CATHODE RAY TOMES

NBA Hangtime Kit

NBA Hangtime (ver L1.3 10/10/96) (Midway, 1996) · Kit Manual · 41 pages · 27 sections · original scan

Page 1

HANGTIME’

KIT

Information current at time of release.

Fill out and mail in game registration card. Be sure to include the game serial number. For your records, write the game serial number in the manual.

Serial Number.

Midway Manufacturing Company reserves the rights to make modifications and improvements to its products.

The specifications and parts identified in this manual are subject to change without notice.

Page 2

TABLE OF CONTENTS

Section 1 - Operation... cccccccsssssesescseeeeseseseessneneaneneneeeeaseieaseneasenensareeseeesaneesenes 1-1

Safety Notices Notice - FCC Warning Notice

Epilepsy Warning....... Conversion Procedure . Inspection Cabinet Modifications .........ccccccsessceesesestesesesessesnesesnensesesesereneeneseeeenieneneatent Tools & SUPPHieS ......cscecsesccesseseseesesesessesseesessersscensseeneneneeenecesnsenensnsereeseseraseneeess Control Panel Modifications .........sscceees

Install P.C.B. and Wiring into Jamma Cabinet Install P.C.B. and Wiring into Non-Jamma Cabinet

Game Features o.oo... cccecceecseceseesesssseseeeeecssasscscsenenenesesesesesesessceesesseseeeenseeraraeaeasacenens

Starting-Up .....seescssssssessseseteseneseeeneeeseseeeeeneneeeseeeeacneneseaesesesestecesensnecesssncereseces Player Controls Control Panel Diagram @ Menu System Operation

Operation oo. csecesssecsssesesesestsessessenesessesceeenssesnssssssessscseseensneesnsatssesarensecareneases Malin MON .........csrssarsicnevissavsevevcseneovsessorsncesenevaeseseceaserarteengenegtaqnpneseeeneraeceeneeeeee

Diagnostic Tests . Switch Test.

DIP Switch Test & Table

Video Section Testing .......eccececssscsesesesesenessessessssassseeeeesssseseeeeteeeeasaensasasenis SOuN Section Testing ..........ssesessesesssseessesseseseessscsssssssssssenesesesseeseeeneasacesees Monitor Patterns...

Run Burn-in Tes

Coin Bookkeeping Game AUdits .....cacccseicesenccisssccnavacesseienreseneveneerssersenerssaesesoesnenemennenntenereeeenenseones

Game AdjUStMent ........cccccccceesesesseseseesesessenenessensnsenssneneneeeneneenssnensneasateensenease® Standard Pricing Table . Custom Pricing. @ Utilities...

Page 3

Hardware Info..

Adjust Volume. Attract Mode Volume Adjust............c.ccccccssesccsssssscssussssessssecssuessssecssssccsseccssvssssecssuseess 1-23 Troubleshooting .................

Section 2 - Parts Information .............ccsssssssssssssesssssssssesssssssssussssessnssssasessssassueesessees 2-1

NBA HANGTIME CPU P.C.B. Drawing .......ssssssssesssssescossesssssesssssuseesasuseesssstesssssecesasees 2-2 NBA HANGTIME CPU P.C.B. Parts List.....ssscssssscsssesssssescsssesssssuesssssutsecssseesssseessssssees 223 Push Button Assembly Joystick Assembly... NOteS os eessesecsessnesseesseeneesesnecsecssessecssecsucsseeasees

Section 3 - Cabinet Wiring JAMMA Chatt.... eee Cabinet Wiring Diagram i Coin Switch and Meter Wiring ..........cscsscssssesssssseccssseccsssesssseesssssetsssssseesesstecsesavessssseeees Oe4 Control Panel Template (Player 1) Control Panel Template (Player 2) Control Panel Template (Player 3) Control Panel Template (Player 4)

©Copyright 1996 MIDWAY Manufacturing Company

Page 4

NBA. HANGTIME’ KIT

SECTION

ONE

Operation

Page 5

Safety Notices @

The following safety instructions apply to all kit operators and service personnel. Specific warnings and cautions will be found throughout this manual where they apply. We recommend that you read this page, and also all of Section One, before preparing your kit for play.

Nears

Salvaged Parts. Parts salvaged from old games are required to complete your kit. These salvaged parts must operate perfectly; otherwise, the converted game can not perform properly or safely. Always repair circuit board malfunctions and cabinet damage before conversion is attempted.

Power Supply. Be sure the power supply from your old game is capable of +5VDC at 5A, -5VDC at 1A, and +12VDC at 2A. All power supply voltages are +5%. These operating voltages are necessary for the kit. Your power supply must be FCC approved.

Monitor. This kit is not intended for use with X-Y monitors. Suitable monitors have horizontally mounted CRT-s and raster electronics with inputs for red, green and blue video, as well as

Composite Negative Sync inputs. e@

Coin Mechanism. Be sure to clean and lubricate your old coin mechanisms. Servicing them is crucial to your game's earning potential and operation.

Coin Meters. Coin meters are not provided with this kit. Wiring information is provided as a convenience to the operator.

Servicing/installing. Always turn your game OFF and unplug it before attempting to service or install your kit. Installing or repairing P.C. boards with power ON will void warranty.

ATTENTION

PROPERLY ATTACH ALL CONNECTORS. Make sure that the connectors on each printed circuit board (PCB) are properly connected. If the connectors do not slip on easily, do not force them. A reversed connector may damage your kit and void the warranty. All connectors are keyed to fit specific pins on each board.

Page 6

NOTICE - FCC COMPLIANCE STICKER

|. THIS KIT WAS TESTED IN A MIDWAY UNIVERSAL VIDEO CABINET (MODEL

40135) AND FOUND TO COMPLY WITH FCC PART 15 CLASS A

REQUIREMENTS. IF INSTALLED IN A MIDWAY UNIVERSAL VIDEO CABINET

(MODEL 40135), THE FCC COMPLIANCE STICKER (16-10139) SUPPLIED IS TO

BE PLACED ON THE REAR OF THE CABINET.

ll. INSTALLATION OF THIS KIT INTO ANY OTHER PRODUCT DOES NOT

GUARANTEE COMPLIANCE WITH FCC REQUIREMENTS. YOU ARE SOLELY

RESPONSIBLE, AND MIDWAY WILL HAVE NO RESPONSIBILITY FOR FCC

COMPLIANCE FOR INSTALLATIONS IN OTHER PRODUCTS. THE FCC

COMPLIANCE STICKER SUPPLIED SHOULD NOT BE INSTALLED ON THE

CONVERTED PRODUCT UNTIL FCC COMPLIANCE IS VERIFIED.

EPILEPSY WARNING

A very small portion of the population has a condition which may cause them to experience epileptic seizures or have momentary loss of consciousness when viewing certain kinds of flashing lights or patterns that are commonly present in our daily environment. These persons may experience seizures while watching some kinds of television pictures or playing certain video games. People who have not had any previous seizures may nonetheless have an undetected epileptic condition.

If you or anyone in your family has experienced symptoms linked to an epileptic condition (e.g. seizure or loss of awareness), immediately consult your physician before using any video games.

We recommend that parents observe their children while they play video games. If you or your child experience any of the following symptoms: dizziness, altered vision, eye or muscle twitching, involuntary movements, loss of awareness, disorientation, or convolutions, DISCONTINUE USE IMMEDIATELY and consult your physician.

1-3

Page 7

Conversion Procedure

Inspection Unpack the materials from the carton and inspect for obvious signs of damage. Use this checklist to be sure your kit is complete.

Part number A-20362 H-17833 H-17834 H-20295 03-8338-1 16-8587-825 16-9478.2 19-9922.1 16-9510 16-9511 16-10151 16-10139 16-44059-101 20-9620 20-9978-1 20-9978-3 20-10209-1 20-10209-2 20-10209-3 20-10209-7 31-1763 31-1768 31-1789 31-2393-1 31-2394 31-2397 31-2398 31-2399 31-2400 4108-01193-10B 4308-01123-24B 4408-01128-00 Item Description CPU FINAL ASSEMBLY-NBA HANGTIME CONTROL PANEL CABLE PLAYER 3 & 4 CABLE MAIN HARNESS CABLE P.C.B. MOUNTING SPACERS 1%” FBI WARNING LABEL REGISTRATION CARD EPILEPSY WARNING LABEL CREDIT DECAL TOURNAMENT LABEL CONTROL PANEL TEMPLATE FCC/CANADA WARNING LABEL MANUAL T-20 LONG ARM KEY RED JOYSTICK BLUE JOYSTICK RED PUSH BUTTON WHITE PUSH BUTTON BLUE PUSH BUTTON ORANGE PUSH BUTTON BEST VALUE DECAL NBA HOLOGRAM DECAL CLEAR OVERLAY MARQUEE INSTRUCTION CARD CONTROL PANEL HOUSING DECAL SET SIDE PANEL DECAL CONTROL PANEL OVERLAY CONTROL PANEL DECAL SET #8 X 5/8” TAMPER RESISTANT SCREW 8 -32 X 1%” BOLT 8-32 KEPS NUT Hae aa ke RRR A ae eee Oe

Ooo

Page 8

Cabinet Modifications

Recommended Tools and Supplies Black Semi-gloss Paint Electric Drill , Electric Screwdriver Grease Pencil or Marker Hex Driver 180 Grit Sandpaper or Electric Sander Pliers Razor Knife Soldering Iron and Solder Wire Cutters Black Electrical Tape Quick-hardening Wood Putty

  • Fill in gouges with a good quick-hardening wood putty. Sand cabinet and wipe it clean.
  • Repaint the cabinet with black semi-gloss paint. For games with wood grain sides: remove old decals

and clean the glue residue before painting. Allow paint to dry completely.

  • Pencil a line roughly at the top of the old graphic. Lightly moisten the cabinet with soapy water. Apply

the decal starting at the top and working down. After the decal is in place, smooth it down, taking care to squeeze out air bubbles. If an air bubble is missed, pop it with a razor blade or a pin and smooth it down.

Allow 12 hours for the adhesive on the decals to set.

  • Check the kit for an FCC sticker. If this kit is installed in a Midway universal video cabinet (model 40135), the FCC compliance sticker (16-10139) supplied is to be placed on the rear of the cabinet. Installation of this kit into any other product does not guarantee compliance with FCC requirements. The FCC compliance sticker supplied should not be installed on the converted product until FCC compliance

is verified. NOTICE - FCC COMPLIANCE STICKER

I. THIS KIT WAS TESTED IN A MIDWAY UNIVERSAL VIDEO CABINET (MODEL 40135) AND FOUND TO COMPLY WITH FCC PART 15 CLASS A REQUIREMENTS. IF INSTALLED IN A MIDWAY UNIVERSAL VIDEO CABINET (MODEL 40135), THE FCC COMPLIANCE STICKER (16-10139) SUPPLIED IS TO BE PLACED ON THE REAR OF THE CABINET.

I. INSTALLATION OF THIS KIT INTO ANY OTHER PRODUCT DOES NOT GUARANTEE COMPLIANCE WITH FCC REQUIREMENTS. YOU ARE SOLELY RESPONSIBLE, AND MIDWAY WILL HAVE NO RESPONSIBILITY FOR FCC COMPLIANCE FOR INSTALLATIONS IN OTHER PRODUCTS. THE FCC COMPLIANCE STICKER SUPPLIED SHOULD NOT BE INSTALLED ON THE CONVERTED PRODUCT UNTIL FCC COMPLIANCE IS VERIFIED.

Page 9
  • Remove viewing glass and apply the game play instruction decal to the front of the monitor bezel. Be sure the decal does not obstruct the CRT. Apply the NBA Hologram on the lower right corner of the r ) monitor bezel.
  • Place Epilepsy Warning Label on the front of the monitor bezel. Be sure that it does not obstruct the CRT screen but is in full view of the players.
  • Remove the marquee from the game cabinet and install the NBA Hangtime marquee in its place.

1-6

Page 10

Control Panel Modifications

IMPORTANT: Placement of joysticks must be horizontal to the contro! panel for proper playing capability. Use template (16-10151) from kit, as a guide.
  • Remove control panel buttons, joysticks and old contro! panel artwork.
  • Use the full control panel template to design the control panel. Separate templates are located on the last pages of this manual.
  • Plug previous holes with wood blocks, putty, cardboard or epoxy. Drill new holes as needed for joysticks and control panel buttons. File new holes smooth.
  • Carefully remove the backing on the control panel overlay. Place overlay on top of contro! panel. Prevent air bubbles from getting under overlay.

5, After the overlay is on securely, use a razor knife to trim excess and to cut holes for control panel buttons and joysticks. Then position stickers around the appropriate locations.

  • Being careful not to displace the stickers, place the clear overlay on the control panel. Use the torx head tamper resistant screws and the flat washers to attach the clear overlay to the control panel. Once the clear overlay is securely in place, cut holes for the joysticks and control panel buttons.
  • Remove switch from push button; grasp switch firmly on the left and right sides and squeeze prongs together, (do not grasp switch by the solder lugs). Carefully pull switch from housing. Unscrew nut from housing. Push switch housing through control panel from the front. Screw nut back onto switch housing from the back of the control panel. Carefully push switch back into switch housing.
  • To install the joysticks, remove the e-ring and slide the shaft and plastic ring off the joystick base. Be sure that the bushings remain in the base. Use the 8-32 bolts and the 8-32 nuts to attach the base to the underside of the control panel. Slide the plastic ring around the shaft so that the rough side is next to the shaft handle. Slide the shaft through the control panel and base. Replace the e-ring.

Joystick/Push Button Layout

ORANGE ORANGE ORANGE ORANGE

GO 6 6 Oo

BLUE JOYSTICK RED JOYSTICK

Rep Joystick

Page 11

INSTALL PC BOARD AND WIRING INTO A JAMMA CABINET

  • Replace the existing CPU board and sound board with the NBA HANGTIME CPU board. Use the 1/4” P.C.B. mounting spacers and surplus screws to secure the board to the electronic rack, or to the inside wall of the cabinet.
  • If using the JAMMA cable provided with the kit, disconnect the old JAMMA cable from the speaker, power supply, contro! panel switches (which may already be disconnected) and the coin door. Remove the cable from the game. Leave the power chassis as is. Note: If you choose to use your own JAMMA cable, check the JAMMA chart to be sure you cable is compatible.

A caution

Properly insulate any unused wires within the JAMMA cable, especially the red, orange and yellow wires. This is a fully wired JAMMA cable. Many of the wires will not be used for this kit. These wires have been installed so that you can use this cable for future kits.

The operating voltages from the power supply should be as follows:

+5V @5 Amp(Red Wires)
-5V @0.5 Amp(Yellow Wires)
+12V @2.0 Amp(Orange Wires)
Note: All power supply voltages are + 5%.
  • Connect the JAMMA cable to the CPU board. Using the Cabinet Wiring Diagram for reference, solder the correct JAMMA cable wires to the speaker. Then, connect the wires to the coin door, power supply and the control panel. Player 1 has white-’color stripe’ wires, except for the start button, which has a solid white wire. Player 2 has violet-’color stripe’ wires. Use the Cabinet Wiring Diagram in section 3 for reference when connecting these wires to the player 1 and 2 control panel switches.
  • Connect the blue-’color-striped’ wires to P12 of the CPU board. Use the Cabinet Wiring Diagram in section three for reference when connecting these wires.
  • Place the FBI Warning Label next to the CPU board. Be sure the label is completely visible.
  • Place the Copyright label next to the CPU Board. Be sure label is visible.

NOTICE - FCC COMPLIANCE STICKER

|. THIS KIT WAS TESTED IN A MIDWAY UNIVERSAL VIDEO CABINET (MODEL 40135) AND FOUND TO COMPLY WITH FCC PART 15 CLASS A REQUIREMENTS. IF INSTALLED IN A MIDWAY UNIVERSAL VIDEO CABINET (MODEL 40135), THE FCC COMPLIANCE STICKER (16-10139) SUPPLIED IS TO BE PLACED ON THE REAR OF THE CABINET.

ll. INSTALLATION OF THIS KIT INTO ANY OTHER PRODUCT DOES NOT GUARANTEE COMPLIANCE WITH FCC REQUIREMENTS. YOU ARE SOLELY RESPONSIBLE, AND MIDWAY WILL HAVE NO RESPONSIBILITY FOR FCC COMPLIANCE FOR INSTALLATIONS IN OTHER PRODUCTS. THE FCC COMPLIANCE STICKER SUPPLIED SHOULD NOT BE INSTALLED ON THE CONVERTED PRODUCT UNTIL FCC COMPLIANCE IS VERIFIED.

1-8

Page 12

INSTALL PC BOARD AND WIRING INTO A NON-JAMMA CABINET

  • Replace the existing CPU board and sound board with the NBA HANGTIME CPU board. Use the 1/4” P.C.B. mounting spacers and surplus screws to secure the CPU board to the electronic rack, or to the inside wall of the cabinet.
  • Leaving several inches of wire, cut the wires at the coin door, control panel switches (which already may be disconnected, speaker and power supply. Remove the harness from the cabinet. Leave the power chassis as is. Note: Be sure that all spliced wires are well insulated with black electrical tape.

The operating voltages from the power supply should be as follows:

+5V @5 Amp(Red Wires)
-5V @0.5 Amp(Yellow Wires)
+12V @2.0 Amp(Orange Wires)
Note: All power supply voltages are + 5%.
  • Install the JAMMA cable provided with the kit. Players 1 and 2, the coin door and the power supply wires are bundled together in individual groups. Insure that the cable is properly dressed and supported.

I caution

Properly insulate any unused wires within the JAMMA cable, especially the red, orange and yellow wires. This is a fully wired JAMMA cable. Many of the wires will not be used for this kit. These wires have been installed so that you can use this cable for future kits.

  • Connect the JAMMA cable to the CPU board. Use the Cabinet Wiring Diagram for reference and solder the correct JAMMA cable wires to the speaker. Then, connect the wires to the coin door, power supply and the control panel. Player 1 has white-'color stripe’ wires, except for the start button, which has a solid white wire. Player 2 has violet-’color stripe’ wires. Use the Cabinet Wiring Diagram in section three for reference when connecting these wires to the player 1 and 2 control panel switches.
  • Connect the blue-’color-striped’ wires to P12 of the CPU board. Use the Cabinet Wiring Diagram in section three for reference when connecting these wires.
  • Place the FBI Warning Label next to the CPU board. Be sure the label is completely visible.
  • Place the Copyright label next to the CPU Board. Be sure label is visible.

NOTICE - FCC COMPLIANCE STICKER

  • THIS KIT WAS TESTED _IN A MIDWAY UNIVERSAL VIDEO CABINET (MODEL 40135) AND FOUND TO COMPLY WITH FCC PART 15 CLASS A REQUIREMENTS. IF INSTALLED IN A MIDWAY UNIVERSAL VIDEO CABINET (MODEL 40135), THE FCC COMPLIANCE STICKER (16-10139) SUPPLIED IS TO BE PLACED ON THE REAR OF THE CABINET.

Il. INSTALLATION OF THIS KIT INTO ANY OTHER PRODUCT DOES NOT GUARANTEE COMPLIANCE WITH FCC REQUIREMENTS. YOU ARE SOLELY RESPONSIBLE, AND MIDWAY WILL HAVE NO RESPONSIBILITY FOR FCC COMPLIANCE FOR INSTALLATIONS IN OTHER PRODUCTS. THE FCC COMPLIANCE STICKER SUPPLIED SHOULD NOT BE INSTALLED ON THE CONVERTED PRODUCT UNTIL FCC COMPLIANCE IS VERIFIED.

1-9

Page 13

Game Features

NBA HANGTIME Is a one to four player game.

Starting Up Switch ON power to the game. A "rug" pattern appears on the CRT screen. When the “rug” pattern ends, the screen shows a CPU Board map. Bad chips are indicated in red, good chips are in green. The software revision level is shown at the top of the screen.

NOTE: When an error is detected during Start-up Tests, game start-up does not progress, and an error message appears on the screen.

Insert the desired amount of coins or tokens. Select which player received the credit by pressing the appropriate Start Button.

Player Controls

. Start Button Button (Orange)

. Shoot/Block Button (Red)

. Pass/Steal Button (Blue)

. Turbo Button (White)

° Joystick (Blue, Red)

©) OC O C) (rome

me ee RED JOYSTICK TURBO s001/2.0%% OC sroor/a.oe« O e On, O Orem O SHOOT/BLOCK PASS/STEAL onsen TURBO: TURBO TURBO

Page 14

Menu System Operation

OPERATION All Game Audits, Adjustments, and Diagnostics are options of the Main Menu. Each option, in turn, has its own menu, listing several choices that may be acted upon as desired.

To activate the Main Menu (shown below), press the test mode switch, or set DIP Switch #1, Switch 1 to the ON position. Game adjustments, bookkeeping, and diagnostics are all accessible from this menu.

Use any joystick to select desired menu option; press any control panel button to activate it. Notice that the options are highlighted in sequence.

Note: Only highlighted options can be activated.

~ Main Test Menu

Page 15

DIAGNOSTIC TESTS To enter Diagnostic Tests from the Main Menu, use any joystick to select the option; press any control panel button to activate.

Diagnostic Test Menu

Switch Test The Switch Test allows the operator to test the switches on the control panel and the coin door.

Select the Switch Test by using any joystick to select the option; then press any control panel button to activate. Pressing a switch on the control panel or coin door causes the corresponding switch location on the screen to light.

To exit switch test screen, press start 1 and start 2 button simultaneously.

Page 16

Dip Switch Test e@ The DIP Switch Test allows the operator to check the location of the two 8-position DIP switches on the CPU Board. The operator can also change the setting of each position of each DIP Switch during this mode.

To enter the test, use any joystick to select the option; press any control panel button to activate. The screen displays a layout of current DIP Switch settings.

To change a DIP Switch setting, move the switch to the desired setting, then check the screen to verify that the switch now shows the new setting.

Press any control panel button to exit the Dip Switch Test.

DIP Switch 1 Setting Table swi | sw2 | Sw3 | sw4 | sws | Sw6 Test Switch Off* On Powerup Test Off* On

Not Used Off* Off* Off* Off*

On On On On No Dollar Bill Validator Dollar Bill Validator Installed 4 Player Kit 2 Player Kit

@ DIP Switch 2 Setting Table

Swi | Sw2 | Sw3 | Sw4 One Coin Counter, 1Count/Coin Off* | Off* One Coin Counter, Totalizing On Off Two Coin Counters, 1Count/Coin | Off On One Coin Counter, 1Count/Coin On On Country USA Offt | Off* French On Off

German Off On

Unused On On Coinage

USA1 Gert Fri

USA2 Ger2 Fra

USA3 Ger3 Fr3

USA4Ger4Fr4
USAECAGerECAFrECA
N/UN/UN/U
N/UN/UN/U

Free Play Free Play Free Play DIP Switch Coinage CMOS Coinage *Indicates factory setting

Page 17

Video Section Testing The Video Section Test (much like the Start-up Test) allows the operator to check the RAMs and ROMs.

Highlight the Video Section Test by using any joystick to select the option; then press any control panel button to activate. When this test is activated, a "rug" pattern appears on the screen. The screen then changes to show the layout of the RAMs and ROMs on the CPU. Any chip shown as gray with a white outline should turn green during the CPU Test. During the test, chips are good if they turn green; they are faulty if they turn red.

Press any control panel button to exit the Video Section Test.

Sound Section Testing The Sound Test allows listening to some of the sounds that the game is capable of producing.

To enter the test, use any joystick to select the option; then press any control panel button to activate.

Page 18

Monitor Patterns The Monitor Patterns Test provides a menu for testing the monitor. Highlight the test by using any joystick to select the option; then press any control panel button to activate.

Monitor Patterns Menu

The RED, GREEN, and BLUE SCREEN tests fill the screen with either red, green or blue.

The COLOR BARS test fills the screen with several gradated colors to help with red, green and blue level adjustments. Each color should appear sharp and clear. A total of 15 colar bars should be displayed.

The CROSSHATCH PATTERNS test fills the screen with a grid and should be clear.

If any of the Monitor Pattern Tests shows a need for adjustment, use the proper controls on the Monitor Board.

Run Burn-in Test The Burn-in Test continually repeats the Video Section Test. Use any joystick to select the option; then press any control panel button to activate. When the Burn-in Test detects an error, the test stops and displays an error message on the screen. Use this test to find intermittent CPU problems.

RUN BURN-IN TEST ARE YOU SURE?

To exit this test, switch the game OFF then ON again.

Page 19

COIN BOOKKEEPING The Coin Bookkeeping Table records the coin box totals and game play counters. The left side of the table names the bookkeeping item; the right side shows the number of coins, credits or plays for each item.

Highlight Coin Bookkeeping by using any joystick to select the option; then press any control panel button to activate.

NEXT AUDIT PAGE RETURN TO MAIN MENU — Coin Bookkeeping Table

GAME AUDITS The Game Audits Table records the game play statistics. The left side of the table names the Audit item; the right side shows the amount of play.

RETURN TO MAIN MENU Page 1 of Audit Table

1-16

Page 20

GAME AUDITS Continued

Page 21

GAME ADJUSTMENTS The Game Adjustment menu option allows the owner/operator to change the Game Pricing and Game Difficulty. The activated item provides a setting choice. Highlight setting choice with any joystick, then press any button to lock setting.

Standard Pricing Standard Pricing allows the operator to choose any of the "Standard" selections for the Standard Pricing Table.

Custom Multipliers Customize the internal coin chute multipliers for each chute.

Custom Pricing Custom Pricing allows the operator to install pricing other than that of the Standard Pricing Table. Custom Pricing also allows the operator to select the amount of credits required to start a game and the amount of credits required to continue a game. This option is enabled via the Dip Switch Settings (set Dip Switch 2, SW8 to ON). The game must be set for CMOS Coinages for this feature to work.

Free Play This option selects free play. The setting choices for this adjustment are: -No (factory) -Yes

Player Head Size This controls the head size for players in the game. -Normal Size: 1 (factory) -Large Size: 2

Page 22

Drone Difficulty This controls the skill level of the computer controlled players. -Easiest Setting: 1 -Hardest Setting: 5 -Factory Setting: 3

Game Timer Speed Game Timer allows the operator to control the overall game timer speed. The settings for the adjustment are: -Slowest Setting: 1 -Fastest Setting: 5 -Factory Setting: 3

Credits for Full Game Allows purchasing a full game at a discount from normal start/buyin pricing. -Minimum Setting: 4 -Maximum Setting: 16 -Factory Setting: 8

Game Win Bonus Allows the winning team to play the next game for free. Only the challenging team pays. -On (factory)

Computer Assistance When enabled, computer keeps game scoring close. Factory Setting: Enabled

Tournament Mode When in Tournament Mode, CPU assistance is turned off and no power-ups or special guests are allowed! No Cheating! Factory Setting: Disabled

Attract-Mode Sounds Determines whether the game will make sounds in the attract mode. The settings for the adjustment are: -On -Off (factory)

Trivia Contest Determines whether the game will allow the Trivia Contest at Game Over. -On factory) -Off

Page 23

Standard Pricing Table

NAMESettings CrediticoinCOINCOINZCOINS | COINSBill
USAT1125¢(2 to Start; 2to Continue) | 25¢25¢$1.00
UsAz1125¢(2 to Start; 1 to Continue) | .25¢25¢$1.00
USA1125¢(1 to Start; 1 to Continue) | .25¢25¢$1.00
USA41/50¢, 3/$1.00(1 to Start; 1 to Continue)25¢25¢$1.00
USAS1/50¢, 4/$1.00(2 to Start; 1 to Continue) | 25¢25¢$1.00
USA81150¢(1 to Start 1 to Continue) | 25¢25¢$1.00
USA?1/508, 3/$1.00(1 to Start; 1 to Continue) | .25¢25¢$1.00
USAB1/50¢, 4/$1.00(2 to Start; 2 to Continue)25¢25¢$1.00
usag1/25¢, 4/$1.00(2 to Start; 2 to Continue)| 25¢25¢$1.00
USA101/25¢, 4/$1.00 (3 to Start; 2 to Continue)25¢25¢$1.00
USA ECA,1/25¢, 4/$1.00_(3 to Start: 3 to Continue) _| $1.0025¢jo¢05¢$1.00
GERMAN11/1DM, 6/5DM1DM5DM
GERMAN24/1DM, 7/5DM4DM50M
GERMAN31/1DM, 8/5DM1DM5DM
GERMAN41/1DM, 5/5DM1DM5DM
GERMANS4/DM, 6/5DM1DM50M
GERMAN ECA4/1DM, 2/2DM, 6/5DM5DM20M1DM
FRANCE?2I5F, 5/10FoF10F
FRANCE22I5F, 4M0F5F10F
FRANCE3ASF, 3/10FSF10F
FRANCES4/5, 2M10FoF10F
FRANCES2/5F, 5/10F, 11/2 X 10FSF10F
FRANCES2I5F, 4/10F, 912 X 10FSF10F
FRANCE74/SF, 3/10F, 7/2 X 10FoF10F
FRANCES1/SF, 2/10F, 5/2 X 10FSF10F
FRANCES4/3 X 1F, 215F1F5F
FRANCE10412 X 4F, 3/5F1F5F
FRANCE114/3 X 4F, 2I5F, 5/2 X SF1FSF
FRANCE1212 X 1F, 3/SF, 7/2 X SF4FSF
FRANCE ECA4/3 X AF, 2/5F, 5/2 X 5FSF10F20F
‘CANADAT2X25¢., 3187.0025¢$1.00$7.00
SWISSTTHF, G/F1FoF
SWiss24NF, TSF1FSF
SWISS3A/F, B/SF.1FSF.
ITALYT/S00LIRESOOLIRE | S00 LIRE
UKT1/20P, 3/50P.20P50P
uK22/20P, 5/50P20P50P
UK ECA11/20, 3/50P, 7/£1.00£1.0050P20P10P
UK ECA21/20P, 3/50P, 7/£1.00£1.0050P20P10P.
UK ECA34/30P, 2/50P, 4/£1,00£1.0050P20P10P
UK ECA41/30, 2/50P, 5/£1.00£1.0050P20P10P.
UK ECASAISOP, 2/£1.00£1.0050P20P:10P
UK ECA6+/50P, 3/81.00£1.00S0P20P10P
UK ECA7£1.00£1.0050P20P40P
UK ELEC WICCU1/30P, 2/50P, 4/£1.00£1.00CCU
‘SPAIN1iH /400PESETA, 6/SOOPESETAHOOPESETA |500PESETA
SPAIN2H/100PESETA, S/SOOPESETAHooPESETA [s00PESETA
AUSTRALIAT1/3X20¢, 2/$1.0020¢$1.00
AUSTRALIA24/5X20¢, 1/$1.0020¢$1.00
JAPANTHOOYEN|100 YEN | 100 YEN
JAPAN22/1 00YEN100 YEN | 100 YEN
AUSTRIA4/SSCHIL, 2/10SCHIL5 schilling10 schilling
AUSTRIA24/2X5SCHIL, 3/2X10SCHIL5 schilling | 10 schilling
BELGIUM1720F20F20F
BELGIUM23/20F20F20F
BELGIUM32/20F20F20F
BELGIUM ECA1/20F50F20FSF.
‘SWEDENT/3K1KRONA, 2/5KRONA1 KRONA _| 5 KRONA
NEWZEALAND1 | 1/3X20¢20¢20¢
NEW ZEALAND2 | 1/2x20¢20¢20¢
NETHERLANDS | 1/1HFI, 3/2 5HFITHF25H
FINLANDTIMARKKATMARKKA_|1MARKKA
NORWAY12K KRONE, 3/5K1KRONEKRONE | 1KRONE

DENMARK T/2K1KRONE, 3/SKRONE, T/2XSKRONE | 1 KRONE | 5 KRONE

ANTILLIES1/25¢, 471GUILDER256GUILDER
HUNGARY,2X 10FORINT, 3/2X20FORINTTOFORINT | 20FORINT

1-20

Page 24

Custom Pricing

(2) (3) (4) (5) (6) (7)

(8) (9)

(10) Custom Pricing Menu

Coins inserted accumulate units. This adjustment specifies the number of units given for each coin in the left, right, 3rd, 4th, or bill validator chute (see “units/credit"). This is the number of coin units required to buy one credit. One bonus credit is awarded after this many coin units have accumulated. No credits will be awarded until this many coin units have accumulated. Each player needs this many credits to begin a game. Each player needs this many credits to continue a game. Whenever standard pricing is used, a corresponding message is displayed on the credits screen. Setting this to no disables the message. When set to yes, fractional credits will be seen on the credits screen. The detailed bookkeeping screen shows total collections based on this many coins per dollar. (Set to zero to disable the display of money totals.) This is the limit for the credits counter. Additional coins inserted will be lost. Factory setting is 30.

1-21

Page 25

UTILITIES The Utilities Menu allows the owner/operator to clear the games bookkeeping memory and to install a r ) custom message. Highlight selection with any joystick, then press any button to lock setting.

Utilities Menu

After an item has been activated, you are given the option of resetting that item or not. For example:

CLEAR CREDITS? ARE YOU SURE?

Highlight setting choice with any joystick, then press any button to lock setting and return to the Utilities Menu.

HARDWARE INFO Displays the name of the game, the serial number and manufacture date.

NBA® HANGTIME™

SERIAL NUMBER: XXXXXX

DATE OF MANUFACTURE: MONTH, DAY, YEAR

Press any control panel button to exit to the main menu.

1-22

Page 26

ADJUST VOLUME Move any joystick up to increase, or down to decrease the sound level of the game. Press any control panel button to lock the volume level and return to the Main Menu.

Press any control panel button to exit to the main menu.

ATTRACT MODE VOLUME ADJUST Move any joystick up to increase, or down to decrease the sound level in the Attract Mode. Press any control panel button to lock the volume level and return to the Main Menu.

Press any control panel button to exit to the main menu.

1-23

Page 27

Troubleshooting

PROBLEM

NO PICTURE OR DISTORTED PICTURE.

TURN GAME ON & NOTHING HAPPENS.

NO SOUND.

NO GENERAL ILLUMINATION

PRESS START BUTTON AND NOTHING HAPPENS.

NO CREDIT GIVEN WHEN COINS ARE INSERTED.

TOO MANY CREDITS FOR NUMBER OF COINS INSERTED.

GAME STAYS IN THE TEST MODE.

GAME OPERATES INCORRECTLY. INTERMITTENTLY OR POSSIBLE SOLUTION

Check for faulty video board or monitor. Check for disconnected video signal cable.

Check line fuse. Check for +5VDC at pins C, D, 3, and 4 of the JAMMA Connector. Check to see that the proper AC line voltage is selected for Switching Power Supply operation.

Check the speaker and speaker connection to pins L and 10 on the JAMMA Connector. Check volume control setting. Check for +12VDC at pins F and 6 on the JAMMA connector, also -5VDC at pin 5. Check interboard wiring on CPU Board.

Check cabinet wiring for open connections to G.I. bulbs. Check G.1. fuse, if present.

Check for open wires between the button and CPU Board. Check for contamination on CPU Board pins or the button switch blade contacts. Check for proper ground.

Check for contamination on coin switch contacts. Check for an open wire between Coin Switch 1 and pin 16 on the JAMMA Connector or Coin Switch 2 and pin T of the JAMMA Connector.

Check Game Pricing setting. Check for a Short between pins T and 16 on the JAMMA Connector.

Check that the Test Switch in the coin door and the Test Switch (Position 1) on DIP Switch 2 are set to Off.

Check for proper Power Supply voltages: +5 + 0.25V +1241.2V -5 + 0.25V

1-24

Page 28

NBA.

HANGTIME’

KIT

SECTION

TWO

Parts Information

Page 29

A-20362 NBA HANGTIME CPU Assembly

us

epee teal frewgge|

2-2

Page 30

A-20362 NBA HANGTIME CPU Assembly

PART NUMBERDESCRIPTIONLOC _|Qry
5880-1 1056-00BATTERY 3V_LITHIUMBi1
A-20255SOUND PLD _ASSY NHLUS7 | 1
A-e0eS7ASSY PLD 7032 44PJCC 1 Sn$U35_| t
A~20258ASSY PLD 7064 64PJCC 1 Sn$U45 [1
A-20259ASSY PLD 7064 64PJCC 1 Sn$U47 |i
A~5343-40059-2ASSY_EPROM NBA MUSTC/SPCHUei
A~5343-40059-3ASSY EPROM NBA MUSIC/SPCHU31
A-5343-40059-4ASSY EPROM NBA MUSEC/SPCHU41
A~5343-40059-5ASSY EPROM NBA MUSTC/SPCHUS1

A-5343-40059-10 | ASSY EPROM NBA GAME IMAGE Uilee| 1 A-5343-40059-11 | ASSY EPROM NBA GAME IMAGE Ule3| 1 4-5343-40059-12 | ASSY EPRUM NBA GAME I MAGE, Ule4] 1 A-5343-40059-13 | ASSY EPROM NBA GAME I MAGE, ures] 1 A-5343-40059-14 | ASSY EPROM NBA GAME I MAGE Uie6| 1 A-5343-40059-15 | ASSY EPROM NBA GAME I MAGE. Ule7] 1 A-5343-40059-16 | ASSY EPROM NBA GAME IMAGE Ule8| 1 A-5343-40059-17 | ASSY EPRUM NBA GAME I MAGE, Ule9] 1 A-5343-40059-18 | ASSY EPROM NBA GAME I MAGE U130] 1 A-5343-40059-19 | ASSY EPROM NBA GAME IMAGE, Ul3t | 1 A-5343-40059-20 | ASSY EPROM NBA GAME IMAGE Ul32] 1 A~5343-40059-21 | ASSY EPROM NBA GAME I MAGE U133] 1 A-5343-40059-28 | ASSY EPROM NBA GAME _I MAGE Ulel| 1 A-5343-40059-29 | ASSY EPROM NBA GAME IMAGE Uie0] 1 4-5343-40059-30__| ASSY EPROM NBA GAME IMAGE Ul19] 1

A-5343-40059-31__|ASSY EPROM NBA GAME _I MAGEUi18] 1

A-5343-40059-24 | ASSY EPROM NBA GAME IMAGE Ui13] 1 A-5343-40059-25 | ASSY EPROM NBA GAME I MAGE Ui12] 1 A-5343-40059-26 | ASSY EPROM NBA GAME IMAGE Ulit| 1 A~5343-40059-e7 | ASSY EPROM NBA GAME I MAGE UL10} 1 A-5343-40059-ce | ASSY EPROM NBA PROGRAM U54_| 1 A-5343-40059-e3 | ASSY EPROM NBA PROGRAM U63 [1

2-3

Page 31

PUSH BUTTON

PLUNGER

PART NUMBER / COLOR TABLE PART # 20-10209-1 20-10209-3 20-10209-3 20-10209-7

SPRING

BEZEL

NUT

SWITCH

2-4

Page 32

JOYSTICK

95-0193-00 - RED 95-0193-02 - BLUE 95-0193-06 - BLACK KNOB & SHAFT 95-0191-00

95-0204-06 - BLACK 95-0204-00-RED 95-0204-02 - BLUE SHORT SLEEVE ben | , | 95-1309-00

95-0196-00 - RED-+95-0194-00SPRING

95-0196-02 - BLUE PIVOT CYLINDER 4

95-0196-06 - BLACKf95-0199-00
LONG SLEEVE95-0195-00Z-STOP
|WASHER95-0192-00

_ a SWITCH BRACKET = — 90-1020-00 (4)

||Late|SCREW

{ . G- 95-0198-00 oS LH @&

BUSHING||95-0733-01

! MICROSWITCH

|fSILVER

43-0019-00 | --“90-1012-00

E-RING—SCREW

2-5

Page 33
Scan of page 33

This page is a drawing, shown as the original scan.

Page 34

JAMMA CHART

FunctionWire ColorPinPinWire ColorFunction
GroundBlack1A| BlackGround
GroundBlack2Black
+5 Volts DC3Red+5 Volts DC
+5 Volts DCRed4Red+5 Volts DC
-5 Volts DCYellow5Yellow-5 Volts DC
+12 Volts DCOrange6Orange+12 Volts DC

Counter 1 Brown foo} Brown-Red Counter 2

NC NC

Speaker (+) Red-Gray Brown-Gray Speaker (-) NC

Video Red Yellow/Red NC

Yellow/Green Video Green

Video BlueYellow/BlueYellow/WhiteVideo Sync
Video GroundYellow/BlackWhite-GrayService Credit

Test Black-Blue Black-Green Slam Tilt

1 CoinBlack-BrownBlack-Red2 Coin

1 Start White Violet-White 2 Start White-Black 1 Up

1 Left White-Red Violet-Black 2 Up Violet-Brown

Violet-Red

1 Right White-Orange Violet-Orange | 2 Right 1 Shoot/Block White-Yellow Violet-Yellow 2 Shoot/Block 1 Pass/Steal White-Green Violet-Green 2 Pass/Steal

1 Turbo White-Blue o| »| N| <| x! S| <] cl A] wm! a] ol] 2] =} -] A} Cc] zr] mm] mo} Oo] ow

Violet-Blue 2 Turbo

Ground

3-2

Page 35

TAVIS _—“NWD.

$6z02-H 3160 SSINAWH NN

Page 36

COIN SWITCH AND METER WIRING

OPTION 1

COIN SWITCH 1 oOo COIN SWITCH 2 aA METER

JAMMA PIN 16

GROUND

OPTION 2

COIN SWITCH 1 oo COIN SWITCH 2 on SWITCH

JAMMA PIN 16 COIN

= 1 METER| JAMMA PIN T

GROUND

!!WRONG WAY!! Do not connect the coin switches in this manner. This circuit is INCORRECT, and will cause twice as many credits per coin.

COIN SWITCH 1 on COIN SWITCH 2 on

= JAMMA PIN 16

> JAMMA PIN T GROUND

3-4 JAMMA PIN &

+5V

JAMMA PIN & ef

Page 37

CONTROL PANEL TEMPLATE PLAYER 1

HOLE LEGEND.

1.19 DIA. HOLE THRU, PA | 1.25" HOLE THRU, C'BORE 3.00" X.090 DEEP (+.031, -0.00) ON NEAR SIDE .22” HOLE THRU, .75” C'BORE X .063” DEEP

O O

Page 38

CONTROL PANEL TEMPLATE PLAYER 2

HOLE LEGEND SIZE [49 DIA. HOLETHRU TA ee a DEEP (+.031, -0.00) ON NEAR SIDE .22" HOLE THRU, .75”" C’'BORE X .063” DEEP HOLE

Lo

oO Pa So

Page 39

CONTROL PANEL TEMPLATE PLAYER 3

A HOLE LEGEND

SIZE HOLE 1.19 DIA. HOLE THRU A 7.25" HOLE THRU, C'BORE 3.00" X .090 B DEEP (+.031, -0.00) ON NEAR SIDE 32" HOLE THRU, 75" CBORE X 063" DEEP [| C

nN C/ 1?)

O /

q

Page 40

CONTROL PANEL TEMPLATE PLAYER 4

HOLE LEGEND SIZE HOLE 1.19 DIA. HOLE THRU 1.25" HOLE THRU, C’BORE 3.00” X .090 DEEP (+.031, -0.00) ON NEAR SIDE .22” HOLE THRU, .75" C’BORE X .063" DEEP

Page 41

WARNINGS & NOTICES

Warning USE OF NON-MIDWAY PARTS OR CIRCUIT MODIFICATIONS MAY CAUSE SERIOUS INJURY OR EQUIPMENT DAMAGE! USE ONLY MIDWAY AUTHORIZED PARTS.
  • For safety and reliability, substitute parts and modifications are not recommended.
  • Substitute parts or modifications may void FCC type acceptance.
  • This game is protected by federal copyright, trademark and patent laws. Unauthorized modifications may be illegal under federal law. This also applies to MIDWAY logos, designs, publications and assemblies. Moreover, facsimiles of MIDWAY equipment (or any feature thereof) may be illegal under federal law, regardless of whether or not such facsimiles are manufactured with MIDWAY components.
Warning
NOTE: This equipment generates, uses and can emit radio frequency energy and, if not installed properly and used according to the directions in this manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of part 15 of FCC rules which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference to radio communications, in which the user, at his or her own expense, will be required to take whatever measures may be needed to correct the interference.
Warning Prevent shock hazard and assure proper game operation. Only plug this game into a properly grounded outlet. Do not use a cheater plug to defeat the power cord's grounding pin. Do not cut off the ground pin.

NOTICE - FCC COMPLIANCE STICKER

|. THIS KIT WAS TESTED IN A MIDWAY UNIVERSAL VIDEO CABINET (MODEL 40135) AND FOUND TO COMPLY WITH FCC PART 15 CLASS A REQUIREMENTS. IF INSTALLED IN A MIDWAY UNIVERSAL VIDEO CABINET (MODEL 40135), THE FCC COMPLIANCE STICKER (16-9306) SUPPLIED IS TO BE PLACED ON THE REAR OF THE CABINET.

Il. INSTALLATION OF THIS KIT INTO ANY OTHER PRODUCT DOES NOT GUARANTEE COMPLIANCE WITH FCC REQUIREMENTS. YOU ARE SOLELY RESPONSIBLE, AND MIDWAY WILL HAVE NO RESPONSIBILITY FOR FCC COMPLIANCE FOR INSTALLATIONS IN OTHER PRODUCTS. THE FCC COMPLIANCE STICKER SUPPLIED SHOULD NOT BE INSTALLED ON THE CONVERTED PRODUCT UNTIL FCC COMPLIANCE IS VERIFIED.

Notice No part of this publication may be reproduced by any mechanical , photographic, or electronic process, or in the form of a phonographic recording, nor may be transmitted, or otherwise copied for public or private use, without permission from the publisher.

For Service: Call your Authorized MIDWAY Distributor.

©1996 Midway® Manufacturing Company. All rights reserved. The NBA® and individual NBA® Team identifications used on or in this product are trademarks, copyrighted designs and other forms of intellectual property of NBA® Properties, inc. and the respective Teams and may not be used, in whole or in part, without the prior written consent of NBA® Properties, Inc. © NBA® Properties, Inc, All rights reserved.

MIDWAY MANUFACTURING COMPANY 3401 N. CALIFORNIA AVE. CHICAGO, ILLINOIS 60618

Entire contents of this manual copyright © 1995 MIDWAY Manufacturing Company. All rights reserved.