Dark Stalkers
Dark Stalkers (Capcom) · Manual · 16 pages · 17 sections · original scan
DarkBiathers
MANUAL
WARNING
This game is for use in the United States of America and Canada. Sales, export or operation outside of these countries may be construed as copyright and trademark infringements and is strictly prohibited. Violators are subject to severe penalties and will be prosecuted to the full extent of the law.
® 19-0017
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
THIS GAME MUST BE GROUNDED. FAILURE TO DO SO MAY RESULT IN DESTRUCTION TO ELECTRONIC COMPONENTS.
"WINNERS DON'T USE DRUGS"
Louis Freeh, Director, FBI
+ IN COOPERATION WITH THE AAMA AND FBI ANTI-DRUG CAMPAIGN +
CAPCOM INVITES YOU TO USE
OUR SERVICE NUMBER FOR SERVICE INFORMATION CONCERNING THIS GAME, OR ANY OTHER CAPCOM GAME YOU NOW HAVE ON LOCATION. PLEASE HAVE GAME SERIAL NUMBERS AND CABINET NUMBERS READY.
CALL US FOR PROMPT, COURTEOUS ANSWERS TO YOUR PROBLEMS
ANSWERS TO YOUR PROBLEMS.
DIRECT NUMBER _ 1-800-833-0190
CAUTION
Please keep the following instructions to keep the PC board in good condition
Do not block the ventilation slots.
Do not drop or bump the board.
Do not spill any liquids on the case.
Do not disassemble the case.
ATTENTION
battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste system. Check with your local solid waste official for details in your area for recycling options or proper disposal. w » The product that you have purchased contains a rechargeable battery. The
DISASSEMBLING THE CASE OR REMOVING THE STICKER MAY CAUSE THE TERMINATION OF YOUR REPAIR WARRANTY.
PARTS LIST
There are two different kits available for Darkstalker. The first kit below is the full kit which includes PCB, all necessary graphics, buttons, joysticks and a volume/test bracket. This kit is used for a cabinet that will be upgraded with the CPS II board for the first time. The second kit is called the "B" Kit. This kit is for any that already uses the CPS II board (Super Street Fighter II). This kit includes the "B" board, all necessary graphics and volume/test bracket. You just remove the top cartridge off the motherboard and replace with the new cartridge.
DK1000 Darkstalker Kit
Part No. Description Qty.
| DK1400 | Darkstalker PCB | 1 |
| 06-0074 | Blue Overlay | 1 |
| 06-0095 | Darkstalker Marquee | 1 |
| GE1200 | Monitor Card | 1 |
| 16-0130 | 1 Player Button | 1 |
| 16-0131 | 2 Player Button | 1 |
| 16-0133 | Red Button | 4 |
| 16-0136 | Green Button | 4 |
| 16-0134 | Blue Button | 4 |
| GE2030 | Joystick | 2 |
| 06-0066 | Side Graphics | 2 |
| 03-0050 | Volume/Test Bracket | 1 |
| 19-0017 | Darkstalker Manual | 1 |
| 06-0075-01 | Instruction Decal, Right | 1 |
| 06-0075-02 | Instruction Decal, Left | 1 |
DK1000B Darkstalker B Kit
Part No. Description Qty.
| DK1400B | Darkstalker "B" Board | 1 |
| 06-0074 | Blue Overlay | 1 |
| 06-0095 | Darkstalker Marquee | 1 |
| 06-0075-01 | Instruction Decal, Right | 1 |
| 06-0075-02 | Instruction Decal, Left | 1 |
19-0017 Darkstalker Manual
CONTROL LOCATIONS
- SAMPLE CONTROL PANEL LAYOUT nt eo _
a
- VOLUME AND TEST CONTROL SWITCHES ON BOARD
The volume of this unit can be adjusted by pressing the volume-up switch and the volume-down switch. The setting you have selected will be stored even if the power is turned off. In the event that the volume setting does not work properly, press down on either the volume-up or the volume down button for at least five seconds, then set the volume again.
TEST SWITCH VOLUME-UP SWITCH ‘(VOLUME-DOWN SWITCH
- VOLUME AND TEST CONTROL BRACKET To be mounted on top of the coin box. (Not included in "B" kit)
SERVICE
CONNECTORS
| . | JAMMA: | JAMMA 56-pin connector |
| . | OPTION: | Player 3 and Player 4 Interface |
| . | AUDIO OUT: | Used only for CAPCOM QSOUND cabinet |
| . | REGISTER: | Optional I/O connector for register |
JAMMA CONNECTOR OPTION CONNECTOR
SOLDER SIDE COMPONENT SIDE GND 34 BLACK
| GND | A | 1 | GND | 1P LIGHT KICK | 19 | | SKYBLUE 4 | —__J |
| GND | B | 2 | GND | 1P MIDDLE KICK | 17 | 2B —__9——o—_ | ||
| +5V | C} | 3 | 4+5V | 1P HEAVY KICK | 15 | | BNK——_G——G J |
| +5V |] D| | 4 | 45V | stack |
Nc. | E | 5 | NC. GND | 33. | ACK ——_______
| +12V | F ) 6 | +12V | 2PLIGHTKICK | 21 | | S&S o—~o-—_} | |
| H| | 7 | 2PMIDDLEKICK | 23 | | PAMYR O—~So—_ |
| N.c. | J | 8 | COUNTERI | oP HEAVY KICK | 9 | PURPLEAYEL ———~G_ |
LOCK OUT2 | K | 9 | LOCKOUT1 SPEAKER (-) | L | 10 | SPEAKER (+) Nc. | Mj i | NC VOLUME UP | 29 | SRAYEL G6 —o
| VIDEO GREEN | N | 12 | VIDEORED | VOLUME DOWN | 30 | | BNkAEL _—S_——6_ |
VIDEO SYNC | P | 13 | VIDEO BLUE VOLUMECOMMON | 31 | BEACKwHrrE FREECREDIT | R | 14 | VIDEOGND N.c. | S | 15 | DIAGNOSTICS 2PCOIN | T | 16 | IPCOIN 2PSTART | U | 17 | IPSTART 2PuUP | V | 18 | 1PUP 2P DOWN | W | 19 | 1PDOWN m m 2PLEFT | X | 20 | IPLEFT 33 | DODoOOOoooooo000000 2PRIGHT | Y | 21 | IPRIGHT 2P LIGHT PUNCH | Z | 22 | IP LIGHT PUNCH 34 | DOOOoOooCoooooooK | 2 2P MIDDLE PUNCH | a | 23 | 1P MIDDLE PUNCH 2P HEAVY PUNCH | b | 24 | 1PHEAVY PUNCH Nc. ] ¢ | 25 | NC ‘i ne | @|2%)Ne Harness Side GND | © | 27 | GND GND |_f | 28 | GND Note: The harness provided with this kit is fully stuffed with wires. Only the wiring above is required for use with the Darkstalker game. If you are converting from a Super Street Fighter or Super Street Fighter Turbo, you can use the existing harness in the game.
CONNECTOR LOCATIONS
AUDIO OUT (FOR QSOUND) (RIGHT: RED, LEFT: WHITE)
JAMMA OPTION CONNECTOR
TEST MENU
The test menu allows you to test the functions and controls of the game. These items include input devices such as joysticks, buttons and coin mechs, output devices such as monitor, speakers and meters. Through the Test Menu you can also access the Configuration Menu, where you can change the settings of the game.
- ACCESSING THE TEST MENU
. For a CAPCOM cabinet, or a cabinet equipped with a test switch: Turn on the main switch, then push the test switch. The screen shown below will appear. . For a cabinet without a test switch: Push the test switch on the side of the blue plastic electronic casing. Refer to the Controls Section of the manual.
INPUT
OUTPUT SOUND & VOICE
COLOR
DOT CROSS HATCH SYSTEM CONFIGURATION OBJECT
SCROLL 1
SCROLL 2
SCROLL 3 MEMORY CHECK
> 1.
2.
3.
4.
5.
6.
7.
8.
- HOWTO SELECT AN ITEM
. Use the Player 1 Joystick to Move the arrow in front of the desired item and press the Player 1 PUNCH LIGHT button. . To return to the test menu, push the Player 1 Start and Player 2 Start Buttons simultaneously. The test menu automatically appears: . After you exit the "6. SYSTEM CONFIGURATION MENU". . After the memory is tested on the menu of "11. MEMORY CHECK".
- CLOSING THE TEST MENU
To close the Test Menu, highlight "12, EXIT" and push the Player 1 LIGHT PUNCH button.
- TEST MENU ITEM DESCRIPTIONS
Used to test all the input switches. INPUT "1" appears when the switches are depressed. Check connections and switches in case "0" appears when swithces are depressed.
OUTPUT Used to test the coin meter and the coin lock
Select a code of SOUND or VOICE with the Player 1 Joystick. SOUND & VOICE Push the Player 1 A (LIGHT PUNCH) button to hear the sound of the selecteq code, then adjust the volume.
Shows color bars of red, green, blue and white. COLOR Adjust RGB and brightness to obtain the optimum color balance and solid black background.
DOT CROSS HATCH Used to test the screen size, focus and distortion.
CONFIGURATION Used to change the game play settings. Refer to the CONFIGURATION
MENU setion.
OBJECT/SCROLLS Used to check all the characters of the game.
Used to test memory. MEMORY. CHECK "OK" appears when each block of memory passes test "ERROR" appears in case of malfunction. If "ERROR" appear, repeat the memory test. Contact your distributor if "ERROR" still appears.
en Select this item and push the Player 1 (Light Punch) button to return to game play mode.
SYSTEM CONFIGURATION MENU
- TO OPEN THE MENU
From the Test Menu, move the A character to "6. SYSTEM CONFIGURATION" and push the Player 1 LIGHT PUNCH button. The screen below will be displayed.
COIN
GAME DIFFICULTY DAMAGE LEVEL TIME COUNT SPEED SOUND DEMO SOUND CONITINE START MODE MONITOR FLIP MAX ROUND REULATION GAME SPEED FREE PLAY FACTORY SETTING EXIT 1COIN 1CREDIT
4 MEDIUM 5 MEDIUM NORMAL COUNT DOWN STEREO OFF ON OFF OFF 3 ROUNDS OFF FREE SELECT OFF
- CHANGING THE CONFIGURATION SETTINGS
Move the Player 1 Joystick UP or DOWN to highlight the desired option. Once the option is highlighted, move the Joystick LEFT or RIGHT to change the setting. Refer to the menu on the next page for option settings.
- | SAVING SETTINGS AND CLOSING THE MENU Once the configuration settings are changed, save the new settings by selecting "EXIT" and pushing the Player 1 START button. A message "SAVING NEW CONFIGURATION IN EEPROM" appears while new settings are being saved. It takes one or two seconds to save the new settings. Do not turn off the power switch while saving is in process.
4. SYSTEM CONFIGURATION MENU OPTIONS
| 1 COIN | 1 COIN | 1 COIN | 1 COIN | 1 COIN |
1CREDIT | 2CREDITS | 3CREDITS | 4CREDITS | 5CREDITS
| 1 COIN | 1 COIN | 1 COIN | 1 COIN | 2 COINS |
| 6CREDITS | | 7CREDITS | | 8CREDITS | | 2CREDIT | 1 CREDIT |
COIN
| 3 COINS | 4 COINS | 5 COINS | 6 COINS | 7 COINS |
| 1 CREDIT | 1 CREDIT | 1 CREDIT | 1 CREDIT | 1 CREDIT |
8 COINS 9 COINS 1 CREDIT 1 CREDIT
| 1 | 2 | 3 | 4 | LEVEL 5 |
| EASIEST | | VERY EASY | EASY | MEDIUM | MEDIUM HARD |
GAME DIFFICULTY
| LEVEL 6 | LEVEL 7 | LEVEL 8 |
HARD VERY HARD | HARDEST
| 1 | 2 | 3 | 4 | 5 |
MINIMUM MEDIUM
DAMAGE LEVEL
| 6 | 7 | 8 | 9 |
MAXIMUM TIME COUNT SPEED | SLOW COUNTDOWN |NORMAL COUNT pown| FAST COUNT DOWN
| SOUND | STEREO (Q SOUND) | MONAURAL |
| DEMO SOUND | ON | OFF |
CONTINUE ON OFF
| START MODE | ON | OFF | ||
| MONITOR FLIP | ON | OFF | ||
| MAX ROUND | 1 ROUND | | | 3 ROUNDS | 5 ROUNDS |
REGULATION ON OFF
| FREE PLAY | ON | OFF |
Factory settings are in bold face. After you change the setting, make sure to select "EXIT" and push the Player 1 Start button. Choose STEREO (QSOUND) if your cabinet is equipped with the Qsound Speaker System, otherwise select MONAURAL for proper sound effect.
5. SYSTEM CONFIGURATION ITEM DESCRIPTIONS
COIN Sets the charge per play
GAME DIFFICULTY The higher the number, the more difficult the game play.
Sets the level of offensive power. DAMAGE LEVEL The level of offensive power can be set in 9 steps. As the number increases the more powerful the level
MONITOR FLIP Flips the screen. If the screen appears upside down, change the setting. ON: Upside down OFF: Right side up
STEREO or MONAURAL. STEREO: with QSOUND MONAURAL: without QQOUND SOUND QSOUND is available with CAPCOM QSOUND cabinets only.
For other cabinet, please set to MONAURAL
DEMO SOUND Tums attract sound on or off.
Sets continuous play. CONTINUE ON: Continuous play is possible OFF: Continuous play is not possible
Sets whether or not it is possible to start a 1 player game from the 2 player side. START MODE ON: Game can be started from the 2 player side. OFF: Game cannot be started from the 2 player side.
MONITOR FLIP Flips screen vertically. If the screen appears upside down, change the setting.
Sets the number of rounds for winning. 1 ROUND: Winner of a single round wins MAX ROUND 3 ROUNDS: Winner of 2 out of 3 rounds wins.
5 ROUNDS: Winner of 3 out of 5 rounds wins.
ATION When set to ON, body cutting scenes will not be shown and the color of REGULATIO! blood will be changed to blue.
Sets the game speed. GAME SPEED TURBO 1 - 3: As the number increases, so does the speed. FREE SELECT: Players can select the speed of the game.
FREE PLAY Sets the game for free play mode.
To retum to the factory default settings, select this item and push the FACTORS SETTING PLAYER 1 START button.
EXIT To save the setting changes and return to the TEST MENU, highlight this item and push the PLAYER 1 START button.
MOUNTING THE PC BOARD
- INSTALLING THE MOUNTING BRACES
mounting braces are included in the package
- MOUNTING THE PCB
in the package.
HOW TO REMOVE THE TOP "B" CARTRIDGE
In the future, there will be the capability to remove the top "B" cartridge so that a game can be converted to a new game or upgraded to a different version. It is very important only to seperate the top cartridge from the main board only. Dissasembling either case will void your warranty. Follow the instructions below to seperate the two assemblies.
. Remove the 2 case clamps. . Carefully pull the the "B" cartridge off the bottom cartridge.
Case Clamp
STICKER DESCRIPTIONS
Cartridge serial number sticker | CI % | Waming information sticker Game title sticker AAMA Serial number sticker
Reverse Side of Cartridge
Waring information sticker Cartridge
\__ Serial Number (bottom of case)
Case color sticker
Main Board
Disassembling the case or removing the sealing stickers will void your warranty!
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
535 Oakmead Parkway Sunnyvale, CA 94086