CATHODE RAY TOMES

Centipede Caberat DP-189-1st-02B

Centipede (revision 4) (Atari, 1980) · Drawing Package · 1 pages · original scan

Page 1
Scan of page 1

Option Input Circt

Joystick Circuitry

wane sates O-

me ©

uitry

lle le Lele Aral

Testing the Option Switches

Perform the CAT Box preliminary setup.

Set the CAT Box switches as follows: BUS SOURCE to DATA BYTES tot RW to READ. Key in address 0800 (N9) or 0801 (NB) MODE to CONTINUOUS

‘Activate the switch while monitoring the DATA DISPLAY. The DATA DISPLAY will change ifthe switch is operating propery

Sheet 2, Side 8 Dpst6062 «et priating ‘Centipedtcaberet, A.

ATARI

Sheet 2, Side B

Centipede”

Trak Ball™ Circuitry Player Input Circuitry Video Output Circuitry Audio Output Circuitry Coin Counter Output Circuitry Option Input Circuitry High Score Memory Circuitry

Section of 03742101 B TTolFrom MPU Data Bus Sheet 1, Side B Player Input Circuitry

sans Ej}

Coin Counter Output Circuitry Testing the Player Inputs

  • Perform the CAT Box Preliminary Setup.
  • Set the CAT Box switches as follows: ‘a. DBUS SOURCE to DATA b. BYTES tot cc RUW to READ
  • Key in address 0000 (self test switch nly) or 0601 (all others e, PAW MODE to CONTINUOUS
  • Activate the following player input switch 8, one at a time, while monitoring the DATA DISPLAY:
  • Coin Right ». Coin Lett ©. SLAM
  • FIRE @. START f. START 2 4, The DATA DISPLAY will change if the switches are operating properly

< Denotes a test point Testing the Audio Outputs

  • Perform the CAT Box preliminary setup.
  • Set the CAT Box switches as follows: From pu Address Bus Sheet 1, Side 8 sol ~

TolFrom MPU

Sheet 1, Side B ‘a. DBUS SOURCE to DATA b. BYTES to 1 ©. RAW to WRITE

  • Key in address or press ADDRESS INCR f@. Press DATA SET 1 Key in data
  • RAW MODE to SINGLE ADDRESS DATA RESULTS 100F ra 100F 03 1000 55,
1001AFPure tone is heard from channel t output.
100100Channel 1 output is turned off.

1002 55

1008AFPure tone is heard from channel 2 output
1008(00Channel 2 output is turned oft

1008 55,

1005AFPure tone is heard from channel $output.
100500Channel 3 output is turned off

1006 55,

1007AFPure tone is heard from channel 4 output
100700Channel 4 output is turned off

Audio Output Circuitry

lols bole ROR RRS goReeaey risk RR

Coin Counter Output Circuit

This circuit consists of coin counter drivers 6, Q7, and QB and data latch M10. The circu is addressed by the MPU on ABO-AB2 and written by the MPU. ‘on data line DB7. When the input to a driver is clocked high, its collector goes Tow grounding the return of the coin counter in the coin door. ‘The video output circult receives motion object, playtiold, ad dress and data inputs and produces a video output to be displayed on the game monitor. In order to read out of the color RAM, GRYO and GRY1 trom the motion object circuitry are mut: tiplexed with AREAO and AREAI trom the playfield circuit by E. ‘The output, selected by GRYO or GRY1, Is RAMAO-RAMA3 (RAM ADDRESS).

RAMA0-RAMA3 are applied to color RAM C8. The colors red, ‘green, blue and an alternate color bit are outputs. The three co! Or bits are latched by AB as the game video in the three basic Colors (or shades of gray in a black and white monitor. When the alternate color bit (C8 pin 11) s active, an altemate shade of blue or green is available.

Te following conditions, along with the various combina tions of COLOR 1 (red), COLOR 2 (green) and COLOR 3 (biue), Provide 6 extra colors for a total of 14

  • IAB pin 11 is low, transistor Q5 conducts and draws cur ‘ent from COLOR’. The result isa pale blue when COLOR. 1 and COLOR 2 are off
  • If AB pin 10 is low, transistor Q4 conducts and draws cur font from COLOR 2. The result is a pale green when COL- (OR 1 and COLOR 3 are off © coon: (naoy

Trak Ball™ Circuitry

oereey

Testing the Trak Ball™ Inputs

  • Perform the CAT Box Preliminary Setup,
  • Set the CAT Box switches as follows: ‘a. DBUS SOURCE to DATA b. BYTES 101 ©. IW to READ Kay in adress 0000 (ate o 0002 (norzonta MODE to CONTINUOUS
  • Spin the TRAK Ball™ while monitoring the DATA DISPLAY. The DATA DISPLAY will change it the TRAK Ball input is operating property High Score Memory

The High Score Memory circuit stores the three best scores and other pertinent informa tion. These scores are saved even if power is, ‘emoved from the game. The High Score Mem cory circuit consists of an erasable reprogrammable ROM E5, latches E4, H4, J4, buffer HS and timer Att

Atl produces a 0-1SV square wave at a 1V rate. This signal, when + 15V, forward biases ‘diode CRS and allows capacitor C86 to charge to ~ 29V. When the signal is OV, CRS is cutoff ‘and OR4 is forward-biased which causes C84 to develop a charge. C84 charges to approxi mately ~ 28V. Ths is the potential required for EAROM C0 to operate,

‘The MPU addresses the EAROM (ABO-ABS) when a low EAADDR gates WRITE? at gate Ad The trailing edge ofthe gated pulse latches the address information to the EAROM ES via Ja Data is latched by H4 at the same time. The EAROM mode (read, write or erase) is deter. ‘mined by DB0-DBS at latch Es. A low EACON- TROL gates at gate Ad. The trailing edge of this gated pulse latches the data into the EAROM E5 via latch Ha,

Data_is read from the EAROM when EAREAD on pin 1 of butter Ha goes low. From MPU Address Bus Sheet 1, Side B

goRgeees