CATHODE RAY TOMES

Daytona USA Special Edition

Daytona USA (Revision A) (Sega, 1994) · Manual · 51 pages · 46 sections · original scan

Page 1

FIRST PRINTING OCTOBER 1996

SERVICE MANUAL

MANUAL NO. DYNN-00635

Page 2

GameWorks

Welcome to the

Service Department Home Page

The following options are available to you : © Look up you; tesal Sega Distributor © Go to Indivicual Manuals and Bulletins © Find ar: individual Part Number

¢@ Find a Manual Part Number

© Get Info on your Game Monitor © Get Info on your Board System © Talk to the Service Staff © Sign up to Receive Service Bulletins @ What is going on in Darl's Office

Sega GameWorks Service Department Phone (415)-802-1750 Fax (415)-802-1754

If you have any questions about this Home Page please E-Mail to: darl.davidson @sega.com

Page 3

TM

COPYRIGHT NOTICE

This SEGA product has a copyright notice as follows: © 1996 Sega Enterprises, Inc. (USA) All rights reserved.

This signifies that this work was disclosed in 1996 and is the property of SEGA ENTERPRISES, INC. (USA).

Every effort has been made to ensure that this manual is accurate. Sega Enterprises, Inc. (USA) is not liable for any printing or clerical errors.

Specifications noted herein are subject to change without notice.

Page 4

Contents

INTRODUCTION OF THE OWNER’S MANUAL SAFETY CERIFICATION AND GENERAL PRECAUTIONS HANDLING PRECAUTIONS INSTALLATION LOCATION PRECAUTIONS SPECIFICATIONS INSTALLATION ITEMS AND HARDWARE ASSEMBLING THE MACHINE LEG LEVELERS POWER-ON CHECKS EXPLANATION OF TEST AND DATA DISPLAY SERVICE PANEL TEST MODES COIN/CREDIT TABLES COIN MECH ADJUSTMENTS AND CARE MONITOR ADJUSTMENT PERIODIC INSPECTION ITEMS TROUBLE SHOOTING GAME BOARD GAME BOARD SERVICE RECORD DESIGN RELATED PARTS PARTS IDENTIFICATION MANUAL COMMENTS WIRING DIAGRAM/SCHEMATIC

ii

Page 5

GAME REGISTRATION INFORMATION

Please take a moment to complete the following information about your new Sega game. This information will be essential to you in the future, should you need to request parts or service information, or should you sell or transfer the machine.

Game Name: DAYTONA USA SPECIAL EDITION

Date of purchase:

Distributor: Salesperson: Phone number:

Game moved or sold (date):

NOTES:

Page 6

INTRODUCTION OF THE OWNERS MANUAL

SEGA ENTERPRISES, LTD., has for more than 30 years been supplying various innovative and popular amusement products to the world market. This Owners Manual is intended to provide detailed descriptions together with all the necessary installation, game settings and parts ordering information related to the DAYTONA USA SPECIAL EDITION, a new SEGA product.

This manual is intended for those who have knowledge of electricity and technical expertise, especially in ICs, CRTs, microprocessors, and circuit boards. Read this manuai carefully to acquire sufficient knowledge before working on the machine. Should there be « malfunction, non-technical personnel should under no circumstances touch the interior system. Should the need arise, contact our main office, or the closest branch office listed below.

SEGA ENTERPRISES, INC. (USA) Customer Service 45133 Industrial Drive Fremont, CA 94538 Phone 415-802-1750 Fax 415-802-1754 7:30 am - 4:00 pm, Pacific Standard Time Monday thru Friday

Page 7

General Precautions

Follow Instructions: All operating and use instructions should be followed. Attachments: Do not use attachments not recommended by the product manufacturer as they may cause hazards. Accessories: Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use only mounting accessories recommended by the manufacturer. Moving the Product: This product should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product to overturn. Ventilation: Slots and openings in the cabinet are provided for ventilation, to ensure le operation of the product and to protect it from overheating; these openings must not be blocked or covered. The openings should never be blocked by placing the product in a built-in installation such as a bookcase or r2ck waiess proper ventilation is provided or the manufacturer’s instructions have been adhered to. Power Sources: This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your location, consult your local power company. For products intended to operate from battery power or other sources, refer tc: the “perating instructions. Grounding or Polarization: This product is equipped with a three-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to veplace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug. Power Cord Protection: Power-suppiy cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against thers, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. Overloading: Do not over!oaé wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. Object and Liquid Nnéry: Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Servicing: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Damage Requiring Service: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

  • If the power cord or plug is damaged;
  • If liquid has been spilled, or objects have fallen into the product;
  • If the product has been exposed to rain or water;
  • If the product does not operate normally when following the operating instructions. Adjust only those controls that are explained in the operating instructions. An improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation;
  • If the product has been dropped or damaged in any way;
  • When the product exhibits a distinct change in performance; this indicates a need for service. Replacement Parts: When replacement parts are required, be sure the service technician has used replacements parts specified by the manufacturer or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. Safety Check: Upon completion of any service or repairs to this product, ask the service technician to perform
Page 8

safety checks to determine that the product is in proper operating condition. Heat: The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. Cleaning: When cleaning the monitor glass, use water or glass cleaner and a soft cloth. Do not apply chemicals such as benzine, thinner, etc. Location: This an indoor game machine, DO NOT install it outside. To ensure proper usage, avoid installing indoors in the places mentioned below: + Places subject to rain/water leakage, or condensation due to humidity; In close proximity to a potential wet area;

  • Locations receiving direct sunlight; ¢ Places close to heating units or hot air; eIn the vicinity of highly inflammable/volatile chemicals or haz: ws matter;
  • On sloped surfaces; «In the vicinity of emergency response facilities such as fire exits and fire extinguishers;
  • Places subject to any type of violent impact;
  • Dusty places.

INSTALLATION PRECAUTIONS © Verify the amperage of the branch civ.-ait outlet before plugging in the power plug. Do not overload the circuit. « Avoid using an extension cord. If one is required, use an extension cord of type SJT, 16/3 AWG rated min. 120 VAC, 7A.

  • Moving this unit requices a minimum clearance (of doors, etc.) of 32” (W) by 77” (H). + For the operation of this machine, secure a minimum area of 32” (W) by 42”(D).

REGULATORY APPROVALS This game kas Seen tested and found to comply with the Federal Communications Commission Rules. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This game has been tested and listed by Underwriters Laboratories, Inc., to ANSI/UL22. LISTED

SK92

AMUSEMENT MACHINE

Page 9

SPECIFICATIONS

Seat Assembly

Width~-LengthHeight
Crated24.25”42.5”47”
Assembled21.25”38”44,5”

Monitor Assembly

Width Length Height

Crated35.5”43.5”73”
Assembled31.75”39”70”

Monitor 26” Wells Gardner Monitor 25K5191 Power AC 345W 3A Weight 140 Ibs 120 Ibs

Weight 450 Ibs 430 Ibs

Page 10

INSTALLATION AND HARDWARE

When transporting the machine, make sure that the following parts are supplied. ary. DESCRIPTION Key, Coin Mech Door Key, Cash Box (Behind Coin Mech Door) Key, Rear Service Door (Behind Coin Mech Door) Owners manual, Daytona Fiber Optic Cable Wrench, T-20 torx tamperproof Wrench, T-27 torx tamperproof Wrench, T-15 torx tamperproof PREHENNN

PERFORM THE ASSEMBLY WORK. 6Y FOLLOWING THE PROCEDURE STATED HEREIN. FAILURE TO COMPLY WITH THESE INSTRUCTIONS CAN RESULT IN ELECTRIC SHOCK.

WHEN ASSEMBLING, 2, SURE THAT TWO OR MORE PERSONS ARE AVAILABLE TO PERFORM THE WOX«.. IN SOME CASES, ATTEMPTING THE ASSEMBLY WORK ALONE CAN RESULT IN INJURY OR DAMAGE TO THE GAME AND ITS PARTS.

When carrying out the installation instructions, follow the sequence outlined below.

Connect the cabinets. Secure in place Connect power supply Perform the assembly check PRP

Note that for installation work, a master key and other hardware are required. Refer to the preceding list of installation items.
Page 11

CONNECT THE CABINETS

The brackets for connecting the seat and monitor cabinets are shipped attached to the game. All hardware is attached to the brackets at the time of shipping.

To assemble the two cabinets, remove all retaining hardware and move the cabinets to their installation position.

Bring the seat and monitor cabinets together, at the installation position.

Align the connection bracket on the seat and monitor cabinets and fasten securely with the hardware provided.

To move the game, first disassemble the connecting bracket. Mo 901 attempt to move the game with the cabinets connected. To do so can cause damage to the cabinets and bracket assembly.

Page 12

SECURING IN PLACE (LEG ADJUSTERS)

This machine-has 2.casters and.8 leg. adjusters. When the-installation position is determined, cause the leg adjusters to come into contact with the floor, and make adjustments so that the casters are raised approximately 5 mm. above the floor, and the machine is level.

Make sure that all of the leg adjusters are in contact with

A the floor. If they are not, the

CAUTION! cabinet can move causing an accident.

Move the machine to the installation position. When instaliimg the machine against or close to a wall, be sure to secure a passage space to enable the piayer to take a ride in the machine.

Have the leg adjusters make contact with the floor. ‘Yo keep the machine level, adjust the height of the leg adjuster upward using a wrench.

After making adjustments, fasten the !cg adjuster nut upward and secure the height of the leg adjuster.

CASTER

Approx. 50

iG AD.

Page 13
  • MEMORY TEST Assembly Check caer Teer In the Test mode, ascertain that the assembly has been made correctly and IC Board is satisfactory. ry wen en zgne Gee In the test mode, perform the following tests: foe Rom BOARD

fate CAL BOARD ‘ee 9000 sete 0000 ‘ea, 000 "089000

  • Memory Test Selecting the Memory Test on the test mode menu screen causes tne cn-board memory

to be tested automa’ iy. The game board

is satisfactory if the display beside each IC number shows COD. BRRREGEEE G80 fb 8 aH 88 ‘e000, ‘000 ‘2000 ‘9000

‘9000 e000

‘000 ‘9000 ‘2000 ‘2000 (9000 ‘9000 ‘2000, ‘9000 ext SOESEESES F555 SSRpEE OnE ESGEGGSGE TEST BUTTON TO:

  • INPUT TEST
  • (nput Test Seiecting the Input Test on the test mode menu screen causes the screen (on which

each switch is tested) to be displayed. Press

each switch. For the coin switch test, insert a coin from the coin inlet with the coin chute door open. If the display beside each switch indicates ON, the switch and wiring connections are satisfactory. SIGRGERRIE

  • OUTPUT TEST
  • Output Test In the Output Test mode, carry out the lamp test to ascertain that each lamp lights up satisfactorily.
Page 14
  • SOUND TEST
  • Sound Test In the Test mode, selecting Sound Test causes the screen (on which sound-related board and wiring connections are tested) to be displayed.

Be sure to check if the sound is satisfactorily emitted from each speaker and the sound volume is appropriate.

  • C.R.T. TEST
  • C.R.T. Test ta the Test mode menu, selecting C.R.T. Test allows the screen (on which the monitor is tested) to be displayed. Although the monitor adjustments have been made at the time of shipment from the factory, color deviation, etc. may occur due to the effect caused by geomagnetism, the location building's steel frames and other game machines on the periphery. By watching the test mode screen, decide whether an adjustment is needed. If it is necessary, adjust the monitor by referring to the Monitor Adjustments TT}] section.

The weight of the machine is approximately 560 Ibs. When moving the machine on the floor, be sure to retract the leg adjusters so that the casters make contact with the

CAUTION! floor. Attempting to push the machine with leg adjusters extended can cause the machine to fall, causing injury and damage.
Page 15

EXPLANATION OF TEST AND DATA DISPLAY

By operating the switch unit, periodically perform the tests and data check. When installing the machine initially, or collecting cash, or when the machine does not function properly, perform checks in accordance with this section.

The following test modes should be utilized as applicable.

= z

. Check to see that each setting is per standard setting

made at the time of shipment. . Inthe INPUT test mode, check each SW and VR. . In the OUTPUT test mode, check each of the lamps. In the MEMORY test mode, check the IC’s on the

Memory i

memory test to be perfcgm

RAMs, ROMs and IC Monthly Servicing .

  • Ascertain cash setting.
  • Inthe INPUT test mode, test the CONTROL device.

OUTPUT test 7 check each of the la

Contro] System R.

| In the MONITOR ADI USTMENT mode, check to see 1! {the MONITOR adjustment is correct.

  • MEMORY TEST
  • Inthe SOUND test mode, check the sound related ROMs. eck such data as game play time and histogram to adjust the difficulty level, etc.
Page 16

Switch Unit

The tests or data check are performed when initially installing the machine, when collecting cash, or when the machine does not function correctly. The switch unit is used to access the various tests and modes listed below. Refer to the explanations given in this section to perform each type of test.

MONITOR

TEST SERVICE ADJUSTMENT

eo

Open the coin chute door, and the switch unit will appear. The functioning of each switch is as follows:

Test Button For handling of the Test Button, refer to the following pages. Service Button Gives credits without registering on the coin meter.

Sound Volume Adjusts the volume of the monitor's right-hand side and lefthand side speakers.

Monitor Adjustment Eliminates color unevenness from the screen.

Do not touch places other than those specified. Touching places not specified can cause an electric shock or short circuit accident.

WARNING!

ll

Page 17

Test Mode

The Test Menu allows the functioning of each part of the Cabinet to be checked, the monitor to be adjusted, and the coins and game related various settings to be performed. ° Press the Test Button to cause the following Test Menu to be displayed on the monitor. ° Press the Service Button until the arrow —> is moved to the desired item to make a selection ° Bring the arrow —> to the desired item and press the Test Button to enter the selected item's test.

° Choosing EXIT and pressing the Test Button will finish the test mode, and the game inode returns on the screen after network checking.

GAME SYSTEM DIN ASSIGNMENT INPUT Trav ourpur (Sst DRIVE 2a TEST SA80 TST

1G, 8.2 TEST MENU

When changes are made in the Game Assignments, Coin Assignments and Volume settings, be sure to exit from the test mode to return to game mode, If the power is turned off in test mode, the setting can not be re-written.

Page 18

BOOKKEEPING

Selecting bookkeeping in the menu mode causes the bookkeeping data up to the present to be displayed.

Press the test button or start button to return to the menu screen. Press the VR1 red button to proceed to the next page.

COIN CHUTE #1 XXX0Q0OXK COIN CHUTE #2 0000000 TOTAL COINS XXQ00000

COIN CREDITS X000000K SERVICE CREDITS X0000000C TOTAL CREDITS 000O00Y%,

NUMBER OF GAWES Y2(O00%% TOTAL TIME rae YocdxxS, GAME PLAY TIME chruxtixxlixxS AVERAGE GAME TIME wxlixxS LONGEST GAME Tie = xxldxxS SHORTEST (07% TIME — xxldxxS

STAAT = TO EXIT RED > -TO. OTHER PAGE -

FIG. £21 BUOKKEEPING

COIN CHUTE #

TOTAL COINS

COIN CREDITS

SERVICE CREDITS

TOTAL CREDITS

TOTAL TIME Number of coins put in. As seen from the front of the cabinet, the right hand side is #1 and the left hand side is #2.

Total number of activations of coin chutes. Number of credits repistered by inserting coins.

Credits registered by service switch.

Total number of credits (coin credits+service credits).

The total energized time.

Page 19

(BOOKKEEPING. TOTAL PLAY GAMES xxxxxxxxGAES BEGINNER COURSE xxxxxxnxGANES BOALS wHKXKKK AVERAGE PLAY TIME = xxlixxS FASTEST GOAL TIME = xxttexS ADNAICED COURSE woouucnrGANES GOALS ron AVERAGE PLAY TIME — xxlbcxS PASTEST GOAL TIME — xxbixxS EXPERT = COURSE xonxxxxyGANES QOALS xow00m

AVERAGE PLAY TIME

FASTEST GOAL TIME dordborS srdboS:

FRG. 8. 3b BOOKKEEPING

BEGINNER COURSE Beginser course’s game play frequency. ADVANCED COURSE Advanced course’s game play frequency. EXPERT COURSE Expert course’s game play frequency.

GOALS Total number of goals each course.

Press the Test SW or Start button to return to the menu mode screen. Press VR1 red button to proceed to the other page.

Page 20

Game System

Selecting the GAME SYSTEM (See Fig. 11) in the menu mode causes the present game settings to be displayed and allows setting changes to be made. Each GAME SYSTEM setting is explained below.

LINK ID:

CAR NUMBER:

CABINET:

COUNTRY:

DIFFICULTY:

ADVERTISE SND: GAME SYSTEM LINK ID SINGLE CAR NUMBER 1

CABINET STAND ALONE

COUNTRY USA

DIFFICULTY NORMAL

ADVERTISE SOUND CN GAME MODE NORMAL RIVAL ARROW ON >> EXIT

GREEN RED YELLOW BLUE STARS CURSOR.UP CURSOR DOWN MODE UP MODE DOWN TO SELECT

Stardard setting is “SINGLE”. For linked units, set one to “MASTER” and the restof the seats to “SLAVE”. The game setting and coin setting, etc. of the MASTER seat apply to all SLAVE seats. Changes made to SLAVE seats are not effective.

For linked play between 2 or more machines, the machines are numbered in sequential order: No. 1, No. 2, No. 3, ... No. 8. Numbering is done starting from the left, facing the monitor screen. If the same number is used for 2 or more cabinets or if cabinets are numbered in an incorrect sequence, the onscreen display may be confused.

Setting of cabinet type. Set to “STAND ALONE?” for this machine.

Message language. Choices are “USA”, “EXPORT”, and “JPN”.

The game difficulty is classified into 4 different categories from “EASY” to “HARDEST”. The standard setting is “NORMAL”.

Set to “OFF” to have machine silent during standby. Standard setting is “OFE”

Page 21

GAME MODE: Selection of lap count ranges for BEGINNER, ADVANCED, and EXPERT courses. Allows lap count to be changed for specific attraction event pur poses. Ranges are: “NORMAL” (8, 4, 2 laps), “GRAND PRIX” (20, 10, 5 laps), and “ENDURANCE?” (80, 40, 20 laps).

SETTING CHANGE PROCEDURE

  • Press the SERVICE switch or VR1 (red) OR VR2 (green) to move the arrow (>>) to the desired item.
  • Choose the desired setting change item by using one of: VR2 (blue). VR3 (yellow), the TEST switch, or the START button.
  • To return to the MENU mode, move the arrow to EXIT aris press the TEST switch or the START button.
Page 22

Coin Assignments

This mode permits you to set the start number of credits, as well as the basic numbers of coins and credits. This mode expresses "how many coins correspond to how many credits". Seung. change is not effective until Exiting. Be sure to Press test to Exit after setting

COIM ASSIGNMENT CREDIT TO START eRepiT(s) CONN/CREDIT SETTING #1 cHTE! 1COIN ICREDIT

CHUTE2 TCOIN ICREDIT

FIG. 8.5 COIN ASSIGNMENTS

Credit to Start Sets the number of credits required when starting the game. Credit to Continwe —_ This sets the number of credits required to continue game. Coin/Credit Setting | How many coins correspond to how many credits. In this machine, selection as per the adjacent chart is possible. Manual Setting Allows for finer settings. See chart.

  • Press the Service button or Shift button to bring the arrow to the desired change item.
  • Press the Test button or the Start button to select the setting change item.
  • Move the arrow to Exit and press the Test button or the Start button to return the menu mode to the screen.
Page 23

TABLE 8. 10a COIN/CREDIT SETTING (COIN CHUTE COMMON TYPE) [SETTING | FUNCTIONING COIN CHUTE #1 | FUNCTIONING COIN CHUTE #2

SETTING #1 | 1 COIN1_CREDITT_COIN1_ CREDIT
ING #21 COIN2 CREDITS1 COIN1 CREDIT
SETTING #3 [| 1 COIN3_ CREDITS1 COIN1_ CREDIT
| SETTING #5[1 COIN5_ CREDITS| COIN1_ CREDIT

| SETTING #6 |" COIN 2 CREDITS | 1 COIN 2 CREDITS [SETTING #7 [1 COIN 5 CREDITS [1 COIN 2 CREDITS | SETTING #8 ITS

SETTING #10COIN$_ CREDITS

COIN 6 CREDITS SETTING #12 SETTING #13 SETTING #14 SETTING #15 INS 1 CREDIT 1 CREDIT INS 2 CREDITS 1 CREDIT INS 3 CREDITS

COIN 3 CREDITS

=fr]ej—

Z $3

SETTING #17 SETTING #18 SETTING #19 qufacturers kx ommended Setting

SETTING #20

“"$ COINS 1 CREDIT

COIN 2 CREDITS

SETTING #23

CREDITS CREDITS

SETTING #25 CREDIT

COINS CREDITS COINS CREDITS COINS CREDITS COINS CREDITS

CREDITS

CREDIT

CREDITS

2 COINS 2 CREDITS 3 COINS 3 CREDITS

§ COINS 4 CREDITS

COINS 6 CREDITS

SETTING #26 wn el pwn lw a

Q Z a

we z nan

Page 24

Input Test

When Input Test is selected, the monitor will show the following, allowing you to watch the status of each switch. On this screen, periodically check the status of each switch. ° By pressing each switch, if the display on the right-hand side of the name of each switch changes to ON from OFF, the switch and the wiring connections are satisfactory. When the Controller (Lever) is operated in the direction of the arrow, the right-hand side indication of the Switch name becomes ON.

To check Coin Chute #1 and Coin Chute #2 Coin Switches, open the Coin Chute Door and insert coin(s) into the slot.

To return to the Menu mode, press the Test button.

INPUT TEST

CHUTE!OFFCHUTE
SHIFT!«OFFSHEETS
SHIFTZ= OFFSHIFTS

vRI OFF VR3 OFF START «= SE TEST-Sk SF HANDIZZ = xxxH ASS. xh we xxx

RED & BLUE : TO EXIT

FIG. 8.6 INPUT TEST

Page 25

Output Test

Selecting Output Test allows the status of each lamp to be viewed. Periodically check the status of each lamp on this screen.

<— Repeatedly displays sequentially in order of start lamp, view change and danger lamp. a this time lamp tests are performed in the manner corresponding to the item displayed.

This game does not have 7-SEG LED. During the display of 7-SEG, only the Start button flashes.

° While this screen is displayed, the Start button continues to flash.

° Press the Test button to return to the menu mode.

START LAMP OFF VIEW CHAMSE LAMP OFF

DANGER LAY? OFF
  • ENT

SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON

Page 26

CRT Test Choose CRT Test to display the screen on which the Monitor adjustment is checked. By watching the screen, periodically check if adjustments are needed or not. For adjustment, e Section of Monitor Adjustment stated herein. refer to #l

In adjacent figure, check the Monitor's color adjustment. Perform color adjustment by watching this screen. | The color bar of 4 colors, i.e. red, green, blue and white is darkest at the left end and becomes brighter towards the right end.

In this figure, check the Monitor size and position adjustment by watching the screen.

Adjust the Monitor in the manner so that the crosshatch lines do not go beyond the screen. Adjust the Monitor to ensure that crosshatch lines do not have distortions.

Press the Test button to return to the menu mode.

__|_ PRESS TEST BUTTON TO EXIT |

Page 27

DRIVE BOARD TEST

Choosing Drive Board Test allows the reaction mechanism of the steering wheel to be checked. Also, this enables the VR value for the steering wheel's drive board and the settings of the dip switches on the drive board to be checked.

1 2 3 DIP SM: OFF OFF OFF OFF OS

FIG. 8.8 DRIVES TEST

Bring the arrow -> to the desired item by using the service switch or VR1 (red) or VR4 (green). The steeviig wheel functions to the esting selected by the arrow. Pressing VR2 blue) or VR3 (yellow) allows the force transmitted to the steering wheel to increase or decrease.

SPRING Status in which the motor and clutch are not activated. Centering of the handle is caused by only the spring inside the handle mechanism. CLUTCH Status in which the clutch is activated. The handle is fixed. CENTERING Status in which the handle returns to the center position by itself. UNCENTERING _ Status in which the handle is caused not to be in the center. ROLL LEFT Status in which the handle is rotated in the left hand direction.

ROLL RIGHT Status in which the handle is rotated in the right hand direction. EXIT Returns to the menu mode.

Page 28

HANDLE Displays the Handle VR value. Make sure that the appropriate VR value is as follows: Under 2 DH <--_7D~83H --> Over D3H

Left Centering Right

DIP SW Displays the setting status of dip switches on the drive bd.

Dip Switch Setting Table The setting of the dip sw nos 1-4 on the drive board allows the handle’s weigh (feeling) to beret and ON or OFF of the power on check to be selected. Dip sw nos 5 and 8 are to be off.

Note: Shaded portion refers to the settings at the time of shipment.

HANDLE’ S WEIGHT

POWER ON CHECK

y

When dip sw changes are made, be sure to turn the power off and then back on again. The new setting will not be effective unless power is turned off then on.

The handle’s reaction mechanism is subject to change. When the reaction becomes lighter, change the dip sw setting.

DRIVE BOARD ERROR DISPLAY When malfunctioning occurs in the drive board, testing will not be performed even if the drive board test is selected. In this case, the error will not be displayed by the 7-seg display on the drive board.

Also,.when. power on.check error occurs, the 7-seg display data. repeatedly flashes.. First, check the handle mecha’s VR, the motor, clutch, etc.

Page 29

Sound Test Selecting Sound Test allows sounds (sound effects, announcement, background music, etc.) to be chosen and heard. In this mode, check the sound-related IC Board and each speaker. Press the Service button to bring the arrow —> to the desired sound item. Press the Test button to have the selected sound played. Each time the Test button is pressed, the next sound is played.

Page 30

TGP TEST

The TGP test allows on-screen related ICs to be checked. As shown, GOOD is dis-

played for all if satisfactory. Press the test

utton or start button to return to the menu screen.

FAG. 8. 10 TGF TEST

MEMORY TEST The memory test mode is for checking the on-board memory IC functions. GOOD is displayed for normal ICs and BAD for abnormal iCs.

MEMORY TEST I 7 oD IG, 18 Oxo ie, 12 S00

it. 46 G000 #. 49 G00

  • 88 6000

FIG, 8. 11 MEMORY TEST When the test is completed, if the results are as shown above, testing is satisfactory.

It takes approximately 30 seconds to complete the test. If the period exceeds thirty seconds, there may be a malfunction.

After finishing the test, pressing the test sw or start button allows the menu mode to return to the-sereen.

Page 31

BACK UP RAM CLEAR

FIG, 3. 12 BACKUP G1 CLEAR

Clears the contents of buckkeeping. When clearing, brizg the arrow --> to YES, when not clearing, to NO by using the service switch or VRI (red) or VR4 (green) buttons, and then press the test switch or start button. When the data has been cleared, COMPLETED will be displayed. Bring the arrow back to NO and press the test switch to return to the menu screen. ‘

Also, note that the game setting contents are not affected by the back up clear operation.

Page 32

HANDLING THE COIN JAM If the coin is not rejected even when the REJECT button is pressed, open the coin chute door and open the selector gate. After removing the jammed coin, put a normal coin in and check to see that the selector correctly functions.

CLEANING THE COIN SELECTOR

The coin selector should be cleaned once every 3 months. When cleaning, follow the procedure below: @® Tum the power for the machine OFF. Open the coin chute door, Open the gate and dust off by using a soft brush (made of wool, etc.). @ _ Remove and clean smears by using a soft cloth dipped in water or diluted.chemical detergent and then wrung. @® _ Remove the CRADLE. When removing the retaining ring (E ring), be very careful so as not to bene the shaft. iS)

@® Remove stain from the shaft and pillow portions by wiping off with a soit cloth, etc. © After wiping off as per © a! apply a dry cloth, etc. te cause selector to dry completely.

@ Never agply machine oil, etc, te the Coin Selector. Afisr cleaning the Coin Selector, insert a regular coin in the normal working status and ensure that the Selector correctly functions.

COIN INSERTION TEST Once every month, when performing I ql

the Coin SW Test, simultaneously vhile keeping

check the following: phe Reject y

utton pressed 7 down and check 4 O_ Does the Coin Meter count satisfactorily? if it is CO Does the coin drop into the Cashbox : correctly? C1 Is the coin rejected when inserted while CON METER keeping the Reject Button pressed down?

FAG. 10¢

Page 33

CAUTIONS AND WARNINGS CONCERNING THE SAFETY

FOR HANDLING THE MONITORS

Before handling the monitors, be sure to read the following explanations and comply with the caution/ waming instructions given below. Note that the caution/warning symbol marks and letters are used in the instructions. Indicates that handling the monitors erroneously Indicates that handling the monitors by disreby ding this warning may cause a garding this caution may cause a potentially potentially hazardous situation, which could hazardous situation, which could result in WARNWG — result in death or serious injury. personal injury and or material damage. ‘CAUTION

Indicates that access to a specific part of the Indicates the instruction to disconnect a power equipment is forbidden. connector or plug.

external connectors to and from monitor interior and the monitor, be sure to discoms:ct the power connector (plug) before starting the work. Proceeding the work without following ¢nis instruction can cause shock or malfunctioning. @ Using the monitor by converting it without obtaining a prior permission is sot allowed. SEGA shall not be liable for any malfunctioning and accident caused by said convers ( @ When performing such work as installing and removing the monitor, inserti arsi disconnecting the

@ Primary side and Secondary side SECONDARY SIDE The monitor's circuit which is divided into the Primary side and (Chassis, CRT) Secondary side, is insulated. Do not touch the primary side, or

WARNING do not touch both the primary side and the secondary side simultaneously. Not following the instruction can cause Swck and this is very dangerous. When making monitor adjus:ments, use a non-conductive driver and make adizsiment

without touching any part other than the Adjustment V. R. and @®

knob. Also, be sure not to cause a short-circuis «9 the Primary side and Secondary side. If short-circuited, it may cause shock or malfunctioning, which is very dangezous. @ High-tension Voltage Some of the parts inside monitor arc sudject to high-tension voltage in excess of 20,000 volts and very dangerous. Therefore, be sure wo" t¢ touch the monitor interior. Should soldering & paper wastes, etc. be mixed in the monitor intczior, (arm: the power off so as not to cause malfunctioning or fire hazard.

DEMAGNETIZER. PRIMARY SIDE COIL | Matn BD

SECONDARY SIDE (Chassis, sheet metal work, CRT, etc.)

@ Connecting the CRT and PCB For combining the CRT and PCB, usc the specified part No. to maintain the status of adjustments made at ‘couron the factory. The anode of the CRT itself will be accumulatively charged as time clapses, generating hightension voltage which is very dangerous. The monitor should be used with the Chassis, CRT and PCB assembled. When repair, etc. is required at the time of malfunctioning, be sure to send it in an “as is assembled” condition. If these are disassembled, what's charged to said high tension voltage can be discharged, causing a very hazardous situation. Therefore, under no circumstances should it be disassembled. @ Static Electricity Touching the CRT surface sometimes causes you to slightly feel electricity. This is because the CRT surfaces.are subject to static and will not adversely affect the human body. @ Installation and removal Ensure that the Magnetizer Coil, FBT (Fly-Back Transformer), Anode Lead and Focus Lead are not positioned close to the sheet metal work's sharp edges, etc. and avoid damaging the insulated portions so us not to cause shock and malfunctioning. (For the name of parts, refer to the above Figures),

Page 34

PERIODIC INSPECTION TABLE

The items below require periodic check and maintenance to retain the performance of this machine and ensure safe business operation.

Be sure to clean the interior of the cabinet and inspect and clean the power]

supply plug once per year. Using the cabinet with dust accumulated can} cause a malfunction or fire. Note that careless cleaning work can cause an accident and therefore, proper attention must be paid to ensure continued safe operation of this product.

Controller VR Value Check

Coin Chute Tower Check coin switches Coin Insertion Test Coin Selector Cleawng [Monitor

Page 35

TROUBLES HOOTING

The items listed below will assist in troubleshooting when a problem occurs. As a first step, check all wiring connector connections and verify AC power to the machine.

TROUBLESHOOTING

When the main SW is turnedThe cord is not plugged in.Firmly insert the plug into the outlet.

ON, the machine is not Incorrect power source/voltage. | Make sure that the power supply activated. voltages are correct. Primary or secondary fuse First, veinove the cause of blown. overcurrent, then replace the fuse. MONITOR screen is blackened | Primary or secondary fuse ; TFint, remove the cause of and the fluorescent lamp does overcurrent, then replace the fuse.

Defective connections between | Make sure of correct connections g between boards.

MONITOR screen is incorrect. The on-screen image of the wer source and voltage - | Make sure that the power supply

monitor sways or shrinks.are nov correct.voltages are correct.
Marquee lamp doesn’t light up.\ Fluorescent lamp needsReplace lamp.

Hi replacement. The connector is disconnected. | Check connector connections in the marquee. Primary fuse is blown. Replace fuse. Sound is not emitved. Sound volume adjustment is not | Adjust the service panel volume correct. control knob. Malfunctioning of sound board | Perform the SOUND TEST. and/or memory. Connector connection is Check connection from base to incorrect. Machine Gun and Missile firing | SW Malfunction. operation is not satisfactory. Gun trigger part no: 509-5457 Missile Trigger part no. 509-5458 Game makes sounds, but has no | Secondary fuse blown. Replace the secondary fuse. picture.

Page 36

Install Unit per installation Instructions

@

Marquee Lamp On? ‘Yes———»

Connect PowerCord ‘Yes: & Tum on Switch

Yes

Reset Circuit Breaker

Contact Sega Technical Tf Service

TROUBLESHOOTING CHART

Page 37
WARNING! circuit accident. the interior parts of the product. @ In order to prevent an electric shock, be sure to turn off power before performing work by touching]

@ Be careful so as not to damage the wiring. Damaged wiring can cause an electric shock or short

Do not expose the game board, etc, without a good reason. In this product, setting changes are made during the test mode. The game board need not be operated. Use the game board etc, as is with the settings made at the time of shipment.

REMOVING THE GAME BOARD

To replace the IC boards, such as the game board, drive board, etc,, or to change the dip switch settings, take out the IC board using the following procedure.

Turn the main switch off. At the rear of the unit, find the rear access door. Remove the 2 tamperproof screws with.the wrench.provided. Open the rear door sising the back door key.

Take off the 3 screws to remove the case lid. The game board is contained in the shield case.

Page 38

SCREW (4) 2 SCREW {7) M335, using flat & 3X75, using flat & spring washers spring washers

Page 39

GAME BOARD SERVICE RECORD

This page is provided for your use in tracking repairs or replacements of your Sega game PCBs and assemblies. This information can help provide a service history for your game should it ever be sold or transferred.

DATE BOARD ASSY NO. PC3 SERIAL NO. RMA NO.

Page 40

| —_———-— OPTIONAL HEADER

FIXTURE DYNN-00636

STW-00257 ALIGHT St vv-00258 ____—__—-_— BILLBOARD PLATE DYN1-0202

STEERING WHEEL

DYN1-1201

Y 4 SPEED SHIFTER

UPPER SEAT

DYN1-2131

LOWER SEAT

or DYN1-2132

SEAT SLIDE ASSY

  • BYNN-00638

ASSY CNTRL PNL DYN1-12001 IN DOOR ASSY & IRC-00436, SHIFTER COVER B DYN-1223

POWER SUPPLY STW-00045 FOOT PEDAL ASSY

Page 41

ASSY VIRTUAL BUTTON DYNO-1290

Page 42

by NEw 130-5156 ASSY SPEAKER

Page 43

ASSY HANDLE MECHA (DYN-1250)

Page 44

[em _| PART NUMBER DESCRIPTION ose

CLUTCH PULLEY A.

[ VRBRACKET SWING ARM SHAFT ‘GUIDE HOLDER A GUIDE HOLDER B STOPPER RUBBER DYN-1259

( N

Vor WEAR 41122 [6 stc-1130 ADJUST RING SLC-141X \ “WHITE CAM 2B SOR-2112 “REARING SHAFT [eves | FLT ws 31120

SOR-213 SJ sOR2NS [SPACER [xeysxio DYN:1Z74 GUARD BRKT.

E : §

:

CTT alalels é a :

Page 45

ASSY HANDLE MECHA (DYN-1250)

| trem | rarrnumper| vescrirnon| NOTE
[__207 | coo-rongoew| MSCRPHW/rsMaxeTi

[__ 208 noopoosizw | MSCRPHW/PSMaxi2 208 | covroosies OT MSCRPHWysMaxig

210| coopocscswT MSCRPHW/FsMsxeTOCsd

Ey _ | 2t2T a6o-Fnogoo | rerwsur as ERING7MM t

[214| oes ssieigLT WSHIR 4 4-16X1.6w)

|__2is___ | oe-agoss-p_ | SETSCRHEXSKT.CUPPM3X8

26SETSCRHEX SKTCUPPM&X3Le C— SY
27UNUTMSPO
[21a | aso-rioasooHEX NUT MGCT
219UNUTMBal_
20MSCRPH W/S MAX ___ t—CsSC‘sdS

{2 | ooo-rnosto ;_ iz

222FLT WSHR 83Cd

ee

|| seven||
Page 46

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 47

ps

[9 ‘| ovc-r18RUBBER DUMPERF
| im| BvG.1410PUSH ROD PINL

LINK ROD. mG) [a avez TORSION SPRING ACCEL

[a3| vcasigTT Torsion spring 8Pe
[| ave-iatgRUBBER STOPPER,I
ps| avcttsis| PEDAL SHAFT:TT
Ps| ovc.1s6SWING ARM STOPPERCd

SPACER ee

[as| cuca cearriateCO
Pte komavr racKeTCo
aeePE

TS MS rn SEAR 20 15 P|

Ldi|

/_ SCREW MS ZN 06-32X06 PH PN |

L203|| SCREW MS BO0es2xI2PHPN Of
|__ 205|[NUTHExMe
[2m¢[| WASHER FLDOLIA6xn/a2xa/e2_|

(207) y [ “WASHER sPLIFLOCK 13/i6xi2xa7@ | __—————~d |___205_ | SS |_ WASHER SPLITLOCK 1/4000] |__ 2 |_wasuersrumuockea [20 | {RING “E" 0513925 es [_WASHERFL.801/2X7/32x1/16 ps waster ros |__| ovnases ers i2222x05 a

Page 48

ADDITIONAL PARTS

833-10651 837-10539 837-10652 839-0683 839-0657 839-0658 838-10018 839-0542 DYN-1222 DYN-1223 601-7489 350-5235 600-6275-0300 600-6275-0500 211-5479 000-T00412-0C 068-441616-0C 100-5170 100-5188 130-5156 838-10646 GAME BOARD DAYTONA TWIN 10 BOARD DAYTONA SOUND BOARD DAYTONA TWIN FILTER BOARD MODEL 2 MAIN TWIN FILTER BOARD DAYTONA IO A FILTER BOARD DAYTONA IO B AMP BOARD SERVO AUDIO MIX BOARD SHIFT COVER A SHIFT COVER B PARTICLE CLUTCH BRAKE MOTOR AC 100V 1250/1550RPM W/ii ASSY CABLE 05 0300CM ASSY CABLE 05 0500CM CONN OPT JOINT M SCR TH CRM M4Xi2 FLT WSHR CRM 4.4-16X1.6 BEARING DERURING BEARING SPEAKER. 8X 8 OHM 20 WATT DRIVE 8D DAYTONA TWIN

Page 49

DAYTONA SPECIAL EDITION MANUAL COMMENTS

SEGA has made every effort to ensure that this manual is accurate. If you find any errors or omissions, or have other comments on the DAYTONA SPECIAL EDITION manual, please write them below, detach, and deliver this page by FAX or mail to:

SEGA ENTERPRISES INC. (USA) ATTN: Stephanie Voss 45133 Industrial Drive Fremont, CA 94538 USA FAX: (415) 802-1754

Comments:

Optional Identification Information:

Name: Company: Address: City, State, Zip: Phone: FAX:

Page 50

ry SE om ‘ge wu 23

i DRIVE BD DAYTONA TWIN 939-0683 MAIN FILTER 333.

herr t 110651 DAYTONA GAVE BOARD

1ev DC Fan

cau aa tie an

: : a Pay 1937-10599 1/0 BOARD DAYTONA

2h0~ indus atriel _ t, CA 94538)

Page 51

SEGA ENTERPRISES, INC. (USA) 45133 Industrial Drive Fremont, CA 94538 415-802-1750 phone 415-802-1754 fax