CATHODE RAY TOMES

Black Widow TM-234 1st Printing

Black Widow (Atari, 1982) · Technical Manual · 60 pages · 37 sections · original scan

Page 1
  • Operators Manual With Illustrated Parts Lists
Page 2

If reading through this manual does not lead to solving a certain maintenance problem, call TELEHELP® at the Atari Customer Service office in your geographical area, as shown below

WEST and CENTRAL U S.A. Parts and Service

Atari, Inc. California Customer Service Office 1105 N. Fair Oaks Avenue P.O. Box 427, Sunnyvale, CA 94086 Telex 17-1103 (Monday-Friday, 7:30-4:00 pm Facific Time) = From California, Alaska, or Hawaii (408) 745-2900 = Service from anywhere in the area shown in white @ ‘toll-tree (800) 538-1611

EAST U.S.A. Service only

Atari, inc. New Jersey Customer Service Office 12A World's Fair Drive, Somerset, NJ 08873 Telex: 37-9347 (Monday-Friday, 7:30-4:00 om Eastern time) =e From New Jersey 2 (201) 469-5993 = From anywhere else in tnis area toll-free (800) 526-3849

EUROPE

Parts and Service

Atari Ireland Limited European Customer Service Office Tipperary Town, Ireland Telex 28165 TIPPERARY TOWN, (Monday-Friday, 9:00-6:00 pm GMT) IRELAND. BS 252155

Page 3

Operators Manual

With Illustrated Parts Lists

© 1963 Atari, Inc. All Rights Reserved

Page 4

Black Widow

© 1983 by Atari, Inc. All rights reserved. No part of this publication may be reproduced by any mechanical, photographic, or electronic process, or in the form of a phonographic recording, nor may it be stored in a retrieval system, transmitted, or otherwise copied for public or private use, without permission from the publisher. The game play, all graphic designs, this technical manual, its accompanying schematic diagrams, and the display manual are protected by the U.S. Copyright Act of 1976. This Act provides for increased perialties for violating federal copyright laws. Courts can impound infringing articies while legal action is pending. If infringers are convicted, courts can order destruction of the infringing articles. in addition, the Act provides for payment of statutory damages of up to $50,000 in certain cases. Infringers may also have to pay costs and attorneys’ fees, fines up to $25,000, and face an imprisonment of up to one year. Atari will aggressively enforce its copyrights against any infringers. We will use all legal means to immediately halt any manufacture, distribution, or operation of a copy of video games made by us. Anyone who purchases such copies risks forfeiting such a game.

Published by: ATARI, INC. 790 Sycamore Drive P.O. Box 906 Milpitas, California 95035

Printed in the U.S.A. 3M

Page 5

Black Widow

Notice Regarding Non-ATARI Parts

WARNING

Use of non-ATARI parts or modifications of your ATARI game circultry may adversely affect the safety of your game, and injure you or your players.

You may void the game warranty (printed on the inside back cover of this manual) if you do any of the following: ¢ Substitute non-ATAR! parts in the game © Modify or alter any circuits in the game by using kits or parts not supplied by Atari.

to licensed communications services is not permitted by the FCC (Federal Communications Commission).

If you suspect interference from an ATARI game at your location, check the following: @ All grounds (green wires) in the game are properly connected as shown in the game wiring diagram, and . @ The power cord is properly plugged into a grounded 3-wire outlet. If you are unable to solve the interference problem, please contact ATARI Customer Service. See page vi for service in your area.

Page 6

Black Widow

Table of Contents

1 won Procedures How to Use This Manual 1 a Game Overview. ....... 13 C. Installation Specifications 1-3 D.. Inspecting theGame .......... 13 E. Voltage-Plug Selection and Fuses . 4 F. Switch Locations ........... » 15 Power On/Off Switch . 15 Utility Panel Switche: 15 Option Switches . 15 G. Selecting the Option: * 16 2 Self-Test Procedure A. Obtaining the Operator Information Display................ 2-2 B. Obtaining the Self-Test Displays 2-2 3 Illustrated Parts Lists Cabinet-Mounted Assemblies 32 Control Panel Assembly. ..... 34 Fluorescent Tube and Speaker. 38 Video Displays ............. . 3&9 Utility Panel Assembly. . Coin Door Assemblies . . Power Supply Assembly. Printed-Circuit Boards ZO™mMpOD>

Page 7

Figure 1-1 Figure 1-2 Figure 1-3

Figure 2-1 Figure 2-2 Figure 2-3 Figure 2-4 Figure 2-5 Figure 26 Figure 2-7 Figure 2-8 Figure 2-9

Figure 3-1 Figure 3-2 Figure 3-3 Figure 3-4 Figure 3-5 Figure 3-6 Figure 3-7 Figure 3-8 Figure 3-9 Figure 3-10 Figure 3-11 Figure 3-12 Figure 3-13

Table 1-1 Table 1-2 Table 1-3 Table 1-4

Table 2-1 Table 2-2 Table 2-3 Table 2-4 Black Widow

List of Illustrations

Game Overview. .......... cece creer eens Voltage-Selection Plug and Fuse Locations Switch Locations

Operator Information Display. ............ cece eee eee eee eee Screen 1—Test Passes . Screen 1—Test Fails .. Screen2........ Screen3 . Screen4 . Screen5 . ScreenG ....... eee ee eee cece eee . : Screen 7—Diagnostic Program Displays ...............000

Cabinet-Mounted Assemblies ............:. sees ee eeeeeee Control Panel Assembly. . . 8-Position Joystick Assembly. Fluorescent Tube and Speaker . Wells-Gardner Video Display . Amplifone Video Display . . Utility Panel Assembly .... Vertically Mounted Coin Door American-Made Coin Door..... Color X-Y Power Supply Assembly . PCB Mounting Hardware Black Widow Game Printed-Circuit Board Assembly Regulator/Audio | PCB Assembly

Installation Specifications Switch Settings for Price Options Switch Settings for Special Options ... Switch Settings for Bonus and Difficulty Options .

RAM Locations ROM Locations ............-..-.- EAROM and Custom I/O Chip Locations Vector-Generator Diagnostic Tests ...

Page 8

Set-Up Procedures

A. How to Use this

Manual , This manual, written for game operators and service technicians, describes the Black Widow Upright game. Chapter 1 contains game specifications, inspection procedures, voltage plug and fuse information, switch locations, and option information. Chapter 2 contains self-test procedures. Chapter 3 contains illustrated parts lists. Figures 1-1 and 3-1 illustrate the Upright game cabinet. These figures refer you to other places in the manual for more information about specific cabinet parts.

Chapter

Page 9

Set-Up Procedures Black Widow

Joystick Assy. See Figure 3-3 Control Panel Assy. ‘See Figure 3-2

Speaker

Coin Door Assy. See Figures 3-8 & 3-9

: Game PCB * B74 See Figures 3-11 & 3-12

bq See Figures 3-11 & 3-13

Utility Panel Assy. See Figure 3-7

WARNING Shock Hazard Do not plug in the game until it has been inspected. This game should only be connected to a grounded 3-wire outlet. If you have only a 2-wire outlet, we recommend you hire a licensed electrician to install a grounded outlet. Players may receive an electrical shock if this game is not properly grounded! POWER ON/OFF SWITCH Power Supply See Figure 3-10

x /tem with a serial number label

Figure 1-1 Game Overview

4-2

Page 10

Black Widow

B. Game Overview

Black Widow challenges you, the spider, to defend your web from mosquitoes, beetles, hornets, and other insects. Use two joysticks to avoid or shoot enemies and bugs. Watch out for the grenade, rocket bug, thunder bug, spoiler, and collect the grubstakes for extra points! Skill Step™, the Atari feature that allows players to start consecutive games at higher levels, offers players continual challenge. All major parts of the Black Widow game are illustrated in Figure 1-1.

C. Installation Specifications

Table 1-1 describes the physical, electrical, and environmental specifications of the game.

Table 1-1 Installation Specifications

Power 200 W Temperature 0° to +38° C (+32° to + 100° F) Humidity Not to exceed 95% relative Height 184 cm (72% in.) Space Required 64 x 80 om (25% x 31% in)

D. Inspecting the Game

Please inspect your game carefully to ensure that it was delivered to you in good condition.

WARNING Shock Hazard To avoid electrical shock, do not plug in the game until the procedures in Sections D and E have been completed! Do not touch internal parts of the display with your hands or with metal objects held in your hands! Set-Up Procedures

Examine the exterior of the game cabinet for dents, chips, or broken parts. Remove the screws from the rear access panel. Unlock and open this panel and the coin door. Inspect the interior of the game as follows: a. Ensure that all plug-in connectors (on the game harnesses) are firmly plugged in. Replug any connectors found unplugged. Do not force connectors together. The connectors are keyed so they only fit in the proper orientation. A reversed edge connector may damage a PCB and will void your warranty. b. Ensure that all plug-in integrated circuits on the PCB are firmly plugged into their sockets. c. Remove the tie-wrap that secures the coiled power cord inside the cabinet. Inspect the power cord for any cuts or dents in the insulation. Repair or replace it as required. Place the square strain-relief plate in the wood slot at the bottom of the rear panel opening. d. Inspect major subassemblies, such as the power supply, control panel, and video display. Make sure they are mounted securely and that the green ground wires are connected.

Page 11

‘Set-Up Procedures

E. Voltage-Plug Selec-

E. Voltage-Plug Selec tion and Fuses

The power supply in your game contains six fuses. When you replace a fuse, use the identical type fuse with the same electrical rating (see Figure 1-2). The power supply operates on the line voltage of many countries. The power supply comes with either one, two, or three voltage-selection plugs. Plug voltages and wire colors are 100 VAC (violet wire color), 120 VAC (yellow wire color), 220 VAC (blue wire color), and 240 VAC (brown wire color. Black Widow

See Figure 1-2 for placement of the voitage-selection plug. Before plugging in your game, check your line voltage. Next, check the wire color on the voltage-selection plug. Make sure the voltage-selection plug is correct for the voltage of your location. Now plug the game into a grounded 3-wire outlet.

Fuse cover not shown.

Figure 1-2 Voltage-Selection Plug and Fuse Locations

1-4

Page 12

Black Widow

F. Switch Locations

Power On/Off Switch

The power on/off switch is located on the back of the cabinet on the lower left side (see Figure 1-3).

Utility Panel Switches

The volume control, coin counter, self-test switch, and auxiliary coin switch are on the utility panel. The utility panel is located inside the upper coin door (see Figure 1-3). The volume control adjusts the level of sound produced by the game. The coin counter

Volume Control (To increase, turn clockwise) Power On/Off Switch Set-Up Procedures

records the number of coins entered into the game. The self-test switch initiates and stops the self-test mode. The auxiliary coin switch is used to credit the game without activating a coin counter.

Option Switches

Option switches for game price, number of lives, bonus, and difficulty selection are on the CPU printed-circuit board (PCB). These switches are at locations D4, B4, and P10/11 (see Figure 1-3).

‘Switch at B4 (Game Price)

Switch at D4 (Game Play)

Switch at P10/11 (Special Options)

Figure 1-3 Switch Locations

Page 13

Set-Up Procedures

G. Selecting the Options

Settings of the option switches are explained in Tables 1-2, 1-3, and 1-4. Options preset at the factory are shown by the < symbol. However, you may change the settings to suit your needs. To verify option switch settings, turn the game off and back on. Then set the self-test switch to on and verify the option switch settings on the self-test display as described in Chapter 2, A. Obtaining the Operator Information Display. Table 1-2 describes the settings for the 8-toggle switch at location D4. This switch selects the game price options, the coin mechanism multipliers, and the bonus play options. The coin mechanism is a device on the inside of the coin door that inspects the coin to determine if the correct coin has been inserted. After this inspection, the mechanism either accepts or rejects the coin. . The multipliers (D4 switches 4-6) determine how much each coin mechanism will be worth to the game’s logic. The coin door has two mechanisms. The basic unit of measurement is a coin worth $.25 or 1 DM, which equals a multiplier of x1. Thus, if you have a 2 DM/1 DM coin door with two coin counters,

hy switch 8 at location D4 to on and switches 5 and

to off. You may offer bonus play for certain combinations of coins inserted into the game. For example, with the game set at $.25 per play, players who deposit four successive quarters, then press the start switch, can recieve a bonus play. The bonus feature encourages players to insert more money than just the minimum required for one game. All coins must be inserted before pressing the start switch.

Table 1-2 Switch Settings for Price Options

Settings of 8-Toggle Switch on Black Widow CPU PCB (at D4) 8 7 6 5 4 3 2 1 Option

Off On On Off Off On Off “On

Off Off

On

Off

On On

Off Off

On Off 1 coin/1 credit 1 coin/2 credits 2 coins/1 credit Free play

Right coin mechanism x 1<4 Right coin mechanism x 4 Right coin mechanism x 5 Right coin mechanism x 6

Left coin mechanism x 1< Left coin mechanism x 2

No bonus coins (0)*< No bonus coins (6) No bonus coins (7)

For every 2 coins inserted, logic adds 1 more coin (1) For every 4 coins inserted, logic adds 1 more coin (2) For every 4 coins inserted, logic adds 2 more coins (3) For every 5 coins inserted, logic adds 1 more coin (4) For every 3 coins inserted, logic adds 1 more coin (6) On

On

*The numbers in parentheses will appear on the BONUS ADDER line in the Operator Information Display (Figure 2-1) for these settings. “4Manufacturer's recommended setting

Page 14

Black Widow

Table 1-3 describes the settings for the 4-toggle switch at location P10/11. This switch selects Set-Up Procedures

whether credited coins are counted on one or on both coin counters.

Table 1-3 Switch Settings for Special Options

Settings of Toggle Switch in Black Widow CPU PCB (at P10/11) Option

On Off

Table 1-4 describes the settings for the 8-toggle switch at location B4. This switch selects the Credits counted on one coin counter Credits counted on two separate coin counters

game’s starting level, bonus spiders, and difficulty

level.

Table 1-4 Switch Settings for Bonus and Difficulty Options

Settings of 4-Toggle Switch on Black Widow CPU PCB (at B4) 8 7 6 5 4 3 2 1

Off Off Off On

On Off

On On

On Off

On On

“4Manufacturer’s recommended setting Off

Off On gg

°

939g Off Off On On Maximum start at level 13 Maximum start at level 214 Maximum start at level 37 Maximum start at level 53

3 spiders per game 4 spiders per game 5 spiders per game 6 spiders per game

Easy game play Medium game play Hard game play Demonstration mode

Bonus spider every 20,000 points Bonus spider every 30,000 points Bonus spider every 40,000 points No bonus

1-7

Page 15

Self-Test Procedure

This game will test itself and provide data to show that the game circuitry and controls are operating properly. Self-test data is presented visually on the video display and audibly through the speakers. No additional equipment is required. We suggest that you perform the self-test procedure when you first set up the game, each time you collect money, when you change the game options, when you erase scores and times, or when you suspect a game failure.

Chapter

Page 16

Self-Test Procedures

A. Obtaining the Operator Informa tion Display

Operator Informa-

Set the self-test switch to the on position (refer to Figure 1-3 for the location of the self-test switch). Patterns will appear on the display for a few seconds, then an operator information display will appear as shown in Figure 2-1. The operator information display shows the game statistics and certain game option information. The information display is also used to erase game scores and times as described in the following procedure. All credits are cancelled when the self-test switch is turned on. If the message EAROM BUSY PLEASE WAIT appears, wait for it to disappear before proceeding.

NOTE The BONUS ADDER number (0 through 7) displayed indicates the price option selected by the option switch at location D4. Refer to Table 1-2 in Chapter 1, Switch Settings for Price Options, for the price option settings represented by the BO- NUS ADDER number.

HOLD FIRE THEN PRESS START I FOR TEST LIVES PER GAME 3 MAX START WAVE 21 GAMES PLAYED i} PVERAGE GAME TIME ey LEFT MECH x! RIGHT MECH xi BONUS ADDER O MEDIUM BONUS SPIDER EVERY #0000 | COIN | PLAY

Figure 2-1 Operator Information Display

To Erase Scores and Times:

  • Obtain an operator information display as shown in Figure 2-1 by setting the self-test switch to the on position.
  • Press the 1-player start button until the screen displays the appropriate instruction, i.e., HOLD FIRE THEN PRESS START 1 TO (CLEAR SCORES) (CLEAR TIMES) (CLEAR TIMES AND SCORES).

Black Widow

Hold FIRE joystick forward, then press the 1-player start button. The words EAROM BUSY PLEASE WAIT will appear on the screen until the entire table is erased. Wait until the display disappears before proceeding.

  • Set the self-test switch to the off position to erase the operator information display.

B. Obtaining the Self-

B. Obtaining the Self Test Display

The following information includes instructions for ~ obtaining various self-test displays. These displays are provided to quickly check the game’s operation and locate malfunctions in the game controis and circuitry. If there is a failure, the game produces audiovisual indications to help you find the problem.

NOTE This procedure does not test the coin door lockout coils and coin counter. If the lockout coils do not energize when the game is on, suspect the lockout coil wiring, coin door harness, game PCB harness, latch R9, or driver Q2 of the game PCB. Troubleshoot using the game schematics.

SCREEN 1 The screen 1 display shown in Figure 2-2 is obtained by setting the self-test switch to the on position. Then hold the FIRE joystick forward and press the 1-player start button. If the test passes, the display will go blank for a few seconds before displaying screen 1. This display indicates the condition of the ROM, RAM, and three other integrated circuits.

Page 17

Black Widow

‘Switch at D4 (Coin modes) Switch Toggle 1 Toggle 8 Self-Test Procedures

Switch at B4 (Game play) Switch ‘Switch Toggle & Toggle 1

Figure 2-2 Screen 1—Test Passes

RAM failure is indicated by a sound and, if possible, an R displayed in the top center of the screen. Count the tones. One or two tones indicates RAM failure at game PCB location N/P1. Three or four tones indicate RAM failure at game PCB location K7 (see Table 2-1).

Table 2-1 RAM Locations

Number of Tones RAM Location on Game PCB

tor2 NIP1 sor4 K7

ROM failure is indicated by one or more vertically arranged numbers displayed on the top half of the screen (see Figure 2-3 ). Use Table 2-2 to identify the bad ROM and determine its location. Table 2-2 ROM Locations

Screen Display ROM Location on Game PCB

o* L7 t MI/N7 2 N/P7 3 R7 4 01 5 EFI 6 H1 7 Jt 8 K/L gre M1

*If this ROM is bad, you will hear a constant low tone and the program may be unable to display a screen image. **if this ROM is bad, the screen may be blank.

Page 18

Self-Test Procedures

EAROM or CUSTOM I/O CHIP failure is indicated by “one letter in the top center of the screen. Use Table 2-3 to identify the bad IC and determine its location.

Table 2-3 EAROM and Custom I/O

Chip Locations

Screen Display Chip Location on Game PCB

E EAROM at M2 Q Custom I/O chip at C/D3 P Custom I/O chip at B3

SWITCH failure is indicated by the associated 0 not changing to a 1 on the screen and no sound being Produced when the switch is activated. SOUND failure is indicated by no sound. Check the volume control on the utility panel, or troubleshoot using the game schematics.

“doo1o! 10

Figure 2-3 Screen 1—Test Fails

To see self-test screens 2 through 6, press the auxiliary coin switch on the utility panel once to advance to the next-screen.

SCREEN 2 A white diagonal grid pattern and a complete character set appear on the screen (see Figure 2-4). The edges of the grid pattern should touch the sides of the screen. If the display is not centered, symmetrical, or the proper size, adjust the X SIZE, Y SIZE, X CTR, Y CTR, X LIN, or Y LIN potentiometers on the game PCB (refer to the Schematic Package). If the characters are incorrect, check again for a 2 displayed in the preceding ROM failure test (Screen 1). Black Widow

SCREEN3 -.-—-.- -- se A white box of decreasing size appears during this test. The box should shrink smoothly. There are seven stages, each with a tone. This pattern tests the binary and linear scaling circuitry. Troubleshoot using the game schematics.

Figure 2-5 Screen 3

SCREEN 4 A Series of horizontal lines are visible in the middle of the screen. This is a raster test, used by the manufacturer only, to set the color levels.

Page 19

Black Widow

Figure 2-6 Screen 4

SCREEN 5 This test checks the seven screen colors and six intensities of each color (see Figure 2-7). If the intensities do not progress from dim at the top of each color group to bright at the bottom, suspect a problem in the Z-axis of the game PCB or the video display. Use this pattern for the display tracking adjustments (refer to the color X-Y display manual).

ROYAL BLUE(B) GREEN (G)

; 7 YELLOW (RG) LIGHT BLUE (GB) LAVENDER (RB)

Figure 2-7 Screen 5 Self-Test Procedures

  • SCREEN 6 A grid pattern touches the corners of the video display (see Figure 2-8). Press the 1-player start button to change colors. Use this pattern for the display purity and convergence adjustments (refer to the color X-Y display manual).

Figure 2-8 Screen 6

Page 20

Self-Test Procedures

SCREEN 7 Screen 7 display comprises a diagnostic program controlled by switches 2, 3, and 4 of the 4-toggle option switch at location P10/11 on the game PCB. This group of switches lets you choose one of six tests. These tests provide recurring sequences to make it easy for you to troubleshoot the vector-generator circuitry. The tests and their respective option switch settings are given in Table 2-4. Black Widow

To display this screen, hold the auxiliary coin switch down, then press the 2-player start button. To exit from this screen, set the self-test switch to off. During this test, the screen will either be blank or display vectors, depending on the settings of the switches at location P10/11 on the game PCB. Figure 2-9 shows these screens.

Table 2-4 Vector-Generator Diagnostic Tests

Settings of 4-Position DIP Switch at P10/11

TestAction432
Test 1Tests WDDIS every 4 msec (blank screen)OffOffOff
Test 2Tests vector-generator halt instruction every 55OnOffOff

msec (blank screen)

Test 3Tests vector-generator long vector (and halt in-OffOnOff

struction) every 8.2 msec

Test 4Tests vector-generator jump instruction (and longOnOnOff

vector and halt instruction) every 8.2 msec

Test 5Tests vector-generator short vector instructionOffOffOn

(and all of Test 4) every 8.6 msec

Test 6Tests vector-generator JSRL/RTSL instructionOnOffOn

(and all of Test 5) every 10.2 msec

Test 2Blank screenOffOnOn
Test 2Blank screenOnOnOn

TEST 3 TEST 4

TEST 5 TEST 6

Figure 2-9 Screen 7—Diagnostic Program Displays

Page 21

Illustrated Parts Lists

This chapter provides information to order parts for your game. Common hardware (screws, nuts, washers, etc.) has been deleted from most of the parts lists. However, a parts list for the hardware needed to mount the game and Regulator/Audio I! pritedelreut boards to the cabinet has been included. ~ - The PCB parts lists are arranged in alphabetical order by component type. Each component subsection is arranged alphanumerically by reference designator. Other parts lists are arranged alphanumerically by Atari part number. in these parts lists, all A- prefix numbers come first. Following these are numbers in sequence evaluated up to the hyphen, namely 00through 99 then 000598- through approximately 201000-. When ordering parts, please give the part number, part name, number of this manual, and serial number of your game (see Figure 1-1 for locations of serial numbers.) This will aid in filling your order rapidly and correctly. We hope the results will be less downtime and more profit from your game. Atari Customer Service numbers are listed on the inside front cover of this manual for your convenience.

Chapter

Page 22

Illustrated Parts Lists Black Widow

A. Cabinet-Mounted Assemblies

Fluor Tube & Speaker Assy. 178034024 see Figure 3-4 (Fmolding) 03739201 (Vent. grille) A038164-01 (Cabinet assy.)

178013-001 (Latch)

Control Panel Assy. See Figure 3-2 Joystick Assy. See Figure 3-3

037308-01 (Speaker grille)

(Speaker)

Coin Door Assy. See Figures 3-8 & $9

Power Supply Assy. See Figure 3-10 478048-001 A037470-01 (Caster) (On/off switch assy.) 009992-01 (On/off switch cover) 78-3201 (Glide)

Figure 3-1 Cabinet-Mounted Assemblies

Page 23

Black Widow Illustrated Parts Lists

Cabinet-Mounted Assemblies Parts List

Part No. Description

A002465-01 Coin Counter

A037453-03Strain-Relief Power Cord(U.S. and Canada)
A037455-03Strain-Relief Power Cord(Australia and New Zealand)a

A037470-01 Power On/Off Switch/Mounting Plate Assembly

A037784-03,Strain-Relief Power Cord(United Kingdom, Ireland, Lebaron, Saudi Arabia, india, Hong Kong,

. _ Singapore, Egypt, Nigeria, Republic of South Africa, Zimbabwe)

A038164-01Cabinet Assembly(includes glides and PCB retainers, but not the rear access panel)

A038586 Main Harness Assembly ~ - A038588-01 Power Hamess Assembly A038590-01 19-Inch Wells-Gardner Color X-Y Video Display Assembly A039990-01 Main Conversion Harness Assembly (not shown) The following four items are the technical information supplements to this game: SP-234 Black Widow Schematic Package ST-234-01 Black Widow Label with Self-Test Procedure and Option Switch Settings TM-183 * Service Manual for 19-Inch Wells Gardner Color X-Y Display TM-234 Black Widow Operators Manual

71-2110Lock Mechanism(for rear access panel)

78-3201 Adjustable Glide 78-6900402 Vinyl Foam Single-Coated Adhesive Tape, %-inch Wide x ¥-Inch Thick 009992-01 On/Off Switch Cover 037308-01 Speaker Grille 037332-01 Ventilation Grille

037419-02Rear Access Panel(does not include lock)
038091-01Molded Coin BoxAcceptable substitute is part no. AQ37491-01

178013 Spring Draw Latch 178034024 %-Inch Black Plastic T-Molding 178048-001 2nch Rigid Caster

Page 24

Mlustrated Parts Lists

B. Control Panel Assembly

Black Widow

WARNING Players may receive an electrical shock if this control panel is not properly grounded! After servicing any parts on the panel, check that the ground wire is firmly attached to the metal tab on the inside of the control panel. Only then should you lock up the

Figure 3-2 Control Panel Assembly A039974-01 A

Page 25

Black Widow Illustrated Parts Lists

Control Panel Assembly

Parts List

Description

039976-04 171021-001 Control Panel with Decal Contro! Panel Harness Assembly SPDT Momentary Pushbutton Start Switch with Red Light-Emitting Diode #10 Flat Washer

#10-24 Hexagonal Locknut #10-24 x %-Inch Black Carriage Bolt Vinyl Foam Single-Coated Adhesive Tape, %-Inch Wide x ¥-Inch Thick Black Molded Switch Bezel

Control Panel Control Panel Decal &Position Joystick

Page 26

Iustrated Parts Lists Black Widow

99-080028 (Shaft)

99-080026 (Black plastic washer)

99-080036 (Top Plate)

(Stee! Washer)

(Spring)

99-080037 (Switch plate)

a2-AL616 (Switch actuator)

(Screw) jt 73-3003 (Retaining Ring)

Figure 3-3 8-Position Joystick Assembly 171021-001

Page 27

Black Widow Mustrated Parts Lists

8-Position Joystick Assembly Parts List

Description

Retaining Ring #6 x 1-Inch Cross-Recessed Pan-Head Type BT Seif-Tapping Stee! Screw Leat Switch 24nch Black Plastic Washer

Metal Shaft Nylon Washer Spring Bellows

Flat Steel Washer Plastic Guard/Actuator Top Plate Switch Mounting Plate Nylon Switch Actuator

Page 28

Mustrated Parts Lists Black Widow

C. Fluorescent Tube and Speaker

148001-017 (Speaker)

79-561816P (Wire nut)

038151-01 (Jumper wire) 037309-01 (Top retainer)

179035-001 (Lamphoider) 142028-xxx 99-11003 (Starter) 99-11008 (Socket)

(Attraction glass with graphics) (Ground wire) 78-6900402 (Tape)

037304-01 To ensure that the fluorescent tube (Bottom retainer) starts, make sure the ground wire is firmly attached to both the ballast trans- ¢ former and the steel lamp bracket.

Figure 3-4 Fluorescent Tube and Speaker A038161-01 & -02 A Parts List

Part No. Description A037457-01 ‘Tube and Speaker Harness Assembly A037540-01 Ground Wire with Ring Lug 70-304 18-Inch, 15-W, Cool White Fluorescent Tube 78-6900402 Viny! Foam Single-Coated Adhesive Tape, %4-inch Wide x % inch Thick 79-561816P_ Spring-Connector Wire Nut for 16- to 18-Gauge Wires 99-11003 Fluorescent Lamp Starter 99-11006 Fluorescent Lamp Locking Tab (tab consists of two pieces) 99-11009 Starter Socket 037304-01 Bottom Attraction Glass Retainer 037309-01 Top Attraction Glass Retainer 037469-01 Steel Lamp Bracket 038151-01 16-Inch Jumper Wire 039977-01 Attraction Glass with Graphics 142028-001 60 Hz, 118 V, Ballast Transformer (used on A038161-01 assembly) 142028-002 50 Hz, 118 V, Ballast Transformer (used on A038161-02 assembly) 148001-017 6 x Sinch, 8Q, 6-Ounce Oval Shielded High-Fidelity Speaker 179035-001 2-Pin Fluorescent Lampholder

Page 29

Black Widow Illustrated Parts Lists

D. Video Displays

037322-01

WARNING ‘SHOCK HAZARD

The following procedure should only be performed by a qualified service technician. Before removing or repairing the video display, unplug the game. High voltages may exist in any video display, even with power disconnected. Use extreme caution and do not touch electrical parts of the display yoke area with your hands or with metal objects in your hands! Discharge the high voltage from the cathode-ray tube as follows: (Retainer clip)

Attach one end of a large, well-insulated, 18-gauge jumper to ground. Momentarily touch the free end of the grounded jumper to the anode by sliding it under the anode cap. Walt two minutes and discharge the anode again.

IMPLOSION HAZARD If you drop the display and the picture tube breaks, /t will implode! Shattered glass can fly six feet or more from the implosion. Use care when replacing any display.

Figure 3-5 Wells-Gardner Video Display Parts List

Part No. Description

A038593-01 Welis-Gardner Interconnect Assembly 92-053 19-Inch Wells-Gardner Color X-Y CRT 038181-01 Video Display Support Bracket 037303-01 Display Shield 037322-01 Display Bezel 037330-01 Display Shield Retainer Clip 038184-01 Static Shield

Page 30

Illustrated Parts Lists Black Widow

WARNING ts Eat SHOCK HAZARD

The following procedure should only be performed by a qualified service technician. Before removing or repairing the video display, unplug the game. High voltages may exist in any video display, even with power disconnected. Use extreme caution and do not touch electrical parts of the display yoke area with your hands or ~-with metal objects in your hands! Discharge the high voltage from the cathode-ray tube as follows: Attach one end of a large, well-insulated, 18-gauge jumper to ground. Momentarily touch the free end of the grounded jumper to the anode by sliding it under the anode cap. Wait two minutes and discharge the anode again.

IMPLOSION HAZARD If you drop the display and the picture tube breaks, /t will implode! Shattered glass can fly six feet or more from the implosion. Use care when replacing any display.

038184-01 (Static shield)

Figure 3-6 Amplifone Video Display

3-10

Page 31

Black Widow Mlustrated Parts Lists

NOTE Amplifone CRT (A201001-01) and Deflection PCB (A201014-01) are as a matched, call shipped brated pair and should be used ~ | as such.

A201001-01 (Amplifone CRT)

Figure 3-6 Amplifone Video Display Parts List

Part No. Description (Reference Designations and Locations in Bold)

Amplifone Display Assembly A200000-07 A201001-01 19-Inch Amplifone Color X-Y CRT A201012-01 High-Voltage PCB A201014-01 Deflection PCB 034536-02 Foam Pad (used with High-Voltage and Deflection PCBs) 037303-01 Display Shield 037322-01 Display Bezel 037330-01 Display Shield Retainer Clip 038184-01 Static Shield

Page 32

Illustrated Parts Lists

E. Utility Panel

A002465-01 (Coin counter)

WARNING Before removing or repairing the utility panel, tum the game off. receive an electrical shock if the utility panel is not properly grounded! After servicing any parts on the panel, make ‘sure that the ground wire is firmly attached to the metal screw on the back of the coin counter. Players may 69-001 . 178070-00' (Self-test switch) (yojume control knob)

Description

6 V Coin Counter Utility Panel Harness Volume Control Figure 3-7 Utility Panel Assembly Parts List

SPDT Momentary-Contact Pushbutton Auxiliary Coin Switch with Black Cap

DPOT Self-Test Switch #6-32 Standard Machine Nut Utility Panel ‘%,-32 Stamped Nut

#6-32 x ¥2-Inch Pan Head Machine Screw Volume Control Knob Black Widow

(Harness)

(Bracket)

62-041 (Auxiliary coin switch)

19-9032 (Volume control)

Page 33

Black Widow illustrated Parts Lists

F. Coin Door Assemblies

470000-001 (Lamp) La 179047-001 99-15023

(Lamp Base) @ (Base Plate)

~“Q Pa!

99-15056 ra 15028 99-15040 (Screw for Bezel) (Lever)

99-15025 (Coin inlet)

a 99-15054 (Pivot for Lever)

99-15055

aS.

75-914S (Hex Nut) 75-056 (Lock Wash.)

Figure 3-8 Vertically Mounted Coin Door A037619-xxx D

3-13

Page 34

Wustrated Parts Lists

(Hamess—not shown)

99-15072 (Door Frame)

99-15073 98-15070 (Upper Door) | (Doors and Frame) 99-15074 (Lower Door)

A037619-01 ~~ U.S. 25¢/25¢ Coin Door A037618-02 — U.S. 50e/50e Coin Door A037619-03 — Canadian 25¢/2S¢ Coin Door A037619-04 — British 10 P/0 P Coin Door A037619-05 — British 10 P/SO P Coin Door A037619-06 — British 20 PISO P Coin Door A037619-07 — Australian 20¢/20¢ Coin Door 403761912 — 5 Fri5 Fr Coin Door ‘A037619-13 — Swiss 1 Frit Fr Coin Door ‘A037619-14 — French 1 Fri1 Fr Coin Door 99-15036 Black Widow

99-15001 thru 99-15011 (Return Button)

‘99-15039 (Bezel for Cover)

(Cover)

A037619-15 — French 2 Fr/1 Fr Coin Door A037619-16 — Swedish 1 Kr/1 Kr Coin Door A037619-17 — Spanish 25 Pts/25 Pts Coin Door A037619-18 — Italian 100 1/100 L Coin Door A037619-19 — Hong Kong $1/$1 Coin Door A037619-20 — Japanese 100Y/100Y Coin Door

Figure 3-8 Vertically Mounted Coin Door, continued A037619-xxx D

Page 35

Black Widow

Part No.

03754201 72-1414S

75-9148 75-3414S 99-15001 99-15002 99-15003 99-15004 99-15005 99-15006 99-15007 99-15008 99-15009 99-15010 99-15011 99-15023 99-15025 99-15026 99-15027 99-15028 99-15029 99-15030 99-15036

99-15038 99-15039 99-15040 99-15042 99-15052 99-15054 99-15055 99-15056 99-15060 99-15063 99-15066 99-15067 99-15068 99-15069 99-15070 99-15071 99-15072 99-15073 99-15074 99-15075 038091-01 170000-001 171006-035 179047-001 Illustrated Parts Lists

Vertically Mounted Coin Door Parts List

Description

Harness Assembly #4-40 x %-Inch Cross-Recessed Pan-Head Steel Machine Screw #6 Internal-Tooth Zinc-Plated Stee! Lock Washer #4-40 Steel Machine Hex Nut #4-40 x %-Inch 82° Cross-Recessed Flat-Head Steel Machine Screw Coin Return Button with U.S. 25¢ Price Plate Coin Return Button with U.S. $1 Price Plate Coin Return Button with German 1 DM Price Plate Coin Return Button with German 2 DM Price Plate Coin Retum Button with German 5 DM Price Plate Coin Return Button with Beigian 5 Fr Price Plate Coin Retum Button with French 1 Fr Price Plate Coin Retum Button with Japanese 100 Yen Price Plate Coin Return Button with British 10 Pence Price Plate Coin Return Button with Australian 20¢ Price Plate Coin Return Button with Italian 100 Lire Price Plate Base Plate Left Half of Coin inlet Right Half of Coin Inlet Side Plate of Coin Return Box Base Plate of Coin Return Box Switch Bracket Flap for Lockout Coil (U.S. 25%) Metal Coin Return Cover Bezel for Coin Return Button Metal Bezel for Coin Return Cover Coin Return Lever Coin Switch for U.S. 25¢ Spring for Coin Retum Button Pivot for Coin Return Lever Retaining Screw #4-40 x ¥%.Inch Cross-Recessed Pan-Head Steel Machine Screw Switch Cover Screw for Hinge Screw for Clamp Lock Assembly Lockout Coil Spring for Lockout Coil Doors and Frame Clamp for Frame Door Frame Upper Door Lower Door Switch Adjuster Coin Box (Not included in assembly) Acceptable substitute is part number A037491-01 6.3V Miniature Wedge-Base Incandescent Lamp Metal Coin Mechanism Lamp Base

Page 36

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 37

lllustrated Parts Lists

99-10151 (Left coin inlet)

98-10147 (Harness) SOT PY (Bar) i fi a J eo

ALL iV) 10042 thru 99-10045 i y Lo (Coin switch assy.) > 1 a Oe <i tf (Coin switch) N a Sx. 99-10150 _ / eA (Switch cover) 98-10075 thru 99-10078 _~ 1 (Switch wire) 9910008 \_ { 7514128 (Screw) (Retainer)

Figure 3-9 American-Made Coin Door Assembly 171027-001 A

Black Widow

Page 38

Black Widow Mlustrated Parts Lists

99-10142 (Button housing)

99-10119 (Button assy) ) ga.49148 72-HA1404C (Screw)

99-10117 (Coin return door)

99-10144 (Channel clip)

72-JA1405B (Screw) 99-10149 (Service door)

038091-01 (Coin box) 99-10143 (Frame)

Figure 3:9 American-Made Coin Door Assembly, continued 171027-001 A

Page 39

MWustrated Parts Lists Black Widow

American-Made Coin Door Assembly

Parts List

Part No. Description

171006-035 Metal Coin Mechanism for U.S. $.25 65-4416 Coin Switch 70-11-47 Miniature Bayonet Lamp 72-9406S : #4-40 x}-Inch Truss-Head Screw 72-HA1404C #4-40 x %4-Inch Pan-Head Screw 72JA1405B #4-40 x .31-Inch Pan-Head Screw 75-1412S #4-40 x %-Inch Pan-Head Screw 75-9448 #4-40 Locknut ‘99-10008 Retainer 99-10042 Coin Switch Assembly for Belgian 5 Fr and U.S, $.25 99-10043 Coin Switch Assembly for German 1 DM, Japanese 100 Yen, Swiss 1 Fr 99-10044 Coin Switch Assembly for German 2 DM, Italian 100 L, U.S. $1.00 99-10045 Coin Switch Assembly for Australian $.20, German 5 DM, British 10 P 99-10068 Coin Return Chute 99-10075 Switch wire (included in coin switch assembly) 998-10076 Switch wire (included in coin switch assembly) 99-10077 Switch wire (included in coin switch assembly) 99-10078 Switch wire (included in coin switch assembly) 99-10080 Lamp socket 99-10081 Key holder ‘98-10096 Fastener 99-10104 Bar retainer 99-10105 Bar 99-10115 Spring . 99-10116 Plastic Coin Return Lever 99-10117 Steel Coin Return Door 99-10118 Amber Coin Return Button 99-10119 Amber Coin Button for U.S. $.25 99-10134 Coin Button Cover 99-10139 Coin Door 99-10140 Coin Door inner-Panel Assembly 99-10141 Diecast Coin Return Cover 99-10142 Diecast Button Housing 99-10143 Coin Door Frame 99-10144 Coin Door Channel Clip 99-10145 Offset Cam 99-10146 Coin inlet Chute Assembly 99-10147 American-Made Coin Door Harness. 99-10148 Lock Assembly 99-10149 Service Door 99-10150 Switch Cover 99-10151 Left Coin Inlet 99-10152 Right Coin Iniet 99-10153 Coin Return Box 99-10154 Bracket Assembly

Page 40

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 41

Mlustrated Parts Lists Black Widow

G. Power Supply Assembly

WARNING A037395-01 Fuse cover must be in place dur- (Transformer Assy.) ing game operation.

(Pwr. Harness)

‘A034629-01 3A-MDA3501 (AC. Harn.) (Rectifier)

Figure 310 Color X-Y Power Supply Assembly A037396-xx D

3-20

Page 42

Black Widow

78-70501SC_

79-15021001 79-3206 79-441101 03448202

034544-01 037243-01 037639-01 037641-01 Mustrated Parts Lists

Color X-Y Power Supply Assembly Parts List

Description (Reference Designations in Bold).

Voltage Plug for 100 V (violet) Voltage Plug for 120 V (yellow) . _— Voltage Plug for 220 V (blue) = a Voltage Plug for 240 V (brown)

AC Harness Assembly — RFI Filter Assembly (FL1) Power Harness Assembly Fuse Hamess Assembly

Color X-Y Transformer Assembly (T1) 27,000 uF 15 VDC Electrolytic Capacitor (C1) Type-MDA 3501 Bridge Rectifier (CR1) 4 A, 250 V, 3AG Slow-Blow Glass Cartridge-Type Fuse (F2, F4-F6)

7 A, 250 V, 3AG Slow-Blow Glass Cartridge-Type Fuse (F1) 20 A, 32 V, 3AG Slow-Blow Glass Cartridge-Type Fuse (F3) Nylon Type 6/6 Hole Bushing with %-Inch Inside Diameter x *%,-Inch Outside Diameter x V-Inch Thick 2-Inch Diameter Capacitor Mounting Bracket

2-Circuit Single-Row Terminal Block 5-Position 3AG Fuse Block with %-Inch Quick-Disconnect Terminals Panel-Mounting Non-Indicating 3AG Cartridge-Type Fuse Post Power Supply Chassis Base

Fuse Block Cover Metal Base Plate (not shown in illustration) Label for Fuse Value (F1) Label for Fuse Values (F2-F6)

NOTE assembly has the 120 V plug 220 V, and 240 V plugs 220 V and 240 V plugs

Line Voltage Range —_—Voltage Selection Plug Wire Color 90-110 VAC (100) 105-135 VAC (120) 200-240 VAC (220) 220-260 VAC (240) Violet Yellow Blue Brown

Page 43

Mlustrated Parts Lists Black Widow

H. Printed-Circuit

Boards

72-6810S (Screw) 175004-706 (Spacer) 034536-02 (Foam pad)

(Regulator! Audio I! PCB)

034536-02 (Foam pad)

Figure 3-11 PCB Mounting Hardware Parts List

Part No. Description

72-6810S #8 x %-Inch Phillips-Head Screw (secures PCB to cabinet) 175004-706 #8 Spacer (secures PCB to cabinet) 034536-02 Foam Pad

3-22

Page 44

Black Widow

Sy { cK oosrg)= (Rarer Ronee Cast

23. cam ee to-ve22 109 oe py BY lead

  • gaoma mH

a

Figure 3-12 Black Widow Game Printed-Circuit Board Assembly Illustrated Parts Lists

Page 45

Iiustrated Parts Lists Black Widow

Black Widow Printed-Circuit Board Assembly Parts List

DesignatorDescriptionPart No.

Capacitors

C1-C150.1 uF, 50 V, Ceramic-Disc Radial-Lead Capacitor122002-104
C1647 uF, 50 V Aluminum Electrolytic Fixed Axial-Lead Capacitor24-500476
Ci710 uF, 50 V Aluminum Electrolytic Fixed Axial-Lead Capacitor24-500106
C18-C220.1 wF, 50 V, Ceramic-Disc Radial-Lead Capacitor122002-104
C23100 pF, 100 V, Radial-Lead Epoxy-Dipped Mica Capacitor128002-101"
C2439 pF, 100 V, Radial-Lead Epoxy-Dipped Mica Capacitor128002-390
C25, C260.1 uF, 50 V, Ceramic-Disc Radial-Lead Capacitor122002-104
C27100 pF, 100 V, Radial-Lead Epoxy-Dipped Mica Capacitor128002-101
C290.1 uF, 50 V, Ceramic-Disc Radial-Lead Capacitor122002-104
C300.22 uF, 25 V, Ceramic-Disc Radial-Lead Capacitor122008-224
C31, C320.015 uF, + 10%, 100 V Radial-Lead Epoxy-Dipped Mylar Capacitor21-101153,
C330.22 uF, 25 V, Ceramic-Disc Radial-Lead Capacitor122008-224
C350.1 uF, 50 V, Ceramic-Disc Radial-Lead Capacitor122002-104
C3610 uF, 50 V Aluminum Electrolytic Fixed Axial-Lead Capacitor24-500106
C370.1 uF, 50 V Ceramic-Disc Radial-Lead Capacitor122002-104
C38, C3910 uF, 50 V Aluminum Electrolytic Fixed Axial-Lead Capacitor24-500106
C40-C430.1 uF, 50 V, Ceramic-Disc Radial-Lead Capacitor122002-104
C440.01 uF, 25 V, Ceramic-Disc Radial-Lead Capacitor122005-103
C45-C630.1 yF, 50 V, Ceramic-Disc Radial-Lead Capacitor122002-104
C640.1 uF, 50 V, Ceramic-Disc Radial-Lead Capacitor122002-104
C6850.0018 pF, + 10%, 1 kV, Ceramic-Disc Radial-Lead Capacitor27-102182
C660.1 uF, 50 V, Ceramic-Disc Radial-Lead Capacitor122002-104
Cé70.1 pF, 50 V, Ceramic-Disc Radial-Lead Capacitor122002-104
cé90.1 uF, 50 V, Ceramic-Disc Radial-Lead Capacitor122002-104
C700.1 wF, 50 V, Ceramic-Disc Radial-Lead Capacitor122002-104
c710.01 uF, 25 V, Ceramic-Disc Radial-Lead Capacitor122005-103

c72 0.047 uF, + 10%, 50 V, Axial-Lead Epoxy-Dipped Polycarbonate Capacitor 122010-473

C73-C750.1 wF, 50 V, Ceramic-Disc Radial-Lead Capacitor122002-104
C760.1 uF, 50 V, Ceramic-Disc Radial-Lead Capacitor122002-104
C770.01 uF, + 10%, 100 V, Radial-Lead Epoxy-Dipped Capacitor21-101103
c780.1 uF, 50 V, Ceramic-Disc Radial-Lead Capacitor122002-104
c790.0018 pF, + 10%, 1 kV Radial-Lead Ceramic-Disc Capacitor27-102182

cso 0.047 uF, + 10%, 50 V, Axial-Lead Epoxy-Dipped Polycarbonate itor 122010-473

C81-C840.1 uF, 50 V, Ceramic-Disc Radial-Lead Capacitor122002-104
C8510 pF, 100 V, Radial-Lead Epoxy-Dipped Mica Capacitor128002-100
C86-C1010.1 uF, 50 V, Ceramic-Disc Radial-Lead Capacitor122002-104
C103-C1090.1 uF, 50 V, Ceramic-Disc Radial-Lead Capacitor122002-104
C1102.2 uF, + 10%, 35 V Tantalum Capacitor122000-225
cit22 uF, 25 V Electrolytic Fixed Axial-Lead Capacitor24-250226
C239 pF, 100 V, Radial-Lead Epoxy-Dipped Mica Capacitor128002-390
C113150 pF, 100 V, Radial-Lead Epoxy-Dipped Mica Capacitor128002-151

(Continued on next page)

Page 46

Black Widow

Designator

C114-C116 C117 C118 C119, C120

C121 C122-C126 C127 C129

C130, C131 C132 C134, C135

CRI, CR2 CR3, CR4 CRS CR6

CR7 CR8

L1-L3

AS AG, A7 AS A10

ABO AIB11 AIB12 B1

B10 C1

c7

cg Black Widow Game Printed-Circuit Board Assembly Parts List, continued

Description

Ceramic-Disc Radial-Lead Capacitor Aluminum Electrolytic Fixed Axial-Lead Capacitor V, Radial-Lead Epoxy-Dipped Mica Capacitor 35 V Aluminum Electrolytic Fixed Axial-Lead Capacitor

25 V Electrolytic Fixed Axial-Lead Capacitor V, Ceramic-Disc Radial-Lead Capacitor 100 V, Radial-Lead Epoxy-Dipped Mica Capacitor 100 V, Radial-Lead Epoxy-Dipped Mica Capacitor

0.1 uF, 50 V, Ceramic-Disc Radial-Lead Capacitor 39 pF, 100 V, Radial-Lead Epoxy-Dipped Mica Capacitor 0.1 uF, 50 V, Ceramic-Disc Radial-Lead Capacitor sn gs << a8ss ae

2p oh Fy a os = 8

Bre

. Diodes Type-1N100, 100 V Switching Diode Type-1N914, 75 V Switching Diode Type-1N100, 100 V Switching Diode Type-MV5053 Light-Emitting Diode

Type-1N100, 100 V Switching Diode Type-1N754A, 6.8 V Zener Diode

Inductors 100 vH, + 10%, Hot-Molded Plastic Fixed R.F. Choke (Acceptable substitute is part no. 41-3003)

Integrated Circuits Type-555 Integrated Circuit Type-74S74 Integrated Circuit Type-74LS194 Integrated Circuit Type-TL082 Integrated Circuit

12-Bit Digital-to-Analog Converter Type-MC1495L Integrated Circuit Type-MC1495L Integrated Circuit Type-74LS244 Integrated Circuit

Audio 1/O N-Channel MOS/LSI Custom Chip Type-LM324 Integrated Circuit Type-74S86 Integrated Circuit Type-74S02 Integrated Circuit

Type-74LS194 Integrated Circuit Type-LF13201 Integrated Circuit Type-74LS244 Integrated Circuit Microprocessor

Type-74LS175 Integrated Circuit Type-74LS191 Integrated Circuit Type-74LS194 Integrated Circuit 10-Bit Digital-to-Analog Converter (Continued on next page) Itustrated Parts Lists

Part No.

122002-104 24-350107 128002-221 24-350107

(24-250226 122002-104 128002-390 128002-101

122002-104 128002-390 122002-104

31-1N100 31-1N914 31-1N100 38-MV5053

31-1N100 131002-001

141002-001

37-555 37-74S74 37-74LS194 37-TLO82CP

137158-002 37-1495 37-1495 37-74LS244

C012294-01 37-LM324 137002-001 37-74802

37-74LS194 37-13201 37-74LS244 90-6013

37-74LS175, 37-74LS191 37-74LS194 137160-003

3-25

Page 47

Mustrated Parts Lists Black Widow

Black Widow Game Printed-Circuit Board Assembly Parts List, continued

DesignatorDescriptionPart No.
C11, C12Type-MC1495L Integrated Circuit37-1495,
cid3Audio I/O N-Channel MOS/LSI Custom Chip€012294-01
DSType-LM324 Integrated Circuit37-LM324
D6, D7Type-74LS175 Integrated Circuit37-74LS175
D98-Bit Digital-to-Analog Converter137159-001
D10Type-TLO82 Integrated Circuit37-TLO82CP
D/E11, D/E12Type-TL082 Integrated Circuit37-TLO82CP
E2Type-74LS244 Integrated Circuit37-74LS244
&3Type-74LS00 Integrated Circuit37-74LS00
E4Type-74193 Integrated Circuit37-74193
5Type-74109 Integrated Circuit37-74109
E6Type-74LS175 Integrated Circuit37-74LS175
E7Type-74S00 Integrated Circuit37-74S00
EsType-74LS273 Integrated Circuit37-74LS273
132)10-Bit Digital-to-Analog Converter137160-003
E10Type-LF13201 Integrated Circuit37-13201
F2Type-74LS245 Integrated Circuit37-74LS245
F3Type-74S04 Integrated Circuit37-74S04
F4Type-74LS393 Integrated Circuit37-74LS393
FSType-74LS11 Integrated Circuit137149-001
F6Type-74LS157 Integrated Circuit37-74LS157
F7Type-74LS14 Integrated Circuit37-74LS14
FSType-74LS194 Integrated Circuit37-74LS194
Fo12-Bit Digital-to-Analog Converter137158-002
H2Type-74LS244 Integrated Circuit37-74LS244
H3Type-74LS20 Integrated Circuit37-74LS20
H4Type-74LS393 Integrated Circuit37-74LS393
HSType-74LS20 Integrated Circuit37-74LS20
H6Type-74LS175 Integrated Circuit37-74LS175
H7Type-74LS42 Integrated Circuit37-74LS42
H8Type-74LS194 Integrated Circuit37-74LS194
J2Type-74LS374 Integrated Circuit37-74LS374
J3Type-74LS04 Integrated Circuit37-74LS04
J4Type-74LS161 Integrated Circuit37-74LS161
J5Type-74S260 Integrated Circuit37-74S260
J6Type-74LS32 integrated Circuit37-74LS32
JType-74LS139 Integrated Circuit37-74LS139
J8Type-74LS194 Integrated Circuit37-74LS194
JgVector Generator137179-001
K2Type-74LS175 Integrated Circuit37-74LS175,
K3.Type-74LS74 Integrated Circuit37-74LS74
K4Type-74S10 Integrated Circuit137236-001
K5, K6Type-74LS02 Integrated Circuit.37-74LS02
Ks.Type-74LS157 Integrated Circuit37-74LS157

(Continued on next page)

Page 48

Black Widow

Designator

kg K10

BeaP BRIE

43 Bake

D1 EIF1 H1 J Black Widow Game Printed-Circuit Board Assembly Parts List, continued MWustrated Parts Lists

Description

Type-74LS04 Integrated Circuit Type-74LS175 Integrated Circuit Type-74LS00 Integrated Circuit Type-74LS08 Integrated Circuit

Type-74LS74 Integrated Circuit Type-74LS08 Integrated Circuit Type-7433 Integrated Circuit Type-74LS27 Integrated Circuit

‘Type-74LS164 Integrated Circuit Type-74LS32 Integrated Circuit Type-74LS161 Integrated Circuit Type-74LS157 Integrated Circuit

Type-74LS244 Integrated Circuit Type-74LS157 Integrated Circuit Type-74LS02 Integrated Circuit Type-74LS161 Integrated Circuit

Type-74LS157 Integrated Circuit Type-74LS244 Integrated Circuit Type-74LS 174 Integrated Circuit Type-74LS138 Integrated Circuit

Type-74LS174 Integrated Circuit Type-74LS161 Integrated Circuit Type-74LS245 Integrated Circuit Type-74LS157 Integrated Circuit

Type-74LS32 Integrated Circuit Type-74LS161 Integrated Circuit Type-TL082 Integrated Circuit Type-74LS273 Integrated Circuit

Miscellaneous 8Station Single-Throw, Dual-Inline-Package Bit Switch 8-Station Single-Throw, Dual-inline-Package Bit Switch 4Station Single-Throw, Dual-Inline-Package Bit Switch -15 V Voltage Regulator

+15 V Voltage Regulator 12,096 MHz, + 0.005% Crystal Nylon Snap-in Fastener Test Point (Acceptable substitute is part no. 020670-01)

Read-Oniy Memories Programmable Read-Only Memory Programmable Read-Only Memory Programmable Read-Only Memory Programmable Read-Only Memory (Continued on next page) Part No.

37-74LS04 37-74LS175 37-74LS00 37-74LS08

37-74LS74 37-74LS08 37-7433” 37-TALS27

37-74LS164 37-74LS32 37-74LS161 37-74LS157

37-74LS244 37-74LS157 37-74LS02 37-74LS161

37-74LS157 37-74LS244 37-74LS174 137177-001

37-74LS174 37-74LS161 37-74LS245, 37-74LS157

37-74LS32 37-74LS161 37-TLO82CP 37-74LS273

66-118P1T 66-118P1T 66-114P1T 37-7915

37-7815 144000-001 81-4302 179051-002

136017-101 136017-102 136017-103 136017-104

3-27

Page 49

Mustrated Parts Lists Black Widow

Black Widow Game Printed-Circuit Board Assembly Parts List, continued

DesignatorDescriptionPart No.
K/LAProgrammable Read-Only Memory136017-105
7Programmable Read-Only Memory136017-107
M1Programmable Read-Only Memory136017-106
M2Electrically-Alterable Read-Only Memory137161-001
MIN7Programmable Read-Only Memory136017-108,
N4Programmable Read-Only Memory136002-125,
NIP7Programmable Read-Only Memory136017-109
RIProgrammable Read-Only Memory136010-111
R2Programmable Read-Only Memory136010-112
R7Programmable Read-Only Memory136017-110

Random-Access Memories

K7* Random-Access Memory137211-001
NIP1Random-Access Memory137211-001

Resistors

R1-R1810 kQ, +5%, Ye W Resistor110000-103
R191kQ, 5%, % W Resistor110000-102
R20-R2210 kQ, +5%, % W Resistor110000-103
R231kQ, +5%, % W Resistor110000-102
R24-R4110 kQ, +5%, % W Resistor110000-103
R42220 kQ, +5%, % W Resistor110000-221
R43, R441MQ&, +5%, % W Resistor110000-105
R45100 kQ, +5%, % W Resistor110000-104
R4622 kQ, 5%, % W Resistor110000-223
R471kQ, +5%, % W Resistor110000-102
R481MQ, +5%, % W Resistor110000-105
R493.9 kQ, +5%, % W Resistor110000-392
R50100 kQ, +5%, % W Resistor110000-104
R511kQ, +5%, % W Resistor110000-102
R523.9 kQ, +5%, % W Resistor110000-392
R53, R543.3 kQ, +5%, % W Resistor110000-332
R551kQ, +5%, Vs W Resistor110000-102
R564.7 kQ, +5%, % W Resistor110000-472
R572.2 kQ, +5%. Vs W Resistor110000-222
R5810 kQ, +5%, % W Resistor110000-103
R591.2 kQ, 5%, % W Resistor110000-122
R603.9 kQ, +5%, % W Resistor110000-392
R61-R6810 kQ, +5%, % W Resistor110000-103
Reg22 kQ, +5%, % W Resistor110000-223
R7068 kQ, 5%, % W Resistor110000-683
R711kQ, +5%, Va W Resistor110000-102
R7210 kQ, +5%, % W Resistor110000-103
R73220 kQ, +5%, % W Resistor110000-221

3-28 (Continued on next page)

Page 50

Black Widow

Black Widow Game Printed-Circuit Board Assembly Parts List, continued

Description

R100, R101 R102, R103 R104-R106 R107

R108-R113 R114-R119 R121-R127 R128-R131

R133-R135 R136-R138 R139-R143 R144-R148

R149 R150 R151 R153

R152 R154 RISS R156

R158 R159 R160 R161

R162, R163 R164 R165-R168 R169, R170

R173-R175 R176 R177 R178 100 kQ, +5%, % W Resistor 1kQ, +5%, % W Resistor 680 , +5%, % W Resistor 820 2, +5%, % W Resistor

10 kQ, +5%, % W Resistor 7.5 kQ, +1%, % W Resistor 3.9 kQ, 5%, % W Resistor 100 Q2, +5%, % W Resistor

10 kQ, +5%, % W Resistor 820 2, +5%, % W Resistor 7.5 kQ, +1%, ¥% W Resistor 500 © Vertical PCB-Mounting Cermet Trimpot (Acceptable substitute is part no. 19-315501)

7.5 kQ, + 1%, % W Resistor 220 kQ, +5%, % W Resistor 1kQ, +5%, % W Resistor 150 Q, +5%, % W Resistor

1kQ, +5%, % W Resistor 470 Q, +5%, % W Resistor 1kQ, +5%, % W Resistor 470 2, +5%, % W Resistor

470 2, +5%, % W Resistor 10 kQ, +5%, % W Resistor 1kQ, +5%, % W Resistor 470 2, +5%, % W Resistor

1kQ, 5%, % W Resistor 15 kQ, +5%, % W Resistor 470 2, +5%, % W Resistor 68 O, +5%, % W Resistor

1kQ, +5%, % W Resistor 470 2, +5%, % W Resistor 22 kQ, 5%, V% W Resistor 1kQ, +5%, Y% W Resistor

470 Q, +5%, Vs W Resistor 10 kQ, +5%, % W Resistor 1kQ, +5%, % W Resistor 15 kQ, +5%, % W Resistor

7.5 kQ, +1%, % W Resistor 560 2, +5%, % W Resistor 7.5 kQ, +1%, % W Resistor 470 2, +5%, vs W Resistor

2.2 kQ, +5%. % W Resistor 470 Q, +5%, % W Resistor 15 kQ, +5%, % W Resistor 3.9 kQ, +5%, % W Resistor (Continued on next page) Illustrated Parts Lists

Part No.

110000-104 110000-102 110000-681 110000-821

110000-103 110003-752 110000-392 110000-101

110000-103 110000-821 110003-752

119002-501

110003-752 110000-221 110000-102 110000-151

110000-102 110000-471 110000-102 110000-471

110000-471 110000-103 110000-102 110000-471

110000-102 110000-153 110000-471 110001-680

110000-102 110000-471 110000-223 110000-102

110000-471 110000-103 110000-102 110000-153

110003-752 110000-561 110003-752 110000-471

110000-222 1000-471 110000-153 110000-392

3-29

Page 51

Illustrated Parts Lists Black Widow

Black Widow Game Printed-Circuit Board Assembly Parts List, continued

DesignatorDescriptionPart No.
R17910 kQ, +5%, % W Resistor110000-103
R180680 2, +5%, % W Resistor110000-681
R1812.7 kQ, 5%, % W Resistor110000-272
R1821kQ, +5%, % W Resistor110000-102
R1833.9 kQ2, +5%, V% W Resistor110000-392
R184470 2, +5%, % W Resistor110000-471
R1852.2 kQ, +5%. Ya W Resistor”110000-222
R1863.9 kQ, +5%, % W Resistor110000-392

R187 2 kQ Vertical PCB-Mounting Cermet Trimpot (Acceptable substitute is part no. 19-315202) 119002-202

R1885.6 kQ, +5%, % W Resistor110000-562

R189 10 kQ Vertical PCB-Mounting Cermet Trimpot (Acceptable substitute is part no. 19-315103) 119002-103

R19012 kQ, +5%, % W Resistor110000-122

R192 10 kQ Vertical PCB-Mounting Cermet Trimpot (Acceptable substitute is part no. 19-315103) 119002-103

R193, R194470 2, +5%, % W Resistor110000-471
R196270 2, +5%, % W Resistor110001-271
R196-R1982.2 kQ, +5%. % W Resistor110000-222
R199470 2, 5%, % W Resistor110000-471
R20012 kQ, +5%, % W Resistor110000-123
R2013.9 kQ, +5%, % W Resistor110000-392
R20210 kQ, +5%, % W Resistor110000-103
R203680 2, +5%, % W Resistor110000-681
R2041kQ, 5%, % W Resistor110000-102
R2052.7 kQ, +5%, V% W Resistor110000-272
R2063.9 kQ, 5%, % W Resistor110000-392
R2072.2 kQ, +5%. % W Resistor110000-222
R2083.9 kQ, +5%, % W Resistor110000-392
R209470 2, +5%, % W Resistor110000-471

R210 2 k@ Vertical PCB-Mounting Cermet Trimpot (Acceptable substitute is part no. 19-315202) 119002-202

R2115.6 kQ, +5%, % W Resistor110000-562

R212, R213 10 kQ Vertical PCB-Mounting Cermet Trimpot (Acceptable substitute is part no. 19-315103) 119002-103

R214100 2, +5%, % W Resistor110000-101
R21568 O, +5%, Y% W Resistor110000-680
R2166.8 kQ, 5%, % W Resistor110000-682
R217100 2, +5%, % W Resistor110000-101
R21868 Q, +5%, % W Resistor110000-680
R2196.8 kQ, +5%, % W Resistor110000-682
RV1, RV2Voltage Dependent Resistor110004-001

(Continued on next page)

Page 52

Black Widow

Designator

Black Widow Game Printed-Circuit Board Assembly

Parts List, continued

Description

Sockets 40-Contact Medium-Insertion-Force Integrated Circuit Socket 40-Contact Medium-Insertion-Force Integrated Circuit Socket 40-Contact Medium-Insertion-Force Integrated Circuit Socket 24-Contact Medium-Insertion-Force Integrated Circuit Socket

24-Contact Mediurrinsertion-Force Integrated Circuit Socket 24-Contact Medium-Iinsertion-Force Integrated Circuit Socket 24-Contact Medium-Insertion-Force Integrated Circuit Socket 40-Contact Medium-Insertion-Force Integrated Circuit Socket

24-Contact Medium-insertion-Force Integrated Circuit Socket 24-Contact Medium-insertion-Force Integrated Circuit Socket 24-Contact Medium-Insertion-Force Integrated Circuit Socket 24-Contact Medium-Insertion-Force Integrated Circuit Socket

22-Contact Medium-insertion-Force Integrated Circuit Socket 24-Contact Medium-insertion-Force Integrated Circuit Socket 24-Contact Medium-Insertion-Force Integrated Circuit Socket 24-Contact Medium-Insertion-Force Integrated Circuit Socket 24-Contact Medium-Insertion-Force Integrated Circuit Socket

Transistors Type-2N3904, 60 V, 1 W NPN Transistor Type-2N6044 Darlington NPN Transistor Type-2N3904, 60 V, 1 W NPN Transistor Type-2N3906 PCB Switching and Amplifying Transistor

‘Type-2N3904, 60 V, 1 W NPN Transistor Type-2N3904, 60 V, 1 W NPN Transistor Type-2N3906 PCB Switching and Amplifying Transistor Type-2N3904, 60 V, 1 W NPN Transistor Illustrated Parts Lists

Part No.

34-2N3904 34-2N6044 34-2N3904 33-2N3906

34-2N3904 34-2N3904 33-2N3906 34-2N3904

Page 53

Mlustrated Parts Lists

3-32 TIP32 TOA2002ZA G2 Na Soz OS CR4

Figure 3-13 Regulator/Audio Il PCB Assembly A035435-04 D TDAZ002ZA Q? Black Widow

Page 54

Black Widow Mustrated Parts Lists

Regulator/Audio Il PCB Assembly - Parts List

DesignatorDescriptionPart No.

Capacitors

C1470 uF, 25 V, Aluminum Electrolytic Fixed Axial-Lead Capacitor24-250477
c20.001 uF, 50 V, Ceramic-Disc Axial-Lead Capacitor122002-102
cox]0.1 uF, + 80%, -20%, 50 V, Ceramic-Disc Capacitor122001-104
C4470 uF, 25 V, Aluminum Electrolytic Fixed Axial-Lead Capacitor24-250477
cs0.01 uF, 25 V Minimum, Ceramic-Disc Axial-Lead Capacitor(Accep- .100015-103,/

table substitute is part no. 122005-103)

Ccé0.22 uF, 25 V, Ceramic-Disc Axial-Lead Capacitor122004-224
c70.001 uF, 50 V, Ceramic-Disc Axial-Lead Capacitor122002-102
cB0.22 uF, 25 V, Ceramic-Disc Axial-Lead Capacitor122004-224
ce, c103300 uF, 35 V, Aluminum Electrolytic Fixed Axial-Lead Capacitor24350338
cn0.1 uF, + 80%, -20%, 50 V, Ceramic-Disc Capacitor.122001-104
C12470 uF, 25 V, Aluminum Electrolytic Fixed Axial-Lead Capacitor24-250477
C131000 uF, 25 V, Aluminum Electrolytic Fixed Axial-Lead Capacitor24-250108
C140.01 uF, 25 V Minimum, Ceramic-Disc Axial-Lead Capacitor100015-103,

(Acceptable substitute is part no. 122005-103)

C150.22 uF, 25 V, Ceramic-Disc Axial-Lead Capacitor122004-224
CE0.001 uF, 50 V, Ceramic-Disc Axial-Lead Capacitor122002-102
Cci70.22 uF, 25 V, Ceramic-Disc Axial-Lead Capacitor122004-224
C18, C193300 pF, 35 V, Aluminum Electrolytic Fixed Axial-Lead Capacitor24-350338
C20, C210.1 uF, + 80%, -20%, 50 V, Ceramic-Disc Capacitor122001-104

Diodes

CRIType-1N4002, 1 A, 100 V Silicon Rectifier Diode31-1N4002
CR4Type-1N4002, 1 A, 100 V Silicon Rectifier Diode31-1N4002
CR5-CR8Type-1N5401, 3 A, 100 V Silicon Rectifier Diode31-1N5401

Integrated Circuits

QiType-LM305, 5 V, Linear Voltage Regulator37-LM305
QsType-TDA2002A, 8 W, Linear Audio Amplifier Integrated Circuit137151-002
Q7Type-TDA2002A, 8 W, Linear Audio Amplifier Integrated Circuit137151-002

Resistors

Ri270 Q, +5%, % W Resistor110000-271
R333 2, +5%, % W Resistor110000-330
Ra100 2, +5%, % W Resistor110000-101
RS2.7 2, +5%, 1 W Resistor110009-027
RE3.9 kQ, 5%, % W Resistor110000-392
R77.5 kQ, 5%, % W Resistor110000-752
RB1k@ Vertical PCB-Mounting Cermet Potentiometer(Acceptable19-315102

substitute is part no. 119002-102)

RQ220 2, +5%, ¥ W Resistor110001-221

(Continued on next page)

Page 55

Illustrated Parts Lists

Regulator/Audio I! PCB Assembly Parts List, continued

Designator

R10 RY R12 R13, R14

R19 R20 R21 R22

R24 R27, R28 R29, R30 R32, R33

Q2 Q3 Description

12, +5%, % W Resistor 10 2, 5%, % W Resistor 100 2, +5%, % W Resistor 10 kQ, +5%, Ye W Resistor

19, +5%, Vs W Resistor 102, +5%, % W Resistor 220 Q, +5%, ve W Resistor 100 2, +5%, % W Resistor

0.1 2, +3%, 7 W Wirewound Resistor 1kQ, +5%, % W Resistor 10 2, +5%, % W Resistor 5.6 kQ, 5%, v4 W Resistor

Transistors

Type-TIP32 PNP Power Transistor Type-2N3055 NPN Silicon Transistor

Mechanical Parts

6-Position Connector Receptacle @Position Connector Receptacle 4Position Connector Receptacle 6Position Connector Receptacle

12-Position Connector Receptacle #6-32 x %4-Inch Binder-Head Nylon Screw #6-32 Nut/Washer Assembly Thermally Conductive Silicon Insulator

Thermally Conductive Silicon Insulator #6 x ¥%-Inch Cross-Recessed Pan-Head Thread-Forming Type-AB Zinc- Plated-Steel Screw

Heat Sink Test Point (Acceptable substitute is part no. 020670-01) Black Widow

Part No.

110000-010 110000-100 110000-101 110000-103

110000-010 110000-100 110001-221 110000-101

19-100P 1015 110000-102 110000-100 110000-562

33-TIP32 34-2N3055

79-58306

79-58346 75-F60405 75-995 16 78-16008

78-16014 72-6606S

034531-01 179051-001

Page 56

YOUR COMMENTS, PLEASE!

Your comments will assist Atari in improving our publications. The comments are an important part of preparing for revisions of game manuais. Please write in the space below. No postage stamp is necessary if mailed in the U.S.A.

if you have any technical questions about certain ATARI games products, or are requesting additional publications, we will immediately forward your note to the appropriate person.

Page: Comments:

Fill in if you wish a reply:

Name.

Firm OC Distributor

Address C Operator Gity State Zio T Other. Black Widow 1st printing

Area Code Phone

Page 57

First fold

No Postage Necessary if mailed in the United States

bn} BUSINESS REPLY MAIL — FIRST CLASS PERMIT NO_ 1004 SUNNYVALE, CA a

BUSINESS REPLY MAIL POSTAGE WILL BE PAID BY ADDRESSEE ee

Atari, Inc. | Attn.: Field Service/Coin-Op Division es P. O. Box 427 Sunnyvale, California 94086 Pe a a

Second fold =SOSC*=“*~“—~*s“s*sSs*s*—C—sSsSs‘“SsSSSSS

wooly aBpa siyj adey

Page 58

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 59

SPE EE EE EE

Warranty

Seller warrants that its printed-circuit boards and parts thereon are free from defects in material and workmanship under normal use and service for a period of ninety (90) days from date of shipment. Seller warrants that its video displays (in games supplied with displays) are free from defects in material and workmanship under normal use and service for a period of thirty (30) days from date of shipment. None of the Seller's other products or parts thereof are warranted. If the products described in this manual fail to conform to this warranty, Seller's sole liability shall be, at its option, to repair, replace, or credit Buyer's account for such products which are returned to Seller during said warranty period, provided:

  • Seller is promptly notified in writing upon discovery by Buyer that said products are defective; (b)Such products are returned prepaid to Seller's plant; and (c)Seller’s examination of said products discloses to Seller's satisfaction that such alleged defects existed and were not caused by accident, misuse, neglect, alteration, improper repair, installation, or improper testing. In no event shall Seller be liable for loss of profits, loss of use, incidental or consequential damages. Except for any express warranty set forth in a written contract between Seller and Buyer which contract supersedes the terms herein, this warranty is expressed in lieu of all other warranties expressed or implied, including the implied warranties of merchantability and fitness for a particular purpose, and of all other obligations or liabilities on the Seller's part, and it neither assumes nor authorizes any other person to assume for the Seller any other liabilities in connection with the sale of products by Seller.

SES DISS FES SS

The use of any non-Atari parts may void your warranty, according to the terms of the warranty. The use of any non-Atari parts may also adversely affect the safety of your game and cause injury to you and others. Be very cautious in using non-Atari-supplied components with our games, in order to insure your safety. Atari distributors are independent, being privately owned and operated. In their judgment they may sell parts or accessories other than Atari parts or accessories. Atari cannot be responsible for the quality, suitability or safety of any non-Atari part or any modification includina labor which is performed by such distributor.

Page 60

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.