CATHODE RAY TOMES

Emergency Call Ambulance (Rom Kit)

Emergency Call Ambulance (Export) (Sega, 1999) · Manual · 8 pages · 7 sections · original scan

Page 1

EMERGENCY CALL AMBULANCE

KIT VERSION (ROM SET) OWNER’S MANUAL

SEGA ENTERPRISES, INC. USA

Page 2

Warranty

Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating conditions. No other product in this machine is hereby covered.

Sellers sole liability in the event a warranted part described above fails shall be, at its option, to replace or repair the defective part during the warranty period. For Warranty claims, contact your Sega Distributor.

Should the Seller determine, by inspection that the product was caused by Accident, Misuse, Neglect, Alteration, Improper Repair, Installation or Testing, the warranty offered will be null and void.

Under no circumstances is the Seller responsible for any loss of profits, loss of use, or other damages.

This shall be the exclusive written Warranty of the original purchaser expressed in lieu of all other warranties expressed or implied. Under no circumstance shall it extend beyond the period of time listed above.

Page 3

ROM CHANGE INSTRUCTIONS (_— SEGA Service Department http://www.seuservice.com | 45133 Industrial Drive Phone: 415.701.6580 Fremont, Ca. 94538 Fax: 415.701.6594

EMERGENCY CALL AMBULANCE

Before starting work be sure to turn power off. Failure to observe this can cause electric shock and short circuit hazards. Use care so as not to damage wirings. Damaged wirings can cause electric shock or short circuit accidents. This work should be performed by the Locations Maintenance Man or Serviceman. Performing work by those who do not have technical expertise can cause electric shock accident, or damage to the Game Board

KIT INSTALLATION INSTRUCTIONS:

1.) Turn power off & Disconnect all plugs from the Game Board Cage.

2.) Remove Cage and open Case Lid.

3.) Remove (12) phillips screws and remove the PCB from Cage.

4.) Remove (4) phillips screws and nuts that secure Security Board to CPU Board. Remove Security Board.

5.) Install new Security Board and secure with the (4) philips screws previously removed; DO NOT OVER TIGHTEN!

6.) Remove each of the (41) E-Proms and Mask Roms from the Rom Board. Be careful not to scratch the Board or break sockets.

7.) Install new E-Proms and Mask Roms. Be careful not to damage IC by static electricity. Be careful not to bend pins while inserting E-Proms and Mask Roms.

8.) Re-install Game Board into cage, then replace cage into cabinet. Reconnect all connectors.

9.) Power On Game and test for proper operation. Set all game options.

Please see diagrams on the following page for E-PROM and ROM layout. If you have any questions please contact the SEGA Service Department at the numbers given above.

Page 4

[ CURRENT E-PROM AND MASK ROM LAYOUT ]* Your game board may differ from the one pictured below

(e)10)(e)(e)[e)

S5is-s0808 Ve (cz Gro,

7vee Pp EPR-20865SE
BaeF
1026 (VROMO1)1027 (VROMOO)11 (CROMO3)1C2 (CROMO2)
MPR-20870MPR-20871MPR-20845MPR-20846
128 (VROMO3)129 (VROMO2)13 (CROMO1)Ica (CROMOO)Sia72
MPR-20872MPR-20873MPR-20847MPR-20848ge go 52 ge
1C30 (VROMOS)131 (VROMO4)ICS (CROM13)1C& (CROM12)sv so aT St
MPR-20874MPR-20875MPR-20849MPR-208502 e ex ae z&
1¢32 (VROMO7)1¢33 (VROMO6)1¢7 (CROM11)1c (CROM10)Pujeules|es
MPR-20876MPR-20877MPR-20851?MPR-20852
1¢34 (VROMI1)1¢35 (VROM10)1c3_ (CROM23)1¢10 (CROM22)(@)
MPR-20878MPR-20879MPR-20853MPR-20854
1¢36 (VROM13)1¢37 (VROM1 2)1¢11 (CROM21)1¢12 (CROM20)elomlnla
MPR-20880MPR-20881MPR-20855MPR-20856seleelevles
°1¢38 (VROMT5)1¢33 (VROM14)OPrersicrosay1¢14 (CROM32)3Sj/8S 189 as
MPR-20882MPR-20883MPR-20857MPR-20858gu ge ey ou
140 (VROM1 7)141 (VROM16)115 (CROM31)116 (CROM30)esjeglselos
MPR-20884MPR-20885MPR-20859> MPR-20860-”-a-

SEGA

fo)fo)834-13428fe)

[ NEW EMERGENCY CALL AMBULANCE E-PROM AND MASK ROM LAYOUT ]

(e)10)°(e)[e)

F5i5-sos0a]

"|1C21 (SROMO)s
q= Sen 20886EI
éaeF
1026 (VROMO1)1027 (VROMOO)11 (CROMO3)1¢2 (CROMO2)
MPR- 22854MPR-22855MPR- 22870MPR- 22871
128 (VROMO3)129 (VROMO2)13 (CROMO1)Ic4 (CROMOO)_$|_8)_8|_3
MPR-22856MPR-22857MPR-22872MPR~- 22873gN Et] gn g8
1C30 (VROMOS)1C31 (VROMO4)15 (CROM13)16 (CROM12)oo eu ays
MPR-22858MPR-22859MPR- 22874MPR- 228752 ex ae x&
1¢52 (VROMO7)1¢33 (VROWO6)1¢7 (CROMI1)1CB_(CROM10)Pu jeu les ies
MPR-22860MPR- 22861MPR- 22876° MPR- 22877im
1034 (VROMT1)1¢35 (VROM10)N(@)

MPR-22862 MPR- 22863 1¢36 (VROM13) 1¢37 (VROMT 2)

MPR-22864MPR- 22865;32/28 [e822
o1C38 (VROM15)1€39 (VROM14)OPiersicrovssy1¢14 (CROMB2)oN 13N [3 aN
MPR-22866MPR- 22867MPR- 22882MPR- 22883Siiee ea oy
1C40 (VROM1 7)1C41 (VROM16)1015 (CROM31)116 (CROM30)elo eg eg
MPR- 22868MPR-22869MPR- 22884?MPR- 22885=--=

SEGA

  • fe) 834-13946-01] ©
Page 5

DESIGN RELATED PARTS

oppisite

PART NO.

DYN-0011 LOCAL PURCHASE 999-0842 999-0841 SPG-1201-E DYN-1214-C DYN-1214-D DYN-1214-E SPG-2002 999-0839 999-0840 999-0844 999-0843 999-0847 999-0846 999-0845 999-0837 999-0838 DESCRIPTION

DENOMI PLATE W/O ORIGINAL DENOMINATION SHEET 1 GAME, STICKER SEAT ADJ. ECA STICKER SUB INSTR SH ECA METER PANEL DESIGN PL TACO MTR TWIN DESIGN PL OIL MTR TWIN DESIGN PL WATER MTR TWIN STEERING EMBLEM STICKER MONITOR COVER L ECA STICKER MONITOR COVER R ECA STICKER MAIN BASE L ECA STICKER MAIN BASE R ECA STICKER SEAT REAR LOWER ECA STICKER SEAT REAR ECA MARQUEE PLEX ECA STICKER SEAT UPPER ECA LOWER MARQUEE ECA

  • Ttems that are marked with and asterick are not provided with this kit, but may be purchased through your SEGA. authorized parts dealer for your game.
Page 6

COMPOSITION OF GAME BOARD (game board not included)

to observe thisw may cause functioning not suitable for tyhe operation, or mal- Gror Ensure that the DIP SW setting is performed as designated as designated. Failure functioning.

IMPORTANT!

ASSY CASE EMERGENCY CALL AMBULANCE (998-0341)

Screw (16) W3X55, using flat & spring washers Screw (1 “TN M3X35, using flat & 1 ~ spring washers

No. | PART No. DESCRIPTION ® | 937-12715-91 | MODEL3 STEP2 CPU BOARD @ | 837-12716-91 MODEL3 STEP2 VIDEO BOARD 837~-13368 MODEL3 STEP2.1 VIDEO BD @® | 834-13946-01 ROM BD ECA @® | 837-11861-91 MODEL3 COMM BD COM

Page 7

VISIT OUR WEBSITE!

Netscape: SEU SERVICE HOMEPAGE vr @2@MAemuastec 2 £)GoTo: J [http://www seuservice.com/SEGASERVICE /mainpage html

MAILING LIST

SEGA DISTRIBUTORS

SERVICE STAFF

DARL'S OFFICE

HOME

[Y¥2K COMPLIANCE]

Sega Enterprises Inc.,USA Service Department Phone (650)-632-7580 Fax (650)-632-7594

Best Viewed with Ni

al what’s Related [What's new] [Manuals] [Bulletins] [Part Numbers][Game Monitors] [Board Systems] [Mailing List] [SEGA Distributors] [Service

Coin-Op Links:

Star Tech Journal

Amusement industry Mega Site

/f you have any questions about this Home Page please E-Mail to:

dari.davidson@seu.sega.com OR fhan.rockhili@seu.sega.com

A total of 3910 people have accessed this page.

THIS WES SITE POWERED BY

Page 8

SEGA

SEGA ENTERPRISES, INC. (USA)

45133 Industrial Drive Fremont, CA 94538 (415) 701-6580 phone (415) 701-6594 fax