit boards. The Pole Position Schematic Package Supplement, SP-219, supports games with the Namco printed-circuit boards. Refer to CO-218-12 (Pole Position II Operator Information) for changes to these schematic packages. Mark these changes into your schematic package!
After you have changed the schematic package, the enhancement procedure for the sit-down cabinet is complete.
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
A.
ATARI
+ Were: communcstions Comoany ATARI, INC, 790 SYCAMORE DRIVE P.O. BOX 906 MILPITAS, CALIFORNIA 95035 408/942-3100 *' TELEX 35-7488