CATHODE RAY TOMES

Centipede ST-182 2nd Printing Backdoor Sheet

Centipede (revision 4) (Atari, 1980) · Backdoor Sheet · 1 pages · original scan

Page 1

) =

Self-Test Procedure

Instruction Results if Test Passes (Wf results are not 2s indicated, ‘s00 list of failures that follows)

  • Bogin: Set self-test switch to on position
  • Mini Trak Ball Test: Roll the MiniTrak Ball controls in all directions.
  • Switch Test: One after another, activate and release all controt-panel switches, the slam switch, and coin switches.*
  • Audio UO Chip Test: One after another, press and hold 2 of the contro-pane! switches and at least one of the coin switches.

5, Audio VO Channel Test: Press 1-player start button four times.

  • Background Color Test: Press ‘-player start button at least 16 times.
  • Object Color Test: Press 2>player start button at least 16 times.

8, Moving Object Test: Watch the screen, and move the MiniTrak Ball around. Place the moving object in an open area of the screen. Press fire button several times.

  • Erasing the High Score Table (optional) The current three highest scores are held in permanent memory, unplugged. f you want to erase these scores, simultaneously press either fire and two ‘The monitor displays the picture below. The game produces no sound at all, The two start-switch LEDs will stay on throughout seif-test.

The centipede head moves around on the screen in directions corresponding to Mini-Trak Ball control

‘As long as you activate (close) each switch, you'll hear a high beep.

Volume increases and pitch decreases with each additional switch that is activated.

You'll hear a high beep for each press of the button.

Background color changes with each press of the 1-player start button.

Objects on playtield change color.

Each press of the fire button changes the moving object to another mov: ing object. At certain points in the series, the object will disappear. This Is not a failure indication.

~ even if the game is

start buttons. The 4 FF message in the upper left corner of the screen will then be displayed. The average game time data will also be erased, but still displayed on the screen.

  • End: When satisfied with test, set selt-test switch to oft position.
  • Activate coin switches by inserting at least one coin in each coin slot. You will not trip the coin counters as long as you stay in self-test.

NO. OF LIVES AT ENTIRE ‘START OF GAME. CHARACTER SET

ALL SWITCHES & gorget SUi88t ¢,RCOIN ‘TRAK-BALL INPUTS. 7 MECH MULTIPLIERS

(L Rif you have a ‘2imech cola door) BONUS COIN SETTING (means “for every 3 coins inserted, log- TOTAL NO. OF

ic adds 1 more coin”). Blank if ‘CREDITS PLAYED

‘no bonus coins(s) given.

AVG. GAME TIME (accurate to +4 secs) GAME DIFFICULTY: ‘SETTING

Results if Test Falls

  • Begin: 2. MiniTrak Ball Test: RAM FAILURE is indicated by one to 10 beeps. Note the number of beeps and determine which RAM may be bad. To restart the test, press the reset pushbutton on the game PCB, or set the self test switch to off, then again to the on position. Possible Bad RAM Chip Location H2 Fo K7 KS. u

M7 MS N7 10 NB

Any bad RAM must be replaced before the computer can check the other RAMs, as well as continue with the self-test. Number of Beeps Given

ROMIPROM FAILURE is indicated by two groups of numbers in the upper left corner of the screen. The number at the far left indicates the location of the failing PROM/ROM(s). Identify the bad ROMIPROM with the table below. If the screen displays “gar- ‘bage,” or the logic produces strange audio or randomly activates the coin counters, the chip at location J1 is probably bad. Ignore the hexadecimal numbers just to the right of the chiplocation number.

Displayed Number

‘The character doesn't move in same direction as ball, jumps rather

than moves smoothly, or doesn't move at all. One of the Coupler PCBs in either Mint Trak Ball control may be bad, harness wires or connector may be loose, MiniTrak Ball reading circuitry on Game PCB may be bad, or Mini‘Trak Ball bearings may need oiling,

  • Switch Test: ‘Sound is constantly on, even though you are not activating any switch. Or, no beep is given for any switch, or LED is dark. Indicates a bad switch, loose hamess wires, bad LED-driving circuitry, volume turned all the way down, or loose connector.
  • Audio VO Chip Test:

'No increase in volume or decrease in pitch indicates bad custom

audio UO chip at location BYCID3.

  • Audio UO Channel Test: On one out of the four activations, no audio is produced. Indicates ‘one channel is bad in the custom U/O audio chip at location B/CID3 (replace entire chip).
  • Background Color Test: Background doesn't change color, or doesn’t display all 16 colors. Indicates bad color RAM chip. (RAM failure would have been indicated earlier with from 3 through 10 beeps.)
  • Object Color Test: Objects don’t change color, oF don't display all 16 colors. RAM failure.
  • Moving Object Test: ‘Object doesn't change to another object. ROM/RAM failure. sT-182 ™ 2nd printing

Game Price Settings

The white block below contains Atari's suggested settings. All ‘numbers 4 thru 8 are toggle settings on the &toggle switch at locaation NB, on the Centipede” Game PCB (the LEFT switch assembly). Circled numbers refer to game pricing labels you should use with each situation (labels are below), Use the label no. 6 indicated with) only if you set toggle 7 at PCB switch assembly P10 toon.

50¢ PER CREDIT

Important Note to Operators: If the operation, maintenance and service manual was not included in this game when you unpacked it, contact your distributor to get a free copy. (All Atari manuals for coin-operated games also include complete illustrated parts lists.)

No bonus

a7683
@®ononomon

Straight 2¢ Door

4324
OffOfOnoft

“The switch settings below relate to options for game price, coin ‘mechanism multipliers, and bonus play. This information is useful {in case you need to temporarily set the Centipede™ game on free ‘To achieve bonus plays, ll coins must be inserted before press: {ng the start button. The label no. 6 shown below should be used ‘only if you set toggle 8 at PCB switch assembly N9 to off. play, or If you have German coin mechanisms in your door. “Toggle Settings of Toggle Switch on Centipede PCB (at NOL LEFT switch when PCB I in gare

sore84&324

‘On On ort ott Option

Free play 1 coin* for 2 credits. 1coin* for t credit $ 2coins* for-t credit

Right coin mech x 1 $ Right coin mech x 4 Right coin mech x 5 Right coin mech x 6 Lett coin mech x 1 Left coin mech’ x 2

No bonus coins $

For every 2 coins* inserted, game logic adds 1 more ‘coin* For every 4 coins" inserted, game logic adds 1 more ‘coin* For every 4 coins* inserted, game logic adds 2 more coins* For every § coins* inserted, game logic adds 1 more coin* For every 3 coins* inserted, game logic adds 1 more coin® ott

off

On ont ort oft On off

ort 9 ¢ es

ort

on

“coin” is defined as 25¢. In Germany a “coin” is ‘$ Manufacturer's suggested settings *in the US., 10M.

N®@@2 coins = 1 play

OOOO 1 0875=3 Plays

pe@@2 coins

= @@®@ 3coins @O@@ 4 coins Falling ROM/PROM ‘Chip Location oF & Fim mS est eicios

+11 you replace or erase this ROM, the number 4 FF will be displayed throughout the selltest. The nex! time you enter self-test, r) . the 4 disappears after a game is played. Otherwise the self-test e @ 2 coins = 1 play will continue to display the numbers 4 FF. AX oa $1 coin =3 plays asi (Susan B. Anthony coin) Game Pricing Labels

@1 coin=1 play

AS @@ 2 coins =1 play anki 2 play minimum (coins = 2 plays)

(For operator use—write in the appropriate phrase. Use ‘a pormanent.ink water resis: tant marker) ne ian VOLUME INCREASE: TURN CLOCKWISE s

@1 coin=1 play

Game Option Settings, a ‘To change toggle positions on the switch assemblies, you need When changing the options, verify proper results on the moni- PEAN GAMES) ‘not remove the game PCB. The switches, usually colored blue, are VOLUME CONTROL ‘easily accessible when the Centipede Game PCB is mounted in tor display by performing the self-test. Note that changing an option on any of the following eight toggles will net cause an imme Coin Counter Option Settings place. diate change on the monitor screen during the attract mode.

  • [These toggles determine which coin mechanisms activate which counters) ‘Toggle Settings of &Toggle Switch on Centipede Game PCB (at N9)
(CENTER switch assembly when PCB Is In game)=--~~

0 : ow

>hs=Geb1eenTole Setings of Togawo coin acceptorsand a push-
ich on Game PCB (Nit)Two coin acceptorsbutton utility cain switch in theThree coin seceptors
430204in the coin door:game:inthecoin door:
OnOnEnglish $es-he_n actin do:
OoOFGermanOnOnBoth acceptors activate all coinDo not use this settingAll 3 are same denomination and
Offoff‘Spanishcounters simultaneously.they activate all coin counters si:

rmultaneously.

OnOn2 tives per game
Onoff3iives per game $(OnOffBoth acceptors activate 2 count:00 not use this setting.Lett and center acceptor activate
OfOn4 lives per gamees separatelyone coin counter;right acceptor ac:
ofoft5 lives per gamez2tivates another coin count
Bonus life granted at every:2=
ononpeinadiedrt35BOfOnBorn acceptors activate all coinUtity coin switch willnot actLeft acceptor activates. one coin
eSDon caslecounters simultaneously.vate a coin counter if you donotcounter; center and right acceptor
ionon15000 pointshook it up. Both acceptors acti:activate another coin counter. Not
onfred one dubai?ouslycoin door.
ontEasy game difficulty*$>were commumcatins CompanyOffOff— Both acceptors activate 2 count:Utility coin switch will not acti:Lett, enter and right acceptors acti
osfocatrinngai8ers separately.$vate acoin counter, it you do notvate 3 coin counters separately.
oneusn winiearshook it up. Left and right accep-s

_ tors activate 2 coin counters se- $ Manufacturer's suggested settings For pricing of “creits," see Game Price Settings above. “Refer to F. Game Play, for information on game ditficulty Changing toggles 37 erases the high score table. § Manufacturer's suggested settings