ArmWrestling Operation Manual (CHV1-UP CHV-UP-US)
Arm Wrestling (Nintendo, 1985) · Manual · 36 pages · 13 sections · original scan
Arm rasta
This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rulés, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures may be required to correct the interference.
Use of non-Nintendo parts or modifications of your Nintendo game circuitry may adversely affect the safety of your game, and may cause injury to your players.
Contents
- Radio Frequency Interference © Location Setup --e cece cee cere e ete eects tee teste reeteetaeaes 1 A. Game Inspection 1 B. Game Installation 2
- Voltage Selection 3
- Power On/Off Switch -- 4
- Grounding of Game
- Adjustment of Video Monitor --
. Option Switch Settings -------.::. eee 7 A. Game Price Settings 8 B. Game Option Settings - 8
Selfatest and Bookkeeping) --- se -*-------- nnn n nnn res 9
. Maintenance and Repair --- A. Fuse Replacement —” B. Cleaning Cc Operation Panel -
D. Video Monitor Removal -+
Ee. Game PCB Removal
- Wiring and Connection --:-:::e:reesecrr errr
- Parts Lists A. CHV1-UP Game Cabinet Assembly CHV1-UP Operation Panel Assembly CHV1-UP Wiring Harnesses CHV1-CPU PCB Assembly (For 01 and 02 versions) 23—25 CHV1-VIDEO PCB Assembly(For 01 version): +-25—27 CHV1-VIDEO PCB Assembly(For 02 version): CHV1-BAK PCB Assembly -errreeesseerrreerereeree 054-FCC PCB Assembly ---+seereseeeeeees -- 30 PP-1000A Power Supply Assembly CHV1-UP Fuses c-TONMGOD
- Location Setup
A. Game Inspection
CHV Display Panel ————® (Name Plate)
CHP-US Front Screen
CHV-US Operation Pane
Cash Door
Video Monitor ———
Game PCB 054 Shield Cover =
Power Supply Assembly ————
Main Fuse Power On/Off Switch —
Power Cord
Game Serial Number Label
As \ “054 Shield Cage
\ \ \a Transformer
Game Overview
Check before plugging the game in!
The game“Arm Wrestling” is shipped ready for operation, but a last visual check should be made to insure the final touch of quality control. Please check the following to help us insure that your new game was delivered to you in good condition.
- Check the exterior of the game for shipping damage, dents, chips, or broken parts.
- Remove the screws on the Rear Door Panel.
- Unlock and open the Rear Door Panel, as well as the Service Door inspect the interior of the game as follows:
- Check that Plug-in connectors are firmly connected
- Check that Plug-in integrated circuits on the Game PCB are firmly connected in their sockets.
- Check that all major subassemblies such as the Power Supply, Operation Panel, and Video Monitor are properly mounted.
- Remove the tie-wrap that holds the coiled Power Cord on the inside cabinet wall. Check the cord for any cuts or dents
in the insulation.
B. Game Installation
Fig. 2 Installation Requirements
Power 170 watts Temperature 0 to 38deg.C (32 to 100 deg.F) Humidity : Not over 95% relative Space required 63 (W) x 90 (D)cm (24 3/4 x 35 1/2 in.) Height 189 cm (74 1/2 in.)
- Voltage Selection Before plugging in your game, make sure the Terminal Block of the Power Transformer is correct for your location’s line voltage.
Outlet through +—— lsolation
Transformer (For Upper Monitor Only)
AC 100V Terminal Block 100VA US. 90~120V Power Supply Assembly
MAX. Europe 200 ~240V
Power Supply Fuse tO)
3A 125V
Main Fuse U.S.: 5A 125V ( 90~120V) Europe : 3A 250V (200 ~ 240V)
Power Transfomer PT-1021A wa Outlet through Isolation Transformer AC 100V 120VA MAX.
ee Lower Monitor and or PT-1022B
Fluorescent Lamp
Power On/Off Switch
This game uses one of two types of transformers which are different in appearance but identical in function. The two types can be interchanged.
Fig. 3 Power Supply Assembly, Power Transformer and Voltage Selection
- Power On/Off Switch A Power On/Off Switch is located in the rear of the game at
the bottom center of the cabinet. See Fig. 1
If the results of the preceding steps are satisfactory, you are ready to plug the game in, and set the Power On/Off Switch to the “On” position.
This game MUST be grounded. Failure to do so may result in destruction of electronic components.
- Grounding of Game (Use only if 3 wire outlet is unavailable.) See Fig. 4
- A grounding wire should be connected to a grounding bar or a metal pipe which is firmly inserted into the ground.
- Do not connect the grounding to a water pipe, because polyvinyl-chloride pipes are sometimes used in water lines, and the electronic continuity to the ground may be interruppted
- Absolutely do not connect the grounding wire to a gas pipe, as this can be extremely dangerous.
Fig. 4 Grounding of Game
- Adjustment of Video Monitor
This game uses one of four types of Video Monitors which are different in appearance but identical in function.
The four types can be interchanged.
- Video Monitor : [32 Type] 20-EZV(R-C)
- Video Monitor : [33 Type] 20-EZV(R-C)
- Video Monitor : [85 Type] 20-Z2AW
To Video Monitor Main PCB From Game PCB Green Gain 6P—600 Video Red Gain Harness hs Blue Gai
* Signal PCB
INVERT OUT NON INVERT OUT
- H-HOLD
Fuse (Slow Blow) 4A, 125V. SF
IC 401
Video Monitor Main PCB DEGAUSS SWITCH ——
V-SIZE Fuse (Midget Type) 0.3A, 125V
V-HOLD This DEGAUSS SWITCH is
only attached to Video Monitor [33 Type] and 35 Type] H-CENT
BRIGHT
SOUND VOLUME
Fig. 5 Video Monitor : [32 Type] 20-EZV(R-C) [33 Type] 20-EZV(R-C) [35 Type] 20-Z2AW
Do not touch the inside of the Video Monitor. It contains many parts supplied with high voltage.
- Video Monitor : [Y51 Type] XM-2001N
V-LIN SUB BRIGHT Blue Gain
DEGAUSS SWITCH H-HOLD.
V-SIZE =
V-HOLD Green Gain’ Red Gain In case of CHV-UP, Set to “Negative” position !
a” ge Negative
rom 6P-600 Video Harness Positive
Per SN aoe Video Switch
H-CENT
BRIGHT [le
SOUND VOLUME
{ me
o_e eB
SPARE FUSE fraoa Ooo esoz [Je
| Fey oso:
Fuse (Slow Blow) 34, 128V—}—= Bir (~) i ow os O in}
Ole
lasypoe Fuse
Fig. 6
Video Monitor : [Y51 Type] XM-2001N
Do not touch the inside of the Video Monitor.
It contains many parts supplied with high voltage.
- Option Switch Settings
A pair of Option Toggle Switches are mounted on the Game PCB.
CHV1-CPU PCB
|! JK LMNOP Sw2
swi
ABCD
FHA a7 Option Toggle Switches
A. Game Price Settings Fig. 8 Game Price Settings
Toggle Settings Play/coin sw sw2 A B Cc D N 1/6 OEE OF ORE ON Onn US (Olle ON OFF (Slate ON AS OFF ORF ON ORF ORE 5/4 ON Or OFF OnE ON 3/4 ON OFF ON ON ON 1/4 ON ON Ola Chg OFF 5/3 OFF OFF OFF GEE ON 4/3 OFF ON ON ON ORF 2/3 ON OFF OFF ON OFF | 1/3 OFF OFF ON ON OFF 5/2 ON OFF ON ON OFF Bie. ON ON ORE ON (ClAls 1/2 ON OFF ORF OFF @EF V1 OFF OFE OFF (Cine ORF 27h OFF ON GER OFF OFF | 3/1 ON OFF ON ORF OFF 4/1 OFFus| ON ON OFF OFF 5/1 Obt ON OFF ON (Clg 6/1 ON ON ON (iE le OF.
Freeplay ON ON ON ON OSlr
B. Game Option Settings Fig. 9 Game Option Settings
Toggle (SW2) Settings 1{/s]k/]tl|™M o|P | Game Difficulty Easy (0) OFF | OFF
- [ON | OFF | (2) OFF | ON Hard (3) ON | ON 3 Rematches Allowed OFF 7 Rematches Allowed ON Self-Test/Game a Game (0) OFF Self-Test (1) ON
Self-Test and Bookkeeping
- Entry
There are two ways to enter Self-Test and Bookkeeping modes.
- While pressing the Service Switch, set the Power On/Off Switch to the “On” position. The hall of fame RAM is now possible to reset.
- Set for Self-Test Mode with Toggle P (SW2) on the Game PCB. And set the Power On/Off Switch to the “On” position.
- Self-Test and Bookkeeping are self-explanatory on the Video Monitor as follows.
RAM TEST
| Example | I | 8c | NG =———__—_—-Failed |
RAM location on the PCB (CPU PCB)
ROM TEST
| Example | 8L | OK =—_——_—Passed |
| ROM location | 8K | OK |
| on the PCB | Eu! | OK |
| (CPU PCB) | 8H | NG eee alled |
- Maintenance and Repair
A. Fuse Replacement This game contains 4 fuses. Replace fuses only with the same type as listed below.
Fig 10 Specification of Fuses [(1) Main Fuse US. : 5A 125V ( 90~120V) Europe : 3A 250V (200~ 240V) See Fig. 1 and 3
(2) Power Supply Fuse 8A 125V(Midget) ]
See Fig. 3
- Video Monitor Fuses
- [32 Type] 20-EZV(R-C) 4A 125V(Slow Blow)
- [33 Type] 20-EZV(R-C); 0.3A 125V(Midget)
- [35 Type] 20-Z2AW See Fig. 5
- [Y51 Type] XM-2001N 2.5A 125V(Slow Blow) 8A 125V(Slow Blow) See Fig. 6
Oo ning srior of the game, all metal parts and all plastic parts can with a nonabrasive cleanser. You should be careful ing the glass or plastic parts. A dry cloth may cause which will result in a foggy appearance
C. Operation Panel
- Operation Panel Removal Before repairing or replacing any switches or Complete A2PL Controller Ass’y. on the Operation Panel, unplug the game. Open the Service Door, which are reach througn the opening, and unlock the Clamps, located at each end on the underside of the Operation Panel. See Fig. 13.
- Micro-switch Replacement Whenever you replace any micro-switch on the Operation Panel, a switch gap adjustment is needed as shown in Fig. 11. Also, see Fig. 19. for layout of Control Panel Switches.
Press
Switch Button Assy.
\ \ Micro-switch Gap:0.2~0.5 mm (1/128 ~ 5/256 inch) a
Fig. 11 Switch gap adjustment
- Lubrication for Complete A2PL Controller Ass’y. To maintain the Complete A2PL Controller Ass’y. in good condition, lubricate the pillow balls and 2 way Guide Plate approx. every 3 months. See Fig. 12.
Fig. 12 Lubrication points
D. Video Monitor Removal
- Front Screen Removal First remove the Operation Panel and then pull the Front Screen toward you.
Aw, \t
Operation = Panel Ass’y.
Clamp
Service Door
Figaek3) Front Screen and Operation Panel Ass’y. Removal
- Video Monitor Removal If you need to remove the Video Monitor, follow the instructions listed below. But the following procedure should only be performed by an experienced service technician.
It is recommended the game be left unplugged for at least one hour before removing the Video Monitor. This will probably discharge the CRT, but extreme caution is still necessary.
) Make sure game is unplugged !! ) Open the Rear Door Panel and remove the Front Screen. ) Unplug all the harnesses and cables from the Video Monitor ) Standing at the front opening of the game, remove the four mounting bolts and flat washers. See Fig. 14.
- Carefully lift the Video Monitor and pull toward you
Use extreme caution and do not touch electrical parts of the yoke area with your hands or with any metal object in your hands.
Remove the four mounting bolts and flat washers
Fig. 14 Video Monitor Removal |
iS.
E. Game PCB Removal
- Make sure the game is unplugged !!
- Open the Rear Door Panel.
- Remove the 56-pin edge connector from the right side of the 054-FCC PCB on the 054 Shield Cover.
- Pull out 6 Fasteners located on perimeter of the 054 Shield Cover. See Fig. 15.
- Remove the Game PCB from the 054 Shield Cage by carefully sliding it straight out of the wooden PCB retainers.
- Pull out 2 Fasteners in the middle of the 054 Shield Cover. The Game PCB can now be removed. See Fig. 15.
Game PCB 054 Shield Cover
Fastener
054-FCOC PCB
rig, PS Game PCB Removal
A reversed connector will damage your PCB! If the connectors don't slip on easily, don’t force them!
5. Radio Frequency Interference (RF!)
In order to protect against the RFI radiated from this equipment, please comply with the following.
- Do not use non-Nintendo parts !
- Do not modify your game circuitry !
- Do not modify the wiring harness and connections !
- Connect this game only to a grounded 3-wire outlet ) After servicing the Game PCB, shut the 054 Shield Cover completely with the Fasteners. See Fig. 15. ( ( ( ( ©
Wiring and Connectio
Fagard S) Wiring and Connection
PL al PI
10P-70-140 Flat Cable
P2 P2
10P-70 - 140 Flat Cable
BAK PCB VIDEO PCB CPU PCB CHVI-BAK CHV1-VIDEO CHY1-CPU
P3 P3 P3
5OP-40 -45 Flat Cable
P. 4,
50P-40- 45 Flat Cable
GND
054-FCC PCB
3)
Power Transformer PT-1021A(90~120V) PT-10218(90~120V) PT-1022B (200~240V) <o- 2 7 1200r240V i Power Switch 4 Power Supply [Ow o
| PP - 1000A | ' | FUSE | 1 |
| Ny | cecteeayaals | Power Cord | |
| i | 200V-240V3A | | = (al |
4 1 ee
| e | le | oe | = | ||
| LI | |~| | s| | |& | Ie] | « |
ig a} 2
| UP 56P 054 Edge | ASE | stels| | SIS] = | |
| Connecting | 5 |ala]a) $4] | BiE}5] | aja) = | ae |
Harness Ney eee wt
(as TV Extension Power Cord UL
Fluorescent Lamp 10W 3P-1500 black. TV Extension Power Cord UL_black
Sroow
Zeon |:
| _ | o8ss | |i |
| iT | aba | a a i |
€ 5 1 & 1
3P =500 '
| Gane"? is | Video Monitor | ; |
ange p= orange ; crane a \
brown TH brown 1 \
| 4P- 600 | it | ‘ | |||
| WE Coin | oo oan? | ! | |||
| jarness | 2 | ' | |||
| ted | _pyyed | Coint | Audio | Harness! | | |
| brown} [brown | ud Mea. | s. a | ae | ||
| orange Fy | foranga, | 5) | Upper Video Monitor |
Yellow}2t3{ yettou}
| a | iS | 444 | L2 | white Th white, |
| terart | red | red | Speak | |
| MarK(R) means that | 212 | ae |
connector color is red. 2P - 860 4P - 800 Speaker Harness Service Switch black Harness (R) yellow ellow ane ~~ o [3[3] brown aa brown Switch Service
Shielding Wire AC IN 100v
Shielding Wirt
UP44Type 15P Operation Panel Harness
oo ae =)
COUNTER ATTACK
Frame GND
Video Monitor
brown 2P -400 Audio Harness
Lower Video Monitor
Speaker white =
2P-860 Speaker Harness
- Parts Lists
A. CHV1-UP Game Cabinet Assembly 3
A. CHV1-UP Game Cabinet Assembly : PARTS LIST Continued
ITEM PART No. DESCRIPTION
| 1 | CHPU-13-03 | Body (Wooden Game Cabinet) |
| a | TKGU-01-29 | Fluorescent Lamp Ass'’y. |
| S) | CHPU-11-19 | Name Plate Retainer Upper 598L |
| 4 | CHVU-12-12 | CHV Display Panel (Name Plate) |
| & | CHPU-11-11 | Name Plate Retainer Lower 598L |
| 6 | TPPU-20-00 | Video Monitor [82 Type] 20-EZV(R-C) |
Video Monitor [83 Type] 20-EZV(R-C) Video Monitor [85 Type] 20-Z2AW
| 6 | MDSU-33-01 | Video Monitor [Y51 Type] XM-2001N |
| 7 | CHPU-11-10 | Front Screen Retainer 598L |
| 8 | CHPU-13-01 | 054 Black Cardboard Bezel Upper |
| 9 | CHPU-13-02 | 054 Black Cardboard Bezel Lower |
| 10 | CHPU-12-13 | CHP-US Front Screen |
| al | CHVU-12-11 | CHV-US Operation Panel (Panel Only) |
| nf 22 | TKGU-01-49 | Speaker Grill (2 Required) |
| ts | TKGU-01-43 | Speaker (2 Required) |
| 14 | TKGU-01-31 | Operation Panel Clamp A (2 Required) |
| 15 | TMAU-11-20 | CS Plate 120W |
| 16 | TKGU-01-33 | Service Switch (with Button) |
| 17 | TKGU-01-11 | Game Counter |
| 18 | TMAU-14-17 | Service Door ADD-S2: Order By Currency |
| 19 | TMAU-14-18 | Coin Selector: Order By Currency |
| 20 | TMAU-34-17 | Lamp BA-9S 6.3V 0.15A |
| 21 | TMAU-34-16 | Lamp Socket BA-9S |
| 22 | TMAU-34-19 | Micro-switch ADD D2MC-5F 1 |
| 28, | TMAU-14-12 | Door Lock |
| 24 | TMAU-11-14 | Cam B31R (2 Required) |
| 25 | TMAU-14-11 | Cash Door ADD |
| 26 | TMAU-11-27 | Cash Box ADD |
A. CHV1-UP Game Cabinet Assembly
§>)
Rear View of Game Cabinet Fig.
A. CHV1-UP Game Cabinet Assembly : PARTS LIST ITEM PART No. DESCRIPTION
| 1 | TKGU-01-61 | Vent Grill (2 Required) |
| 2 | CHPU-13-15 | Rear Door Panel |
| 3 | TMAU-14-14 | Lock K6510 |
| 4 | TMAU-11-15 | Cam A |
| IS) | CHPU-11-18 | PCB Stopper (2 Required) |
| 6 | CHVU-22-01 | CHV1-VIDEO Complete PCB Assembly |
| a | CHVU-21-01 | CHV1-CPU Complete PCB Assembly |
| 8 | CHVU-24-01 | CHV1-BAK Complete PCB Assembly |
| 9 | CHPU-01-01-11 | 054 Shield Cover |
| 10 | CHPU-23-01 | 054-FCC Complete PCB Assembly |
| 11 | CHPU-11-17 | 054 Shield Spacer (2 Required) |
| 12 | CHPU-23-35 | Nylatch Fastener (8 Required) |
| 13 | CHPU-23-34 | Nylatch Grommet (8 Required) |
| 14 | CHPU-01-19 | PCB Support CBSS-12N (9 Required) |
| ls) | CHPU-01-20 | PCB Support CBSS-8N (5 Required) |
| 16 | TKGU-01-08 | Power Cord: Order By Voltage & Plug Type |
| We | CHPU-88-01 | PP-1000A Complete Power Supply Assembly |
| 18 | CHPU-08-01 | PT-1021A Power Transformer (For 90~120V) |
| 18 | CHPU-18-01 | PT-1021B Power Transformer (For 90~120V) |
| 18 | CHPU-18-02 | PT-1022B Power Transformer (For 200~240V) |
| 19 | TKGU-01-30 | Caster (2 Required) |
20 CHPU-01-01-10 054 Shield Cage
| 21 | TKGU-01-65 | Strain Relief Bushing Plate |
| 22 | TKGU-01-10 | Strain Relief Bushing |
B. CHV1-UP Operation Panel Assembly
id
13 vi 1 : Complete A2PL Controller ie = = 1
Fig 19 Operation Panel Assembly
B. CHV1-UP Operation Panel Assembly : PARTS LIST
ITEM PART No. DESCRIPTION
| 1 | CHVU-14-11 | Complete A2PL Controller Ass’y. |
| @ | TMAU-11-17 | 2 way Guide Plate |
| 3 | TKGU-23-23 | E Ring 4 |
| 4 | CHSU-11-12 | AS Switch Collar |
| ) | TKGU-23-22 | Lever Spring |
| 6 | TKGU-23-20 | Spring Stopper |
| Te | TKGU-23-13 | Micro-switch VL12L (Bent) (2 Required) |
| 8 | TKGU-23-17 | Switch Spacer (8 Required) |
| 9 | CHSU-11-11 | A5 Bearing Bracket |
| 10 | TMAU-12-15 | Lever Plate |
| 11 | TMAU-12-14 | Control Knob Plate 28D |
| 12 | CHVU-12-13 | Controller Knob Collar 23L |
| 13 | CHVU-11-11 | A5 Knob with Shaft 101.5L |
| 14 | TKGU-23-34 | Pal Nut |
| 13 | TKGU-23-26 | Nut Plate (2 Required) |
| 16 | TKGU-23-12 | Switch Button Bracket |
| 17 | TMAU-34-18 | Micro-switch VL12L (Straight) |
| 18 | TMAU-12-18 | Collar 3428 7H |
| 1S | TMAU-11-19 | Operation Panel Fastener B 38W (2 Required) |
| 20 | CHPU-12-17 | Black Sponge 210 590L |
| 21 | CHVU-12-11 | CHV-US Operation Panel |
| 22 | TKGU-23-32 | Orange Button Ass’y. |
| 23 | TKGU- 23-10 | Micro-switch VL105L2 |
| 24 | CHSU-11-15 | Pull switch Button |
| 25 | CHSU- 11-14 | Pull switch Button Bracket |
| 26 | CHSU-51-11 | Hexagon Socket Headless Set Screw |
| au | CHVU-12-14 | Rubber Guide Plate |
C. CHV1-UP Wiring Harnesses
PART No. CH TP TP PU-41-16 PU-93-02 PU-93-07 TMAU-41-12 CH PU-41-13 TMAU-41-14 TK CH CH CH GU-13-17 PU-41-14 PU-93-12 PU-93-11 CHVU-41-11 DESCRIPTION See Fig. 16
UP 56P 054 Edge Connecting Harness 2P-400 Audio Harness (400mm) (2 Required) 6P-600 Video Harness (600mm) (2 Required) 3P-500 Game Counter Harness (500mm) 4P-800 Service Switch Harness (800mm) 4P-600 WL Coin Harness (600mm) 2P Speaker Harness [2P-860] (860mm) (2 Required) UP 44 Type 15P Operation Panel Harness 50P- 40-45 Flat Cable (2 Required) 10P-70-140 Flat Cable (2 Required) 3P-1500 TV Extension Power Cord UL(2 Required)
Continued D. CHV1-CPU PCB Assembly (For 01 and O2 versions) : PARTS LIST
PART No. DESCRIPTION (Reference Designations and Locations) CHVU-21-01 CHV1-CPU Complete PCB Assembly
CHVU-21-11 Z80A Microprocessor (6H) CHVU-21-12 VLM5030 Speech Synthesizer (6M) CHVU-21-13 RP2A03 Microprocessor (4H)
CHVU-21-15 2764 8K-Byte EP-ROM 250ns CHV1-C-4K (4K) CHVU-21-16 2764 8K-Byte EP-ROM 300ns CHV1-C-8H (8H) CHVU-21-17 2764 8K-Byte EP-ROM 300ns CHV1-C-8J (8J) CHVU-21-18 2764 8K-Byte EP-ROM 300ns CHV1-C-8K (8K) CHVU-21-19 2764 8K-Byte EP-ROM 300ns CHV1-C-8L (8L) CHVU-21-20 27128 16K-Byte EP-ROM 300ns CHV1-C-6P (6P) CHVU-21-21 27128 16K-Byte EP-ROM 300ns CHV1-C-8F (8F) CHVU-21-22 HM6116AP-15 2K-Byte RAM 150ns (AL) CHVU-21-23 TC5533P-A 4K-Byte RAM 150ns (8D) CHVU-21-24 HM6264P-15 8K-Byte RAM 150ns (8C) CHVU-21-25 TC5514AP-3 1Kx4-Bit C-MOS RAM 300ns (8M)
CHVU-21-26 74LS00 Quad 2-Input NAND (3B) CHVU-21-27 74LS02 Quad 2-Input NOR (3A) CHVU-21-28 74LS04 Hex Inverters (4B, 3C, 6D, 6E) CHVU-21-29 74LS08 Quad 2-Input AND (5D) CHVU-21-30 74LS14 Hex Schmitt Inverters (1C) CHVU-21-31 74LS74A Dual “D” Flip-Flops (P, CL) (1D, 1F) CHVU-21-32 74LS92 Divide-By-Twelve Counter (5L) CHVU-21-33 74LS109A Dual J-K Flip-Flops (PLE, CL) (5F) CHVU-21-34 74LS138 3 To 8 Decoder (2C, 2D, 7D) CHVU-21-35 74LS139 Dual 2 To 4 Decoders (7E, 8A) CHVU-21-36 74LS161A 4-Bit Binary Counters (2A, 5A, 5B, 6B, 7B) CHVU-21-37 74LS194A 4-Bit Shift Registers (4A) CHVU-21-38 74LS240 Octal Bus Inverters (TS) (1R, 2R, 5R, 6R) CHVU-21-39 74LS245 Octal Bus Transceivers (TS) (7F) CHVU-21-40 74LS259 8-Bit Addressable Latches (2B) CHVU-21-41 74LS365 Hex Bus Drivers (5C, 6C, 7C) CHVU-21-42 74LS367 Hex Bus Drivers (6F, 6K, 7K) CHVU-21-43 74LS374 Octal “D” Flip-Flops (1A,6A, 7A, 2H, 2J, 6L) CHVU-21-44 74804 Hex Inverters (5K) CHVU-21-45 7437 Quad 2-Input NAND Buffers (5H) CHVU-21-46 75471 Dual Peripheral AND Drivers (38) CHVU-21-47 74HC20 Dual 4-Input NAND (8N) CHVU-21-48 PST518A Low Voltage Detector (Si) CHVU-21-49 LM324 Quad Operational Amplifiers (2N)
CHVU-21-50 2SC1815 Silicon NPN Transistor (Q1~Q3) CHVU-21-108 2SC2235 Silicon NPN Transistor (Q4)
CHVU-21-51 ES1F Diode (D1) CHVU-21-52 1S5277B Diode (D2, D3) CHVU-21-53 182076 Diode (D4~ D6)
Continued PART No. DESCRIPTION (Reference Designations and Locations) CHVU-21-54 DAN401 Quad Cathode-Common Diode Array (DA1, DA2, DA3, DA4)
| CHVU-21-55 | 330 pf 50V+5% Styrol Capacitor | (C36, C41) |
| CHVU-21-56 | 0.01 uf 50V+10% Mylar Capacitor | (C34, C39) |
| CHVU-21-57 | 0.015 uf 50V+10% Mylar Capacitor | (C35, C40) |
CHVU-21-109 68 pf 50V Ceramic-Disc Capacitor (C52) CHVU-21-120 100pf 50V Ceramic-Disc Capacitor (C10)
| CHVU-21-58 | 180 pf 50V Ceramic-Disc Capacitor | (C30) |
| CHVU-21-59 | 220 pf 50V Ceramic-Disc Capacitor | (C44, C45) |
CHVU-21-60 330 pf 50V Ceramic-Disc Capacitor (C2, C46, C47, C51)
| CHVU-21-61 | 1000 pf 50V Ceramic-Disc Capacitor | (C1) |
| CHVU-21-62 | 0.01 uf 50V Ceramic-Disc Capacitor | (C80 ~C150) |
| CHVU-21-63 | 0.068 uf 50V Ceramic-Disc Capacitor | (C7, C8, C9) |
CHVU-21-64 1 uf 16V Al Electrolytic Radial Cap. (C3,C4,C31,C32,C37,C42)
| CHVU-21-65 | 3.3 uf 16V Al Electrolytic Radial Cap. | (C5, C6) | |
| CHVU-21-66 | 10 uf 16V Al Electrolytic Radial Cap. | (C33, C38) | |
| CHVU-21-67 | 33 uf 16V Al Electrolytic Axial Cap. | (C43) | |
| CHVU-21-68 | 220 uf 16V Al Electrolytic Axial Cap. | (C50) | |
| CHVU-21-69 | 0 Ohm Shunt Lead | (R18, R19) | |
| CHVU-21-70 | 10 | Ohm 1/4W £5% Resistor | (R6) |
| CHVU-21-71 | oT | Ohm 1/4W £5% Resistor | (R14, R92) |
| CHVU-21-72 | 100 Ohm 1/4W+£5% Resistor | (R82,R33RS6, R37) | |
| CHVU-21-73 | 110 Ohm 1/4W +5% Resistor | (R3) | |
| CHVU-21-74 | 180 Ohm 1/4W+5% Resistor | (R61, R68) | |
| CHVU-21-75 | 330 Ohm 1/4W+5% Resistor | (R30, R31) | |
| CHVU-21-76 | 820 Ohm 1/4W+5% Resistor | (R1, R2, R64, R65) | |
| CHVU-21-77 | 1K | Ohm 1/4W+5% Resistor | —(R9,R62, R69, R80~R86, R88, R90) |
| CHVU-21-78 | 2.4K Ohm 1/4W+5% Resistor | (R49) | |
| CHVU-21-79 | 3.3K Ohm 1/4W+£5% Resistor | (R15, R16, R47) | |
| CHVU-21-80 | 5.1K Ohm 1/4W+£5% Resistor | (R4, R7, R8, R17, R87) | |
| CHVU-21-81 | 8.2K Ohm 1/4W +£5% Resistor | (R57) | |
| CHVU-21-82 | 10K Ohm 1/4W+5% Resistor | (R43, R51, R55) | |
| CHVU-21-83 | 12K Ohm 1/4W+5% Resistor | (R85, RSS. R52) | |
| CHVU-~21-85 | 20K Ohm 1/4W+£5% Resistor | (R5, R34, R38) | |
| CHVU-21-86 | 30K Ohm 1/4W+£5% Resistor | (R48) | |
| CHVU-21-87 | 43K Ohm 1/4W+5% Resistor | (R60, R67) | |
| CHVU-21-88 | 75K Ohm 1/4W+5% Resistor | (R44) | |
| CHVU-21-89 | 100K Ohm 1/4W +£5% Resistor | (R45, R46, R53, R54, R56) |
CHVU-21-110 110K Ohm 1/4W+5% Resistor (R59, R66)
| CHVU-21-90 | 150K Ohm 1/4W+5% Resistor | (R70, R71) |
| CHVU-21-91 | 200K Ohm 1/4W+5% Resistor | (R10~R13) |
| CHVU-21-92 | Hex 5.1K Ohm Series Resistor Array | (RMS) |
| CHVU-21-93 | Octal 1K Ohm Series Resistor Array | (RM1~RM4) |
| CHVU-21-94 | Quad 68 Ohm Parallel Resistor Array | (RM6~RM9) |
| CHVU-21-95 | 8 MHz Crystal | (X1) |
| CHVU-21-96 | 21.47727 MHz Crystal | (X2) |
PART No. DESCRIPTION(Reference Designations and Locations)
CHVU-21-97 CHVU-21-98 CHVU-21-111 CHVU-21-99 CHVU-21-100 CHVU-21-101 CHVU-21-102 CHVU-21-103 CHVU-21-104 CHVU-21-105 CHVU-21-106 CHVU-21-107 4-Station, Single-Throw, DIP Bit Switch (SW1) 8-Station, Single-Throw, DIP Bit Switch (SW2) 24 Pin DIP IC Socket ($13) 28 Pin DIP IC Socket (S4~S10) 40 Pin DIP IC Socket (S1~S3) 10 Pin Connector Receptacle (Pvee2) 50 Pin Flat Cable Header (P3, P4) Battery Case TYPE33-3 (UM-3x3) Flat Head Screw M2.6x8 Nut Plate M2.6-P30 (2 per assembly) Wire Tie T18L Dry Battery UM-3 ( “AA” Dry Cell) (3 per assembly)
There are different versions of the VIDEO P.C. Board.
When ordering parts, please give the part number and part name of each version parts list. CHV1-01-VIDEO : 01 version
CHV1-02-VIDEO : 02 version
E.CHV1-VIDEO PCB Assembly (For 01 version) : PARTS LIST Continued
PART No. DESCRIPTION (Reference Designations and Locations) CHVU-22-01 CHV1-VIDEO Complete PCB Assembly
CHVU-22-15 2764 8K-Byte EP-ROM 450ns CHV1-V-6N (6N) CHVU-22-16 2764 8K-Byte EP-ROM 450ns CHV1-V-8N (8N) CHVU-22-17 2764 8K-Byte EP-ROM 450ns CHV1-V-6P (6P) CHVU-22-18 2764 8K-Byte EP-ROM 450ns CHV1-V-8P (8P) CHVU-22-19 27128 16K-Byte EP-ROM 300ns CHV -V-2R (2R) CHVU-22-20 27128 16K-Byte EP-ROM 300ns CHV1-V-3R (3R) CHVU-22-21 27128 16K-Byte EP-ROM 300ns CHV1-V-4R (4R) CHVU-22-22 27128 16K-Byte EP-ROM 300ns CHV1-V-2T (2T) CHVU-22-23 27128 16K-Byte EP-ROM 300ns CHV1-V-3T (30) CHVU-22-24 27128 16K-Byte EP-ROM 300ns CHV1-V-4T (4T) CHVU-22-25 27128 16K-Byte EP-ROM 300ns CHV -V-2U (2U) CHVU-22-26 27128 16K-Byte EP-ROM 300ns CHV -V-3U (3U) CHVU-22-27 27128 16K-Byte EP-ROM 300ns CHV1-V-4U (4U) CHVU-22-28 27128 16K-Byte EP-ROM 300ns CHV1-V-2V (2V) CHVU-22-29 27128 16K-Byte EP-ROM 300ns CHV1-V-3V (3V) CHVU-22-30 N82S129N 256x4-Bit Bipolar ROM CHV1-V-2D (2D) CHVU-22-31 HM6116ASP-15 2K-Byte RAM 150ns (8H, 2N)
(2s)
Continued
PART No. DESCRIPTION (Reference Designations and Locations)
| CHVU-21-26 | 74LS00 Quad 2-Input NAND | (1E, 6S, 5L) |
CHVU-21-28 74LS04 Hex Inverters (6C, 4D, 4E, 6E, 1u, 6T)
| CHVU-22-32 | 74LS10 Triple 3-Input NAND | (6U) |
| CHVU-22-33 | 74LS11 Triple 3-Input AND | (8D, 6V) |
| CHVU-22-34 | 74LS20 Dual 4-Input NAND | (7V) |
| CHVU-22-35 | 74LS21 Dual 4-Input AND | (1K) |
CHVU-21-31 74LS74A Dual “D” Flip-Flops (P, CL) (3D, 6R, 7S, 7T, 7U)
| CHVU-22-36 | 74LS86 Quad 2-Input Exclusive OR | (70, 1A, SP. LS) |
| CHVU-21-34 | 74LS138 3 To 8 Decoder | (SIE SIE HE) |
| CHVU-21-35 | 74LS139 Dual 2 To 4 Decoders | (5F, 6J) |
| CHVU-22-37 | 74LS151 8 To 1 Data Selector | CU, 1W, 4W) |
| CHVU-22-38 | 74LS153 Dual 4 To 1 Data Selectors | (5C, 5D) |
| CHVU-22-39 | 74LS157 Quad 2 To 1 Data Selectors | (4P, 7F, 8F, 6H, 4N, 5N) |
CHVU-22-40 74LS158 Quad 2 To 1 Data Selectors ) CHVU-21-36 74LS161A 4-Bit Binary Counters (2A, 7C, 8C, 6D, 2E 3E, 7E, 8E, 6F, 3M, 4M, 5M, 8T, 8U)
| CHVU-22-41 | 74LS164 8-Bit Shift Registers | (5J, SK, 2L,2M) |
| CHVU-22-42 | 74LS174 Hex “D” Flip-Flops | (3L, 4L) |
| CHVU-22-43 | 74LS175 Quad “D” Flip-Flops (CL) | (2C) |
| CHVU-22-44 | 74LS244 Octal Buffers & Line Drivers (TS) | (3N} SP, SE) |
| CHVU-22-45 | 74LS273 Octal “D” Flip-Flops (CL) | (A, 8d4I Neale 2P) |
| CHVU-22-46 | 74LS283 4-Bit Full Adder | (2K, 3K, 4K) |
| CHVU-22-47 | 74LS299 8-Bit Shift/Storage Registers | (8R, 8S) |
| CHVU-21-42 | 74LS367 Hex Bus Drivers | (2B, 5W) |
CHVU-22-48 74LS373 Octal “D” Transparent Latches(3A, 3B, 7B, 8B, 3C)
| CHVU-21-43 | 74LS374 Octal “D” Flip-Flops | (8V) |
| CHVU-22-49 | 74LS375 4-Bit Bistable Latches | (4A, 5A, 4B, 6B, 4C) |
| CHVU-22-50 | 74LS377 Octal “D” Flip-Flops | (7J, 1T, 1V, 4V) |
| CHVU-21-44 | 74S04 Hex Inverters | (1B) |
| CHVU-22-51 | 74F04 Hex Inverters | (1C) |
| CHVU-22-52 | 74F74 Dual “D” Flip-Flops (P, CL) | (1D, 4H) |
| CHVU-22-53 | 74F161 4-Bit Binary Counters | GE, 2a 3k, 4) |
CHNU- 22-54%" 74174 Hex “D” Flip=Flops (2H, 3H)
| CHVU-22-55 | 74F283 4-Bit Full Adder | (2J, 3J, 4J) |
| CHVU-21-51 | ES1F Diode | (D1) |
CHVU-21-120 100 pf 50V Ceramic-Disc Capacitor (C10,C11,012,C13,C141)
| CHVU-21-58 | 180 pf 50V Ceramic-Disc Capacitor | (C1) |
CHVU-21-60 330 pf 50V Ceramic-Disc Capacitor (C2,C3,C4,C15,017,C140)
| CHVU-21-62 | 0.01 uf 50V Ceramic-Disc Capacitor | (C20~C138) |
| CHVU-21-68 | 220 uf 16V Al Electrolytic Axial Cap. | (C5) |
PART No. DESCRIPTION (Reference Designations and Locations)
| CHVU-21-75 | 330 Ohm 1/4W +5% Resistor | (R1, R2) |
CHVU-21-77. 1K Ohm 1/4W +5% Resistor (R20~R31)
| CHVU-21-79 | 3.3K Ohm 1/4W +5% Resistor | (R38, R4) |
| CHVU-21-93 | Octal 1K Ohm Series Resistor Array | (RM1) |
| CHVU-22-57 | 20.160MHz Crystal | (X41) |
| CHVU-22-58 | 16 Pin DIP IC Socket | ($21) |
CHVU-21-99 28 Pin DIP IC Socket (S1~S11, $S138~S820) CHVU-21-101 10 Pin Connector Receptacle (1 2) CHVU-21-102 50 Pin Flat Cable Header (P3, P4)
F. CHV1-VIDEO PCB Assembly (For O2 version) : PARTS LIST Continued
PART No. DESCRIPTION (Reference Designations and Locations) CHVU-22-01 CHV1-VIDEO Complete PCB Assembly
| CHVU- 22-59 | 2564 8K-Byte EP-ROM 450ns CHV1-V-6N | (6N) |
| CHVU-22-60 | 2564 8K-Byte EP-ROM 450ns CHV1-V-8N | (8N) |
| CHVU-22-61 | 2564 8K-Byte EP-ROM 450ns CHV1-V-6P | (6P) |
| CHVU-22-62 | 2564 8K-Byte EP-ROM 450ns CHV1-V-8P | (8P) |
| CHVU-22-19 | 27128 16K-Byte EP-ROM 300ns CHV1-V-2R | (2R) |
| CHVU-22-20 | 27128 16K-Byte EP-ROM 300ns CHV1-V-3R | (3R) |
| CHVU-22-21 | 27128 16K-Byte EP-ROM 300ns CHV1-V-4R | (4R) |
| CHVU-22-22 | 27128 16K-Byte EP-ROM 300ns CHV1-V-2T | (2T) |
| CHVU-22-23 | 27128 16K-Byte EP-ROM 300ns CHV1-V-3T | (S19) |
| CHVU-22-24 | 27128 16K-Byte EP-ROM 300ns CHV1-V-4T | (4T) |
| CHVU-22-25 | 27128 16K-Byte EP-ROM 300ns CHV1-V-2U | (2U) |
| CHVU-22-26 | 27128 16K-Byte EP-ROM 300ns CHV1-V-3U | (3U) |
| CHVU-22-27 | 27128 16K-Byte EP-ROM 300ns CHV1-V-4U | (4U) |
| CHVU-22-28 | 27128 16K-Byte EP-ROM 300ns CHV1-V-2V | (2V) |
| CHVU-22-29 | 27128 16K-Byte EP-ROM 300ns CHV1-V-3V | (3V) |
| CHVU-22-30 | N82S129N 256x4-Bit Bipolar ROM CHV1-V-2D | (2D) |
| CHVU-22-31 | HM6116ASP-15 2K-Byte RAM 150ns | (8H, 2N) |
CHVU-21-26 74LS00 Quad 2-Input NAND (1E, 6S, 5L) CHVU-21-28 74LS04 Hex Inverters (6C, 4D, 4E, 6E, 1J, 6T)
| CHVU-22-32 | 74LS10 Triple 3-Input NAND | (6U) |
| CHVU-22-33 | 74LS11 Triple 3-Input AND | (8D, 6V) |
| CHVU-22-34 | 74LS20 Dual 4-Input NAND | (7V) |
| CHVU-22-35 | 74LS21 Dual 4-Input AND | (1K) |
CHVU-21-31 74LS74A Dual “D” Flip-Flops (P, CL) (3D, 6R, 7S, 7T, 7U)
ea
PART No. DESCRIPTION (Reference Designations and Locations)
| CHVU-22-36 | 74LS86 Quad 2-Input Exclusive OR | (7D, Thy SRe is) |
| CHVU-21-34 | 74LS138 3 To 8 Decoder | (Gis; Sle, 1/59) |
| CHVU-21-35 | 74LS139 Dual 2 To 4 Decoders | (5F, 6J) |
| CHVU-22-37 | 74LS151 8 To 1 Data Selector | (QU, is 4W) |
| CHVU-22-38 | 74LS153 Dual 4 To 1 Data Selectors | (5Ga5) |
CHVU-22-39 74LS157 Quad 2 To 1 Data Selectors (4P, 7F, 8F, 6H, 4N, 5N, 7R) CHVU-21-36 74LS161A 4-Bit Binary Counters (2A, 7C, 8C, 6D, 2E, 3E, 7E, 8E, 6F, 3M, 4M, 5M, 8T, 8U)
| CHVU-22-41 | 74LS164 8-Bit Shift Registers | (5J, 5K, 2L,2M) |
| CHVU-22-42 | 74LS174 Hex “D” Flip-Flops | (3L, 4L) |
| CHVU-22-43 | 74LS175 Quad “D” Flip-Flops (CL) | (2C) |
| CHVU-22-44 | 74LS244 Octal Buffers & Line Drivers (TS) | (NESEY ola) |
| CHVU-22-45 | 74LS273 Octal “D” Flip-Flops (CL) | GinimGrlwiN, 1B x2e) |
| CHVU-22-46 | 74LS283 4-Bit Full Adder | (2K, 3K, 4K) |
| CHVU-22-47 | 74LS299 8-Bit Shift/Storage Registers | (8R, 8S) |
| CHVU-21-42 | 74LS367 Hex Bus Drivers | (2B, 5W) |
CHVU-22-48 74LS373 Octal “D” Transparent Latches(3A, 3B, 7B, 8B, 3C)
| CHVU-21-43 | 74LS374 Octal “D” Flip-Flops | (8V) |
| CHVU-22-49 | 74LS375 4-Bit Bistable Latches | (4A, 5A, 4B, 6B, 4C) |
| CHVU-22-50 | 74LS377 Octal “D” Flip-Flops | (7J, 1T, 1V, 4V) |
| CHVU-21-44 | 745804 Hex Inverters | (1B) |
| CHVU-22-51 | 74F04 Hex Inverters | (1C) |
74F74 Dual “D” Flip-Flops (P, CL) (1D, 4H) 74F161 4-Bit Binary Counters (tie, 2 oe the)
| CHV | 74F174 Hex “D” Flip-Flops | (2H, 3H) |
| CHVU-22- 55 | 74F283 4-Bit Full Adder | of 3u, 4J) |
| CHVU-21-51 | ES1F Diode | (D1) |
CHVU-21-120 100 pf 50V Ceramic-Disc Capacitor (C10,C11,C12,C13,0141)
| CHVU-21-58 | 180 pf 50V Ceramic-Disc Capacitor | (a |
CHVU-21-60 330 pf 50V Ceramic-Disc Capacitor (C2,C3,C4,C15,C17,C140)
| CHVU-21-62 | 0.01 uf 50V Ceramic-Disc Capacitor | (C20-~C138) |
| CHVU-21-68 | 220 uf 16V Al Electrolytic Axial Cap. | (C5) |
| CHVU-21-75 | 330 Ohm 1/4W +£5% Resistor | (R1, R2) |
| CHVU-21-77 | 1K Ohm 1/4W 45% Resistor | ee ne |
| CHVU-21-79 | 3.3K Ohm 1/4W +5% Resistor | (R3, R4) |
| CHVvuU-21-93 | Octal 1K Ohm Series Resistor Array | (RM1) |
CHVU-22-57 = 20.160MHz Crystal (X1)
| CHVU-22-58 | 16 Pin DIP IC Socket | (S21) |
| CHVU-21-99 | 28 Pin DIP IC Socket | (S1~S11, S13~S20) |
CHVU-21-101 10 Pin Connector Receptacle (P1, P2) CHVU-21-102 50 Pin Flat Cable Header (P3, P4)
G. CHV1-BAK PCB Assembly : PARTS LIST Continued
PART No. DESCRIPTION (Reference Designation and Locations) CHVU-24-01 CHV1-BAK Complete PCB Assembly
| CHVU-24-11 | 2764 8K-Byte EP-ROM 300ns CHV1-B-2K | (2K) |
| CHVU-24-12 | 27128 16K-Byte EP-ROM 300ns CHV1-B-2D | (2D) |
| CHVU-24-13 | 27128 16K-Byte EP-ROM 300ns CHV1-B-2E | (2E) |
| CHVU-24-14 | 27128 16K-Byte EP-ROM 300ns CHV1-B-2L | (2L) |
| CHVU-24-15 | 27128 16K-Byte EP-ROM 300ns CHV1-B-2M | (2M) |
| CHVU-24-16 | N82S131N 512x4-Bit Bipolar ROM CHV1-B-4B | (4B) |
| CHVU-24-17 | N82S131N 512x4-Bit Bipolar ROM CHV1-B-4C | (4C) |
| CHVU-24-18 | N82S131N 512x4-Bit Bipolar ROM CHV1-B-4D | (4D) |
| CHVU-24-19 | N82S131N 512x4-Bit Bipolar ROM CHV1-B-7B | (7B) |
| CHVU-24-20 | N82S131N 512x4-Bit Bipolar ROM CHV1-B-7C | (7C) |
| CHVU-24-21 | N82S131N 512x4-Bit Bipolar ROM CHV1-B-7D | (7D) |
| CHVU-24-22 | N82S129N 256x4-Bit Bipolar ROM CHV1-B-3C | (3C) |
| CHVU-22-31 | HM6116ASP-15 2K-Byte RAM 150ns | (Se ol, oe) |
| CHVU-21-26 | 74LS00 Quad 2-Input NAND | (4H, 4K) |
| CHVU-21-28 | 74LS04 Hex Inverters | (4J, 4L, 4M) |
| CHVU-22-38 | 74LS153 Dual 4 To 1 Data Selectors | (1A,2A,2B,3B,6H,6L) |
| CHVU-22-39 | 74LS157 Quad 2 To 1 Data Selectors | (1B,1H,1J,2U,3A,4A) |
CHVU-21-36 74LS161A 4-Bit Binary Counters (4F,6F,5M,6M)
| CHVU-22-42 | 74LS174 Hex “D” Flip-Flops | (2H) |
| CHVU-22-44 | 74LS244 Octal Buffers & Line Drivers (TS) | (3H,3J,3K) |
CHVU-24-23 74LS257 Quad 2 To 1 Data Selectors(TS)(7F,7H,7J,7K,7L,7M)
| CHVU-22-45 | 74LS273 Octal “D” Flip-Flops (CL) | (1N) |
CHVU-22-47 74LS299 8-Bit Shift/Storage Registers (1C,1F,1K,1L,1M,2C,2F)
| CHVU-21-42 | 74LS367 Hex Bus Drivers | (4N, 5d, 6U, 5K, 6K) |
CHVU-22-50 74LS377 Octal “D” Flip-Flops (1D, 1E, 3D, 3E, 3F, 3L, 3M)
CHVU-21-50 2SC1815 Silicon NPN Transistor (Q1, Q3, Q5, Q7, Q8, Q10, Q12, Q14) CHVU-24-24 2SA1015 Silicon PNP Transistor (Q2,Q4,Q6,Q9,Q11,Q13)
| CHVU-21-51 | ES1F Diode | (D1) |
CHVU-21-120 100 pf 50V Ceramic-Disc Capacitor (C6, C7)
| CHVU-21-59 | 220 pf 50V Ceramic-Disc Capacitor | (C5) |
| CHVU-21-62 | 0.01 uf 50V Ceramic-Disc Capacitor | (C20~C97) |
| CHVU-21-67 | 33 uf 16V Al Electrolytic Axial Cap. | (C2~C4) |
| CHVU-21-68 | 220 uf 16V Al Electrolytic Axial Cap. | (C1) |
PART No. DESCRIPTION (Reference Designations and Locations)
CHVU-21-71
VU-21-72
VU-24-25 VU-21-75 Gey 19)
I
HVU-24-26
VU-21-77
VU-24-27
HVU-24-28 HVU-21-93 Hor @ eo
ag
CHVU-22-58 CHVU-21-99 CHVU-21-101 CHVU-21-102 51 Ohm 1/4W +5% Resistor (R4, R8, R12, R17, R44, R48, R52, R55) 100 Ohm 1/4W +5% Resistor (R1, R5, RY, R15, R41, R45, R49, R53) 240 Ohm 1/4W +5% Resistor (R23,R28,R33,R63,R68,R73) 330 Ohm 1/4W +5% Resistor (R2,R3,R6,R7,R10,R11,R16,R42,R43,R46,R47,R50,R51,R54) 470 Ohm 1/4W +5% Resistor (R22,R24,R27,R29,R32,R34,R62,R64,R67,R69,R72,R74) 1K Ohm 1/4W +5% Resistor (R21, R26, R31, R61, R66, R71, R80~R89) 2K Ohm 1/4W +5% Resistor (R13, R20, R25, R30, R60, R65, R70) 7.5K Ohm 1/4W +5% Resistor (R14) Octal 1K Ohm Series Resistor Array (RM1)
16 Pin DIP IC Socket (S6~S11) 28 Pin DIP IC Socket (S1~S$5) 10 Pin Connector Receptacle (Pil, P)) 50 Pin Flat Cable Header (P3, P4)
% O54-FCC PCB Assembly : PARTS LIST
CHPU-23-01
CHPU-23-11 CHPU-23-12 CHPU-23-13 DESCRIPTION (Reference Designations) 054-FCC Complete PCB Assembly
252-28-50-168 56P Edge Connector 330 pf 50V Ceramic-Disc Capacitor (C1~C30) Ferrite Beads BL O2RN2-R62 (FC1~FC30)
|. PP-|1O00A Power Supply Assembly : PARTS LIST Continued
PART No. DESCRIPTION (Reterence Designations) CHPU-88-01 PP-1000A Complete Power Supply Assembly CHPU-88-02 3D-0163 Complete Power Supply PCB Assembly
| CHPU-88-11 | 3D-3000 Hybrid IC | (IC1) |
| CHPU-88-12 | uPC78M24 3-Terminal Regulator | (IC2) |
| CHPU-88-13 | TL431CLP Adjustable Shunt Regulator | (IC3) |
| CHPU-88-14 | TLP541G Photo Coupler | (PC1) |
| CHPU-88-15 | PC614 Photo Coupler | ise |
| CHPU-88-16 | RB404/S4VB40 Diode | (D1) |
| CHPU-88-17 | C25P04Q/20CS04M Diode | (D12) |
| CHPU-88-18 | 30DF2 Diode | (D11) |
| CHPU-88-19 | 1S81835/10DF6 Diode | (D6, D7, D10, D14) |
| CHPU-88-20 | 158954 Diode | (D3) |
| CHPU-88-21 | RD5. 1EB3 Zener Diode | = |
| CHPU-88-22 | 5P2M Thyristor | (Q1) |
| CHPU-88-23 | 2SC2562 Silicon NPN Transistor | (Q2) |
| CHPU-88-24 | 2SC2749 Silicon NPN Transistor | (Q3) |
| CHPU-88-25 | 0.01 uf 50V Mylar Capacitor | (C6, C9, C27) |
| CHPU-88-26 | 0.1 uf 50V Mylar Capacitor | (C13) |
| CHPU-88-27 | 1000 pf 50V Mylar Capacitor | (C12) |
| CHPU-88-28 | 0.047 uf 630V Metallized Film Cap. | (C1, C4) |
| CHPU-88-29 | 0.22 uf 250V Metallized Film Cap. | (C10, C28, C29) |
CHPU-88-30 2200 pf 2KV Ceramic-Disc Capacitor (C2,C3,C11,C15,C18)
| CHPU-88-31 | 4.7 uf 50V Al Electrolytic Cap. | (C7) |
| CHPU-88-32 | 47 uf 35V Al Electrolytic Cap. | (C8, C17) |
| CHPU-88-33 | 330 uf 200V Al Electrolytic Cap. | (C5) |
| CHPU-88-34 | 1000 uf 50V Al Electrolytic Cap. | (C16) |
| CHPU-88-35 | 3300 uf 10V Al Electrolytic Cap. | (C19~C26) |
CHPU-88-36 100 Ohm 1/4W +5% Carbon Resistor (R9,R11,R12,R23,R24)
| CHPU-88-37 | 1K | Ohm 1/4W +5% Carbon Resistor | (R4, R6, R15) |
| CHPU-88-38 | 1.5K Ohm 1/4W +5% Carbon Resistor | (R25) | |
| CHPU-88-39 | 2.4K Ohm 1/4W +5% Carbon Resistor | (R26) | |
| CHPU-88-40 | 10K Ohm 1/4W +5% Carbon Resistor | (R7) | |
| CHPU-88-41 | 24K Ohm 1/4W +5% Carbon Resistor | (R17) | |
| CHPU-88-42 | 30K Ohm 1/4W +5% Carbon Resistor | (R8) | |
| CHPU-88-43 | 5.1. | Ohm 1/2W +5% Carbon Resistor | (RISPR21) |
| CHPU-88-44 | 100 Ohm 1/2W +5% Carbon Resistor | (R5) | |
| CHPU-88-45 | 100K Ohm 1/2W +5% Carbon Resistor | (Rey cola | |
| CHPU-88-46 | 5.1 | Ohm SW +5% Cement Resistor | (R1) |
| CHPU-88-47 | 20 | Ohm 5W +5% Cement Resistor | (R22) |
| CHPU-88-48 | 30 | Ohm 5W +5% Cement Resistor | (R10) |
| CHPU-88-49 | 100 Ohm 5W +5% Cement Resistor | (R16) | |
| CHPU-88-50 | 510 Ohm 5W +5% Cement Resistor | (R20) | |
| CHPU-88-51 | 2K | Ohm Vertical Cermet Trimpot | (VR2) |
| CHPU-88-52 | 50K Ohm Vertical Cermet Trimpot | (VR1) | |
| CHPU-88-53 | _El-40 Type 3D-0163 Switching Transformer | (TR) |
PART No. DESCRIPTION (Reference Designations) CHPU-88-54 SC2A Choke Coil (L1) CHPU-88-55 SF-C27-00105-01 Choke Coil (L2) CHPU-88-56 3A FGMB NR Type Fuse
| CHPU-88-57 | OG751-0062 Fuse Holder | (2 per assembly) |
| CHPU-88-58 | Heat Sink Clip | (3 per assembly) |
CHPU-88-59 Thermally Conductive Rubber CHPU-88-60 2-Pin AC Input Connector Receptacle on PCB CHPU-88-61 6-Pin DC Output Connector Receptacle on PCB CHPU-88-62 7-Pin DC Output Connector Receptacle on PCB CHPU-88-65 3D-0163-32 Type Heat Sink
CHPU-88-63 3D-0163-30 Type Metal Frame CHPU-88-64 3D-0163-31 Type Metal Cover CHPU-88-66 3-Pin AC Input Connector Ass’y. on Metal Frame CHPU-88-67 9-Pin DC Output Connector Ass’y.on Metal Frame CHPU-88-68 12-Pin DC Output Connector Ass’y. on Metal Frame
| CHPU-88-69 | Metal PCB Retainer | (4 per assembly) |
J; CHV1-UP Fuses
PART No. DESCRIPTION(Reference Designations)
| TKGU-11-08 | Main Fuse U.S. | Mime | A 125V |
| CHVU-63-11 | Main Fuse Europe | 3A 250V | |
| CHPU-88-56 | Power Supply Fuse | 8A 125V(Midget) |
TKGU-11-12 Video Monitor Fuse
| 20-EZV(R-C), 20-Z2AW | 4A 125V(Slow Blow) | (F302) |
TKGU-11-13 Video Monitor Fuse
| 20-EZV(R-C), 20-Z2AW | 0.3A 125V(Midget) | (F301) |
MDST-63-12 Video Monitor Fuse
| XM-2001N | 2.5A 125V(Slow Blow) | (F702) |
MDST-63-13 Video Monitor Fuse
| XM-2001N | 3A 125V(Slow Blow) | (F701) |
©1985 Nintendo of America Inc. Printed in Japan