Maximum Tune 2 Link Kit
Maximum Tune 2 (Namco) · Kit Manual · 2 pages · original scan
Page 1
namco
MAXIMUM TUNE 2
LINK KIT
Kit Contents:
Switching Hub .. es | Link Cable wd
Ensure that the game is functioning correctly before fitting the Link Kit.
- Disconnect the existing link cable from the Player 2 Game pcb and reconnect to the Switching Hub.
- Remove the existing Link cable from the second cabinet and connect it between the Player 2 Game pcb and the Switching Hub.
- _ Fit the new Link cables between Player 3 Game pcb and the Switching Hub, and Player 4 Game pcb and the Switching Hub.
Link Cable Connection
Communication cable
Chihiro Chihiro Chihiro
Player 2 Player 3 pcb peb
Issue 1
Page 2
- Disconnect the 2way connector from the Bass Amp pcb and connect the Hub Power Connector assy.
- Reconnect the 2way connector to the Power Hub Connector assy
Hub Power Connector Assy
Bass Amp pcb
BASS AMP [oe - PCB |
- Enter the Test mode (Game Options) and ensure that the Game PCB ID’s are set to 1~4