Asteroids Deluxe Caberat TM-173 1st Printing
Asteroids Deluxe (rev 3) (Atari, 1980) · Technical Manual · 56 pages · 47 sections · original scan
CABAR ET” Operation, Mainter and Service wan
- 38 S28 \aa \ 1
GAME SERIAL # IDENTIFICATION TAG
MONITOR
REGULATORI/AUDIO! PCB
ASTEROIDS DELUXE GAME PCB
GAME SERIAL NUMBER LOCATION Your game’s serial number is stamped on a plate on the outside of the game. The same number is also stamped on the chassis of the monitor, ce Regulator/Audio | PCB, and the Asteroids Deluxe™ Game PCB. Please men- @ tion this number whenever calling your distributor for service.
Operation, Maintenance and Service Manual
Complete with Illustrated Parts Lists A ATARI © 4 warner Communications Company
Copyright © 1981 by Atari, Inc. All rights reserved.
No part of this publication may be reproduced by any mechanical, photographic, or electronic process, or in the form of a phonographic recording, nor may it be stored in a retrieval system, transmitted, or otherwise copied for public or private use, without permission from the publisher.
Published by: ATARI, INC. 1265 Borregas Avenue P. O. Box 427 Sunnyvale, California 94086
Lithographed in the U.S.A. 3K
WEST and CENTRAL U.S.A. Parts for all Atari customers in the U.S.A. Game sales and service
Atari, Inc. California Customer Service Office 1105 N. Fair Oaks Avenue P. O. Box 427, Sunnyvale, CA 94086 Telex 17-1103 (Monday-Friday, 7:30-4:00 pm Pacific Time) s From California, Alaska or Hawaii (408) 745-2900 =: From anywhere else in this area toll-free (800) 538-1611
EAST U.S.A. Game sales and service only
Atari, Inc. New Jersey Customer Service Office Cottontail Lane, Somerset, NJ 08873 Telex 37-9347 (Monday-Friday, 7:30-4:00 pm Eastern time) From New Jersey 2 (201) 469-5993
s From anywhere else in this area toll-free (800) 526-3849
EUROPE Paris for all Atari customers in Wester Europe. Game sales and service
Atari Ireland Limited European Customer Service Office TIPPERARY TOWN, Tipperary Town, Ireland IRELAND Telex 8165 (Monday-Friday, 9:00-6:00 pm GMT)
@S 06252155
Asteroids Deluxe MiCabaret
Table of Contents
Location Setup A. 1 B. Game Inspection . 3 C. Game Installation. 3
- Voltage Selection’.............. 3
- Interlock and Power On/Off Switches . 4 D. Self-Test Procedure ..............- 6 E. Option Switch Settings .... 9
- Bonus Play Feature..... . 9
- Coin Mechanism Multipliers . - 10
- Examples of Game Price Settings . . 10 F. GamePlay 0.2.0... 0... cece eee tee tenes 13
- Attract Mode 0... cece eee ete eee ene 13
- Ready-to-Play Mode . . 14
- PlayMode ......... 14
- High Score Initial Mode ........0. 00. e eee eee eee 14
Maintenance and Repair A. Cleaning ...... 0.6 c cece een nee eee eee B. Fuse Replacement..... C. Opening the Control Panel .
- Leaf-Switch Replacement............ 0... c cece eee ee eee es
- LED Start-Switch Replacement ...........--0. 00sec eee eee Monitor Removal ..........-.. Printed-Circuit Board Rernoval Fluorescent Tube Replacement .... Game Operation. 0.0... eee tne Qommo
Itlustrated Parts Lists Illustrations and parts lists begin on page ........-.-.. ce. eee eee 26
Asteroids Deluxe Cabaret
List of Illustrations
Figure 1 Overview of Game 2 Figure 2 Installation Requirements .. 3 Figure 3 International Line Voltage Selection . 4 Figure 4 Interlock and Power On/Off Switches ............ 0000. e cee eee ee 5
Figure 5 Location of Self-Test Switch, Volume Control and Option Switches ... 6 Figure 6 Self-Test Procedure . 7 Figure 7 Game Option Settings 9 Figure 8 Game Price Settings... . 1
Figure 9 Coin Counter Option Settings ....... 0... cece eee eee ee eee 13 Figure 10 Opening the Control Panel and Replacing Switches . : Figure 11. MonitorRemoval ................e sees eee a Figure 12 Printed-Circuit Board Removal ...........6. 2. cece eee ence eee 19
Figure 13. Fluorescent Tube Replacement Figure 14 Power Distribution ........ Figure 15 Signal Distribution ......... 0.6... cece eee eee eee 22
Illustrated Parts Lists: Figure 16 Cabinet-Mounted Assemblies Figure 17 Control-Panel Assembly. .. . Figure 18 Fluorescent Light Assembly ....... ‘ Figure 19 Asteroids Deluxe™ Game PCB Assembly . . .-. 30
Figure 20 Regulator/Audio! PCBAssembly ..............00 cece eee eee Figure 21. Power Supply Assemblies for X-Y Games . Figure 22 American-Made Coin Door a : Figure 23 British-Made Coin Door ........... 0.00. cece eee ete eee eee
Notice Regarding Non-Atari Parts
WARNING
Use of non-Atari parts or modifications of your Atari game circuitry may adversely affect the safety of your game, and may cause injury to you and your players.
Atari, Inc.'s warranty (printed on the inside back cover of this manual) may be voided, if you do any of the following:
1.) you substitute non-Atari parts in your coin-operated game, or
2.) you modify or alter any circuits in your Atari game by using kits or parts not supplied by Atari.
Not only may the use of any non-Atari parts void your warranty, but any such alteration may also adversely affect the safety of your game, and may cause injury to you and your players.
vi
Location Setup
A. New Parts
The Asteroids Deluxe™/Cabaret game has two new parts. Even if you are familiar with Atari games, you should note these important differences. The new parts are: @ Deep-Well Coin Box. This new coin box conservatively holds $600 in U.S. quarters. Please note that $500 in quarters weighs over 11 kg (25 Ibs.), and $600 in quarters weighs 12% to 13% kg (28-30 Ibs.). @ Game PCB Circuitry. Most video games to date have used the raster-scan method of display. This game uses vector-generation with X and Y axes which allows better contrast and a greater number of moving objects, and draws lines at any angle.
MONITOR SHIELD.
CONTROL PANEL
XY MONITOR
COIN DOOR
REGULATOR! AUDIO I PCB
fe
GAME PCB
POWER SUPPLY
POWER ON/OFF SWITCH:
Figure 1 Overview of Game
In addition, Asteroids Deluxe™ is one of the first Atari games to have non-volatile memory for part of the high score table. This means that even if power is removed from the game, the three highest scores will permanently stay in memory. You may erase these scores by following the instructions in Figure 6, Self-Test Procedure.
These new parts, as well as all other major parts in the game, are illustrated in Figure 1. Throughout this manual, wherever one of these new_parts is mentioned, you will see this symbol:
B. Game Inspection
This new game is ready to play upon removal from the shipping carton. However, your careful inspection is needed to supply the final touch of quality control. Please follow these steps to help us insure that your new game was delivered to you in good condition.
- Examine the exterior of the game cabinet for dents, chips, or broken parts.
- Unlock and open the access panel of the cabinet and inspect the interior of the game as follows: @ Check that all plug-in connectors (on the game harness) are firmly seated. Replug any connectors found unplugged. Don’t force connectors together. The connectors are keyed so they only go on in the proper orientation. A reversed edge connector will damage a PCB and will void your warranty. @ Check that all plug-in integrated circuits on the game PCB are firmly seated in their sockets.
@ Note the location of the game’s serial number—it is printed on the special label on the outside of the game cabinet. Verify that the serial numbers also stamped on the Asteroids Deluxe™ Game PCB, Regulator/Audio | PCB and monitor are all identical. A drawing of the serial-numbered components is on the inside front cover of this manual. Please mention this number whenever you call your distributor for service. @ Check ail major subassemblies such as the power supply, control panel and monitor for secure mounting.
Cc. Game Installation
Figure 2 Installation Requirements
Power 140 watts Temperature 0 to 38° C (32 to 100°F) Humidity Not over 95% relative Space Required 52x60 cm (20 3/8 x 23% in.) Game Height 139 cm (54% in.)
- Voltage Selection This game has two possible power supplies: the U.S. or international power supply. The U.S. power supply operates on one line voltage range: 105 to 135 VAC. The international power supply has four colored voltage selection plugs and operates on the line voltage of almost any country in the world.
Before plugging in your game, check your power supply. If the supply doesn’t have voltage selection plugs and a connector at J3 (see Figure 3), then the game operates on any voltage from 105 to 135 VAC. lf the supply has the colored voltage selection plugs, make sure that the voltage selection plug is correct for your location’s line voltage. Check the wire color on the plug and see if it is correct per Figure 3.
Asteroids Detuxe™/Cabaret
Line Voltage Range Plug Cofor 90-110 VAC (100) Violet 105-135 VAC (120) Yellow 200-240 VAC (225) Blue 220-260 VAC (240) Brown,
Figure 3
International Line Voltage Selection
- Interlock and Power On/Off Switches To minimize the hazard of elecirical shock while working on the inside of the game cabinet, an interlock switch has been installed (see Figure 4). One is located behind the access panel and one is behind the coin door. These switches remove all AC line power from the game circuitry when a door is opened.
Check for proper operation of the interlock switches by performing the following steps: @ Plug the AC line power cord into an AC outlet. @ Be sure the access panel and the coin door are closed. @ Set the power on/off switch to the on position. Within approximately 30 seconds the monitor should display a picture. @ Slowly open the rear access panel. The monitor picture should disappear when the panel is opened approximately 2% cm (1 inch). Close and lock the access pane! and repeat this step with the coin door. @ if the results of the preceding step are satisfactory, the interlock switches are operating properly. If the monitor doesn’t go off as described, check to see if the corresponding interlock switch is broken from its mounting or stuck in the on position.
Asteroids Deluxe Cabaret
SAFETY INTERLOCK SWITCH
POWER ON/OFF SWITCH
Figure 4 Interlock and Power On/Off Switches
Asteroids Deiuxe Cabaret
D. Self-Test Procedure Part of the self-test procedure includes a display
of the operator-selectable game options. Therefore, This game will test itself and provide data to dem- we suggest you run the self-test procedure anytime onstrate that the game’s circuitry and controls are you need to change the game’s options. operating properly. The data is provided on the monitor and the game Speaker; no additional equipment To run the seli-test, follow the instructions out: is necessary. lined in Figure 6.
> ASTEROIDS DELUXE™ GAME PCB
OPERATOR OPTION ‘CH VOLUME CONTROL ‘SWITt
VOLUME INCREASE: TURN CLOCKWISE
SELF-TEST SWITCH (EURO- PEAN GAMES)
Figure 5 Location of Self-Test Switch,
Volume Control and Option Switches
Asteroids Deluxe Cabaret
Figure 6 Self-Test Procedure
Results if Instruction Test Passes Results if Test Fails
- Set self-test The monitor displays RAM FAILURE is indicated by a sequence of low and high beeps. Note the sequence switch to on post tion (see Figure 5). the picture below. The game produces only a very short beep sound.
Example only—detail on next page explains these four rows of symbols.
- Activate all 7 control-panet switches, the slam switch, and coin door switches. a As you activate and deactivate each switch, you'll hear a short low beep. Both start switch LEDs will be constantly lit.
- Erasing the High Score Table (optional) The current three highest scores are held in permanent memory, even if the game is unplugged. These three are marked with spaceship symbols in the high score table. If you want to erase these scores, simultaneously press the rotate left, rotate right, thrust, and fire buttons. The ERAS/NG message near the center of the screen will then be displayed for several seconds, until the entire table is erased.
- When satisfied with test, set selftest switch to off position. of beeps and determine which RAM(s) may be bad. To restart the sequence, press the reset pushbutton on the game PGB, or set the self-test switch to off, then again to the on position. Possible Bad Sequence of Beeps RAM Chip Location(s) 1 low uu 2 lows Lt, M1 1 high, 1 low M1 2 highs, 1 low M3. 2 highs, 2 lows M3, R3 3 highs, 1 low R3 4 highs, 1 low NB 4 highs, 2 lows N3, P3. 5 highs, 1 low P3 Any bad RAMs must be replaced before the self-test can continue.
ROM/PROM FAILURE is indicated by the display of the actual PROM or ROM chip location(s) on the center lefi side of the monitor screen. Both a PROM or its equivalent ROM are inserted into the same sockei. Therefore, the displays are correct regardless. of whether your game PCB has PROMs or ROMs or a combination of both. If the screen is blank or displays “garbage,” the chips at locations N2 and/or J1 are probably bad.
INVERTING CIRCUITRY FAILURE is indicated by the BANK ERROR message in the lower center part of monitor screen. This circuitry is necessary for the cocktall-table version to function properly, that is, the picture turns 180° with every other ship in 2-player cocktail games.
AUDIO CHIP FAILURE is indicated by the ERROR message at center bottom of the screen, The large audio chip is at location M7/8 on the game PCB.
You will not hear a short low beep for the defective switch, or dark LED.
[Seif-test continued on next page]
Asteroids Deluxe “Cabaret
Figure 6 Self-Test Procedure, continued
Coin Bonus Adder 0, 5, 6 or 7 = No bonus coins 1 = For every 2 coins* inserted, game logic adds 1 more coin* 2 = For every 4 coins” inserted, game logic adds 1 more coin* 3 = For every 4 coins” inserted, game logic adds 2 more coins* 4 = For every 5 coins” inserted, game logic adds 1 more coin*
Center Mech Multiplier 0 = Center coin mech x 1 (Both these settings affect 1 = Center coin mech x 2 the left mech in a 2-mech door)
‘ight Mech Multiplier = Right coin mech x 1 Right coin mech x 4 Right coin mech x 5 Ri Q
3 = Right coin mech x
iame Price Free play 1 coin™ for 2 plays 1 coin* for 1 play G
3 = 2coins* for 4 play en)
*In the U.S. a “coin” is defined as 25%. In Germany a “coin” is 1 DM.
Game Language 0 = English 1 = German 2 = French 3 = Spanish
Ships at Game Start 0 = Game starts with 2 to 4 ships 1 = Game starts with 3 to 5 ships 2 = Game starts with 4 to 6 ships 3 = Game starts with 5 to 7 ships (See graphic display in third line for exact number of ships)
Minimum Number of Plays 0 or 2 = 1-play minimum
PN or 3 = 2-play minimum A Graphic display of number of ships per game (up to 7)
| O 0 O — Point score at which a bonus ship is granted (blank if no bonus ship) ‘Bonus Ship 0 = Bonus ship at every 10,000 points 1 = Bonus ship at every 12,000 points 2 = Bonus ship at every 15,000 points 3 = No bonus ship (adds 1 ship at game start)
E. Option Switch Settings
- Bonus Play Feature Asteroids Deluxe™ offers a bonus play for certain combinations of coins inserted. This bonus feature is operator-selectable, meaning you may choose to offer it or not.
For example, with your game set at 50¢ per play, players who deposit four successive quarters or a $1.00 coin, then press the start button, will receive a bonus play. Therefore, players receive 3 plays for $1.00.
This bonus feature encourages players to insert more money than just the minimum 50¢ you could require for one game. Various other bonuses are available (see Figure 8).
Figure 7 Game Option Settings
To change toggle positions on the switch assemblies, you need Not remove the game PGB, The switches, usually colored blue, are easily accessible when the Asteroids Deluxe™ Game PCB is mounted in place. When changing the options, verify proper results on the monitor display by performing the self-test. Note that changing an option on any of the following eight toggles will cause an immediate change on the monitor screen during the self-test.
Toggle Settings of 8-Toggle Switch on Asteroids Deluxe PCB (at R5—LEFT switch when PCB is in game) 8 7 6 5 4 3 2 1 Option
On On Off Off On On On Off
Off On
Off Off
On Oft
Not Used
on On On Off
On English language $ Off German language On French language Off Spanish language Game starts with 2 ships $ Game starts with 3 ships Game starts with 4 ships Game starts with 5 ships If set for no bonus ship or 50¢ play, add 1 ship per setting.
1-play minimum $ 2-play minimum Bonus ship at every 10,000 points $ Bonus ship at every 12,000 points Bonus ship at every 15,000 points No bonus ship
$ Manufacturer's suggested settings
- Coin Mechanism Multipliers Available since early in 1980, Atari’s new coin door has two or three mechanisms. All recent Atari game PCBs identify the different mechanisms in a certain patiern.
The right coin mechs are all the same to the game's logic, regardless of whether you have two or three mechs in your door. in addition, the logic sees the left mech in a 2-mech door and the center mech in a 3-mech door as the same. Refer to the diagram below. This pattern is important for you to know, So you can correctly set the “multipliers” for each mech. The multipliers determine how much each mechanism will be worth to the game’s logic.
The basic unit of measurement is 25¢, which equals a multiplier of x1. Therefore, if you have a 25€/25¢/$1 coin door, you will probably want to set the center and right option-switch multipliers at x 1/x 4. The left mech in a 3-mech door always has a value of x 1—you cannot change its value.)
You can set these multipliers with toggles 3 thru 5 on the Asteroids Deluxe PCB switch assembly at location L8. For exact settings of these toggles, refer to Figure 8.
- Examples of Option
Switch Settings
Figure 8 explains the options, giving twelve examples of the most common US. situations. The toggles mentioned are all in the switch at location L8; they only relate to game price, coin mechanism multipliers, and bonus play. You should set the toggles relating to other functions as you see fit, although Figure 7, 8, and 9 provide “$” signs indicating Atari’s recommendations.
Asteroids Deluxe ™/Cabaret
Figure 8 Game Price Settings The white block below contains Atari’s suggested settings. All numbers 1 thru 8 are toggle settings on the 8-ioggle switch at location L8, on the Asteroids Deluxe™ game PCB (the CENTER switch assembly).
50¢ PER PLAY: Bonus $50 = 1 play Bonus $.75 = 2 plays ‘No bonus $1.00 = 3 plays $1.00 = 3 plays
Straight 25¢ Door
25¢/$1,00 Door or 250/25¢/$1,00 Door
25¢ PER PLAY:
Bonus Bonus
No bonus $50 = 3 plays $1.00 = 5 plays
Straight On
25¢ Door (2) 4 On
25¢/$1.00 Door or 25¢/25°/$1.00 Ooor
Circled numbers refer to coin-door labels you should use with each situation (labels are illustrated on the following page).
Use the label no. 6 (indicated above with ©) only
if you set toggle 5 at PCB switch assembly R5 to off.
"1
Figure 8 Game Price Settings, continued For your information, we have defined below the switch settings for those options relating to game price, coin mechanism multipliers, and bonus play. This information is useful in case you need to temporarily set the Asteroids Deluxe™ game on free play, cor if you have German coin mechanisms in your door. The label no. 6 shown below should be used only if you set toggle 5 at PCB switch assembly R85 to off.
Toggle Settings of 8-Toggle Switch on Asteroids Deluxe PCB (at L8-—CENTER switch when PCB is in game) 7 6 5 4 KJ 1 Option
On
Off On On On Oft
Off Off
On Off
On On
Off On
Off Oif on On Off Off On Free play Off 1 coin® for 2 plays On 1coin* fort play $ ott 2 coins* for 1 play Right coin mech x 1 $ Right coin mech x 4 Right coin mech x 5 Right coin mech x 6 Center coin mech x 1 $ (Both these settings affect Center coin mech x 2 the left mech in a 2-mech door) No bonus coins $ For every 2 coins* inserted, game logic adds 1 more coin* For every 4 coins” inserted, game logic adds 1 more coin* For every 4 coins” inserted, game logic adds 2 more coins* For every 5 coins” inserted, game logic adds 1 more coin*
“In the U.S, a “coin” is defined as 25¢. In Germany a “coin” is 1DM.
$ Manufacturer's suggested settings To achieve bonus plays, all coins must be inserted before pressing start button.
oe A, @@ 2 coins =1 play
@ 1 coin = 1 play ATARI
KO @ e 2 coins = 1 play ATAR,
60086 4 coins = 3 plays
AO @@ 2coins
Am QY@@ 3 coins BO @ 4 coins
© @ 6 2 coins = 1 play A @ $1 coin =3 plays (Susan B. Anthony coin)
o7 @ 1 coin = 1 play ame’ 2 play minimum (2 coins = 2 plays)
(For operator use—write in the appropriate phrase. Use a permanent-ink water-resistant marker.)
Figure 9 Coin Counter Option Settings
[These toggles determine which coin mechanisms activate which counters]
Toggle Settings of 4-Toggle Switch on Game PCB (M12)
| A | 3 | 2 | 1 |
Two coin acceptors in the coin door: Two coin acceptors and a pushbutton utility coin switch in the game: Three coin acceptors in the coin door:
| On | On | Both acceptors activate all coin |
counters simultaneously.
| Off | On | Both acceptors activate 2 count- |
| BR | B | ers separately. |
3 83 & 8
| = | = | On | Off | Both acceptors activate all coin |
counters simultaneously.
| Off | Off | Both acceptors activate 2 count- |
ers separately. $ Do not use this setting.
Do not use this setting.
Utility coin switch will not actiyate a coin counter, if you donot hook up a separate counter. Both acceptors activate both coin counters simultaneously.
Utility coin switch will not activate a coin counter, if you do not hook up a separate counter. Left and right acceptors activate 2 coin counters separately. All 3 are same denomination and they activate all coin counters simultaneously,
Left and center acceptor activate ‘one coin counter; right acceptor activates another coin counter.
Left acceptor activates one coin counter; center and right acceptor activate another coin counter. Not for any currently designed 3-mech coin door,
Left, center and right acceptors activate 3 coin counters separately. $
$ Manufacturer's suggested settings
F. Game Play
Atari’s Asteroids Deluxe™ is a one- or two-player game with an X-Y or vector-generator monitor. The game depicts a third-person view of a player's spaceship battling to destroy asteroids, flying saucers and enemy ships or “death stars” (shaped like clusters of triangles). When hit, the asteroids and death stars will break into progressively smaller pieces.
Players can put up an octagon-shaped “‘shield” to temporarily protect their spaceship. However, this shield wears out with use.
The game has five possible modes of operation: Attract, Ready-to-Play, Play, High Score Initial, and Seif-Test. Self-test is a special mode for checking the game switches and computer functions. You may enter this mode at any time. When entered, all game credits are cancelled.
- Attract Mode The attract mode begins when power is applied to the game, after a play or high score initial mode, or after self-test. This mode is continuous and is only interrupted when a game is paid for and accepted or when you enter self-test.
in this mode, the monitor displays two possible pictures. One picture is of randomly tumbling asteroids, large and small saucers, and death stars—all in a simulated game. The other picture shows the ten currently highest scores. > If you erase the special “permanent” memory (see Figure 6, Self-Test Procedure), then the second picture with the high-score table will not appear on the screen. The table is redeveloped from scores of subsequent games.
- Ready-to-Play Mode This mode begins when sufficient coins are accepted for a one- or two-player game. It ends when the 1 PLAYER START or 2 PLAYER START pushbutton is pressed.
Operators may choose one- or two-play minimums by selecting one of the option switch settings on the game PCB (see Figure 7, Game Option Settings). If you select the two-play minimum and a player inserts enough money for only one play, the message 2 GAME MINIMUM and CREDITS ‘2 stays on the screen until the required number of coins are inserted.
When this mode begins, the message PRESS START flashes immediately below ihe center score at the top of the screen. The displayed pictures are otherwise the same as those shown in the attract mode.
- Play Mode The play mode begins when either start pushbutton is pressed. The mode ends when the player’s last ship of the game is lost.
Six large asteroids appear and drift in from the outer edges of the display. By pressing the ROTATE LEFT and ROTATE RIGHT pushbuttons on the control panel, the player may aim a spaceship toward any of the asteroids. The player uses the FIRE pushbutton to shoot at the asteroids and other objects.
When shot, each large asteroid divides into two medium-sized asteroids, and the game adds 20 points to the player's score. Medium-sized asteroids, when shot, divide into two small-sized asteroids, and the game awards 50 points to the player. When shot, the smallest asteroid disappears and the game adds 100 points to the player's score.
In addition to asteroids, the players can score points for shooting the various enemy ships. When hit, the large ships (‘death stars” shaped {ike hexagons) score 50 points and break into three diamond shapes. The medium-sized enemy or diamond, when hit, grants the player 100 points and breaks into two small triangular pieces. These small pieces disappear when the player hits them, and the score increases by 200 points.
At any time during game play, a flying saucer may appear from either side of the display. The game awards players 200 points for shooting a large saucer and 1000 points for a small saucer. (The latter is asmaller target for players, though not any faster moving than the large one. It also shoots more accurately.)
The player's objective in the game is to shoot and destroy as many asteroids, saucers, and enemy ships as possible before ail his or her spaceships are destroyed. A ship is destroyed if an asteroid, saucer or enemy ship smashes into it, or if a flying saucer shoots it. To prevent losing a ship, the player May press the THRUST pushbutton to move out of the path of an oncoming object.
As an emergency maneuver, a player can press the SHIELDS pushbutton. An octagon will then appear around the player’s ship as protection from atl enemies. For challenge the shield power lasts only about 10 seconds, but the power is renewed with each ship. The amount of shielding power available is shown by the brightness of the octagon (dim means almost exhausted power).
An operator option allows you to award an extra ship each time a player's score reaches multiples of 10,000, 12,000 or 15,000 points. As an alternative, you may not offer any bonus ships at all to players. Refer to Figure 7, Game Option Settings, for how to set your game for this option.
When the last ship of the game is destroyed, the message GAME OVER appears below the high score. This message remains for three seconds before the high score initial mode begins.
- High Score Initial Mode At the beginning of the high score initial mode, the player instructions appear at the top of the screen, and A_____ appears at the lower center of the display. Players enter initials one character at a time.
By pressing the ROTATE LEFT pushbutton, the displayed character steps through the alphabet from A to Z. By pressing the ROTATE RIGHT pushbutton, the character shown will step backwards through the alphabet from A to a blank space, then from Z to A. Once the game displays the desired letter, players should press the SHIELDS pushbutton to record the letter, then an A appears in the next space.
If players need only two letters for their initials, they should use the blank between Z and A in one of the three locations. Pressing the SHIELDS pushbutton a third time will cause the initials and game score to be transferred to the high score table. This table contains a maximum of 10 scores and appears during the attract mode.
Maintenance
and Repair
All games require certain maintenance to keep them in good working order. Clean, properly maintained games will attract players and earn more profits.
The most important maintenance item is running the self-test every time you collect money from the coin box. Just looking at a game will not tell you if light-emitting diode (LED) switches or leaf switches are broken, or if LEDs have burned out. The self-test will inform you of any of these possible problems.
Second, you should regularly clean the outside of the game and the coin mechanisms. In addition, you will need to regularly clean the leaf-switch contacts: for details see this chapter.
A. Cleaning
The exterior of the game cabinet and the metal and glass surfaces may be cleaned with any nonabrasive household cleaner. If desired, special coin machine cleaners that leave no residue can be obtained from your distributor.
Do not dry-wipe any of the acrylic panels, because dust can scratch the surface and result in fogging the plastic.
B. Fuse Keplacement
This game coniains five fuses—all on the power supply assembly (not including the monitor fuses). Replace fuses only with the same type as listed in Figure 21 of this manual. See the Quadrascan™ monitor manual for the monitor fuse data.
C. Opening the Control Panel
Prior to repairing or replacing any switch on the control panel or prior to removing the monitor, unplug the game. Then open the coin door.
Reach through the coin-door opening and open both luggage-style latches, located on the underside of the control panel (see Figure 10). Push up on the underside of the contro! panel with one hand. With the other hand lift the top edge of the panel towards you.
- Leaf-Switch Replacement
All five of these leaf switches operate on 5 volts at a very low current. Therefore, pitting of these switches would be extremely rare. Probably the only reason that pitting would occur is in very highhumidity locations. Don’t bumish the switch contacts. Burnishing them removes their plating, thus increasing the corrosion of the contacts. The best method of cleaning the switch contacts is to wipe them with a non-abrasive surface. A business card works very well.
To replace any switch, remove both of its screws with a Phillips-nead screwdriver—see Figure 10.
If the white button itself needs to be replaced, turn the stamped nut with a wrench in a counterclockwise direction, as seen from the inside of the control panel. The white ring on the outside of the control panel should not spin, due to its design.
- LED Start-Switch Replacement The light-emitting diode (LED) switches on the control panel have a very low failure rate. In case a switch should ever be suspect, first test it per the description that follows. To replace the switch, refer to Figure 10.
- Remove the wires from the suspected switch.
- Set multimeter to ohms scale. Set ohms scale to Rx 1, then zero the meter.
- Connect multimeter leads to appropriate LED switch contacts (see Figure 10 for designation of switch contacts).
- Check contacts (push and release the switch button) for closed and open continuity.
- If the contacts do not operate sharply or always remain closed or open, then replace the LED switch as outlined in the figure.
To remove LED switch:
@ Remove all wires from the faulty switch. @ Turn the switch counterclockwise while holding the black cone-shaped bushing on the outside of the control panel. © Install a new switch using the reverse procedure.
@ Reconnect the hamess wires.
NORMALLY CLOSED / Mey conTacT
_-~ NORMALLY OPEN “~~ (N.0.) CONTACT
mM
\ LIGHT-EMITTING-DIODE COMMON / (LE.D.) CONTACTS CONTACT
LEAF SWITCH
TURN NUT TO REMOVE WHITE BUTTON
Figure 10 Opening the Control Panel and Replacing Switches
Asteroids Deluxe ™/Cabaret
D. Monitor
Removal
- Be sure the game is unplugged from its wall outlet! Then open the control panel as described in Section C, Opening the Control Panel.
- Remove the acrylic monitor shield by loosening the retainer mounting hardware. Lift up the shield and slide out its iower edge.
- Carefully remove the black cardboard bezel (it lies on top of the wood cleats and is attached with staples).
- Open the rear access panel and unplug the 12-pin monitor harness connector.
- Remove the four bolts, nuts, flat and lock washers that hold down the metal chassis.
- Carefully lift the monitor chassis out of the front opening of the game cabinet (see WARNING).
Disassemble in the order indicated. (Circled numbers match the steps above.)
Figure 11 Monitor Removal
REGULATOR! AUDIO | PCB
y.) ASTEROIDS DELUXE™ —— GAME PCB
Figure 12 Printed-Circuit Board Removal
E. Printed-Circuit Board Kemoval
You may wish to remove the game printed-circuit board (PCB) or the Regulator/Audio | PCB for service or inspection. To do this, refer to Figure 12 and proceed as follows:
- Uniock and open the rear access panel.
- Remove the securing screw that holds down the PCB in its slots.
- If you are removing the game PCB, first remove the two tie-wraps that fasten the edge connector to the game PCB. Then unplug the edge connector on the game PCB. If you are removing the Regulator/Audio | PCB, simply disconnect the three small harness connectors on this PCB.
- Carefully slide either PCB straight out of its grey plastic slots. Be careful not to twist the PCB, as this may loosen connections or components. Replace or repair as required.
- Reinstall the PCB, making sure that the connectors are properly plugged in. Note that all connectors are keyed to fit on only one way, So if they don’t slip on easily, don’t force them! A reversed connector will probably damage your PCB and will void the warranty.
- Replace the securing screw in the PCB. Reinstall the tie-wraps used to secure the edge connector to the game PCB. Close and lock the rear access panel.
- Check that the operation of the game is correct by performing the self-test. This is especially important with any game when you replace a PCB. Normally the only adjustments on this game are option switch changes (made on the 4- or 8-toggle switches). Unless you are a qualified technician, do not turn any of the knobs near the game PCB's edge connector. Also do not turn the small knob on the Regulator/Audio | PCB.
F. Fluorescent Tube Keplacement
- Be sure the game is unplugged from its wall outlet. Open the coin door. Remove the two Y-shaped connectors from the ends of the fluorescent tube. Now carefully remove the tube from its clamps by pulling it towards you.
- Replace with a new tube. Do not snap the tube in vigorously—you may break it, causing an implosion!
- Close the coin door and lock it.
Figure 13 Fluorescent Tube Replacement
lk
‘el!
G. Game Operation
With this manual you received two large sheets that contain the wiring and schematic diagrams for the Asteroids Deluxe™/Cabaret game. Sheet 1, Side A, includes information that shows the arrangement of these diagrams. These diagrams include information that explains the functions of the circuits and defines inputs and outputs.
Atari’s Asteroids Deluxe™ is a microprocessorcontrolled game. The microprocessor is mounted on the game PCB. The game PCB receives switch inputs from the control panel and coin door. These inputs are processed by the game PCB and output to the monitor, Regulator/Audio | PCB, and control panel.
The monitor is an X-Y monitor. Therefore, the monitor receives signals for the X, Y and Z axes. Since the location of the beam in the monitor is totally controlled by the X- and Y-axis outputs of the game PCB, the game PCB does not contain a standard sync circuit. The X- and Y-axis inputs to the Asteroids Deluxe ™/Cabaret
monitor step in increments of 1024 steps for the X (horizontal) axis, and 768 steps for the Y (vertical) axis. The Z axis merely controls the intensity of the beam.
The Regulator/Audio | PCB performs two functions: 1) it regulates the + 10.3 VDC from the power supply to + 5 VDC, and 2) it amplifies the audio output from the game PCB. The +5 VDC from the Regulator/Audio | PCB provides most logic power to the game PCB. The audio output from the Regulator/Audio | PCB directly drives the game speaker and is controlled by the volume control, mounted on the bracket inside the coin door.
The power supply is the source of all voltages in the game. These voltages are protected by four fuses (F3 thru F6) in the fuse block on the power supply Chassis. The primary winding of the power supply transformer is protected by the cartridgetype fuse F1 in the power supply chassis.
Figure 14 illustrates the distribution of power in this game. Figure 15 illustrates the distribution of signals.
MONITOR
REGULATOR! AUDIO | PCB FLUORESCENT LAMP.
GAME PCB
COIN DOOR
POWER INTERLOCK SWITCHES
POWER SUPPLY
_ AC POWER CORD
POWER ON/OFF SWITCH
Figure 14 Power Distribution
CONTROL PANEL MONITOR
GAME SPEAKER
REGULATOR! AUDIO | PCB
&
Fy
VOLUME CONTRO! z
ES
COIN DOOR
> GAME PCB
Figure 15 Signal Distribution
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
Illustrated
Parts Lists
This chapter provides you with the necessary information for ordering replacement parts for your Asteroids Deluxe™/Cabaret game. Please note that, for simplicity, common hardware has been deleted from most of these parts lists. This includes screws, nuts, washers, bolts, etc.
The parts lists are arranged in alphanumeric order. For example, all “A-” prefix numbers come first. Following this are numbers in sequence evaluated up to the hyphen, namely 00- thru 99-, then 000598- thru approximately 190000-.
When ordering parts from your distributor, give the part number, part name, applicable figure number of this manual, and serial number of your game. This will help to avoid confusion and mistakes in your order. We hope the results will be less downtime and more profit from your game.
036889-01 Schematics, Self-Test Label & Manuals— (Monitor Bezel) ‘see parts list on following page 036669-02 036263-05 (Monitor Shield) (Monitor Overlay) quien Control Panel Assy.— see Figure 17 78-60003 (Monitor Tape) Fluorescent Light— ‘see Figure 18 148001-001, (Speaker) 78-3408 (Latch) 036891-01 A036874-01 (Wood Cabinet)
(Gilley 92-052 036887-01 (Monitor) (Attract, Panel) 71-2110 (Lock)
03016902 (ol. Ctr /Brkt. Assy.) 030168.01 (ol. Cirl. Brkt) 19-9032 (Volume Ctrl.) 035745-03 (10-In. PCB Retainer)
Reg./Audio | PCB Assy.— see Figure 20
'036663-01 (Rear Panel)
75-07017 (PCB Spacer) 035745-02 see Figures 22, 23 . iN (184n. PCB Retainer) 78-24012 (PCB Tie-Wrap) A036189-01 (inter. Sw./Brkt.) Game PCB Assy.— see Figure 19 007882-02 (Inter, Sw. Cover) 034536.03 eS A035043-01, .02, -03 (Foam) (Coin Box) "A036897-01 paaatenas (Main Harness) 03628201 03695001 Paver beer — (Coin Box Brkt) (Coin Deflector ase ( ) rege01 )
(Leg)
NOTICE TO ALL PERSONS RECEIVING THis PRAWING 009992-01 : Reproduction, fot i speciio wnten permission of har, ‘ne Suma, & (Oniott Sw. Cover) 's drawing is only conditionally issued, and either re- 61-1624 A034631-01 pt the it conte ti rs Tight mo lhonee to so, tho sujet mater line aay (Oniott Sw) (OnlOF Sw. Assy.) A034841.01, Inger any des fteal information oon, 63.01 mor any Kom to reprosuce this drawing or soy part there, 006450-01 A034863-01, ot Except for marulecture by vendors of Aturk Incr ard (On/Ott Sw. Prate) or A035989-01 for manufacture under the corporation's wilt license, f ‘Power Cord) no right to reproduce this drawing is granted or the sub: Ject matter thereof unless by written agreement with or written permission from the corporation.
Figure 16 Cabinet-Mounied Assemblies A036873-xx A
Figure 16 Cabinet-Mounted Assemblies, continued Parts List
Part No. Description
A030169-02 Volume Control/Bracket Assembly A034631-01 Power On/Off Switch Assembiy A034841-01 US. Strain-Relief Power Cord A034863-01 German Strain-Relief Power Cord ASS A035943-01 Deep-Well Coin Box Assembly (for all the same coins) A035943-02 Deep-Well Coin Box Assembly (for two different coin denominations—has one separator) A035943-03 Deep-Well Coin Box Assembly (for three different coin denominations—has two separators) A035989-01 Australian Strain-Relief Power Cord A036189-01 Interlock Switch/Bracket Assembly (moditied for safety) A036897-01 Main Harness Assembly A036874-01 Wood Cabinet Assembly {includes legs and PCB retainers) The following six items are the technical information supplements to this game: DP-173-01 Asteroids Deluxe™/Cabaret Schematic Drawings (Sheet 1) DP-173-02 Asteroids Deluxe/Cabaret Schematic Drawings (Sheet 2) ST-173 Label with Self-Test Procedure and Option Switch Settings TM-151 Instruction and Service Manual for Electrohome G05-802/805 Quadrascan™ X-Y Monitor TM-164 Service Manual for Wells-Gardner 15- and 19-Inch Quadrascan™ X-Y Monitors TM-173 Asteroids Deluxe/Cabaret Operation, Maintenance and Service Manual 02-305010 %-Inch Black Plastic T-Molding 19-8032 50-Ohm, 1212-Watt, Wirewound Rheostat (vo/ume control) 61-162A DPST Power On/Off Toggle Switch 71-2110 Panel Cartridge Lock Mechanism (for rear access panel) 75-07017 Spacer for Mounting Printed-Circuit Boards 78-24012 5-Inch Beaded Nylon Tie-Wrap (for Game PCB edge connector) 78-3201 Cabinet-Leveling Leg 78-3408 Spring Draw Latch 78-6D003 YeWide Adhesive Transfer Tape (2x 9 inches required for monitor) 92-045 or Electrohome 15-Inch Quadrascan™ X-Y Monitor, or 92-052 Wells-Gardner 15-Inch Quadrascan™ X-Y Monitor 006450-01 On/Off Switch Mounting Plate 007882-02 Interlock Switch Cover 009992-01 On/Off Switch Cover 030168-01 Volume Control Mounting Bracket 034536-03 Foam Vibration Damper (for both PCBs) 035745-02 18-Inch Plastic PCB Retainer 035745-03 1nch Plastic PCB Retainer -\) 035942-01 Deep-Well Coin Box Separator 036262:01 Coin Box Bracket 036263-05 Blue Monitor Overlay 036663-01 Rear Access Panel (does not include lock) 036669-02 Smoke-Color Monitor Shield 036670-01 Metal Retainer for Monitor Shield 036686-01 Sheet of Game Pricing Labels 036887-01 Attraction Panel with Graphics 036889-01 Cardboard Monitor Bezel 036891-01 Speaker Grille 036950-01 Cardboard Coin Deflector 148001-001 6x@Inch 4-Ohm 15-Watt Oval High-Fidelity Speaker
Asteroids Deluxe Cabaret
A036899-01 (Hamess)
62.038 (Start 0)
75.0178 Fat Wise) $e
75-9910W0. (18/32-In. Nut)
03312791 © (Bushing)
‘A036046-01 uiton Assy.)
NOTICE TO ALL PERSONS RECEIVING THIS DRAWING CONFIDENTIAL: Reproduction forbidden without the Specific written permission of Atari, Inc., Sunnyvale, CA. This drawing is only conditionally’ issued, and reither receipt nor possession thereof confers or Wansfers any fight in, oF license to use, the subject matter of the draw: ing or any design or technical information shown thereon, nor any tight to reproduce this drawing or any part thereof. Except for manufacture by vendors of Atari, Inc., and for manufacture under the corporation's written lloense, no rignt to reproduce this drawing is granted or the subject matter thereof unless by writien agreement with or written permission from the corporation, (Leaf Sw./Btn. Holder)
75-9910NO (6/8-In. Nui)
Figure 17 Control Panel Assembly A036878-01
Parts List
Part No. Description
A036046-01 Button Assembly A036888-01 Control Panel with Graphics A036899-01 Controi Panel Harness Assembly 62-039 SPDT Momentary Pushbutton Switch, with Red Cap and Light-Emitting Diode 75-017S 7/16-Inch Fiat Plain SAE-Standard Zinc-Plated Stee! Washer 75-9910NO 5/8-11 Steel Stamped Nut 75-9910W0 15/32-32 Steel Stamped Nut 033127-01 Black Molded Switch Bushing 160013-001 Leaf Switch with Button Holder 160004-001 Leaf Switch Only
70-304 (Tube)
NOTICE TO ALL PERSONS RECEIVING THIS DRAWING CONFIDENTIAL: Reproduction forbidden without the Specific written permission of Atari, Inc., Sunnyvale, CA, This drawing Is only conditionally issued, and neither receipt nor possession thereof confers or transfers any right in, or license to use, the subject matter of the drawing of any design or technical information shown thereon, nor any right to reproduce this drawing or any part thereof. Except for manufacture by vendors of Atari, Inc, and for manufacture under the corporation's written license, no right to reproduce this drawing is granted or the subject matter thereof unless by writien agreement with or written permission from the corporation. (Siarter)
99-1109 (Socket)
‘A005493-01 (Harness)
99-11008 (Transformer) 99-11011 (Clamp)
035835-01 (Connector)
79.561816P (Wire Nut)
Figure 18 Fluorescent Light Assembly A036205-01 c
Parts List
Part No. Description
A005493-01 Fluorescent Light Harness Assembly 70-304 18-Inch 15-Watt Cool White Fluorescent Tube 79-561816P Wire Nut for 16- to 18-Guage Wires 99-11003 Fluorescent Lamp Starter
99-11008 Bailast Transformer 99-11009 Starter Socket 99-11011 1¥2-Inch Clamp 035835-01 Y-Lead Connector
| foo00000000 Use IC pads enclosed with dotted lines
when Inserting 74LS245,
Use other pads when inserting an 8304B.
by wi permission (rom the corporation. ER =e OR
3 808
SE 18 § OTE ees Gua . OT ge see) [ieee fare ee een] ae er :
i Th ey GE me Titeiedy — = ; ats = [oer eg 4 Ig84 tif =, pai Par [a4 [Ser [es =
s = Pa we ary = ae ES [aa ER wey | oan Rag aa z 4 6 8 10
c Figure 19 Asteroids Deluxe™ Game PCB Assembly A036471-01 and -02
Asteroids Deluxe /Cabaret
Figure 19 Asteroids Deluxe™ Game PCB Assembly Parts List
Part No. Description (Reference Designations and Locations in Bold)
012294-01 Audio 0 N-Channel MOS/LS! Custom Chip (M7/8) 19-007 10K Ohm, + 20%, 1%W 8-Pin Dual-Inline-Package Resistor Network (RP1, RP2—use only if board has 74LS170s or 74LS670s at locations F3, H3, J3) 19-315103 10K Ohm Vertical PCB-Mounting Cermet Trimpot (R149, 152) 21-101104 -1uf, + 10%, Radial-Lead Epoxy-Dipped 100V Mylar Capacitor (C118-120) 21-101153 .015 uf, + 10%, Radial-Lead Epoxy-Dipped 100V Mylar Capacitor (C30) 24-250105, 1 uf Aluminum Electrolytic Fixed Axial-Lead 50V Capacitor (C49, 50, 74, 83, 85, 103) 24-250106 10 uf Aluminum Electrolytic Fixed Axial-Lead 25V Capacitor (C121, 122) 24-250107 100 uf Aluminum Electrolytic Fixed Axial-Lead 25V Capacitor (C17) 24-250226 22 uf Aluminum Electrolytic Fixed Axial-Lead 25V Capacitor (C104) 24-250477 470 uf Aluminum Electrolytic Fixed Axial-Lead 25V Capacitor (C72, 73) 24-500475, 4.7 uf Aluminum Electrolytic Fixed Axial-Lead 50V Capacitor (C22) 28-101100 10 pf Epoxy-Dipped 100V Radial-Lead Mica Capacitor (C87, 95) 28-101101 100 pf Epoxy-Dipped 100V Radial-Lead Mica Capacitor (C77) 28-101100 220 pf Epoxy-Dipped 100V Radial-Lead Mica Capacitor (C88, 89, 109, 110) 28-101271 270 pf Epoxy-Dipped 100V Radial-Lead Mica Capacitor (C46) 28-101391 390 pf Epoxy-Dipped 100V Radial-Lead Mica Capacitor (C75) 28-101680 68 pf Epoxy-Dipped 100V Radial-Lead Mica Capacitor (C106, 111) 29-006 1 uf, +10%, 35V Tantalum Capacitor (C21, 51, 116) 29-088 -1 uf Ceramic-Disc 25V Radial-Lead Capacitor (C1-16, 18-20, 23-29, 31-44, 47, 48, 52-71, 76, 84, 86, 90-92, 94, 96-102, 105, 107, 108, 112-115, 117) 31-1N100 100V Type 1N100 Germanium Switching Diode (CR3, 4, 11) 31-1N914 75V Type 1N914 Silicon Switching Diode (CR1, 5) 31-1N4001 50V Type 1N4001 Silicon Rectifier Diode (CR7-10) 32-1N756A 8.2V, +5%, Type 1N756A Zener Diode (CR6, 12) 33-2N3906 Type 2N3906 PNP Switching and Amplifying Transistor (Q1, 4, 5, 11-13) 34-2N3904 Type 2N3904 NPN 60V 1-Watt Transistor (Q2, 3) 34-2N6044 Type 2N6044 NPN Darlington Transistor (Q8-10) 34-MPSA06S, Type MPSAO6S NPN 80V 500ma Transistor (Q6, 7)
| 37-LM324 | Type LM324 Integrated Circuit | (P11) |
37-TLO82CP Type TLO82CP Integrated Circuit (A12, C12)
| 37-4016B | Type 4016B Integrated Circuit | (R11, B12, D12) |
| 37-555 | Type 555 Timer Integrated Circuit | (N11) |
| 37-74LS00 | Type 74LS00 Integrated Circuit | (C5, N4) |
| 37-74LS02 | Type 74LS02 Integrated Circuit | (D5, P10. Also, for -02 PCB assy. only: C7) |
37-74LS04 Type 74LS04 Integrated Circuit (L4, R9) 37-74LS08 Type 74LS08 Integrated Circuit (E5, K5, R6, B8)
| 37-74LS10 | Type 74LS10 Integrated Circuit | (A8, N8) |
| 37-74LS14 | Type 74LS14 Integrated Circuit | (B5) |
| 37-74LS20 | Type 74LS20 Integrated Circuit | (E4) |
| 37-74LS32 | Type 74LS32 Integrated Circuit | (M4, N5, B9) |
| 37-74LS42 | Type 74LS42 Integrated Circuit | (L5, E6, E8) |
| 37-74LS74 | Type 74LS74 Integrated Circuit | (03, A6, R7) |
| 37-74LS83 | Type 74LS83 Integrated Circuit | (M5) |
| 37-74LS86 | Type 74LS86 Integrated Circuit | (P4) |
| 37-74LS109 | Type 74LS109 Integrated Circuit | (A9) |
| 37-74LS139 | Type 74LS139 Integrated Circuit | (L2, E3) |
[Continued on next page]
Asteroids Deluxe Cabaret
Figure 19 Asteroids Deluxe™ Game PCB Assembly, continued Parts List
Part No. Description (Reference Designations and Locations in Bold)
| 37-74LS157 | Type 74LS157 Integrated Circuit | (F2, H2, J2, K2, F5, A10, B/C10, C10, O/E10, E10, FiH10) |
| 37-74LS161 | Type 74LS161 Integrated Circuit | (D6) |
| 37-74LS164 | Type 74LS164 Integrated Circuit | (P8, R8, K9) |
| 37-74LS174 | Type 74LS174 Integrated Circuit | (P6, D8, F10, N10) |
| 37-74LS175 | Type 74LS175 Integrated Circuit | (M6, 9) |
37-74LS191 Type 74LS191 Integrated Circuit (K4, C9, D9, E9, F9, H9, J9)
| 37-74LS193 | Type 74LS193 Integrated Circuit | (F4, H4, J4) | |
| 37-74LS244 | Type 74LS244 Integrated Circuit | (B1,C1, M9) | |
| 37-74LS245 | Type 74LS245 Integrated Circuit | (P1,E2) Acceptable substitute is part no. 37-8304B | |
| 37-74LS251 | Type 74LS251 Integrated Circuit | (J10, L10) | |
| 37-74LS253 | Type 74L$253 Integrated Circuit | (P5) | |
| 37-74LS259 | Type 74LS259 Integrated Circuit | (M10) | |
| 37-74LS273 | Type 74LS273 Integrated Circuit | (F6, H6, J6, K6) | |
| 37-74LS367 | Type 74LS367 Integrated Circuit | (H5, J5) | |
| 37-74LS393 | Type 74LS393 integrated Circuit | (B3, D4) | . |
| 37-74LS374 | Type 7418374 Integrated Circuit | (L9,B10,D10) Acceptable substitute is part no. 37-74LS273 | |
| 37-74LS670 | Type 74LS670 Integrated Circuit | (F3,H3, J3) Acceptable substitute is part no. 37-74LS170 | |
| 37-7404 | Type 7404 Integrated Circuit | (B4, H10) | |
| 37-7406 | Type 7406 Integrated Circuit | (N6) | |
| (37-7497 | Type 7497 Integrated Circuit | (For -01 PCB assy. only: F8, H8, J8, K8) |
37-7805 +5V Voltage Regulator (VR3) 37-7812 +12V Voltage Regulator (VR1) 37-7815 + 15V Voltage Regulator (VR4) 37-7915 — 15V Voltage Regulator (VR2)
| 37-9316 | Type 9316 Integrated Circuit | (C3, C4, B6, C6, P7) |
38-MV5053 Type MV5053 Light-Emitting Diode (CR2)
| 41-3003 | 100 uH, + 10%, Hot-Molded Plastic Fixed R.F. Choke | (L1-4) |
62-001 SPST Momentary Pushbutton Switch (A5)
| 66-114P1T | 4-Station Single-Throw, Dual-Inline-Package Bit Switch | (M12) |
| 66-118P1T | 8-Station Single-Throw, Dual-Inline-Package Bit Switch | (R5, 18) |
79-42C24 24-Contact Medium-Insertion-Force Integrated Circuit Socket (D1, E/F1, H1, J1, N/P2, R2) 79-42C40 40-Contact Medium-Insertion-Force Integrated Circuit Socket (C2, M7/8) 81-4302 Nylon Snap-In Fastener (VR1-4, Q8-10)
| 90-102 | 12.096 MHz, + .005%, Crystai | (¥1) |
90-6013 Microprocessor (C2) 90-7033 Random-Access Memory (L1, M1, M3, N3, P3, R3) 020670-01 Test Point 03460201 Programmable Read-Only Memory (C8)
| 035904-01 | Type 828131 Integrated Circuit | (For -02 PCB assy. only: F7, H7, J7) |
| 035905-01 | Type 828131 Integrated Circuit | (For -02 PCB assy. only: E7) |
| 03643001 | Read-Only Memory | (D1) |
03643101 Read-Only Memory (E/F1)
| 036432-01 | Read-Only Memory | (H1) |
| 036433-02 | Read-Only Memory | (J1) |
Asteroids Deluxe ™/Cabaret
Figure 19 Asteroids Deluxe™ Game PCB Assembly, continued Parts List
Part No. Description (Reference Designations and Locations in Bold)
036799-01 Read-Only Memory (N/P2) 036800-01 Read-Only Memory (R2) 100015-103 -1 uf Ceramic-Disc 25V Radial-Lead Capacitor (C45, 80, 82) 110000-102 1K Ohm, +5%, %W Resistor (R27, 29, 45, 47, 72) 110000-103 10K Ohm, +5%, %W Resistor (R9-26, 28, 33, 34, 39, 48-55, 67, 73, 74, 81-84, 86, 90, 92, 98, 102, 114, 117, 120, 121, 156, 159) 110000-104 100K Ohm, +5%, %4W Resistor (R69, 80, 146) 110000-121 120 Ohm, +5%, %W Resistor (R93, 126) 110000-122 1.2K Ohm, +5%, %4W Resistor (R36, 160) 110000-123 12K Ohm, +5%, %4W Resistor (R44) 110000-151 150 Ohm, +5%, %4W Resistor (R68) 110000-183 18K Ohm, +5%, %W Resistor (R75, 143) 110000-222 2.2K Ohm, +5%, %W Resistor (R37, 46, 76, 116, 125, 145, 154) 110000-223 22K Ohm, +5%, %W Resistor (R1-8, 35, 42) 110000-270 27 Ohm, +5%, %4W Resistor (R71) 110000-271 270 Ohm, +5%, ¥W Resistor (R88, 142) 110000-274 270K Ohm, +5%, %W Resistor (R157) 110000-331 330 Ohm, +5%, YW Resistor (R30, 31, 115) 110000-332 3.3K Ohm, +5%, %W Resistor (R78, 147, 158) 110000-392 3.9K Ohm, +5%, %W Resistor (R40, 94-96, 148, 151) 110000-477 470 Ohm, +5%, YW Resistor (R32, 97, 99-101, 103-111, 127-139) 110000-472 4.7K Ohm, +5%, YW Resistor (R38, 79, 85, 89, 91, 112, 123, 144. Also, for 02 PCB assy. only: R56-66) 110000-473 47K Ohm, +5%, %4W Resistor (R43, 87, 155) 110000-562 5.6K Ohm, +5%, %4W Resistor (R41) 110000-563 56K Ohm, +5%, YW Resistor (R77, 113) 110000-680 68 Ohm, +5%, %4W Resistor (R70) 110000-682 6.8K Ohm, +5%, %W Resistor (R150, 153, 161) 110000-822 8.2K Ohm, + 5%, YW Resistor (R119, 124) 137108-001 Operational Amplifier Integrated Circuit (B/C12, E12) 137158-002 Type AM6012ADC Digital-to-Analog Converter (A/B11, C/D11) Acceptable substitute is part no. 37-AD561J (B11, D11) 137161-001 Electrically Alterable Read-Only Memory (N9) oa. \
NOTICE TO ALL. PERSONS RECEIVING THIS DRAWING
nor any to reproduce this drawing or any
thereof. Except for manufacture by vendors of Atarl, nee
and fot manufacture under the corporation's written
ficense, no right to reproduce this drawi
the subject matter thereof unless by wr
with or written permission from the corpor
+10.3V00 UNA 3.300
is
Toa2oo20 a5 ce @ND
A A034485-03 Figure 20 Regulator/Audio | PCB Assembly
Asteroids Deluxe “Cabaret
Figure 20 Regulator/Audio | PCB Assembly Parts List
Part No. Description (Reference Designations and Locations in Bold)
| 12-52P7 | 2.7 Ohm, + 5%, 1W Resistor | (R5) |
19-100P1015 -1. Ohm, + 3%, 7W Wirewound Resistor (R24)
| 19-315102 | 1K Ohm Vertical PCB-Mounting Cermet Trimpot | (R8) |
24-250108 1000 uf Aluminum Electrolytic Fixed Axial-Lead 25V Capacitor (C13) 24-250477 470 uf Aluminum Electrolytic Fixed Axial-Lead 25V Capacitor (C1, 4, 12) 24-350338 3300 uf Aluminum Electrolytic Fixed Axial-Lead 35V Capacitor (C9, 10)
| 29-088 | -1 uf Ceramic-Disc 25V Radial-Lead Capacitor | (C3, C11) |
| 314-1N4002 | 100V 1-Amp. Silicon Rectifier 1N4002 Diode | (CR1, 4) |
33-TIP32 PNP Power Transistor, Type TIP32 (Q2) 34-2N3055 NPN Silicon Transistor, Type 2N3055 (Q3)
| 37-LM305 | 5V Linear Voltage Regulator | (Q1) |
75-F60405 #632 x 1% Inch Binder-Head Nylon Screw 78-16008 Thermally Conductive Compound for the 2N3055 78-16014 Thermally Conductive Compound for the TIP32 79-58306 6-Position Connector Receptacle (J6) 79-58308 9-Position Connector Receptacle (J7) 79-58354 4-Position Square Connector Receptacle (J8) 020670-01 Test Point 034531-01 Heat Sink
| 100015-103 | 01 ui Ceramic-Disc 25V Radial-Lead Capacitor | (C5, 14) |
| 110000010 | 1 Ohm, + 5%, %W Resistor | (R10, 19) |
110000-100 10 Ohm, + 5%, %4W Resistor (R11, 20, 25, 26) 110000-101 100 Ohm, + 5%, %4W Resistor (R4, 12, 22)
| 110000-102 | 1K Ohm, + 5%, %W Resistor | (R15, 16) |
110000-103 10K Ohm, + 5%, YW Resistor (R13, 14) 110000-271 270 Ohm, + 5%, VsW Resistor (R1)
| 110000-330 | 33 Ohm, + 5%, Y4W Resistor | (R3) |
110000-392 3.9K Ohm, + 5%, %4W Resistor (R6)
| 110000-752 | 7.5K Ohm, +5%, Y4W Resistor | (R7) |
110001-221 220 Ohm, + 5%, %eW Resistor (R9, 21)
| 122002-102 | .001 uf Ceramic-Disc 25V Radial-Lead Capacitor | (C2, 7, 16) |
| 122004-224 | .22 uf Ceramic-Disc 25V Radial-Lead Capacitor | (C6, 8, 15, 17) |
| 137151-002 | 8W Linear Audio Amplifier Integrated Circuit | (Q5, 7) |
79-4411001
| 03446202 | (Fuse Post) | masaaot | 03630401 |
(Chassis) 46-2017002 (Cover) 462014001 (Label) (Fuse) 79-3206 J (Fuse Block) LY A035888-01 or 02 REY (ntl) or A03567. E or -02 (int'l. only) oO A035891-01 (hi iat sonnet Tes] (Fuse Harness) 78-2708 TOP VIEW AAG (Hole Bushing) cnr .. not used)
NOTICE TO ALL PERSONS RECEIVING THIS DRAWING CONFIDENTIAL: Reproduction forbidden without the 7050: specific written permission of Atari, inc., Sunnyvale, CA, 78-705018C This drawing 1s only conditionally’ issued, and neither (Capac. Bracket) 28-053 receipt nor possession therect conters or transfers any fight in, or license to use, the subject matter of the draw: (Capacitor) ing or any design or technical infermation shown thereon, y nor any right to reproduce this drawing or any part thereof, Except for manutacture by vendors of Atari, {nc., and for manutacture under the co:poration’s written license, no right to reproduce this drawing is granted or the subject matter ‘hereof unless by written agreement with or written permission from the corporation.
BOTTOM VIEW
3A-MDA3501 (Rectifier)
A035890-01 (Int'l)
| 403463001 | or A036355-01 (U.S.) | A034629-01 | 79-15021001 |
| (RFI Filter) | (Pwr. Harness) | (AC Harness) | (Terrn'| Block) |
Figure 21. Power Supply Assemblies for X-Y Games A035892-01 (International) A ! A036353-01 (U.S) A
Asteroids Deluxe ™/Cabaret
Figure 21 Power Supply Assemblies for X-Y Games Parts List
Part No. Description (Reference Designations and Locations in Bold)
A034629-01 A.C, Harness Assembly A034630-01 RFI Filter Assembly (FL1) A035674-01 Voltage Plug Assembly (set of four plugs—for international power supply only) A035888-01 or -02 Transformer Assembly—international only (T1) A035890-01 Power Harness Assembly (international only} A035891-01 Fuse Harness Assembly A036354-01 or -02 Transformer Assembly—U.S. only (T1) A036355-01 Power Harness Assembly (U.S. only) 29-053 26,000 uf 15 VDC Electrolytic Capacitor (C1) 3A-MDA3501 Bridge Rectifier, Type MDA 3501 (CR1) 46-2014001 4-Amp. 125 V 3AG Slow-Blow Glass Cartridge-Type Fuse (F4, F5, F6) 46-2017002 7-Amp. 250 V 3AG Slow-Blow Glass Cartridge-Type Fuse (F1) 46-302202 20-Amp, 250 V 3AB Slow-Blow Ceramic Cartridge-Type Fuse (F3) 78-2708 Nylon Type 6/6 Hole Bushing with 5/8-Inch Inside Diameter x 55/64-Inch Outside Diameter x Y%-Inch Thick 78-70501SC 2-Inch Diameter Capacitor Mounting Bracket 79-15021001 2-Circuit Single-Row Terminal Block 79-3206 5-Position 3AG Fuse Block with %-Inch Quick-Disconnect Terminals 79-4411001 Panel-Mounting Non-Indicating 3AG Cartridge-Type Fuse Post 03448202 Power Supply Chassis 034544-01 Fuse Block Cover 036304-01 Label for Fuse Values
NOTICE TO ALL PERSONS RECEIVING THIS DRAWING 99-10103 CONFIDENTIAL: Reproduction forbidden without the inner Pri specific written permission of Atari, Inc., Sunnyvale, CA. (Inner Pri. This. drawing. Is" only conditionally’ Issued and ‘neimer wiLevers) receipt nor possession thereot confers or ‘transters any 75-9488 right in, or license to use, the subject matter of the drawing 99-10096 (Hex Nut) 99-10095 Of any design or technical Information shown thereon, nor (Faste any right to reproduce this drawing or any part thereof, Ex- astener) (Gelf-Test Sw.) cept for manufacture by vendors of Atari, Inc. and for manufacture under the corporation's written license, no 99-1052 (Lever) a
7 99-10073 a (Decal) Tight to reproduce this drawing Is granted or the Subject ‘matter thereof unless by written agreement with or written permission from the corporation. 99-10071 (Slam Sw.)
75-1408S. (Screw) NL .
75-9445, 99-10096 (Hex Nut) (Fastener)
99-1063 (Coin Chute) Part of 99-1095,
99-10097 99-10101 (Insul.) 99-10040 Chute) : (Coin Chute) (Coin Inlet
70-11-47 (Lamp),
99-10080 (Lamp Socket)
72-9406S. (Screw)
99-10104 (Bar Retnr.)
(Coin Counter)
99-1081 (Key Holder) 71-12Xxxxx (Coin Mech) 75-9448 (arte As5y) 65-441 (ex Nut) rkt. Assy.’ 4 COIN RETURN 89-1066 (Coin Sw.) anita CHUTE (Return Box) 99-1047 99-1068 . (Coin Chutey >) 9930075 thru (Lockt. Coil) (Sw. Wie) 31-1N4002—Part
| 99-1042 thru | a | of 99-1047 | |
| 99-10045 | 99-10008 | (Diode) | |
| (Coin Sw. Assy.) | (Retainer) | 7514128 | 99-10082 |
(Screw) (Cover) Figure 22 American-Made Coin Door 71-10xxxx D
99-10055 thru 99-10058 (Button Cover)
99-10012 thru 99-0022, ‘and 99-10107 99-1070, 99-1083 99-1074 (Button Assy.) thru 99-10092, (Lock) and 99-10108 72-JA1405B (Price Plate) (Screw) 99-10062 99-1054 (Button) (Btn. Housing) 99-10009 or 99-10010 72-HA1404C {Door) 75.9188 (Screw) (Hex Nut)
99-10094 (Insul.)
Part of 99-10074
99-10049 (Locking Arm)
75-5520B (Bott)
99-10061 NOTICE TO ALL PERSONS RECEIVING THIS (Bezel) CONFIDENTIAL: Reproduction forbidden without the specific written permission of Atari, Inc., Sunnyvale, CA. This drawing is only conditionally ‘issued, and neither receipt nor possession thereot 99-10066 confers or transfers any right in,or license to use, C the subject matter of the drawing or any design or (Cover) technical information shown thereon, nor any fight to reproduce this drawing or any part there Except for manufacture by vendors of Atari, In and for manufacture under the corporation's wi ten license, no right to reproduce this drawing is 75.915 Granted or the subject matter thereo! unless by (Lee Nut) written agreement with or written permission from {he corporation. 72 JAYA08B crew) 99-10048 (Harness—not shown for clarity)
99-1051 (Frame)
| 71-102201 — U.S. 250/25¢ Coin Door | 71-102206 — German 1 DM/S DM Coin Door | 71-102211 — Australian 209/20% Coin Door |
| 71-103202 — U.S. 25¢/25¢/25¢ Coin Door | 71-102207 — Belgian § FriS Fr Coin Door | 71-102212 — Italian 100 L/100 L Coin Door |
| 74-103203 — U.S. 25¢/25¢/$1 Coin Door | 71-102208 — Swiss 1 Frit Fr Coin Door | 74-102213 — U.S. 509/506 (2 x 25¢) Coin Door |
| 71-102204 — German 2 DM/1 DM Coin Door | ——_71-102209 — Japanese 100Y/100Y Coin Door | 74-103214 — U.S. 506/509/50¢ Coin Door |
| 71-103205 — German 1/2/5 DM Coin Door | 71102210 — British 10 P/10 P Coin Door | 71-103215 — US. 50°/50%$1 Coin Door |
Figure 22 American-Made Coin Door 71-1 0XXXXx D
Figure 22 American-Made Coin Door, continued Parts List
Part No. Description
31-1N4002 100V Silicon Rectifier 1N4002 Diode 65-4416 General-Usage Low-Force Miniature Switch 70-11-47 Miniature Bayonet-Base Incandescent Lamp, Type #47 71-1201ADU U.S. $1.00 Coin Mechanism 71-1201FCH Swiss 1 Fr Coin Mechanism 71-1201MG German 1 DM Coin Mechanism 71-4202MG German 2 DM Coin Mechanism 71-1205FB Belgian 5 Fr Coin Mechanism 71-1205MG German 5 DM Coin Mechanism 71-1210PE U.K. 10 P Coin Mechanism 71-1220CA Australian 20¢ Coin Mechanism 71-1225CU. U.S. 25¢ Coin Mechanism 71-12100LI Italian 100 Lire Coin Mechanism 71-12100YU Japanese Y100 Coin Mechanism 72-HA1404C, #4 ¥a-Inch Slotted Pan-Head Thread-Rolling Tri-Fluted “Taptite” Cadmium-Plated Screw 72-JA1405B #4 x 5/16-Inch Slotted Pan-Head Thread-Rolling Tri-Fluted “Plastite” Black Screw 72-9406S #4-40 x 3/8-Inch Slotted Truss-Head Steel Machine Screw 72-9603S #6-32 x 3/16-inch Slotted Truss-Head Steel Machine Screw 75-9158 #¥4-20 Standard-Pattern Cadmium-Plated Steel Hex Nut 75-9188 #8-32 Standard-Pattern Cadmium-Plated Steel Hex Nut 75-9448 #4-40 Polymer Self-Locking Steel Hex Nut 75-948S #8-32 Polymer Self-Locking Steel Hex Nut 75-1408S #4-40 x ¥2-Inch Slotted Pan-Head Steel Machine Screw 75-1412S #4-40 x %4-Inch Slotted Pan-Head Stee! Machine Screw 75-5520B #1%4-20 x 1%-Inch Round-Head Square-Neck Steel Bolt with Black Finish 99-10008 Switch Wire Retainer 99-10009 2-Mech Coin Door Only 99-10010 3-Mech Coin Door Only 99-10012 U.S. 25¢ Coin Return Button Assembly 99-10013 U.S. $1.00 Coin Return Button Assembly 99-10014 German 1 DM Coin Return Button Assembly 99-10015 German 2 DM Coin Return Button Assembly 99-10016 German 5 DM Coin Return Button Assembly 99-10017 Belgian 5 Fr Coin Return Button Assembly 99-10018 Swiss 1 Fr Coin Return Button Assembly 99-10019 Japanese Y100 Coin Return Button Assembly 99-10020 U.K. 10 P Coin Return Button Assembly 99-10021 Australian 20¢ Coin Return Button Assembly 99-10022 Italian 100 Lire Coin Return Button Assembly 99-10040 Coin Inlet Chute Assembly 99-10041 Coin Counter Assembly 99-10042 Coin Switch Assembly for U.S. 25¢ and Belgian 5 Fr Coins = (siiver wire) 99-10043 Coin Switch Assembly for German 1 DM, Swiss 1 Fr, and Japanese Y100 Coins (black wire) 99-10044 Coin Switch Assembly for U.S. $1.00, German 2 DM, and Italian 100 Lire Coins (go/d wire) 99-10045 Coin Switch Assembly for German 5 DM, U.K. 10 P, and Australian 20¢ Coins (green wire)
Figure 22 American-Made Coin Door, continued Parts List
Part No. Description
99-10047 Lockout Coil Assembly 99-10048. Coin Door Harness Assembly 99-10049 Locking Arm Assembly 99-10051 Coin Door Frame 99-10052 Coin Return Lever 99-10054 Coin Button Housing 99-10055 Coin Return Button Cover for Japanese 100Y Coin 99-10056 Coin Return Button Cover for German 1 DM and Swiss 1 Fr Coins 99-10057 Coin Return Button Cover for U.S. 25¢ and Belgian 5 Fr Coins 99-10058 Coin Return Button Cover for U.S. $1.00, German 2 DM, and Italian 100 Lire Coins 99-10059 Coin Return Button Cover for German 5 DM, U.K. 10 P, and Australian 20¢ Coins 99-10061 Coin Return Bezel 99-10062 Coin Return Button 99-10063. Right Half of Coin Inlet Chute 99-10065 Coin Return Box 99-10066 Coin Return Cover 99-10068 Coin Chute 99-10070 U.S. 25¢ Price Plate 99-10071 Slam Switch Assembly 99-10073 Test Switch Decal 99-10074 Lock Assembly 99-10075 Black Switch Wire for German 1 DM, Swiss 1 Fr and Japanese 100Y Coins 99-10076 Silver Switch Wire for U.S. 25¢ and Belgian 5 Fr Coins 99-10077 Gold Switch Wire for U.S. $1.00, German 2 DM and Italian 100 Lire Coins 99-10078 Green Switch Wire for German 5 DM, U.K. 10 P and Australian 20¢ Coins 99-10080 Miniature Bayonet-Base Lamp Socket 99-10081 Wire Key Holder 99-10082 Switch Cover 99-10083 U.S. $1.00 Price Plate 99-10084 German 1 DM Price Plate 99-10085 German 2 DM Price Plate 99-10086 German 5 DM Price Plate 99-10087 Belgian 5 Fr Price Plate 99-10088 Swiss 1 Fr Price Plate 99-10089 Japanese Y100 Price Plate 99-10090 U.K. 10 P Price Plate 99-10091 Australian 20¢ Price Plate 99-10092 Italian 100 Lire Price Plate 99-10094 Fish Paper Insulation 99-10095 Toggle Switch 99-10096 “U"-Type Fastener 99-10097 Fish Paper Insulation 99-10101 Left Half of Coin Inlet Chute 99-10102 Switch and Lockout Coil Bracket Sub-Assembly 99-10103 Inner Panel with Levers Sub-Assembly 99-10104 Anti-Penny-Flip Bar Retainer 99-10105, Anti-Penny-Flip Bar 99-10107 U.S. 50¢ Coin Return Button Assembly (for two quarters) 99-10108 U.S. 50¢ Price Plate (for two quarters)
A
Asteroids Deluxe ™/Cabaret
99-15038 (Bezel for Button) NOTICE TO ALL PERSONS RECEIVING THIS DRAWING CONFIDENTIAL: Reproduction forbidden without the specitic written permission of Atari, Inc., Sunnyvale, CA. ‘This drawing Is only conditionally’ issued, and neither receipt nor possession thereof conters or transfers any fight in, oF license to use, the subject matter of the draw: ing or any design or technical information shown thereon, Ror any right to reproduce this drawing or any pari 99-15001 thru 99-15012 thereof. Except for manutacture by vendors of Atari, Inc., (Ret. Button) and lor manufacture unger the corporation's written license, no right to reproduce this drawing is granted or the subject matter thereof uniess by written agreement with of written permission from the corporation.
99-15052 (Spring for Button)
99-15051 (Lamp Holder)
99-15040 99-15026 (Lever) (Coin Inlet) J iy a n
<a (Bezel for Cover) UX 99- \ (Cover) 99-15056 (Screw for Bezel)
PART OF 99-15041 v 99-15054 99-15055 \ Is (Pivot for Lever) (Retng. Screw) “> (Lockout Coil) 99-15053 eS om (Lockt. Coil Spring) < oN 99-15027 (Coin Ret. Box)
99-15037 (Sw. Adjuster)
99-15029 (Bracket)
(Switch)
Figure 23 _British-Made Coin Door 171000-xxx A 99-15039
NOTICE TO ALL PERSONS RECEIVING THIS DRAWING CONFIDENTIAL: Reproduction forbidden without the Specific written permission of Atari, Inc., Sunnyvale, CA. This drawing is only conditionally’ issued, and neither receipt nor possession thereo! confers or transfers any ‘ight in, oF license to use, the subject matter of the drawing or any design or technical information shown thereon, nor any right to reproduce this drawing or any pari thereof. Except for manufacture by vendors of Atari, Inc., and for manufacture under the corporation's written license, no right to reproduce this drawing is granted or ‘the subject matter thereof unless by written agreement with or written permission from the corporation
171001-001 — British 10 P/10 P Coin Door =" —-171000-006 — German 2 DMI5 DM Coin Door 171000-002 — British 10 P/50 P Coin Door 171000-007 — Belgian 5 Fr/5 Fr Coin Door 171000-003 — British 20 P/50 P Coin Door 171000-008 — French 1 Fr/1 Fr Coin Door 171000-004 — German 1 DM/1 DM Coin Door 171000-009 — French 2 Fr/1 Fr Coin Door 171000-005 — German 2 DM/1 DM Coin Door —_171000-010 — Swedish 1 Kr/1 Kr Coin Door 171000-011 — Hong Kong $1/$1 Coin Door 171000-012 — Canadian 25%/25¢ Coin Door 171000-013 — U.S. 25¢/25¢ Coin Door 171000-014 — Spanish 25 Pts/25 Pts Coin Door 171000-015 — Swiss 1 Fr/1 Fr Coin Door
Figure 23 British-Made Coin Door 171000-xxx
Asteroids Deluxe ™/Cabaret
Figure 23 British-Made Coin Door, continued Parts List
Part No. Description
99-15001 Coin Return Button with U.S. 25¢ Price Plate 99-15002 Coin Return Button with U.S. $1 Price Plate 99-15003 Coin Return Button with German 1 DM Price Plate 99-15004 Coin Return Button with German 2 DM Price Plate 99-15005 Coin Return Button with German 5 DM Price Plate 99-15006 Coin Return Button with Belgian 5 Fr Price Plate 99-15007 Coin Return Button with French 1 Fr Price Plate 99-15008 Coin Return Button with Japanese 100 Yen Price Plate 99-15009 Coin Return Button with British 10 Pence Price Plate 99-15010 Coin Return Button with Australian 20¢ Price Plate 99-15011 Coin Return Button with Italian 100 Lire Price Plate 99-15012 Coin Return Button with U.S. 50¢ (2 x 25¢) Price Plate 99-15025 Left Half of Coin Inlet 99-15026 Right Half of Coin Inlet 99-15027 Side Plate of Coin Return Box 99-15028 Base Plate of Coin Return Box 99-15029 Switch Bracket 99-15030 Flap for Lockout Coil (U.S. 25%) 99-15036 Coin Return Cover 99-15037 Switch Adjuster 99-15038 Bezel for Coin Return Button 99-15039 Bezel for Coin Return Cover 99-15040 Coin Return Lever 99-15041 Lockout Coil 99-15042 Coin Switch for U.S. 25¢ 99-15051 Lamp Holder 99-15052 Spring for Coin Return Button 99-15053 Spring for Lockout Coil 99-15054 Pivot for Coin Return Lever 99-15055, Retaining Screw 99-15056 Screw for Both Bezels 99-15060 Switch Cover
BUSINESS REPLY MAIL
FIRSTCLASS PERMIT NO. 1004 SUNNYVALE. CA
POSTAGE WILL BE PAID BY ADDRESSEE
Atari, Inc. Attn.: Field Service/Coin-Op Division P. O. Box 427 Sunnyvale, California 94086
Second fold No Postage Necessary if mailed in the United States
eBpe siy) ade, SOs aus] Siyy Buoye ynp
se Leg =
Asteroids Deluxe™ Cabaret
YOUR COMMENTS, PLEASE! ist printing
Your comments will assist Atari in improving the usefulness of our publications. They are an important part of preparing for revisions of manuals and parts catalogs. No postage stamp is necessary if mailed in the U.S.A.
If you have any technical questions about certain Atari or Kee Games products, or are requesting additional publications, we will immediately forward your note to the appropriate person.
Page: Comments:
Fill in if you wish a reply
Name.
Firm U Distributor
Address OC Operator
City State _ Zip C Other.
Area Code Phone
- wae \,
Seller warrants that its printed circuit boards and parts thereon are free from defects in material and workmanship under normal use and service for a period of ninety (90) days from date of shipment. Seller warrants that its television monitors (in games supplied with monitors) are free from defects in material and workmanship under normal use and service for a period of thirty
- days from date of shipment. None of the Seller's other products or parts thereof are warranted. :
If the products described in this manual fail to contorm to this warranty, Sellers’ sole liability shall be, at its option, to repair, replace, or credit Buyer's account for such products which are returned to Seller during said warranty period, provided:
- Seller is promptly notified in writing upon discovery by Buyer that said products are defective;
- Such products are returned prepaid to Sellers’ plant; and
- Seller's examination of said products discloses to Seller's satisfaction that such alleged defects existed and were not caused by accident, misuse, neglect, alteration, improper repair, installation or improper testing.
In no event shall Seller be liable for loss of profits, loss of use, incidental or consequential damages. P Except for any express warranty set forth in a written contract between Seller and Buyer which contract supersedes the terms of this order, this warranty is expressed in lieu of all other warranties expressed or implied, including the implied warranties of merchantability and fitness for a particular purpose, and of all other obligations or liabilities on the Seller's part, and it neither assumes nor authorizes any other person to assume for the Seller any other liabilities in connection with the sale of products under this order.
The use of any non-Atari parts may void your warranty, according to the terms of the warranty. The use of any non-Atari parts may also adversely affect the safety of your. game and cause injury to yourself and others. Be very cautious in using non-Atari-supplied components with our games, in order to insure your safety. .
Atari distributors are independent, being privately owned and operated. In their judgment they may sell parts or accessories other than Atari parts or accessories. Atari cannot be responsible for the quality, suitability or safety of any non-Atari part or any modification including labor which is performed by such distributor. ‘
This document is and contains confidential trade secret information of Atari, Inc.
This document is loaned under confidential custody for the sole purpose of operation, maintenance or repair of Atari equipment and may not be used by or disclosed to any person for any other purpose whatever, and remains the property of Atari, Inc.
Neither it nor the information it contains may be reproduced, used, or disclosed to persons not having a need to know consistent with the purpose of the foan, without written consent of Atari, Inc.
ATARI
ATARI INC 1265 BORREGAS AVENUE P.O. BOX 427 SUNNYVALE, CALIFORNIA 94086 408/745-2000 ¢ TELEX 35-7488 (een eo,