CATHODE RAY TOMES

PC10 Header Instructions

PC10 Header Instructions · Document · 1 pages · original scan

Page 1

Install NEW headers as shown on top of cabinet

Up to G headers can be used

Game PCS Removal and ROM PCS Exchange

  • Make sure the Power On/Off Switch is “On” pesition!
  • Open the Sack Door.
  • Before removing Game PC8 or exchanging ROM PC38, disunarge your static electricity by touching Shield Cage with. your hanc. (¢) Remove the 56-pin edge connector irem the right side cf the 054-=CC PCB on the 079 Shieid Cover Ass'y.
  • Pull out 6 Fasteners located on perimeter, of the G79 Shield ‘Cover. See Fig. 15. :
  • Remove the Game PCB from the Shield Cage Sy carefully sliding it straignt out of the wooden slots in the Shield Cage.

, | Note : Lay PC3 | O | flat on table i with O72 Shield Lei WK | Off table as | SK E | shown. O7S Shieid Cover

Cover hanging |