Skins Game Kit Templete
Skins Game (1.06) (Midway, 2000) · Document · 2 pages · original scan
TEMPLATE AMENDMENT 16-11146
UNIVERSAL CONVERSION KIT
The assembly illustration (Setup-7) for the Skins Game Universal Conversion Kit should be amended in the following way. When converting a standard cabinet,
y— CARRIAGE BOLTS
PUSHBUTTON (YELLOW) Ly TICK JNTING PLATE
"STICK MOUNTING PLATE — KEYPAD POD
PUSHBUTTON (BLUE)
Pp (UN STUDS ER J’STICK PLATE)
ERLAY
CHANGE CAMERA —/ YSTICK ASSEMBLY
SELECT CLUB/TURN —/ \— NUT 8-32 KEPS (4)
TYPICAL GAME CONVERSION
See other side for Golden Tee information.
TEMPLATE AMENDMENT 16-11146
When converting a Golden Tee™ video game into a Skins Game, please observe the following change to control panel/overlay modification (Setup-7)
1.
aA YN
. Tape template to p Remove plastic overlay. Remove long bolts that hold metal plate to control panel.
Seat joystick moun
asten cover to wal
hole. Cut round ho cut rectangular hole. Remove backing from joystick decal (31-3490) and button decals (31-3489) and Remove artwork and metal plate through top of control panel. Remove trackball from bottom of control panel. Disconnect wires and ground strap. f desired, fill round holes in control panel, sand smooth and paint black. ing plate (04-12875) into recess on top of wood control panel. Remove backing from wallpaper decal (31-3488) and place over control panel and joystick mounting plate. Trim to fit. Place plastic control panel cover (03-9664) on top of wallpaper. Drill holes and paper using existing hardware. Trim cover to fit wood panel. lastic cover, aligning center joystick hole with mounting plate les through plastic, wallpaper, and wood. Deburr holes. Do not
place between wal paper and plastic cover, according to illustration.
- Continue with conversion according to manual.
GOLDEN TEE CONVERSION
Golden Tee Golf is a trademark of Incredible Technologies, Inc. See other side for typical conversion.