CATHODE RAY TOMES

P.O.W. Prisoners of War

P.O.W. - Prisoners of War (US version 1) (SNK, 1988) · Manual · 16 pages · 4 sections · original scan

Page 1

, } j ‘|

\

i

LANIEL

AUTOMATIQUE

151 CH. ROCKLAND, MTL. HP 2w3 TEL.: (514) 731-8571

Page 2

INTRODUCTION

Congratulations on selecting this fine SNK game. This product has been constructed of the finest materials available to ensure many years of reliable service. The cabinet has been fabricated by Dynamo Corporation, the monitor is manufactured by Wells-Gardner Corporation, the coin door is from Coin Controls, Incorporated, and the game PCB was developed and manufactured by SNK Corporation in Japan.

The Dynamo production staff was responsible for assembling and packaging the final product that you have here. These folks manufacture games for many of the major game suppliers and are highly respected for their fine workmanship. As is true with any product regardless of how carefully it is constructed, imperfections can occasionally slip through the inspection. Therefore, before applying power to your new game, please take a few moments to examine the game to ensure all assemblies are secured, connected, and no signs of physical damage are evident.

The game pcb is a sophisticated hi-speed computer system. It has been developed by SNK Corporation to provide the fine graphics, sound, and control response essential for success of this game. Due to the complex nature of it’s design, we strongly recommend that in the event a failure of this system occurs, do not attempt to make repairs in the field. Please note that repairs made or attempted in the field will void the 90 day warranty provided with each game. During the warranty period, «replacement pcbs are available simply by contacting your local SNK Authorized Distributor. You must supply the Cabinet Serial Number when requesting a replacement pcb from your distributor.

‘ The staff of SNK Corporation is pleased that you have chosen “our product for your business. Feel free to call upon us for any assistance that we may provide you. We have included a Customer Response Form in the back of this manual. Please take a few moments to write down your thoughts and comments in the space provided. Your firm will be placed on a mailing list for Technical and Field updates. e Md

ow sek

Page 3

age I.

Il.

Ill. P.O.W.

(PRISONERS OF WAR)

UPRIGHT GAME MANUAL

TABLE OF CONTENTS

GENERAL INFORMATION

A. SNK WARRANTY POLICY. . B. SET-UP INSTRUCTIONS........... 02 -e cece ee eee eees

OPERATION INFORMATION

A. GAME PLAY... 2... eee cece eee ence eee B. DIP-SWITCH SELECTABLE OPTIONS. C. SELF-TEST DESCRIPTION. ....... 00. cece eee eeeee

TECHNICAL INFORMATION

A. B.

© 1988 SNK CORPORATION OF AMERICA 246 SOBRANTE WAY SUNNYVALE, CA. 94086

FIRST PRINTING 8/15/88

Page 4

P.O.W. CUSTOMER RESPONSE CARD

THANK YOU FOR PURCHASING THE PRISONERS OF WAR UPRIGHT GAME. FOR ADDITIONAL TECHNICAL INFORMATION AND SCHEMATICS ON THIS PRODUCT, PLEASE COMPLETE THE FORM BELOW AND MAIL IT TO THE ADDRESS SPECIFIED. SNK WILL MAIL YOU THE SERVICE MANUAL WHEN IT I5 AVAILABLE, AND PUT YOUR FIRM ON A MAILING LIST FOR PERIODIC TECHNICAL INFORMATION AND SERVICE BULLETINS.

CUSTOMER INFORMATION

COMPANY NAME: ADDRESS: CITY, STATE: TELEPHONE: YOUR NAME: ZIP.

GAME INFORMATION

SERIAL NUMBER: DATE RECEIVED:

INDICATE CONDITION OF GAME WHEN RECEIVED:

COMMENTS ON SNK PRODUCTS AND/OR SERVICES:

PLEASE RETURN THIS CARD TO:

SNK CORPORATION OF AMERICA 246 SOBRANTE WAY SUNNYVALE, CA. 94086

ATIN: COIN-OP CUSTOMER SERVICE

Page 5

C. Replacement, Parts List.

The following list contains the replacement parts available for your P.O.W. (Prisoners of War) game. These parts are available from any authorized SNK distributor. When ordering replacement parts, please specify the name of the game, item number, and description. This will aid in expediting your order.

FINAL ASSEMBLY, P.O.W. UPRIGHT GAME

“PRODIAAAWNE CABINET ASSEMBLY (DYNAMO HS-1) MONITOR ASSEMBLY, 19" DIA. (WELLS-GARDNER 19K7602) POWER SUPPLY ASSEMBLY, 11AMP (DYNAMO) COIN DOOR ASSEMBLY (COIN CONTROL #10-1110-09) CONTROL PANEL ASSEMBLY, P.O.W. PCB ASSEMBLY, P.O.W. LOGO PLEX, P.O.W. TUBE CARD, P.O.W. SIDE DECAL, LEFT, P.O.W. 0 SIDE DECAL, RIGHT, P.O.W. 1 MANUAL, P.O.W. OPERATION & SERVICE

POWER SUPPLY ASSEMBLY, 11 AMP

12 SWITCHING REGULATOR (IMPERIAL 11 AMP) 13 ISOLATION TRANSFORMER, 115VAC, 1 AMP (RAVENSWOOD) 14 EMI FILTER, 5 AMP (CORCOM)

CONTROL PANEL ASSEMBLY, P.O.W.

15 CONTROL PANEL, BARE, P.O.W. 16 CONTROL PANEL OVERLAY, P.O.W. 17 JOYSTICK, 8-WAY MICROSWITCH, RED (HAPP ) °18 JOYSTICK, 8-WAY MICROSWITCH, BLUE (HAPP) 19 PUSHBUTTON, MICROSWITCH, RED (HAPP) 20 PUSHBUTTON, MICROSWITCH, BLUE (HAPP) 21... PUSHBUTTON, 1 PLAYER START (HAPP) 22° PUSHBUTTON, 2 PLAYER START (HAPP) 23 REPLACEMENT MICROSWITCH, (CHERRY D44 OR EQUIVALENT I. GENERAL INFORMATION

A. SNK Warranty Policy.

SNK Corporation of America (Seller) warrants to the original purchaser (Buyer) that the products listed below are free from defects in manufacturing and materials.

The warranty period is 90 days, and is effective from the date of original shipment from Seller’s factory. The items covered by this warranty are specified as follows:

GAME CPU PRINTED CIRCUIT BOARD(S) POWER SUPPLY SWITCHING REGULATOR MONITOR ASSEMBLY

No other parts of Seller’s product are covered by this policy.

The Seller’s sole responsibilty shall be, at it’s discretion, to repair or replace any warranted items found to be defective during the warranty period. The Buyer’s responsibility shall be to notify Seller that defective material has been received, and return it, freight pre-paid, as per Seller’s instructions.

Seller is not responsible for any costs of unauthorized repairs, loss of income, or any other charges or losses incurred as a result of the use of this product. Seller does not warrant the suitability of it’s product for a particular application.

This warranty will be void if inspection of the product shows damage was the result of misuse, or if unauthorized repairs were attempted, or if the item was damaged due to handling, shipping, customer negligence, or abuse.

Page 6

B. Set-up Instructions

The P.O.W. (Prisoners of War) game is shipped adjusted, tested, and ready for operation. The only assembly required is the installation of the four (4) Leg Levelers to the floor of the cabinet. These can be found packed in the Cash Box. To install the Leg Levelers, lay the game down onto it’s back and screw the levelers into the threaded holes in the floor of the cabinet. Restore the cabinet to the upright position and adjust the leveler’s until the cabinet sits flat and does not rock. Tighten the retaining hex nuts to secure.

At this point, the game is ready to operate, however you may need to alter the Dip-Switch Options and set the proper Sound Volume level. Refer to the Dip-Switch table in Chapter II, section B for specific information. The Sound Volume is adjustable via a trimpot found on the Main CPU peb. See figure 1 for the locations of the Dip-Switches and Volume Control.

The Power Supply voltage (+5vdc) has been pre-set at the factory to between +4.90vdc to +5.15vde at the CPU PCB edge connector. The two power supply check LEDs on the CPU PCB are for for indicating that the voltage is present only, they do not indicate proper voltage level is set.

FIGURE 1—

12V LED © 5V LED CE

NOTE: Ee RE DIP Sv J

Ce SOUND VOLUAE III. TECHNICAL INFORMATION

A. Wiring Diagram.

hi i. giatite §a..8E aaeeaaa Pree sages HIST a : FH cee aa ii oe * ih

NOTE: PING 1 THRU 28 » PARTS SIDE. PING A THRU f = SOLDER SIDE

Hag [em comm couacrer

CABINET WIRING DIAGRAM=

Page 7
  • LEVER & BUTTON TEST

a LEVER ere 1 ow Starrs ‘next

ou te cow pie, a0 piezo 0 sou 2 ecco 008 2002060 %

  • BACK CHARACTER TEST

So BACK CHARACTER

  • SPRITE TEST

FONT

  • SOUND TEST 7 SOON

‘SOUND CODE = 40 merc 40 70 errect 91 oF voice co FF sroe oe When a joystick or button is activated, the “0” on the display will turn to a “1°.

Confirm that the characters are displayed on the monitor. Move Blue joystick to change image.

Confirm that the Blue Hero Character is displayed on the monitor. Move Blue joystick to change image and position.

Set up the Sound Code (?) to 41-7B or 81-BB by moving the joystick, or by pressing the Kick Button at “CO- FF. Set the Sound Code to OE and press the Kick Button to stop the sound. II. OPERATION INFORMATION

A. Game Play.

P.O.W. (Prisoners of War) is a one or two player interactive coin operated video game. The player controls his "Prisoner" via one 8-way joystick and three push-buttons (see figure 2). The function of the joystick is to manuever the player image up, down, left, and right on the screen. The three- push-buttons control the attack and jump functions of the player image.

FIGURE 2:

OO <>) IP START 2P START

The player is attempting a daring escape from a enemy prison camp. At the start of a game, the game displays an animated scene of the prisoner(s) blowing open the door of their cell. They then try to move thru the prison camp to freedom. Along the way, the enemy is attacking them to prevent their escape. Many of the enemy soldiers are armed with knives and sub-machine guns, which the player can knock out of the enemy’s hands and use to his advantage. <

The possible moves and combination moves are shown below:

BUTTONWITH NO WEAPONWITH KNIFEWITH GUN
APUNCHTHROW KNIFEHIT WITH GUN
BJUMPJUMPJUMP

Cc KICK KICK SHOOT GUN

A+BBACK PUNCHN/AN/A
A+CHEAD BUTTN/AN/A
B+CJUMP KICKJUMP KICKJUMP KICK
Page 8

B. Dip-Switch Options.

The P.O.W. game can be adjusted for optimum suitability for the location in which it is to be operated. To alter the current settings, remove power to the game, locate the two banks of 8 position Dip-Switches (see figure 1), and change the position of the switches to the required options. Use a small flat blade screwdriver or your fingernail to change the settings of the switches.

BRL GUE Qe CONTENTS | 1 INORWAL___——=«d;C REVERSE ___| ISECOND BONUS

OOF [TWO (2) | Meters INCOIN/IPLAY | BAYEING

COIN! I4COIN/IPLAY _| GAME PRICING |i COIN/2PLAY __| cone | LCOIN/3PLAY | NCOIN/4PLAY | 2 |

=

; fe °o 72) > < = < PT TTT TT TTT felst Tye LT TT TT TT felst TTT [>|

GAME DIF- |(2) STANDARD | oFF| (1)_ EASY KI FICULTY

  • HARD [ ovr]
  • VERY.HARD _[ on | DEMO MODE |_ YES] SOUND a a NEVER FINISH GAME MODE TsToP_DISPLAY =

BONUS [20000/50000_ |__| tst/2np [49000/100000 | | [so000/150000 | |

= NO BONUS CONTINUE GAME. MODE | = NOs C. Self Test Description.

The Memory IC’s (Integrated Circuits) and Sound Circuit is automatically checked each time power is applied. In the event a problem is detected, the test will stop and an Error Code will be displayed on the screen. This is an indication only, and should be utilized only as a starting point for trouble-shooting.

To place the game in Manual Self Test mode, set switch 2 of Dip-Switch 2 to the “ON” position and apply power to the game. The screen will display a the first test. Press the 1 Player Start button to advance to the next test.

The sequence of tests are as follows:

  • DIP MODE CHECK

° Set up the Dip-Switch settings as re eee S ESE MUGS SSEEST | OL the Table in Figure 3. The Prarie weep, screen displays each bit as a “1° or vero 2 “O° (on or off). comm pays a come maya a veve 2 EHO SOUND OW A8r Bonus 40000 ‘SECOND BONUS 2ND BONIS 100000 ore 4 ON crepiy

  • CROSS-HATCH

+ Adjust monitor for a square pattern

: i C throughout the display and on the

edge of the monitor.

:

  • COLOR TEST
  • cour Assure that the colors are properly wired to the monitor, and adjusted [ for proper intensity. eo concen sue
Page 9

B. Dip-Switch Options.

The P.O.W. game can be adjusted for optimum suitability for the location in which it is to be operated. To alter the current settings, remove power to the game, locate the two banks of 8 position Dip-Switches (see figure 1), and change the position of the switches to the required options. Use a small flat blade screwdriver or your fingernail to change the settings of the switches.

BRL GUE Qe CONTENTS | 1 INORWAL___——=«d;C REVERSE ___| ISECOND BONUS

OOF [TWO (2) | Meters INCOIN/IPLAY | BAYEING

COIN! I4COIN/IPLAY _| GAME PRICING |i COIN/2PLAY __| cone | LCOIN/3PLAY | NCOIN/4PLAY | 2 |

=

; fe °o 72) > < = < PT TTT TT TTT felst Tye LT TT TT TT felst TTT [>|

GAME DIF- |(2) STANDARD | oFF| (1)_ EASY KI FICULTY

  • HARD [ ovr]
  • VERY.HARD _[ on | DEMO MODE |_ YES] SOUND a a NEVER FINISH GAME MODE TsToP_DISPLAY =

BONUS [20000/50000_ |__| tst/2np [49000/100000 | | [so000/150000 | |

= NO BONUS CONTINUE GAME. MODE | = NOs C. Self Test Description.

The Memory IC’s (Integrated Circuits) and Sound Circuit is automatically checked each time power is applied. In the event a problem is detected, the test will stop and an Error Code will be displayed on the screen. This is an indication only, and should be utilized only as a starting point for trouble-shooting.

To place the game in Manual Self Test mode, set switch 2 of Dip-Switch 2 to the “ON” position and apply power to the game. The screen will display a the first test. Press the 1 Player Start button to advance to the next test.

The sequence of tests are as follows:

  • DIP MODE CHECK

° Set up the Dip-Switch settings as re eee S ESE MUGS SSEEST | OL the Table in Figure 3. The Prarie weep, screen displays each bit as a “1° or vero 2 “O° (on or off). comm pays a come maya a veve 2 EHO SOUND OW A8r Bonus 40000 ‘SECOND BONUS 2ND BONIS 100000 ore 4 ON crepiy

  • CROSS-HATCH

+ Adjust monitor for a square pattern

: i C throughout the display and on the

edge of the monitor.

:

  • COLOR TEST
  • cour Assure that the colors are properly wired to the monitor, and adjusted [ for proper intensity. eo concen sue
Page 10
  • LEVER & BUTTON TEST

a LEVER ere 1 ow Starrs ‘next

ou te cow pie, a0 piezo 0 sou 2 ecco 008 2002060 %

  • BACK CHARACTER TEST

So BACK CHARACTER

  • SPRITE TEST

FONT

  • SOUND TEST 7 SOON

‘SOUND CODE = 40 merc 40 70 errect 91 oF voice co FF sroe oe When a joystick or button is activated, the “0” on the display will turn to a “1°.

Confirm that the characters are displayed on the monitor. Move Blue joystick to change image.

Confirm that the Blue Hero Character is displayed on the monitor. Move Blue joystick to change image and position.

Set up the Sound Code (?) to 41-7B or 81-BB by moving the joystick, or by pressing the Kick Button at “CO- FF. Set the Sound Code to OE and press the Kick Button to stop the sound. II. OPERATION INFORMATION

A. Game Play.

P.O.W. (Prisoners of War) is a one or two player interactive coin operated video game. The player controls his "Prisoner" via one 8-way joystick and three push-buttons (see figure 2). The function of the joystick is to manuever the player image up, down, left, and right on the screen. The three- push-buttons control the attack and jump functions of the player image.

FIGURE 2:

OO <>) IP START 2P START

The player is attempting a daring escape from a enemy prison camp. At the start of a game, the game displays an animated scene of the prisoner(s) blowing open the door of their cell. They then try to move thru the prison camp to freedom. Along the way, the enemy is attacking them to prevent their escape. Many of the enemy soldiers are armed with knives and sub-machine guns, which the player can knock out of the enemy’s hands and use to his advantage. <

The possible moves and combination moves are shown below:

BUTTONWITH NO WEAPONWITH KNIFEWITH GUN
APUNCHTHROW KNIFEHIT WITH GUN
BJUMPJUMPJUMP

Cc KICK KICK SHOOT GUN

A+BBACK PUNCHN/AN/A
A+CHEAD BUTTN/AN/A
B+CJUMP KICKJUMP KICKJUMP KICK
Page 11

B. Set-up Instructions

The P.O.W. (Prisoners of War) game is shipped adjusted, tested, and ready for operation. The only assembly required is the installation of the four (4) Leg Levelers to the floor of the cabinet. These can be found packed in the Cash Box. To install the Leg Levelers, lay the game down onto it’s back and screw the levelers into the threaded holes in the floor of the cabinet. Restore the cabinet to the upright position and adjust the leveler’s until the cabinet sits flat and does not rock. Tighten the retaining hex nuts to secure.

At this point, the game is ready to operate, however you may need to alter the Dip-Switch Options and set the proper Sound Volume level. Refer to the Dip-Switch table in Chapter II, section B for specific information. The Sound Volume is adjustable via a trimpot found on the Main CPU peb. See figure 1 for the locations of the Dip-Switches and Volume Control.

The Power Supply voltage (+5vdc) has been pre-set at the factory to between +4.90vdc to +5.15vde at the CPU PCB edge connector. The two power supply check LEDs on the CPU PCB are for for indicating that the voltage is present only, they do not indicate proper voltage level is set.

FIGURE 1—

12V LED © 5V LED CE

NOTE: Ee RE DIP Sv J

Ce SOUND VOLUAE III. TECHNICAL INFORMATION

A. Wiring Diagram.

hi i. giatite §a..8E aaeeaaa Pree sages HIST a : FH cee aa ii oe * ih

NOTE: PING 1 THRU 28 » PARTS SIDE. PING A THRU f = SOLDER SIDE

Hag [em comm couacrer

CABINET WIRING DIAGRAM=

Page 12

C. Replacement, Parts List.

The following list contains the replacement parts available for your P.O.W. (Prisoners of War) game. These parts are available from any authorized SNK distributor. When ordering replacement parts, please specify the name of the game, item number, and description. This will aid in expediting your order.

FINAL ASSEMBLY, P.O.W. UPRIGHT GAME

“PRODIAAAWNE CABINET ASSEMBLY (DYNAMO HS-1) MONITOR ASSEMBLY, 19" DIA. (WELLS-GARDNER 19K7602) POWER SUPPLY ASSEMBLY, 11AMP (DYNAMO) COIN DOOR ASSEMBLY (COIN CONTROL #10-1110-09) CONTROL PANEL ASSEMBLY, P.O.W. PCB ASSEMBLY, P.O.W. LOGO PLEX, P.O.W. TUBE CARD, P.O.W. SIDE DECAL, LEFT, P.O.W. 0 SIDE DECAL, RIGHT, P.O.W. 1 MANUAL, P.O.W. OPERATION & SERVICE

POWER SUPPLY ASSEMBLY, 11 AMP

12 SWITCHING REGULATOR (IMPERIAL 11 AMP) 13 ISOLATION TRANSFORMER, 115VAC, 1 AMP (RAVENSWOOD) 14 EMI FILTER, 5 AMP (CORCOM)

CONTROL PANEL ASSEMBLY, P.O.W.

15 CONTROL PANEL, BARE, P.O.W. 16 CONTROL PANEL OVERLAY, P.O.W. 17 JOYSTICK, 8-WAY MICROSWITCH, RED (HAPP ) °18 JOYSTICK, 8-WAY MICROSWITCH, BLUE (HAPP) 19 PUSHBUTTON, MICROSWITCH, RED (HAPP) 20 PUSHBUTTON, MICROSWITCH, BLUE (HAPP) 21... PUSHBUTTON, 1 PLAYER START (HAPP) 22° PUSHBUTTON, 2 PLAYER START (HAPP) 23 REPLACEMENT MICROSWITCH, (CHERRY D44 OR EQUIVALENT I. GENERAL INFORMATION

A. SNK Warranty Policy.

SNK Corporation of America (Seller) warrants to the original purchaser (Buyer) that the products listed below are free from defects in manufacturing and materials.

The warranty period is 90 days, and is effective from the date of original shipment from Seller’s factory. The items covered by this warranty are specified as follows:

GAME CPU PRINTED CIRCUIT BOARD(S) POWER SUPPLY SWITCHING REGULATOR MONITOR ASSEMBLY

No other parts of Seller’s product are covered by this policy.

The Seller’s sole responsibilty shall be, at it’s discretion, to repair or replace any warranted items found to be defective during the warranty period. The Buyer’s responsibility shall be to notify Seller that defective material has been received, and return it, freight pre-paid, as per Seller’s instructions.

Seller is not responsible for any costs of unauthorized repairs, loss of income, or any other charges or losses incurred as a result of the use of this product. Seller does not warrant the suitability of it’s product for a particular application.

This warranty will be void if inspection of the product shows damage was the result of misuse, or if unauthorized repairs were attempted, or if the item was damaged due to handling, shipping, customer negligence, or abuse.

Page 13

P.O.W. CUSTOMER RESPONSE CARD

THANK YOU FOR PURCHASING THE PRISONERS OF WAR UPRIGHT GAME. FOR ADDITIONAL TECHNICAL INFORMATION AND SCHEMATICS ON THIS PRODUCT, PLEASE COMPLETE THE FORM BELOW AND MAIL IT TO THE ADDRESS SPECIFIED. SNK WILL MAIL YOU THE SERVICE MANUAL WHEN IT I5 AVAILABLE, AND PUT YOUR FIRM ON A MAILING LIST FOR PERIODIC TECHNICAL INFORMATION AND SERVICE BULLETINS.

CUSTOMER INFORMATION

COMPANY NAME: ADDRESS: CITY, STATE: TELEPHONE: YOUR NAME: ZIP.

GAME INFORMATION

SERIAL NUMBER: DATE RECEIVED:

INDICATE CONDITION OF GAME WHEN RECEIVED:

COMMENTS ON SNK PRODUCTS AND/OR SERVICES:

PLEASE RETURN THIS CARD TO:

SNK CORPORATION OF AMERICA 246 SOBRANTE WAY SUNNYVALE, CA. 94086

ATIN: COIN-OP CUSTOMER SERVICE

Page 14

age I.

Il.

Ill. P.O.W.

(PRISONERS OF WAR)

UPRIGHT GAME MANUAL

TABLE OF CONTENTS

GENERAL INFORMATION

A. SNK WARRANTY POLICY. . B. SET-UP INSTRUCTIONS........... 02 -e cece ee eee eees

OPERATION INFORMATION

A. GAME PLAY... 2... eee cece eee ence eee B. DIP-SWITCH SELECTABLE OPTIONS. C. SELF-TEST DESCRIPTION. ....... 00. cece eee eeeee

TECHNICAL INFORMATION

A. B.

© 1988 SNK CORPORATION OF AMERICA 246 SOBRANTE WAY SUNNYVALE, CA. 94086

FIRST PRINTING 8/15/88

Page 15

INTRODUCTION

Congratulations on selecting this fine SNK game. This product has been constructed of the finest materials available to ensure many years of reliable service. The cabinet has been fabricated by Dynamo Corporation, the monitor is manufactured by Wells-Gardner Corporation, the coin door is from Coin Controls, Incorporated, and the game PCB was developed and manufactured by SNK Corporation in Japan.

The Dynamo production staff was responsible for assembling and packaging the final product that you have here. These folks manufacture games for many of the major game suppliers and are highly respected for their fine workmanship. As is true with any product regardless of how carefully it is constructed, imperfections can occasionally slip through the inspection. Therefore, before applying power to your new game, please take a few moments to examine the game to ensure all assemblies are secured, connected, and no signs of physical damage are evident.

The game pcb is a sophisticated hi-speed computer system. It has been developed by SNK Corporation to provide the fine graphics, sound, and control response essential for success of this game. Due to the complex nature of it’s design, we strongly recommend that in the event a failure of this system occurs, do not attempt to make repairs in the field. Please note that repairs made or attempted in the field will void the 90 day warranty provided with each game. During the warranty period, «replacement pcbs are available simply by contacting your local SNK Authorized Distributor. You must supply the Cabinet Serial Number when requesting a replacement pcb from your distributor.

‘ The staff of SNK Corporation is pleased that you have chosen “our product for your business. Feel free to call upon us for any assistance that we may provide you. We have included a Customer Response Form in the back of this manual. Please take a few moments to write down your thoughts and comments in the space provided. Your firm will be placed on a mailing list for Technical and Field updates. e Md

ow sek

Page 16

, } j ‘|

\

i

LANIEL

AUTOMATIQUE

151 CH. ROCKLAND, MTL. HP 2w3 TEL.: (514) 731-8571