CATHODE RAY TOMES

Crater Raider UR System Information Manual (0A57-00300-0100)

Crater Raider U.R. (Bally Midway MFG. CO.) · Document · 9 pages · 10 sections · original scan

Page 1

SYSTEM INFORMATION

MANUAL

CRATER RAIDER U.R.

Cally MIDWAY MFG. CO. nt Avenue

Page 2
WARNING THIS GAME MUST BE GROUNDED. FAILURE TO DO SO MAY RESULT IN DESTRUCTION TO ELECTRONIC COMPONENTS.
WARNING: This equipment generates. uses. and can radiate radio frequency energy and i not and used in accordance with the instructions manual. may cause interference toradio communications It has been lested and found to comply with the imits tor a CLASS A computing device pursuant to SUBPART J of PART 15 of FCC RULES. which are designed to provide reasonable protection agaist such interference when operated ) in acommencal environment Operation of this equipmentina residential area ts hhely to cause interference in which case the user al his own expense will be required to take whatever measures may be required to correct the interference. a

ELECTRICAL BULLETIN: FOR ALL APPARATUS COVERED BY THE CANADIAN STANDARDS ASSOCIATION (CSA) STANDARD C22.2 NO. 1, WHICH EMPLOYS A SUPPLY CORD TERMINATED WITH A POLARIZED 2-PRONG ATTACHMENT PLUG.

CAUTION: TO -PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET

Eee tae BLADES CAN BE FULLY INSERTED TO PREVENT BLADE

ATTENTION: POUR PREVENIR CHOCS ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR. UNE PRISE DE COURANT OU _UNE AUTRE SORTIE DE COURANT, SAUF SI! LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A DECOUVERT.

Bally MIDWAY

. Invites You Jo Use our TOLL FREE numeaers FoR SERVICE INFORMATION CONCERNING THIS GAME, OR ANY OTHER BALLY MIOWAY GAME YOU NOW HAVE ON LOCATION.

CALL US FOR PROMPT, COURTEOUS

ANSWERS TO YOUR PROBLEMS. VIDEO === Continental U.S. 1-800-323-7182

PINBALL == Continental U.S. 1-800-323-3555 MIDWAY: 10001 west Beimont Avenue Freskin Path timers, 40131 atone Un/441-8800 u

  • COPYRIGHT MCMLXXXV BY BALLY MIDWAY MFG. CO, ALL RIGHTS RESERVED NO PART OF THIS PUBLICATION MAY BE REPRODUCED BY ANY MECHANICAL, PHOTOGRAPHIC, OR ELECTRONIC PROCESS, OR JN THE FORM OF A PHONOGRAPHIC RECORDING, NOR MAY IT BE TRANSMITTED, OR OTHERWISE COPIED FOR PUBLIC OR PRIVATE USE, WITHOUT PERMISSION FROM THE PUBLISHER. THIS MANUAL IS FOR SERVICE USE ONLY, AND NOT FOR GENERAL DISTRIBUTION. FOR PERMISSION REQUESTS, WRITE: BALLY MIDWAY MFG. CO., 10601 W. BELMONT AVE., FRANKLIN PARK, IL 60131 Printed in U.S.A.
Page 3

GENERAL INSTRUCTIONS

FOR

CRATER RAIDER

INSTALLATION

Ve

2.

3.

5. Remove keys from the taped coin return stot and untock to open the coin box door,

Remove four (4) "CARINET LEVELING LEGS" from inside the coin box.

Tip the cabinet to the side and remove the shipping cleats from Its bottom,

° Locate the threaded holes - one In each corner - and install the "CARINET LEVELING LEGS" in them,

Level the cabinet.

When finished, the cabinet should be stable tn the upright position.

Connect the 3-pronged line cord to a 3=sfot A.C, watl outlet to Insure proper grounding.

The power ON/OFF switch fs located:

UPRIGHT MONFL: On top to the teft rear of the cabinet.

TO SERVICE THE CONTROL PANEL(S)

UPRIGHT MONEL:

The contro! panel is held In place by three (3) clamps.

They are spring foaded to provide constant positive pressure on the strike plates.

AFTER turning power to the game off, they can be reached through the coin door,

To release the clamps, !ift up and toward the center of the control panel.

Once they are released, unhook them from their fatch plates. The third clamp is located near the center of the control panel.

To remove the control panel:

Raise it up and tilt {+ toward you until you can see the cable hehind it.

Cradting the control panel between yourself and the cabinet, disconnect it from Its cab{ {ng and any miscellaneous hardware.

The control panel Is now foose and may be serviced.

To reinstal{ the control panel, reverse this procedure.

Page 4

“REMOVAL OF THE MAIN-DISPLAY~GLASS

  • UPRIGHT MODEL:
NOTE: {n order to do this, the contro! panel MUST be removed first. See the "UPRIGHT MODEL" procedure.

Using the on/off switch, turn the power to the game off and remove the contro! panel.

Remove the screws which secure the main-display-glass retainer tn place and remove the retainer. This frees the main-display-glass so It can be removed.

By putting your finger in the hole In the middie of the maln-display-glass support, you can lift It up and out.

REMOVAL OF THE T.V. BEZEL ASSEMBLY

  • MPRIGHT MONEL:

WOTE: The bezel diffuser can be easily reached through the rear access door.

Using the on/off switch, turn the power to the game off and remove the rear access door,

Remove the screws that secure the bezel assembly to the T.V. monitor and the bezel diffuser may be removed.

VOLUME CONTROL’ POT / OPTION SWITCH LOCATIONS

The volume contro! pot is located, along with the credit switch and the setf-test switch, just inside the cabinet on the lteft side of the colin door frame. The option switches are located as shown in the attached P.C. Board reference drawing. For adjustment,they can be reached through the games rear access door.

To make the sounds touder, turn the volume pot clockwise as you face It.

To make the sounds fess !oud, turn the volume pot counterclockwise as you face It,

GAME OPERATION

Your new game is a one or a two player model with a color T.V. monitor. The game has five posstble modes of operation: ATTRACT, READY-TO-PLAY, PLAY, HIGH SCORE/INITIAL, and SELF-TEST.

SELF-TEST MODE

The Self-Test mode Is a special mode for checking the game switches and computer functions. It ts the most complete way of checking for proper game operation and Is quite easy to use.

The Self-Test mode may be entered at any time and from any mode of operation. Simply locate the black slide switch tnside the coin box compartment and slide It to the Self-Test position. With this switch in the Self-Test position, activate the siam switch located on the coln door, The game will enter the Self-Test mode Immediately and display the following test menuseess

~2-

Page 5

2.

3.

4.

Be

  • SELF DIAGNOSTICS
  • SOUNDS
  • PLAYER INPUT
  • ROOKKEEPING
  • MACHINE SET-UP
  • CHANNEL TEST
  • PRESET B, GRID NISPLAY

POSITION CURSOR BY MOVING JOYSTICK UP & NOWN HIT FIRE BUTTON FOR TEST

SELF DIAGNOSTICS: This test Is designed to effectively locate and identify any malfunction of the on-board computer. When selected, the game enters this mode Immediately and begins scanning the memory stored In rom and ram. If a defective component Is found during the*scan, that component and it's location will be displayed on screen. It wil! take about 15 seconds to perform the entire test.

SOUNDS: When selected, this test will display a menu of sounds. The first two selections on the menu are ALL and EXIT. tf you move the cursor to select ALL, the game will automatically perform a test of all the sounds on the menu. If you move the cursor to select EX!T, the game will exit the sound test and return to the main menu page. While In the sound test, any selection on the sound menu may be tested Individually by pos{tioning the cursor next to that sound and pressing the tire button.

PLAYER INPUT: This test is designed to confirm the operation of al! player Inputs and devices in the game. For example, when you wish to test the coin switches on the coin door, you would enter this test and activate te coin switches. if the switches are operating property, the screen will display the words COIN CHITE 1 or COIN CHUTE 2 depending on which coin switch has been activated. All inputs, contro{s, service switches, player selection buttons, etc. may be tested in the same manner, To extt this test, activate the coin door slam switch,

ROOKKEEPING: A very useful tool, this test is designed to assist you In tuning your game for your ltocation, When selected, the screen displays a complete and highly accurate account of al! games played. The {nformation displayed includes high scores, low scores, coins collected, longest and shortest games played. There Ts atso an extensive score report and time report that may be accessed by positioning the cursor next to those selections. To ex{t this test, position cursor next to EXIT and press the fire button.

MACHINE SET-UP: This test allows you to set your options with ease. When selected, a full menu of options will be displayed. A cursor appears in the teft column and fs used to select the option you wish to adjust. The cotns per credit, difficulty fevel, and # of bases, etc. are adjusted on this screen, Using the Joystick, position the cursor next to the option you want to adjust, Use the player one and player two select buttons to adjust the vatues. To exit this test, position the cursor next to EXIT and press either the player one or the player two button,

Page 6
  • CHANNEL TEST: This test Is self-functional and therefore when entered will pertorm the test automatically. It's purpose Is to test all three channels heard through the left speaker and all three channels heard through the right speaker. If any of the s{x tones are not heard during this test, you may be experiencing a sound problem, To exit this test, simply press the fire button,
  • PRESET: When selected, PRESET wil! set all Machine Set-Up options to the factory recommended vatues, In addition, It wil! reset al! bookkeeping values to zero.
  • GRID DISPLAY: This test was designed to display a crosshatch pattern used in adjusting the cofor monitor, This pattern may be used to adjust convergence, color balance, vertical tinearity, and vertical/horizontal size. To exit this test, stmpty press the fire button,

ATTRACT ODE

The Attract mode starts: “4

. Just after power has been turned on to the game,

After a Self-Test has been completed. (Pertorming a Self-Test sets the credits in the games memory to zero "0".)

After a play has been finished and there are no more credits left In the games memory.

No matter where the game [s {n the Attract mode sequence, it will immediately go to the Ready-To-Play mode display as soon as a game has been paid for,

READY-TO-PLAY MODE

1,

2.

3.

PLAY The Ready-To-Piay mode starts when enough coins have been accepted for a 1 or a 2 player game.

The Ready-To-Play mode ends when either the "1 PLAYER" or the "2 PLAYER" push button Is pressed,

t# no START button fs pressed, the displays wil! remain on the monitor screen Indetialtely.

MODE

The Play mode begins when either the "1 PLAYER" or the "2 PLAYER" start button is pressed.

The Play mode ends when all of your PLAYERS have been eliminated, when this happens, "GAME OVER" is written across the center of the monitor screen.

Page 7

HIGH SCORE/INITIAL MODE:

{f your score was high enough to become one of the game's best scores, the game wil! go into the High Score/tnitial mode immediately after the "GAME OVER" display. If your score {s not high enough to cause the game to go Into the HIgh Score/initial mode, It will eltner go to the Attract mode (if there are no more credits left tn its memory) or Into the Ready-To-Play , mode (If there are still credits left In Its memory).

Follow the ON-SCREEN Instructions to enter your Initials next to your score In the league of the best players to date.

After the High Score/Initia! mode, the game will elther go to the Attract mode (If there are no more credits left tn Its memory) or Into the Ready-To-Play mode (if there are stil! credits left In tts memory),

TWO PLAYER OPERATION

in the two player mode, the rules of play are the same as in the single player mode, There are some additional rules, however.

  • The players must take turns at the controls.
  • Your turn lasts until the pursuers eliminate your PLAYER. At this point, the game will do one of several things depending on whether or not the caught PLAYER was your last or. if you stiff have others remaining in reserve,

PLAYER ELIMINATED - OTHERS REMAINING {N RESERVE

° The GAME stops.

bs Next, the Rack changes to the Rack number the other player ts in, and what's left of the other players Rack and his PLAYER appear on the screen,

° Play then begins for the other player.

PLAYER ELIMINATED — NO OTHERS REMAINING IN RESERVE

° Game displays "GAME OVER",

° The Rack changes to the Rack number the other player is in, what's left of the other players Rack and his PLAYER appear on the monitor screen, and game play then begins for the other piayer (unless your score was high enough to cause It to go Into the High Score/tnitial Mode, in which case It will go there first and then to the remaining player so he can finish his turn).

. After the last player has finished his game, the game will efther go to the High Score/initial Mode if his score was high enough, to the Attract mode (If there sre no more credits feft tn Its memory), or Into the Ready-To-Play mode (if there are still credits left In its memory).

<-5-

Page 8

CRATER RAIDER

OPTION SWITCH SETTINGS

|AIIHITITITLIT/SWATCH NO. 1 = AT BR 3 - LOCATED ON SOUND 1/0 PLC. BOARD/S////////I// 11/1

DURING GAME PLAY: ‘SW#\ SWH2 SW#3 SW#4 SWH5 SWH6 SWE7 SWHB SW#H9 SW#I0

“NOT “NOT “NOT “NOT "NOT “NOT “NOT

USED USED USED USFD USEN USED

ATTRACT MODE SOUNDS OFF

ATTRACT MODE SOUNDS a

ONE COIN METER TwO COIN METERS

NORMAL OPERATION FREEZE VIDEO

Swet *Sw#2 *Sw#3 #S wed #* NORMAL OPERATION SOUND he ai aeNbe nie MODE

bad NORMAL OPERATION

RAM/ROM TEST INDICATES TEST RESULTS VIA

#* NORMAL OPERATION oseittare TEST

ae NORMAL OPERATION

FILTER TEST

NO EFFECT 1F SW#1 OF SWITCH NO. 3 IS IN THE "OFF" POSITION, FACTORY RECOMMENDED SETTINGS. PART NO. 4051-00A57-R007

THE REMAINDER OF YOUR NEW GAME'S MOST COMMON OPTION SETTINGS ARE CONDUCTED DURING YOUR GAME'S SELF-TEST MODE

Page 9

P. c. BOARD REFERENCE DRAWING

OPTION SWITCH "3"

+

S/S 1/0 A084-90913-AA57

OPTION SWITCH #4"

12345 67 8 ON HATER ROE, | OFF