CATHODE RAY TOMES

Lost World LstwldURadd

The Lost World: Jurassic Park (pinball, CPU 2.02, display A2.01) (Sega, 1997) · Document · 14 pages · 15 sections · original scan

Page 1

1ST PRINTING-FEB

SEGA

y

THE LOST WORLD

Cite SP

OWNER’S MANUAL

ADDENDUM U/R

SEGA ENTERPRISES, USA

MANUAL NO. 4201-6325-01

Page 2

Warranty

Your new SEGA product is covered for a period of 90 Days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating conditions. No other product in this machine is hereby covered.

Sellers sole liability in thew event a warranted part described above fails shall be, at it’s option, to replace or repair the defective part during the warranty period. For Warranty claims, contact your SEGA distributer.

Should the Seller determine, by inspection that the product was caused by Accident, Misuse, Neglect, Alteration, Improper Repair, Installation or Testing, the warranty offered will be null and void.

Under no circumstances is the Seller responsible for any loss of profits, loss of use, or other damages.

This shall be the exclusive written Warranty of the original purchaser expressed in lieu of all other warranties expressed or implied. Under no circumstance shall it extend beyond the period of time listed above.

Page 3

® AC UNIT (JPT1-1020

fe) °

oO} |

°° fe)

ITEM NO. PART NO. DESCRIPTION

1N/AAC BRKT
2N/ALINE STRAIN RELIEF
35091-5234MAIN ROCKER SW 254
Page 4

€) ASSY MAIN BD (JPT--4000)

ASSY SHIELD CASE (JPT-0100)

Page 5

ASSY MAIN BD (JPT-4000) ASSY SHIELD CASE (JPT-0100)

ITEM NO. PART NO. DESCRIPTION

laN/ASHIELD CASE MODEL 3
3aN/AFILTER BD MODEL 3 JPT
6aN/ASTICKER 833-13171
1N/AASSY SHIELD CASE
2N/AMAIN BD BASE
3N/ASHIELD CASE BRKT
6N/AGAME BD JPT

THESE PARTS ARE NOT AVAILABLE SEPERATELY INSTEAD THEY ARE SOLD AS A COMPLETE UNIT.

ALL JPT-4000 ASSY MAIN BD

Page 6

ASSY PWR SPLY (JPT1I-4100)

Page 7

ASSY PWR SPLY (JPT-4100)

ITEM NO. PART NO.

1 838-13142 2 999-0677

101 838-11651-91 102 838-11650-01 103 838-11650-28 104 LOCAL PURCHASE

105 N/A 106 838-11855 107 260-001 1-02 (0-2/2)

DESCRIPTION

BASS AMP 50Wx2 AUDIO XFMR 12.8V 6Ax2 23V 9.6Ax2

LOWPASS AMP EQ.PWR AMP JPT A EQ. PWR AMP JPT B FUSES; EQ AMP FUSES, PTV FUSE, MAIN FUSE 4A slo, 5A slox2, 8A slo GND BRCKT SSR CONN BD AXIAL FLOW FAN AC 120V 50-60HZ

Page 8

TIN] Uy Gs JO ARTA, AG] wOlye o OE TEe1ag Sy] TT WLOS se OTR] Sy (/1-@) COOOZ-LLdT) di LINN TOYLNOS (2

Page 9

@) CONTROL UNIT 1P (JPT1-2000)

ITEM NO. PART NO.

1 JPT-2030 2 COP-2005 3 125-5124 4 253-5404-02 5 253-5405-02 6 253-5406-02 7 999-0675

101 280-5124-03 102 509-5080 201 000-P00308-0B 202 012-P00308 203 FAS-000015 204 FAS-500006 205 060-F00300 (D-2/2)

DESCRIPTION

SENSOR UNIT STOPPER PIN TORSION SPRING COVER LEFT RED COVER RIGHT RED TRIGGER RED PROTECT TUBE W/WIRE; COUPLING; WASHER

NYLON CLAMP NKO3 SW MICRO TYPE M SCR PH BLK M3 X8 TAP SCR#2 PH 3 X8 M SCR PH BLK M3X8 CAP NUT TYPE 3 BLK M3 FLT WSHR M3

Page 10

@3 CONTROL UNIT zP <JPT1-2050) (9-1/2)

3) ® ©) Se)

tend the actuator as sham in the Detail Fa Actuator so a8 ta allow the trigger of <3: to turo

rasmiteh UNAFF oorrectly, eB ae, SCTE: Wher: ase crcl im

Page 11
  • CONTROL UNIT 2P (JPT1-2050)

ITEM NO. PART NO.

1 JPT-2030 2 COP-2005 3 125-5124 4 253-5404-01 5 253-5405-01 6 253-5406-01 7 999-0675

101 280-5124-03 102 509-5080 201 000-P00308-0B 202 012-P00308 203 FAS-000015 204 FAS-500006 205 060-F00300 (0-2/2)

DESCRIPTION

SENSOR UNIT STOPPER PIN TORSION SPRING COVER LEFT BLUE COVER RIGHT BLUE TRIGGER BLUE PROTECT TUBE W/WIRE; COUPLING; WASHER

NYLON CLAMP NKO3 SW MICRO TYPE M SCR PH BLK M3 X8 TAP SCR#2 PH 3 X8 M SCR PH BLK M3X8 CAP NUT TYPE 3 BLK M3 FLT WSHR M3

Page 12

OPTIONAL DOLLAR BILL ACCEPTOR

@ THE COIN DOOR ASSEMBLY USED ON LOST WORLD U/R COMES EQUIPPED TO ACCEPT A DOLLAR BILL ACCEPTOR. ALL NEEDED WIRING CONNECTIONS ARE CONVIENENTLY LOCATED INSIDE THE GAME FOR THIS APPLICATION.

@ THE COIN DOOR CAN ACCCOMMODATE THE FOLLOWING

VALIDATORS:

HOLE POSITION#1 Mars 2000 series (FORWARD-MOST POSITION)

HOLE POSITION#2 Mars 2000 series DBV45 (JCM)

HOLE POSITION #3 CURRENTLY NOT USED

HOLE POSITION #4 Dsio1*

*The back flange on the chute can be removed for hold position #4. If the flange is not removed, it may interfere with the back of the cabinent.

The frame and cashbox enclosure on this coindoor has been modified to accomodate a Mars 2000 series upstacker. A 2000 series stacker can be added by simply removing the top two entry door and replacing it with a one entry door with a cut-out for a stacker. This one entry door can be ordered through Coin Controls or one of Coin Controls autherized distributors. The part number is 91-4000-01. The Mars stacker can be obtained through an autherized Mars distibutor.

Page 13

mo og) PIN yea rRjO Los 8 Ov RUN ERE ) lt. tT ele 4 tlolw oa tia ENTRY COIN DO! Woy HURART 87. FLA GROVE TI Cabo ate lad

MARS SERRE Zan PvE ANARTARLE

fag 2 DESTE PT

aie Ullah at well SA" iM eLdR ae

“1 lel

aki ‘sl TER ; : eT if . a1

WORM ae ENS

Page 14

PARTS LIST NOTE:

When ordering these parts please use these part numbers as replacement.

CASTERS/LEG LEVELERS

CASTER 2 1/2”: 999-0169

LEG ADJUSTER BOLT 1/2x13x3: 999-0167

See diagram below for reference.

CASH BOX

CASH BOX: BOX-CASH

CASTER

HEXAGON BOLT