Mario Bros Operation Manual (TMA1-UP)
Mario Bros. (US, revision E) (Nintendo of America, 1983) · Manual · 32 pages · 4 sections · original scan
. MODEL NO: TMA1-UP-US ___ OPERATION MANUAL
This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accrdance with ‘he instructions manual, may cause interference to radio com- Munications. It has been tested and found to comply with the limis for a Class A computing device pursuant to Subpart J of Pat 15 of FCC Rules, which are designed to provide reasonable pr¢ection against such interference when operated in a comnercial environment, Operation of this equipment in a residentia area is likely to cause interference in which case the user at he own expense will be required to take whatever measures may be required to correct the interference.
1 Contents [
. Location Setup A. Game Inspection - B.- Game Installation -
- Voltage Selection-
- Power On/Off Switch ----.:--...eee
- Adjustment of Video Monitor ---
- Option Switch Settings ..--:.-.ccc eee eee A. Game Option Settings NO OABON =A
. Bookkeeping and Self test
. Maintenance and Repair -- A. Fuse Replacement °** B. Cleaning Cc. Operation Panel - D. Video Monitor removal E. Game PCB removal
. Radio Frequency Interference -----:-:::ecce teeter eteeeees 14
- Wiring And Connection -:---::cceecieeeeteeeececseeteeeceeseeeseeeneeeeens 15
. Name and Location of each part and Parts List ----
- Location Setup
A. Game Inspection
TMA Display Panel Game Serial Number Label
TMA Front Screen————>> |
TMA Operation Panel_-
Service Door
Cash Door
Shield Cover
Power Transformer
Main Fuse L Power On/Off Switch —————————-—~"_
Power Cord ne LS Shield Cage
Fig. | Game Overview
Check before plugging the game in !
The game“MARIO BROS.” is shipped ready for operation, but a last visual check should be made to insure the final touch of quality control. Please check the following to help us insure that your new game was delivered to you in good condition.
- Check the exterior of the game for shipping damage, dents, chips, or broken parts.
- Remove the screws on the Rear Panel.
- Unlock and open the Rear Panel, as well as the Service Door inspect the interior of the game as follows:
- Check that Plug-in connectors are firmly connected.
- Check that Plug-in integrated circuits on the Game PCB are firmly connected in their sockets.
- Check that all major subassemblies such as the Power Supply, Operation Panel, and Video Monitor are properly mounted.
- Remove the tie-wrap that holds the coiled Power Cord on the inside cabinet wall. Check the cord for any cuts or dents in the insulation.
B. Game Installation
Fig. 2 Installation Requirements
Power : 120 watts Temperature : Oto 38deg.C (32 to 100 deg.F) Humidity : Not over 95% relative Space required: 70(W) X 85(D)cm (27 1/2 & 33 1/2 in.) Height : 172cm (67 1/2 in.)
- Voltage Selection Before plugging in your game, make sure the Terminal Block of the Power Supply is correct for your location’s line voltage.
Power Supply Fuse 4A 125V
Power Supply PCB
Terminal Block US. 90~120V E ~ Outlet through urope 200~240V
Isolation Transformer AC 100V 150VA MAX.
Fig. 3 Power Supply and Voltage Selection
- Power On/Off Switch A Power On/Off Switch is located in the rear of the game at the bottom right side of the cabinet. See Fig. 1.
If the results of the preceding steps are satisfactory, you are ready to plug the game in, and set the Power On/Off Switch to the “On” position.
This game MUST be grounded. Failure to do so may result in destruction of electronic components.
- Adjustment of Video Monitor
From To Game PCB Green Gain __- Video Monitor 6P—600 Video Red Gain A Main PCB Harness Signal PCB
INVERT OUT NON INVERT OUT
In case of TMA-UP, Plug in here!
This Signal PCB is. only attached to. TPPU-20-00
:Video Monitor [32 Type] 20-EZV (R-C),
V-SIZE
V-HOLD
H-CENT
BRIGHT
SOUND VOLUME
- H-HOLO &
Fuse 44 (Slow Blow) ed
© ol
Video Monitor Main PCB
Fuse 0.3A (Midget Type}
Fig. 4 Video Monitor
Do not touch the inside of the Video Monitor. It contains many parts supplied with high voltage.
- Option Switch Settings
Option Toggle Switch ig mounted on the Game PCB.
TMA1-CPU PCB %
Fig. 5 Option Toggle Switch
A. Game Option Settings
TOGGLE(SWI) SETTINGS
B/]C|]D]E|F/G
NUMBER OF
MARIO/LUIGI
PER GAME
COIN/CREDIT
1/1
1/2
V3
EXTRA —— 20,000PTS.
MARIO/ . LUIGI 30,000PTS,
AT 40,000PTS.
NO EXTRA
DIFFICULTY EASY |1) | a
HARD ‘41
All the Option Switch Settings MUST be done with Power Off.
- Bookkeeping and Self-Test
- Entry Press Service Switch and hold it down until Menu of Test Mode displays on the Video Monitor as follows.
Test Mode
BOOKKEEPING DISTRIBUTIONS FREE PLAY SELF-TEST & MONITOR ADJUSTMENT RETURN TO GAME MODE RON
- Selection of Test A flashing Shellcreeper points to the Test. Momentarily depressing Service Switch will step to next Test. When the shellcreeper is pointing to the desired Test, the details of the Test can be displayed by pressing the Service Switch and holding it down until the details appear on the Video Monitor. (Except “RETURN TO GAME MODE” )
- Back to Menu of Test Mode You can recall Menu of Test Mode by holding down Service Switch until it re-appears.
- Back to Game Mode When the shellcreeper is pointing to “RETURN TO GAME MODE”, you will be able to return to Game Mode (Demonstration Game) by holding down Service Switch until it re-appears.
(WARNING) TEST MODE will go back to Game Mode automatically if you do not push a switch or button or move the controller within a few minutes.
A. Bookkeeping Distributions:
- Playtime distributions and number of plays per distribution range.
- Score distributions and number of plays per distribution range.
- Number of One (1) player games and playtimes per distribution range.
- Number of Two (2) player games and playtimes per distribution range.
- To clear all distributions, press either start button.
- % Bookkeeping distribution system will not function when game is set in Free Play Mode.
B. Free-Play Pressing either start button will set or clear “FREE PLAY” mode.
C. Self-Test & Monitor Adjustment Pressing either start button will step to the next Test. (C-1) RAM and ROM Test The result of RAM and ROM Test will be displayed on the Video Monitor as follows.
Example RAM ROM TEST
RAM ROM CHECKSUM TA OK 7C OF 7B OK 7D : (OK: Passed)
te : (NG: Failed)
4 4 RAM location ROM location on the PCB on the PCB
(C-2) CRT Test Color Bar and Marks on four Corners and center of screen are displayed on the Video Monitor one after another.
(C-3) SOUND TEST You will hear the various sounds one after another.
(C-4) SWITCH TEST The result of the switch condition will be displayed on the Video Monitor when you press each of the switches or move the controllers. (2-Way Controllers, Jump Switches, 1-Player Switch, 2-Player Switch and Coin Switches.)
(C-5) End of Self-Test.
- Maintenance and Repair
A. Fuse Replacement This game contains 4 fuses. Replace fuses only with the same type as listed below.
Fig 7 Specification of Fuses
- Main fuse U.S. : 5A 100V ( 90~120V) Europe : 2A 250V (200 ~ 240V) See Fig. 1
- Power Supply fuse 4A 100V See Fig. 3
- Video Monitor fuse 4A 100V 0.3A 100V See Fig. 4
B. Cleaning The exterior of the game, all metal parts and all plastic parts can be cleaned with a nonabrasive cleanser. You should be careful when cleaning the glass or plastic parts. A dry cloth may cause scratches which will result in a foggy appearance.
C. Operation Panel
- Operation Panel Removal Before repairing or replacing any switches or 2 way Controllers on the Operation Panel, unplug the game. Open the Service Door, which are reach througn the opening, and unlock the Clamps, located at each end onthe underside of the Operation Panel. See Fig. 10.
- Micro-switch Replacement Whenever you replace any micro-switch on the Operation Panel, a switch gap adjustment is needed as shown in Fig. 8. Also, see Fig. 15 for layout of Control Panel Switches.
| Switch Button Assy.
Micro-switch Gap:0.2~0.5 mm (1/128 ~ 5/256 inch)
Fig. 8 Switch gap adjustment
- Lubrication for 2 way Controller To maintain the 2 way Controller in good condition, lubricate the pillow balls and 2 way Guide Plate approx. every 3 months. See Fig. 9.
Lubricate here//
Fig. 9 Lubrication points
a
D. Front Screen & Video Monitor Removal
- Front Screen Removal First remove the Operation Panel and then pull the Front Screen toward you.
Front / Screen
~*~ Operation Panel Assy. Clamp
Service Door
Fig. 10 Front Screen and Operation Panel Assy, removal
- Video Monitor Removal If you need to remove the Video Monitor, follow the instructions listed below. But the following procedure should only be performed by an experienced service technician.
It is recommended the game be left unplugged for at least one hour before removing the Video Monitor. This will probably discharge the CRT, but extreme caution is still necessary.
- Make sure game is unplugged !!
- Open the rear panel and remove the Front Screen.
- Unplug all the harnesses and cables from the Video Monitor.
- Standing at the front opening of the game, remove the four mounting bolts and flat washers. See Fig. 11.
- Carefully lift the Video Monitor and pull toward you.
Use extreme caution and do not touch electrical parts of the yoke area with your hands or with any metal object in your hands.
Remove the four mounting bolts and flat washers
Fig. || Video Monitor removal
E. Game PCB Removal
- Make sure the game is unplugged !!
- Open the rear panel.
- Remove the 44-pin edge connector from the upper side of the 044-FCC PCB on the Shield Cover.
- Locate the 6 Phillips-head Screws on the Shield Cover. Remove and save these Screws.
- Remove the Game PCB from the Shield Cage by carefully sliding it straight out of the wooden PCB retainer.
A reversed connector will damage your PCB! If the connectors don't slip on easily, don’t force them!
044-FCC PCB
6 Phillips-head Screws a
Shield Cage
Shield Cover
Fig. 12 Game PCB removal
cy Interference (RF) Radio Frequ
In order to protect against the RFI radiated from this equipment, please comply with the following.
- Do not use non-Nintendo parts!
- Do not modify your game circuitry !
- Do not modify the wiring harness and connections !
- Connect this game only to a grounded 3-wire outlet.
- After servicing the Game PCB, shut the Shield Cover completely with the Screws. See Fig. 12.
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
Power Tronstormer
Power Cord Lan 12P-030 Pr eas
| bow TT) sy | +: | 5 | 120 240, | H | |
| ses fz] -5v | z | ‘AC 100¥ | i | 100 0F22¢ | 7 |
| “orange. | oa AEs | 1.64. | 1 ] orl | —EEz | |
| webb) | 2 GG | ss | 20.7005, | oe 7 | |
| se TsTs] Guo Pou | é | 200¥- 240 34! | |||
| a] xe | r | f | |||
| — fafa} «sy | 1 | ' Power Switch Assy | ' | ||
| Bisok fof] sv | bonne eee eee | iii |
Mil vn zzeezeee SBBSEGEDEDSE apeEaRoee Ebest] Bel FFEE ST SSS A 904 caro BOBDGRHE
| Tay dae | etietetetsbht | OO} cates |
sere! | 380 00
| yen | alel slg sje] st ola | Es | 3 | |
| a eu Fay | yellow | ‘eran 242 | ||
| z ‘GND. 7 | o | e[7fafsfelsqi {2 [a | FE] | i |
| z 7 a | fr lefstelstrt2]s) | fe | 1 | Dy |
| [sv i | ete CET ae | ; | 2 | S |
| [re | a | oom | | ||
| ei | mange | SHS] oiace | ' | |
| [57 oe | raha] | 1 | ||
| re | aig | ' |
7 [cont a Breen| PAZ etton gree via | Preay | et ee omattine |
| a | rae | Soc] | "open Pere |
| opie | ES | SPR SW Sones |
z rte gp bia rr aD ae caper 7 att
| z | 4 | SE | pte | | ||
| 7F ump | [els] “8 | -. | : | ||
| : | ae | t | |||
| : | of | : | |||
| {= | at | : | |||
| ia | raf] | 1 | |||
| Stasis | ne | 4 | |||
| 4s | aoe ree On a | z | 7 | ||
| ef Caner | nae ane | siz | H | ||
| rae | asf arse fafa] vB | 35 | ' | ||
| os | a | fe | ste] oxo | SE | ' |
| rae | vive Pepe} owe Tete] svwe | fa | ideo Monitor |! | ||
| 6-800 | : Vises Monitor | tem oce | 1 | |||
| Sonica ers | : | Hapa] tee |
: sbi} —pal we | |
| sii wins | aa | HA soto | SERF-ERy ss |
FE “ovo 2REE EE Ste
| sods | ats | 3lefe-efel sme |
| gy aay | 2-400 | : |
| TEE | EPR ppLTs | TT |
7 dt Tyee Ha oa lhe
| 5 | gfe | 2 |
1-40 Sorter ores
pte0 ye-s0o,sp-ano SCE [7
Fig. 13 Front View of Game Cabinet
- Name and Location of each part and Parts List
PARTS LIST: TMA1-UP Game Cabinet Assembly
ITEM PART No. DESCRIPTION
| 1 | TMAU-13-03 | Body (Wooden Game Cabinet) |
| 2 | TKGU-01-29 | Fluorescent Lamp Assy. |
| 3 | TMAU-1 1-26 | Name Plate Retainer 668L |
| 4 | TMAU-12-12 | TMA-US Display Panel (Name Plate) |
| 5 | TMAU-11-11 | Center Trim 668L |
| 6 | TPPU-20-00 | Video Monitor [82 Type] 20-EZV (R-C) |
or TKGU-20-00 Video Monitor [31 Type] 20-EZV (R-B)
| 7 | TMAU-13-12 | Blind Cardboard (337W) |
| 8 | TMAU-13-11 | 044 Black Cardboard Bezel |
| 9 | TMAU-12-13 | TMA-US Front Screen |
| 10 | TMAU-12-11 | TMA-US Operation Panel (Panel Only) |
| 11 | TKGU-01-49 | Speaker Grill |
| 12 | TKGU-01-43 | Speaker |
| 13 | TKGU-01-31 | Operation Panel Clamp A (2 Required) |
| 14 | TMAU-11-20 | CS Plate 120W |
| 15 | TKGU-01-33 | Service Switch (with Button) |
| 16 | TKGU-01-11 | Game Counter |
| 17 | TMAU-14-17 | Service Door ADD-S2: Order By Currency |
| 18 | TMA-14-18 | Coin Selector: Order By Currency |
| 19 | TMAU-34-17 | Lamp BA-9S 6.3V 0.15A |
| 20 | TMAU-34-16 | Lamp Socket BA-9S |
| 21 | TMAU-34-19 | Micro-switch ADD D2MC-5F1 |
| 22 | TMAU-14-12 | Door Lock |
| 23 | TMAU-11-14 | Cam B31R |
| 24 | TMAU-14-11 | Cash Door ADD |
| 25 | TMAU-11-27 | Cash Box ADD |
Rear View of Game Cabinet Fig. 14
PARTS LIST: TMA1-UP Game Cabinet Assembly ITEM PART No. DESCRIPTION
| 1 | TKGU-01-61 | Vent Grill |
| 2 | TMAU-13-15 | Rear Panel |
| 3 | TMAU-1 4-14 | Lock K6510 |
| 4 | TMAU-11-15 | Cam A |
| 5 | TMAU-30-12 | Power On/Off Switch Assy. (For 90~120V) |
TMAU-30-13 Power On/Off Switch Assy. (For 200~240V) TMAU-22-01 TMA1-VIDEO Complete PCB Assembly TMAU-21-01 TMA1-CPU Complete PCB Assembly TPPU-01-01-11 Shield Cover TMAU-23-01 044-FCC Complete PCB Assembly TKGU-01-08 Power Cord: Order By Voltage & Plug Type woe nnn nin iii ODNMAANHAPAWNHN-DOAND TKGU-01-01-02 TKGU-09-01-02 DJRU-18-01 DJRU-19-01-01 DJRU-09-01-01 TKGU-09-01-03 TKGU-19-01-03 TKGU-01-30 TPPU-01-01-10 TKGU-01-65 TKGU-01-10 Transformer Base Outlet Through Isolation Transformer PP-7B-Complete Power Supply Assembly PT-821B Power Transformer (For 90~120V) PT-8A Power Transformer (For 200~240V) Terminal Block 6-Position Type Terminal Block 4-Position Type Caster (2 Required) Shield Cage Strain Relief Bushing Plate Strain Relief Bushing
Operation Panel Assembly Fig. 15
PARTS LIST: TMA1-UP Operation Panel Assembly
ITEM PART No. DESCRIPTION
| 1 | TMAU-14-16 | Complete 2 way Controller Assy. |
| 2 | TMAU-11-17 | 2 way Guide Plate |
| 3 | TKGU-23-23 | E Ring 4 |
| 4 | TKGU-23-21 | Switch Collar |
| 5 | TKGU-23-22 | Lever Spring |
| 6 | TKGU-23-20 | Spring Stopper |
| 7 | TKGU-23-13 | Micro-switch VL12L (Bent) (2 Required) |
| 8 | TKGU-23-17 | Switch Spacer (2 Required) |
| 9 | TKGU-23-16 | Bearing Bracket |
| 10 | TMAU-12-15 | Lever Plate |
| 11 | TMAU-12-14 | Control Knob Plate 28D |
| 12 | TMAU-12-16 | Controller Knob Collar 8L |
| 13 | TMAU-11-18 | Knob with Shaft 80.5L |
| 14 | TKGU-23-34 | Pal Nut (4 Required) |
| 15 | TKGU-23-26 | Nut Plate (4 Required) |
| 16 | TKGU-23-12 | Switch Button Bracket (4 Required) |
| 17 | TMAU-34-18 | Micro-switch VL12L (Straight) (4 Required) |
| 18 | TMAU-12-18 | Collar 34x 28 15H |
| 19 | TMAU-11-19 | Operation Panel Fastener B 38W |
| 20 | TMAU-1 2-17 | Black Sponge 2x10X660L |
| 21 | TMAU-12-11 | TMA-US Operation Panel |
| 22 | TKGU-23-31 | Blue Button Assy. (For 1P, 2P) |
| 23 | TKGU-23-32 | Orange Button Assy. (For Jump) |
PARTS LIST: TMA1-UP Wiring Harness
PART No. DESCRIPTION See Fig. 16 TMAU-41-16 UP 44P-044 Edge Connecting Harness TMAU-41-15 44P 044-FCC PCB Harness TPPU-93-02 2P-400 Audio Harness (400mm) TPPU-93-07 6P-600 Video Harness (600mm) TMAU-41-12 3P-500 Game Counter Harness (500mm) TMAU-41-13 4P-800 Service Switch Harness (800mm) TMAU-41-14 4P-600 WL Coin Harness (600mm) TKGU-13-06 2P Speaker TV Harness [2P-370] (370mm) TKGU-13-17 2P Speaker Harness [2P-860] (860mm) DJRT-89-08 9P-030 Power Harness (9P-9P Connector) DJRT-89-09 12P-030 Power Harness (10P-12P Connector) TMAU-41-11 UP 221 Type 15P Operation Panel Harness DJRU-13-12 50P Flat Cable [50P-40] TPPU-93-11 10P-130 Power Harness (130mm)
PARTS LIST: TPP2-CPU PCB Assembly
No. DESCRIPTION (Reference Designations and Locations) TMAU-21-01 TMA1-CPU Complete PCB Assembly
| TMAU-21-11 | Z80A Microprocessor | (5E) |
TMAU-21-12 Z80ADMA DMA Controller (5D) TMAU-21-13 3191 (8039) Microprocessor (5L) TMAU-21-14 2732 4K byte EPROM 350ns (6K) TMAU-21-15 2764 8K byte EPROM 450ns TMA1-C-7D (7D) TMAU-21-16 2764 8K byte EPROM 450ns TMA1-C-7E 7E) TMAU-21-17 2764 8K byte EPROM 450ns TMA1-C-7F 7F) TMAU-21-18 6116 16K byte C-MOS RAM 200ns 7A, 7B) ( ( ( TMAU-21-19 LM3900 Audio Amplifier (3M) ( ( ( TMAU-21-20 4020B C-MOS Buffer 3H)
| TMAU-21-21 | TBP28S42N 512 x 8bit Bipolar ROM | 4P) |
TMAU-21-22 TBP18S030 32x 8bit Bipolar ROM 5B) TMAU-21-23. 74HC374 C-MOS Octal 3 State D-Type Flip Flop (3K)
TMAU-21-24 74LS00 Quad 2-Input NAND (4H, 7K) TMAU-21-25 74LS04 Hex Inverter (1H, 3E, 4J, 7L) TMAU-21-26 74LS08 Quad 2-Input AND (2K) TMAU-21-27 74LS11 Triple 3-Input AND (3J) TMAU-21-28 74LS27 Triple 3-Input NOR (2B) TMAU-21-29 74LS32 Quad D Type Flip-Flop (2A) TMAU-21-30 74LS74 Dual D Type Flip-Flop (3D, 4D)
| TMAU-21-31 | 74LS86 Quad 2-Input EXOR | ~ (1K) |
TMAU-21-32 74LS123 Dual Re-triggerable Single Shot (2H, 2D, 4L) TMAU-21-33 74LS138 3 To 8 Demultiplexer (3A, 3B, 3C, 4B, 4C) TMAU-21-34 74LS139 Dual 2 To 4 Line Decoder (4A) TMAU-21-35 74LS240 Octal Inverted Buffer (1L, 1M, 1N) TMAU-21-36 74LS244 Octal 3 State Bus Buffer (5H, 6H) TMAU-21-37. 74LS245 Octal Bus Transceiver (7H) TMAU-21-38 74LS259 8-bit Addressable Latches (2L, 7M) TMAU-21-39 74LS367 Hex Bus Driver (6A, 6B, 6C) TMAU-21-40 74LS373 Octal 3-State D-Latches (6J)
| TMAU-21-41 | 74LS374 Octal 3-State D-Type Flip Flop | (7J) |
TMAU-21-42 74LS629 Voltage Control Oscillators (1d, 2J, 4K)
TMAU-21-43 2SD592 Silicon PNP Transistor (Q2, Q3) TMAU-21-44 2SC828 Silicon NPN Transistor (Q8, Q5, Q6, Q1, Q4) TMAU-21-45 2SA564 Silicon PNP Transistor (Q7, QQ) TMAU-21-46 2SC1815 Silicon NPN Transistor (Q10)
TMAU-21-47 LS953 Diode (D2, D5, D6, D8, D7, D9,D10) TMAU-21-48 WO3B Diode (D1, D3, D4, D11)
TMAU-21-49 68 Ohm 1/4W +5% Resistor (R10, R29, R30, R31) TMAU-21-50 100 Ohm 1/4W +5% Resistor (R55, R57, R53)
| TMAU-21-51. | 150 Ohm 1/4W +5% Resistor | (R62) |
No. DESCRIPTION (Reference Designations and Locations) TMAU-21-52 200 Ohm 1/4W +5% Resistor (R11) TMAU-21-53 220 Ohm 1/4W +5% Resistor (R44, R47, R50) TMAU-21-54 330 Ohm 1/4W +5% Resistor (R13,R8,R9,R26,R27,R28) TMAU-21-55 470 Ohm 1/4W +5% Resistor (R46, R48, R51,R54, R56) TMAU-21-56 510 Ohm 1/4W +5% Resistor (R59) TMAU-21-57. 560 Ohm 1/4W +5% Resistor (R32, R33) TMAU-21-58 680 Ohm 1/4W +5% Resistor (R4, R58) TMAU-21-59 1K Ohm 1/4W +5% Resistor (R22,R24,R45,R49,R52,R63,R66) TMAU-21-60 2K Ohm 1/4W +5% Resistor (R12) TMAU-21-61 2.2K Ohm 1/4W +5% Resistor (R2) TMAU-21-62 3.3K Ohm 1/4W +5% Resistor (R3) TMAU-21-63 4.7K Ohm 1/4W +5% Resistor (R6, R7) TMAU-21-64 10K Ohm 1/4W +5% Resistor (R1, R23, R25, R60, R65, R67, R68, R69) TMAU-21-65 12K Ohm 1/4W +5% Resistor (R14) TMAU-21-66 20K Ohm 1/4W +5% Resistor (R64, R17, R18) TMAU-21-67 22K Ohm 1/4W +5% Resistor (R19, R20, R40) TMAU-21-68 33K Ohm 1/4W +5% Resistor (R16, R15) TMAU-21-69 43K Ohm 1/4W +5% Resistor (R42) TMAU-21-70 47K Ohm 1/4W +5% Resistor (R61) TMAU-21-71 100K Ohm 1/4W +5% Resistor (R43, R5, R41) TMAU-21-72 360K Ohm 1/4W +5% Resistor (R38) TMAU-21-73 750K Ohm 1/4W +5% Resistor (R37,R39) TMAU-21-74. 1M Ohm 1/4W +5% Resistor (R35) TMAU-21-75 1.8M Ohm 1/4W +5% Resistor (R36, R21) TMAU-21-76 2M Ohm 1/4W +5% Resistor (R34)
TMAU-21-77 Octal 1K Ohm Series Resistor Array (RM3, RM6) TMAU-21-78 Octal 4.7K Ohm Series Resistor Array (RM7) TMAU-21-79 Hex 68 Ohm Series Registor Array (RM1,RM2,RM4,RM5)
TMAU-21-80 Rader Matrix 10K Ohmx 20K Ohm (MXR1)
TMAU-21-81 30PF 50V Ceramic-Disc Capacitor (C45, C46) TMAU-21-82 0.01uF 50V Ceramic-Disc Capacitor (C7,C8,C12,C60~C91)
TMAU-21-83 100P 50V Styro! Capacitor (C18, C30)
TMAU-21-84 0.0039uF 50V Film Capacitor (C6) TMAU-21-85 0.0047uF 50V Film Capacitor (C39) TMAU-21-86 0.0068uF 50V Film Capacitor (C16) TMAU-21-87 0.022uF 50V Film Capacitor (C17, C40, C31) TMAU-21-88 0.039uF 50V Film Capacitor (C5) TMAU-21-89 0.14F 50V Film Capacitor (C28)
TMAU-21-90 1yF S50V Al. Electrolytic Radial Capacitor (C32, C29) TMAU-21-91 3.3uF 50V Al. Electrolytic Radial Capacitor (C43, C44) TMAU-21-92 10uF 50V Al. Electrolytic Radial Capacitor (C9, C10, C19~C27) (C33~C37)
No. DESCRIPTION (Reference Designations and Locations)
TMAU-21-93 47uF 16V Al. Electrolytic Axial Capacitor (C13) TMAU-21-94 100uF 16V Al. Electrolytic Axial Capacitor (C11, C38) TMAU-21-95 470yF 16V Al. Electrolytic Axial Capacitor (C2,C54~C56)
TMAU-21-96 1yF 10V Tantalum Radial Capacitor (C50) TMAU-21-97 4.7uF 10V Tantalum Radial Capacitor (C4,C14,C15,C41) TMAU-21-98 10uF 10V Tantalum Radial Capacitor (C1, C3)
TMAU-21-99 8.00MHz Crystal (X1) TMAU-21-100 11.00MHz Crystal (X2)
TMAU-21-101 NC5892-01 MINI BUS BAR TMAU-21-102 NC2158-07 MINI BUS BAR
TMAU-21-103 16Pin Dip IC Socket (5B) TMAU-21-104 20Pin Dip IC Socket (4P) TMAU-21-105 24Pin Dip IC Socket (6K) TMAU-21-106 28Pin Dip IC Socket (7D, 7E, 7F) TMAU-21-107 40Pin Dip IC Socket (5E, 5L)
TMAU-21-108 8-Station Single-Throw DIP Bit Switch (SW1)
TMAU-21-109 50Pin Flat Cable Header (P1) TMAU-21-110 10Pin Connector Receptacle (P2)
TMAU-21-111 Battery Case TYPE32-4 UM3~x 2) TMAU-21-112 Philips Head Machine Screw (With Spring Washer M2.6x8) TMAU-21-113 Flat Washer M2.6 TMAU-21-114 Nut Plate M2.6 Beaded Wire Tie
TMAU-21-115 1314 Ferrite Beads (FC1~FCQ)
TMAU-21-116 Dry Battery UM-3
PARTS LIST: TMA1-VIDEO PCB Assembly
No. DESCRIPTION (Reference Designations and Locations) TMAU-22-01 TMA1-VIDEO Complete PCB Assembly TMAU-22-11 2732 4K byte EPROM 250ns TMA-C-3F (3F) TMAU-22-12 2732 4K byte EPROM 250ns TMA-C-3J (3J) TMAU-22-13 2732 4K byte EPROM 250ns TMA-C-7M (7M) TMAU-22-14 2732 4K byte EPROM 250ns TMA-C-7N (7N) TMAU-22-15 2732 4K byte EPROM 250ns TMA-C-7P (7P) TMAU-22-16 2732 4K byte EPROM 250ns TMA-C-7S (7S) TMAU-22-17 2732 4K byte EPROM 250ns TMA-C-7T (7T) TMAU-22-18 2732 4K byte EPROM 250ns TMA-C-7U (7U)
No.
TMAU-22-19 TMAU-22-20 TMAU-22-21 TMAU-22-22 TMAU-22-23 TMAU-22-24 TMAU-22-25 TMAU-22-26 TMAU-22-27
TMAU-21-24 TMAU-22-28 TMAU-21-25 TMAU-21-26 TMAU-22-29 TMAU-22-30 TMAU-21-28 TMAU-22-31 TMAU-21-29 TMAU-21-30 TMAU-21-31
TMAU-22-32 TMAU-21-32 TMAU-21-34 TMAU-22-33
TMAU-22-34
TMAU-22-35
TMAU-22-36 TMAU-22-37 TMAU-21-35 TMAU-21-37 TMAU-22-38 TMAU-22-39 TMAU-22-40 TMAU-21-39 TMAU-21-40 TMAU-22-41
TMAU-22-42
TMAU-21-50 TMAU-22-43 TMAU-21-56 TMAU-21-59 TMAU-21-61 TMAU-21-63 DESCRIPTION (Reference Designations) 2114 1Kx4 bit RAM 200ns (3D, 3E) 2148 1Kx4 bit RAM 55ns (8B, 8C) 93419 649 bit Bipolar RAM 70ns (8E) 7074 2564 bit ECL RAM 10ns (3P, 3R) 10124 Quadruple TTL-TO-ECL Translators (4P,4R, 5P, 5R) 10125 Quadruple ECL-TO-TTL Translators (3S, 3T) 74S04 Shottky Hex Inverter (2U) 74832 Shottky Quad 2-Input OR (3U) 74S74 Shottky Dual D-Type Flip-Flop (2T)
74LS00 Quad 2-Input NAND (2M, 5H) 74LS02 Quad 2-Input NOR (1K, 5E, 5U) 74LS04 Hex Inverter (1R, 4E) 74LS08 Quad 2-Input AND (8A) 74LS10 Triple 3-Input NAND (5L) 74LS20 Dual 4-Input NAND (4H, 5F, 6P) 74LS27 Triple 3-Input NOR (6S) 74LS30 8-Input NAND (4J) 74LS32 Quad D-Type Flip-Flop (4L) 74LS74 Dual D-Type Flip-Flop (1L,1M,4F) 74LS86 Quad 2-Input EXOR (1B, 1D, 2D, 3A, 3B, 3C) (4N, 5N, 6H, 6N, 7H) 74LS109 Dual J-K Flip-Flop (3M) 74LS123 Dual Retriggerable Single Shot ( 74LS139 Dual 2-TO-4 Line Decocler (4K) 1F, 1H)
74LS157 Quad 2-To-1 Line Data Selector
74LS161 (2K, 4B, 4C, 4D, 4S, 4U, 5, 5S5T, 6C, 6D, 7B, 8M, 8N) Synchronous 4 bit Counter (1C, 1S, 1T, 2S, 5J, 5K, 5C, 5D, 1A) 74LS163 Synchronous Presettable 4 bit Counter With Clear (4M, 5M) 74LS174 Hex D-Type Flip-Flop (6T, 6U) 74LS175 Quad D-Type Flip-Flop (3K, 6J, 7J) 74LS240 Octal Inverted Buffer (8H) 74LS245 Octal Bus Transceiver (2F, 7C) 74LS273 Octal D-Type Flip-Flop (6M, 7D, 8D,8JJ) 74LS283 4 bit Full Adder (6E, 6F, 6K, 6L, 7E, 7F, 7K, 7L) 74LS299 8 bit Shift Registor (2H, 2J, 8N, 8P, 8R,8S, 8T,8U) 74LS367 Hex Bus Driver 74LS373 Octal 3-State D-Latches 74LS377 Octal D-Type Flip-Flop
0 Ohm 1/4W +5% Registor
100 Ohm 1/4W +5% Registor 390 Ohm 1/4W+5% Registor 510 Ohm 1/4W +5% Registor 1K Ohm 1/4W +5% Registor 2.2K Ohm 1/4W +5% Registor 4.7K Ohm 1/4W +5% Registor (1P, 2P) (4T, 8K) (1E, 6R)
(R10)
(RS) (R7) (R6, R14) (R13, R11) (R8,R9) (R2, R4)
No. DESCRIPTION (Reference Designations and Locations) TMAU-21-67 22K Ohm 1/4W +5% Resistor - (R1) TMAU-22-44 27K Ohm 1/4W +5% Resistor (R3)
TMAU-21-77 Octal 1K Ohm Series Resistor Array (RM4) TMAU-22-45 Octal 510 Ohm Series Resistor Array (RM1,RM2,RM3,RM5)
TMAU-22-46 51PF 50V Ceramic-Disc Capacitor (C5, C8) TMAU-22-47 68PF 50V Ceramic-Disc Capacitor (C19, C11) TMAU-22-48 150PF 50V Ceramic-Disc Capacitor (C10) TMAU-22-49 220PF 50V Ceramic-Disc Capacitor (C15, C1) TMAU-22-50 330PF 50V Ceramic-Disc Capacitor (C9) TMAU-21-82 0.01u4F 50V Ceramic-Disc Capacitor (C20~C51) TMAU-22-51 1000PF 50V Styro! Capacitor (C2) TMAU-21-87 0.022uF 50V Film Capacitor (C4) TMAU-21-89 0.1uF 50V Film Capacitor (C3)
TMAU-21-95 470yF 16V Al. Electrolytic Axial Capacitor (C7, C13, C16) TMAU-22-52 24.00MHz Crystal (X1) TMAU-22-53 NC5854-00 MINI BUS BAR TMAU-22-54 NC5870-03 MINI BUS BAR TMAU-22-55 NC5872-08 MINI BUS BAR
TMAU-21-105 24Pin DIP IC Socket (SF, 3JU, 7M, 7N, 7P, 7S, 7T, 7U) TMAU-21-109 50Pin Flat Cable Header (P1) TMAU-21-110 10Pin Connector Receptacte (P2) TMAU-22-56 30K Ohm VR (VR1, VR2) TMAU-22-57 GP-7 Ferrite Beads (FC1~FC16)
PARTS LIST: TMA1-FCC PCB Assembly
No. DESCRIPTION (Reference Designations and Locations)
TMAU-23-01 TMA1-FCC Complete PCB Assembly TMAU-23-11 26Pin Straight Connector TMAU-23-12 0.14F 12V Ceramic Disc-Capacitor TMAU-21-82 0.014F 50V Ceramic Disc-Capacitor TMAU-23-13 0.0014F 50V Ceramic Disc-Capacitor TMAU-22-57 GP-7 Ferrite Beads
PARTS LIST: PP-7B Power Supply Assembly
No. DESCRIPTION (Reference Designations and Locations) DJR-18-01 (PP7B) Power P.C. Board Complete Set DJR-18-02 2SC2555 Silicon NPN Transistor (TR1) DJR-18-03 2SA817 Silicon PNP Transistor (TR2, TR4) DJR-18-04 2SC2535 Silicon NPN Transistor (TR3) DJR-18-05 2SA1015 Silicon PNP Transistor (TRS) DJR-18-06 CTV-2S Fast Recovery Center Tap Diode (D4) DJR-18-07 CTB33S Schottky Diode (D5, D9)
No.
DJR-18-08 DJR-18-09
DJR-18-10 DJR-18-11 DJR-18-12 DJR-18-13 DJR-18-14 DJR-18-15 DJR-18-16 DJR-18-17 DJR-18-18 DJR-18-19 DJR-18-20
DJR-18-21 DJR-18-22 DJR-18-23 DJR DJR DJR-18-26 R R DJ DJ
DJR-1 DJR-1 DJR-1 DJR-1 DJR-18-33 DJR-1 DJR-1 DJR-1
DJ DJ
DJR-18-53 DESCRIPTION (Reference Designations and Locations)
S4VB40 4A/400VW_ Silicon Rectifier Diode (BR) 1B4B41 Silicon Rectifier Diode (BR2)
3D-1001 Hybrid IC (IC1, IC2) 7824 3 Terminal Regulator (IC3) 7812 3 Terminal Regulator (IC4) 5P4M Thyristors (SCR) O3PO05M Thyristors (SCR2) 1$954 Diode (D1, D6, D10, D11) 10DF-4 Diode (D2, D3, D7, D8) PC614 Photo Coupler (IC5) 05Z 5.6V Zener Diode (ZD1) 05Z 5.1L Zener Diode (ZD2) 05Z5.6Z Zener Diode (05Z)
470P/2KV DE070B471K2K Ceramic Capacitor (C1, C2, C9) 0.142 F/50V Ceramic Capacitor (C29) 0.047 uF/630VW Film Capacitor MDD2J473M (C3, C4, C5) 0.01uF/50V Film Capacitor (C8, C17) 1000PF/50V FilmCapacitor (C14, C26) 1000uF/50V Al. Electrolytic Capacitor (C10) ( 47pF/35V Al. Electrolytic Capacitor 11,013) 47 uF/16V Al. Electrolytic Capacitor (C12, C18, C19, C20, C30, C31, C32, C36, C37, C38) 3300 uF/10V Al. Electrolytic Capacitor (C27, C28, C15, C16) 100uF/25V Al. Electrolytic Capacitor (C23, C33) 10uF/16V Al. Electrolytic Capacitor (C22, C24, C25, C34, C35) 330uF/200V Al. Electrolytic Capacitor (C6, C7) 1000 uF/25V Al. Electrolytic Capacitor (C21) 20 Ohm 2W Resistor (Coil Winding) (R1) 1K Ohm 1/4W +5% Resistor (R2, R12, R14, R15, R18, R22) 51 Ohm 1/4W+5% +5% Resistor (R83, R4,R11, R15, R17, R19, R21, R23) 12 Ohm 1/2W +5% Resistor (R5, R8, R20, R24, R6, R26) 470 Ohm 1/4W +5% Resistor (R10) 22 Ohm 1/2W+5% Resistor (R13) 20K Ohm 1/2W +5% Resistor (R16, R25) 100 Ohm 1/2W +5% Resistor (R27) 20 Ohm 5W Resistor (R9) 510 Ohm 3W Resistor (Metal Oxide) (R7) 50K Ohm GFO6P Variable Resistor (VR2, VR4) 2K Ohm GFO6P Variable Resistor (VR1, VR3) 5m Ohm Shunt Resistor (SH1, SH2) SC-02 SC Coil (L1) 100mH 5A SF Coil (L4, L5) 800mH 2A SF Coil (L2, L3) 3D-0097 EC-35 Type Oscillator Trans (T1) 3D-0097 EI-35 Type Oscillator Trans (72) 3D-1000 EE-16 Type Oscillator Trans (T3, T4) 4A-125V Fuse FGMB4A-125V NR Type (F)
©1983 Nintendo of America Inc. Printed in Japan