CATHODE RAY TOMES

Cruisn Exotica Conversion Kit

Cruis'n Exotica (version 2.4) (Midway, 1999) · Kit Manual · 56 pages · 9 sections · original scan

Page 1

SEPTEMBER 2000 MIDWAY 16-44072-101

CONVERSION KIT

INSTALLATION MANUAL

FOR ALL CABINET STYLES OF GRUIS’N USA™,

CRuIS’N WORLD™ AND OFFROAD GHALLENGE™

VIDEO GAMES

MANUAL INGLUDES INSTALLATION * OPERATION * ADJUSTMENTS * TROUBLESHOOTING

The manufacturer intends that this game is to be operated for amusement purposes only and not in contravention of any federal, state or local law or regulation of the United States or any foreign country governing gaming devices. All operators of this game are responsible for its operation in accordance with such laws and regulations. The manufacturer's factory settings for this game may require adjustment in order to comply with laws applicable in an operator's specific jurisdiction. It is the operator's responsibility to determine whether adjustments are necessary and, if they are, to make the appropriate adjustments prior to operating the amusement game.

MIDWAY AMUSEMENT GAMES, LLC 3401 NORTH CALIFORNIA AVENUE CHICAGO, ILLINOIS 60618 USA http://www.midwaygames.com

Page 2

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 3

CHAPTER ONE

INSTALLATION & OPERATION

Games, LLC reserves the right to make improvements in equipment function, design, or NOTICE: Information in this manual may change without notice. Midway Amusement cer components as progress in engineering or manufacturing methods may warrant.

Cruis’N Exotica™

Page 4

CHAPTER 1 INSTALLATION

SAFETY INSTRUCTIONS The following safety instructions apply to operators and service personnel. Read these instructions before servicing or preparing the Video Game Machine (VGM) for play. Other safety instructions appear throughout this manual.

DEFINITIONS OF SAFETY TERMS + DANGER indicates an imminent hazard. If you fail to avoid this hazard, it WILL cause death or serious injury. + WARNING indicates a potential hazard. If you fail to avoid this hazard, it COULD cause death or serious injury. + CAUTION indicates a potential hazard. If you fail to avoid this hazard, it MAY cause minor or moderate injury. CAUTION also alerts you about unsafe practices. + NOTE indicates information of special importance.

The VGM contains glass and fragile electronic devices. Use appropriate care when transporting. Avoid rough handling when moving the cabinet. Do not move with the power switched on. ¥ WARNING: TRANSPORTING GAMES.

WARNING: DISCONNECT POWER. Always turn the power OFF and unplug the VGM before attempting service or adjustments unless otherwise instructed. Installing or repairing boards with power switched on can damage components and void the warranty.
WARNING: GROUND GAMES. Avoid electrical shocks! Do not plug in a VGM until you have inspected and properly grounded it. Only plug this game into a grounded, three-wire outlet. Do not use a “cheater” plug, or cut off the ground pin on the line cord.
WARNING: AVOID ELECTRICAL SHOCKS. The VGM system does not utilize an isolation transformer. Internal cabinet AC is not isolated from the external AC line.
WARNING: HANDLE FLUORESCENT TUBE AND CRT WITH CARE. If you drop a fluorescent tube or CRT and it breaks, it will implode! Shattered glass can fly eight feet or more from the implosion.
CAUTION: CHECK POWER SELECTOR, LAMP. Set the 115/230VAC selector on the power supply for the correct line voltage. Check the selector setting before switching on the VGM. Verify that the fluorescent lamp assembly is correct for the local line voltage.
CAUTION: USE PROPER FUSE. Avoid electrical shock! Replacement fuses must be identically rated. Fuse voltage and current ratings must be identically rated to the original fuse.
  • © Pe Be

2 MIDWAY AMUSEMENT GAMES, LLG

Page 5

CHAPTER 1 INSTALLATION

CAUTION: ATTACH CONNECTORS PROPERLY. Be sure board connectors mate properly. If connectors do not slip on easily, do not force them. A reversed connector may damage the VGM and void the warranty. Connector keys only allow a connector to fit one set of pins on a board.
CAUTION: USE CARE WHEN SHIPPING HARD DISKS. The hard disk drive must be packed in an anti-static bag. When shipping the drive for repair or replacement, pack it in an approved container (P/N 08-8068). Do not stack or drop hard disk drives.
WARNING: HAZARD TO EPILEPTICS. A very small portion of the population has a condition which may cause them to experience epileptic seizures or have momentary loss of consciousness when viewing certain kinds of flashing lights or patterns that are present in our daily environment. These persons may experience seizures while watching some kinds of television pictures or playing certain video games. People who have not had any previous seizures may nonetheless have an undetected epileptic condition.

If you or anyone in your family has experienced symptoms linked to an epileptic condition (e.g., seizures or loss of awareness), immediately consult your physician before using any video games.

We recommend that parents observe their children while they play video games. If you or your child experience the following symptoms: dizziness, altered vision, eye or muscle twitching, involuntary movements, loss of awareness, disorientation, or convulsions, DISCONTINUE USE IMMEDIATELY and consult your physician.

Cruis’N Exotica™ 3

Page 6

CHAPTER 1 INSTALLATION

NOTICE: This manual contains only information related to the CPU Board and game features for Cruis’n Exotica™. Refer to the original Operator’s Manual for the game machine being converted for specific service, parts and wiring information.

INSPECT KIT 44072 Kit 44072 contains artwork, a CPU Board assembly, PLD assemblies and the cables necessary to convert all cabinet styles (except motion games) of Cruis’n USA™, Cruis’n World™ and OffRoad Challenge™ into Cruis’n Exotica™.

Unpack the materials from the carton and check for obvious signs of damage. Use this checklist to be sure the kit is complete. NOTE: Thoroughly read and understand instructions prior to performing a conversion.

Item Part Number | Qty. Item Part Number | Qty. [CABLES ARTWORK

Cable, Conversion kitH-236991Decal, Side, Right & Left | 31-36012
Cable, Sound AdapterH-237001Marquee, Center31-36001
Cable, Linking, 16ft.20-10536-161|[BOARD ASSEMBLIES
MISCELLANEOUS.CPU BoardA-22536-21
IC PLCC Extractor20-99241PLD Assembly, U841-000011
ad_---||/PLD Assembly, U341-000021

PREPARE GAME CABINET FOR CONVERSION

  • Verify operation of existing game machine prior to performing conversion. Pay special attention to components that will be reused once conversion is complete. Check power supply, video monitor, currency acceptors, wiring harnesses, cabinet locks, and lighted marquee, etc.
  • Prepare cabinet for artwork.

*Cruis’n USA™ and Cruis’n World™ game machines being converted need only be wiped down with a clean cloth. Spray a mild cleanser directly on a cloth-- never spray a cleansing product directly on game cabinet or any other components-- and wipe clean.

*OffRoad Challenge™ game machines being converted require removal of old decals and any artwork from game cabinet. First, clean off any glue residue, then fill gouges or unused holes with quickhardening wood putty and sand until smooth. Remove any dust and then evenly cover cabinet with black paint and allow to dry completely prior to continuing.

INSTALL NEW HARDWARE

  • Switch off power to game cabinet and unplug from outlet. Unlock and remove the rear cabinet door.
  • Remove perforated metal enclosure located over CPU Board assembly. Discard enclosure, as it will not be reused with new board assembly.
  • Label and disconnect all wiring connected to CPU Board.
  • Remove hex head screws used to fasten CPU Board assembly to electronics rack. Lift board from rack, careful not to let the PCB standoffs fall into cabinet, and place it in an anti-static bag. Set screws and standoffs aside for reuse later.

4 MIDWAY AMUSEMENT GAMES, LLG

Page 7

CHAPTER 1 INSTALLATION

Prepare CPU Board for installation. Remove Cruis’n Exotica™ CPU Board from its anti-static packaging. Verify and set DIP Switch settings prior to installing CPU Board to ensure proper operation.

*Cruis’n USA™ and Cruis’n World™ games being converted require Switch 1 on DIP Switch 1 be in the ON position. Switch 4 on DIP Switch 1 must be in the OFF position. Refer to Setting Table for DIP Switch 1 located in Section Two: Adjustment, Diagnostic & Audit Menus for further information.

-OffRoad Challenge™ games being converted require Switch 1 on DIP Switch 1 be in the ON position. Switch 4 on DIP Switch 1 must be in the ON position. Refer to Setting Table for DIP Switch 1 located in Section Two: Adjustment, Diagnostic & Audit Menus for further information.

Place Cruis’n Exotica™ CPU Board in same position on electronics rack as the old CPU Board and fasten in place reusing original screws and standoffs. During installation, be careful not to let the PCB standoffs fall into the cabinet

Reattach cabling and wiring onto new CPU Board. Please note that not all of the preexisting cabling will be reconnected onto the new CPU Board.

. Connect Conversion Kit Adapter Cable, labeled H-23699, to main harness. Attach Z-header located at the end of this cable to harness --previously attached to P9-- and the opposite end to PLAYER 3 on CPU Board.

. Connect Sound Adapter Cable, labeled H-23700. Attach Z-header located at the end of this cable to the pre-existing Sound Cable --previously attached to P3 on the old CPU-- and the opposite end to P18 on new CPU Board.

. Cruis’n USA™ game conversions only: Connect Auxiliary Power Connector, the second cable attached to Sound Adapter Cable, which was previously connected to P5. Attach Z-header located at end of this cable to the pre-existing cable, and the opposite end to P22 on the CPU Board.

. Attach A2D connection to P11 on the new CPU Board. This connection was previously attached to P8.

. Remove cable for AC Power to Sound from P4 on the CPU Board. NOTE: DO NOT reconnect this cable. This connection is not reused.

. Install PLD assembly on Wheel Driver Board. Locate appropriate assembly by first identifying the game being converted and follow the steps outlined below.

*Cruis’n USA™ games being converted use PLD assembly 41-00001. Remove old PLD assembly from location U8 on wheel driver board using the PLCC extractor supplied in the kit to aid in removal of this part. Properly orient new PLD assembly over socket and press firmly to seat.

Cruis’n USA™ WHEEL DRIVER

Cruis’N Exatica™ 5

Page 8

CHAPTER 1 INSTALLATION

*Cruis’n World™ and OffRoad Challenge™ games being converted use PLD assembly 41-00002. Remove old PLD assembly from location U3 on the wheel driver board, using a slight rocking motion. Properly orient the new PLD assembly over socket and press firmly to seat.

Cruis’n World™ & OffRoad Challenge™ WHEEL DRIVER BOARD

UPDATE ARTWORK 16.

17.

18.

19. Apply cabinet decals. Remove backing and apply decal(s) to cabinet, smoothing it out as you go.

Replace marquee artwork. Remove hex head screws used to fasten retaining bracket along top edge of cabinet marquee. Set screws and retaining strip aside for reuse later.

Carefully lift out marquee artwork and/or marquee glass. Determine cabinet size for your marquee and cut Cruis’n Exotica™ marquee artwork to size. NOTE: Cutting guidelines are provided for your convenience and appear directly on the marquee artwork. Be sure to compare the size of the original artwork to the cutting guideline on the Cruis’n Exotica™ artwork prior to cutting.

Install marquee artwork, as well as marquee glass if it was removed. Replace retaining strip above marquee and fasten in place.

ENABLE LINKING (Optional)

  • Install new linking cable. Remove and discard pre-existing linking cable.
  • Starting with game cabinet designated Game 1, which is always located on the far left hand side, attach one end of the new linking cable to P12 on game electronics.
  • Route remaining free end of cable through notch located in the rear door opening and extend it toward desired game cabinet.
  • Attach free end of linking cable to P14 on game electronics inside game cabinet to be designated as Game 2.
  • Check DIP Switch is properly set to enable linking. Switch 6 on DIP Switch 1 must be in the ON position. Refer to Setting Table for DIP Switch 1 located in Chapter Two: Adjustment, Diagnostic & Audit Menus for further information.

FUNCTION Swi SwW2 SwW3 SW4 SW5 SW6 SW7 SW8 LINK DISABLED OFF LINK ENABLED ON LINKING ID NUMBER MASTER (GAME NUMBER 1) OFF | OFF SLAVE (GAME NUMBER 2) ON | OFF SLAVE (GAME NUMBER 3) OFF | ON SLAVE (GAME NUMBER 4) ON | ON

6 MIDWAY AMUSEMENT GAMES, LLG

Page 9

CHAPTER 1 INSTALLATION

TEST GAME

  • Plug power cord into AC line and switch on power to cabinet. Observe circuit board indicators light-up.
  • The game system loads program and automatically enters self-diagnostics. The system will automatically enter Attract Mode if no errors are found during self-diagnostics. Check wiring if problems occur and troubleshoot system if necessary.
  • Open coin door. Locate operator control switch panel and then press and hold the Begin Test button to enter menu system. Wait until the Main Menu screen appears on monitor.
  • Follow on-screen instructions to select Diagnostics, then choose SWITCH TEST. Follow on-screen instructions to verify that each of the controls is operational. If no errors are found, the controls will function well.
  • Return to Diagnostics screen, and then choose SOUND BOARD TEST. Follow on-screen instructions to verify that each of the speakers is operational. If no errors are found, the audio will function well.
  • Return to Diagnostics screen, and then choose STEERING WHEEL TEST. Follow on-screen instructions to verify presence of steering resistance.
  • Return to Main Menu screen, then choose CALIBRATE CONTROLS. Follow on-screen instructions to set steering limits. If no errors are found, controls will have the maximum accuracy.
  • Return to Diagnostics screen, and then choose LINKING TEST. Follow on-screen instructions to verify communications between game machine and another connected to it. If no errors are found, linking mode will function well.
  • Return to Main Menu screen, and then choose EXIT. The game will automatically enter its “attract” mode of operation (scenes and sounds from typical races, player’s scores, messages, etc.).
  • Insert currency or tokens and play a game. Change the volume and make any other adjustments. Close and lock all open doors. Tighten leveler nuts and engage caster locks. Replace and lock rear cabinet door.
CAUTION: You are solely responsible, and Midway has no responsibility for FCC compliance of installed kits. Do not install a FCC compliance label on the product until compliance is verified.

GAME FEATURES CRUIS’N EXOTICA™ ships configured for one-player game play. Cabinets may be linked to permit player competition.

Cruis’n Exotica™ is the latest, most thrilling and adventurous driving game in the Cruis’n™ video game series. Players can select tracks located in nearly a dozen exotic locales around the globe. From Tibet to Atlantis, Mars to Hong Kong, it is every player’s goal to accumulate a high score and mileage points. Speeding on their way toward a first place finish, drivers listen to cool tunes on the radio as they pass palms swaying in the breeze, 3-Dimensional animals cavorting roadside, and a variety of shortcuts hidden along the way. A player’s combined speed and skill virtually assure a place in the winner’s circle.

Player incentives, like free games for top speeds and distance, are sure to captivate players and ensure many trips around the track. And players finishing in first place will soon discover they have been whisked away on a free trip to an exotic locale. (Player incentives are Operator Optional and are enabled only at the Operator’s discretion)

Cruis’N Exatica™ 7

Page 10

CHAPTER 1 INSTALLATION

STARTING UP Each time power is switched on or restored to the game machine, the system enters Start-up Tests. Observe the screen displays a CPU Board map. Bad ICs are indicated in red, good ICs are in green. The software revision level is shown at the top of the screen.

Astatus screen to report on network activity will appear for about ten seconds. This screen is used to verify and troubleshoot connections on an array of cabinets.

The system enters Attract Mode once it passes all power-up tests. The Attract Mode screen will cycle endlessly and display a variety of scenes and sounds from a typical race on any given track. The system does not exit Attract Mode until the desired amount of coins or tokens is inserted and game play commences.

NOTE: An error message appears on screen and the game does not enter start up if an error is detected during the Start-Up Test. Record any messages before attempting to service game.

GAME RULES AND OBJECTIVES The game is configured for one-player game play, but up to four cabinets may be linked at one time to promote multiple player competition.

To enter Game Mode, individual player(s) must insert required amount of currency or tokens, press the Start button, and select a car and track. The main objective of the game is to earn top ranking against other drivers.

PLAYER CONTROLS + Green Start button The start button is used to begin game play or to select certain features before a race.

Orange Radio button The radio button allows the player to turn radio sounds on and off, and to change stations.

Red button This button shows the view from the driver’s seat inside the vehicle. This is a normal driver view.

White button This button shows the view from directly behind. The player can see the rear end of the vehicle.

Blue button This button shows an aerial view of the vehicle. This is what a helicopter camera would see.

Pedals The gas and brake pedals control vehicle speed. Press the gas pedal twice to create a power boost.

NOTE: Upright cabinet styles are not equipped with a brake pedal.

Seat Position Adjuster The seat position may be changed at any time, even during competition. Pull the adjustment lever to the left while seated then slide the seat forward or backward. Release the lever to lock the seat into position.

GAME OPERATION Access to the menu system for statistics, adjustments, and testing is secured by a keyed lock to prevent tampering. When the menu system is entered, on screen messages guide the operator through tasks.

Cabinet Switches + The ON/OFF SWITCH is located on the topside of the cabinet.

8 MIDWAY AMUSEMENT GAMES, LLG

Page 11

CHAPTER 1 INSTALLATION

+ The REMOTE MONITOR ADJUSTMENTS are located inside coin vault. Adjust video image size, brightness, contrast, etc., using the Monitor Test screens and the monitor controls.

  • The SLAM TILT SWITCH detects forceful vibrations against coin door to eliminate pounding for free games. It is located on the inside of the coin door opening near the lock.
NOTE: The Slam switch is not present on Dollar Bill Validator (DBV) ready doors.

TYPICAL COIN DOOR SWITCH LOCATION

Control Buttons + The TEST BUTTON accesses the game Menu System. Press the Test button to access the Main Menu and select individual diagnostics, audits, utilities, etc.

+ The VOLUME UP BUTTON scrolls through menu selections or adjustment items and raises the sound level in game play. An audible tone accompanies activation of this button.

+ The VOLUME DOWN BUTTON scrolls through the menu selections or adjustment items and lowers the sound level in game play. An audible tone accompanies activation of this button.

+ The SERVICE CREDIT BUTTON allots credits without affecting the game's bookkeeping total. This button can also be used to exit from menu selections or to return to the main menu.

Cruis’N Exatica™

Page 12

CHAPTER 1 INSTALLATION

CPU BOARD ASSEMBLY A-22536-2

Designation Part Number Function Description

U4T5460-15676-00 _—*[ Config Memory Backup‘SV Lithium Battery
Fi, F25735-13853-00Circuit Protection2A SB Fuse 5x20mm
U2A-5343-40072-11SoundEPROM Assembly
U35341-16431-14SoundEPROM Assembly
U45341-16431-15SoundEPROM Assembly
U10A-5343-40072-1Programming & ImagesEPROM Assembly
U11A-5343-40072-2Programming & ImagesEPROM Assembly
uU12A-5343-40072-12 | Programming & ImagesEPROM Assembly
U13A-5343-40072-13 | Programming & ImagesEPROM Assembly
U145341-16431-3ImagesEPROM Assembly
U155341-16431-4ImagesEPROM Assembly
U165341-16431-5ImagesEPROM Assembly
U175341-16431-6ImagesEPROM Assembly
U18A-5343-40072-23 | ImagesEPROM Assembly
U19A-5343-40072-24 | ImagesEPROM Assembly
U20A-5343-40072-21ImagesEPROM Assembly
U21A-5343-40072-22 | ImagesEPROM Assembly
U225341-16431-17ImagesEPROM Assembly
U235341-16431-18ImagesEPROM Assembly
U245341-16431-19ImagesEPROM Assembly
U255341-16431-20ImagesEPROM Assembly
U265347-16378-00High Score Memory Backup _| Lithium Battery
U53A-2325027” Game InstructionsPIC Assembly

Mipway AMUSEMENT GAMES, LLG

Page 13

CHAPTER Two

ADJUSTMENT, DIAGNOSTIC & AUDIT MENUS

Cruis’N Exotica™

Page 14

CHAPTER 2 DiaGNostics

MENU SYSTEM

WHAT IS THE MENU SYSTEM? The game’s Menu System is a series of auditing, game adjustments and diagnostic screens. You can easily access and apply these screens to optimize game performance. For instance...

+ Use game audit screens to assess game performance. + Use adjustment screens to help you customize game performance. For example, you can restore factory default game settings. You can also calibrate player controls for player accuracy. + Use diagnostic screens to verify proper equipment operation.

ACCESSING THE MENU SYSTEM Open the coin door. Locate and press the TEST MODE switch. The game system will exit game Attract Mode and enter Diagnostic Mode. The system runs a brief self-test, and then displays the Main Menu. The Main Menu is the opening screen of the Menu System.

Game audits, adjustments and diagnostics are line items on the Main Menu. Selecting an item opens its submenu. Every submenu presents various options that you may act upon.

CRUIS’N EXOTICA DIAGNOSTICS

IMAIN MENU VERSION INFORMATION IDIAGNOSTIC MENU VERSION: GAME AUDITS DATE: [ADJUSTMENT MENU. BUILD: UTILITIES SERIAL: CALIBRATE CONTROLS CHIP DATE: eae VOLUME

PRESS VOLUME UP/DOWN BUTTONS TO SELECT PRESS TEST TO ACTIVATE PRESS SERVICE CREDIT BUTTON TO EXIT TYPICAL MAIN MENU SCREEN

MENU LAYOUT Observe that each menu screen basically uses the same layout. The game ID, Serial Number, and Date of Manufacture will appear on most of the menu screens. These numbers will be helpful to factory personnel when referring to your game for parts or service.

+ The block at the top of each screen displays the current menu title. + Data, such as menu items and video reports, etc., appears in the center of the screen. + Messages, for example explanations and active control functions, etc., appear at the bottom of the screen.

MENU NAVIGATION TOOLS, Use the operator control buttons located inside the coin door to navigate menus. Press the Volume Up or Volume Down buttons to scroll through the menu options.

Notice the options sequentially become highlighted. Press the Test button to select a highlighted option and access the next menu level. NOTE: Only one highlighted option can be selected at a time.

To return to play mode, select Exit and press the Test button while in the Main Menu screen.

2 Mipway AmMusEMENT Games, LLG

Page 15

CuHapter 2 Diagnostics

Diagnostics Menu

DIAGNOSTIC MENU To verify the condition of the electrical and electronic hardware in the game, select Diagnostics Menu at the Main Menu. Diagnostic tests assist you in checking and adjusting the game’s major systems. It is

important to periodically run diagnostics to improve and maintain game performance and player satisfaction.

DIAGNOSTIC MENU

Use the Volume Up or Volume Down button to highlight the desired Diagnostic Menu option and press the Test button to enter.

Switch Test Menu

SWITCH TEST To verify proper operation of switch and button inputs in the game, select SWITCH TEST at the Main Menu.

SWITCH TEST

Cruis’N Exotica™ 3

Page 16

CHAPTER 2 DiaGNostics

Main Menu

Diagnostic Menu, continued Switch Test Menu, continued

Use the Volume Up or Volume Down button to highlight the Switch Test option and press the Test access it. Press any switch on the control panel or coin door to cause the corresponding indicator on the screen to illuminate. Each illuminated square represents one completed switch circuit.

Main Menu

Diagnostic Menu, continued Motion Test

MOTION TEST To verify functionality of motion seat controls, select MOTION TEST at the Main Menu.

NOTICE re Selecting any test from the Motion Test Menu will activate the seat causing it to automatically begin to move on its own. Use caution when conducting tests from this menu.

Use the Volume Up or Volume Down button to highlight the Motion Test option and press the Test button to access it. Use the Service Credits button at any time to exit the Motion Test and return to the Main Menu.

MOTION TEST

IHOME POSITION MOTION ERRORS: X OPERATIONS TEST TILT LEFT MOTION VERSION: X [TILT RIGHT ERROR: [TILT FORWARD CODE: X [TILT BACK ICLEAR MOTION ERRORS BURN-IN TEST

IPRESS VOLUME UP/ DOWN BUTTONS TO SELECT IPRESS SERVICE CREDIT BUTTON TO EXIT

HOME POSITION automatically centers the motion seat so that it is positioned upright and does not tilt at any angle.

OPERATIONS TEST automatically cycles through each of the other test options.

TILT LEFT automatically tilts the seat at a left leaning angle.

TILT RIGHT automatically tilts the seat at a right leaning angle.

TILT FORWARD automatically tilts the seat at forward-facing angle.

TILT BACK AUTOMATICALLY TILTS THE SEAT IN A BACKWARD-FACING ANGLE.

CLEAR MOTION ERRORS erases any errors form memory.

BURN-IN TEST diagnoses intermittent circuit board problems. This test automatically cycles non-stop and cannot be stopped by pressing the Service Credit button.

4 Mipway AMUSEMENT Games, LLG

Page 17

CuHapter 2 Diagnostics

Main Menu

Diagnostic Menu, continued

DIP Switch Test

DIP SWITCH TEST To verify the functionality of both 8-position DIP switches on the CPU Board, select DIP SWITCH TEST at the Main Menu. Observe immediate on-screen results by changing the setting on a switch.

Use the Volume Up or Volume Down button to highlight the DIP Switch Test option and press the Test button to access it. The current settings appear on-screen. Consult the table on the next page to determine if changes are required. The default switch positions are all OFF for standard operation.

A vertical bar next to the switch position column indicates a common switch function.

DIP SWITCH TEST

DIP SWITCH 1 DIP SWITCH 2

1 OFF DEDICATED 1 OFF 2 OFF MOTION OFF 2 OFF 3 OFF UPRIGHT CABINET 3 OFF USA1 4 OFF WHEEL INVERT OFF 4 OFF 3 COINS/ 1 CREDIT 5 OFF 32M ROM NORMAL. 5 OFF 6 OFF LINK DISABLED 6 OFF 7 OFF SHARED LINK GAME # 7 OFF 8 OFF SHARED LINK GAME # 8 OFF

PRESS ANY BUTTON TO EXIT

TYPICAL DIP SWITCH SCREEN

Setting Table for DIP Switch 1

FUNCTIONswisw2SW3sw4SW5SW6SW7~SW8

DEDICATED OFF KIT * ON

MOTION DISABLED OFF MOTION ENABLED ON

UPRIGHT STYLE CABINET OFF SIT DOWN STYLE CABINET ON

WHEEL INVERT DISABLED** OFF WHEEL INVERT ENABLED SEE NOTES BELOW ON 32M ROM NORMAL OFF 16M ROM ON

LINK DISABLED OFF LINK ENABLED ON

LINKING ID NUMBER MASTER (GAME NUMBER 1) OFF | OFF

SLAVE (GAME NUMBER 2ONOFF
SLAVE (GAME NUMBER 3OFFON
SLAVE (GAME NUMBER 4)ONON

*DIP 1, Switch 1 must be set to the ON position in order for proper kit operation.

*“DIP 4, Switch 1 must be set to OFF for Cruis’n USA™ and Cruis’n World™ game conversions; DIP 4, Switch 1 must be set to ON position for OffRoad Challenge™ game conversions in order to reverse wheel motion and allow the shifter to be read as Normally Closed.

Cruis’N Exotica™ 5

Page 18

CHaPTeR 2 DiaGNostics

Main Menu Diagnostic Menu, continued DIP Switch Test, continued

Game Adjustments for Linked Operation To avoid confusion, we recommend that all adjustments be set to identical values before Video Game Machines (VGMs) are linked. VGMs might operate incorrectly if this is not the case, with the following exceptions:

NOTE: All cabinets must have compatible software in order to link properly. Unlock the coin door and press the TEST button. The software version number is found on the Main Menu screen in game diagnostics. It does not matter what version is installed as long as all version numbers are the same.
  • Linked VGMs must all have compatible software versions. Newer versions may contain instructions that previous versions do not have, causing them to halt or reset at random. On-screen messages will indicate that different versions are in use when the linking feature is enabled for each.
  • The graphic effects and added attractions for the slave cabinets must be the same as the master. All games must have these features enabled or all must have them disabled. Mixed settings, for example road kill or a show girls setting, can cause games to become unsynchronized during competition and lead to incorrect final results (i.e., two first place finishes with different times, collisions with unseen objects, etc.).
  • The linking feature overrides some of the individual software settings. For instance, the master (VGM #1) sets and controls the difficulty level for all linked slaves. The difficulty level reported by the slave games may not match the setting of the master game.
  • The linked game with the highest ranking determines software settings. Adjustments such as bonus times will be controlled by the games in decreasing identification order. For example, if four games are linked, slave game #3 will always override game #4 but have no effect on games #1 or #2. This permits games to have different standards to help equalize players with different skill levels.

The linking cables attach to a connector on a metal bracket located under the CPU Board Assembly at the rear of the cabinet. Unlock and remove the cabinet rear door for linking access.

Notes on Linking:

  • For a 2-way link, the leftmost VGM is the master (#1); the second VGM is slave #2. One linking cable is required.

For a 3-way link, the left VGM is the master (#1); the center and right VGMs are slaves #2 and #3. Two cables are required.

For a 4-way link, the leftmost VGM is the master (#1); the left center VGM is slave #2, right center machine is #3, and the right most machine is slave #4. Three linking cables are required.

  • The linking feature will not function if the master is not turned on and in normal game play mode. If the master is turned off, disconnected from the linking cable, or in any other mode of operation (offline, diagnostics, etc.), none of the slaves will be able to link.

6 Mipway AMUSEMENT Games, LLG

Page 19

CuHapter 2 Diagnostics

Main Menu Diagnostic Menu, continued DIP Switch Test, continued

+The linking feature will function for all other VGMs if one of the slaves is not turned on and in normal game play mode. If any slave is turned off, disconnected from the linking cable, or in any other mode of operation (offline, diagnostics, etc.), the linking ability of other slaves will not be affected.

-The linking feature will function for some VGMs, and not others, if all of the link activity switches are not enabled or the software version numbers are not the same. The master game will not recognize other games with disabled linking or different link identification numbers.

Game Adjustments for Coinage

Setting Table for DIP Switch 2

COUNTRY CODEswisw2SW3SW4SW5SW6SW7~SW8
USAOFF*|OFF*JOFF*OFF*[OFF*
IGERMANYIONOFF|OFF|OFF|OFF
FRANCEOFF|ONOFF|OFF|OFF
ICANADAIONIONOFF|OFF|OFF
SWITZERLANDOFF|OFF|ONOFF = |OFF
ITALYIONOFF|ONOFF = |OFF
UKOFF|ONIONOFF = |OFF
ISPAINIONIONIONOFF = |OFF.
AUSTRALIAOFF|OFF|OFFj|ONOFF
JAPANIONOFF|OFF|ONOFF
TAIWANOFF|ONOFF|ONOFF
AUSTRIAIONIONOFF|ONOFF
BELGIUMOFF|OFF|ONIONOFF
ISWEDENOFF|OFF|OFF|OFF|ON
FINLAND:IONOFF|OFF|OFFj|ON
NETHERLANDSOFF|ONOFF|OFF|ON
NORWAYIONIONOFF|OFF|ON
DENMARKOFF|OFF|ONOFF|ON
HUNGARYIONOFF|ONOFF|ON
IGENERALIONIONIONOFF|ON

IUSA1/GER1/FR1/SPN1/AUSTRIA//1/GEN1 OFF = |OFF

IUSA3/GER1/FR1/SPN1/AUSTRIA//1/GEN3,IONOFF
IUSA7/GER1/FR1/SPN1/AUSTRIA//1/GEN5,OFF|ON
IUSA8/GER1/FR1/SPN1/AUSTRIA//1/GEN7IONION

ICAN1/SW1/ITL1/UK1/JPN1/TWN1/BLGN1 OFF = |OFF

ICAN2/SW2/ITL2/UK2/JPN2/TWN2/BLGN2IONOFF
ICAN3/SW3/ITL3/UK3/JPN3/TWN3/BLGN3OFF|ON

NTRLNDS1/ FNLD1/NWY1/DNMK1/HUN1 OFF = |OFF

NTRLNDS2IONOFF

DIP SWITCH SETTING FOR COINAGE There are many ways to select the type and quantity of currency recognized by the game machine.

The most common coin combinations for several countries are pre-programmed and may be selected from the table when Standard Pricing is activated (see Adjustments, pg. 16).

DIP Switch settings may be changed with the power switched on. Set any switch and then observe the screen to verify that the desired selection is enabled. NOTE: If CMOS Coin Settings are active (set to ON), switch settings for an individual Country will have no effect.

Some European countries may accept currency used in other countries. The most popular coinage settings are listed beneath ‘Other’ in the Standard Pricing Table.

Cruis’n Exotica™ 7

Page 20

CHAPTER 2 DiaGNostics

Main Menu

Diagnostic Menu, continued DIP Switch Test, continued

  • Alternate settings are listed beneath ‘General’ in the Standard Pricing Table.
  • Default settings are denoted by an (*). Switches 1 through 5 select country codes. Switches 6 and 7 are used to select one of four modes for each country.

Main Menu

Diagnostic Menu, continued CPU Board Test

CPU BOARD TEST To verify proper operation of memory circuits, select CPU BOARD TEST at the Main Menu. This test checks the memory circuits in a manner similar to the Start-Up Test. A pattern representing the layout of the RAM and ROM circuits on the CPU Board will appear on-screen while the video circuits are tested.

TYPICAL CPU RAM & ROM PATTERN

Use the Volume Up or Volume Down button to highlight CPU Board Test and press the Test button. The memory circuits are shown as gray with a white outline. During the test, good ICs are colored green; faulty ICs are colored red. Press the Service Credits button to return to the Diagnostic Menu.

8 Mipway AMUSEMENT Games, LLG

Page 21

CuHapter 2 Diagnostics

Sound Board Test

SOUND BOARD TEST To verify proper operation of sound components, select SOUND BOARD TEST at the Main Menu. This test allows you to access and listen to the sounds used in the game.

SOUND BOARD TEST

Use the Volume Up or Volume Down button to highlight the Sound Board Test option and press the Test button. Press Service Credit to return to the Diagnostic Menu when finished.

Linking Test

LINKING TEST To verify communications between the game machine and others connected to it, select Linking Test at the Main Menu.

LINKING TEST

Use the Volume Up or Volume Down button to highlight the Linking Test option and press the Test button. This test runs automatically and will display all results on-screen.

Press Service Credit to clear errors and restart the test cycle. Press the Test button to exit from this menu screen.

Cruis’n Exotica™ 9

Page 22

CHAPTER 2 DiaGNostics

Main Menu Diagnostic Menu, continued Steering Wheel Test

STEERING WHEEL TEST To verify the proper directional movement of the steering wheel, select Steering Wheel Test at the Main Menu. Make sure hands and other objects are clear of the steering wheel when this test is selected because the wheel will automatically rotate on its own. Follow the on-screen instructions.

STEERING WHEEL TEST [TURN WHEEL LEFT PRESS TEST TO CONTINUE

[TURN WHEEL RIGHT PRESS TEST TO CONTINUE

Use the Volume Up or Volume Down button to highlight Steering Wheel Test and press the Test button. The steering wheel immediately turns to the left. Press the Test button a second time and the wheel turns to the right and will automatically return to the Diagnostic Menu.

Main Menu

Diagnostic Menu, continued Monitor Test

MONITOR TEST To verify color clarity of the monitor, select Monitor Test at the Main Menu.

Use the Volume Up or Volume Down button to highlight the desired monitor test and press the Test button. Repeatedly press the Test button to cycle through test screens and automatically return to the Main Menu. Watch for the following results on-screen during this test.

COLOR BARS. Observe 4 color bars in different shades appear on-screen as aids in adjusting the green, blue, and red color levels. Each color should appear sharp and clear. Check video brightness and contrast.

The CROSSHATCH PATTERNS test fills the screen with a series of dots within a grid. Observe the dots are perfectly round and that both the grid and dots are clear. Inspect monitor convergence, linearity, and screen size.

If any of the tests show a need for CRT adjustment, use the proper knobs on the Monitor Controls board.

Main Menu Diagnostic Menu, continued Burn-in Test

BURN-IN TEST To properly diagnose intermittent CPU Board problems, select Burn-In Test at the Main Menu. This test cycles non-stop through the CPU Board Test.

A pattern representing the layout of the RAM and ROM circuits on the CPU Board will appear on-screen while the video circuits are tested.

10 Mipway AMUSEMENT Games, LLG

Page 23

CuHapter 2 Diagnostics

Burn-in Test, continued

u

u

; [4

} i «| u

mr. i 1

Use the Volume Up or Volume Down button to highlight Burn-In Test and press the Test button to activate. The Burn-in Test will stop and display an error message on-screen if an error is detected.

Inputs from the control buttons are ignored during Burn-In. The Burn-In Test cannot be halted from the menus. To halt the test switch off power to the game machine and then power back up.

Lamp Test

LAMP TEST To detect intermittent or faulty incandescent bulbs, select Lamp Test at the Main Menu. This test ensures that the incandescent bulbs critical to game operation function properly.

Use the Volume Up or Volume Down button to highlight Lamp Test and press the Test button. During the test observe the selected lamp switches turn on or off when the corresponding selection is made.

LAMP TEST

Cruis’n Exotica™ 11

Page 24

CHaPTeR 2 DiaGNostics

Main Menu Diagnostic Menu, continued Lamp Test, continued

Notes on the Lamp Test

  • The RADIO button is not illuminated and requires no lamp test.
  • The MARQUEE LAMPS are located inside the lighted header as part of the Deluxe Linking Kit.
  • To override individual tests select either TURN ON or TURN OFF ALL LAMPS. The lamps also automatically switch off when the Service Credit button is pressed to exit this screen.

Press the Service Credit button to return to the Diagnostic Menu.

Main Menu

Diagnostic Menu, continued LED Test

LED TEST To verify the proper functionality of the Dashboard LEDs, select LED Test at the Main Menu. This test allows you to control and test the illumination of the LED’s located on the dash PCB.

Use the Volume Up and Volume Down buttons to highlight the LED Test and press the Test button. Observe the following activity on the dash PCB.

LED TESTS

ILEDS ON ILEDS OFF ILEDS CYCLE

IPRESS VOLUME UP/DOWN TO SELECT IPRESS TEST BUTTON TO ACTIVATE IPRESS SERVICE CREDIT BUTTON TO EXIT

Select LEDs ON to simultaneously turn on all LED’s. LEDs will remain illuminated until switched off. Select LEDs OFF to simultaneously turn off all LED’s. LEDs will not be illuminated during this phase. Select LEDs CYCLE to sequentially cycle through and turn each LED on and off, originating on the lefthand side of the dashboard PCB. Press the Service Credit button to halt the cycle.

Main Menu

Game Audits

GAME AUDITS Press the Volume Up or Volume Down button to highlight Game Audits in the Main Menu and press the Test button. To move between pages in an Audit Table, press the Volume Up or Volume Down button. Press the Test or Start button to return to the Main Menu from this screen.

The Game Audits table displays play statistics. The Audit item is listed on the left side of the table and the amount of play appears on the right side. Record all statistics prior to performing any service or repairs.

12 Mipway AMUSEMENT Games, LLG

Page 25

CuHapter 2 Diagnostics

Game Audits, continued

GAME AUDITS

AUDIT TABLE, PAGE 1

GAME AUDITS

AUDIT TABLE, PAGE 2

GAME AUDITS

AUDIT TABLE, PAGE 3

Cruis’N Exotica™ 13

Page 26

CHAPTER 2 DiaGNostics

| Game Audits, continued |

GAME AUDITS

AUDIT TABLE, PAGE 4

GAME AUDITS

AUDIT TABLE, PAGE 5

GAME AUDITS

AUDIT TABLE, PAGE 6

14 Mipway AMUSEMENT Games, LLG

Page 27

CuHapter 2 Diagnostics

Game Audits, continued

GAME AUDITS

AUDIT TABLE, PAGE 7

GAME AUDITS

AUDIT TABLE, PAGE 8

GAME AUDITS

AUDIT TABLE, PAGE 9

Cruis’n Exotica™ 15

Page 28

CHAPTER 2 DiaGnNostics

Main Menu

Adjustment Menu

ADJUSTMENT MENU To optimize game performance and earnings or to change the look or sound of the game, select the Adjustment Menu at the Main Menu. The Attract Mode features, Game Pricing and Game difficulty may also be customized, along with awarding free races to encourage players. Free game player incentives may reduce earnings. NOTE: Individual Game Adjustments are explained in more detail on the following pages.

Press the Volume Up or Volume Down button to highlight the desired Adjustments Menu option on the Main Menu and press the Test button. Use these screens to optimize game performance and earnings.

The Adjustments Menu offers several options. Press the Volume Up or Volume Down button to highlight an option and press the Test button. Each time an option on the menu is activated you are provided with multiple setting choices. Use the Volume Up or Down button to change the current value setting and observe a confirmation box as shown below appears.

SELECT THIS PRICING? ARE YOU SURE?

YES NO

TEST TO ACCEPT UP TO INCREASE DOWN TO DECREASE

TYPICAL CONFIRMATION BOX

Press the Volume Up or Volume Down to make your selection, then press the Test button to lock in the setting. Selecting NO cancels any changes changed values and returns the previous values to memory.

ADJUSTMENT VALUES

STANDARD PRICING--USA 1 ON CUSTOM PRICING OFF FREE PLAY OFF FIRST PLACE GETS FREE RACE ON START TIME BONUS SECONDS 75 CHECKPOINT BONUS SECONDS, 20 ATTRACT MODE SOUNDS OFF INITIAL ENTRY ON MINIMUM VOLUME LEVEL ab) STEERING WHEEL POWER 5 SPEED IN MPH OR KPH MPH KEYPAD ACTIVE OFF MANUAL TRANS DISABLED OFF SHOW ROADKILL ON SHOW ENDING ON SHOW GIRLS ON HIGH SCORE RESET 5000 GAME DIFFICULTY 5 MAXIMUM CREDITS 30 MULTI-PLAYER FREE RACES OFF

PRESS VOLUME UP/DOWN TO SELECT PRESS TEST BUTTON TO ACTIVATE PRESS SERVICE CREDIT BUTTON TO EXIT

16 Mipway AMUSEMENT Games, LLG

Page 29

CuHapterR 2 DiaGNostics

Main Menu

Adjustment, continued Pricing Table,

Use the Pricing Table illustrated below as a guide to select and/or verify the desired coin credit setting(s).

NAMESTARCONTINUE[CREDITS/COINCOINT|[COIN2[COINS[COINS|BILL
[ANTILLE:256, 4GBe1G
AUSTRALIA 122T73X20¢, 27$7.00.20¢$1.00
AUSTRALIA 2111/5X20¢, 1/$1.00.20¢$1.00
| AUSTRIA TTSSch,27T0Sch5 SchTO Sch
AUSTRIA 2221/2X5Sch, 3/2X10Sch5 Sch10 Sch
BELGIUM 1221/20BF20BF20BF
BELGIUM 22‘23/20BF20BF20BF
BELGIUM 3222/20BF20BF20BF
BELGIUM ECA221/20BF50BF20BF5BF
[CANADA TTT2XDBE,STSTGBE
CANADA 2&=1/2x25¢,3/$125¢$1.00
CANADA 32-3/ $1.00, 6 / $2.00$1.00$2.00
CANADA ECA221/2x 25¢,3/$125¢$1.00$2.00
DENMARK22‘3/SDKr, 7/10DKr5DKrTODKr
FINLAND22TWiFmk1Fmk5Fmk
FRANCE TFr, S/TOFr‘SFrTOF
FRANCE 2212/5Fr, 4/10FrSFr10Fr
FRANCE 3211/5Fr, 3/10FrSFr10Fr
FRANCE 4211/5Fr, 2/10FrSFr10Fr
FRANCE 5z1|2/5Fr, 5/10Fr, 11/2 X 10FrSFr10Fr
FRANCE 6212/5Fr, 4/10Fr, 9/2 X 10FrSFr10Fr
FRANCE 7&11/SFr, 3/10Fr, 7/2 X 10FrSFr10Fr
FRANCE 821SFr, 2/10Fr, 5/2 X 10FrSFr10Fr
FRANCE 9211/3 X 1 Fr, 2/5Fr(FrSFr
FRANCE 10211/2 X 1Fr, 3/SFr(FrSFr
FRANCE 11211/3 X 1Fr, 2/5Fr, 5/2 X SFr(FrSFr
FRANCE 12211/2 X 1Fr, 3/5Fr, 7/2 X SFr1FrSFr
[FRANCE ECA TTTFr, S/TOFrTFTFrTORTOFT
FRANCE ECA 2112/5Fr, 4/10Fr(FrSFr10Fr20Fr
FRANCE ECA 3111/5Fr, 3/10Fr(FrSFr10Fr20Fr
FRANCE ECA 411/5Fr, 2/10Fr(FrSFr10Fr20Fr
FRANCE ECA 5112/5Fr, S/10Fr, 11/2 X 10Fr(FrSFr10Fr20Fr
FRANCE ECA 6112/5Fr, 4/10Fr, 9/2 X 10Fr(FrSFr10Fr20Fr
FRANCE ECA 711V/5Fr, 3/10Fr, 7/2 X 10Fr(FrSFr10Fr20Fr
FRANCE ECA 8111/5Fr, 2/10Fr, 5/2 X 10Fr(FrSFr10Fr20Fr
FRANCE ECA 9111/3 X 1Fr, 2/5Fr(FrSFr10Fr20Fr
FRANCE ECA 10111/2 X 1Fr, 3/SFr(FrSFr10Fr20Fr
FRANCE ECA 11111/3 X 1Fr, 2/5Fr, S/M10Fr(FrSFr10Fr20Fr
FRANCE ECA 12111/2 X 1Fr, 3/SFr, 7/10Fr(FrSFr10Fr20Fr
FRANCE ECA 1311A/AO0F r, 2/20F r, 4/30Fr1FrSFr10Fr20Fr
FREE PLAY~_adNoneNoneNoneNoneNone
| GERMANY 722T/1DM, 6/5DM1DM5DM
GERMANY 2211/1DM, 7/5DM1DM5DM
GERMANY 3211/1DM, 8/5DM1DM5DM
GERMANY 4211/1DM, 5/5DM1DM5DM
GERMANY 5311/1DM, 6/5DM1DM5DM
GERMANY ECA 1221/1DM, 2/2DM, 6/5DM1DM2DM5DM
GERMANY ECA 2211/1DM, 2/2DM, 6/5DM1DM2DM5DM
GERMANY ECA 3111/1DM, 2/2DM, 6/5DM1DM2DM5DM
HUNGARY22/2X10Ft, 3/2X20FtTOFt20Ft
TTALY=2TS00LItS00LIt‘SOOLIt
JAPAN TT/T00venTOO YenTOO Yen
JAPAN 2222/100Yen100 Yen100 Yen
JAPAN 3.111/100Yen100100
JAPAN 4112/100Yen100100
JAPAN 5114/100Yen100100
JAPAN 6111/2X100Yen100100
[NETHERLAND:THTHFT,3/2.5HFTTHEFTHFT
NEW ZEALAND 111TSTST$2
NEW ZEALAND 2112/51$1$2
NORWAYINKr, 6/TONKrSNErTONKr
PAIN 1221/100Pta, 6/500Pta100Pta500Pta_
PAIN 2fs=1/100Pta, 5/500Pta100Pta‘500Pta_
SWEDENTSXTSEr,275SKrTSKrKr
SWITZERLAND 122TSF, 6/5SFrSFrSSFr
SWITZERLAND 2221/1SFr, 7/SSFr1SFrSSFr
SWITZERLAND 3221/1SFr, 8/SSFr1SFrSSFr
UKECA1111750p, 3/£1.00£1.00‘50p20p0p£2.00

Cruis’n Exotica™ 17

Page 30

CHaPTeR 2 DiaGNostics

NAMESTARCONTINUE_[CREDITS/COINCOINT|[COIN2[COINS|COIN4|BILL
UKECA2111750p, 2/£1.00£1.00‘50p20pT0p£2.00
UKECA3111730p, 2/50p, 5/£1.00£1.0050p20pT0p£2.00
UK4TTT50p, SET.00ET.00Op
UKS111/50p, 2/£1.00£1.0050p
UKECA6111730p, 2/50p, 4/£1.00£1.0050p20pTOp£2.00
UKECATTET.00ET.00Op0pTOp£2.00
UKECA8111750p, 2/£1.00, 4/£2.00£1.0050p20p10p£2.00
USAT11T3X25¢25¢25¢$7.00
USA2111/4X25¢25¢25¢$1.00
USA3.111/25¢25¢25¢$1.00
USA4111/50¢, 3/$1.0025¢25¢$1.00
USA5:211/50¢, 4/$1.0025¢25¢$1.00
USA6-111/50¢25¢25¢$1.00
USA7111/50¢, 3/$1.0025¢25¢$1.00
USA8re21/50¢, 4/$1.0025¢25¢$1.00
USA321/25¢, 4/$1.0025¢25¢$1.00
USA10.331/25¢, 4/$1.0025¢25¢$1.00
USA11421/25¢, 4/$1.0025¢25¢$1.00
USA12431/25¢, 4/$1.0025¢25¢$1.00
USA13.441/25¢, 4/$1.0025¢25¢$1.00
USA ECA331/25¢, 4/$1.00$1.0025¢10¢05¢$1.00
USA 15211/25¢25¢25¢$1.00

Main Menu

Adjustment, continued Custom Pricing Menu

Use the Custom Pricing Menu to specify pricing settings other than the ones listed in the Standard Pricing Table. Custom Pricing can also be used to select the amount of credits required to start a game and the amount of credits required to continue a game.

Press the Volume Up or Volume Down button to highlight an option, i.e. Left Chute, Minimum Units, etc., and press the Test button. Next, use the Volume Up or Down button to adjust the current value setting, then press the Test button to lock in the setting. Selecting NO cancels any changes changed values and returns the previous values to memory.

CUSTOM PRICING MENU

UNITS FOR

EXIT TO MAI LEFT CHUTE UNITS RIGHT CHUTE UNITS CENTER CHUTE UNITS FOURTH CHUTE UNITS BILL CHUTE UNITS UNITS PER CREDIT BONUS MINIMUM UNITS CREDITS TO START CREDITS TO CONTINUE LEFT CHUTE COUNTER RIGHT CHUTE COUNTER CENTER CHUTE COUNTER FOURTH CHUTE COUNTER BILL CHUTE COUNTER SHOW FRACTIONS SELECT CUSTOMER PRICING IN MENU

PRESS VOLUME UP/ DOWN TO SELECT PRESS TEST BUTTON TO ACTIVATE PRESS SERVICE CREDIT BUTTON TO EXIT KK KK KK DK KK OK KK KOK OK

YES NO.

Mipway Amusement Games, LLG

Page 31

CuHapter 2 Diagnostics

Main Menu Adjustment, continued Custom Pricing Menu, continued

The following table clarifies Custom Pricing Menu terms...

SCREEN TERM DEFINITION CHUTE UNITS Currency inserted accumulates units. This adjustment specifies the quantity of units given for each coin or bill in each coin chute. UNITS PER CREDIT Units needed to accumulate a credit. UNITS FOR BONUS Units awarded after a player has accumulated enough points for a bonus. MINIMUM UNITS: No credits will be awarded until the minimum required currency units have been accumulated.

CREDITS TO START Units needed to enter game play. CREDITS TO CONTINUE Units needed to continue game play. CHUTE COUNTER Total number of units accepted by a chute. SHOW FRACTIONS Fractional credits are observable in credit screen when YES is selected.

CUSTOMER PRICING Selecting YES enables custom pricing and overrides default settings.

Main Menu

Adjustment Menu, continued

To further optimize game performance and earnings, select the desired option on the Adjustment Menu. Press the Volume Up or Volume Down button to highlight the desired Adjustments Menu option on the Main Menu and press the Test button. Use these screens to optimize game performance and earnings.

Each time an option on the menu is activated you are provided with multiple setting choices. Use the Volume Up or Down button to change the current value setting and observe a confirmation box as shown below appears.

SELECT THIS PRICING? ARE YOU SURE?

YES NO

TEST TO ACCEPT UP TO INCREASE DOWN TO DECREASE TYPICAL CONFIRMATION BOX

Press the Volume Up or Volume Down to make your selection, then press the Test button to lock in the setting. Selecting NO cancels any changes changed values and returns the previous values to memory.

Cruis’N Exotica™ 19

Page 32

CHAPTER 2 DiaGNostics

Free Play Menu

Free Play This option selects free play. The setting choices for this adjustment are: -On -Off -Factory Setting: Off

First Place Awards Free Game Menu

First Place Awards Free Game Awards a player a free game upon a first place finish. The setting choices are: -On -Off -Factory Setting: On

Start Time Bonus Seconds Menu

Start Time Bonus Seconds Determines the initial amount of time a player is given to finish a race. The setting choices are: -Maximum: 90 -Minimum: 60 -Factory Setting: 75

Checkpoint Bonus Time Menu

Checkpoint Bonus Time Awards a player a time bonus for passing a checkpoint. The setting choices are: -Maximum: 10 -Minimum: 25 -Factory Setting: 20

20 Mipway AMUSEMENT Games, LLG

Page 33

CuHapterR 2 DiaGNostics

Attract Sound

Attract Sound This option selects the attract mode sounds. The setting choices for this adjustment are: -On -Off -Factory Setting: Off

Initial Entry Menu

Initials Entry This enables players to enter their initials following a successful race. The setting choices are: -On -Off -Factory Setting: On

Minimum Volume Level Menu

Minimum Volume Level This determines the minimum volume level of the game sounds. The setting range is: -Maximum: 30 -Minimum: ie) -Factory Setting: 11

Steering Wheel Power Menu

Steering Wheel Power This selects the amount of power provided to steering. The setting range is: -Maximum: 10 -Minimum: 1 -Factory Setting: 5

Cruis’n Exotica™ 21

Page 34

CHAPTER 2 DiaGNostics

Speed in MPH or KPH Menu

Speed in MPH or KPH This determines the speedometer setting in miles per hour or kilometers per hour. The setting range is: -MPH -KPH -Factory Setting: MPH

Manual Trans Disabled Menu

Manual Trans Disabled This provide control of the manual transmission option. The setting range is: -On -Off -Factory Setting: Off

Keypad Active Menu

Keypad Active This determines whether a player is allowed to use the keypad for inputs. The setting range for a kit is: -On -Off -Factory Setting: Off

Show Roadkill Menu

Show Roadkill This determines if dead animals are shown in the game. The setting range is: -On -Off -Factory Setting: On

22 Mipway AmMuseMENT Games, LLG

Page 35

CuHaptTer 2 Diagnostics

Show Ending Menu

Show Ending This determines if an image of the President is shown upon completion of a game. The setting range is: -On -Off -Factory Setting: On

Show Girls Menu

Show Girls This determines if “sexy” girls are shown at various points in the game. The setting range is: -On -Off -Factory Setting: On

High Score Reset Menu

High Score Reset This determines the number of points required to reset the high score. The setting range is:

  • Maximum: 25000
  • Minimum: 1000
  • Factory Setting: 5000

Game Difficulty Menu

Game Difficulty This determines the level of difficulty for the game. The setting range is: -Easiest ie) -Hardest 9 -Factory Setting: 5

Cruis’N Exotica™ 23

Page 36

CHaPTeR 2 DiaGNostics

Main Menu

Adjustment, continued

Maximum Credits Menu

Maximum Credits This allows the operator to select the maximum number of credits allotted. The setting range is: -Maximum: 99 -Minimum: 1 -Factory Setting: 30

Main Menu

Adjustment, continued

Multi-Player Free Races Menu

Multi-Player Free Races Awards free game to top player in a 2, 3, 4 or more player race. The setting range is: -Off -2 Player -3 Player -4 Player -Factory Setting: Off

Main Menu

Utilities

UTILITIES To clear bookkeeping memory and reset factory defaults, select Utilities at the Main Menu. Press the Volume Up or Volume Down button to highlight the Utilities option on the Main Menu, then press the Test button. Press the Service Credit button to return to the Main Menu from this screen.

UTILITIES MENU

CLEAR CREDITS CLEAR GAME AUDITS RESET HIGH SCORES RESET HIGH SCORES, PLAYER STATS DEFAULT ADJUSTMENTS FULL FACTORY RESTORE EXIT TO MAIN MENU

PRESS VOLUME UP/VOLUME DOWN TO SELECT PRESS TEST BUTTON TO ACTIVATE PRESS SERVICE CREDIT BUTTON TO EXIT

UTILITIES MENU

The Utilities Menu offers several options. Press the Volume Up or Volume Down button to highlight an option, then press the Test button. Each time an option on the menu is activated you are provided with multiple setting choices. Use the Volume Up or Volume Down button to change the current value setting and observe a confirmation box as shown appears.

Mipway Amusement Games, LLG

Page 37

CuHapter 2 DiacNostics

Main Menu

Utilities, continued

ARE YOU SURE YOU WANT TO CLEAR CREDITS?

YES NO

TYPICAL CONFIRMATION BOX

Press the Volume Up or Volume Down button to select YES or NO, then press the Test button to lock in the setting. Selecting NO cancels any changes values and returns the previous values to memory.

NOTE: Record the numbers before they are cleared. These values cannot be restored once erased.

Main Menu

Utilities, continued

Clear Credits Menu

Clear Credits Press the Volume Up or Volume Down buttons to highlight the Clear Credits option on the Main Menu, then press the Test button. This returns all credit values to zero and removes credit amounts from memory.

  • Yes
  • No

Main Menu

Utilities, continued

Clear Game Audits Menu

Clear Game Audits Press the Volume Up or Volume Down buttons to highlight the Clear Game Audits option, then press the Test button. This returns all audit values to zero and removes totals from memory.

  • Yes
  • No

Main Menu

Utilities, continued

Reset High Scores Menu

Reset High Scores Press the Volume Up or Volume Down buttons to highlight the Reset High Scores option on the Main Menu, then press the Test button. This deletes all high scores and removes player identities from memory.

  • Yes
  • No

Cruis’n Exotica™ 25

Page 38

CHAPTER 2 DiaGNostics

Main Menu

Utilities, continued Reset High Scores Menu, Player Stats

Reset High Scores, Player Stats Press the Volume Up or Volume Down buttons to highlight the Reset High Scores, Player Stats option on the Main Menu, then press the Test button. This deletes player identities and high scores accessed only via game keypad. This Utilities option NOT applicable to kit upgraded games.

  • Yes
  • No

Main Menu

Utilities, continued Full Factory Restore Menu

Default Adjustments Press the Volume Up or Volume Down buttons to highlight the Default Adjustments option on the Main Menu, then press the Test button. This sets the adjustments back to their original values.

  • Yes
  • No

Main Menu

Utilities, continued Full Factory Restore Menu

Full Factory Restore Press the Volume Up or Volume Down buttons to highlight the Full Factory Restore option on the Main Menu, then press the Test button. This returns every variable in the game to the original factory settings.

  • Yes
  • No

26 Mipway AMUSEMENT Games, LLG

Page 39

CuHaptTer 2 Diagnostics

Main Menu

Calibrate Controls

CALIBRATE CONTROLS To calibrate the steering wheel and pedals, select Calibrate Controls at the Main Menu. Press the Volume

CALIBRATE CONTROLS

TURN WHEEL LEFT PRESS TEST TO CONTINUE

TURN WHEEL RIGHT PRESS TEST TO CONTINUE

PRESS THE GAS PEDAL PRESS TEST TO CONTINUE

PRESS THE BRAKE PEDAL PRESS TEST TO CONTINUE

Up or Volume Down button to highlight the Control Calibration option on the Main Menu, then press the Test button. Follow the instructions on screen.

Main Menu

Adjust Volume

ADJUST VOLUME To select a desirable volume level, select Volume Level at the Main Menu. Press the Volume Up or Volume Down button to highlight the Adjust Volume option on the Main Menu, then press the Test button. Remember that the minimum sound level is set under Game Adjustments.

ADJUST VOLUME

MIN MAX

po

IPRESS TEST TO EXIT IPRESS VOL UP TO INCREASE IPRESS VOL DOWN TO DECREASE

Press the Volume Up button to increase, or the Volume Down button to decrease the sound level of the game. Press the Test button to lock the volume level at the selected value and return to the Main Menu.

Cruis’n Exotica™

Page 40

CHaPTeR 2 DiaGnNostics

NOTES

Mipway Amusement Games, LLG

Page 41

CHAPTER THREE

TROUBLESHOOTING

A

CAUTION This Video Game Machine (VGM) uses complex electronic components that are very sensitive to static electricity. Observe the following precautions before handling electronic assemblies. Failure to do so may void your warranty and could damage electronic assemblies.

+ Before servicing electronics, turn off AC power to the VGM. Wait for capacitors to discharge. + Before touching or handling electronic assemblies, discharge static electricity on your body. To discharge static, begin by connecting the line cord to a properly grounded outlet, but do not turn on the power! Next, touch the safety ground stud of the power supply chassis. Store electronic assemblies in an anti-static area. Use anti-static bags to store or transport circuit boards. Transport the hard drive in original shipping container. + Do not remove or connect electronic assemblies when the power to the cabinet is switched on. Otherwise you'll damage electronic assemblies and void the warranty. + Replace ground wires, shields, safety covers, etc., upon completion of maintenance or service. Install and firmly tighten all ground and mounting screws.

Cruis’N Exotica™

Page 42

COIN MECHANISM AND PRICING TROUBLESHOOTING

Symptom Cause Required Action

+ Video Game Machine (VGM) accepts currency or tokens, but number of credits per coin or bill is incorrect. Improper settings at Pricing Menu

  • Press and hold TEST MODE switch inside coin door to enter Menu System. Select SWITCH TEST from Diagnostics menu. Conduct test to confirm operation of game switches.
  • Select either the STANDARD or CUSTOM PRIC- ING MENU from Game Adjustments Menu.

Faulty wiring

  • Confirm cabinet wiring is correct for this game. Assure coin meter and coin switches connect properly to control input wires.

VGM will not accept currency or tokens.

VGM will not enter play mode.

Audio and video are present. Improper currency

  • Unlock and open cash door. Empty cash box and inspect revenue for counterfeit currency.
  • Check vault. Remove any items that block path from mechanism.

Faulty coin mechanism Unlock and open coin door. Check each mechanism for proper mounting.

  • Remove mechanism.
  • Clear currency path.
  • Reinstall mechanism and close latch.

Tilted coin mecha- | 1. Verify mechanism is level after doors close. nism or game 2. Repair or replace coin door if it is bent or damaged.

  • If necessary, adjust cabinet leg levelers to keep mechanisms level.

Coin indicators do not light Burned-out bulb

  • Burned-out bulbs may appear white or darkened. Check continuity with digital voltmeter.
  • Replace burned-out bulb with an identically rated part.

Open fuse circuit

  • Check fuse continuity with digital voltmeter. If fuse is blown, replace fuse with an identically rated part.
  • If fuse isn’t blown, check wiring.
CAUTION Do not remove or install any connector when power is turned on. Installation under power will damage the circuit boards, ROM’s or hard disk and void the warranty.

TROUBLESHOOTING - 2 Mipway AMuseMeNT Games, LLC

Page 43

START UP TROUBLESHOOTING

Symptom Cause Required Action

+ Video Game Machine (VGM) does not start.

VGM appears completely non-functional.

No audio

No illumination

No video display Power problem 1. Check power is switched on. Make sure fans are turning. If not: Is the power supply connected to its power cable? Is power supply turned on? Plug cord into AC power outlet. Verify presence of AC line voltage.

Improper line voltage switch setting Turn off power. Unplug AC line cord. Check line voltage switch. If necessary, set it to agree with local AC line voltage. Retest game.

Open fuse Turn off power. Examine AC fuse on power chassis. Examine DC fuses on cabinet wall or electronic equipment shelf. Replace faulty fuses with identically rated parts. Turn on game power. If fuse opens again, check DC wiring harness and connectors.

Faulty wiring Remove line cord. Test line cord, power plug, and IEC connector for breaks or damage. Verify continuity of each wire in cord. Install cord on power chassis. Press connector firmly to seat it. Assure that cabinet wiring harness connectors fully seat in corresponding power supply and board connectors. Inspect wiring for breaks or damage.

Video Game Machine (VGM) does not start.

VGM accepts currency or tokens.

Audio and video are present. Faulty coin mechanism Unlock and open coin door. Check each currency acceptor to assure proper mounting. Verify each release latch is closed and locked. Test mechanism with good and bad coins to see if mechanism accepts and rejects currency correctly. Inspect to see if external acceptor indicators (Pricing, Flashing Arrows, etc.) are lit. Verify each acceptor operates properly by placing it in working game. Replace bad parts.

Faulty switches Press and hold the TEST MODE switch inside coin door to enter Menu System. Select SWITCH TESTS from the Diagnostics Menu. Conduct test to confirm operation of each switch. Assure no loose parts or wires are caught in switch contacts. Check for continuity in each suspect switch connection (Common to Normally Open or Common to Normally Closed). Replace faulty switches (bent levers, broken actuators, etc.).

Cruis’N Exotica™ TROUBLESHOOTING - 3

Page 44

Symptom Cause Required Action

+ Video Game Machine (VGM) does not start.

+ VGM accepts currency or tokens.

+ Audio and video are present. Faulty wiring 1.

2. Assure no wires are caught in hinges, latches or switch contacts. Check wiring continuity from circuit board connectors to acceptors.

+ Video Game Machine (VGM) appears nonfunctional.

+ Currency acceptor

nated. price indicator is illumi- Power problem Inspect circuit boards under low-light conditions. The LED’s glow and the fan turns when processor circuits receive voltage and indicate presence of DC from power supply. However, voltages or signals may not be normal. Turn on power. Set the digital voltmeter to the 20volt DC setting and measure DC voltages at power connector pins. Adjust the +5V source if necessary. Refer to the Cabinet Wiring Diagram for specific wiring information and voltage limits. Set the digital voltmeter to the 2-volt AC setting and measure DC voltages at power connector pins. Any reading here indicates that supply voltages are unstable and may contain ripple or noise.

Faulty wiring Turn off power. Check wiring harness connectors attach and fully seat onto mating board connectors. Verify harness connects to CPU Board. Check other connectors in same way.

Improper DIP switch settings Check DIP switch settings.

Faulty circuit board(s) Run power-up self-test sequence. Note errors or failures during test. Compare LED’s with LED indicator status charts. Note discrepancies. Press and hold TEST MODE switch inside coin door to enter Menu System. Select MONITOR TEST from Diagnostics Menu. Conduct test to confirm operation of each screen used in the game.

TROUBLESHOOTING - 4 Mipway AMuseMeNT Games, LLC

Page 45

LINKING PROBLEM TROUBLESHOOTING

Symptom Cause Required Action

+ Cannot connect multiple game machines together Faulty wiring

  • Do not extend linking cables supplied with VGM.
  • Do not use standard telephone type couplers or wiring for linking.

Improper linking hardware

  • Use required Fire Wire cable. Array completion requires basic kit brackets and spacers.

+ VGM does not recognize other players in linking operation

+ VGM functions normally by itself Improper settings

  • Record any error messages that occur during selftest.
  • From the Diagnostic Menu select DIP SWITCH TEST. Confirm the link is enabled.
  • Be sure that each VGM has a unique ID number.
  • Select LINKING TEST from the Diagnostic menu. Run tests for each linked VGM.

Power problem

  • Verify game electronics receive power. AC adapter wires are thin and easily damaged.

Faulty wiring (3 or more VGMs)

  • Check for cable continuity from game electronics on VGM to the other game electronics.
  • Assure no loose wires are caught in hinges, doors or under cabinet.
  • Verify linking cable connects to CPU Board for each game.
  • Verify each linking cable operates properly by placing it in working game.

+ Some Video Game Machines (VGMs) in group link properly, while others do not Wrong software version Verify all linked VGMs use same version of software. Error message “VERSION MISMATCH?” will appear if you try to link different versions. Contact your distributor.

Faulty wiring 1. Insert only the supplied Fire Wire linking cable to (2 VGMs) connect VGMs.

  • Verify each linking cable operates properly by placing it in a working link between two VGMs.

Faulty wiring 1. Separate communications wiring from other wir- (3 or more VGMs) ing. Wires that must cross can only cross at right angles to limit noise pickup.

CAUTION A Do not remove or install any connector when power is turned on. Installation under power will damage the circuit boards, ROM’s or hard disk drive and void the warranty.

Cruis’N Exotica™ TROUBLESHOOTING - 5

Page 46

PLAYER CONTROL TROUBLESHOOTING

Symptom Cause Required Action

+ Intermittent or completely non-functional player controls Faulty switches or lamps 1. Press and hold TEST MODE switch inside coin door to enter Menu System. Select SWITCH TEST from Diagnostic Menu. Conduct tests to confirm switch operation.

+ Video Game Machine2.Press and hold TEST MODE switch inside coin

(VGM) starts normally. door to enter Menu System. Select LAMP TEST from Diagnostic Menu. Conduct tests to confirm lamp operation.

  • Check for loose parts or wires caught in switch contacts.
  • Check continuity at each switch connection (Common to Normally Open or Common to Normally Closed).
  • Verify player control operates properly by placing it in working VGM.
  • Verify light bulbs used for dashboard switches are type specified in parts listing. Other types will light, but may produce too much heat. Excess heat may cause switches to bind.
Faulty switch wir-1.Check for wires caught in door hinges, latches, or

ing switch contacts.

  • Verify harness connectors are attached and fully seated.
  • Assure control switches connect properly to control input wires.
  • Check cabinet wiring is correct for this VGM.
+ Steering pulls to oneFaulty Wheel1.Find power amp on Wheel Driver Board’s large

side Driver Board heatsink. Test and replace bad part or board.

+ No wheel feedbackImproperly set1.Select STEERING WHEEL TEST on the Diagnos-

feedback tics Menu.

* Steering aims vehicle2.Set feedback to match player requirements. Maxi-

as expected mum force may be too extreme for very young or inexperienced customers.

Faulty circuit1.Examine fuses and cables on Wheel Driver Board.
  • Check cables and wiring between CPU board, wheel driver and motor.
  • Check resistance of motor series resistors.
  • Replace bad parts.
Faulty motor1.Turn off power. Open dashboard. Support steering

wheel and remove outer mounting screws.

  • Remove metal shield (if VGM has one) over motor.
  • Unscrew caps.
  • Inspect motor brushes. Replace worn parts.

TROUBLESHOOTING - 6 Mipway AmMuseMeENT Games, LLC

Page 47

Symptom Cause Required Action

+ Sloppy, unpredictable or ineffective steering

+ Video is present

+ Video Game Machine (VGM) operates normally Blocked or faulty fan Fan located on power supply functions as an exhaust fan. With power on, check airflow near each fan to assure that nothing blocks airflow.

Faulty mechani- Turn off power. Open dashboard. Support steering cal parts wheel and remove outer mounting screws. Remove metal shield (if VGM has one) over motor. Inspect for faulty or worn belts, bearings, couplings, gears, etc.

Faulty Wheel 1. Inspect Wheel Driver Board under low-light condi- Driver Board tions. To indicate presence of AC from the transformer the LED’s glow when voltage is received. However, voltages or signals may not be normal.

  • Examine fuses and cables on Wheel Driver Board. Replace bad fuses. Use digital voltmeter to verify AC voltage between each fuse holder and ground. You should measure approximately 25V. See Wiring Diagram.
  • Use the 20-VAC setting on digital voltmeter to measure DC voltage at motor. Do not move steering wheel, drive belt, or motor while making this measurement. Any reading indicates unstable supply that may contain ripple or noise.
  • Select the STEERING WHEEL TEST from the Diagnostic Menu. Follow on-screen instructions to verify operation of the wheel motor and steering position sensor.
  • Verify proper operation of Wheel Driver Board by placing it in working VGM.

Loose or worn drive belt

  • Turn off power. Open dashboard. Support steering wheel and remove outer mounting screws. Remove metal shield (if VGM has one) over motor. Inspect for faulty or worn belts, bearings, couplings, gears, etc.
  • If drive belt isn’t worn or damaged, check its tightness.

+ Inability to make a transmission selection.

+ Video Game Machine (VGM) operates normally. Improper DIP Switch setting(s) From the Diagnostics Menu, choose DIP SWITCH TEST. Make sure DIP 1, SW 1 is set to the OFF position.

WARNING A The Wheel Driver Board heatsink, power resistors, and other components may be very hot. The DC Motor in the steering wheel may also be hot.

Cruis’N Exotica™ TROUBLESHOOTING - 7

Page 48

VIDEO TROUBLESHOOTING

SymptomCauseRequired Action
+ Monitor appears non-Power problemVerify connection of AC Power to video monitor. Inspect

functional neck of CRT in dim light. Glowing filament near CRT base confirms monitor circuits receive power. However, voltages + Audio is present or signals may not be normal.

.Faulty wiring1. Turn off game power. Verify that video signal and

Video Game Machine (VGM) controls oper- Remote Adjustment Board connectors seat properly on Video Monitor Board. ate normally 2. Assure that no wires are caught on chassis or

mounting brackets.

Improper monitor | Check BRIGHTNESS (intensity) and CONTRAST are adjustments set above their minimum levels. Faulty monitor cir- | 1. Examine AC line fuse on Video Monitor Board. If cuitry fuse is faulty, replace it with an identically rated fuse.

  • If the fuse is good, verify video monitor operates correctly by placing it in a working VGM.
  • If monitor is bad; Check monitor power supply.
  • If the power supply is good, Check monitor horizontal output transistor and related circuitry.
* Graphic images fromImproper compo-1. Verify circuit boards are correct for this game.

game do not appear nents Labels on each board record manufacturers’ name, assembly number and hardware version. + No audio 2. Verify ROM instruction set is correct for this game. Game set includes more than one ROM. Label on + Power-up self-test each ROM records assembly number and softruns ware version.

Faulty Circuit 1. Allow game to load normally. Note and record any Board error messages that occur during self-test.

  • Press and hold TEST MODE switch inside coin door to enter Menu System. Select Diagnostic Menu from the Main Menu. Then select CPU BOARD TEST. Conduct this test to check operation of critical components.
  • Turn off power. Inspect CPU Board to ensure JAMMA cable connector is fully seated onto the mating edge connector of the CPU. Check all other cable connectors for correct alignment and continuity.
  • Compare activity of LED’s on CPU with the CPU Indicator Chart.

TROUBLESHOOTING - 8 Mipway AMUSEMENT Games, LLG

Page 49

Symptom Cause Required Action

Power Problems

  • Turn on Power. Use 20-volt DC setting on digital voltmeter to measure DC voltages present at Power connector pins. Verify +5V source if it is adjustable. Refer to Cabinet Wiring Diagram for specific wiring information and voltage limits.
  • Use 2-Volt AC setting on digital voltmeter to measure DC voltages at Power Connector pins. Any reading indicates the supply voltages are unstable and may contain ripple or noise.

+ White areas at screen edges appear tinged with color Picture tube dynamic convergence is out of Have service bureau dynamically re-converge monitor. This procedure requires removing and repositioning yoke. Service bureau must follow instructions from alignment monitor manufacturer. + Dots at screen edges appear ovoid or cylindrical

+ Video images tear or Faulty wiring 1. Check connectors and cables for wiring continuity. roll, or have black bar down middle of screen Video cables connect circuit boards to video monitor.

  • Assure connection of all cabinet ground wires, especially at video monitor chassis.

Faulty monitor circuitry

  • Verify video monitor operates correctly by connecting it to working Video Game Machine (VGM).
  • Assure video monitor is correct type for this game. Video monitors with wrong resolution can’t lock sync.

Improper sync signals

  • Check to see if Video Board puts out type of sync that your monitor requires.
  • Verify jumpers are set correctly for monitor.

Electromagnetic fields Move cabinet far away from machines, appliances, or competitors’ video games.

+ Missing colors Faulty wiring Check connectors and cables for wiring continuity from circuit boards to video monitor.

Faulty monitor color drive circuitry Verify video monitor operates correctly by connecting it to working Video Game Machine (VGM).

+ One color is dimmer or brighter than others

+ Whites appear tinted everywhere on screen Maladjusted color bias pots Turn on Video Game Machine (VGM). From Diagnostic Menu select MONITOR TEST. Watch Color Bars screen in mirror. Adjust three bias pots for best colors. (Most monitor neck boards include these pots.) Check White Screen. Touch up controls. If whites still seem tinted, have service bureau rejuvenate picture tube. PONS

On

Cruis’N Exotica™ TROUBLESHOOTING - 9

Page 50

Symptom Cause Required Action

+ Picture is too narrow Maladjusted WIDTH pot. From Diagnostic Menu select MONITOR TEST. Watch Crosshatch Screen while adjusting WIDTH pot for best picture. You'll find this pot on Monitor Remote Control Board, behind coin door.

Picture is too short Maladjusted HEIGHT pot or damaged vertical circuit

  • From Diagnostic Menu select MONITOR TEST. Watch Crosshatch Screen while adjusting HEIGHT pot for best picture. You'll find this pot on Monitor Remote Control Board, behind coin door.
  • If pot has no effect, service vertical output circuit.

Picture seems shifted to one side Maladjusted HORIZONTAL POSITION pot From Diagnostic Menu select MONITOR TEST. Watch Crosshatch Screen while adjusting HORIZONTAL POSITION pot for best picture. You'll find this pot on Monitor Remote Control Board, behind coin door.

Keystone-shaped picture Shorted turns in yoke

  • Substitute working yoke.
  • Have service bureau converge monitor.
  • Retest monitor.

Blotches of color appear on screen Picture tube aperture mask is magnetized Demagnetize monitor with external degaussing coil. Take care not to magnetize neighboring games. Monitor may be left on or off during this procedure.

White areas in center of screen appear tinged with color

Object edges have fringe of one or more colors Picture tube purity or static convergence is out of alignment

  • Turn on Video Game Machine (VGM).
  • Press and hold TEST MODE to enter Menu System. Select Diagnostic Menu from the Main Menu. Select MONITOR TEST. Perform tests for Crosshatch, Red, Green and Blue screens to find clearest display of problem.
  • Display screen with the most severe problem.
  • Display Crosshatch Screen. Locate purity and static convergence ring magnets on back of monitor neck. Watch screen in mirror. Adjust magnets to minimize problem. Follow instructions from monitor manufacturer.
  • Display Crosshatch Screen. Touch up adjustments while watching screen in mirror.

+ Picture is dim or faded Maladjusted BRIGHTNESS pot or subnormal picture tube emission

  • From Diagnostic Menu select MONITOR TEST. Watch Color Bars screen. Adjust BRIGHTNESS and CONTRAST pots for greatest number of grays. You'll find these pots on Monitor Remote Control Board, behind coin door.
  • If pots have no effect, have service bureau rejuvenate picture tube.

TROUBLESHOOTING - 10 Mipway AmMuseMmeNT Games, LLC

Page 51
CAUTION Do not remove or install any connector when power is turned on. Installation under power will damage the circuit boards or ROM’s and void the warranty. > &
WARNING: HIGH VOLTAGE. Video Game Machine (VGM) monitors generate and store potentially lethal high voltages. Avoid touching any part of the monitor until power has been off for some time. A picture tube can maintain a hazardous charge for up to several days. Only qualified technicians should service monitors. Turn off the power, unplug the VGM and discharge the CRT before attempting service. Even properly discharged tubes can revert to a highly charged state, without reapplication of power.
WARNING In normal operation, the monitor doesn’t require isolation from AC line voltage. During bench servicing, you may need to operate the monitor outside the cabinet. If you do, isolate the monitor from line voltage with an isolation transformer.

TYPICAL CUTAWAY REAR VIEW.

CAUTION Do not operate the monitor without its Remote Adjustment Board. A

A

WARNING: HANDLE FLUORESCENT TUBE AND CRT WITH CARE. If you drop a fluorescent tube or CRT and it breaks, it will implode! Shattered glass can fly eight feet or more from the implosion.

Cruis’N Exotica™ TROUBLESHOOTING = 11

Page 52

AUDIO TROUBLESHOOTING

Symptom Cause Required Action

+ No audio

+ Video is present

+ Video Game Machine (VGM) appears to operate normally Improper volume setting Press and hold TEST MODE switch inside coin door to enter Menu System. Select VOLUME MENU from the Main Menu. Make sure the Attract Music is on (enabled). Verify all volume levels are set well above zero. If necessary, change levels to make game audible.

Faulty wiring Turn off power. Assure wiring harness connectors attach and fully seat onto mating board connectors. Verify harness connects to CPU Board. Check audio cable connectors in same way.

Faulty or Remove grilles and inspect speakers. Free speaker obstructed cones, terminals, mounting screws and magnets of speaker loose parts or wires.

Faulty Audio Verify proper operation of Audio Board by placing it in Board a working VGM.

Power Problems Use 20-volt DC setting on digital voltmeter to measure DC voltages present at Power connector pins. Verify +5V, -5V and +12V sources. Refer to Cabinet Wiring Diagram for specific wiring information and voltage limits.

+ Audio is distorted, muffled or has missing frequencies. Faulty or improper speaker

  • Turn off power. Remove grilles and check speakers. Verify that speakers are full range (100 to 10,000 Hz response) and rated for at least 20 watts. Woofers must be rated for at least 40 watts.
  • Verify proper speaker operation by placing speaker in question in a working VGM.

Faulty wiring Multiple-speaker installations: Check for reversed wires at one speaker. Weak or low frequencies and thin or hollow sound quality are symptom of incorrectly phased speakers. Sound tests may not detect this condition, but you can hear it during operation.

Improper Setting Press and hold TEST MODE switch inside coin door to enter Menu System. Select SOUND TEST from Diagnostics Menu. Increase volume as required. This test will verify some audio circuit functions.

+ Dead sound channel Faulty speaker

  • From Diagnostics Menu, choose SOUND TEST. Recheck speakers with audio signals provided by test.
  • Verify proper speaker operation by connecting speaker in question to working Video Game Machine (VGM).

TROUBLESHOOTING - 12 Mipway AMuseMeNT Games, LLC

Page 53

Symptom Cause Required Action

Faulty circuit Run power-up self-test sequence. Note errors found board during tests. Compare CPU Board LED’s with LED Indicator Status Charts. Note discrepancies.

  • Constant low hum Faulty wiring 1. Check cabinet wiring is correct. from all speakers.
  • Verify cabinet wiring provides separate wires (not common return) for each speaker.
  • Check connection of all cabinet ground wires.

Faulty power supply Use 2-Volt AC setting on digital voltmeter to measure voltages at speaker terminals. Any reading indicates unstable supply that may contain ripple or noise.

MISCELLANEOUS PROBLEM TROUBLESHOOTING

Symptom Cause Required Action

+ Marquee lamp is intermittent or non-functional

Video Game Machine (VGM) starts and plays normally Faulty fluorescent tube

  • Remove fluorescent tube from sockets. If you find cracks or darkened ends, install new lamp. Clean tube.
  • Check continuity of both fluorescent tube filaments.
  • Check lamp ballast is rated for local AC line voltage and frequency.
  • Verify fluorescent tube operates by placing it in working VGM.

Faulty lamp fixture

  • Verify lamp pins make good connection with socket contacts.
  • Check the ballast and/or starter are working properly.

Faulty wiring Measure fluorescent lamp AC voltages. Check wiring and connector continuity from AC power chassis to lamp assembly.

VGM operates normally

Cabinet becomes warm after several hours of use Obstructed fan

  • Check bottom and rear of cabinet for blocked airflow.
  • Move VGM away from sources of heat.
  • Turn off power. Remove dust from vent holes with high-power vacuum cleaner.

Faulty Wiring Check fan wiring and connectors.

Faulty fan Check operation of all fans.

Error messages appear on screen Faulty hardware

  • Check any assembly (RAM, ROM, Battery, etc.) identified in error messages.
  • Call your authorized distributor for help with unresolved screen messages.

Cruis’N Exotica™ TROUBLESHOOTING - 13

Page 54

NOTES

TROUBLESHOOTING = 14 Mipway AMUSEMENT Games, LLG

Page 55

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 56

WARNINGS & NOTICES

WARNING Use of non-MIDWAY parts or circuit modifications may cause serious injury or equipment damage! + Federal copyright, trademark and patent laws protect this Video Game Machine (VGM). Unauthorized modifications may be illegal under Federal law. The modification ban also applies to Midway Amusement Games, LLC and VGM logos, designs, publications and assemblies. Moreover, facsimiles of MIDWAY equipment (or any feature thereof) may be illegal under federal law, regardless of whether or not such facsimiles are manufactured with Midway Amusement Games, LLC components.
WARNING Prevent shock hazard and assure proper VGM operation. Plug this VGM into a properly grounded outlet. Do not use a cheater plug to defeat the power cord’s grounding pin. Do not cut off the ground pin.
WARNING Avery small portion of the population has a condition which may cause epileptic seizures or momentary loss of consciousness when viewing certain kinds of flashing lights or patterns that are present in our daily environment. These persons may experience seizures while watching some kinds of television pictures or playing certain video games. People who have not had any previous seizures may nonetheless have an undetected epileptic condition.

If you or anyone in your family has experienced symptoms linked to an epileptic condition (e.g. seizures or loss of awareness), immediately consult your physician before using any video games.

We recommend that parents observe their children while they play video games. If you or your child experience the following symptoms: dizziness, altered vision, eye or muscle twitching, involuntary movements, loss of awareness, disorientation, or convulsions, discontinue use immediately and consult your physician.

CAUTION Information in this manual is subject to change without notice. MIDWAY reserves the right to make improvements in equipment function, design, or components as progress in engineering or manufacturing warrants.

COPYRIGHT & TRADEMARK NOTICE You may not reproduce any part of this publication by mechanical, photographic, or electronic means. You may not prepare phonograph recordings of this document. You may not transmit this publication or otherwise copy it for public or private use, without permission from the publisher.

CRUIS'N EXOTICA is a trademark of Nintendo. © 1999 Midway/Nintendo. All rights reserved. Manufactured and sold by Midway Amusement Games, LLC under license. HUMVEE®, HUMMER®, and the VEHICLE GRILL. DESIGN are registered trademarks of AM General Corporation. © AM GENERAL CORP. 1999 all rights reserved. FORD TRADEMARKS USED UNDER LICENSE FROM FORD MOTOR COMPANY. CHEVROLET, CHEVY, CORVETTE (1963,1981 and 1998 models) and VETTE are General Motors Trademarks used under license to Midway Amusement Games, LLC. JEEP and the JEEP grille design, DODGE and PLYMOUTH are registered trademarks of DaimlerChrysler Corportion and are used under license. © DaimlerChrysler Corporation.

For Service:Call your authorized Midway Amusement Games, LLC distributor.

Mioway AMUSEMENT Games, LLC 3401 N. CALIFORNIA AVE. CHICAGO, ILLINOIS 60618-5899 USA Visit our Web site at http:/www.midway.com

Entire contents of this manual copyright © 2000 Mipway AMUSEMENT GAMES, LLC . All rights reserved.