CATHODE RAY TOMES

Batman TM-364 1st Printing

Batman (Atari Games, 1991) · Technical Manual · 55 pages · 55 sections · original scan

Page 1

ATARI

Kit Installation Instructions

heirs

Page 2

Peele ele ele elelel ell elle fell elrel el ele feted ped ed el pel rel ed

Seller warrants that its printed-circuit boards and parts thereon are free from defects in material and workmanship under normal use and service for a period of ninety (90) days from date of shipment. Seller warrants that its video displays and laser-video disc players (in games supplied with displays and video-disc players) are free from defects in material and workmanship under normal use and service for a period of thirty (30) days from date of shipment. None of the Seller's other products or parts thereof are warranted. If the products described in this manual fail to conform to this warranty, Seller’s sole liability shall be, at its option, to repair, replace, or credit Buyer’s account for such products which are returned to Seller during said warranty period, provided:

  • Seller is promptly notified in writing upon discovery by Buyer that said products are defective;
  • Such products are returned prepaid to Seller's plant; and (©) Seller’s examination of said products discloses to Seller's satisfaction that such alleged defects existed and were not caused by accident, misuse, neglect, alteration, improper repair, installation, or improper testing. In no event shall Seller be liable for loss of profits, loss of use, incidental or consequential damages.

Except for any express warranty set forth in a written contract between Seller and Buyer which contract supersedes the terms herein, this warranty is expressed in lieu of all other warranties expressed or implied, including the implied warranties of merchantability and fitness for a particular purpose, and of all other obligations or liabilities on the Seller's part, and it neither assumes nor authorizes any other person to assume for the Seller any other liabilities in connection with the sale of products by Seller.

The use of any non-Atari parts may void your warranty, according to the terms of the warranty. The use of any non-Atari parts may also adversely affect the safety of your game and cause injury to you and others. Be very cautious in using non-Atari-supplied components with our games, in order to ensure your safety. Atari distributors are independent, being privately owned and operated. In their judgment they may sell parts or accessories other than Atari parts or accessories. Atari Games Corporation cannot be responsible for the quality, suitability or safety of any non-Atari part or any modification including labor which is performed by such distributor.

Page 3

Universal conversion kit for upright games

BATMAN and all related characters, slogans, vehicles, accessories and indicia are trademarks of OC Comics Inc. © 1991. All Rights Reserved,

Page 4

Copyright © 1991 by Atari Games Corporation. All rights reserved. No part of this publication may be reproduced by any mechanical, photographic or electronic process, or in the form of a phonographic recording, nor may it be stored in a retrieval system,- transmitted, or otherwise copied for public or private use, without permission from the publisher. The game play, all graphic designs, this technical manual, its accompanying schematic diagrams, and the display manual are protected by the U.S. Copyright Act of 1976. This Act provides for substantial penalties for violating federal copyright laws. Courts can impound infringing articles while legal action is pending. If infringers are convicted, courts can order destruction of the infringing articles. In addition, the Act provides for payment of statutory damages of up to $50,000 per infringing transaction in certain cases. Infringers may also have to pay costs and attorneys’ fees and face an imprisonment of up to five years as well as fines of up to $250,000 in the case of individuals and up to $500,000 in the case of corporations. Atari Games Corporation will aggressively enforce its copyrights against infringers. We will use all legal means to immediately halt any manufacture, distribution, or operation of a copy of video games made by us, Anyone who purchases such copies risks forfeiting such a game.

Published by: Atari Games Corporation 675 Sycamore Drive P.O. Box 361110 Milpitas, California 95036 Printed in the U.S.A. 3/91 Produced by the Atari Games Technical Publications Department. Writing and Editing: Andrea Dencker Illustration and Design: Mary Ohanessian Sumner NOTICE RE.

NON-ATARI

PARTS

WARNING Use of non-Atari parts or modifications of any Atari game circuitry may adversely affect the safety of your game, and may cause injury to you and your players.

You may void the game warranty (printed on the inside back cover of this manual) if you do any of the following: @ Substitute non-Atari parts in the game. M@ Modify or alter any circuits in the game by using kits or parts not supplied by Atari Games Corporation.

NOTE This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of Federal Communications Commission (FCC) Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area or modification to this equipment is likely to cause interference, in which case the user, at his own expense, will be required to take whatever measures may be required to correct the interference. If you suspect interference from an Atari game at your location, check the following: ™@ All ground wires in the game are properly connected as shown in the game wiring diagram. ™@ The power cord is properly plugged into a grounded three-wire outlet. M@ The game printed-circuit boards (PCBs) are properly installed with all screws in place and tightened. If you are still unable to solve the interference problem, please contact Customer Service at Atari Games Corporation. See the inside front cover of this manual for service in your area.
Page 5

SUMMARY

The following safety precautions apply to all game operators and service personnel. Specific warnings and cautions will be found in this manual whenever they apply.

WARNING Properly Ground the Game. Players may receive an electrical shock if this game is not properly grounded! To avoid electrical shock, do not plug in the game until it has been inspected and properly grounded. This game should only be plugged into a grounded threewire outlet. If you have only a two-wire outlet, we recommend you hire a licensed electrician to install a three-wire grounded outlet. If the control panel is not properly grounded, players may receive an electrical shock! After servicing any part on the control panel, check that the grounding wire is firmly secured to the inside of the control panel. After you have checked this, lock up the game. AC Power Connection. Before you plug in the game, be sure that the game's power supply can accept the AC line voltage in your location. The line voltage requirements are listed in the first chapter of this manual. Disconnect Power During Repairs. To avoid electrical shock, disconnect the game from the AC power before removing or repairing any part of the game. If you remove or repair the video display, be very careful to avoid electrical shock. High voltages continue to exist even after power is disconnected in the display circuitry and the cathode-ray tube (CRT). Do not touch the internal parts of the display with your hands or with metal objects! Always discharge the high voltage from the CRT before servicing it. Do this after you disconnect it from the power source. First, attach one end of a large, well-insulated, 18-gauge jumper wire to ground. Then momentarily touch the free end of the grounded jumper wire to the CRT anode by sliding the wire under the anode cap. Wait two minutes and do this again. Use Only Atari Parts. To maintain the safety of your Atari game, use only Atari parts when you repair it. Using non-Atari parts or modifying the game circuitry may be dangerous, and could injure you and your players. Handle the CRT With Care. If you drop the CRT and it breaks, it may implode! Shattered glass from the implosion can fly six feet or more. Use the Proper Fuses. To avoid electrical shock, use replacement fuses which are specified in the parts list for this game. Replacement fuses must match those replaced in fuse type, voltage rating, and current rating. In addition, the fuse cover must be in place during game operation.
CAUTION Properly Attach All Connectors. Make sure that the connectors on each printed circuit board (PCB) are properly plugged in. The connectors are keyed to fit only one way. If they do not slip on easily, do not force them. If you reverse a connector, it may damage your game and void your warranty. Ensure the Proper AC Line Frequency. Video games manufactured for operation on 60 Hz line power (used in the United States) must not be operated in countries with 50 Hz line power (used in Europe). If a 60 Hz machine operates on 50 Hz line power, the fluorescent line ballast transformer will overheat and cause a potential fire hazard. Check the product identification label on your machine for the line frequency required,

ABOUT NOTES, CAUTIONS, AND

WARNINGS In Atari publications, notes, cautions and warnings have the following meaning:

NOTE — A highlighted piece of information.
CAUTION — Equipment and/or parts can be damaged or destroyed if instructions are not followed. You will void the warranty on Atari printed-circuit boards, parts thereon, and video displays if equipment or parts are damaged or destroyed due to failure of following instructions.
WARNING — Players and/or technicians can be killed or injured if instructions are not followed.

iii

Page 6

CON

1 Set-Up How to Use This Manual .... Cabinet Equipment Requirements Tools Required... Inspecting the Kit . Preparing the Cabinet for the Kit Installation Assembling the Control Panel... Connecting the JAMMA Harness Installing the Batman Board Set Installing the Bezel, Decals, Labels, and ‘Attraction Assembly Setting the Coin and Game Options 1-8 Maximizing Earnings ........ 1-8 Game Play...... 1-8 2 Self-Test Introduction 2 Entering and Exiting the Self-Test. Select Test Menu Adjust Volume Statistics ... Game Options. Coin Options... Sound Board Tes Switch Test.........

Complete ROM Tes! Dual Playfield Test.. Motion Object Test Alphanumeric Test. Monitor Tests

3 Troubleshooting and Maintenance

Introduction .... Joystick Control... ROMs and RAMs Video Display Sync Problems 4 Parts Mlustrations

See the List of Illustrations that follows.

5 Schematic Diagrams

See the List of Illustrations that follows.

Statistics Sheet

Page 7

Figure 2-10 Motion Object Test Screen. ILLUSTRATIONS Figure 2-11 Color Test Screen......

  • - ‘ . Figure 2-12 Convergence Test Screen

Figure 1-1 Installed Kit Parts........ Figure 4-1 Parts for Batman Universal Kit Figure 1-2 Locations of Control Panel Holes Figure 4-2 Joystick Assembly to be Drilled... Figure 4-3 Batman Game PCB Assembly Figure 1-3. Control Panel Template Figure 4-4 JSA III PCB Assembly.......

Figure 2-1 Self-Test Menu Screen Figure 2-2 Statistics Screen....... Figure 2-3. Game Options Screen Figure 2-4 Coin Options Screen Figure 2-5 Sound Test Screen... Figure 2-6 Switch Test Screen Figure 2-7. RAM Test Menu... Figure 2-8 | Complete ROM Test Screen . Figure 2-9 Playfield Test Screen .. Figure 5-1 | Batman Game PCB Assembly Schematic Diagram Figure 5-2 JSA III PCB Assembly Schematic

TABLES

Table 1-1 Equipment Requirements .. Table 1-2 Contents of Batman Kit. Table 1-3 JAMMA Pin and Wire Connections

Table 2-1 Summary of All Self-Test Screens ........ 2-2 Table 2-2 Game Option Settings Table 2-3 Coin Option Settings .. : Table 2-4 When to Run the RAM Tests Table 2-5 Bad RAM Locations by Error Address...

Table 3-1 Troubleshooting Table... Table 3-2 Voltage Inputs and Test Points on the PCBs... Table 3-3 © What ROM Problems Look Like.

NOTE There is no longer a volume adjustment on the PCB. Volume is now adjusted in the Self-Test.
Page 8

vi

Page 9

» ;

nD ai p ide EMAC ] sta Ae . , ana GUD OD

i : Crsai ave On

hapte de ibe A

Ba < n i

: so desctibes game play Chap

Gntait est pro

. AGHO

he

d

peak

p

nainicnan oced O o

9 pte 2a e

pa p O

a e B

‘. g PCB and

Page 10

Installation:

WARNING To avoid electrical shock, unplug the cabinet while installing the kit. After installation, plug the game only into a grounded 3-wire outlet.

Cabinet Equipment Requirements

Table 1-1 lists the equipment required in the cabinet into which you are installing the Batman kit.

CAUTION Do not unplug or plug in the Batman game printed-circuit board (PCB) edge connector while the power is on. You could seriously damage the PCB.

Tools Required Drill with a 1/2-inch and 5/16-inch drill bits Phillips screwdriver Flat-blade screwdriver Socket wrench set and ratchet 1/4-20 hex wrench Wire cutters and strippers Table 1-1 Equipment Requirements Equipment Specification Video Display Color RGB monitor with negative composite sync Horizontal mounting Horizontal frequency: 15.750 KHz Vertical frequency: 60 Hz Video input: 1V to 3V peak-to-peak positive polarity Metal only 8Q, 10W +5 VDC or +12 VDC Control Panel

Speaker Coin Counter Power Cord Three-conductor with ground Power Supply. +5 VDC + 0.25V @ 3.0 amps +12 VDC @ 1.0 amp -5 VDC @ 1.0 amp (optional)

@ Straight edge ™@ Squeegee @ X-ACTO™ knife ™@ Insulated wire connectors (if you are installing a new JAMMA harness) Carbon paper Saber saw File Bandsaw Tape or glue

Table 1-2 Contents of Batman Kit

Part No.Description- Qty.- Part No.DescriptionQty.
72-6612S#6 x 3/4"-Long, Type AB, Pan-Head,171097-0018-Position Black Joystick with NO/NC
Cross-Recessed Screws4Gold Contacts1
75-5112B#10-24 x 3/4"-Long Black Carriage Bolts8175014-1040#10 Flat Washers8
177026-0040#10-24 Zinc Nut/Washer Assemblies8178032-002#10 Wire & Cable Tie1
178237-002,Yellow Button Assemblies4
038158-01Product Identification Label1
039450-01FCC Compliance Label1178265-001L-Style Nylon Standoffs4
047205-01Attraction Shield1178283-003“Start/Fire” Indicator Plates2
047209-01Control Panel Cover1178283-004“Jump” Indicator Plates2
A046501-01.JAMMA Harness Assy.1
049026-01Control Panel Decal1
049027-01Side Panel Decals2A049100-02Batman Board Set Assy., consisting of:
049028-01Attraction Panel Film1‘A048987-01Batman PCB Assy. (with EPROMs)1
049029-01Monitor Bezel with Graphics1A048974-01JSA Il PCB Assy. (with EPROMs)1
178278-612.75", 6-32 Nylon Standoffs4
141026-001.50"-Inside Diameter Ferrite Split Beads2177000-5366-32 Nylon Hex Nut4
160044-001Snap-Action Switches4049281-01Volume Control Label1

TM-364 Batman Kit Installation Instructions with control panel template) 1 Packaging materials are not listed.

1-2

Page 11

047205-01 Attcaction Shield] }049028-01

049029-01 Bezel With Graphics: Attraction Film Installation

items Not Shown:

‘4046501-01 AMMA Harness Assy. TM-364

Installation Instructions (038158-01 Product .D. Label (039450-01 FCC Compliance Label

Agar 100-02 [Batman Board Set Assy. 3265-001 178: Style Nylon Standott

‘Type-AB Screw (4 places) 7551128 10.26 x3/4" Cariage Bot (4 paces) 75014-1040 #0 Flat Washer (4 places) 110-28 NuwWasher Assy (4 paces) 178283-004 JUMP Incicater Plato

«720901 Control Panel Cover

040026-01, Control Panel Decal

t ‘STARTFIRE Indicator Pate 178247-002 ‘Yellow Button Assy. By (2plaoes) 160084-001 SSnap- Action Switch @ptaces)| —+71987-001 |

‘Peston Joystick Assy. 7551128 179283008 moze eauTak | JUMP Indicator Plate Carriage Bolt 176283.003, (4places) STARTIFIRE indicator Plato 75014-1080 1178237-002, HO Flat Washer Yellow Buton Assy (4 paces) (2places) 17026-0000 4160084.001 +#10-24 Nut Washer Assy. ‘Snap-Action Switch (4 paces) (2 places)

NOTE Your game cabinet may not ‘appear exactly as shown in this illustration. The picture shows the parts installed in a ‘ypical game cabinet.

Figure 1-1 Installed Kit Parts

Inspecting the Kit

Check to see that you have all the parts listed in the kit parts list in Table 1-2. If any part is missing or damaged, contact your distributor with the Batman kit serial number, part number, and description of the missing or damaged parts, and date received. Preparing the Cabinet for

the Kit Installation

WARNING

To avoid electrical shock, unplug the cabinet while installing the kit. After installation, plug the game only into a grounded 3-wire outlet.

Page 12

Installation Batman Universal Kit

Table 1-3 JAMMA Pin and Wire Connections

Wire

PinColorSignalInstructions

Component Side

1BNGNDConnect to the 5V RTN (GND) terminal on the power supply. However, if you have 12V.

RTN, connect ove of the BN wires at pin 1, 2, A, or B to the 12V RTN terminal.

2BNGNDSame as pin 1.
3R+5VConnect to the +5V terminal on the power supply. However, if your power supply has a

a terminal, connect one of the R wires at pin 3, 4, C, or D to +SENSE instead of

4R+5VSame as pin 3.
5OR-5VConnect to the -5V terminal of the power supply. If -5V is not available, connect to the

12V RTN or the 5V RTN (GND) or leave it unconnected. ae “you do not have (or use) SV, the maximum power to the speaker will be reduced vy half.

6Y+12VConnect to the +12V terminal of the power supply.

If your coin counter(s) require 12V, also connect to the + side-of the coin counter(s).

7 Key

8BU/WCOINCTR1Connect this wire to one side of the left 12V coin counter. Note: Do not use 24V counters.

If your counter requires 5V, connect a wire from the +5V terminal on the power supply. 9 Not used

10BNSPKR +Connect to the + terminal on the speaker. (This wire is part of a twisted pair.)

1 Not used.

12RREDAttach to the video display.
13,BUBLUEAttach to the video display.
14BKVIDEO GNDAttach to the video display.
15WwSELF-TESTUse this wire if you want an external self-test switch. However, the kit already has a self-

test switch on the JSA Audio III PCB, (if you connect an external self-test switch, turn off the switch on the PCB. Connect the wire to the N.O. terminal on the external self-test switch. Connect the common terminal of the switch to a BK/W wire [GND].)

16YLT COINConnect to the N.O. terminal of the left coin switch. Connect the common terminal of the

switch to a BK/W wire.

17W/BK | STRT1JAMMA start switch (optional)
18W/BNJOYST UPConnect to the N.O. terminal of the switch. Connect the common terminal of the switch

to one of the BK/W wires.

19W/RJOYST DNSame as pin 18.
20W/ORJOYSTLTSame as pin 18.
21WYJOYST RTSame as pin 18.i
22W/GN‘START/FIREConnect this wire to the N.O. terminals of the START/FIRE button switches. Connect the

common terminals of the switches to one of the BK/W wires.

23W/BUJUMP.Connect this wire to the N.O. terminals of the JUMP button switches. Connect the com-

mon terminals of the switches to one of the BK/W wires.

24w/vNot used
25W/GYNot used
26=2VNot used
27BK/WGNDConnect one of the BK/W wires at pin 27, 28, e, and f to the negative sense terminal of

the power supply (if it exists) and one to the common terminals of the coin switches. Connect two of these wires to the common terminals of the control switches on the control panel.

28BK/WGNDSame as pin 27.

1-4

Page 13

Batman Universal Kit Installation

Table 1-3 JAMMA Wire Connections, Continued

Wire

Pin Color Signal Instructions

Solder Side

ABNGNDConnect to the 5V RTN (GND) terminal on the power supply. However, if you have 12V.

RTN, connect one of the BN wires at pin 1, 2, A, or B to the 12V RTN terminal.

BBNGNDSame as pin A.
cR+5VConnect to the +5V terminal on the power supply. However, if your power supply has a

sien terminal, connect one of the R wires at pin 3, 4, C, or D to +SENSE instead of

DR+5VSame as pin C.
EOR-5VConnect to the -5V terminal of the power supply. If -SV is not available, connect to the

12V RTN or the 5V RTN (GND) or leave it unconnected. reat ‘you do not have (or use) —5V, the maximum power to the speaker will be reduced ny balf.

FY+12VConnect to the +12V terminal of the power supply.

H Key

JvwCOIN CTR2Connect this wire to one side of the right 12V coin counter. Clip R19 on the Batman game

PCB if you use a second coin counter. Note: Do not use 24V counters. If your counter requires 5V, connect a wire from the +5V terminal on the power supply. Also clip R19 on the game PCB. K Not used

LWwSPKR—Connect to the - terminal on the speaker. (This wire is one of a twisted pair.)

M Not used

NGNGREENAttach to the video display.
PBNCOMPSYNCAttach to the video display.
RGYService

s Not used

TORRT COINConnect to the N.O. terminal of the right coin switch. Connect the common terminal of

the switch to a BK/W wire.

UY/BKNot used
vY/BNNot used
WwY/RNot used
xY/ORNot used
YY/WNot used
ZzY/GNNot used
aY/BUNot used
bY/VNot used
cY/GYNot used
dGY/WNot used
eBK/W.GNDConnect one of the BK/W wires at pin 27, 28, e, or f to the negative sense terminal of the

power supply (if it exists) and one to the common terminals of the coin switches. Connect two of these wires to the common terminals of the control switches on the control panel.

fBK/WGNDSame as pin e.

Figure 1-1 shows almost all kit parts installed in a typi- 2. Remove the following from the cabinet: cal cabinet. Use this illustration as a guide while you ll Existing PCBs install the parts. gis ™@ Game harness, if it is not Japan Amusement Ma-

  • Turn off power to the game, and unplug the power chinery Manufacturers Association (JAMMA)cord. compatible @ Control panel decals, labels, and controls
Page 14

Installation

M™@ Side decals, graphics, and adhesive. If the cabinet sides are damaged, repair them before putting on the new decals. @ Video display (monitor) shield, display bezel, attraction shield, and marquee.

  • Wipe down and vacuum the cabinet. Paint the cabinet, if required.

Assembling the Control Panel

Parts Needed To assemble the control panel, you need the control panel hole-cutting template, which is printed on page 1-11. Cut out the template sheet near the staples. You will also need the following parts from the kit: Installing the Parts

  • Using carbon paper, transfer the joystick mounting pattern from the template to the control panel. Also refer to Figure 1-2 for the exact locations of all holes.
  • Drill four %" holes in the metal control panel for the joystick’s mounting bolts. 3, Using a saber saw, carefully cut out the large hole for the joystick and the four smaller holes for the pushbuttons. Deburr the sharp edges with a file.
  • Lay the acrylic cover over the top of the control panel and mark the outside shape of the panel on the plastic. Also mark the four pushbutton holes as close as possible to the locations shown on the template. Mark the joystick holes. Lastly, mark the ™@ Clear cover for the control panel positions of the four corner holes that will be used ™@ Control panel decal for securing the cover to the control panel. These . four holes can be placed anywhere near the cor- ™@ Four yellow button assemblies ners — wherever space permits. Two “Start/Fire” and two “Jump” indicator plates 5. Using a bandsaw, cut the control panel cover to its ™@ Four snap-action switches correct outside shape. M@ One 8-position joystick control

™@ Eight #10 x %"-long black carriage bolts, flat wash- WARNING ;

ers, and nut/washer assemblies Wear safety glasses when dri illing the plastic control panel cover. Use care to avoid shattering or chipping the plastic.

Centerline

1.187" Dia. (4 places)

f-250°—|

NOTE The four holes in the comers are not shown in this illus-

Suggested distance from the front of the control panel. Check that the joystick has sufficient clearance before cutting holes. tration. Drill these holes wherever space permits.

1,75" Dia.

Figure 1-2 Locations of Control Panel Holes to be Drilled

Page 15
  • Tape or glue the template to the acrylic cover. To start the saber saw cut, drill a 1/2" hole inside the large joystick hole and inside the four smaller holes for the pushbuttons.
  • Saw out the large joystick hole and the four smaller holes.
  • Drill the four 5/16" holes that will be used to mount the cover to the control panel and the four 5/16" holes to mount the joystick.
  • To prevent injury, carefully deburr all the edges of the acrylic cover.
  • Install the control panel decal on the control panel. Use a sharp X-ACTO knife to trim the outside edge and to cut out the holes for the controls.

= . Install the cover on the control panel with four 4"long carriage bolts, washers, and locknuts.

  • Install the joystick assembly using the four remaining %"-long carriage bolts. Install the four yellow button assemblies, the four indicator plates, and the four snap-action switches. Make sure the START/FIRE plates are closest to the joystick, and the JUMP plates are closest to the outside edges of the control panel. For maintenance and servicing information on the joystick control, refer to Chapter 3 of this manual.

Connecting the JAMMA

Harness

  • If your game cabinet does not already have a JAMMA harness, install the JAMMA harness in the cabinet.
  • Install the split beads on the harness as close to the PCB edge connector as possible. Hold the beads on the harness with the tie wrap included in the kit.
CAUTION You must install the split beads included in the kit on the JAMMA harness to meet FCC requirements.
  • Using Table 1-2 for wiring information, connect the JAMMA harness to existing component harnesses. Use crimp splices or butt soldering. Installation
WARNING Do not simply tie the wires together. If you do, you could cause intermittent problems, loose connections, oxidation, or a fire.

Connecting Power Wires

  • Connect the wires on the JAMMA harness to the wires for the power supply, as shown in Table 1-3. The Batman kit requires +5V and +12V. If -5V is available, it should be used too. Tie off any other voltage wires on the power supply besides +5V, -5V, and +12V. There is more than one wire for each voltage in the JAMMA harness. Use more than one wire for each voltage (connecting them as described in Table 1-3) so that the power wiring does not overload and burn.

Connecting Video Display Wires Connect the wires designated for the red, green and blue video guns along with the sync and ground wires, according to Table 1-3.

Connecting Coin Door Wires

  • Connect the wires on the JAMMA harness to the coin switches and meter according to Table 1-3.
  • Connect one terminal of the door lamps to one of the BK/W wires. Connect the other terminal of the door lamps to the R wire supplying +5V.
NOTE Do not use -5V for the coin door lamps. -5V is required for audio.

Some games have separate power supply outputs for the coin door lamps. If you choose to use these outputs, make sure you connect both terminals of each lamp to the terminals on the power supply.

Connecting the Control Wires Connect the joystick harness and the button harnesses to the JAMMA harness using crimp splices or butt soldering, according to the information in Table 1-3.

Grounding the Cabinet Find the ground lead (green) of the 115V input power line. Connect this lead in daisy-chain fashion to a bare metal part of the coin door, the control panel, the

Page 16

Installation.

video display, and the power supply. This AC ground must be of #18 AWG wire or larger.

WARNING For the safety of players, you must connect the green ground wire as previously indicated.

Checking the JAMMA Connections

Before plugging in the game PCB, turn on the power to the game, and check +5 Volts on pins 3, 4,C, and D of the JAMMA connector; +12 Volts on pins F and 6; and —5 Volts on pins E and 5. Check that the video display and the attraction lamp have power. Now turn off the power to the game.

Installing the Batman”

Board Set

The Batman board set in your kit is shipped already assembled at the factory. The board set consists of the Batman game PCB and the JSA JAMMA Stand-Alone) Audio III PCB, plus attachment hardware.

  • After you have checked the power on the JAMMA connector (above), install the Batman board set in the cabinet. Use the nylon standoffs and four #6 x ¥%'-long screws in the kit.
  • Connect the JAMMA connector to the Batman game board.
  • Secure the JAMMA harness away from the PCB with cable ties. 4, Turn on the power to the game. Check that the boards function. If a video picture is not present, see Chapter 3.
NOTE There is no longer a volume adjustment on the PCB. Volume is now adjusted in the self-test.

Installing the Bezel, Decals, Labels, and Attraction Assembly

The kit parts are shown assembled in a cabinet in Figure 1-1. Installing the Display Bezel Find the cardboard display bezel in the kit. This bezel can accommodate both 19-inch and 25-inch video displays. Follow the instructions on the back of the bezel, and cut the hole and outside edges as required.

Installing the Product ID and FCC Label Place the product ID label and FCC compliance label on the back of the cabinet.

Installing the Side Panel Decals Find the side panel decals in the kit. Wet the left and right side panels of the cabinet with slightly soapy water. Then position the decals as shown in Figure 1-1. Remove any wrinkles in the artwork using a squeegee. Allow the sides to dry.

Installing the Attraction Assembly Find the Batman attraction shield and the attraction panel film in the kit. Using the existing shield as a template, cut the shield and film to size, if necessary. Install them on the cabinet as shown in Figure 1-1.

Setting the Coin and Game Options

Set the coin and game options in the self-test. See Chapter 2 for information about the option settings.

Maximizing Earnings

For maximum earnings, regularly maintain your Batman game following the instructions in Table 3-1, in Chapter 3. When you set up the game and when you collect money, perform the automated self-test and check the controls with the Controls Test in the self-test.

Game Play This section describes the theme of the Batman game and the game play features.

Introduction The blockbuster movie is now the arcade hit! Packed with all the drama and action of the movie, the game even features digitized photos and actual movie soundtrack. Batman is a one-player game with a joystick plus start/fire and jump buttons. A special feature encourages multi-coin drop for added earning power. Players

Page 17

take on The Joker™ and his Goons with the Batrope™, Batarangs™ and Gas Grenades. Batman fights throughout Gotham City™, drives the Batmobile™ and even flies the Batwing™. In the end, share in Batman’s triumphant victory over The Joker atop Gotham Cathedral.

Play Mode The basic storyline remains true to the movie. The dark mood of the movie is further portrayed in the game's graphics, providing a cinematic look and feel to the game. Players begin by choosing one of two coinage options presented. They can either play a onecredit game, or add another credit and get bonus game lives. For players who are looking for added value, this is the way to go! Most scenes require Batman to reach a certain goal. Along the way, The Joker and his Goons try to stop him. Depending on the Goon, they must be hit anywhere from one to four times to kill them. The Joker needs to be hit numerous times in various situations just to chase him away. Batman must rely on his special weapons and fighting skills to be successful. The joystick directs Batman in one of four directions. If used with the jump button, Batman can move diagonally. One button controls firing and shooting. Point Batman and push the button for a powerful fire action. Several weapons are at Batman's disposal. They include: @ Batrope™ — Pass over the Batrope icon to pick up the weapon. Pointing the joystick in the up position and pressing the button shoots a rope up and allows for a quick move from level to level in Axis Chemical™ and the Cathedral. ™@ Batarang™ — Pass over the Batarang icon to pick up the weapon. Each icon supplies 15 Batarangs. Press the button to throw/shoot Batarangs in the direction Batman is facing. Installation

™@ Gas Grenades — Pass over the Gas Grenade icon to pick them up. Each icon supplies 15 Gas Grenades. Press the button to throw Gas Grenades in the direction Batman is facing. Repeatedly pressing the Fire button very fast will sometimes make Batman do some other special moves. These include a spin-kick and a swing-kick (given a low structure overhead). The other button makes Batman jump. Batman is allowed to jump both laterally and vertically. Depending on the situation, proper timing with both joystick and button will create a long jump. Batman can kick from both a stationary position or while running, ifa Goon is nearby. From the Batmobile™, Batman must shoot the enemy cars ahead of him. The first driving wave pits Batman against the Grissom gang’s cars, and the second wave is made of The Joker’s cars. Players aim their shots with the bat symbol cursor on the screen, Destroying each car awards 100 points and increases the progressive score. The next car will be 200, then 300, up to 1000 points. But if a car is missed and passes by, the progressive score value resets to 100. In the Batwing, players must catch as many balloons as they can within the allotted time. By guiding the balloons between the “forks” in front of the Batwing, they can be caught. But The Joker makes this no easy task! His helicopters shoot while flying by, trying to knock the Batwing out of the sky. Aiming and shooting at the helicopters will temporarily allow time to collect the balloons. Batman meets The Joker in many scenes of the game. In addition, The Joker has plenty of surprises for him. They include snapping teeth, a long pistol, deadly gas balloons, and a pen “mightier than the sword”. Batman and The Joker end their battle on top of Gotham Cathedral, where they must fight it out “Mano A Mano’. Here Batman finally settles his score with The Joker, and Gotham City™ is free of his crimes.

Page 18

Installation Batman Universal Kit

1-10

Page 19

Installation

JUMP

START/FIRE

NOTE

This kit has duplicate Start/Fire

and Jump buttons for player

convenience. This template

shows only one side of the

player station. Be sure to drill alt

holes shown in Figure 1-2.

Center Line

aoa

Figure 1-3 Control Panel Template 1-11

Page 20

Installation

Page 21

he 2

  • O 3,

i OF Vid EPR £34! 3

M4 EL ECOE 2) O

33 ¢ cP Gs ne y addition

pi pC 3, 3

rua c pe . a esi whe O

‘i Se he game

: vO fen

hen usp aii ‘ hapic ov

NS a xp abe arraripe

Org CY a eC re all o C L scre

A Le u GSCS

Page 22

Self-Test

Entering and Exiting

the Self-Test

To enter the self-test, turn on the self-test switch either on the game PCB or the JSA III (audio) PCB. Exit the self-test by turning off the self-test switch.

Figure 2-1 Self-Test Menu Screen

Select Test Menu

Choose which test or screen you want to see from this menu, shown in Figure 2-1. Move up and down the list by moving the joystick up or down; you can also press the JUMP button. The corresponding test is highlighted in white. Choose the screen by pressing the FIRE button.

Adjust Volume

The JSA Il (audio) board in this game has no volume control. Instead, use this screen to adjust the volume level for both the attract mode and game play. As long as this screen is displayed, the game music plays continuously to allow you to adjust the sound. The 32 white strips progressively fill in with green as you move the joystick to the right or up to increase the volume.

Statistics

Use the information shown on the statistics screen, in Figure 2-2, and on the histogram screens to keep track of your game use and maximize your profits. Record the information on the Batman statistics page in the back of this manual. The statistics are collected from the last time the statistics were cleared. Follow the instructions at the bottom of the screen to clear the statistics. Press the FIRE button to leave this screen and go to the histograms.

Table 2-1 Summary of All Self-Test Screens

Video RAM (looping) Color RAM (looping) Program RAM (looping) All RAM (re-start) Complete ROM Test Dual Playfield Test

Screen,Use or PurposeScreen.Use or Purpose
Adjust VolumeTo set the game volume.Motion Object TestTo check the movement and
StatisticsTo display the game statistics.color of game objects.
Game OptionsTo set and check the game op-Alphanumeric TestTo check the condition of the

tion settings. alphanumerics.

Coin OptionsTo set and check the coin op-Monitor Tests
tion settings.Color TestTo check the video display
Sound Board TestTo check the audio circuits.color circuits.
Switch TestTo test the player controlsPurity Test ScreenTo check the red, green, blue,

(button and joystick switches). white, and grey purity.

Complete RAM TestConvergence TestWhite Screen: To check and

To check the video RAM. To check the color RAM. To check the program RAM. To check all RAM. To check the program ROMs. To check the playfield circuits. adjust video display convergence of red, blue, and green. Violet Screen: To check and adjust video display convergence of red to blue. Green Screen: To check and adjust video linearity across the face of the picture tube.

2-2

Page 23

Self-Test

New 1-credit game times in seconds

New 2-credit game times in seconds 1-credit continued game times in seconds

2-credit continued game times in seconds

Game Options

Check and select the game options on this screen, shown in Figure 2-3. To move through the options, move the joystick up or down. Change the option highlighted in red. The factory default settings are shown in green type. To

change a setting, move the joystick right or left. To

save the new settings, press the FIRE button. This returns you to the Select Test menu. If you want to keep

Figure 2-2 Statistics Screen

The following explains the information shown on the Statistics screen: ™@ Left Coins show the number of coins counted in the left coin mechanism. ™@ Right Coins show the number of coins counted in the right coin mechanism. Aux Coins shows the number of coins counted on the auxiliary coin input. @ 1-Credit and 2-Credit New Games shows the number of new games played after being given 1 or 2 credits. @ 1-Credit and 2-Credit Cont Games shows the number of continued games played after being given 1 or 2 credits. Total Games is the number of games played. ™@ Idle Mins is the number of minutes the game was not being played. @ Play(ed) Mins is the number of minutes the game was being played. ™@ Error Count shows the number of errors counted in the erasable memory. If you have an error count, the statistics may be wrong. If you consistently have errors counted for several weeks, replace the EEROM at 12R. ™ Total Coins is the number of coins inserted into all coin mechanisms. The four histogram (bar graph) screens are shown after the statistics screen. The mean time for each histogram is highlighted in red. The histograms are:

DIFFICS

Figure 2-3 Game Options Screen

the original setting, although you have changed it, press the JUMP button. This brings back the original setting. Use the FIRE button to exit. The game option settings with factory defaults are shown in Table 2-2.

Coin Options

Check and select the coin options on this screen, shown in Figure 2-4. To move through the options, move the joystick up or down. Change the option highlighted in red. The factory default settings are shown in green type. To

save the new settings, press the FIRE button. This returns you to the Select Test menu. If you want to keep the original setting, although you have changed it, press the JUMP button. This brings back the original setting. Use the FIRE button to exit.

Page 24

Self-Test

Table 2-2 Game Option Settings

Option Settings Explanation

Difficulty LevelEasyModerate ¥Lets you adjust the game difficulty: harder games have
HardHardestmore enemies and the enemies move and shoot faster.
Starting Lives23%4,5Lets you adjust the number of lives that players can start a

game with.

Special Lives Mode2x + 1 life for 2 creditsLets you determine how many “bonus” lives to grant if a

2x + 2 lives for 2 credits player pays for two credits at the beginning of a game. 2x + 3 lives for 2 credits None

Extra LifeEvery 50,000 pointsLets you determine whether and when extra lives are

Every 75,000 points W granted, Every 100,000 points No extra lives

Sounds During AttractYesWNoLets you choose whether the Batman music is played during

the attract mode.

Clear High Score TableNovYesLets you clear the high score table.
Auto Clear High Score TableYes WNoAutomatically resets the high scores to the factory defaults

after 2000 games, unless a player has entered his initials within the previous 200 games.

FBI ScreenYes WNoPeriodically displays the Federal Bureau of Investigation

emblem and the message “Winners Don’t Use Drugs” in the attract mode. If this game is used outside of the U.S., you should set this option to No.

Restore Factory OptionsNovYesLets you set all the game options to the factory options or

V Manufacturer's recommended settings. These settings are shown in green on the screen. lets you use your own settings. Make sure you set this to no to use your own settings.

The coin option settings and factory defaults are explained in Table 2-3.

Figure 2-4 Coin Options Screen

Sound Board Test

The sound test indicates the condition of the audio circuits on the JSA II (audio) PCB. This test also checks the coin mechanism switches. The sound test screen appears in Figure 2-5. Use the joystick to select the sound, and press the FIRE button to listen to it. Press the JUMP button to stop all sounds. Simultaneously pressing the FIRE and JUMP buttons returns you to the Select Test menu.

Switch Test

The controls test screen is shown in Figure 2-6. Test the control panel buttons and the joystick. As you press the buttons, the name is highlighted in grey on the screen. Because the two buttons on one side of the joystick are wired in parallel to the other two buttons, both sets of buttons should highlight the appropriate name on the screen.

Page 25

Self-Test

Table 2-3 Coin Option Settings

Option

Settings Explanation

Free Play Discount to Continue

Game Cost

Bonus for Quantity Buy-in

Right Mech Value

Left Mech Value

V Manufacturer's recommended settings. These settings are shown in green on the screen. Now Yes Set this to “Yes” for demonstrating the game. Now Yes Lets you offer a reduced price per credit when players want to continue a game. 1 coin 1 credit W Sets the number of coins required for one credit. 2 coins 1 credit

8 coins 1 credit None W Lets you choose various levels of bonus coins or no bonus. 2 coins give 1 (extra coin) 3 coins give 1 (extra coin) 3 coins give 2 (extra coins) 4 coins give 1 (extra coin) 4 coins give 2 (extra coins) 4 coins give 3 (extra coins) 5 coins give 1 (extra coin) 5 coins give 2 (extra coins) 5 coins give 3 (extra coins) 6 coins give 1 (extra coin) 6 coins give 2 (extra coins) 6 coins give 3 (extra coins) 7 coins give 1 (extra coin) 7 coins give 2 (extra coins) 7 coins give 3 (extra coins) 8 coins give 1 (extra coin) 8 coins give 2 (extra coins) 8 coins give 3 (extra coins) 9 coins give 1 (extra coin) 9 coins give 2 (extra coins) 9 coins give 3 (extra coins) 1 coin counts as 1 coin W Is the number of coins each coin counts as in the a right coin mechanism. 8 coins count as 1 coin 1 coin counts as 1 coinW Is the number of coins each coin counts as in the we left coin mechanism. 8 coins count as 1 coin

Figure 2-5 Sound Test Screen Figure 2-6 Switch Test Screen

2-5

Page 26

Self-Test

If the name is not highlighted, check the connections, switches, and mechanism. Simultaneously press the JUMP and FIRE buttons to return to the Select Test menu. Moving the joystick causes one of the nine large white dots to appear when you move the handle up, down, left, right, or to one of the four diagonal points. If you are installing a new joystick, use these markers to help you correctly orient the control. If the dots on the screen do not appear, check the joystick connectors, switches, and harness for that direction of movement. See Table 3-1 for more troubleshooting suggestions.

Complete RAM Test

Use this selection screen, shown in Figure 2-7, to choose which RAM test you want to perform. Use the different tests according to Table 2-4.

Figure 2-7 RAM Test Menu If you see an error in any of the RAM tests, the game may display the location of the bad RAM. If you see a screen of “garbage”, press the START button. If is displays COLOR RAM BAD (6A-6B), replace those chips. If is just continues to display garbage, the error is probably in the video RAM. Press and hold the FIRE button to leave the individual RAM test and return to the Select RAM Test menu. To return to the Select Test menu, choose Exit RAM tests and press the FIRE button once more.

Complete ROM Test

The ROM test screen is shown in Figure 2-8. The checksum information appears. If the game has no ROM errors, you see the message ALL ROMS are OK. If the game does have ROM errors, the location of the bad ROMs will be displayed. See Table 2-5 for the locations of the ROM errors.

Note: The OS (operating system) and program dates may not match those shown in Figure 2-8. Press the FIRE button to return to the Select Test menu.

Dual Playfield Test

This test, shown in Figure 2-9, checks the transparency, movement, and color of various objects on both playfields. Move the foreground playfield up, down, left, and right with the joystick. If you hold down the FIRE button while using the joystick, the background playfield should move in all four directions. If you press the JUMP button and move the joystick up or down, you will bring the rear playfield to the front, and send the front playfield to the rear. If you press the JUMP button and move the joystick left and right, you will bring a new picture to the front and rear playfields. Simultaneously press the FIRE and JUMP buttons to go to the Select Test menu.

Table 2-4 When to Run the RAM Tests

Figure 2-8 Complete ROM Test Screen

2-6 Location of

Problem‘Type of TestRAMs Tested
Playfield is erratic orVideo RAM8E, 8J

looks wrong

Motion objects are notVideo RAM8E, 8)

working properly or game play is erratic. Color RAM Colors look wrong. 6A, 6B

Page 27

Table 2-5 Bad ROM Locations by Error Address

Error ROM Location Error. ROM Location

Address High Address Low

Program ROM 8x1024 Configuration:

OK-H10ROK-LTR
40K-H9/10R40K-L6R
80K-HOR80K-L5R

Figure 2-9 Playfield Test Screen

Motion Object Test

The motion object test screen, shown in Figure 2-10, tests the movement and color of various game objects Select the test function with the JUMP button. Use the joystick to move objects, change pictures, change object size, change object palette, and to toggle the horizontal flip. Simultaneously press the JUMP and FIRE buttons to go to the Select Test menu.

Alphanumeric Test

This test indicates the condition of the alphanumerics in the game. Bank 0, which shows the full character set, is displayed first. Press the JUMP button repeatedly to display Banks 1 through 7 of the alphanumerics. If you see an error on the screen, check the EPROM at 10M.

Monitor Tests

When you enter this test, you see a menu of three choices, plus an Exit Menu selection. Each of the monitor tests is explained below. Self

Figure 2-10 Motion Object Test Screen

Color Test This test indicates the dynamic range of the video display color circuit. The screen is shown in Figure 2-11. The screen should be white, red, green, and blue from top to bottom, each with a color scale from dark to bright, left to right. If the screen does not match this description, adjust the video display as described in the video display manual. In addition, you can use the joystick to move a thin horizontal band that “stains” or inverts the video level of whatever area it is positioned over. Pressing the FIRE button toggles the screen between 32 and 64 color levels. Pressing the JUMP button alternately removes and shows the border, horizontal band, and text. Return to the Select Monitor Test menu by simultaneously pressing the FIRE and JUMP buttons.

Purity Test The color purity test has five screens. Each screen is a solid rectangle of color. The first screen is red. The other screens, which you can see by pressing the JUMP button, are green, blue, white, and gray. These screens show the adjustment of the color purity of the video display. Each screen should display a rectangle of color, with no curving at the corners, no unevenness of color, and no lines in the display. If the screens are not correct, adjust the video display as described in the video display manual. Return to the Select Monitor Test menu by pressing the FIRE button.

Convergence Test The convergence test has three screens: first white, then violet, and finally green. The white screen is

Page 28

Bauman Universal Kit Self-Test

Figure 2-11 Color Test Screen Figure 2-12 Convergence Test Screen

shown in Figure 2-12. To see the violet and green M™ The convergence of the lines on the violet and screens, press the JUMP button. Press the FIRE button white screens should be within 2 mm. to go to the Select Monitor Test menu. - _ 5 . If these screens do not meet these criteria, adjust the Check the following on the screens video display as described in the video display manual. Ml The grid lines should be straight within 3 mm, and the lines should not pincushion or barrel.

2-8

Page 29

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 30

Troubleshooting and Maintenance

Table 3-1 Troubleshooting Table

Problem, Suggested Action

Coin Mechanism Problem

Game Play Problem

Joystick Problem

Sound Problem

Video Display Problem ‘Sync problems.

Screen is dark.

Display area wavers or is too small.

Picture is wavy.

Picture is upside down. Convergence, purity or color problems. Picture is not centered. Check the wiring to the coin mechanism. ‘Check the voltage to the + side of the mechanism. Test the coin mechanisms with the sound test screen in the self-test.

. Check the harness and connectors. Perform the self-test. Check the voltage levels on the PCB. See Table 3-2, Voltage Inputs and Test Points. Check What ROM Problems Look Like, Table 3-3, for specific ROM problems. Has the joystick been lubricated with white lithium grease? If not, lubricate it Check the harness and connectors. Check the switches on the joystick. If you took the joystick apart, have you reassembled it correctly? Make sure all the parts on the joystick are in good repair. Repair or replace parts. HYMAN RON ONS

Is the speaker volume turned up? If not, increase the volume by using the first self-test screen (Adjust Volume). . Check the voltage on the JAMMA connector: Check the wiring from the PCB to the speaker. Check the voltage level to the PCB. See Table 3-2, Voltage Inputs and Test Points. . Replace the speaker. WRwN

Does your display need separate positive sync? See the Video Display Sync Problems section in this chapter.

  • Is the game plugged in? . Is the game turned on? ‘Are the connections good? Is the line fuse good? . Is the display brightness turned up? Are the solder connections on the line filter and transformer good? Is the JAMMA connector on the PCB tightly connected? . Check all of the items below: If you answer “no” to any question, you have a problem with the video display, not with the game circuitry. See your video display service manual. Q a. Do you have power to the video display? b. Are the video display’s filaments lit? ¢. Do you have high voltage to the video display?
  • Are the voltage levels to the video display PCB correct? (Power voltage is 100 VAC or 110 VAC, depending on the type of video display. Video signal voltage is 0.5 to 3.5 Volts.)
  • If the level is not correct, check the connectors and the harness. DIAN RON
  • Do you have correct power voltage to the video display PCB? . Do you have correct high voltage to the video display? i
  • Is the video ground connected to the display?
  • Are the sync inputs connected properly? Does your monitor need a separate positive sync? See the Video Display Sync Problems section in this chapter. Switch the horizontal or vertical yoke wires on the display. Use the screens in the self-test to adjust the video display. Use the adjustment procedures in your video display manual. Use the centering procedures in your video display manual.

3-2

Page 31

Troubleshooting and Maintenance

Table 3-2 Voltage Inputs and Test Points on the PCBs

+5 £0.25 VDC+5V1 on Batman Game PCBLogic power from the switching power “supply.

CR3 LED on Batman Game PCB Lights up when 5 V is oe to the PCB and the reset @sn j jumper : “is open. oe

+12VCR9 LED on JSA TI PCB© Lights up when the +12 V supply is god.
—5VCR3 LED on JSA I PCBLights up when the -5 V supply is good.

Table 3-3 What ROM Problems Look Like

Problemthe ProblemCheck the ROMs at: -
Program works, but the motion objects orGraphics13C, 13F, 13M, 13R, 14C, 14F, 14M, aR,

playfield are wrong. 15C, 15F, 15M, 15R, 16C, 16F, 16M, or 16R on the Batman Game PCB

Garbage on screen; program doesn’t work.Processor6L/M on the Batman Game PCB
or game program is ertatic.Program ROM5R, OR, 7R, 9R, 9/10R, or 10R on the Batman

: Game PCB.

No sound or erratic sound,Audio ROM:ue

Audio ADPCM 12C, 12E, 15E, 17E, or 19E on the JSA Il PCB

Before you begin troubleshooting, be sure to check Table 3-1 to narrow down the cause of a problem. If you can measure voltages, refer to Table 3-2 for a list of all important voltages in this game and where to test them.

Joystick Control

The joystick control is shown in Figure 4-2. If you have trouble with the joystick, make sure you have assembled it properly. Refer to the instructions included with the joystick or see Figure 4-2. If you need to repair the joystick control, first remove it from the control panel. Disassemble it by removing the retaining ring at the bottom of the shaft. To replace any of the four switches, remove the two screws that secure each switch. ROMs and RAMs

If you have think you have bad ROMs or RAMs, first perform the ROM or RAM test in the self-test procedure. If you have a ROM problem, see Table 3-3

Video Display Sync

Problems

This game board provides separate positive horizontal and vertical sync on a separate connector, for those monitors that will not work with the comp negative sync signal provided at the JAMMA edge connector. This connector (labeled “Sync”) is located near the edge connector. Pin 1 is horizontal sync, Pin 2 is vertical sync, and Pin 3 is ground.

Page 32

Troubleshooting and Maintenance Bauman Universal Kit

Page 33

ee oe

Page 34

Parts Illustrations

047205-01 Attraction Shield

049029-01 Bezel With Graphics|

7551128 10-24 x34" Cariage Bot (4 places) 175014-1040 #10 Flat Washer (4places) 17706-0040 10-24 NuyWasher Assy. (4places)

178283-008 JUMP indicator Pate

on7meo1 Cortrot Panel Cover

04902601 Control Panel Decal

178253-003 STARTIFIRE indicator Prato 178237-002 Yetow Button Assy. (places) 160044001 ‘Snap-Aaion Switch pieces)! 7087-001 8 Postion Joystick ASS.

7551128 0.2443 Carriage Bot (4 places) 175014-1040 {#10 Fat Washer (4.places) 17026-0040 10-24 Nut Washer Assy. (4 places) }049028-01 tp Attraction Film Items Not Shown:

A046501-01 JAMMA Harness Assy. TM364

Installation Instructions, 038158-01 Product 0. Labet 039450-01 FCC Compliance Labe!

jo49027-01 Side Panel Decal (2 places)

|A049100-02 Batman Board Set Assy. '178265-001 L-Style Nylon Standott

| 178283-004 JUMP Indicator Piate

1178283-003 STARTIFIRE Indicator Pate 178237-002 Yellow Button Assy. (2 places) "160084-001 ‘Snap-Action Switch | places)

Figure 4-1 Parts for Batman Universal Kit

4-2 A049035-01 B (4 places) |72-6612S #6 x 2/4 Cross-Recessed, Type-AB Screw (4 places)

NOTE Your game cabinet may not appear exactly as shown in this illustration. The picture ‘shows the parts installed in a typical game cabinet.
Page 35

WiGold Switch

‘T2HAAGI6S 6x1" Tapping Screw 175014-1061 ‘Steel Washer

'99-080030 Compression Spring

3/8" Retaining Ring

Figure 4-2 Joystick Assembly 171097-001 Parts Illustrations

99-080040 Black Joystick Assy.

Page 36

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 37

Batman Universal Kit Parts Illustratrations

2 2 C2 2 M3403 2 RHA HH alg 8b) 9 ee UO

Figure 4-4 JSA III PCB Assembly A048974-01 A

Page 38

Parts Illustrations Batman Universal Kit

4-6

Page 39

L

Page 40

Schematic Diagrams

arnt (Ox) FeO] O———* iD COND Rern-2 0———s nD +5V) DerwA-3 O————* +50 (502 uRewa-4 0-2 +50

  • Sra-s 0o———* -5v Co120) ewi-6 O-———* +120 KEY een-7 O- CCONTRL? JarRA-8 O————* CONT, CORLOCKL) erRA-9 O- CSPRRL+ 2 JARPR-18 O——* SPKR> CRUD?) JRL, O————# FLD CRED) YRewR-12 O——— RED CELUED sre-13 0——— BLUE {VID GND) JRPR-14 O———— GoD CSELFTEST) JRPA-15 O———* SELFTEST COOINL) Jae-16 O———« COIN. ESTARTLD UReee-17 O———— STATE CUPLAD Jeewn-18 O———# UPL CDOMLAD JrwA-19 O———# Dn CLEFTLAD Jrren-28 O———0 LF CRIGHTLAD JRWA-22 O——— RT CLBUTTONL > JRewR-22 O———e FIRES CLBUTTONZ > JRPA-23 O———* ACTAL CLBUTTONS ) JReWA-24 O———e ACTEL CLEFTLBD Jreen-25 O- CRIGHTLB) JARWA-26 O~ (GND) JAWR-27 O———* OD GND) JRreR-28 O———# GAO

i

o-$2-= pup-oND ofa Au: Be sone

smc 1 O—sHSTNC.OUT 2 O—e vstNc. OUT 3 oe

5-2 com> OND? ee) +50) c-3) co1zv> Ke CCONTRR ¢G-LOCKR CSPRRI- 2 cAUD GND? CGREEND ¢siNc) cSERVICED TILT) come) cSTARTR? CUPRA) URHR-V O———« UPz CDOWNRAD JRMPA-W O————« D2. CLEFTRAD JRRPR-X O———* LF2 CRIGHTRAD JeewR-Y O———— TZ CRBUTTONL JREPR-Z O—s FIREZ ERBUTTONZ) JAM-A O——# ACTA ERBUTTONS) IEMA O————« ACT? CLEFTRBD JRMMA-OC O———# /SERVICEZ CRIGHTRE) JRMMA-DD O- COND? JerMA-EE O———— GAD COND) JRNMA-FF_ O————# GAD

ts conta, of} i

Page 41

Batman Universal Kit Schematic Diagrams

ms ATG Woe me ATG WoL me HAG Moe m9 HIG HOLE

‘SPARE GATES

POWER-ON

ssenvice psene ssenvicee =} —— + + Twat (Sep SELFTEST S-TEsT

Figure 5-1 Batman Game PCB Assembly Schematic Diagram 048986-01 B

Page 42

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 43

”

RP 24K

az 2Nave4 —_ D2 eR a ee

su

msn 1 HSTNC.OUT

roorsne

cvsinc: vsme.cuT c my 13 cae, Littere Tistere Titer on

Figure 5-1 Batman Game PCB Assembly Schematic Diagram 048986-01 B Schematic Diagrams

Page 44

Schematic Diagrams

ssvsees CPU

a7, pcarena

ans, Ans cma) PAC 1163

aie jaa 3] 2 v2

ais

are wz “6 azi nee aie ais air Ate I Rie

iz, ALL aie

osu ane au BU at g Y

Rae jaa 13

Ne/sec_ic Aid o—yprdize esi Ns/Secte a3 esi3

oTeen, assres ot * ‘see azn a 198 2 >0-+—« ens

7vRWALT »—} ‘sea naire —S4 orrck ” uaxt Ry a3 crue sateen ‘nos sd pe

eared

Page 45

Bauman Universal Kit Schematic Diagrams

wee 12261

ow LS ver | 7HRUEN 2818 as

sv ellair sagsev eet aysanAL? on
wag? E116 mosrexa|Zane nestersRosi zxs|
mate935 WvekeZeansans “Zeens

ease ase rae 26% rats 33 aiz mate 757? rani 23 St rare 201° ra

raor{2t_ is23
aor PeeoseDie
raa eCmETeFe]
rasBS ig—oieFTE
meDaremaBie
raoats" oie3

rae Has ra 2s te oe _| socxer zz] 24 sree wie

ified sumtin 22 Ais ssvetlai7 aq z Sat? et? “S486 nosizKs: ha

En}{P26 Rosi2Ks)ROSL2ZKS,
res Beiaae

comer Tas tae rae es ane mee mle is — < Oe ms SHE ES mins OSH ao

  • ioe raz 12/8 bed FORE ca te mo SOCKET

TOR Ra 1 SORA]

veaas2mema

ma usvase ma was

miagegenmz onze

ALL aba ALL mt ne ” = a ae re Fee)

2ee8 ee

fe | me or ise] [es tear me MEE ma ae mae ie 7 i

Figure 5-1 Batman Game PCB Assembly Schematic Diagram 048986-01 B

5-7

Page 46

Schematic Diagrams Batman Universal Kit

s1u

oy “ +. oF a7 evra: ? Oxa oo

= come

© mt © ric we

@ me © iG Hoe

@ m3 © Mie woe

re oo © HG Hoe cores

GND AND AGND TIED INTERNALLY NEAR MSM629S

Page 47

eye

up» RA 210K

a3 30K

Rr

zi. ae -Ts wreese car aNaven

rip

ripe

rip car dese aon Tt 0N0

os

@riovera. re

© rioucia. vee

FEDUCIL MARK a Sina Lies]

PKR:

ne) soa 4D __i0) (S574

048973-01 A oy Schematic Diagrams

Figure 5-2 JSA Il PCB Assembly Schematic Diagram

5-9

Page 48

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 49

This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.

Page 50

Schematic Diagrams

e un3ae3

Urges Oo

ry Lnaees

Page 51

Batman Universal Kit Schematic Diagrams

ra unaaes

Figure 5-2 JSA II PCB Assembly Schematic Diagram 048973-01 A

5-13

Page 52

Schematic Diagrams

5-14

Page 53

Date Recorded: Location:

Meter:

Statistics Screen

Left Coins:

Right Coins: Auxiliary Coins: 1-Credit New Games:

2-Credit New Games:

1-Credit Continued Games:

2-Credit Continued Games:

Total Games:

Idle Minutes:

Played Minutes:

Error Count:

Total Coins:

TM & © 1990 DC Comics Inc.

Page 54

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 55

a ATARI J GAMES

¢ P

g

a j ae

/ :

Atari Games Corporation E

675 Sycamore Drive 2 P.O. Box 361110 Es

Milpitas, CA 95036 oS