Outrun 2 Twin
OutRun 2 (Rev A) (GDX-0004A) (Sega, 2003) · Manual · 120 pages · 30 sections · original scan
1ST PRINTING DECEMBER ‘03 www.sauservice.com
(I mn Twin Version
Owner’s Manual
NS, ES 4
SEGA AMUSEMENTS ik INC. ANUAL NO. 999-1982 GAME CODE: ORT
VISIT OUR WEBSITE!
eee @ SegaService.com @qaese x 828 fp? ss @ Back Forward Stop _Refresh Home AutoFill Print Mail Olc @ http://www seuservice.com/ @ mac osx © Microsoft MacTopia ©) SegaService.com @ SAU Parts Site @) Mac OS x Hints - Get the most from Xt @ Microsoft Outlook Web Access - Logon sainoney | &
“Burnin F LEDs "Bu
3 a 4 "Bulletins g *Dari's Office 3 = Game Manuals "*se ren = "What's New
: If you have any questions or comments about this site please E-Mail to Darl.Davidson@seu.sega.com
a
= a 00 gle 2 G [what's new] [manuals] [bulletins] [assemblies] [specials] [Search] [staff] [Darl's office] Bape [Return/Parts Policy] [warranty] [corporate info] [plugins] [Non-framed page] You will need the following items to view this page in its entirety. . weenie [Sega Amusements USA we! igeeaat’ 45133 Industrial Dr Fremont,CA 94538
All Platforms Windows — Macintosh
(415) 701-6580
@ internet zone \A
BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: To maintain the safety:
To ensure the safe usage of the product, be sure to read the following before using the product. The following instructions are intended for the users, operators and the personnel in charge of the operation of the product. After carefully reading and sufficiently understanding the warning displays and cautions, handle the product appropriately. Be sure to keep this manual nearby the product or elsewhere convenient for referring to it when necessary.
Herein, explanations which require special attention are enclosed with dual lines. Depending on the potentially hazardous degrees, the terms of WARNING, CAUTION, etc. are used. Be sure to understand the contents of the displays before reading the text.
Indicates that mishandling the product Indicates that mishandling the product by by disregarding this warning will cause disregarding this caution will cause a slight a potentially hazardous situation which hazardous situation which can result in
For the safe usage of the product, the following pictographs are used:
Indicates “HANDLE WITH CARE.” In order to protect the human body an equipment, this display is attached to places where the Owner’s Manual and or Service Manual should be referred to.
© Perform work in accordance with the instructions herein stated. Instructions for work are explained by paying attention to the aspect of accident prevention. Failing to perform work as per the instructions can cause accidents. In the case where only those who have technical expertise should perform the work to avoid hazardous situation, the instructions herein state that the serviceman should perform such work.
© Be sure to turn off power before working on the machine. To prevent electric shock, be sure to turn off power before starting the work in which the worker touches the interior of the product. If the work is to be performed in the power-on status, the Instruction Manual herein always states to that effect.
© Be sure to ground the Earth Terminal (this, however, is not required in the case where a power cord with earth is used). This product is equipped with the Earth Terminal. When installing the product, Connect the Earth Terminal to the “accurately grounded indoor earth terminal” by using an earth wire. Unless the product is grounded appropriately, the user can be subject to electric shock. After performing repair, etc. for the Control equipment, ensure that the Earth Wire is firmly connected to the Control equipment.
© Ensure that the Power Supply used is equipped with an Earth Leakage Breaker. This product does not incorporate the Earth Leakage Breaker. Using a power supply which is not equipped with the Earth Leakage Breaker can cause a fire when earth leakage occurs.
© Be sure to use fuses which meet the specified rating. (only for the machines which use fuses). Using fuses exceeding the specified rating can cause a fire and electric shock.
© Specification changes (removal of equipment, conversion and addition) not designated by SEGA are not allowed. The parts of the product include warning labels for safety, covers for personal protection, etc. It is very hazardous to operate the product by removing parts and or modifying the circuits. Should doors, lids and protective parts be damaged or lost, refrain from operating the product, and contact where the product was purchased from or the office herein stated. SEGA shall not be held responsible for any accidents, compensation for damage to a third party, resulting from the specifications not designated by SEGA. Ensure that the product meets the requirements of appropriate Electrical Specifications. © _ Before installing the product, check for Electrical Specifications. SEGA products have a nameplate on which Electrical Specifications are described. Ensure that the product is compatible with the power supply voltage and frequency requirements of the location. Using any Electrical Specifications different from the designated Specifications can cause a fire and electric shock. Install and operate the product in places where appropriate lighting is available, allowing warning labels © tobe clearly read. To ensure safety for the customers, labels and printed instructions describing potentially hazardous situation are applied to places where accidents can be caused. Ensure that where the product is operated has sufficient lighting allowing the warnings to be read. If any label is peeled off, apply it again immediately. Please place an order with where the product was purchased from or the office herein stated. When handling the Monitor, be very careful. (Applies only to the product w/monitor.) © _ Some of the monitor (TV) parts are subject to high tension voltage. Even after running off power, some portions are still subject to high tension voltage sometimes. Monitor repair and replacement should be performed only be those technical personnel who have knowledge of electricity and technical expertise. Be sure to adjust the monitor (projector) properly. (Applies only to the product w/monitor.) © __ Do not operate the product leaving on-screen flickering or blurring as it is. Using the product with the monitor not properly adjusted may cause dizziness or a headache to an operator, a player, or the customers. When transporting or reselling this product, be sure to attach this manual to the product. In the case where commercially available monitors and printers are used in this product, only the contents relatfe) ing to this product are explained herein. Some commercially available equipment has functions and reactions not stated in this manual. Read this manual together with the specific Instruction Manual of such equipment.
Descriptions herein contained may be subject to improvement changes without notice. The contents described herein are fully prepared with due care. However, should any question arise or errors be found, please contact SEGA.
INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION.
Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately after transporting to the location. Nevertheless, an irregular situation may occur during transportation. Before turning on power, check the following points to ensure that the product has been transported in a satisfactory status. Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet? Are Casters and Adjusters, damaged? Do the power supply voltage and frequency requirements meet with those of the location? Are all wiring connectors correctly and securely connected? Unless connected in the correct direction, connector connections can not be made accurately. Do not insert connectors forcibly. Do power cords have cuts and dents? Do the fuses used meet specified rating? Is the Circuit Protector in an energized status? Are all accessories available? Can all Doors and Lids be opened with the Accessory keys? Can Doors and Lids be firmly closed?
TABLE OF CONTENTS
BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING: TABLE OF CONTENTS
INTRODUCTION OF THE OWNER’S MANUAL
MPwYNS
en
10.
ll.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22. HANDLING PRECAUTIONS
PRECAUTIONS CONCERNING INSTALLATION LOCATION
OPERATION .....
NAME OF PARTS
ACCESSORIES .
ASSEMBLING AND INSTALLATION
PRECAUTIONS WHEN MOVING THE MACHINE
GAME DESCRIPTION .... _
EXPLANATION OF TEST AND DATA DISPLAY ..
HANDLE MECHANISM
SHIFT LEVER ...
ACCEL & BRAKES(S) COIN SELECTOR ....
MONITOR
PERIODIC INSPECTION TABLE
ERROR CODES
GAME BOARD ..
NETWORK PLAY ....
DESIGN RELATED PARTS .
PARTS LIST
WIRE COLOR CODE TABLE
WIRING DIAGRAMS .... CouUue oN
10-12 13 - 22
24-35 36 - 60 61-63
64-65 66 - 67 68 - 70 71-72
73-74 75 - 80 81-92 93 - 98
100 - 109
XXX
SPECIFICATIONS Installation Space : 80 inches width X 73 inches Deep Height : 71.75 inches Width : 74.3 inches Length : 68 inches Weight : 1565 Ibs Power, maximum current : 1200 W 10A (AC 120V 60 Hz AREA)
MONITOR : 29 inch supplied by Sanwa 29E31S Monitor Part# 998-0162 Chassis Part # 998-0161
INTRODUCTION OF THE OWNERS MANUAL
This Owner's Manual is intended to provide detailed descriptions together with all the necessary information covering the general operation of electronic assemblies, electromechanicals, servicing control, spare parts, etc. as regards the product, OUTRUN 2 TWIN TYPE. This manual is intended for the owners, personnel and managers in charge of operation of the product. Operate the product after carefully reading and sufficiently understanding the instructions. If the product fails to function satisfactorily, non-technical personnel should under no circumstances touch the internal system. Please contact where the product was purchased from.
Use of this product is unlikely to cause physical injuries or damages to property. However, where special attention is required this is indicated by a thick line, the word "IMPORTANT" and its sign in this manual.
Indicates that mishandling the product by disregarding this display can cause the product's intrinsic performance not to be obtained, resulting in malfunctioning.
Ferrari
+ All trade marks used with permission of the owners. + AMD, the AMD ARROW Logo and combinations thereof are trademarks of Advanced Micro Devices, Inc.
DEFINITION OF LOCATION MAINTENANCE MAN AND SERVICEMAN
Non-technical personnel who do not have technical knowledge and expertise should refrain from performing such work that this manual requires the location's main-
Ensure that parts replacement, servicing & inspections, and troubleshooting are performed by the location's maintenance man or the serviceman. It is instructed herein that particularly hazardous work should be performed by the serviceman who has technical expertise and knowledge.
The location's maintenance man and serviceman are herein defined as follows:
"Location's Maintenance Man" : Those who have experience in the maintenance of amusement equipment and vending machines, etc., and also participate in the servicing and control of the equipment through such routine work as equipment assembly and installation, servicing and inspections, replacement of units and consumables, etc. within the Amusement Facilities and or locations under the management of the Owner and Owner's Operators of the product.
Activities of Location's Maintenance Man : Assembly & installation, servicing & inspections, and replacement of units & consumables as regards amusement equipment, vending machines, etc.
Serviceman : Those who participate in the designing, manufacturing, inspections and maintenance service of the equipment at an amusement equipment manufacturer. Those who have technical expertise equivalent to that of technical high school graduates as regards electricity, electronics and or mechanical engineering, and daily take part in the servicing & control and repair of amusement equipment.
Serviceman's Activities : Assembly & installation and repair & adjustments of electrical, electronic and mechanical parts of amusement equipment and vending machines.
LISTED
5K92 ®
AMUSEMENT MACHINE
Notes:
- HANDLING PRECAUTIONS
When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that the player can enjoy the game safely. Non-compliance with the following points or inappropriate handling running counter to the cautionary matters herein stated can cause personal injury or damage to the machine.
(0?) Before performing work, be sure to turn power off. Performing the work without turning power off can cause an electric shock or short circuit. In the case work
(10?) For the IC board circuit inspections, only the logic tester is allowed. The use of a multiple-purpose tester is not permitted, so be careful in this regard.
@ PRODUCTION DATE #
This SEGA product was produced in the year of:
2003
This signifies that this work was disclosed in 2003
- PRECAUTIONS CONCERNING INSTALLATION LOCATION
This product is an indoor game machine. Do not install it outside. Even indoors, avoid installing in places mentioned below so as not to cause a fire, electric shock, injury and
LIMITATIONS OF USAGE REQUIREMENTS
Be sure to check the Electrical Specifications. Ensure that this product is compatible with the location's power supply, voltage and
Operation Area
A\
WARNING!
@
IMPORTANT!
@ For the operation of this machine, secure a minimum area of 80 in. (W) * 73 in. (D). In order to prevent injury resulting from the falling down accident during game play, be sure to secure the minimum area for operation. @ Be sure to provide sufficient space so as to allow this product's ventilation fan to function efficiently. To avoid machine malfunctioning and a fire, do not place any obstacles near the ventilation opening. SEGA shall not be held responsible for damage, compensation for damage to a third party, resulting from the failure to observe this instruction.
MAX. 10 A (AC 120 V 60 Hz) a For transporting the machine into the location's building, the minimum necessary dimensions of the opening (of doors, etc.) are 40 in. (W) and 67 in. (H).
-— Electric current consumption — _ 143 in Gin.
Bin, over ** Note: Image differs from actual product.
FIG. 2 WEL
- OPERATION
PRECAUTIONS TO BE HEEDED BEFORE STARTING THE OPERATION
To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of the visitors and players. AN In order to avoid accidents, check the following before starting the operation: IPNIV(! @ To ensure maximum safety for the players and the customers, ensure that where the
Ensure that all of the SUPPORT BRACKET are in contact with the floor.
‘ote: Image differs from actual product.
Ensure that all of the Adjusters are in contact with the floor.
Do not put any heavy item on this product. Placing any heavy item on the product can cause a falling down accident or parts damage.
To avoid injury, be sure to provide sufficient space by considering the potentially crowded situation at the installation location. Insufficient installation space can cause
PRECAUTIONS TO BE HEEDED DURING OPERATION (PAYING ATTENTION TO CUSTOMERS)
To avoid injury and trouble, be sure to constantly give careful attention to the behavior and manner of the visitors and players.
nN To avoid injury and accidents, those who fall under the following categories are not
- allowed to play the game.
mn To avoid electric shock and short circuit, do not allow the customers to unplug the power plug without a justifiable reason.
WARNING!
This product is intended for 1 Player only per seat. Playing the game by 2 or more Players riding on the seat together can cause falling down and collision accidents by striking head, hand, or elbow.
@Caution the player so as not to hold a child in her/his lap to play. Failure to observe this may cause the child to be caught between the Control Panel and the player and fall down.
nN Immediately stop such violent acts as hitting and kicking the product. Such
violent acts can cause parts damage or falling down, resulting in injury due to 4 ragments and falling down.
CAUTION! fi d falling d
Instruct the Player to adjust the seat before playing the game. Playing the game in a forcible posture can cause a contingent accident.
2uservice.com 7 www.
- NAME OF PARTS
29 IN MONITOR,
CONTROL PANEL,
SHIFT LEVER
** Note: Image differs from actual product. a
+t S
| - | - | - | = | . | FIG. 4a OVERVIEW |
/ | AC UNIT
| 4 | Wh | rm | F| | Ly |
| ‘al | | | 1 |
Te acri
| iv | Uf | fo | Of |
FIG. 4b REAR VIEW IMF
oe
TABLE 4 Dimensions and Weights
| Width | x Length x | Height | Weight | ||
| CABINET I | 44inx | 68in | x | 71.75in | 865 LB |
| CABINET 2 | 36.75inx | 68in | x | 71.75 in | 700 LB |
| When assembled | 80.75inx | 68in | x | 71.75in | 1565 LB |
- ACCESSORIES
When transporting the machine, make sure that the following parts are supplied. Magnetic cards for the recording of play results, and cleaning kits for cleaning the head of the card reader/writer are sold separately. Subsequent purchases of these items can be made by contacting the office listed on this Owner's Manual or the dealer from whom the product was originally purchased. Be sure to provide the part number(s), name(s), and required number of items.
TABLE 5 a ACCESSORIES
KEY MASTER KEY DESCRIPTION OWNER'S MANUAL 9301A (2) (2) Part No. (Qty.) 999-1982 For opening/closing For the CASHBOX DOOR Notes the doors Figures Parts not labeled with part numbers are as yet unregistered or cannot be registered. Be sure to The Keys are inside the Coin handle all parts with care, as some parts are not available for purchase separately. Chute Door at the time of shipment from the factory.
ASSY CAT 5 ETHERNET (NETWORK CABLE) 600-7269-0500 (1) 5m TAMPERPROOF WRENCH T-27 Torx 1/4-20 (1) T-25 Torx 10/32 (1) T-20 Torx M4 (1) T-15 Torx 8/32 (1) T-10 Torx (1) Tool
The following Table 5b lists the parts that are separately marketed but are necessary when booting this product's software. When having unpacked the shipping crate, make sure that all the parts in this Table 5b are in the crate. If not so, contact where you have obtained the product.
TABLE 5 b (XKT-0833 : GD-ROM DRIVE KIT)
GD-ROM DRIVE XKT-0833 Device that loads the software in a GD-ROM disc. see 5 of Section 6.
TABLE 5c
GD ROM KIT ORT CUSHION SPONGE 601-11137 (1) GD-ROM Disc Protector
KEY CHIP (1)
0)
This carton box is a standard accessory of the GD-ROM drive.
HOW TO USE THE CARTON BOX (GD-ROM DRIVE)
(08) When you want to order for replacing or repairing
service of the GD-ROM drive that is used by the product, pack it in a carton box as instructed below, ' and then deliver the carton box to a service agent. If you do not observe the
- ASSEMBLING AND INSTALLATION
Perform assembly work by following the procedure herein stated. Failing to comply with the instructions can cause electric shock hazard.
Handle molded parts with care. Undue weight or pressure may cause them to break and the broken pieces may cause injury.
When carrying out the assembling and installation, follow the following 4-item sequence. 1 | SECURING IN PLACE(ADJUSTER ADJUSTMENT) 2 | INSTALLING THE GD-ROM DRIVE(SETTING GD-ROM DISC) 3 | POWER SUPPLY, AND EARTH CONNECTION 4 | TURNING POWER ON
Tools such as a Phillips type screwdriver, wrench, socket wrench and Ratchet Handle are required for the assembly work.
== WRENCH SOCKET WRENCH.RATCHET HANDLE —_ TI Phillips type screwdriver
1 SECURING IN PLACE (ADJUSTER ADJUSTMENT)
mAN Make sure that all of the adjusters are in contact with the floor. If they are not, the = = cabinet can move and cause an accident.
WARNING!
This product has 8 casters and 8 Adjusters. (FIG. 6. 2a) When the installation position is determined, cause the adjusters to come into contact with the floor directly, make adjustments in a manner so that the casters will be raised approximately 5 mm from the floor and make sure that the machine position is level.
ADJUSTER
@ Transport the product to the JUS’
installation position.
@ Have all of the Adjusters make contact with the floor. Adjust the Adjuster's height by using a wrench so that the machine position is kept level.
@ After making adjustment, fasten the Adjuster Nut upward and secure the fe) height of Adjuster. CASTER
FIG. 6.2 a BOTTOM VIEW
- Note:Picture may differ from actual unit.
ADJUSTER
Ia; : ) Bien FASTEN UPWARD. a lL ((. we — S \\_ ADJUSTER
FIG. 6. 2b ADJUSTER CASTER
t Approx. 5mm
743 in,
28 in. over ** Note: Image differs from actual product.
FIG. 6.2¢ Provide ventilation space for the ventilation opening. Allow more than 28 in. of space for customer traffic. ‘ul g ‘xodde quo,
“Ul EL
INSTALLING THE GD-ROM DRIVE (SETTING GD-ROM DISC)
Carefully handle the GD-ROM drive so as not to contaminate the disc and the readout lens with stains and dust particles.
@ Unpack the shipping crate, and take out the GD-ROM drive, GD-ROM drive bracket, and GD- ROM disc.
a — - »
GD DRIVE BRACKET GD-ROM DRIVE
PHOTO 6.3 a
@ Use the 4 tapping screws to fix the GD-ROM drive bracket onto the GD-ROM drive. Be careful about a fixing direction.
TAPPING SCREW (4) M4x8
GD DRIVE BRACKET
FIG. 6.3b
@ Remove the | truss head screw that fixes the GD-ROM drive lid (DISC LID). And turn clockwise the lid to remove.
TRUSS SCREW (1)
PHOTO 6. 3b
@ Set the GD-ROM disc onto the GD-ROM drive with its labeled side facing upward.
@ Return the lid to its original place, and fix it with 1 truss head screw. Be careful not to fasten the screw too tightly.
PHOTO 6.3 ¢ |TRUSS SCREW (1)
@ Undo the lock on the side of the unit base and remove the Truss screws.
@ Turn the knob to open the lock, and lower the seat towards the backrest. Slowly lower the backrest until it touches the floor to prevent damage to the seat components. Put a drop cloth on the floor to prevent damaging the surface of the seat components.
DROP CLOTH TO PREVENT DAMAGE TO SURFACE OF PARTS. UNLOCK va
TRUSS SCREW (2)) black
- Note Figure may appear different then actual product. FIG. 6.3 b
@ Attach the GD-ROM drive with 3 screws.
PHOTO 6. 3d
@ Connect the GD cable connector (for data communication) to the DIMM board.
GD CABLE CONNECTOR
PHOTO 6.3
@ Insert both the GD cable connector (for data communication) and the power cord connector into the GD-ROM drive. Be careful about an inserting direction in this instance. Make sure that the connectors are inserted firmly and completely. Secure the cable with the cord clamp.
GD-ROM DRIVE __-~sa8)
Power Cord connector
Secure the cable.
PHOTO 6.3 f£
Attach the accessory stickers to both the Game Board and the Media Board.
KEY CHIP MEDIA BOARD
PROJECTION a
FIG. 6.5¢
Return the ASSY MAIN BD (now installed with the GD-ROM drive) into the PTV cabinet. Following the above-described actions in a reverse order, fix the base, connect the connectors, and clamp the wires/cables.
3 POWER SUPPLY, AND EARTH CONNECTION
mAN Be sure to independently use the power supply socket outlet equipped with
: "ah an Earth Leakage Breaker. Using a power supply without an Earth Leakage
The AC Unit is located on one side of Cabinet. The AC Unit has Main SW, Earth Terminal and the Inlet which connects the Power Cord.
@ Ensure that the Main SW is OFF. -— per =<
° °
cS ° °
MAIN SW | fr ® Hel - ez a8 | ad INLET Main SW off ° @
° ° °
FIG. 6.4a AC unit
- Note: Actual Power Supply connection may vary from photo
AC Cable (Power Cord) eee,
4 TURNING POWER ON
Turn on the AC unit's main switch to supply power to the unit. Once power is turned on, the fluorescent lamp lights up. The Start System Screen displays after a lapse of several seconds. It is followed by the screen that indicates that the network is currently being checked if the communication mode has been set. If there is a bad or improper communication connection, each screen will not proceed to the next, remaining on the currently Network Check Screen. If this occurs, resolve the error according to the instructions in this document.
If the communication mode has not been set or the communication check ends normally, the Motor Check Screen returns. While the Motor Check Screen is on-screen, the steering wheel can move either clockwise or counterclockwise. If you touch the wheel, the motor check is hindered and the game will not operate normally. So, you must not touch it at this time. Failures are displayed, if found. Resolve the errors according to the instructions in this document.
Once all the above steps have been completed, the Advertise Screen displays and voices are output through the left and right loudspeakers, unless you have set the machine so that no voices are output during the Advertise mode.
This product retains the number of credits and the ranking data even after the power is turned off. It does not retain data about the fractional number of coins (i.e., the number of coins not reaching one credit) or the bonus adder count.
Fluorescent lamps are always lit.
On-screen images are outputted.
- Note: Picture may differ from actual unit.
FIG. 6.5
- PRECAUTIONS WHEN MOVING THE MACHINE
A\
WARNING!
A
CAUTION
@ When moving the machine, be sure to unplug the power plug. Moving the machine with the plug as is inserted can damage the power cord and cause fire and electric shock hazards. @ When moving the machine on the floor, retract the Adjusters and ensure that Casters make contact with the floor. During transportation, pay careful attention so that Casters do not tread power cords and earth wires. Damaging the power cords can cause electric shock and short circuit hazards. Do not push the cabinet from the left/right when attempting to move the unit. Pushing from the sides may cause the unit to tip and result in injury and damage to parts.
Do not push on any parts made of glass (e.g. CRT screen) or plastic, as these parts may break and result in bodily injury.
** Note: Image differs from actual product.
Do not push the cabinet from the left/right direction.
- GAME DESCRIPTION
The following explanations apply to the case the product is functioning satisfactorily. Should there be any moves different from the following contents, some sort of faults may have occurred. Immediately look into the cause of the fault and eliminate the cause thereof to ensure satisfactory operation. When the power is connected, the fluorescent lamp in the FL box is always on. When in an advertising state, the screen displays the demonstration pictures and ranking data. Sounds are heard from the speakers on the right and left of the monitor. The advertising sounds are not heard if you have set this function to off (disabled). The start button and the change view button on the control panel are integrated with a lamp.
On-screen inges are outputlte
COIN INLET
** Note: Image differs from actual product. FIG. 8a
BASIC CONTROLS
Insert a coin and press the Start Button to begin a game. Choose your car, background music, and other options. View choices with the Steering Wheel, and enter your selection with the Gas pedal.
During game play, use the Gas pedal to accelerate your car, and the Brake pedal to stop. The Gear Shifter can be used to shift up and shift down when using Manual transmission.
You can switch between three different view settings with the View Change Button.
STEERING WHEEL GEAR SHIFTER (GEAR POSITION)
START BUTTON VIEW CHANGE BUTTON
BRAKE PEDAL
GAS (ACCEL) PEDAL
FIG. 8b
GAME OUTLINE
This is a driving game. The player controls a car (Ferrari), listening to great music and enjoying roadside scenery in the company of a gorgeous female passenger, all while racing towards the goal before time is up. The time limit is extended at each checkpoint. The game ends when the player runs out of time or reaches the goal.
Each game stage ends with a fork in the road where the player must decide the route using the car during the race. There are a total of fifteen stages, and five separate goal areas.
The three single player game modes are OutRun Mode, Heart Attack Mode, and Time Attack Mode.
The game's Versus Mode accommodates play for up to four players.
Route Guide with stage names
3A_|Tulip Garden 4A_ Cloudy Highland 3A_ | Castle Wall 3B [Metropolis A [Deep Lake 4B] Industrial Complex TA__]Palm Beach 3B Coniferous Forest ‘C/Ancient Ruins 2B_ | Alpine 4C__ [Snow Mountain 3C_ [Desert 3D_ [Imperial Avenue 4D ]Ghost Forest 3E_ [Cape Way
GAME FLOW
- Versus Mode Entry
After inserting coins and pressing the Start Button, Versus Mode Entry prompts will be displayed for potential players at other game cabinets. Pressing the Start Button within the Versus Mode Entry period will start Versus Mode.
Closing Versus Mode Entry
To close Versus Mode entry, press the View Change Button and the Brake pedal at the same time before other players join. (Press the Brake pedal while holding down the View Change Button.)
Versus Mode entry time can also be run down to "0" by holding the Start Button, thus closing Versus Mode entry.
By closing Versus Mode entry in either of the above ways, the Single Player mode will commence, provided no players have already joined.
- Car Selection
~— i 4 INTERMEDIATE, Playep
You can select the car model. In Single Player mode you can also change the car color. Press the Brake pedal and Shifter together to change the car color. (Press up or down on the shifter while holding down the Brake pedal.) These instructions will not be displayed on the screen.
Moving the Shifter up or down while holding down the Brake pedal will bring up a two-character car color code just above the 'Gas Pedal: Enter Selection’ indicator in the lower right corner of the screen. The color codes are represented as follows: RE:red, YE:yellow, BK:black, WH:white, SL:silver, GR: green, LB:light blue, BU:blue.
Changing the car model in the middle of color selection will automatically return the color to the selected model's default color, after which model and color selection will again be possible. The selected car will then be displayed in the chosen color at the start of the game.
The available colors vary from car to car. The colors available for each car are indicated by a 'Yes' in the chart below, and likewise, only these colors will be shown during selection.
Color Chart
| Carte | Black | Bie | Green | [ight Bine | Red | Site | [Wie | Yellow | ||
| F50 | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | |
| 360 Spider | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | |
| Dino 246 GTS | Yes | No | No | Yes | Yes | Yes | Yes | Yes | |
| 365 GTS/4 Daytona | Yes | No | No | Yes | Yes | Yes | Yes | Yes | |
| Testarossa | Yes | No | No | No | Yes | Yes | No. | Yes | |
| |__288 GTO | Yes | No | No | Yes | Yes | No | Ye: | Yes | |
| Enzo | Ferrari | Yes | No | No | No | Yes | Yes | No. | Yes |
| F40 | ‘Yes. | Yes | Yes | ‘Yes | ‘Yes. | ‘Yes | ‘Yes. | Yes |
Player-selectable cars and their characteristics are shown below. The color shown in parenthesis is the default color.
+ F50 (RE), 360 Spider (RE) (For INTERMEDIATE Player) Acceleration hereee Handling obs doa Top Speed obs do
~ Dino 246 GTS (YE), 365 GTS/4 Daytona (BK) (For NOVICE Player) Acceleration pee Handling PRIORI Top Speed DRE
~ Testarossa (RE), 288 GTO (RE) (For INTERMEDIATE Player) Acceleration OR A A A A OK Handling IIR Top Speed EI IC
~ Enzo Ferrari (RE), F40 (RE) (For PROFESSIONAL Player) Acceleration presi Handling IK Top Speed DERIK
- Transmission Selection
You can choose between Automatic transmission and Manual transmission.
When Manual transmission is selected, the number of gears varies with the car model. <> 6-speed: F50, 360 Spider, Enzo Ferrari ~ 5-speed: Dino 246 GTS, 365 GTS/4 Daytona, Testarossa, 288 GTO, F40
- Mode Selection
In Single Player, you will choose a game mode.
- OutRun Mode Total Time
Shift Up Indicator
Tachometer
Shift Indicator
Speed Meter
This is the pure driving mode, enjoyed with a young lady by your side. You select branching paths and try to reach the goal within the time limit. The game ending varies depending on which goal is reached.
- Heart Attack Mode
Lady's Heart Meter
This is the mode where you raise the Lady's Heart Meter by fulfilling her requests. Collect as many of the hearts showing her feelings as possible. You must pursue her request for the duration of the indicated track section.
~The Lady's Requests
> 'Drift more!" Try drifting continuously throughout the track section.
~ 'Keep passing cars!’ Pass as many cars as possible throughout the track section.
~ 'Don't crash!" Avoid hitting any other cars, walls, or obstacles throughout the track section.
~ 'Run through red/blue!" Drive on the indicated color section of the roadway.
~ 'Hit the blue cones!" There are twenty blue cones placed on the roadway; try to hit as many as you can.
<> 'Cut the line!" Drive through the yellow heart lines between cars on the roadway. Lines cut once will not come back.
~> 'Catch the Heart!" There are Hearts floating around on the roadway. Try your best to drive through the Hearts. Hearts collected once will not come back.
<> Special Requests Satisfying certain conditions will open up Special Requests.
<> Ending The game ending will change depending on your performance assessment.
- Time Attack Mode
Position Sector Time
This mode is a test of time in reaching the goal. Player driving data is recorded for goal time, route best time, and slowest time. The player can then compete against his own time in subsequent plays. When there is no player data recorded, a default data car will appear.
<> Ending The game ending will change depending on your goal time.
<> Internet Ranking Password If your time qualifies, you'll be given an Internet Ranking password. Using this password, you can participate in the Internet Ranking system.
> Goal Choice You can choose from five different destination goal points. (This option is only available in the Time Attack Mode.)
~ Route Choice After choosing a goal, you can decide on a specific route for that particular goal. (This option is only available in the Time Attack Mode.)
There is one exception, however-Goal A, 'Tulip Garden’, and Goal E, 'Cape Way' each have only one route so the Route Choice option will not be available. Goal B, 'Metropolis', and Goal D, 'Imperial Avenue' each have four possible routes, while Goal C, ‘Ancient Ruins' has six possible routes to choose from.
~ BGM Selection
There are seven different in-game songs to select from. In Versus Mode, each player can listen to his or her own individual selection.
~ SPLASH WAVE(from original OutRun) < MAGICAL SOUND SHOWER (from original OutRun) ~ PASSING BREEZE(from original OutRun) + Risky Ride(new) <> Shiny World (new) + Night Flight(new, includes lyrics) + Life was bore(new, includes lyrics)
VERSUS PLAY
- Versus Mode Game Play
The car colors for versus mode are fixed for each player. IP: Red, 2P: Yellow, 3P: White/Silver (depending on car model), 4P: Black
The position order on the starting grid is determined by the order of Versus Mode entry (decided by who presses the Start Button first).
The course is decided as the route taken by whoever first reaches a given course branch.
- Special Versus Mode Commands
The 'No Handicap" and 'Player Only' modes are selectable with special commands entered at the game's selection screen.
- No Handicap Mode
In the usual Versus Mode, the player in second place during a race can catch up easier with computer assistance, but this assistance isn't available in the No Handicap mode.
To activate No Handicap mode, all participants in the Versus Mode competition must press the Brake pedal together with the Shifter up. (Push the shifter up while holding down the Brake pedal.) An icon will be displayed on the right side of the selection screen when this mode is activated.
- Player Only Mode
In Player Only mode, no cars besides the player-controlled cars will appear in the race.
To activate Player Only mode, all participants in the Versus Mode competition must press the Brake pedal together with the Shifter down. (Push the shifter down while holding down the Brake pedal.) An icon will be displayed on the right side of the selection screen when this mode is activated.
ECA Seleck Vis Ti SP
Music 2 Music 3 Music4 Music S Music Music 7
- F Numberof AN Gas Enter Pedal) Selection
GAMEPLAY TECHNIQUES AND SECRET COMMANDS
- How to Drift
After letting go of the Gas pedal, immediately press the Brake pedal. Then, quickly steer sharply into the turn and press the Gas pedal.
In the case of Manual transmission, shift down one gear just before the turn, then immediately steer sharply into the turn.
- Mid-game Quit Command
You can quit in the middle of a game. This command is only possible in the Single Player mode.
To activate the mid-game quit command, stop the car and press the Brake pedal, View Change button, and Shifter up. (While holding down the Brake pedal, continue to hold down the View Change button, and finally press the Shifter up.)
After inputting the command, the player is prompted, 'Do you really want to quit this game? Yes/No’. Choosing 'Yes' will finish the game, and 'No' will return the player to the game.
There are three conditions under which this command cannot be executed. «> The player is near the starting grid. <> The remaining time is under 8 seconds. ~ 'No! has already been chosen once.
CHARACTER INTRODUCTIONS
Three major characters appear in the game.
- Driver Name: Alberto Personal Info: Although easy-going on the outside, he's a real go-getter. He has a very distinguished driving sense. He's also quite rich.
- OutRun Mode Lady Name: Jennifer Personal Info: She's a filthy rich 'princess', always selfishly seeking the next thrill. She's involved with Alberto, his Ferrari a present from her. She has a sharp eye for driving techniques.
- Heart Attack Lady Name: Clarissa Personal Info: She's peppy and unmistakably sexy. A driving fan, with a weakness for thrill rides. She's very demanding, but her sweet character makes her hard to dislike.
- EXPLANATION OF TEST AND DATA DISPLAY
By operating the switch unit, periodically perform the tests and data check. When installing the machine initially or collecting cash, or when the machine does not function correctly, perform checking in accordance with the explanations given in this section. The following shows tests and modes that should be utilized as applicable. This product's basic system consists of the Chihiro game board and the GD-ROM drive. The system enables you to play several games one after the other just by changing a GD-ROM disc that is to be set on the GD-ROM drive. The product supports, therefore, the following 2 test modes:
- System test mode for an automatic self-diagnostic test (generally used by every product that contains the basic system) and a coin assignment (specifically used by this product) and
- Game test mode for testing the input/output control devices and setting the difficulty level (specifically used by this product).
TABLE 9 EXPLANATION OF TEST MODE
ITEMS DESCRIPTION
INSTALLATION When the machine is installed, perform the following: OF MACHINE 1. Check to ensure each is the standard setting at shipment.
- Check each Input equipment in the INPUT TEST mode.
- Check each Output equipment in the OUTPUT TEST mode.
- Test on-IC-Board IC's in the self-test mode.
MEMORY TEST This test is automatically executed by selecting MEDIA BOARD TEST or SYSTEM INFORMATION in the Menu mode.
Periodical! ii form-the felt PERIODIC 1. MEMORY TEST SERVICING 2. Ascertain each setting.
- To test each Input equipment in the INPUT TEST mode.
- To test each Output equipment in the OUTPUT TEST mode.
+ CONTROL 2. Adjust or replace each Input equipment. SYSTEM 3. If the problem still remains unsolved, check each equipment's mechanism movements.
MONITOR In the Monitor Adjustment mode, check to see if Monitor (Projector) adjustments are appropriate.
IC BOARD MEMORY TEST
DATA CHECK Check such data as game play time and histogram to adjust the difficulty level, etc.
9-1 SWITCH UNIT AND COIN METER
uN Never touch places other than those specified. Touching places not specified can cause electric shock and short circuit accidents.
WARNING!
(0?) @ Adjust the sound to the optimum volume, taking into consideration the environmental requirements of the installation location.
SWITCH UNIT
Open the coin chute door, and the switch unit shown will appear. ° The functioning of each SW is as follows:
D ®@ @© @®
FIG. 9. 1 a SWITCH UNIT
(1)SOUND VOLUME: Adjusts sound volume for all of the machines! Speakers. (SPEAKER)
- TEST BUTTON: For the handling of the test button, refer to the following pages. (TEST)
- SERVICE BUTTON: Gives credits without registering on the coin meter. (SERVICE)
- DEMAGNETIZER SWITCH: Eliminates the on-screen color unevenness due to magnetization of (DEMAG.) CRT. First use this SW before performing the monitor's color adjustment.
COIN METER
Open the Cashbox Door by using the key to have the Coin Meter appear COIN METER underneath the Cashbox. ~
FIG. 9. 1b
9-2 SYSTEM TEST MODE
(10?) Any settings that are changed by users during TEST MODE are saved upon exiting TEST MODE with the EXIT command in the SYSTEM MENU. If the unit is
A. SYSTEM TEST MENU MODE
System Test Mode can be used to check that the main circuit operations are correct, adjust Monitor color, and perform coin/credit settings. However, this product can only be used with the settings shown below.
+ SOUND TEST
- OUTPUT TYPE: STEREO + COIN ASSIGNMENTS
- COIN CHUTE TYPE: COMMON
- SERVICE TYPE: COMMON
@ Press the TEST Button after powering on the unit to display the following SYSTEM MENU.
SYSTEM MENU
MEDIA BOARD TEST SYSTEM INFORMATION Jvs TEST SOUND TEST C.R.T. TEST COIN ASSIGNMENTS CLOCK SETTING NETWORK SETTINGCCORE) NETWORK SETTINGCMEDIA) ENTER GAME TEST [ete icciniiociiocii]
- EXIT
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
@ Press the SERVICE Button to move the cursor to the desired test item.
@ Move the cursor to the desired item and press the TEST Button to display each test screen.
@ Move the cursor to ENTER GAME TEST and press the TEST Button to enter the individual test menus for each game. Refer to "9-3 GAME TEST MODE".
@ When testing is complete, move the cursor to EXIT and press the TEST Button. The game advertisement screen should be displayed.
B. MEDIA BOARD TEST
(0?) Powering off the system during the MEDIA BOARD TEST with a DIMM BOARD will
erase the game programme data. It may be necessary to reload the data.
MEDIA BOARD TEST is used to check the memory and IC on the MEDIA BOARD connected to the Chihiro. Test screens and test times may differ depending on the type of MEDIA BOARD connected to the unit.
- The following is the MEDIA BOARD TEST screen for a unit with a DIMM BOARD.
MEDIA BOARD TEST 1/2
DIMM BOARDCTYPE3) VERSION **** STATUS GOOD CHECKING 100%
DIMM TEST DIMM@ GOOD DIMM1 NONE GD-ROM GOOD
PRESS TEST BUTTON TO EXIT
@ MEDIA BOARD TEST begins immediately upon entering this test mode.
@ If"GOOD" is displayed to the right of each item, the MEDIA BOARD components are functioning properly.
@ Press the TEST Button to display the following screen.
MEDIA BOARD TEST 2/2
NETWORK BOARD VERSION **** STATUS GOOD CHECKING 100%
NETWORK BOARD TEST RAM CHECK-GOOD --COMPLETED--
PRESS TEST BUTTON TO EXIT
@ After the test is complete, move the cursor to EXIT and press the TEST Button to return to the SYSTEM MENU screen.
C. SYSTEM INFORMATION
Use SYSTEM INFORMATION to check version and other information for system programmes. Screens may differ depending on the type of MEDIA BOARD connected to the unit.
SYSTEM INFORMATION
MAIN BOARD
| REGION | sees | CAD |
| BOOT VERSION | weet | cB) |
| QC FIRM VERSION | **** | cB) |
| SC FIRM VERSION | **** | cB) |
SERIAL NO. **#*** #8 ke RRR [<@)
MEDIA BOARD DIMM BOARDCTYPE3) + GDROM rap)
| MEMORY SIZE | 512MB | CED |
| FIRM VERSION | weet | CFD |
SERIAL NO. ***** #8 RRR RK CG) NETWORK BOARD
| FIRM VERSION | wee | cHD |
PRESS TEST BUTTON TO EXIT
Press the TEST Button to return to the SYSTEM MENU screen.
(A)
(B)
(©)
(D)
(E)
(F) REGION The COUNTRY CODE of the MAIN BOARD.
BOOT VERSION, QC FIRM VERSION, SC FIRM VERSION Version information for the MAIN BOARD system programmes.
SERIAL NO. Serial number of the MAIN BOARD.
DIMM BOARD + GDROM Type of MEDIA BOARD. This example shows a DIMM BOARD with a GD-ROM DRIVE connected.
MEMORY SIZE Capacity of DIMM memory installed on the DIMM BOARD.
FIRM VERSION Version information for the DIMM BOARD system programme.
SERIAL NO. Serial number of the DIMM BOARD.
FIRM VERSION Version information for the NETWORK BOARD system programme.
D. SVS TEST
JVS TEST is used to verify the specs of the I/O BOARD connected to the Chihiro and to run input tests. I/O BOARD specs are displayed initially. Screens may differ depending on the type of I/O BOARD connected to the unit.
NODE NAME
CMD VER JVS VER COM VER SWITCH COIN ANALOG ROTARY KEYCODE SCREEN CARD
BACKUP JVS TEST INPUT TEST NEXT NODE
- EXIT oer
SOE EEE
1/0 BD JVS Verte SORE
@ @ PLAYERCS) 13 BITS SLOT CH CH
7@ Y:0 CH:0 SLOT ©@xXOSSMNNENK HOPPER OUT @ CH DRIVER OUT 6 CH ANALOG OUT @ CH CHARACTER CHARA:@ LINE:@ @ SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
@ Use the SERVICE Button to move the cursor to the desired test item.
@ Move the cursor to INPUT TEST and press the TEST Button to enter the INPUT TEST screen for the I/O
BOARD currently displayed.
@ When 2 or more I/O BOARDS are connected, move the cursor to NEXT NODE and press the TEST Button to enter the test screen for the next I/O BOARD. The lower the NODE number, the further away the node is from the Chihiro.
@ Move the cursor to EXIT and press the TEST Button to return to the SYSTEM MENU screen.
4l
INPUT TEST Screen
Jvs TEST INPUT TEST
NODE wv
| SYSTEM | a | CAD |
| PLAYER 1 | 000 | A) |
| PLAYER 2 | 000 | CA) |
| COIN 1 | 2000 | cB) |
| COIN 2 | 2000 | 14:3) |
| ANALOG 1 | 0000 | (<9) |
| ANALOG 2 | 0000 | (<9) |
| ANALOG 3 | 0000 | (<o) |
| ANALOG 4 | 000 | (<o) |
| ANALOG 5 | 0000 | (<o) |
| ANALOG 6 | 0000 | (<9) |
| ANALOG 7 | 0000 | (<9) |
| ANALOG 8 | 0000 | (<9) |
PRESS TEST AND SERVICE BUTTON TO EXIT
@ On-screen values change according to the input from switches and the volume.
(A) SYSTEM, PLAYER Values change with input from control panel/other switches.
(B) COIN Increases with input from the COIN SWITCH. The count is cleared when exiting TEST MODE.
(C) ANALOG Displays analog values from "0000" to "FFFF".
@ Press the SERVICE and TEST Buttons simultaneously to return to the JVS TEST main screen.
E. SOUND TEST
Use SOUND TEST to test sound output and to select the stereo/mono/surround setting.
SOUND TEST
| OUTPUT TYPE | STEREO | CAD | |
| RIGHT SPEAKER | OFF | cB) | |
| LEFT | SPEAKER | OFF | cB) |
- EXIT
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
@ Use the SERVICE Button to move the cursor to the desired test item.
@ Press the TEST Button to enter the selected item.
(A) OUTPUT TYPE(STEREO, MONO, SURROUND) Select the sound output from the I/O PANEL audio output interface setting among STEREO, MONO and SURROUND.
(B) RIGHT/LEFT SPEAKER(ON, OFF) When set to "ON", the test sends a beep to each audio output interface. Only the word "SPEAKER" is displayed when the OUTPUT TYPE is set to "MONO", and when set to "ON", the test sends the same beep to both the left/right audio output interfaces. To test surround output, it is necessary to use a separate Audio Amp, and receive signal from a terminal not in use at the time of shipping.
@ Move the cursor to EXIT and press the TEST Button to return to the SYSTEM MENU screen.
F. C.R.T. TEST
Use the C.R.T. TEST to adjust monitor colours and verify screen size.
COLOUR CHECK Screen
@ Monitor COLOUR CHECK screen is displayed initially. Each of the colours (red, green and blue) is darkest at the far left and gets progressively lighter (32 steps) towards the right. Monitor brightness is set correctly if the white colour bar is black at the left edge and white at the right edge.
C.R.T. TEST 1/2
RED
GREEN
BLUE
WHITE
PRESS TEST BUTTON TO CONTINUE
@ Press the TEST Button to proceed to the next page.
SIZE CHECK Screen
C.R.T. TEST 2/2
PRESS TEST BUTTON TO EXIT
@ Adjust the CHECK GRID so that the entire GRID is displayed on the screen.
@ Press the TEST Button to return to the SYSTEM MENU screen.
G. COIN ASSIGNMENTS
Use COIN ASSIGNMENTS to set the credit rate for each coin inserted.
@ Use the SERVICE Button to move the cursor to the desired test item.
@ Press the TEST Button to change the setting or to open the detailed settings.
@ Move the cursor to EXIT and press the TEST Button to return to the SYSTEM MENU screen.
COIN ASSIGNMENTS COIN ASSIGNMENTS
| COIN CHUTE TYPE | COMMON | CAD | COIN CHUTE TYPE | INDIVIDUAL |
| SERVICE TYPE | COMMON | (BD | SERVICE TYPE | INDIVIDUAL |
| COIN CHUTE #1 COIN TO CREDIT RATE | (<a) | COIN CHUTE #1 COIN TO CREDIT RATE |
1 COINCS) COUNT AS 1 CREDITCS) 1 COINCS) COUNT AS 1 CREDITCS) COIN CHUTE #2 COIN TO CREDIT RATE (co) 1 COINCS) COUNT AS 1 CREDITCS)
| DETAIL SETTING | a>) | DETAIL SETTING |
| GAME COST SETTING | cH) | GAME COST SETTING |
EXIT — EXIT
SELECT WITH SERVICE BUTTON SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON AND PRESS TEST BUTTON
COIN CHUTE TYPE...COMMON, COIN CHUTE TYPE...INDIVIDUAL
(A)
(B) COIN CHUTE TYPE(COMMON, INDIVIDUAL) Adjust settings according to the specs of the cabinet COIN CHUTE.
COMMON This is for cabinets where a single COIN CHUTE is used by multiple players. Coins inserted by each player are treated as common credits. Up to 2 COIN CHUTES (#1 and #2) may be used. The (C) COIN TO CREDIT RATE setting for COIN CHUTE #1 and #2 may be set differently.
INDIVIDUAL This is for cabinets with individual COIN CHUTES for each player. Coins inserted by each player are treated as individual player credits. The (C) COIN TO CREDIT RATE setting is used by all COIN CHUTES.
SERVICE TYPE(COMMON, INDIVIDUAL) Use this to set the function of each SERVICE Button when there is more than one SERVICE Button.
COMMON Pressing any SERVICE Button enters service credits for all players.
INDIVIDUAL Pressing the SERVICE Button enters service credits only for the corresponding player.
(C) COIN TO CREDIT RATE Set the CREDIT RATE for each coin inserted. The "X COIN(S) COUNT AS Y CREDIT(S)" setting indicates that "Inserting X coins equals Y credits". Set this to "FREE PLAY" to allow game play without credits. When (A) COIN CHUTE TYPE is set to "COMMON", COIN CHUTE #2 settings are restricted to some extent by the settings for COIN CHUTE #1.
(D) DETAIL SETTING This mode allows for more detailed credit rate settings than the (C) COIN TO CREDIT RATE setting. Changes made in DETAIL SETTING override any (C) COIN TO CREDIT RATE settings.
DETAIL SETTING Screen
COIN ASSIGNMENTS COIN ASSIGNMENTS DETAIL SETTING DETAIL SETTING
| COIN CHUTE #1 MULTIPLIER | CE) | COIN CHUTE #1 MULTIPLIER |
1 COIN COUNT AS 1 COINCS) 1 COIN COUNT AS 1 COINCS) COIN CHUTE #2 MULTIPLIER CE) 1 COIN COUNT AS 1 COINCS)
| BONUS ADDER | NO BONUS ADDER | CFD | BONUS ADDER | NO BONUS ADDER |
| COIN TO CREDIT | 1 COINCS) 1 CREDIT | CG) | COIN TO CREDIT | 1 COINCS) 1 CREDIT |
- EXIT — EXIT COIN CHUTE #1 OPERATION COIN CHUTE #1 OPERATION
| COIN | 123 | 45 | 67 | 8 | 9 | COIN | 123 | 45 | 6 | 7 | 8 | 9 | ||
| CREDIT1 | 23 | 4 | 5 | 6 | 7 | 8 | 9 | CREDIT 1 | 23 | 45 | 6 | 7 | 8 | 9 |
COIN CHUTE #2 OPERATION
| COIN | 123 | 45 | 67 | 8 | 9 | ||
| CREDIT1 | 23 | 4 | 5 | 6 | 7 | 8 | 9 |
SELECT WITH SERVICE BUTTON SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON AND PRESS TEST BUTTON
COIN CHUTE TYPE...COMMON COIN CHUTE TYPE...INDIVIDUAL
(E) COIN CHUTE MULTIPLIER Use this to set how many coins will be counted for each coin inserted. The "1 COIN COUNT AS X COIN(S)" setting indicates that "Each coin will be counted as X coins". When the (A) COIN CHUTE TYPE is set to "COMMON", the setting may be set individually for COIN CHUTE #1 and #2.
(F) BONUS ADDER Use this to set the number of coins calculated with the (E) COIN CHUTE MULTIPLIER setting that need to be inserted to get 1 bonus coin. When the (A) COIN CHUTE TYPE is set to "COMMON", the sum of the coins for COIN CHUTE #1 and #2 is used for the calculation. The "X COINS GIVE | EXTRA COIN" setting indicates that "For every X coins, | bonus coin is given". Set this to "NO BONUS ADDER" to disable bonus coins entirely.
(G) COIN TO CREDIT Use this to set how many coins calculated with the (F) BONUS ADDER setting count as | credit. The "X COIN(S) | CREDIT" setting indicates that "Every X coins equals | credit."
(H) GAME COST SETTING Use this mode to set the number of credits required to start a game. Screens may differ depending on the game.
COIN ASSIGNMENTS GAME COST SETTING
1 CREDITCS) TO START [e9)
- EXIT
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
- Set the number of credits required to start a game.
H. CLOCK SETTING
Use CLOCK SETTING to set the Chihiro internal clock.
CLOCK SETTING
2OXX/XX/XXCXXX) XX: XX: XX
YEAR MONTH DAY HOUR, MINUTE
- EXIT
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
@ Use the SERVICE Button to move the cursor to the item to be set.
@ Move the cursor to the desired item and press the TEST Button to increase values.
The max value for YEAR is "2099"; further increases return the value to "2000".
@ Move the cursor to EXIT and press the TEST Button to return to the SYSTEM MENU screen.
I. NETWORK SETTING (CORE)
Use the LAN PORT attached to the Main Board, and carry out the settings necessary for network communication.
NETWORK SETTING CCORE)
->REMOTECC) ENABLE ca IP ADDRESSCC) pad SUBNET MASKCC) es GATE WAY) oo) PRIMARY DNSCC) ceD exIT
CURRENT #**seeneeeee cr) AK ee oe doce SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
@ Use the SERVICE Button to move the cursor to the desired test item.
(A)
()
(©)
()
(E)
(F) (When setting IP ADDRESS, SUBNET MASK, GAME WAY or PRIMARY DNS, use the underline as a guide.)
Press the TEST Button to change the setting.
Move the cursor to EXIT and press the TEST Button to return to the SYSTEM MENU screen. REMOTE (C) This sets up whether a communication setting is automatic or manual. ENABLE: Sets the communication setting automatically. DISABLLE: — Sets the communication setting manually. IP ADDRESS (C) This is one of the settings required for communication network. After setting the number, press TEST Button on SET position to memorize the setting. If you set the REMOTE setting to ENABLE, you cannot select this.
SUBNET MASK (C) This is one of the settings required for communication network. After setting the number, press TEST Button on SET position to memorize the setting. If you set the REMOTE setting to ENABLE, you cannot select this.
GATE WAY (C) This is one of the settings required for communication network. After setting the number, press TEST Button on SET position to memorize the setting. If you set the REMOTE setting to ENABLE, you cannot select this.
PRIMARY DNS (C) This is one of the settings required for communication network. After setting the number, press TEST Button on SET position to memorize the setting. If you set the REMOTE setting to ENABLE, you cannot select this.
CURRENT This displays the present setting value during a setup of each item [(B), (C), (D), (E)]. Pressing TEST Button on SET position, the settings are memorized and the screen is changed.
J. NETWORK SETTING (MEDIA)
(10?) This product should only be used with the factory settings indicated in this manual. Selecting certain options from the screens listed below may alter settings or bring up
Use NETWORK SETTING to establish and test network connections.
@ Use the SERVICE Button to move the cursor to the desired test item.
@ Press the TEST Button to change the setting or to open the detailed settings.
@ Move the cursor to EXIT and press the TEST Button to return to the SYSTEM MENU screen.
NETWORK SETTING (MEDIA)
NETWORK TYPE ETHER CA)
SET IP ADDRESS cB)
CLEAR NETWORK SETTING
NETWORK TEST
->EXIT
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
(A) NETWORK TYPE Choose a type of the communication network. Set to ETHER in this game machine.
NONE: Sets that the communication system does not perform. Sets to NONE when you don't set the network system.
ETHER: Sets ETHER for the communication network.
MOBILE: Sets a mobile communication terminal for the communication network.
ETHER-MOBILE DEFAULT ETHER: Set ETHER or MOBILE automatically for the communication network. Priority is given to ETHER.
ETHER-MOBILE DEFAULT MOBILE: — Set ETHER or MOBILE automatically for the communication network. Priority is given to MOBILE.
(B) SETIPADDRESS This sets up the details of the communication network. Depending on the NETWORK TYPE setting, the contents of setting vary. If setting to NONE, it does not appear.
@ETHER Setting
SET IP ADDRESS 1/1
REMOTE DISABLE (co) IP ADDRESSCE) ree SUBNET MASKCE)
->EXIT
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
(C) REMOTE This option determines whether network settings will be handled automatically. For this machine, the option should be set to DISABLE.
The other items are set up automatically. It's not necessary to change anything.
9-3 GAME TEST MODE
(10?) When changing the game configuration, changes will not be enabled until the ENTER Game Test has been completed. Be sure to exit the Game Test Mode properly after
Select ENTER GAME TEST from the System Menu screen to display the Game Test Menu screen as follows. Use the SERVICE Button to move the cursor to the desired test item. Press the TEST Button to enter the selected item.
GAME TEST MODE
INPUT TEST OUTPUT TEST DRIVE BOARD TEST GAME ASSIGNMENTS BOOKKEEPING BACKUP DATA CLEAR --> EXIT
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
FIG. 9. 3 GAME TEST Menu screen
After selecting an item, read the explanations below regarding operation.
After the test is complete, move the cursor to EXIT and press the TEST Button to return to the System Menu screen.
A. INPUT TEST
Select INPUT TEST to display the following screen and check the status of input devices. This test should be used periodically to check that each input device is functioning correctly.
INPUT TEST
STEERING **H GAS FH BRAKE FH GEAR POSITION N START OFF VIEW CHANGE OFF SERVICE OFF TEST OFF
PRESS TEST AND SERVICE BUTTON TO EXIT
FIG. 9. 3a INPUT TEST screen
Test the STEERING, GAS (ACCEL) and BRAKE controls to ensure that they are functioning properly and that the parameters change smoothly as each input device is operated.
Display N, UP and DOWN using the GEAR POSITION. N displays that there is no control input. Verify that both UP and DOWN display in sync with the position of the shift knob.
Press the START, VIEW CHANGE, SERVICE and TEST Buttons. If functioning correctly, each indicator will switch from OFF to ON.
STEER ING GEAR POSITION
I Wal Gi D SK BS |,
START VIEW CHANGE
Press the SERVICE and TEST Buttons simultaneously to return to the Game Test Menu screen.
B. OUTPUT TEST
Select OUTPUT TEST to display the following screen and check the status of each lamp. This test should be used periodically to check that the lamps are functioning correctly.
On this screen the cursor will switch automatically between items, lighting up the respective lamps.
OUTPUT TEST
START BUTTON --> VIEW CHANGE BUTTON
PRESS TEST BUTTON TO EXIT
FIG. 9. 3 b OUTPUT TEST screen
@ START BUTTON: Lights up the START button.
@ VIEW CHANGE BUTTON: Lights up the View Change button.
Press the TEST Button to return to the Game Test Menu screen.
C. DRIVE BOARD TEST
Select DRIVE BOARD TEST to display the following screen and check the status of steering motor.
Use the SERVICE Button to select the desired test item. Press the TEST Button to activate the selected item.
-->
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON DRIVE BOARD TEST
STOP MOTOR ROLL RIGHT ROLL LEFT CENTER OF STEER 128 :RIGHT LEFT MOTOR POWER 80% EXIT
FIG. 9. 3 c DRIVE BOARD TEST screen
@ STOP MOTOR: Halts motor activity.
@ ROLL RIGHT: Rotates steering wheel completely to the right.
@ ROLL LEFT: Rotates steering wheel completely to the left.
@ CENTER OF STEER: Steering wheel motor's center of control is displayed. (Default setting: 128) *RIGHT: — Moves center of control position to the right. *LEFT: Moves center of control position to the left.
@ MOTOR POWER: Sets the steering resistance. There are four levels to choose from, 100% (strong resistance), 90%, 80%, and 60%(weak resistance). (Default setting: 80%)
After changing the settings, select EXIT and press the TEST Button to return to the Game Test Menu screen.
D. GAME ASSIGNMENTS
Select GAME ASSIGNMENTS to display the current game settings and make changes.
Changes to settings are not enabled until Test Mode is exited. After changing settings, be sure to exit Test Mode.
DIFFICULTY NORMAL CABINET STANDARD ADVERTISE SOUND ON LANGUAGE ENGLISH SPEEDOMETER KILO QUICK START OFF LINK_ID 1 TOTAL MACHINE 1 GROUP 1
--> EXIT GAME ASSIGNMENTS
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
FIG. 9. 3 d GAME ASSIGNMENTS screen
Perform the following settings for each item.
@ DIFFICULTY:
@ CABINET:
@ ADVERTISE SOUND:
@ LANGUAGE:
@ SPEEDOMETER:
@ QUICK START: The game difficulty setting. There are 5 difficulty levels with VERY EASY being the easiest setting and VERY HARD being the most difficult setting. (Default Setting: NORMAL)
The game cabinet type setting. Choose from either STANDARD or UPRIGHT.
The setting to turn the advertising sound ON/OFF. (Default Setting: ON)
The game language setting. Choose from either JAPANESE or ENGLISH. (Default Setting: ENGLISH)
The speed display setting. During game play, KILO will be displayed as "km/h", and MILE as "mph". Choose one of these options. (Default Setting: KILO)
Choose OFF or ON. The ON setting takes the player directly to the game selection screen after entering credits into the machine. (Default Setting: OFF)
Perform the following settings for each item.
@ DIFFICULTY:
@ CABINET: @ ADVERTISE SOUND:
@ LANGUAGE:
@ SPEEDOMETER:
@ QUICK START:
@ LINK_ID:
@ TOTAL MACHINE:
@ GROUP: The game difficulty setting. There are 5 difficulty levels with VERY EASY being the easiest setting and VERY HARD being the most difficult setting. (Default Setting: NORMAL) The game cabinet type setting. Choose from either STANDARD or UPRIGHT. The setting to turn the advertising sound ON/OFF. (Default Setting: ON) The game language setting. Choose from either JAPANESE or ENGLISH. (Default Setting: ENGLISH) The speed display setting. During game play, KILO will be displayed as "km/h", and MILE as "mph". Choose one of these options. (Default Setting: KILO) Choose OFF or ON. The ON setting takes the player directly to the game selection screen after entering credits into the machine. (Default Setting: OFF) The setting which determines the Player Number of each cabinet. It assigns unique numbers for cabinets in a single group. Do not assign two or more cabinets the same number. For network play, it is necessary to complete the LINK_ID, TOTAL MACHINE, and GROUP settings for each cabinet. (Default Setting: 1, Maximum: 4) The number of network connected game cabinets. (Sets the number of competing cabinets in Versus Mode.) Setting this to "1" limits possible play modes to Single Player mode only. (Default Setting: 1, Maximum: 4) Used for dividing networked cabinets into groups. For example, to split up a group of four networked machines into two groups of two cabinets, set two cabinets to "1" and the other two cabinets to "2". Generally, setting all cabinets to "1" is recommended. After changing the settings, select EXIT and press the TEST Button to return to the Game Test Menu screen. <Network Versus Mode Cabinet Settings> Cases for four cabinets (A, B, C, and D) connected via network cable. 4-Cabinet Versus
| CABINET. | A | B | Cc | D |
| | LINK ID | 1 | 2. | 3 | 4 |
| TOTAL MACHINE | 4 | 4 | 4 | 4 |
| GROUP | 1 | 1 | 1 | 1 |
Status Four cabinets can compete.
3-Cabinet Versus
CABINET A B C D
| LINK ID | 1 | 1 | 2 | 3 |
| |_ TOTAL MACHINE | 1 | 3 | 3 | 3 |
| GROUP | it | 2 | 2 | 2 |
Status Single play only. Three cabinets can compete.
2-Cabinet Versus
| CABINET. | A | B | Cc | D |
| | LINK ID | 1 | 2 | 1 | 2 |
| TOTAL MACHINE | 2 | 2 | 2 | 2 |
| GROUP | 1 | 1 | 2 | 2 |
Status Two cabinets can compete. Two cabinets can compete.
E. BOOKKEEPING
Selecting BOOKKEEPING will display the following screen. All up-to-date operation data will be displayed on two BOOKKEEPING screens. Use the TEST Button to cycle between the first screen (BOOKKEEPING 1/2) and the second screen (BOOKKEEPING 2/2).
BOOKKEEPING 1/2 [CREDIT INFO] COIN1: COIN2 TOTAL COINS: eo9
COIN CREDITS: SERVICE CREDITS: TOTAL CREDITS: e898
NUMBER OF GAMES 7 @ TOTAL TIME > @'00"00 PLAY TIME > @'00"00 AVERAGE PLAY TIME : 0'00"00
PRESS TEST BUTTON TO CONTINUE SELECT WITH SERVICE BUTTON
FIG. 9. 3 ea BOOKKEEPING 1/2 screen
@COINI: The number of coins inserted into Coin Slot 1.
@ COIN2: The number of coins inserted into Coin Slot 2.
@ TOTAL COINS: The total number of coins inserted into the coin slots.
@ COIN CREDITS: The number of credits for the coins inserted.
@ SERVICE CREDITS: The number of credits input by the SERVICE Button.
@ TOTAL CREDITS: Total credits from coins and the SERVICE Button.
@ NUMBER OF GAMES: The total number of games played.
@ TOTAL TIME: The amount of time the unit has been in operation.
@ PLAY TIME: Total playing time.
@ AVERAGE PLAYTIME: __ Total play time divided by the total number of games played.
Press the TEST Button to move to screen 2/2 of BOOKKEEPING.
BOOKKEEPING 2/2 [GAME MODE INFO]
OUTRUN MODE PLAYERS: @ GOAL PLAYERS: @ GOAL AVE TIME: @'00"00 SELECT AVE TIME: @'Q@0"00
HEART ATTACK MODE PLAYERS: @ GOAL PLAYERS: @ GOAL AVE TIME: @'00"00 SELECT AVE TIME: @'Q@0"00
TIME ATTACK MODE PLAYERS: @ GOAL PLAYERS: @ GOAL AVE TIME: @'00"00 SELECT AVE TIME: @'Q0"00
VS MODE PLAYERS: @ GOAL PLAYERS: @ GOAL AVE TIME: @'00"00 SELECT AVE TIME: @'Q0"00
PRESS TEST BUTTON TO CONTINUE SELECT WITH SERVICE BUTTON
FIG. 9. 3 eb BOOKKEEPING 2/2 screen
This shows the number of plays and the respective play times. This histogram should be referred to when setting the Game Difficulty.
Press the TEST Button to return to the Game Test Menu screen.
F. BACKUP DATA CLEAR
Select BACKUP DATA CLEAR to clear the contents of BOOKKEEPING, ranking data and coin/credit data.
BACKUP DATA CLEAR
YES CCLEAR) --> NO CCANCEL)
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
FIG. 9. 3 f BACKUP DATA CLEAR screen
To clear data, use the SERVICE Button to move the cursor to YES (CLEAR) and then press the TEST Button. When the data has been cleared, the message "COMPLETED" will be displayed.
Press the TEST Button again to return to the Game Test Menu screen.
Move the cursor to NO (CANCEL) and press the TEST Button to return to the Game Test Menu screen without clearing the data.
- HANDLE MECHANISM
In order to prevent an electric shock and short circuit, be sure to turn power off before perform ing work by touching the interior parts of the product.
In the test mode, if the steering wheel’s VR variations are not within the allowable range, the VR installation position adjustments or VR replacement is needed. Also, be sure to apply grease to the VR gear portion once every 3 months.
11 - 1 REMOVING THE CONTROL PANEL
Turn the power switch off. Remove a total of 4 tamperproof screws from both sides of the control panel’s front. @ Remove the two tamperproof screws fromthe underside of the control panel. Wiring connectors are connected inside the control panel. Carefully draw the control panel in a mnner so as not to damage ® wiring. Disconnect the wiring connector.
HEXAGON SOCKET SCREW (total 6), blac! M8x 30, flat & spring washers used
11 - 2 REPLACING AND ADJUSTING THE HANDLE’S VR
Never touch places other than those specified. Touching places not specified can cause electric shock and/or short circuit.
REPLACING THE VOLUME
® Turn off the power.
- Disconnect the connector. ©) Take out the 2 screws which secure the volume Bracket and remove the Volume Bracket. ® Take out the 2 screws to remove the Volume Gear and replace the Volume. © After replacing the Volume, perform Volume setting in the Volume Setting Mode.
ADJUSTING THE VOLUME
In the Test Mode, have the Volume value indicating screen displayed. Loosen the 2 screws which secure the Volume Bracket to disengage Gear Mesh. With the Steering Wheel in the centering position, cause gears to be engaged in the manner so that the Volume Shaft is in the status shown below.
Fasten screws which secure the Volume Bracket. CICRCICIC) Perform Volume setting as per the Volume Setting Mode.
"D"CUT SIDE VR. 220-5484220-5753 VR BRACKET
SCREW (2) M4x< 8, w/flaandspringwashers
11 - 3 GREASING
tric shock and/or short circuit.
Apply greasing to the Volume gear mesh portion every 3 months. For spray greasing, use Grease Mate (Part No. 090-0066).
V.R. GEAR MESH PORTION
- SHIFT LEVER
In order to prevent electric shock and short circuit, be sure to turn off the power before performing work on the interior parts of the product.
If the Shift Lever operation is not satisfactory, remove the Shift Lever in the following procedure and replace the microswitch.
12 - 1 REMOVING THE SHIFT LEVER
Turn Power off.
Take out the 4 SPECIAL BOLTS and pull the SHIFT LEVER UNIT upward by paying careful attention so as not to damage the wiring. Disconnect the 2 connectors to allow the unit to be removed. ClO RCIC)
When reinstalling, follow the procedure oppisite as when removing. At this time, ensure that*DOWN?” display appears on the upper part as shown.
TAMPERPROOF SCREW (4) M5.X 12, black
12-2 SWITCH REPLACEMENT
Each microswitch is secured with 2 screws. Remove the 2 screws and replace the Microswitch.
TAPPING SCREW (2 M3 X 16
T f GREASING
MICROSWITCH. 509-5704
After replacing the Switch, check to see if the switch is inputted as per Shift Lever operation in the Test Mode.
- ACCEL & BRAKE(S)
In order to prevent an electric shock and short circuit, be sure to turn power off before performing work by touching the interior parts of the product.
If Accel and Brake operation is not satisfactory, adjustment of Volume installation position or Volume replacement is needed. Also, be sure to apply greasing to the gear mesh portion once every three months.
13 - 1 ADJUSTING AND REPLACING THE V.R.
When released: When stepped on: ACCEL: Under 30 H ad Over COH BRAKE: Under 30 H Sad Over COH
Check Volume values in the Test Mode. Since work i: performed inside the energized cabinet, be very careful so as not to touch undesignated portions. Touching places not specified can cause an electric shock or short circuit. TRUSS SCREW. MAX, chrome 2)
® Take out the 2 truss screws and remove the Front Cover from the Accel. & Brake unit. @ Loosen the screw which secures the Potentiobase, and adjust the Volume Value by moving the Base. ® Secure the Potentiobase. @ Perform Volume setting in the Volume Setting Mode.
SCREW MS X 12, FRONT COVER
wiflat washer
POTENTIOBASE.
20-5373 220-5484
Check Volume values in the Test Mode. Since work is performed inside the energized cabinet, be very careful so as not to touch undesignated portions. Touching places not speci- TRUSS SCREW (2) fied can cause an electric shock or short circuit. 4X8 POTENTIOCOVER
Take out the 2 truss screws and remove the Front Cover
from the Accel. & Brake unit.
Loosen the screw which secures the Potentiobase, and
adjust the Volume Value by moving the Base. Secure the Potentiobase. G© © OC Perform Volume setting in the Volume Setting Mode.
POTENTIOBASE.
13-2 GREASING
Once every 3 months, apply greasing to the Spring and Gear Mesh portion.
- COIN SELECTOR
HANDLING THE COIN JAM
If the coin is not rejected when the REJECT button is pressed, open the coin chute door and open the selector gate. After removing the jammed coin, put a normal coin in and check to see that the selector correctly functions.
CLEANING THE COIN SELECTOR
(10?) @ Remove and clean smears by using a soft cloth
dipped in water or diluted chemical detergent
The coin selector should be cleaned once every 3 months. When cleaning, follow the procedure below:
- Turn the power for the machine OFF. Open the coin chute door. (2)Remove the coin selector from the coin chute door.
- Open the gate and dust off by using a soft brush (made of wool, etc.).
- Remove and clean smears by using a soft cloth dipped in water or diluted chemical detergent and then squeezed dry.
- Remove the CRADLE. When removing the retaining ring (E ring), be very careful so as not to bend the rotary shaft.
- Remove stain from the rotary shaft and shaft receiving portions by wiping off with a soft cloth, ete.
- After wiping off as per (6) above, further apply a dry cloth, etc. to cause the coin selector to dry completely. Insert a coin while keeping 5 the Reject Button pressed COIN INSERTION TEST down and check if it is : rejected. Once every month, when performing ie the Coin SW Test, simultaneously check the following: COIN METER
@ Does the Coin Meter count satisfactorily? @ Does the coin drop into the Cashbox correctly? @ Is the coin rejected when inserted while keeping the Reject Button pressed down? FIG. 14
COIN DOOR
Tom Happ. tom, apr baponl Com Happ Controls 106 Garlisch Drive Elk Grove, IL. 60007 Ph, 847-593-6161 ext. 107 Fx. 847-956-2091
Visit our website http://www.happcontrols.com
MECH HOLDER PARTS EXCLUSIVE!
Gisela” Security Hasp availal to protect your lollars, iL 42.0405-00 YELLOW 25¢ (FITTED AS STANDARD) 42-0281-00
42-0517-05,
42-7201-00
42-0119-00 ‘OTHER COMPONENTS UPPERDOOR — 42.321600 LOWERDOOR 42.3145-16 FRAME 42327200 DOORSCREWS 43-0183-00 DOORS FRAME 42.3227.00 42-0232-00
#<— 43.0021-00
42-8174-10
fos REF.
OPTIONAL DOLLAR BILL ACCEPTOR
@ THE COIN DOOR ASSEMBLY USED ON JAMBO SAFARI STD COMES EQUIPPED TO ACCEPT A DOLLAR BILL ACCEPTOR. ALL NEEDED WIR- ING CONNECTIONS ARE CONVIENENTLY LOCATED INSIDE THE GAME FOR THIS APPLICATION.
@ THE COIN DOOR CAN ACCCOMMODATE THE FOLLOWING VALIDA- TORS:
HOLE POSITION#1 Mars 2000 series (FORWARD-MOST POSITION)
HOLE POSITION#2 Mars 2000 series DBV45 (JCM)
HOLE POSITION #3 CURRENTLY NOT USED
HOLE POSITION #4 DSIO01*
*The back flange on the chute can be removed for hold position #4. If the flange is not removed, it may interfere with the back of the cabinent.
The frame and cashbox enclosure on this coindoor has been modified to accomodate a Mars 2000 series upstacker. A 2000 series stacker can be added by simply removing the top two entry door and replacing it with a one entry door with a cut-out for a stacker. This one entry door can be ordered through Coin Controls or one of Coin Controls authorized distributors. The part number is 91-4000-01. The Mars stacker can be obtained through an autherized Mars distibutor.
Security Locking Bar/Bracket Set Part No.# 999-0966
Modified Cash Box (For use when DBA is installed) Part No.# 999-1106
Plastic Cash Box - Full Size Part No.# 999-1177
- MONITOR
15-1 CAUTIONS AND WARNINGS CONCERNING THE SAFETY FOR HANDLING THE MONITORS
Before handling the monitors, be sure to read the following explanations and comply with the
Indicates that access to a specific part of the Indicates the instruction to disconnect a power equipment is forbidden. connector or to unplug.
@ When performing such work as installing and removing the monitor, inserting and disconnecting the external connectors to and from monitor interior and the monitor, be sure to disconnect the power connector (plug) before starting the work. Proceeding the work without following this instruction can cause electric shock or malfunctioning.
Primary side and Secondary side The monitor's circuit which is divided into the Primary side SECONDARY SIDE and Secondary side, is electrically isolated. Do not touch (Chassis, CRT) the primary side, or do not touch both the primary side
dangerous. When making monitor adjustments, use a non- So
conductive driver and make adjustment without touching any part other than the Adjustment V. R. and knob. Also, be sure not to cause a short-circuit to the Primary side and Secondary side. If short-circuited, it can cause electric shock or malfunctioning, which is very dangerous. High-tension Voltage Some of the parts inside monitor are subject to high-tension voltage in excess of 20,000 volts and very dangerous. Therefore, do not touch the monitor interior. Should soldering & paper wastes, etc. be mixed in the monitor interior, turn the power off so as not to cause malfunctioning or fire hazard. Qos CAP PRIMARY SIDE DEMAGNETIZER COIL REAR PART ANODE LEAD MAIN BD ‘Approx. 29 kV
DEMAGNETIZER ‘ ® FOCUS LEAD
COIL (black) Approx. 10 kV
SECONDARY SIDE net FBT Approx.
(Chassis, sheet metal work, CRT, etc.) & Disconnect or unplug 29kV
© Connecting the CRT and PCB For combining the CRT and PCB, use the specified part No. to maintain the status of adjustments made at the factory. The anode of the CRT itself will be accumulatively charged as time elapses, generating high-tension voltage which is very dangerous. The monitor should be used with the Chassis, CRT and PCB assembled. When repair, etc. is required at the time of malfunctioning, be sure to send it in an "as is assembled" condition. If these are disassembled, what's charged to said high tension voltage can be discharged, causing a very hazardous situation. Therefore, under no circumstances should it be disassembled.
@ Static Electricity Touching the CRT surface sometimes causes you to slightly feel electricity. This is because the CRT surfaces are subject to static and will not adversely affect the human body. © Installation and removal ) Ensure that the Magnetizer Coil, FBT (Fly-Back Transformer), Anode Lead and Focus Lead are
For the purpose of static prevention, special coating is applied to the CRT face of this product. To protect the coating, pay attention to the following points. Damaging the
@ Do not apply or rub with a hard item (a rod with pointed edge, pen, etc.) to or on the CRT surfaces.
Avoid applying stickers, seals, etc. on the CRT face. : . Aluminum Foil Do not remove aluminum foils ———————— from the CRT corners. Removing the aluminum foils can cause static prevention effects to be lowered.
15-2 CLEANING THE CRT SURFACES
Static preventive coating is applied to the CRT surfaces. When cleaning, pay attention to the following points. Peeling off of static preventive coat can cause electric shock.
Clean the CRT surfaces once a week. When cleaning, pay attention to the above caution so that the antistatic coating will not come off.
- PERIODIC INSPECTION TABLE
The items listed below require periodic check and maintenance to retain the performance of this machine and to ensure safe business operation. When handling the controller, the player will be in direct contact with it. In order to always allow the player to enjoy the game, be sure to clean it regularly. Also, it is advisable to provide wet tissue, etc. available for player use.
Be sure to check once a year to see if Power Cords are damaged, the plug is securely inserted, dust is accumulated between the Socket Outlet and the Power Plug, etc. Using the product with dust as is accumulated can cause fire and electric shock hazards. Never use a water jet, etc. to clean inside and outside the cabinet. If wetness occurs for any reason, do not use the product until it has completely dried. Periodically once a year, request the place of contact herein stated or the Distributor, etc. where the product was purchased from, as regards the internal cleaning. Using the product with dust as is accumulated in the interior without cleaning can cause a fire or accident. Note that cleaning the interior parts can be performed on a pay-ba-
WARNING!
sis.
TABLE 16
ITEMS DESCRIPTION PERIOD
| CABINET | Check Adjusters'contact with surface. | Daily |
CONTOROL PANEL Cleaning As necessary
Inspection of VR Monthly Inspection of adjusting gear mesh Trimonthly Greasing Trimonthly
| SHIFT LEVER | Inspection of SW | Monthly |
Greasing Trimonthly
| ACCEL. & BRAKE | Inspection of VR | Monthly |
Gear and Spring portion greasing Trimonthly
| MONITOR | SCREEN cleaning. | Weekly |
Check adjustments. Monthly or when moving.
| COIN CHUTE DOOR | Inspection of COIN SW | Monthly |
Coin insertion test Monthly aning of COIN SELECTOR. Trimonthly
| SEAT | Greasing to the seat rail | Trimonthly |
| GAME BD | MEMORY TEST | Monthly |
Check settings. Monthly
| POWER SUPPLY PLUG | Inspection and cleaning | ‘Annually |
INTERIOR Cleaning
| CABINET SURFACES | Cleaning | As necessary |
CLEANING THE CABINET SURFACES
When the cabinet surfaces are badly soiled, remove stains with a soft cloth dipped in water or diluted (with water) chemical detergent and squeezed dry. To avoid damaging surface finish, do not use such solvents as thinner, benzine, etc. other than ethyl alcohol, or abrasives, bleaching agent and chemical dustcloth.
SEAT (Greasing to Seat Rail Portion)
Move the Seat to the rearmost position and apply spray greasing to the portion shown at the right once every 3 months. a.
After greasing, move the Seat a few times forward and backward -,
so as to allow the grease to be applied all over uniformly. Be sure to wipe grease which attaches to the surfaces of the PROTECT RUBBER on the Seat Rail, or any excess grease.
FIG. 16
- ERROR CODES
@ [fan error code is displayed, have a Location's Maintenance Man or Serviceman resolve it. If someone without specialized or technical knowledge attempts to rectify
S
If error No. 20 is generated, the power must be turned OFF and ON again in order to clear it. When requesting replacement or repair of the Game Board or Media Board, put the board in the special purpose packing box specified in this manual for transportation.
Chihiro displays error messages on the screen to indicate various problems. If an error message is displayed, the game cannot be started. In this case, refer to the following section on causes and countermeasures. In the text for this product below, "Media Board" and "DIMM" are one and the same.
Error 02 DISPLAY] Error 02 Main board malfunctioning. CAUSE] MAIN BOARD is inoperative. COUNTERMEASURES] Verify that the MAIN BOARD is connected properly.
Error 03 DISPLAY] Error 03 Bad serial number on main board. CAUSE] Unable to read MAIN BOARD serial ID. COUNTERMEASURES] Disconnect the MEDIA BOARD from the MAIN BOARD and send the MAIN BOARD for repair.
Error 04 DISPLAY] Error 04 Bad serial number on media board. CAUSE] Unable to read MEDIA BOARD serial ID. COUNTERMEASURES] With the MEDIA BOARD still attached to the MAIN BOARD, send the Chihiro for repair.
Error 05 DISPLAY] Error 05 This game is not acceptable by main board. CAUSE] The game is a foreign edition. COUNTERMEASURES] Use the domestic version of the game.
Error 11 [DISPLAY]
[CAUSE]
[COUNTERMEASURES]
Error 12 DISPLAY]
CAUSE] COUNTERMEASURES]
Error 21 DISPLAY]
CAUSE]
COUNTERMEASURES]
Error 22 DISPLAY]
CAUSE] COUNTERMEASURES]
Error 23 [DISPLAY]
[CAUSE] [COUNTERMEASURES]
Error 24 [DISPLAY]
[CAUSE] [COUNTERMEASURES] Error 11 JVS I/O board is not connected to main board.
- I/O BOARD is not connected.
- Unreliable connection between MAIN BOARD and I/O BOARD.
- Connect the I/O BOARD to the MAIN BOARD. Verify that the power cable is connected to I/O BOARD.
- Reconnect or replace the JVS CABLE that connects the I/O BOARD to the MAIN BOARD.
Error 12 JVS I/O board does not fulfill the game spec. Correct I/O BOARD is not connected. Use an I/O BOARD that provides the proper input/output for the game.
Error 21 This game is not acceptable by main board. Game data loaded from the GD-ROM to the DIMM BOARD is corrupted. Verify the GD-ROM DRIVE and Chihiro connection. Check the GD-ROM disc for scratches, dust or dirt.
Error 22 Communication error occurred between main board and media board. No response from DIMM BOARD to MAIN BOARD. Ensure that the DIMM BOARD and the GD INTERFACE BOARD are properly connected. Should the problem persist, the DIMM BOARD or GD INTERFACE BOARD may be damaged.
Error 23 GD-ROM drive cover is open. The GD-ROM DRIVE cover is open. Ensure the GD-ROM DRIVE cover is firmly closed.
Error 24 GD-ROM is not found. GD-ROM disc is not found. Insert the GD-ROM disc correctly. Verify that the disc is a Chihiro GD-ROM disc. Check the GD-ROM disc for scratches, dust or dirt.
Error 25 [DISPLAY]
[CAUSE]
[COUNTERMEASURES]
Error 26 DISPLAY]
CAUSE] COUNTERMEASURES]
Error 27 DISPLAY]
CAUSE]
COUNTERMEASURES]
CAUSE] COUNTERMEASURES]
CAUSE] COUNTERMEASURES] Error 25 Cannot access GD-ROM drive.
- Unable to access GD-ROM DRIVE.
- The GD-ROM DRIVE cover is open.
- Verify that the GD CABLE and the power cable are properly connected to the GD-ROM DRIVE.
- Close the GD-ROM cover securely. Should the problem persist, the GD-ROM DRIVE may be damaged.
Error 26 Media board malfunctioning. KEY CHIP is not found. Attach the proper KEY CHIP for the game. Insert the KEY CHIP securely.
Error 27 DIMM memory is not enough.
- Insufficient DIMM MEMORY on DIMM BOARD.
- DIMM MEMORY is not connected securely.
- Provide a suitable amount of DIMM MEMORY for the software.
- Verify that the DIMM MEMORY is connected securely to the DIMM BOARD.
DISPLAY CAUSE] COUNTERMEASURES]
DISPLAY CAUSE] COUNTERMEASURES]
DISPLAY CAUSE] COUNTERMEASURES]
DISPLAY
CAUSE] COUNTERMEASURES
DISPLAY
CAUSE] COUNTERMEASURES
DISPLAY
CAUSE] COUNTERMEASURES
DISPLAY]
CAUSE] COUNTERMEASURES
[DISPLAY]
[CAUSE] [COUNTERMEASURES] Drive board is not connected to main board. Cannot detect drive board. Check Chihiro and drive board connection (wiring) and drive board power source.
Drive board: Original point error Steering motor initialization failed. If error results even after restarting power, check steering motor wiring. Remove any objects which could obstruct steering wheel movement.
Drive board: Centering error Steering motor initialization failed. If error results even after restarting power, check steering motor wiring. Remove any objects which could obstruct steering wheel movement. Make sure steering volume value is set correctly.
DRIVE BOARD FAULT DETECTED ENCODER ALARM Motor encoder data abnormality. Check that there are no problems with the wiring connecting to motor.
DRIVE BOARD FAULT DETECTED OVERCURRENT ALARM Over-current to motor. Check that there are no problems with the wiring connecting to motor.
DRIVE BOARD FAULT DETECTED OVERHEAT/OVERLOAD ALARM Thermal element activity in motor. Wait for motor to cool.
ERROR OCCURRED CONNECTION TIMEOUT Network check could not finish within 3-minute limit. Make sure network cables are connected correctly. Make sure on Network Check screen that all networked cabinets show
up. In Game Test Mode, make sure TOTAL MACHINE number agrees with number of cabinets. Make sure LINK_IDs within same GROUP are ordered properly, starting from 1. There should be no LINK_ID redundancies within the same GROUP. <See 9-3D>
ERROR OCCURRED REGION IS NOT COHERENT Inconsistent TOTAL MACHINE setting in Game Test Mode. Make sure TOTAL MACHINE number is the same for all networked cabinets. <See 9-3D>
DISPLAY CAUSE] COUNTERMEASURES]
DISPLAY CAUSE] COUNTERMEASURES]
DISPLAY CAUSE] COUNTERMEASURES]
DISPLAY
CAUSE] COUNTERMEASURES
DISPLAY
CAUSE] COUNTERMEASURES
DISPLAY
CAUSE] COUNTERMEASURES
DISPLAY]
CAUSE] COUNTERMEASURES
[DISPLAY]
[CAUSE] [COUNTERMEASURES] Drive board is not connected to main board. Cannot detect drive board. Check Chihiro and drive board connection (wiring) and drive board power source.
Drive board: Original point error Steering motor initialization failed. If error results even after restarting power, check steering motor wiring. Remove any objects which could obstruct steering wheel movement.
Drive board: Centering error Steering motor initialization failed. If error results even after restarting power, check steering motor wiring. Remove any objects which could obstruct steering wheel movement. Make sure steering volume value is set correctly.
DRIVE BOARD FAULT DETECTED ENCODER ALARM Motor encoder data abnormality. Check that there are no problems with the wiring connecting to motor.
DRIVE BOARD FAULT DETECTED OVERCURRENT ALARM Over-current to motor. Check that there are no problems with the wiring connecting to motor.
DRIVE BOARD FAULT DETECTED OVERHEAT/OVERLOAD ALARM Thermal element activity in motor. Wait for motor to cool.
ERROR OCCURRED CONNECTION TIMEOUT Network check could not finish within 3-minute limit. Make sure network cables are connected correctly. Make sure on Network Check screen that all networked cabinets show
up. In Game Test Mode, make sure TOTAL MACHINE number agrees with number of cabinets. Make sure LINK_IDs within same GROUP are ordered properly, starting from 1. There should be no LINK_ID redundancies within the same GROUP. <See 9-3D>
ERROR OCCURRED REGION IS NOT COHERENT Inconsistent TOTAL MACHINE setting in Game Test Mode. Make sure TOTAL MACHINE number is the same for all networked cabinets. <See 9-3D>
DISPLAY]
CAUSE] COUNTERMEASURES
DISPLAY
CAUSE COUNTERMEASURES
DISPLAY
CAUSE COUNTERMEASURES
DISPLAY
CAUSE COUNTERMEASURES
DISPLAY
CAUSE COUNTERMEASURES
DISPLAY]
CAUSE] COUNTERMEASURES]
DISPLAY]
CAUSE] COUNTERMEASURES] ERROR OCCURRED LINK ID ERROR Incorrect LINK_ID assignment. Make sure LINK_ID setting is less than or equal to TOTAL MACHINE number. <See 9-3D>
ERROR OCCURRED VERSION ID IS NOT COHERENT Inconsistent game version among networked cabinets. Make sure GD-ROM version is the same for all networked cabinets.
ERROR OCCURRED GAME ID IS NOT COHERENT Inconsistent GAME ID among networked cabinets. Make sure all networked cabinets are running "OutRun 2".
ERROR OCCURRED REGION CODE IS NOT COHERENT Inconsistent REGION CODE among networked cabinets. Make sure the REGION CODE is the same for all networked cabinets.
ERROR OCCURRED PACKET SIZE ERROR Incorrect PACKET SIZE assignment. Generally, this error should not occur. If error results even after restarting power, try substituting Chihiro or GD-ROM. It may be necessary to contact product retailer.
ERROR OCCURRED GROUP NUMBER ERROR Incorrect GROUP assignment. Generally, this error should not occur. If error results even after restarting power, try substituting Chihiro or GD-ROM. It may be necessary to contact product retailer.
ERROR OCCURRED OVER %d NODES Incorrect TOTAL MACHINE assignment. Generally, this error should not occur. If error results even after restarting power, try substituting Chihiro or GD-ROM. It may be necessary to contact product retailer.
- GAME BOARD
In this product, setting changes are made during the test mode. The Game BD need not be operated. Use the Game BD, etc. as is with the same setting made at the time of shipment so as not to cause electric shock and malfunctioning. Static electricity from your body may damage some electronics devices on the IC board. Before handling the IC board, touch a grounded metallic surface so that the static electricity can be discharged.
18-1 REMOVING THE GD-ROM DRIVE
@ Tur the power off.
@ Remove | truss screw from each side of Base Lid R. @ Unlock the base with the Master Key. @ Turn the Lock Handle on Base Lid R to unlock the lid. @ Lower the seat towards the backrest. Slowly lower the backrest until it touches the floor to prevent damage to the seat part. Put a drop cloth on the floor to prevent damaging the surface of the seat part.
DROP CLOTH TO Unlock. PREVENT DAMAGE
FIG. 18.1
@ Remove the GD cable connector and the power cord connector from the GD-ROM drive.
POWER CORD CONNECTOR
GD CABLE CONNECTOR
PHOTO 18. 1a
(Remove the 3 screws to remove the GD-ROM drive.
M4 x 16, w/flat & spring washers PHOTO 18. 1b
18-2 REMOVING THE GAME BOARD (Chihiro)
@ Follow the above described action.
@ Remove all the connectors from the Chihiro Board.
@ Unplug the AVIP Cable connected to the PHOTO 18.2a
Chihiro Board. Because the AVIP Cable is packed with it when the Chihiro Board is transported, unfasten the cord clamp that fastens the cable and remove it.
AVIP CABLE
Unfasten the cord clamp.
PHOTO 18.2b
18-3 COMPOSITION OF THE GAME BOARD
Board. Gror) Once the Chihiro Board has the Key Chip inserted, it is this product's specialized Game
ASSY CASE BOX ORT EXP(843-0005D-02)
KEY CHIP ASSY CASE BOX DIMM BD ORT f 843-0005B
843-0001A-02
AVIP CABLE 600-7274-150
FIG. 18.3 a
DIP SW SETTING
Use this product with the DIP SW settings shown in the figure below.
PrELr bh: FIG. 18.3b
18-4 REPLACING THE MAIN BOARD BATTERY
@ To prevent overheating, explosion, or fire: + Do not recharge, disassemble, heat, incinerate, or short the battery.
To avoid risk of malfunction and damage: @ Make sure the positive and negative ends are aligned correctly.
If an error appears indicating that the battery power is very low within the first year of use, it is usually an indication of a problem or abnormality with something other than the battery. Be sure to inspect the board that the battery is connected to.
@ There is a Media Board Button Battery underneath the Media Board. BUTTON BATTERY CR2032 401-0054 ow | \, SCREW (4), black Ae —~ M3x65
S TIGHT SCREW (6), black M3x6
MEDIA BOARD
MAIN BOARD HOLDER
FIG. 18.4
@ Carefully remove the battery from its holder.
@ Insert a new battery into the holder with the "+" terminal facing up.
18-5 REPLACING THE MEDIA BOARD BATTERY PACK
Prohibitions and Cautions to Handle the Battery Pack
Be careful when handling the battery pack. We bear no responsibility for problems caused by handling clearly contrary to the content of this manual.
Do not disassemble the battery pack and the batteries. If you should fail to observe this instruction, the internal wires and/or protective
Do not tightly seal the battery pack when installing it onto an external device. Flammable gas is generated from the battery when its safety mechanism has
@ Do not do away with the used battery packs carelessly because they may contaminate the environment. Be sure to dispose of the used battery packs in
@ Remove 4 screws from the upper face of the board.
@ Remove the top cover.
@ Remove | tapping screw and remove the cover battery holder.
@ Disconnect the connector at the end of the wire coming out of the battery pack. Remove by pressing the projection on the connector and pulling.
SCREW (4), black @ Securely connect the new battery pack. / M3X65 @ Attach the cover battery holder and top cover. 4 Pi
Submit the used battery packs to an industrial waste disposal plant. Thus they must be disposed according to the local laws and the regulations in your country.
‘\_TOP COVER
‘ q qe i. TAPPING SCREW (1), black
| S| COVER BATTERY HOLDER _
' 401-0081
CONNECTOR
MEDIA BOARD
FIG. 18.5
18-6 SHIPPING THE GAME BOARD AND CARTON BOX
HOW TO USE THE CHIHIRO BOARD CARTON BOX
Replacement or repair of the Game Board (Chihiro) for this product should be undertaken at the appropriate repair center. Be sure to follow the specifications below when requesting repairs/sending the board to the repair center. Not following the
Put the Game Board in the carton box as is. Do not carry out any disassembly or part removal other than that specified. Follow the procedure and instructions regarding direction below when placing the Game Board in the carton box. When packing the game board with the Media Board attached, do not remove the Key Chip. When packing the game board with the Media Board detached, be sure to include the AVIP Cable.
@ Wrap the Chihiro Board in a plastic bag.
@ Place it on top of the bottom surface cushioning material. Turn the Filter Board to face the side with the three honeycomb buffers. Placing it in the opposite direction may cause damage to the Filter Board.
@ Insert corrugated cardboard into the space between the lateral honeycomb buffers of the bottom surface cushioning material and stow the AVIP cable inside.
@ Place the Chihiro Board wrapped in the bottom surface cushioning material into the carton box. Use the handles on the bottom surface cushioning material.
@ Place the upper surface cushioning material on top of the Chihiro Board. Be sure to align it in the right direction, as it will not fit otherwise.
@ Close the top of the carton box and seal it tightly with adhesive tape.
Key Chip Filter Board
Plastic bag Top surface cushioning material
Corrugated cardboard
Three honeycomb buffers
Box
FIG. 18.6a
HOW TO USE THE CARTON BOX (GD-ROM DRIVE)
ee)
FIG. 18.6b
- NETWORK PLAY
Up to 4 machines can be linked for network play. Properly connected network cables and correct network play settings are required for network play.
19-1 PRECAUTIONS REGARDING NETWORK PLAY SETUP
Before starting to work, ensure that the Power SW is OFF. Failure to observe this can cause electric shock or short circuit.
@ To perform work safely, be sure to secure the space corresponding to number of machines to be linked. Failure to observe this can cause accident.
When connecting several games machines together, make sure that a sufficient amount of electrical power is available for each machine. Plan on providing 7A for each machine in 100-120V locations, and 4A in 220-240V locations.
SPACING OF GAME MACHINES,
Be sure to secure space in excess of the described distance between machines.
4 ,
700mm 700mm 700mm
200mm.
200mm
200mm.
‘all
FIG. 19. 1
19-2 CONNECTING NETWORK CABLES
To enable network play, the hubs inside each of the game machines involved must be connected with network (LAN) cables. Connect the hub inside one of the machines to the hubs in each of the other machines using LAN cables. There is no need to connect the other machines to each other.
Do not connect LAN cables to game machines when they are not used for network play.
The following procedure requires the included LAN cables, the master key and a M4-size screwdriver.
@ Turn off the power and unplug the power cord from the outlet. Place the power cord so as not to damage it while working.
@ Using Section 7 of this manual as reference, move the machines so that they are lined up. Leave enough space on the back lid side of the machine to perform the rest of the operations in this procedure.
@ The edge holders (the holes through which the LAN cables are threaded) are located on the left and right sides of the lower back lid. Decide how the LAN cables should be threaded according to the layout of the machines. To reach the edge holders, loosen 2 of the screws on the cable cover and slide the cover aside.
SCREW (2), black PHOTO 19. 2a CABLE COVER M4x 8, w/flat & spring washers
@ Tighten the 2 screws firmly to secure the cable cover in place.
@ Remove the 6 screws from the lower back lid and then remove the lid.
SCREW (6), black M4x 8, w/flat & spring washers
@ Pass the LAN cable through the edge holder (the rectangular frame-shaped plastic part.) Pressing down on the edge holder from above will cause it to stretch elastically and open up.
@ Plug the connector on the end of the LAN cable into port 2 or above on the hub. Port 1, located at the front closest to the front lid, is connected to the Chihiro in the base interior. Any of the ports 2 or above can be used to connect to any of the other game machines. Since the hub in one machine will be connected to the hubs in each of the other machines via LAN cables, only one machine needs to be fitted with enough LAN cables for all machines involved. The other machines will only have 2 cable connections each.
@ Replace the lower back lid. PHOTO 19. 2c
@ Once the machines have been linked for network play, line them up. Leave as much space as possible between the machines.
@ Secure all adjustors on each machine. (See 2 of Section 6.)
@ Connect the power cord and grounding wire for each machine. (See 4 of Section 6.)
@ Assemble the POP Network.
@Use the double-sided tape of the POP Network and attach to the FL Cover.
19-3 NETWORK PLAY SETTINGS
Each of the linked machines must be set up for network play. If the machines are not set up correctly, network play will not be possible.
HOW TO SET UP A MACHINE FOR NETWORK PLAY
@ Turn off the power on each machine to be used in network play.
@ Enter Test mode on each machine. (See 9-2.)
@ Select GAME TEST MODE and press the TEST Button. The machine will enter Game Test mode and the screen will display the Game Test menu. (See 9-3.)
@ Select GAME ASSIGNMENTS from the Game Test menu and press the TEST Button. The Network Settings screen will appear. Network settings are carried out on this screen.
GAME ASSIGNMENTS
DIFFICULTY NORMAL CABINET STANDARD. ADVERTISE SOUND ON LANGUAGE ENGLISH SPEEDOMETER KILO QUICK START OFF LINK_ID 1 TOTAL MACHINE 1 GROUP 1
--> EXIT
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON
FIG. 19.3
@ Set the LINK_ID setting on the screen so that each machine within a group has a different number. Make sure that one machine in each group is set to "1".
@ Set the TOTAL MACHINE setting on the screen to the number of game machines linked for network play.
@ Set up the GROUP setting on the screen. The GROUP setting is used to divide the machines linked for network play into groups. For example, a network of 4 machines could be divided into 2 groups of 2 machines.
@ Exit Test mode on each machine. Be sure to choose EXIT from the System Test Menu to exit Test mode properly.
@ Once each machine has exited Test mode and gone through initialization, it will begin a network test. During the network test, the monitor will display a network test screen. If there are no problems with network play settings or cable connections, the machine will enter Advertising mode.
@ Ifthe advertising screen appears after the network test is finished, network settings are complete. The network test should last roughly 20 to 30 seconds. If the network test screen fails to disappear, the problem is most likely due to one of the following: incorrect settings, an improperly connected LAN cable, a faulty LAN cable connection, or a severed wire.
19-4 GENERAL PRECAUTIONS REGARDING NETWORK PLAY
@ When setting up machines for network play, settings such as the game's difficulty level will be derived from the machine whose LINK_ID is set to "1". If settings on machine "1" are changed, the other machines will have their settings changed
- DESIGN RELATED PARTS
999-1990 arquee Artwork ORTT
999-1966 Decal Instruction Left ORTMD, ’ * z 999-1987 Decal Monitor Side Right ORTT 999-1986 Decal Monitor Side Left ORTT
999-1965 FRI-2002 Decal Instruction ORTT
DYN-1214-C RPM Gauge DYN-1214-D Oil Gauge DYN-1214-E Water Gauge
999-1968 Decal Seat B ee 999-1992
Decal Base Right ORTT 999-1991 Decal Base Left ORTT
- PARTS LIST
ITEM NO. PART NO.
1 999-1985 2 Local Purchase 3 999-1983 4 999-1984 5 999-1988 6 999-1989 7 999-0167 8 999-0169 9 999-1952 10 999-1953 1 DUT-2203 12 999-1977 13 DUT-2202 14 FRI-1601-A 15 ORT-2100 16 SPG-2200 DESCRIPTION NOTE
Marquee Clear Plex Fluorescent bulb 48” 40 watt UL Marquee Side Cap Left Marquee Side Cap Right Monitor Side Cap Left Monitor Side Cap Right Leg Leveler 1/2-13 3” Caster 160-2 1/2 Swivel Mat Floor Cabinet (Mod) Cushion Seat Black Lower Lower Seat Cushion Seat Black Upper Upper Seat Cover Rear Seat Blank Assy SW Plate Assy Accel & Brake “Coolwhite”
ITEM NO. PART NO. DESCRIPTION NOTE
| 1 | STC-1608 | Net Speaker Left |
| 2 | STC-1609 | Net Speaker Right |
| 3 | JBA-2001 | Control Panel Cover |
| 4 | SPG-2500 | Assy Handle Mecha |
| 5 | SPG-2001 | Steering Wheel |
| 6 | DYN-1209X | Handle Collar |
| 7 | INY-1204 | Cover Shifter Indy 500 |
| 8 | DYN-1223X | Cover Shifter B |
| 9 | 601-0408-91 | Assy Shifter Up & Down |
| 10 | Local Purchase | Monitor Glass 24-5/16x21-3/16x3/16 Grey Tint Tempered |
ASSY CONTROL PANEL
ASSY CONTROL PANEL
ITEM NO. PART NO. DESCRIPTION
| 1 | SPG-2001 | STEERING WHEEL |
| 2 | DYN-1209X | HANDLE COLLAR |
| 3 | FRI-2002 | STEERING EMBLEM |
| 4 | JBA-2001 | CONTROL PANEL COVER |
| 5 | SPG-1205 | CONTROL PANEL BRKT |
| 6 | INY-1204 | SHIFT COVER INY |
| 7 | DYN-1223X | SHIFT COVER B |
| 9 | SPG-1204 | SPL BLT M8 |
| 10 | SPG-2500 | ASSY HANDLE MECHA |
| at | 610-0408-91 | ASSY SHIFTER |
ASSY HANDLE MECHA (SPG-2500) D-1/2
aia]
$
QD os < APOE
&) © (@)
ASSY HANDLE MECHA (SPG-2500) D-2/2
ITEM NO. PART NO. DESCRIPTION NOTE
| 1 | SPG-2501 | HANDLE BASE |
| 2 | SPG-2502 | BASE LID |
| 3 | SPG-2503 | HANDLE SHAFT |
| 4 | SPG-2504 | PULLEY 20 SSM |
| 5 | SPG-2505 | PULLEY 60 SSM |
| 6 | SPG-2506 | MOTOR BRKT |
| 7 | SPG-2507 | VR BRKT |
| 8 | SPG-2108 | STOPPER BOLT |
| 9 | SPG-2109 | STOPPER RUBBER |
| 10 | SPG-2453 | KEY 4%4x40 |
| ll | ASK-3502 | MOTOR SPACER |
| 12 | ASK-3503 | MOTOR COLLAR |
| 13 | DYN-1270 | STOPPER KEY |
| 14 | SLC-1130 | ADJUST RING |
| 15 | SPG-2454 | MOTOR SHAFT COLLAR |
| 101 | 350-5448-01 | SERVO MOTOR 500W NEW |
| 102 | 100-5112 | BEARING 17 |
| 103 | 601-8966 | GEAR HOLDER |
| 104 | 601-6172 | GEAR 48 |
| 105 | 601-6959 | GEAR 64 |
| 106 | 601-9173 | TIMING BELT |
| 107 | 220-5484 | VOL CONT B-5K OHM |
220-5373 VOL CONT B-5K
| 108 | 310-5029-F20 | SUMITUBE F F 20MM |
| 201 | 028-A00408-P | SET SCR HEX SKT CUP P M4x8 |
| 202 | 028-A00308-P | SET SCR HEX SKT CUP P M3x8 |
| 203 | 065-S012S0-Z | STP RING BLK OZ S12 |
| 204 | 065-S020S0-Z | STP RING BLK OZ S20 |
| 205 | 000-P00408-W | M SCR PH W/FS M4x8 |
| 206 | 000-P00412-W | M SCR PH W/FS M4x12 |
| 207 | 030-000612-S | HEX BLT W/S M6x 12 |
| 208 | 060-F00600 | FLT WSHR M6 |
| 209 | 050-U00600 | U NUT M6 |
| 210 | 030-000840-S | HEX BLT W/S M8x40. |
| 211 | 068-852216 | FLT WSHR 8.5-22 x1.6 |
| 212 | 050-U00800 | U NUT M8 |
| 301 | 600-6866 | WIRE HARN ASSY HANDLE MECHA VR |
ASSY ACCEL&BRAKE (SPG-2200)
ASSY ACCEL& BRAKE (SPG-2200)
ITEM NO. PART NO. DESCRIPTION NOTE
| 1 | SPG-2201 | BASE |
| 2 | SPG-2202 | ACCEL PEDAL |
| 3 | SPG-2203 | BRAKE PEDAL. |
| 4 | SPG-2204 | ACCEL SPRING |
| 5 | SPG-2205 | BRAKE SPRING |
| 6 | SPG-2206 | SHAFT |
| 7 | SPG-2207 | ACCEL GEAR |
| 8 | SPG-2208 | BRAKE GEAR |
| 9 | SPG-2209 | NEUTRAL STOPPER |
| 10 | SPG-2210 | VR PLATE ACCEL |
| 1 | SPG-2211 | VR PLATE BRAKE |
| 12 | SPG-2212 | AMPL GEAR |
| 13 | SPG-2213 | GEAR SHAFT |
| 14 | SPG-2214 | STOPPER |
| 15 | SPG-2215 | RUBBER CUSHION |
| 16 | SPG-2216 | COVER |
| 17 | SPG-2217 | VR COVER |
| 19 | SPG-2219 | GEAR STAY |
| 20 | SPG-2220 | WSHR |
| 21 | SPG-2221 | NEUTRAL STOPPER D |
| 101 | 100-5263 | BEARING 12(OILES 80F-1212) |
| 102 | 220-5484 | VOL CONT B-SK OHM |
| 104 | 601-7944 | GEAR 15 |
| 105 | 310-5029-F15 | SUMITUBE F FISMM |
| 106 | 280-0419 | HARNESS LUG |
| 201 | 028-A00304-P | SET SCR HEX SKT CUP P M3x4. |
| 202 | 020-000520-0Z | HEX SKT H CAP SCR BLK MSx20 |
| 203 | 000-P00420 | M SCR PH M4x20 |
| 204 | 000-P00508-W | M SCR PH W/FS M5x8 |
| 205 | 000-T00408-0C | M SCR TH CRM M4x8 |
| 206 | FAS-450005 | SPR PIN BLK OZ 6x10 |
| 207 | 000-P00405 | M SCR PH M4x5 |
| 208 | FAS-000001 | M SCR TH CRM M3x6 |
| 209 | 050-H00500 | HEX NUT M5 |
| 210 | 060-F00400 | FLT WSHR M4 |
ELECTRONICS LOWER
ITEM NO. PART NO.
1 601-11351 2 400-5443 3 XKT-0833 4 843-0005D-01
DESCRIPTION NOTE
SW Hub Melco LSW 10/100-8H Power Supply Kit GDRom drive w/ Label Assy Case Box ORT USA
ELECTRONICS UPPER
ITEM NO. PART NO. DESCRIPTION NOTE
| 1 | 837-13551-92 | V/O Control BD for JVS |
| 2 | 838-13578 | Power Amp 2ch & Mixer |
| 3 | 998-0138 | Transformer ER-503 |
| 4 | 838-14174 | Servo Motor Drive BD Midi |
- WIRE COLOR CODE TABLE
THE WIRE COLOR CODE is as follow:
moawpe PINK.
SKY BLUE
BROWN
PURPLE
LIGHT GREEN
Wires other than those of any of the above 5 single colors will be displayed by 2 alphanumeric characters.
CaerdKWRwWwNe RED
BLUE
YELLOW
GREEN
WHITE
ORANGE
BLACK
GRAY
If the right-hand side numeral of the code is 0, then the wire will be of a single color shown by the left-hand side numeral (see the above).
<Example> 51 ......... WHITE / RED
NON ON
RED WHITE
The character following the wire color code indicates the size of the wire.
U: AWG16
K: AWGI18
Ls AWG20
None: AWG22
Warranty
Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating conditions. No other product in this machine is hereby covered.
Sellers sole liability in the event a warranted part described above fails shall be, at its option, to replace or repair the defective part during the warranty period. For Warranty claims, contact your Sega Distributor.
Should the Seller determine, by inspection that the product was caused by Accident, Misuse, Neglect, Alteration, Improper Repair, Installation or Testing, the warranty offered will be null and void.
Under no circumstances is the Seller responsible for any loss of profits, loss of use, or other damages.
This shall be the exclusive written Warranty of the original purchaser expressed in lieu of all other warranties expressed or implied. Under no circumstance shall it extend beyond the period of time listed above.
SEGA AMUSEMENTS USA, INC.
45133 Industrial Drive Fremont, CA 94538 (415) 701-6580 phone (415) 701-6594 fax