CATHODE RAY TOMES

VS Table Type Operation Manual (MDS-TBL)

VS.SYSTEM (Nintendo) · Document · 24 pages · 5 sections · original scan

Page 1

Vo.SYoTEM

VS SYSTEM TABLE TYPE MODEL NO: MDS-TBL MODEL NO: MDS-TBL-US

OPERATION MANUAL

Page 2

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 3
WARNING

This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures may be required to correct the interference.

WARNING

Use of non-Nintendo parts or modifications of your Nintendo game circuitry may adversely affect the safety of your game, and may cause injury to your players.

Page 4

cI TABLE OF CONTENTS (—)

  • Game Specifications -----::-:-- cc renee 1
  • Game Installation 2-1 Installation Precautions -----+eeseeerreceeeeeeeee resets ee ee rene eteees 2-2 Adjustment of Table Height ---- 2-3. Grounding of Game
  • Game Adjustments 3-1 Video Monitor 3-2 MDS P.C. Board 5
  • Wiring and Connection ---------::::-ereeeeeeeeee eee tee ete t eter eee ees 6~7
  • Parts Information 5-1 Cabinet -eeccceeeeeeceeeeeeeeeceeeeeeeceeceueesenaneeeeesseeseeeeseeees 8~9 5-2 Operation Panel Assy --- 5-3 Video Monitor -----+++-++++ 5-4 Wiring Harness--------++++- 5-5 MDS P.C. Board Assy 5-6 Power Supply Assy ---
Page 5
  • Game Specifications

qd

(2

(3

(4 ) Electrical Rating

) Length of Power Cord

) Power Consumption

) Game Dimensions

  • Weight
  • Number of Players
  • Cash Box Capacity
  • Accessories AC120V +10% 60Hz

5m

130W

690(W) X 970(D) X 880(H)mm

Note: Height does not include the hinge on top of the game. (Height Adjustment: 880, 910, 940, 970, 1000, 1030mm)

95 Kgs

1, 2, or 4 person(s)

Note: Depends upon Game Software.

Approximately 1600 pcs.(Quarter Size)

Operation Manual : 1 copy Key for Table Lock : 4 pes. Key for Cash Box : 2 pes. Fuse 5AX 1, 3A(Slow Blow) X 2 2.5A(Slow Blow) X 2, 2A(Miget) x 1 Bolt (M8 X15) with washer : 2 pcs. Schematics

Note: Specifications are subject to change because of subsequent improvements in design.
Page 6
  • Game Installation

2-1 Installation Precautions

  • This game should be handled with extra care and caution. The glass and the electronic components may be damaged if the game is mishandled.
  • Use an AC 120V +10% three terminal outlet as a power source. (If only a two terminal outlet is available, see section 2-3 for grounding instructions.) This game should not be used with an AC outlet circuit that also supplies a motor or a generator, as this may cause excessive voltage variations on the AC line.
  • Turn the power off before inserting or removing the P.C. Board and Connectors. Handle them carefully.
  • Do not touch IC, LSI, or other electronic parts on the P.C. Board. Since test equipment may damage the components, please contact a qualified service technician if problems exist.

5)When replacing a bad fuse, use a fuse with the same current and voltage rating.

  • This game should not be installed where extreme temperatures may exist. Keep away from heating appliances and direct sunshine.
  • Do not touch the inside of the video monitors, since extremely high voltages are present and can be dangerous. Please contact a qualified service technician if problems exist.
  • If this game is installed in a damp place it should be grounded to avoid injury from an electric shock.

2-2 Adjustment of Table Height

The table height can be adjusted for 6 different positions (approximately 880, 910, 940, 970, 1000, 1030 mm from floor to top of game).

M8 Bolt ge

(Width across flat is 12mm)-~~

Page 7

2-3 Grounding of Game

The Grounding wire should be connected to a grounding bar 1) or a metal pipe which is firmly inserted into the ground.

  • Do not connect the grounding to a water pipe, because polyvinyl-chloride pipes are sometimes used in water lines, and the electronic continuity to the ground may be interrupted.
  • Absolutely do not connect the grounding wire to a gas pipe, as this can be extremely dangerous.

YY

Page 8
  • Game Adjustm

3-1 Video Monitor

i — DEGAUSS SWITCH

Fuse (Slow Blow) 3A, 125V

Fuse (Slow Blow) 2.5A, 125V

V-Lin- Sub Brightness“ Sel Positive/Negative Video Switch B Gain 2 G Gain =

Caution: Do not touch the inside of the video monitor, since extremely high voltages are present. Only a qualified service technician should attempt repairs if problems exist.
Page 9

3-2 MDS P.C. Board

MDS-CPU

Component Side

Cautions: 1) Since the Dip Switch settings (SW1, SW2) may be changed by new game software, refer to the new game instructions attached.

2)Do not touch the fixed variable resistors (VR1, VR2, VR3, VR4, VR5, and VR6), as they have already been preset and do not need adjustment.

Page 10
  • Wiring and Connection

TBL-44p-062 EDGE HARNESS TaN

a[GNDBROWN F777) enoptt
2[GNDleo 2/2] onosee
=|onopeaiak FT] on“hp

3 | F5v af] sav

|ctvoREEN Tete] vyPower Supply
Ssa[ov|SLUE Tete] +5v PP-1 100A
atav1PURPLE TST?) + 5v

aes ape

Ee+i2vWHITE JoTo] t2av

© F 7S _coni iw CONT aS CONz Tp wconz | ots RED K [MRED oS GREEN L_[M GREEN, TT VIDEO GND. wT VIDED GND 2] Ss BLUE N TM BLUE 13] S SYNC OM SYNC ra a | EMER S| SPEAKER! ie] 42av T | F2av 17] S-CoUNTER UP Wr COUNTER @ v

  • LS SERIE
qa|SHIELONG wine
=|x Tar souND_}|} +):
aryown ft Y| =
CPU PCBZ[GndHeoHYse8 §
MDS-CPUiAeoFEESAE)22)Peer)pep
eer}bee)feb)bet)behetsAbe
Tona+7ga4gqa.§
[ONDj#3aéa| 3aS 5
2 | Si RIGHTEEEsa] 3so 8a=
[MT RIGHTMsMsby
3] SI LeFT1|25,
SIa] si_uP4-180 SERVICE SwTOH3-100 couNnTER“Pessow con
MIPNanwessWane ssBrora

S| st Bown

eeesnow 7 980'0z0un‘om|
‘6 [si A SWITCHNTT znRIGHTNTT veRIGHT
FMA SwITORfeo ty pz} AED.ter |sed [fpf FEcer |
FAETEETICHEE esana [575 | 8Mue
erevectow St freuiowtomLaw Fs PH YELLOWsown |
Faeancen tft aren!oreen ttt cate{
| MSELECTTeLv8 Te te BEseteo!BLUE Fe fs} BE oo setecr |
9 _[ S-SELeOTsPURPLE [7 PURPLEsevcor3 |Pure [7 [7 | PURPLESELECTS |
parsersmoeseuecr |roa
wssecect2wnrte To fof WATEseLecis |ware fo ff waesetecrs |
[we sELoraBLAcK Tipp] SuAckIBLACK Fofasf BLACKI
wpe seeritiaf\
We]SELECTSvennow [aha] venLow|vet.ow fof yeunow!
of So. Rreet Fah ENasus |Set Tp aesmn!
ee sieBAO PSY Lack|Lack PET atom|
® [M2 LEFTt'i'
eso Ue|1___ sus conrgon____|
Twa UP:r1'i
[52 Dowiii\
cy‘s_ [M2 DOWNTh eoRionT |BROWN F717] BROWNrant |
S16 [S2-A SuIToHfa} BbttaeD fafa} BEDvert |
f=Peeteeensoypms 9 pomso*|
7 ]S2-8 SMITOHeg etaoom |veLLon Ts PapELLow 5 foun |
ne eosfeta1nee fae oe
exoa'oe
aNcae\oe:
Byap okayASWITCH |SAY qT gL GRAYA swiTcH |
TBL.36P-062fap HEoqo sures Hvworre FSFE] wareogo sion !
EDGE HARNESSTaf BLACKHBLACK Tighig} BLACKi
nif!ihI
2] 1]i1
+aw coven ___ |er ee
Page 11

Power Transformer PT-I1B1A (80-120V)

‘AQIO0V TOA

I

gq OO! .

imi s] Power Cord

SHIELDING WIRE, es

BROWN F7T7 | BROWN, T]T]M GREEN eo EY neo ta] cb RANGE FP | Osan 3[3]m BLUE vero} ff vercow P14 8 Foren PST cree ef One sue Pepa C0 ele} tof] m sim WOEO HARNESS | { {

swetono wine | sao a rrp -8200 9 bet souno ZI2|on0 212) -2P-800 aT3 ba AUDIO HARNESS VIDEO MONITOR MAIN PCB

VIDEO MONITOR M

WATE poy waite neo HT ep SPEAKER 2°-600 SPEAKERLL=I 9p. 200, TV HARNESS: SPEAKER HARNESS aeomrrT eins oreen ane 2tance T2129 FED vencont tf vextow F444 § BLUE VIDEO MONITOR ‘ata fa] ond [oncen 421 oneen fe 4S) ON? MAIN PCB Sue LUE fo} fol] s sync woeo KaRNess |

SHEELONG wRE | ama THe AFT] s souno 2]2 2/2] ono wa Efe ‘AUDIO HARNESS

VIDEO MONITOR S

wre yp waITE neo} ~ ae SPEAKER 2°-600 SPEAKER 2-290 TV HARNESS. SPEAKER HARNESS.

Page 12

5.Parts Information

5-1 Cabinet Parts

Page 13

5-1 Cabinet Parts

ITEM PART No. DESCRIPTION

1MDST-10-11MDS-TBL Upper Box
2MDST-10-12MDS-TBL Upper Cover
3MDST-10-13MDS-TBL Lower Box
4MDST-10-14MDS-TBL Leg Support Bracket
5MDST-10-15MDS-TBL Leg
6DJRT- 81-06Leg Adjuster
7MDST-10-16MDS-TBL Leg Support Bar
8MDST-11-11MDS-TBL Inspection Door
9DJRT- 81-12Cash Box
10TKGU-01-11Game Counter E607
11DJRT- 81-31Service Switch Frame
12TKGU-01-33Service Switch with Button
13MDST-11-19MDS-TBL Top Cover
14MDST-13-12Video Monitor Bezel (Black)
15MDST-12-11MDS-TBL Screen Filter
16MDST-13-15MDS-TBL Glass
17DJRT- 82-09Water Tight Packing 1000L X 3T (Black)
18MDST-12-12Water Tight Packing 1000L X 2T (Black)
19MDST-11-21Table Glass Retaining Frame
20MDST-11-22Top Cover Hinge
21MDST-11-26Coin Slot Bezel ADD-FT3
22MDST-12-15Coin Slot ADD-FT5 (For 25cent)
23MDST-11-27Coin Slot Spring 20
24MDST-11-29Coin Slot Panel W
25MDST-12-16Plastic Instruction Label Cover
26MDST-10-19062 Operation Panel Complete Assembly
27MDST-33-01Video Monitor XM-1801N
28MDST-31-10PT-1181A Power Transformer Unit
29MDST-32-10PP-1100A Power Supply Unit
30MDST-21-11MDS P.C. Board Assembly
31MDST-34-11Speaker 10CM (10PB938A)
32TMAU-14-14Lock K6510
33MDST-14-11Cash Box Door Lock CVZ-N (Magnetic Lock)
34TMAU-14-18Coin Selector AD-81P (For 25cent)
35TMAT-34-11Micro Switch ADD D2MC-5F1
36TKGU-01-10Strain Relief Bushing R6A (For Power Cord)
37TKGU-01-08Power Cord 5MUL
Page 14

5-2 Operation Panel Assembly

oD

o\ 7\\_9 \ YY, | —\Q>9 cae AK

\ a\WAI W\\

\ \S 8 Way Control Lever Assy

AW AY @

Page 15

5-2 062 Operation Panel Assembly

ITEM PART No. DESCRIPTION

1MDST-14-12A8& Control Lever Assembly
2TKGU-23-21Switch Collar
3TNX- 23-188 Way Guide Plate
4TKGU-23-27Switch Spacer
5TKGU-23-16Bearing Bracket
6TKGU-23-20Spring Stopper
7TKGU-23-22Lever Spring
8TKGU-23-23E Ring 4
9TKGU-23-13Micro Switch VL12L (Bend)
10TMAU-12-15Lever Plate
1TMAU-12-14Control Knob Plate 28D
12TMAU-12-16Control Knob Collar 8L
13TMAU-11-18Control Knob with Shaft 80.5L
14MDST-11-32062 Operation Panel Base
15MDST-11-31062 Operation panel Only
16TKGU-23-12Switch Button Bracket
17TMAU-34-18Micro Switch VL12L
18TKGU-23-10Micro Switch VL105L2
19TKGU-23-26Nut Plate M3
20TKGU-23-34Pal Nut M16
21MDST-12-17Button Assembly (Crimson)
22MDST-12-21Button Assembly (Black)
23MDST-12-24Button Assembly (Light Blue)
24MDST-12-27Button Assembly (Green)
25MDST-12-31Button Assembly (Purple)
26MDST-12-34Button Assembly (Yellow)
27TMAU-12-18Collar 34 28 7H
28TPPT- 23-33Collar 34 28 X 15H
Page 16

5-3 Video Monitor XM-1801N

Page 17

5-3 Video Monitor XM-1801N

ITEM PART No. DESCRIPTION

1TPPU- 93-076P-600 Video Harness (600mm)
2MDST-33-16Horizontal Output Transistor 2SD870
3MDST-33-15Flyback Transformer F1408
4MDST-33-12Video Monitor Main P.C. Board 1801N
5MDST-33-17Yoke Coil H1394
6MDST-33-18CG Purity Magnet F3006
7MDST-33-13Video Monitor CRT P.C. Board 1801N
8MDST-33-11Video Monitor Picture Tube
9MDST-33-23Grounding wire 1801N
10MDST-33-14Degaussing Coil GO205
1MDST-33-20Audio Output Transformer SOO86
12MDST-33-222P-100 Sound Harness (100mm)
13MDST-33-212P-600 Speaker TV Harness (600mm)
14MDST-33-19AC Power Cord DO017
15DJRT- 89-022P-800 Audio Harness (800mm)
Page 18

5-4 Wiring Harness

PART No. DESCRIPTION See Page 6~7 MDST-41-13 TBL-44P-062 Edge Connecting Harness MDST-41-14 TBL-36P-062 Edge Connecting Harness DJRT- 89-03 3P-100 Counter Harness (100mm) DJRT- 89-04 4P-150 Service Switch Harness (150mm) MDST-41-16 4P-480 W Coin Harness (480mm) MDST-41-11 TBL-15P-062 Switch Harness MDST-41-12 TBL-12P-062 Switch Harness

PART No. DESCRIPTION See Page 12 DJRT- 89-02 2P-800 Audio Harness (800mm) TPPU- 93-07 6P-600 Video Harness (600mm) MDST-33-21 2P-600 Speaker TV Harness (600mm) MDST-33-22 2P-100 Sound Harness (100mm)

Page 19

5-5 MDS P.C. BOARD ASSEMBLY

PART No. DESCRIPTION (Reference Designations and Locations) MDST-21-11 P.C. Board Assembly

MDST-21-122A03 Microprocessor(2J, 8)
MDST-21-13HM6116 2kxX 8bit Static RAM, 250ns(1E, 6E)
MDST-21-14MB8416-15 2kxX 8bit Static CMOS RAM 150ns(8L)
MDST-21-15TC5533P-A 4kX 8bit Static RAM(2C)
MDST-21-16TC5533P-B 4kxX 8bit Static RAM(8C)
MDST-21-1774LS00 Quad 2-input NAND LS TTL(4C, 5C)
MDST-21-1874LS04 Hex Inverters LS TTL(1L, 2K, 4E, 5E)
MDST-21-1974LS10 Tri 3-input NAND LS TTL(4D)
MDST-21-2074LS32 Hex 2-input AND LS TTL(4A, 4B, 5A, 5B)
MDST-21-2174LS74 Dual D-Flip Flops LS TTL(5D)
MDST-21-2274LS123 Dual Retriggable Single Shots LS TTL(1J)
MDST-21-2374LS138 Dual 2 to 4 Demultiplexers LS TTL(1F, 6F)
MDST-21-2474LS157 2 to 1 Data Selectors LS TTL(5J, SK, 6J, 6K)
MDST-21-2574LS165 8bit Shift register LS TTL(6M, 6N, 7P, 8P)

MDST-21-26 74LS240 Octal 3 State Bus Inverters LS TTL (7M, 7N, 8M, 8N)

MDST-21-2774LS245 Octal 3 State Bus Tranceivers LS TTL(3K, 8K)
MDST-21-2874LS373 Octal 3 State D-Latchs LS TTL(2E, 8E)
MDST-21-2974F04 Hex Inverters FAST TTL(5H)
MDST-21-304066 Quad Analog Switches C-MOS(2P, 4P)
MDST-21-31LM324 Hex Operational Amplifiers(1P, 3P)
MDST-21-32LM3900 Hex Operational Amplifiers(5N, 5R)
MDST-21-33PST518A Reset IC(1K)

MDST-21-34 2SA933 Silicon PNP Transistor (Q3, Q7, Q138~Q16, Q19~Q22, Q26, Q27) MDST-21-35 2SC1740 Silicon NPN Transistor (Q1, Q2, Q4~Q6, Q8, QY, Q12, Q17, Q18,Q23~Q25) MDST-21-36 2SD592 Silicon NPN Transistor (Q10, Q11) MDST-21-37 1S953 Silicon Switching Diode (D1, D2,D5,D7, D9~D11)

MDST-21-38WO3B Silicon Diode(D3, D4, D6, D8)
MDST-21-39270, 1/4W +5% Resistor(R4)

MDST-21-40 330 1/4W +5% Resistor (R22, R30, R36, R38, R45~R47, R72, R89) MDST-21-41 1009 1/4W +5% Resistor (R79, R80, R95, R97) MDST-21-42 3300 1/4W +5% Resistor (R8, R20, R28, R29, R48, R49, R70, R71, R73, R91)

MDST-21-436800 1/4W +5% Resistor(R119)

MDST-21-44 1KQ 1/4W +5% Resistor (R31, R82, R92, R93) MDST-21-45 1.2KO 1/4W +5% Resistor (R37, R43) MDST-21-46 2.2KQ 1/4W +5% Resistor (R6, R11, R12, R14, R15, R23, R24, R27, R39~R42, R50, R51, R54, R55, R64, R65, R68, R69, R81, R87)

MDST-21-473.3KQ 1/4W +5% Resistor(R77)

MDST-21-48 4.7KQ 1/4W +5% Resistor (R13, R17, R25, R26, R52, R53, R66, R67)

Page 20

PART No. DESCRIPTION (Reference Designations and Locations) MDST-21-49 10KQ 1/4W +5% Resistor (R3, RS, R7, R16, R18, R19, R21, R33, R56~R63, R75, R82, R83, R85, R86, R120)

MDST-21-5012KQ 1/4W +5% Resistor(R76, R96, R98)
MDST-21-5120KQ 1/4W +5% Resistor(R94, R9Y)
MDST-21-5233KQ 1/4W +5% Resistor(R1, R2)

MDST-21-53 100KQ 1/4W +5% Resistor (R10, R385, R84, R103, R121)

MDST-21-54150KQ 1/4W +5% Resistor(R74, R118)
MDST-21-55S60KQ 1/4W +5% Resistor(R107, R114)

MDST-21-56 750KQ 1/4W +5% Resistor (R101, R108, R109, R110, R115, R116)

MDST-21-571MQ 1/4W +5% Resistor(R102, R106, R112, R117)
MDST-21-581.8MQ 1/4W +5% Resistor(R90, R105)
MDST-21-592.2MQ 1/4W +5% Resistor(R81, R87, R100, R104)

MDST-21-60 1KQX8 Series Resistor Array (RM1, RM2, RM5, RM8, RM11, RM14, RM17) MDST-21-61 6804 Parallel Resistor Array (RM3, RM4, RM6, RM7, RMY, RM10, RM12, RM13, RM15, RM16)

MDST-21-6233pF 50V Ceramic Disc Capacitor(C35, C91, C92)
MDST-21-6368pF 50V Ceramic Disc Capacitor(C25, C86)
MDST-21-64100pF 50V Ceramic Disc Capacitor(C38, C42, C43, C46)
MDST-21-65220pF 50V Ceramic Disc Capacitor(C26~29, C34, C45)
MDST-21-660.014F 50V Ceramic Disc Capacitor(C9, C10, C89, C90)
MDST-21-670.14F 25V Ceramic Disc Capacitor(C100~C178)
MDST-21-680.24F 12V Ceramic Disc Capacitor(C4, C12)
MDST-21-690.0474F 50V Film Capacitor(C37, C39, C40, C44)

MDST-21-70 3.3uF 16V Al. Electrolytic Capacitor (C15~C18, C31, C32)

MDST-21-7110uF 16V Al. Electrolytic Capacitor(C3, C5, C6, C11, C13,

C14, C19~C24, C30, C33, C36, C41, C47~C85)

MDST-21-7247uF 16V Al. Electrolytic Capacitor(C2)
MDST-21-73100uF 16V Al. Electrolytic Capacitor(C1)
MDST-21-74100uF 25V Al. Electrolytic Capacitor(C8)
MDST-21-75470uF 16V Al. Electrolytic Capacitor(C7, C87, C88)
MDST-21-76500 Variable Resistor. Red Cap(VR1, VR3)
MDST-21-775000 Variable Resistor. Green Cap(VR2, VR4)
MDST-21-78500Q Variable Resistor. Blue Cap(VR5, VR6)
MDST-21-7921.47727MHz Crystal(X1)
MDST-21-808 position dip switch(SW1, SW2)

MDST-21-81 28P IC socket (1A, 1B, 1C, 1D, 2A, 6A, 6B, 6C, 6D, 8A, 8B)

MDST-21-8240P IC socket(2F, 2, 8F, 8)

MDST-21-83 Type 32-4 (UM3X 2) Battery Case MDST-21-84 Bolt with washer M2.6 MDST-21-85 Flat washer M2.6 MDST-21-86 Nut Plate M2.6 MDST-21-87 Dry Battery “AA” T18L Beaded tie

Page 21

5-6 Power Supply Assy PP-1100A

PART No. DESCRIPTION (Reference Designations and Locations) MDST-32-10 Power Supply P.C. Board Unit

MDST-32-112SC2334 Transistor(Q1, Q4)
MDST-32-122S8C3047 Transistor(Q2)
MDST-32-132SA1010 Transistor(Q3)
MDST-32-14ERC80-004 Schottky Barrier Diode(D5)
MDST-32-15RD13EB Zener Diode(D4)
MDST-32-16ERB44-02 Fast Recovery Diode(D1)
MDST-32-17ERB44-04 Fast Recovery Diode(D2)
MDST-32-18ESAC82-004 Fast Recovery Diode(D3)
MDST-32-19MZH-860 Hybrid IC(HIC1)
MDST-32-20MZH-870 Hybrid IC(HIC2)

MDST-32-21 MB3759 Pulse Width Modulated Control Circuit (IC1, IC2)

MDST-32-22SM-type 35V 220uF Electrolytic Capacitor(C1)
MDST-32-23SM-type 16V 10,F Electrolytic Capacitor(C2, C3, C16)
MDST-32-24ECES 2DV331S Electrolytic Capacitor(C8)
MDST-32-25SM-type 16V 3300,4F Electrolytic Capacitor(C13, C15)
MDST-32-26SM-type 35V 33,yF Electrolytic Capacitor(C14)
MDST-32-27SM-type 16V 1000mF Electrolytic Capacitor(C20)
MDST-32-28ST-type 16V 10,F Electrolytic Capacitor(C17)
MDST-32-2950V 0.22uF Polyester Capacitor(C4)
MDST-32-3050V 0.033uF Polyester Capacitor(C10)
MDST-32-3150V 0.14F Polyester Capacitor(C18)
MDST-32-3250V 0.068uF Polyester Capacitor(C11)
MDST-32-3350V 0.0047uF Polyester Capacitor(C12)
MDST-32-3450V 0.0022uF Polyester Capacitor(C19)
MDST-32-35400V 0.01u4F Polyester Capacitor(C9)
MDST-32-36125V 0.22uF Metallized Polyester Capacitor(C5)
MDST-32-37400V 0.0022u4F Ceramic Capacitor(C6, C7, C21)
MDST-32-38RVF6P01-502 Variable Resistor(VR1)
MDST-32-39RVF6P01-202 Variable Resistor(VR2)
MDST-32-40RVF6P01-103 Variable Resistor(VR3)
Page 22

PART No. DESCRIPTION (Reference Designations and Locations)

MDST-32-411000 5W +5% Cement Resistor(R29)
MDST-32-420.10 2W +5% Cement Resistor(R25)
MDST-32-430.20 2W +5% Cement Resistor(R26)
MDST-32-4475Q 3W +5% Metal Oxide Resistor(R11)
MDST-32-45330 2W +5% Metal Oxide Resistor(RQ)
MDST-32-4647KQ 1W +5% Metal Oxide Resistor(R8)
MDST-32-47150 1W +5% Metal Oxide Resistor(R10)
MDST-32-481000 1W +5% Metal Oxide Resistor(R13)
MDST-32-491500 1/4W +5% Carbon Resistor(R1)
MDST-32-501009 1/4W +5% Carbon Resistor(R2)
MDST-32-5115KQ 1/4W +5% Carbon Resistor(R3)

MDST-32-52 4.7KQ 1/4W +5% Carbon Resistor (R4, R19, R20, R22)

MDST-32-533900 1/4W +5% Carbon Resistor(R5, R7)
MDST-32-5410KQ 1/4W +5% Carbon Resistor(R6, R15)
MDST-32-55330 1/4W +5% Carbon Resistor(R12)
MDST-32-568200 1/4W +5% Carbon Resistor(R14)
MDST-32-571.8KQ 1/4W +5% Carbon Resistor(R17)
MDST-32-58100KQ 1/4W +5% Carbon Resistor(R18)
MDST-32-595600 1/4W +5% Carbon Resistor(R21)
MDST-32-6033KQ 1/4W +5% Carbon Resistor(R23)
MDST-32-612200 1/4W +5% Carbon Resistor(R24)
MDST-32-623300 1/4W +5% Carbon Resistor(R27)
MDST-32-63620 1/4W +5% Carbon Resistor(R28)
MDST-32-641.5KQ 1/4W +5% Carbon Resistor(R16)
MDST-32-65WO4M Rectifier(REC1)
MDST-32-66DR 8X11, L5 Choke Coil(L5)
MDST-32-67DR 22X14, H7C2 Choke Coil(L3)
MDST-32-68SF-T12-50 Toroidal Choke Coil(L4)
MDST-32-69SF-T10-40 Toroidal Choke Coil(L1)
MDST-32-70Switching Transformer(T1)
MDST-32-71SC02-15E Line Filter(L2)
MDST-32-72AC25V 2A 20mm ¢ 5.3 Miget Fuse(F1)
Page 23

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 24

© 1984 Nintendo of America Inc. Printed in Japan