Zombie Revenge Kit
Zombie Revenge (Rev A) (Sega, 1999) · Kit Manual · 14 pages · 12 sections · original scan
1ST PRINTING MARCH 99
SEGA NAOMI Jamma Compatible Conversion KIT
SEGA ENTERPRISES, INC. USA
MANUAL NO. 999-0784
Warranty
Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating conditions. No other product in this machine is hereby covered.
Sellers sole liability in the event a warranted part described above fails shall be, at its option, to replace or repair the defective part during the warranty period. For Warranty claims, contact your Sega Distributor.
Should the Seller determine, by inspection that the product was caused by Accident, Misuse, Neglect, Alteration, Improper Repair, Installation or Testing, the warranty offered will be null and void.
Under no circumstances is the Seller responsible for any loss of profits, loss of use, or other damages.
This shall be the exclusive written Warranty of the original purchaser expressed in lieu of all other warranties expressed or implied. Under no circumstance shall it extend beyond the period of time listed above.
1 .EXPLANATION OF TEST AND DATA DISPLAY
By operating the switch unit, periodically perform the tests and data check. When installing the machine initially or collecting cash, or when the machine does not function correctly, perform checking in accordance with the explanations given in this section. The following shows tests and modes that should be utilized as applicable.
CAUTIONS TO BE HEEDED WHEN USING THE TEST MODE: In the case where plural machines are linked for communication play, if even one seat enters Gror the test mode, all of the linked seats will enter the test mode. Therefore, if any one of the linked machines is in play, use care so as not to use the test mode.
When performing installation, servicing product or changing game boards refer to individual kit instructions for each of the listed items below:
ITEMS DESCRIPTION
When the machine is installed, perform the following: INSTALLATION | 1. Check to see that each setting is as per standard setting made OF MACHINE at the time of shipment. 2.In the INPUT TEST mode, check each SW and VR.
- In the OUTPUT TEST mode, check each of lamps.
- In the MEMORY TEST mode, check ICs on the IC Board.
Choose MEMORY TEST in the MENU mode to allow the MEMORY MEMORY test to be performed. In this test, PROGRAM RAMs, ROMs, and ICs on the IC Board are checked.
PERIODIC Periodically perform the following: SERVICING 1. MEMORY TEST
- Ascertain each setting.
- In the INPUT TEST mode, test the CONTROL device
- In the OUTPUT TEST mode, check each of lamps.
CONTROL 1. In the INPUT TEST mode, check each SW and VR. SYSTEM 2. Adjust or replace each SW and VR.
- If the problem can not be solved yet, check the CONTROL’s moves|
MONITOR In the MONITOR ADJUSTMENT mode, check to see if the
MONITOR adjustment is appropriately made.
IC BOARD 1. MEMORY TEST
- In the SOUND TEST mode, check the sound related ROMs.
DATA CHECK Check such data as game play time and histogram to adjust the difficulty level, etc
1-2 TEST MODE
System Menu. This test mode mainly allows the IC board to be checked for accurate functioning, monitor color to be
adjusted as well as COIN ASSIGNMENTS and GAME ASSIGNEMENTS to be adjusted.
1.) After turning power on, press the TEST button to have the following test item menu displayed.
2.) Press the SERVICE button to move the arrow. Bring the arrow to the desired item and press the TEST button.
SYSTEM MENU USA VERSION
RAM TEST JVS TEST SOUND TEST SYSTEM ASSIGNMENTS COIN ASSIGNMENTS BOOKKEEPING BACKUP DATA CLEAR CLOCK SETING
ROM BD TEST GAME TEST MODE (ZOMBIE REVENGE IN USA)
->EXIT SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON OPERATION REQUIREMENTS OF THIS GAME: In the SYSTEM ASSIGNMENTS, the CABINET TYPE, to 2 PLAYER(s) and MONITOR TYPE is set to HORIZONTAL.
COIN ASSIGNMENTS intial settings <USA, EXPORT, AUSTRALIA Version> COIN CHUTE TYPE COMMON COIN/ CREDIT SETTING — #12
SEQUENCE SETTING OF COIN ASSIGNMENTS SEQUENCE 1: Number of credits required for Game Start. (intial value=!) SEQUENCE 2: Number of credits required for CONTINUE (intial value=!) SEQUENCE 3-8: NOT USED
MEANING OF DISPLAY IN BOOKEEPING (2/2) P1(P2) SEQ 1: Play frequency of Player 1 (Player 2) P1(P2) SEQ 2: Frequency of CONTINUE by Player | (Player 2) P1(P2) SEQ 3-8: NOT USED
3.) Bring the arrow to the item of Game TEST MODE and press the TEST button to display the GAME TEST MENU
peculiar to ZOMBIE REVENGE. See the next page onward.
4.) Upon finishing the test, bring the arrow to EXIT and press the TEST button to return to the Gam Mode.
before EXITing, the contents of setting changes are ineffective. Be very careful of this
1-3 GAME TEST MODE
(ZOMBIE REVENGE) TEST MENU
INPUT TEST SOUND TEST GAME ASSIGNMENTS STICK SETTING BOOKKEEPING BACKUP DATA CLEAR
->EXIT SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON Bring the arrow to the item of GAME TEST MODE in
the SYSTEM TEST MENU, and press the Test button to
display the TEST MENU peculiar to ZOMBIE RE-
VENGE.
Press the SERVICE button to move the arrow. Bring the
arrow the desired item and press the TEST button.
Upon finishing the test, bring the arrow to EXIT and
press the TEST button to return to the SYSTEM MENU
MODE.
1-4 INPUT TEST
This test displays the state of each switch.
If this switch goes ON when activated, it is satisfactory.
Display varies depending on the JOYSTICK TYPE setting in (3) GAME ASSIGNMENTS.
INPUT T
STARTI :OFF SW_SHOT 10 :OFF SW_SHOT 11 :OFF SW_SHOT 12 :OFF
TEST-SW :OFF IP UP - DOWN 1P LEFT - RIGHT UP - DOWN LEFT - RIGHT
PRESS TEST BUT1 TEST
START2 SW_SHOT SW_SHOT SW_SHOT
SERVICE-SW : (VOLUME_0) : (VOLUME_1) : (VOLUME_4) : (VOLUME_5) :
TON TO EXIT INPUT TEST
START :OFF SW_SHOT 10 :OFF SW_SHOT 11 :OFF SW_SHOT 12 :OFF
SW_UPIL :OFF SW_DOWNI _ :OFF SW_LEFT1 :OFF SW_RIGHTI :OFF
TEST-SW :OFF START2 SW_SHOT 20 : SW_SHOT 21 SW_SHOT 22 :
SW_UP2 SW_DOWN2 SW_LEFT2 SW_RIGHT2
SERVICE-SW
PRESS TEST BUTTON TO EXIT
1P (2P) UP-DOWN shows the minimum value when the Stick is inclined downward, and the maximum value when the
Stick is inclined upward.
1P (2P) LEFT-RIGHT sows the minimum value when the Stick is inclined to the right, and the maximum when the
Stick is inclined to the left. When the Stick is untouched, the CENTER value is displayed. If each of the center,
minimum, and maximum value is within range of 70-8F,00-0F, and FO-FF respectively, it is satisfactory.
If the value is not satisfactory, return to the MENU mode, make adjustment in (4) STICK SETTING, and reconfirm the
value in this test.
Press the test menu to have the MENU return onto the screen.
1-5 SOUND TEST
This allows sound and background used in the game to be checked/ tested.
SOUND TEST
BGM : 00
SELECT WITH SERVICE BUTTON PRESS TEST BUTTON TO EXIT Pressing the service button increase the number by one
and changes the sound.
Press the TEST button to have the MENU return to the
screen.
1-6 GAME ASSIGNMENTS
GAME ASSIGNMENTS Allows game difficulty adjustments to be performed/ changed. SELECTION OF DESIRED ITEM JOYSTICK TYPE DIGITAL 1.) Press the SERVICE button to move the -> and bring GAME DIFFICULTY NORMAL . wae MAX LIFE 256 it to the desired item.
VIOLENCE MODE OFF 2.) Press the TEST btuuon to change the seting. 3.) Afte the device seting is finished, bring the -> to ->EXIT EXIT and press the TEST button.
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON TO EXIT
(A) JOYSTICK TYPE (ANALOG, DIGITAL (NORMAL)) This allows the Control Panel’s JOYSTICK TYPE to be selected.
(B) GAME DIFFICULTY (VERY EASY, EASY, MEDIUM EASY, NORMAL, BITS HARD, MEDIUM HARD, HARD, VERY HARD)
(C) MAX LIFE (128, 256, 384, 512)
Sets the characteer’s “LIFE” value.
(D) VIOLENCE MODE (OFF, ON)
Sets the blood color to ON (red) or OFF(green). This item is displayed for the USA version only and not for EXPORT, KOREA, AUSTRALIA versions.
1-7 STICK SETTING
If the JOSTICK TYPE is set to DIGITAL in (3) GAME ASSIGNMENTS, the ANALOG STICK volume can be
adjusted.
NEW JAMMA ANALOG
MIN CENTER MAX 1P UP - DOWN: 00 80 FF (VOLUME 0)
IP LEFT - RIGHT: 00 (VOLUME 1)
20 UP - DOWN: 00 (VOLUME 4)
20 LEFT - RIGHT: 00 (VOLUME 5 )
PRESS TEST BUTTON TO EXIT
ADJUSTING THE VOLUME VALUE
Starring from the untouched status of 1P (2P) DIGITAL STICK, adjust the Volume value by moving the Stick fully UP/ DOWNILEFT/RIGHT within the maximum movable ranges.
There after, the adjustment is finished if the MENU mode returns when the TEST button is pressed in the status and Stick is untouched.
After adjustment, be sure to check in (1) INPUT TEST to confirm that the value is satisfactory.
If the value is not staisfactory, return to STICK SETTING and adjust the Volume value. If the satisfactory value is not obtained after adjusting several times, then, the STICK may be amlfunctioning.
In the case JOYSTICK TYPE is set to DIGITAL, the following is displayed.
NEW JAMMA DIGITAL
STICK TYPE IS SET DIGITAL!!
PRESS TEST BUTTON TO EXIT
Press the TEST button to have the MENU return to the screen.
1-8 BOOKKEEPING
This test mode allows each of the CREDIT/TIME/GAME data to be ascertained.
BOOKKEEPING GAME REPORT PAGE 1/2
NUMBER OF GAMES 1P GAMES 2P GAMES NUMBER OF CONTINUE 1P GAMES 2P GAMES
TOTAL COIN COIN CREDIT SERVICE CREDIT TOTAL CREDIT
| TOTAL TIME | 0D | OH | OM |
| PLAY TIME | 0D | OH | OM |
| AVERAGE PLAY TIME | 0D | OH | OM |
| LONGEST PLAY TIME | 0D | OH | OM |
| SHORTEST PLAYTIME | OD | OH | 0M |
PRESS TEST BUTTON TO EXIT
(A) NUMBER OF GAMES IP, 2P total game playfrequency. (B) NUMBER OF CONTINUE 1P, 2P continue game playfrequency. (C) TOTAL COIN Total number of times both the COIN CHUTE’S are actuated. (D) COIN CREDIT Number of CREDITS registered by COIN insertion only. (E) SERVICE CREDIT The SERVICE SWITCH usage frequency. (F) TOTAL CREDIT Total number of CREDITS. (G) TOTAL TIME Machine’s total actuated time (excluding the test performance time). (H) PLAY TIME Displays total game play time. (D AVERAGE TIME Average Game play time. (J) LONGEST TIME Displays the longest play time. (K) SHORTEST TIME Displays the shortest play time.
Press the test button to proceed to the next page.
Press the TEST button to have the MENU return to the screen.
Page 2/2 displays by-play-time play frequency.
BOOKKEEPING
TIME HISTOGRAM PAGE 2/2
OMO0S ~ 0M29S
OM30S ~ OM59S
1MO0S ~ 1M29S
1M30S ~ 1MS59S
2M00S ~ 2M29S
2M30S ~ 2MS59S
4MO00S ~ 4M29S
4M30S ~ 4M59S
S5MOOS ~ 5SM29S
5M30S ~ SMS59S
6MO0S ~ 6M29S
6M30S ~ 6M59S
7MOOS ~ 7M29S
7M30S ~ 7M59S
8MOO0S ~ 8M29S
8M30S ~ 8MS59S
9MO0S ~ 9M29S
9M30S ~ 9M59S
OVER
PRESS TEST BUTTON TO EXIT
1-9 BACK UP DATA CLEAR
Clears the contents of BOOKKEEPING.
BACK UP DATA CLEAR
YES (CLEAR) ->NO (CANCEL)
SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON TO EXIT
When clearing bring-> to YES and when not clearing, to NO, by using the SERVICE SW and then push the TEST
button.
When clearing has been finished, COMPLETED will be dislayed.
Pressing the TEST button will have the MENU return to the screen.
2.GAME BOARD
Ensure that the DIP SW setting is performed as designated. Failure to observe this may cause functioning not suitable for the operation, or malfunctioning.
2-1 COMPOSITION OF GAME BOARD
ASSY CASE NAO USA (840-0003D-01) : ZOMBIE USA
SCREW (4) 7 3X30
ROM CASE NAO ZMB
$40-00031-01 ASSY CASE NAOMI ZOMBIE USA
DIP SW SETTINGS
- PARTS LIST
STICKERS AND GRAPHICS
ITEM NO. PART NO.
999-0777
999-0779
999-0780
999-0785
999-0786
999-0787 AURWNE
JOYSTICKS AND BUTTONS
ITEM NO. PART NO.
610-6723-4C0l
58-9133-L
58-9155-L
95-0733-01 RWNE
KIT INSTALLATION INSTRUCTIONS DESCRIPTION
MARQUEE GRAPHIC ZBX KIT INSTRUCTION SHEET ZBX KIT
SUB INSTR SHEET ZBX KIT
CNTRL PNL OVERLAY ZBX KIT
STICKER CABI SIDE L ZBX KIT
STICKER CABI SIDE R ZBX KIT
DESCRIPTION
ASSY ANALOG JOY 4C GREEN
*PUSH BUTTON GREEN
*PUSH BUTTON YELLOW
*MICRO SWITCH SILVER CONTACT
1.) Install VGA Output to Jamma Interface.
2.) Install USB connector to Naomi Filter Board Port.
3.) You can use one of the extra grounds (shown in the picture on the following page) to go out to switched inputs. (The 5V and 12V can be used for whatever you like-coin meter, etc.)
MONITOR INFORMATION
You can use a
Standard Resolution-15,750K x 60 (#1 ON & #2-4 OFF)
or
High Resolution-31,000K x 10 (#1-4 OFF)
DIP SWITCH SELECTABLE
(Switch #1 on NAOMI FILTER BOARD)
XEMR 120V 17v2Ax2 560-5407
POWER AMP 2 CH 838-13616
GAME BD ZOMBIE NAO
SW REGU FOR JVS 400-5397
CONTENTS OF WIRING BAG SEEN ABOVE
120 VAC in SPEAKER 1
to Jamma Interface
*12V Output ep)
gic Ground qwurre)
SPEAKER 2 *5V Output (vELLow)
DOOR, LIGHTS, ETC.)
Sk pot (sound)
Come see SEGA ENTERPRISES’ Service Department Homepage
Netscape: SEU SERVICE HOMEPAGE
® @teanmadcd #8 a = GoTo: dL http :/ /www.seuservice.com/SEGASERYICE /mainpage.html
BULLETINS
PART NUMBERS
GAME MONITORS
BOARD SYSTEMS
MAILING LIST
SEGA DISTRIBUTORS
SERVICE STAFF
DARL'S OFFICE
[¥2K COMPLIANCE]
Sega Enterprises Inc.,USA Service Department Phone (650)-632-7580 Fax (650)- 632-7594
Best Viewed with
AI” what’s Related
[what's new] [Manuals] [Bulletins] [Part Numbers] [Game Monitors] [Board Systems) [Mailing List] [SEGA Distributors] [Service Staff] [Darl's Office] [Samples]
Coin-Op Links:
Star Tech Journai
Amusement industry Mega Site
if you have any questions about this Home Page please E-Mail to:
dari. davidson@seu.sega.com OR fan.rockhili@seu.sega.com
A total of PRY YE Wy people have accessed this page.
SEGA ENTERPRISES, INC. (USA)
45133 Industrial Drive Fremont, CA 94538 (650) 632-7580 phone (650) 632-7594 fax