VS Castlevania
Vs. Castlevania (Konami, 1987) · Document · 2 pages · original scan
VS. CASTLEVANIAT OPERATION MANUAL MDS (MGS)
- How to Install Sub PCB Software
For VS. Dual System (Two Monitors):
If "VS. Castlevania" is to be installed in main (left) side of cabinet, then remove existing PPU and CPU Chip (2A03), Locations 2F and 2J on CPU PCB, and existing EPROMS in Locations 1A, 1B, 1C, 1D, 2A, and 2B. For Sub (right) side, use Locations 8F and 8J, and EPROMS in Locations 6A, 6B, 6C, 6D, 8A, and 8B.
Insert "VS. Castlevania" Sub PCB to the two bare 40-Pin DIP IC Sockets on CPU PCB. Location 2F and 2J for the main (right) side or 8F and 8J for the Sub (left) side.
Firmly insert Sub PCB into IC Socket in order to prevent failures.
Carefully check all 40-Pins for proper connections.
Insert CPU Chip 2A03 to 40-Pin Dip IC Socket, Location U8 on Sub PCB, with the chips in the same direction as the other ICs on the Sub PCB.
Insert PPU to 40-Pin DIP IC Socket, Location U6 on Sub PCB, with the chips in the same direction as the other ICs on the Sub PCB.
For VS. UniSystem (One Monitor):
"VS. Castlevania" Sub PCB must use Locations 8F and 8J (Sub side).
OascoerFH I KULMNPR pecen------------5 Lael ween nee -—-- SE ‘SW! corresponds to this program, MAIN (Lett side for two monitor geme--Not used for one monieor game)
‘SW2 corresponds t0 this program, SUB (Right side for two monvtor geme--Alsa used for one monitor game) @) |
*Castlevania is a Trademark of Konami Inc.
2. Points and methods of adjustment
Game Option Settings MDS PC. Board
MDS-CPU
SW1.-MAIN (Left side for two monitor game — Not used for one monitor game) SW2---SUB {Right side for two monitor game
- Also used for one monitor game) MDS FOR VS. CASTLEVANIA SW4 (SW2) 1t[2{3[a[{[sjfel]7]sa Coin/Credit 414 | OFF | OFF | OFF 412 | OFF | OFF | ON 413 | OFF | ON | OFF 214 | OFF | ON | ON 3/1 | ON | OFF | OFF 4/1 | ON | OFF | ON 5/4 | ON | ON | OFF Free Play ON | ON | ON Number of Lives 3 OFF ; 2 ON Bonus lO EEN OFF | OFF Ohm tbo OFF | ON Heer x 80 ON | OFF Qimar + 9 on | ON Easy OFF Hard ON Sotto sore Be OFF
®Factory Suggested Settings