Mortal Kombat 2 Kit (16-44029) Amendment (16-9713 Feb 2 1994)
Mortal Kombat 2 Kit · Amendment · 3 pages · 3 sections · original scan
Page 1
16-9713 February 2, 1994
EM jeld_Installati Instructions For Mortal Kombat il Conversion Kit_#44029
installation of this kit ensures compliance with FCC class "A" regulations regarding radiated emissions.
PARTS INCLUDED
| Number | Description | Quantity |
| 02-5001 | Spacer | 1 |
| 03-7520-2 | Ty-Wraps | 19 |
| 03-7655-8 | Cable Clamp | 6 |
| 20-9941 | EMI Shield | 1 |
| 4106-01115-00 | Sheet Metal Screw #6x1/2 | 30 |
| 4703-00008-00 | Lock Washer | 1 |
| 5556-13956-00 | Ferrite Bead (large) | 1 |
| 5556-13957-00 | Ferrite Bead (small) | 2 |
| 5795-10937-06 | Ribbon Cable | 1 |
| 5825-06523-00 | Ring Terminal | 2 |
INSTRUCTIONS
- Tur the off power to the game and unplug it from the electrical outlet. Remove the back door of the cabinet.
- Remove existing main harness and related cabling from the cabinet.
- Mount the EMI shield inside the cabinet. Ensure that the fold is toward the front of the cabinet.
- Mount the circuit boards, power supply and the cable clamps on the top of the EMI shield. Use sheet metal or wood screws to attach the circuit boards, cables, cable clamps and switching power supply into the cabinet.
Note: Care must be taken to ensure proper placement of circuit boards and cables. Precisely follow the drawing on page #3 for correct locations.
- Attach the ground braid from the video signal cable to ihe video circuit board. Use the metal spacer as a PCB stand-off. Use the #8 external tooth lock washer between the video signal cable ground lug and firmly attach the cable using a seli-tapping #8 wood or sheet metal screw through the ground lug and the PCB spacer.
- Fold the EMI shield cover over the circuit boards. Align the mounting holes in the top cover with the mounting holes in the shield bottom. Secure the top cover to the bottom using the #6 hex head wood screws provided.
Note: Route the cables out the EMI enclosure via the slit openings in the sides of the EMI Shield.
- Attach the large ferrite bead to the cable bundle going to the control panel. Position the bead as close to the EMI shield as possible. Use ty-wraps provided to secure the ferrite bead in place.
- Attach one of the small ferrite beads to the video signal cable. Position the ferrite bead as close to the EMi shield as possibie. Use ty-wraps provided to secure the ferrite bead in place.
- Attach the remaining ferrite bead to the speaker out cable. Position the bead as close to the EMI shield as possible. Use ty-wraps provided to secure the ferrite bead in place.
Page 2
- Attach the ground lug from the video signal cable to the video monitor chassis safety ground. Connect the video signal cable to the monitor signal inputs.
A PPL NNECTION:
a <a 3233 $48 8
° ol ° © EEE oljolo e)
is VIOLET-YELLOW violet RED (+5V)
BLACK GREEN-YELLOW
BLACK YELLOW (ny ORANGE (+120
Page 3
RACK DRAWING
GROUND BRAID (attach where shown)
i} MEMORY EXPANSION BOARD
CPU BOARD
P12
fe)
st a a \ |
POWER SUPPLY
Gl. CABLE
COIN METER CABLE