Smashing Drive NYC IIxM Sit Down
Smashing Drive (World) (Gaelco, 2000) · Manual · 52 pages · 31 sections · original scan
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
important
Sections before operating game
photographic, or
process, Weep np inc ig Rte nor may it be stored in Saeco transmitted, ee te ee an without |
SMASHING DRIVE ~ OPERATOR'S MANUAL
About SMASHING DRIVE
Thank you for purchasing this Namco America Inc. product. This manual expiains how to safely operate your game machine. Failing to operate the machine correctly could result in malfunction or accident, so please read the manual carefully before commencing operation
Unauthorised reproduction of this document or any of its contents is strictly forbidden, without permission from Namco America Inc.
© 2000 Gaelco S.A. - All rights reserved
Copyright law and industrial property law protect the contents of this game, its main data and design.
Published by: Revised by: GAELCO S.A. NAMCO AMERICA Escipié 9-11 08023 Barcelona - SPAIN Tel. ++3493 417 36 26 Fax ++34 93 417 28 02 e-mail gaelco@gaelco.com web wvww.gaelco.es
FCC Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part A of the FCC Rules. These /imits are designed to provide reasonable protection against harmful interference when the equipment is operating in a commercial environment. This equipment uses, and can radiate radio frequency energy, if not installed and used according to the instruction manual, and may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
SMASHING DRIVE - OPERATOR'S MANUAL
SMASHING DRIVE - OPERATOR’S MANUAL
INDEX
- GENERAL INFORMATION 1.1 Manufacturer and Machine di 1.2 Legislation references. 1.3 Technical Service. 1.4 Responsibility.
- SPECIFICATIONS. 2.1 Description of the game. 2.2 Dimensions and weight 2.3 Power Supply.
- PREVENTIVE MEASURES. 3.1 Siting of the machine. ODOKKMOANANNANDRMMOOKAN
4.5 Movement of the unpacked machine.
- INSTALLATION AND SETTING UP. 5.1 Inspections.......... 5.2 Machine assemblin 5.3 Assembly of the platform to the monitor cabinet 5.4 Switching the MACHING ON.......sssssssssessssssseeeesees
- PROGRAMMING THE MACHINE AND TEST MODE..
- MAINTENANCE............ 9.1 Steering Wheel verification. 9.2 Fuse replacemert...... 9.3 Steering Wheel access.. 9.4 Vibrator access....... 9.5 Basic troubleshooting.
- PARTS LIST........0+« 10.1 Plastics and attachments. 10.2 Back view of the monitor cabinet
10.8 Vibrator...
- WIRING DIAGRAMS
SMASHING DRIVE - OPERATOR'S MANUAL
SMASHING DRIVE - OPERATOR’S MANUAL
- GENERAL INFORMATION
Manufacturer Namco America Inc. Address 2055 Junction Ave. 21P 95131
Address 2055 Junction Ave City San Jose
Country : CA Tel. (408) 383-3900 Fax (408)383-0130
Name of the game SMASHING DRIVE Model sD
1.2 Legislation references
Smashing Drive is UL listed.
SMASHING DRIVE - OPERATOR'S MANUAL
1.3. Technical Service
Technical Service is carried out by Namco America.
1.4 Responsibility
Any modifications made to this machine that are not authorized in writing by the manufacturer will be considered to be at the exclusive responsibility of the customer, who will consequently become the new “manufacturer” and must operate in compliance with the UL directive. In case of an accident caused by a defective part, the manufacturer will assume responsibility only if the machine was defective in its original condition. However, this responsibility shall be diminished or even totally annulled if the operator or the player do not follow the instructions provided or if the operator uses spare parts that are not covered by guarantee, are not authorized in writing or do not correspond to the specified technical characteristics.
- SPECIFICATIONS
SMASHING DRIVE is an arcade game based on the frantic driving of a “super-cab” in New York City. The taxi driver picks up a client and races trough NY trying to avoid traffic jams and obstacles, discovering many surprising shortcuts and getting extra advantages distributed at points along the course, that convert the cab in a fantastic car worthy of Batman or James Bond. Almost everything is permitted but the car looses speed when smashes against an obstacle, so bad drivers would be punished with rather poor scores. The goal of the player is to complete the selected circuit in the least possible time, dodging the obstacles that cut across his path, at the same time keeping a fierce competition with another cab controlled by the CPU. Two players can also compete one against each other when the machines are linked.
2.2 Dimensions and Weight
- Crate dimensions and shipping weight of each module
| width | | | depth | helght | weight |
| Monitor cabinet | 39.5in | 47.5 in | 79 in | 441 Ibs |
| Seat platform | 31.5 in | 47.5 in | 63 in | 198 Ibs |
- Dimensions and net weight of each module unpacked
| width | depth | height | | | weight |
| Monitor cabinet | 34.25 in | 31in | 70.5 in | 408 Ibs |
| Seat platiorm | 30 in | 37.25 in | 49.75 in | 165 Ibs |
SMASHING DRIVE ~ OPERATOR’S MANUAL
- Total dimensions of the machine, installed on site
width depth height 34.25 in 66.75 in [ 70.5 in
2.3 Power Supply
Power Supply Unit: —_ Pacific Electronics USR/CNRGWP-2004T Operating Power: 110V AC, 60 Hz Output: +5VDC 20A +12VDC 8A
2.4 Monitor
Wells Gardner Model #D9200 P/N WGM2792-U0TS29K
2.5 CPU Board
PCB Gaelco SMASHING DRIVE
2.6 Controls
Steering Wheel Start Button & Horn (placed on the Steering Wheel) Gas pedal Brake pedal
2.7 Attachments
One Operator's Manual Two coin box keys Two rear door keys One line cord (3m tong) One link cable
SMASHING
DRIVE
NYC-IIxM < wn g S e ot = =
SMASHING DRIVE - OPERATOR'S MANUAL
- PREVENTIVE MEASURES
3.1 Siting of the machine
This machine has been for indoor use only, within residential or commercial spaces. Absolutely do not set up the machine outdoors or under the following conditions:
© Direct exposure to sunlight, high humidity, water contact, dust, high heat or extreme cold.
e Ina place exposed to vibration. The machine must be installed on a level surface with levellers property adjusted.
Inlocations near ventilating holes. Doing so could cause internal temperature to rise excessively, resulting in equipment failure.
« Near hazardous substances
Do not place this machine where it might be an obstacle in case of emergency (i.e. close to fire extinguishers or emergency exits)
3.2 Improper uses
Please heed the following indications in order to ensure your safety when using this game machine. Be sure to read and get a good understanding of each item:
© This machine must be used only in residential or commercial areas
- Do not use the machine as support for other objects
e Do not use the machine in the vicinity of containers holding liquids or liquid dispensing equipment. In general, precautions should be taken against spilling liquids of any kind whatsoever over the machine
e Ventilation slots must be not obstructed, and the machine must be positioned so as to leave a distance of at least 10cm (4”) from possible obstructions
e Do not run the power cord across passages where pedestrian’s feet could getcaught on the cord.
SMASHING DRIVE — OPERATOR'S MANUAL
- HANDLING
person. Failing to do so could result in injury or product damage. The machine contains parts that are sensitive to vibration and impact. This product should be set up, moved or transported by a trained man You must be very careful when moving or transporting the machine.
4.1 Equipment needed for transporting the packed machine
The packed machine must be transported in a closed means of transport with sufficient carrying capacity for the gross weight of the machine, which is 441 Ibs for the monitor cabinet and 198 for the platform. The machine, must remain packedon its pallet must be suitably secured to the means of transport. It is very important that the lifting fo! are pushed right to the back of the wooden pallet, to give optimum stability to the .
™
a
width dey height crated wei MONITOR Wm = 39.5 in Dm = 47.5 in Hm = 79 in IS PLATFORM Wp= 31.5in = 47.5in Hp = 63 in 198 Ibs
It is not allowed to lift the packed machine with ropes or belts, as the package is not equipped with suitable lifting points for this tape of transport. t
SMASHING DRIVE - OPERATOR’S MANUAL
4.2 Storage
Store the packed machine in sheltered and dry areas. Temperatures allowed: maximum +113 F/ minimum +23° F
4.3 Reception
The SMASHING DRIVE game cartons should be carefully inspected upon raceipt to insure that the game is completed and was delivered in good conditions. Shipping damage may void warranty. In case of shipping damage, contact your Distributor and the Transportation Carrier immediately.
4.4 Unpacking
It is convenient to unpack the machine where it is going to be used or in a place as near as possible to this. Two people are needed to lift the cardboard packing over the top of each unit. Once the packing is removed, the machine looks as shown in the illustration.
SMASHING DRIVE - OPERATOR’S MANUAL
4.5 Movement of the unpacked machine
The machine can easily moved by using their wheels. When moving the game machine, always return the levellers to the extreme up position. When moving the machine on sloping or uneven surfaces or across steps, proceed with extreme caution to avoid the risk of being crushed! The cabin is not equipped with lifting rings. It is therefore absolutely prohibited to lift it with ropes or belts!
- INSTALLATION AND SETTING UP
When setting up, be sure to fasten the machine securely. {f the unit is not fastened securely, it could be damaged by rocking or could result in injury. The operations described below must be done with the machine unplugged from the electrical power supply system
§.1 Inspection
Inspect the game cabinet by doing the following:
« Examine the cabinet exterior for dents, chips, or broken parts
e The monitor cabinet has a rear door that gives access to the PCB, the monitor and the power supply unit. The door has a safety switch. Only a trained person should do this operation. The keys can be found in a bag fastened to the steering wheel. After turning the key to the left pull the panel towards you until it leans enough to grip it with both hands by the sides and pull it upwards. In this way it will be freed from the guide that holds it at the bottom.
© Check that all the piug-in connectors are firmly plugged in. Do not force connector together. The connectors are keyed so they fit only in the proper orientation. A reverse edge connector can damage the PCB and will void your warranty.
« Inspect the major assemblies, such as the video display monitor, PCB, steering wheel and seat. Make sure that they are mounted securely and that all ground wires are firmly connected.
« Inspect the line cord to insure that there is not cuts or breaks in it.
W
SMASHING DRIVE - OPERATOR’S MANUAL
5.2 Setting up
The operations described below should carried out by trained persons. AC power must always be tumed OFF, and the game unplugged, before replacing any parts or connecting/disconnecting connectors.
BASIC PRECAUTIONS
- Check that the area chosen to install the machine is distant from heat sources, and that the machine, when fully installed, will not obstruct emergency exits.
¢ Begin the set up with the monitor cabinet. Adjust the leg levellers by hand so they make contact with the floor. Continue to adjust levellers until the cabinet is levelled and stable on the floor. After adjustments are complete, secure the height of the leg levellers.
© Since the machine is a heavy object, its leg levellers should be retracted when moving the machine over the floor.
- Once the game machine is set, plug the power cord into a grounded receptacle that provides 110 VAC at60Hz.
e The Cabinet Monitor must be grounded with a securely connected ground plug. This will ensure safe operation as well as compliance with the applicable FCC and UL regulations.
« When unplugging the game from an electrical outlet, always grasp the plug, not the wire. Do not plug or unpiug the power cord with wet hands
« [f the line cord becomes damaged -core exposed, broken, etc- please contact your nearest dealer for replacement. Using a damaged line cord could result in fire or electrical shock
« The game machine includes areas of high voltages. Care must be taken at all times to avoid electrical shock whenever inspecting or adjusting the game, particularly around the monitor
SMASHING
DRIVE
NYC-IILxXM TM & © GAFLCO S.A.
SMASHING DRIVE - OPERATOR'S MANUAL
5.3 Assembly of the platform to the monitor cabinet
The assembly of the two units together must be done where the machine is to be used. First of all make sure the monitor cabinet is levelied, then follow the instructions step by Step:
- Put the two modules close to each other, leaving room to reach the interconnect cables.
« Level the seat platform to the same height as the monitor cabinet.
- Connect the cable of the vibrator and affix the L-brackets joining the two modules using the enclosed hardware.
qty 2 Cabinet Mounting Bracket p/n: G535-8911-00
qty 4 bolt 5/16 -18x 1-1/2 pin: 237-6083-00
qty 4 washer 5/16 ID x 3/4 OD p/n: 242-5030-00
¢ Carefully adjust all the levellers so that the whole machine rests firm and level on the floor. Remember that the platform incorporates a vibrator
SMASHING DRIVE — OPERATOR'S MANUAL
5.4 Switching on the machine
The mains switch is located in the compact filter assembly, which also contains the fuse and the socket for the mains cable. It is found in the back of the machine, at the top right when viewed from the front. To start the machine, push the switch to position “I”.
The machine can be switched OFF (position “0”) in any moment that is considered to be necessary. If a game is in progress on the machine, the credit will be lost.
To-avoid possible damage to the electronic ic Fomponerns N speieialsseari® ator turing the:machine onagain.
SMASHING DRIVE - OPERATOR’S MANUAL
- PROGRAMMING THE MACHINE AND TEST MODE
An automatic check of the memories is made when the machine is switched on. This coincides with the presentation of the Screen Test. After a few seconds, if no error occurs, it passes automatically to show the game. The interface is also adjusted dynamically each time that a machine is switched on. Any other adjustment should be made in TEST MODE.
The access to the TEST MODE as for the other controls -monitor, sound, etc.- is made from the CONTROL PANEL, which is situated behind the coin box door. This panel consists of a button to access TEST MODE, a coin counter, a SERVICE button, and a commuter to adjust the VOLUME of the loud speakers.
wnIE = 7 *
SEE INSERT BEHIND PAGE 32 FOR THE ACTUAL SERVICE PANEL LAYOUT
Pressing the TEST button enters TEST MODE, where the game variables, such as level of difficulty, linkage of machines, etc., can be adjusted. A check of the Steering Wheel and other controls can also be made. The SERVICE button aliows the technician to introduce game credits without moving the coin counter.
The TEST MODE is a rotary system of 7 screens
Settings Input Test Output Test Book Keeping 1/3 Book Keeping 2/3 Book Keeping 3/3 Exit / Continue
By moving the cursor with the accelerator and brake pedals you can choose the option required. Pushing the HORN button placed on the centre of the steering wheel makes ihe selection.
To make sure that the changes that have been made are kept permanently, you must not switch off the machine without first leaving TEST MODE with the option exit and save settings of the Exit / Continue screen.
SMASHING DRIVE - OPERATOR’S MANUAL
6.1 SCREEN TEST
This screen is the ADJUSTMENT CARD, which should be used to suitably adjust the monitor. It shows you, also, the following information:
EEE ae VERSION VERSION AD : CHECKSUM 2
Horm—to__Coneinue
To jump from this screen onto the next is necessary to push the TEST button or the HORN button.
6.2 SETTINGS
On this screen you can change the following game parameters:
SETTINGS
2 coin(s) 1 credit(s) Start 1 credit(s) Difficulty: EASY Advertise sound: NO Link: NO
Continue
Horn to Modify Accel. or Brake to Select
SMASHING DRIVE - OPERATOR'S MANUAL
coin(s) / credit(s)
On this option you can adjust the number of credits (games) that the machine gives for a defined number of coins. If the number of coins is set at zero, the machine remains adjusted for FREE PLAY.
Start It is also possible to program the number of coins required to start the game.
Difficulty The game has four levels of difficulty: EASY, NORMAL, HARD and HARDEST There is also a type of variable difficulty, the DYNAMIC, which changes depending on the player's skills and how much busy is the machine.
Advertise sound By means of this option you can program the machine for sound production (or not) when it is in exhibition mode.
Link This line shows the status of the machine. If it is linked with another machine you have to assign a different status to each one of them. One should be MASTER and the other SLAVE as indicated on the options (MASTER-RIGHT CABINET / SLAVE-LEF CABINET). If there is any interconnection problem, two types of message can appear when playing:
CONFIGURATION ERROR IN ONE CABINET -» The machines are successfully connected but there is some error of configuration. For example, perhaps both are in MASTER mode, have different level of difficulty or their program versions do not coincide.
NO LINK -> There is no communication between the machines. This could be due to a cable fault or because both are in SLAVE mode.
If there is no link between two machines the option NO should be selected.
To go onto the next screen push the TEST button or select the Continue option and then push the HORN button.
SMASHING
DRIVE
NYC-IIxM TM & © GAELCO S.A.
SMASHING DRIVE - OPERATOR’S MANUAL
6.3 INPUT TEST
The INPUT TEST screen enables you to check the correct functioning of the following controls:
INPUT TEST
Steering wheei: 080 (-038)
Accelerator Brake Horn Coin Service 2 Test z Volume Up Voiume Down: —
Hoid HORN to Continue
« The Horn button is placed on the centre of the Steering Wheel « Service and Test buttons, as well as the volume control, are placed on the CONTROL PANEL behind de coin door.
To go onto the next screen press the HORN button for a while,
6.4 OUTPUT TEST
This screen allows you to check all output signals from the CPU: steering wheel motor, vibrator motor, horn lamp and the three sound channels, The parameter is selected by means of the pedals and the status is defined pressing the HORN button. To check a motor the corresponding line should be ON. The power applied to the motor you choose is controlled by turning the steering wheel. This also applies to the vibrator motor, which is not powered until you turn the wheel. To leave this screen push the TEST button or operate the Continue option.
OUTPUT TEST
Wheel motor : OFF (+0.00) Seat motor : OFF (+0.00) Lamp : OFF Sound 1 : OFF Sound 2 : OFF Sound 3 : OFF Continue
Horn to Modify/Confirm Accel. or Brake to Select
SMASHING DRIVE - OPERATOR'S MANUAL
6.5 BOOK KEEPING
The data for the activity of the machine are collected on three screens. To go from one screen to another you push the HORN button.
BOOK KEEPING (1/3)
Credits 7 163 Service Cred. : 0 One Pi. Games : 87 Two Pi. Games : oO Total Time : 41h 54m 43s Play Time : 3h 12m 39s Shortest Game: 0m 15s 43c Average Game: 2m 12s 85c Longest Game: 14m 00s 75c
Horn to Continue
Reading from top to bottom, the following information is given on the first screen:
Credits owed for the coins entered Credits entered with the SERVICE button Number of games of an individual player Number of games of two simultaneous players (Link Mode) Total time the machine is connected in hours, minutes and seconds Total time the machine is busy in hours, minutes and seconds Time of the shortest credit in minutes and seconds Time of the average credit in minutes and seconds Time of the longest credit in minutes and seconds. eereeeeeves
The second screen is a time histogram where a detailed distribution of the number of credits is displayed according to their duration, from 0 to 2 minutes until 8 minutes. It also includes the number of times each stage has been surpassed by winning the corresponding stretches.
BOOK KEEPING (2/3) 0,00-2,00: 2,00-2,30: XX 2,30-3,00: 3,00-3,30; 3,30-4,00: 4,00-4,30: 4,30-5,00: 5,00-5,30: 5,30-6,00: 6,00-7,00: 7,00-8,00: 8,00-n,nn: Win. Pi: XX (0/0/0/0) Win. P2: XX (0/0/0/0) Win. P3: XX (0/0/0/0) Winners DUSK&WIRED:
Horn to Continue
W
SMASHING DRIVE - OPERATOR'S MANUAL
Win. P1 — winners of the EARLY BIRD stage Win. P2 — winners of the RUSH HOUR stage Win. P3 — winners of the NIGHT OWL stage
Each stage consists of three stretches, plus a bonus stretch when the player makes enough points. The bonus stretch has three “time extended” lines.
The DUSK&WIRED stage is not available until the player surpasses the other three stages.
The third screen shows additional information about the game incidences on each stage:
BOOK KEEPING (3/3)
Lvi Cont GmOv Win MinT AvgT
| Lv: | Game level | 1.14 | 23 | 8 | 84.55 87.58 | ||
| Cont: | Continue (Number of players) | 1.2 | 0 | 5 | 1 | 79.55 80.90 | |
| GmOv:GameOver(“ | “ | *) | 13 | 0 | 6 | 2 | 79.53 105.81 |
| Win: | Winners on each level | 21 | 6 | 8 | 3 | 88.61 91.06 | |
| MinT: | Minimum time | 22 | 0 | 2 | O | 86.46 | 0.00 |
| AvgT: Average time | 2 | #0 | O | 1 | 84.53 87.51 | ||
| 31°61 | 5 | 1 | 86.55 91.06 | ||||
| 3.2.0 | 3 | 0 | 87.55 | 0.00 | |||
| To go onto the next screen press the | 33 | 2 | 1 | 0 | 85.16 | 0.00 | |
| 0 | 0 | 0 | |||||
| HORN button. | 41 | 134.43 0.00 |
Horn to Continue
6.6 EXIT/ CONTINUE SCREEN
On this screen the following options are displayed:
Reset Book Keeping Reset Record Tables Exit and Save Settings Exit Without save Settings CONTINUE IN TEST MODE
Horn to Confirm Accel. or Brake to Select
SMASHING DRIVE - OPERATOR’S MANUAL
Reading from top to bottom:
« Erase data of the game record tables that accumulate from day to day. « Erase the book keeping data. ¢ Exit from Test Mode retaining memory of the changes that have been made in the previous screens « Exit from Test Mode without keeping the changes © Continue in Test Mode
Selection is made with the brake and accelerator pedals, while the option chosen is switched in with the horn button. Be carefull! Whatever the changes that have been selected in the previous screens will be eliminated unless you exit from this final screen using the option exit and save changes, confirmed with the Horn button as indicated on the bottom of the screen.
- HOW TO PLAY
Starting the game
To start to play it is necessary to put enough coins to cover the price of at least one credit (credit::1). If the programmed number of coins is not reached, the message could be, for example, credit: 0 1/2. In this case, the first figure is the number of credits obtained (none) and, in the fraction, the first figure is the number of coins already introduced (one) whereas the second figure is the number of coins necessary (two) to reach the price of the credit. The cost of a credit is programmed from Test Mode (see section 6.2). When the game has a cost different to one credit, as in the example of the previous paragraph, the player has to introduce coins until the price is equal or greater than the programmed option.
When the necessary coins have been put in, the player has to press the HORN button, placed on the centre of the steering wheel. From this moment the game begins.
The player can choose any one of the 3 main stages by turning the steering wheel. Pressing the HORN button confirms the choice. The game begins as soon as the confirmation is made or after ten seconds,
Game System
SMASHING DRIVE is an arcade game based on the frantic driving of a “super-cab” in New York City. The taxi driver picks up a client and races trough NY trying to avoid traffic jams and obstacles, discovering many surprising shortcuts and getting extra advantages distributed at points along the course, that convert the cab in a fantastic car worthy of Batman or James Bond. Almost everything is permitted but the car looses speed when smashes against an obstacle, so bad drivers would be punished with rather poor scores. The goal of the player is to complete the selected circuit in the least possible time, dodging the obstacles that cut across his path, at the same time keeping a flerce competition with another cab controlled by the CPU. Two players can also race one against each other when the machines are linked.
SMASHING DRIVE - OPERATOR'S MANUAL
There are 3 different stages, as mentioned above, plus a hidden one that is available if the player succeed in winning completely all the previous stages. Each stage, or phase, consists of three stretches of 80 seconds each, approximately.
The player can choose any of the three different stages of the game. To win a game stage the player must reach the end of each stage before the rival taxi. When playing against the machine, the opponent taxi carries the CPU sign. When two machines are linked and the opponent is another player, his taxi carries the PL2 sign. Time goes on as soon as the game starts. In the middle and at the end of each section there is TIME EXTENDED line where the player can get extra time. The player is eliminated if does not complete the full stage before the time limit. This varies according the difficulty of the course. The hidden stage is a special run of just over two minutes long, with two TIME EXTENDED points.
Controls
The player has a steering wheel to drive the vehicle, an accelerator pedal to speed up and a brake pedal to stop with. The steering wheel has a button in the center to sound the horn and for some other uses. When the horn is active cars and pedestrians get out of the way, but excessive and unnecessary use causes a temporary loss of function. The player can make spectacular maneuvers with these controls. For example:
e Rapid turn of the steering wheel with the brake pedal down hard: this causes a skid, giving a faster and tighter turn of the vehicle. « Rapid turn of the steering wheel when the taxi is near and parallel to other vehicle: result is a strong side impact.
Special Advantage icons
Scattered along the course are a series of icons which can be captured if the player crosses them with the taxi. Each icon gives some type of advantage for a short span of time:
TURBO: Gives a fantastic increase of speed BIG-FOOT: Provides the taxi with giant wheels capable of crushing anything. CUTTER: quips the taxi with circular saws for cutting obstacles.
SMASHING DRIVE — OPERATOR'S MANUAL
REPARE: Allows the player to repair any crash damage CRASH: Super bumpers that allow the taxi to crash head-on without damage. SONIC: — The horn can make sonic blasts that destroy nearby vehicles.
GLIDER: The taxi can manoeuvre whilst in the air, thanks to ailerons. TIME: — ‘Time bonus (?): Surprise! (any of the previous helps)
8, HOW TO LINK TWO MACHINES
SAMASHING DRIVE allows you to connect two machines so that two players can compete directly. To do this the following steps should be taken:
. Make sure that the connection cable is correctly plugged into both machines. . Switch on both machines. . Press the TEST bution on the CONTROL PANEL of both machines. . Go to the SETTINGS on both machines (See section 6.2 of this manual) . Define the condition of each machine, Master or Slave as indicated on the SETTINGS screen. . Go to the EXIT / CONTINUE screen, choose EXIT AND SAVE CHANGES option and validate with START button (Horn). abhon-
a
When you want to disconnect the two machines, you should unplug the link cable and proceed in the same way from step 2. On step 5 choose NO for both machines, then exit from de Test Mode with the option EXIT AND SAVE CHANGES of the EXIT / CONTINUE screen.
SMASHING DRIVE - OPERATOR’S MANUAL
- MAINTENANCE
In all maintenance operations these directions should always be observed,
« When replacing parts, be sure to use parts of the correct specifications. e Adjustment is required whenever the game PCB, joystick or potentiometers are changed © Do not attempt to repair the PCB. It contains sensitive chips that could easily be damaged by even the small intemal voltage of a meter. Always retum the PCB to your distributor for any repairs.
9.1 Checking the steering wheel
The contro! of the steering wheel is adjusted automatically as the player tums it from one side to another, so that no further adjustment is necessary. None the less, if you suspect its is not working well, a simple test can be made. Enter INPUT TEST (section 6.3) and go to the Steering wheel line (should be switched ON). When the steering wheel is in its central position, the figure in brackets should be close to zero.
9.2 Fuse replacement
Before starting this operation disconnect the machine from the mains supply using the switch located on the rear of the monitor cabinet (see section 5.4). For greater safety you can unplug the mains cable. The fuse is in the same unit as the switch and the mains cable socket.
SMASHING
DRIVE
NYC-IIxM < “
og &
oy = e
SMASHING DRIVE - OPERATOR'S MANUAL
9.3 Access to the steering wheel mechanism
To get at the steering wheel mechanism, do as follows:
- Remove the steering wheel after unscrewing the five bolts SDR-930 which fasten it to its cylindrical mounting. Unscrew the nut SDR-982 using a 19mm tube spanner Disconnect the cable and remove the steering wheel. Unscrew the four screws SDR-951 and the three SDR-962 which hold the plastic panel in position. Loosen (do not unscrew completely) the screws of the side mouldings which retain the plastic panel Remove the plastic panel so the mechanism can be examined or taken out.
SMASHING DRIVE ~ OPERATOR'S MANUAL
9.4 Access to the vibrator
The first step to access the vibrator is to dismantle the seat assembly by taking out the four bolts SOR-963 which hold it to the platform. To take out the rear bolis is necessary to move the seat forwards. The front bolts are exposed when the seat is moved backwards.
Once the seat assembly is removed, the vibrator can be accessed when the plate SDR-831 is unscrewed. if you need to work on the vibrator, there is a detailed diagram in section 10.8.
: SMASHING
‘DRIVE NYC-IIxM
SMASHING DRIVE - OPERATOR'S MANUAL
9.5 Basic troubleshooting
PROBLEM
Nothing happens when turning on the machine
Monitor screen is black or the picture is distorted
Colour or Image on the screen is not correct
There is no sound or its quality Is poor
The steering wheel is not operating properly
The message COMMUNICATION ERROR appears on the screen POSSIBLE SOLUTION
v Check wiring connector connections v Check fuse of the line filter ~ Check voltage value for +5VDC on PSU
v Check for faults on monitor / Check for disconnected cable ~ Check tor faulty PC Board
~ Enter Screen Test (section 6.1) on Test Mode making the necessary adjustments.
/ Enter Test Mode and check the sound # Check the speakers and their connections / Check voltage value for +12VDC. #¥ Check the volume button on the Control Panel
# Check that the potentiometer belonging to the steering wheel is working correctly. v Check the connections between the potentiometer and the CPU. / The potentiorneter should be supplied between the vottage limits of +5VDC and GND. ~ On the cursor of the potentiometer should be a voltage of approximately 2.5VDC. when the steering wheel is centred
~ Check the link / Follow the indications of section 6.2 (SETTINGS)
SMASHING DRIVE - OPERATOR'S MANUAL
- PARTS LIST
10.1 MONITOR CABINET — Plastics and attachments
CODE G-SDR-110 G-SDR-120 DESCRIPTION SIDE COVER, RIGHT SIDE COVER, LEFT G-SDR-228 SUBWOOFER PROTECTION PLATE G-SDR-501 G-SDR-502 G-SDR-504 STICKER - INSTRUCTIONS STICKER - LEFT STICKER - RIGHT G-SDR-510 G-SDR-515 -SDR-515R| G-SDR-011 | FRONT PLASTIC ATTRACTION PANEL ASSEMBLY "ATTRACTION PANEL MARQUEE
FLUORESCENT ASSEMBLY, attraction panel
G-SDR-950 SCREW RA81 SELFTHREAD, 3,9x9 G-SDR-951 G-SDR-962 SCREW RA&1 SELFTHREAD, 3,9X20 SCREW , 237-5978-00 _1/4- 20x 11/4 PPH G-SDR-964| SCREW , 237-6082-00 1/4 - 20 X 1 3/4 PTH
SMASHING
DRIVE
zNYC-IIxM & © GAHCO S.A.
SMASHING DRIVE - OPERATOR’S MANUAL
MONITOR CABINET - Plastics and attachments
SMASHING DRIVE - OPERATOR'S MANUAL
10.2 MONITOR CABINET ASSEMBLY — Back view
[ CODE [| CCiESCRRIPTION, |G-SDR-105| BACK DOOR BRACKET, Safety switch , N535-8752-00 POWER SUPPLY UNIT, REF._USR/CNRGWP-2004T SMASHING DRIVE CPU BOARD MOTOR CONTROL UNIT 8” SPEAKER (SUBWOOFER) |G-FOP-363| FAN, 110V 120X120 G-SDR-364| AC FILTER & FUSE HOLDER, REF. QUALTEC 880-01 G-FOP-365| FAN GRILL |G-SDR-366| SAFETY SWITCH, back door , 180-5136-00 |G-SDR-367| VENTILATION GRILL 15X15 \G-SDR-370| TRANSFORMER , G-010-5024-00 IN-FOP-370| POWER CABLE IG-SDR-385| 15 PIN TERMINAL BLOCK , N-045-5405-15 G-SDR-386| 10 PIN TERMINAL BLOCK , N-045-5405-10 IG-SDR-387| BASE BM 99601 for fixing terminal block ~SDR-388| BASE BM 99621 for fixing terminal block |G-SDR-389| FIXING RAIL for terminal blocks G-SDR-434| PLASTIC GRAB HANDLE C3605 IG-SDR-435| DOOR LOCK, 355-5035-00 N23078A X CAM X 2K X SF4000 IG-SDR-440| PLASTIC TUBE, subwoofer box IG-SDR-909] WASHER , 242-5030-00 IG-SDR-926| SCREW DIN 7985 M4X5 COPPERPLATED, fan ground IS-SDR-981| NUT , 240-5312-00 IG-SDR-355. |G-SDR-357 |G-SDR-358
SMASHING DRIVE NYC-1IIxXM <
Z
et fa
1 \\ OL¢-dO: y TWANVW S.8OLvaadO - JANG ONIHSVWS
SMASHING DRIVE - OPERATOR’S MANUAL
10.3 MONITOR CABINET — Front view
DESCRIPTION IG-SDR-100| WOODEN CABINET -SDR-210| DOUBLE FRAME MINIDOOR (coin door and cash box door) DR-222| ALUMINIUM COVER, feet rest platform \G-SDR-223/ ALUMINIUM PLATE, feet rest platform BRACKET, monitor 535-8915-00 (left); 535-8915-01 (right) RECEPTACLE for dual frame minidoor |G-SDR-226| BRACKET, steering wheel |G-SDR- 016) TEST & SERVICE PANEL G-535-8923.00 |G-SDR-310| DUAL FOOT PEDAL ASSEMBLY, GAS/BRAKE. |G-SDR- 006] 28° MONITOR, WELLS GARDNER D9200 REF. WGM2792-U0TS29K IS-SDR-431| LEG LEVELER, G-0066-003-00A 1/2-13 4” L |-SDR-433| CASTER, SWIVEL G-0066-007-000 160 - 2 1/2 #25188
- —)
© HE Om Tit See = 7 + foot tT FOp-396 S-STW-00287-AS_ FOp-396 —_ SDA-295
SEE NEXT PAGE INSERT FOR SERVICE PANEL LAYOUT.
SMASHING DRIVE - OPERATOR'S MANUAL
G-SoR=223 <>
G-SDR=431 4 G-spR433 ©
MONITOR CABINET — FRONT VIEW
SMASHING DRIVE - OPERATOR'S MANUAL
THIS PAGE LEFT BLANK FOR CLARIFICATION PURPOSES.
< w J
zg oa © @ = z
33a
SMASHING DRIVE — OPERATOR'S MANUAL
10.4 STEERING WHEEL ASSEMBLY
DESCRIPTION
STEERING WHEEL
POTENTIOMETER 5KQ. STICKER, hom button G-SDR-307| CABLE CLAMP N-4 N-FOP-360_| 5” SPEAKER /4Q/60W — 2 WAY. 5 COUPLING CYLINDER, steering wheel G-SDR-303] STEERING WHEEL MECHANISM G-SDR-304] HORN BUTTON
WASHER AEF M6 WASHER DIN 6923, M5
WASHER DIN 6798A, M12 SCREW DIN 912, M6X16 G-SDR-919 G-SDR-930
G-SDR-982} NUT DIN 985, M12
< ww Q o z &
= G-SDR-918] WASHER DIN 6789A, MB
SMASHING DRIVE - OPERATOR’S MANUAL
STEERING WHEEL ASSEMBLY
SMASHING DRIVE - OPERATOR'S MANUAL
10.5 STEERING WHEEL MECHANISM
CODE DESCRIPTION C-22-03036 WASHER, belt fastener C-22-0103660 SCREW, belt fastener C-22-0501410__| SLEEVE, potentiometer pinion C-22-80025525_| KEY WODRUF, steering wheel shaft C-29-401582 MOTOR 20VDC, 3.9A MODEL 1582 C-29-405680 POTENTIOMETER 5kKQ., with PCB (SDR-305)
C-40-000300 BEARING HOUSING
C-40-022087 PLASTIC PINION, shaft
C-40-023097 PLASTIC PINION, potentiometer
C-40-025048 MOTOR PULLEY, plastic
C-40-085027 BELT 15mm 400/5 C-40-203100 SLEEVE, motor pulley C-40-206002 BEARING 6002 ZZ C-40-0250301 OMEGA, belt fastener
C-43-050300 GUIDE SLEEVE, self-oil
C-GA-TX00010__| ATTACHMENT PLATE
POTENTIOMETER BRACKET, iron C-GA-TX01010 _| SHAFT (SDR-303) C-GA-TX02010_| STOPPER SHAFT PULLEY, iron SLEEVE, steering wheel shaft C-GA-TX05200
: SMASHING
DRIVE NYC-IIxM
SMASHING DRIVE - OPERATOR'S MANUAL
THIS PAGE LEFT BLANK FOR CLARIFICATION PURPOSES.
¢ SMASHING ‘DRIVE zNYC-IIxM
36a
SMASHING DRIVE - OPERATOR'S MANUAL
10.6 SEAT ASSEMBLY
CODE DESCRIPTION IG-SDR-802 |G-SDR-805| PLASTIC COVER, seat slides SEAT IG-SDR-806' -SDR-807, BACK COVER, seat
G-SDR-810 STICKER, back cover HANDLE, seat slides | |G-SDR-811
SEAT SLIDE, RIGHT
G-SDR-612 SEAT SLIDE, LEFT |G-SDR-832| SUPPORTING PLATE, seat |G-SDR-833| PROTECTION PLATE, seat slides G-SDR-913 WASHER, SPLIT LOCK 5/16 244-5004-00 IG- SDR-932! G-SDR-963 SCREW DIN 912, M8X16 SCREW 237-6085
- SDR-974 NUT LOCK ZN M8 ELAST G-0013-010-11
SMASHING
DRIVE
NYC-IIxXM < a
© on)
SMASHING DRIVE - OPERATOR’S MANUAL
G-SDR-932
G-SDR-811 G-SDR-810
G-SDR-812
G-SDR-913
G-SDR-932
G-sDR-963
G-SDR-802
G-SDR-832
, i f G-SpR-913 é he ? : G-spR-971 yo ! ; ' t
SEAT ASSEMBLY -SDR-807
SMASHING DRIVE - OPERATOR’S MANUAL
10.7 PLATFORM ASSEMBLY
CODE DESCRIPTION IG-SOR-140 MAIN STRUCTURE IG-SDR-831 IG-SDR-835 IG-SDR-850 IG-SDR-851 IG-SDR-852 VIBRATOR BASE “U" TUBE. SILENT BLOCK 34X34 /55 SHORE RING K19 COMPAK, rubber SEPARATOR SLEEVE K112 COMPAK, brass '- SDR-861 |G-SDR-863 IG-SDR-913
G-SDR-981 [G-SDR-910 (G-SDR-971_| LOCK NUT ZN M8 ELAST G-0013-010-111 NYLON STOP NUT 240-5316-00 LEG LEVELER , G-0066-003-00A, 1/2-13 4°L CASTER, SWIVEL, G-0066-007-000, 160 - 2-1/2 #25188 WASHER, SPLIT LOCK 5/16 244-5004-00
WASHER 3/8 242-5000-00 G-SDR-933 BOLT BT BO 3/8- 16 X 24 HX_G0007-020-211
SMASHING DRIVE NYC-IIxM <
r=]
9) wy =
SMASHING DRIVE - OPERATOR'S MANUAL
2 G-SOR-913
G-spr-971
G-SOR-831
‘&
G-spR-850
G-SDR-140
G-spr:
PLATFORM ASSEMBLY
SMASHING DRIVE - OPERATOR’S MANUAL
10.8 VIBRATOR ASSEMBLY
G-SDR-929 G-SDR-980 [_copE DESCRIPTION _] G-SDR-820| MOTOR G-SDR-825| BEARING ASSEMBLY S8201-BPFL-12 (-SDR-826| BEARING HOUSING BPFL-12 G-SDR-834| BEARING BRACKET G-SDR-836| MOTOR BRACKET G-SDR-840| ECCENTRIC DISC -SDR-901 | WASHER DIN 125, M4 G-SDR-902| WASHER 1/4 ID X 7/8 OD X 1/8 BLK _242-5016-00 G-SDR-911| GROWER WASHER DIN 127, M4 SCREW DIN 912, M4X14 NUT, NYLON STOP 1/4 - 20 240-5314-00
“ = > Q@ wn g = o
cl = z =z ~< * Es =] 7a at rr
4)
TWANVW S.YOLVaadO — SAIC ONIHSVWIS

This page is a drawing, shown as the original scan.
ADAPTER
COIN @
GROUND WIRING DIAGRAM
LINE FILTER
H @ Coeecooccccs
© can, e.e:02 euR-03 LAMP |
FLUORESCENT
Lp-03 eLA-0>
@
COIN DOOR
TEST & SERVICE 3 MONITOR eLp-oav ELR-oav BOARD Y CPU BOARD Tie ROUND WIRING DTACRAM Tre Poounent Number ° MOTItARA. som aN... Nexembar— A. -ane] 11.2 GROUND WIRING SMASHING DRIVE - OPERATOR'S MANUAL
BOIAwaS B 1834 NIO9 DINOYL93713 NIQO W2INYHOSW AENYd TOYLNOD WVYOVIG ONTIYIM LAENIGVO worisser snl aquvog ndd ONIHIM LINIGVD ELL TWANVW S.AOLVUadO - JAC ONIHSVWS
(I) "ALO vO0-89bS-9E0-N # FIVINS AIH 27 Tce BH J1dv9 WINVd AQIANTS (y'dAl>) 10-GL6S-LECH ‘4L0N SM ASOS _SNILNOOW ‘J LON (2X) IIl-e0€-9000-9 SV-L6200-AALS-S _ 96€-dO4-N C) 900000 FQIANSAS UIA 00-781SG-081-9 b AWN TOA IS3L 00-€e68-GEG-9O
‘JOINGUISIP INOA YyBno.y) eigejiene ase sjonpoid “Ou] BOLaUy OOWN JO} Sedinlas JWeded pue Sued 1d wd 00: - we 00:2 :sunoH pSS6-9r (80r) xv JO Ez6E-E8€ (804) JE BOINNAS J@WO}SND “uy BIE OOWeN }9e]U0D syoddns jeo|uy99} euinbei Jo yonpoud ‘ouj eoWeUWy COWEN Aue Bulpsefes suosenb aney NOA 4} ADIAYNAS yoiym JeAng pue Jaljag usemjeg JoejUOD UETUM e Ul ULC} Jas AjUeWeM Sseidxa Aue 10} }deoxg “sofewep Jejuenbesuod Jo jejuepiou! ‘asn Jo sso| ‘s}youd Jo sso| JO} ajqel| aq Jajjag |Jeys JUSAS OU Ul} paBalie yons yey) uojoessHes syaljeg 0} sasojosip sjonpoid ples jo uoReUIWeXe sJaliag (9 pue ‘jue/d sJ91}8S 0} pledeid peuinjes aie sjonpod yong (q “‘annoayep aye sjonpoid pies yey) JeXng Aq Ayeacosip uodn Bujum ul payyou Apdwoid si sajag (e ‘pepiaoid ‘poled Ajuewem pies Buunp Jeljeg 0} pauinjas ae Yyorym sjonpoid yons Jo} junoooe s,jaAng 129 Jo ‘aoeR|dad ‘sede, 0} ‘uoRdo sy}! Je ‘aq [!eYys Ajiqel| Bajos SJe\jES “payueueM ale joaseyy syed Jo sjonpoid Jayjo sJajjes ay} Jo SUC JUaWdIYs Jo aJep ayy Woy Shep (og) Auiuy Jo poued e Jo eo1AJas pue asn jewOU Jepun diysueWyJOM puke jeLa}eW UI S}JO@Jep WO 2ey aue (sAejdsip spin ym payjddns sewes ul) she|dsip apiA sj! Jey} SJUBLIEM JaIjeg jUeWdiYys Jo ajep 8yj Woy Shep (96) AjeulU jo pouad e Jo) Bd!AJes pue ssn jeWOU Jepun diysueW4Jom pue S|eLe}yew ul s}joajep WO doy ase UOsIEY) SHed pue Spseog jNdWIO payuLd Ss}! Jey} SJUBIEM J9I|9S ALNVYYVM
namco America Inc. 2055 Junction Ave. San Jose, CA 95131 (408) 383-3900 FAX: (408) 383-0128
Technical Assistance (USA)
(408) 383-3973 Fax: (408) 436-9554
Rev A. RELEASED March 2001
The specifications of this machine and the instructions in this Operation Manual are subject to change without notice for enhancement.