Knuckle Bash TM-386 1st Printing Universal Kit
Knuckle Bash (Toaplan / Atari, 1993) · Kit Manual · 42 pages · 42 sections · original scan
This page carries no recoverable text. It is a drawing or a photograph. See the original scan.
paciic ime) pm
The cover of this manual is recycled paper
Kit Installation Instructions
Conversion kit for two-player upright games
TM & © 1993 Toaplan Co., Ltd. All rights reserved, Licensed to Atari Games Corporation.
Copyright © 1993 by Atari Games Corporation. All rights reserved. No part of this publication may be reproduced by any mechanical, photographic or electronic process, or in the form of a phonographic recording, nor may it be stored in a retrieval system, transmitted, or otherwise copied for public or private use, without permission from the publisher. The game play, all graphic designs, this technical manual, its accompanying schematic diagrams, and the display manual are protected by the U.S. Copyright Act of 1976. This Act provides for substantial penalties for violating federal copyright laws. Courts V'|) y 2 can im- \ i), pound in- Mia’ PEM (Mi Que fringing articles while legal action is pending. If infringers are convicted, courts can order destruction of the infringing articles. In addition, the Act provides for payment of statutory damages of up to $50,000 per infringing transaction in certain cases. Infringers may also have to pay costs and attomeys’ fees and face an imprisonment of up to five years as well as fines of up to $250,000 in the case of individuals and up to $500,000 in the case of corporations. Atari Games Corporation will aggressively enforce its copyrights against infringers. We will use all legal means to immediately halt any manufacture, distribution, or operation of a copy of video games made by us, Anyone who purchases such copies risks forfeiting such a game. Published by: Atari Games Corporation 675 Sycamore Drive Milpitas, California 95035 Printed in the U.S.A. 3/93 Produced by the Atari Games Technical Publications Department. Writing and Editing: Andrea Dencker Illustration and Design: Mary Ohanessian Sumner Knuckle Bash Universal Kit
You may void the game warranty (printed on the inside back cover of this manual) if you do any of the following:
- Substitute non-Atari parts in the game. © Modify or alter any circuits in the game by using kits or parts not supplied by Atari Games Corporation.
Knuckle Bash Universal Kit
SAFETY
SUMMARY
The following safety precautions apply to all game operators and service personnel. Specific warnings and cautions will be found in this manual whenever they apply.
ABOUT NOTES, CAUTIONS, AND
WARNINGS In Atari publications, notes, cautions and warnings have the following meaning:
iii
CONTENTS
1 Installation How to Use This Manual .... Cabinet Equipment Requirements Tools Required. Inspecting the Kit Preparing the Cabinet for the Kit Installation Assembling the Control Panel. Connecting the JAMMA Harness. Installing the Knuckle Bash Game PC Installing the Bezel, Decals, Labels, and Attraction Assembly Adjusting the Volume Setting the Coin and Game Options.. Maximizing Earnings . Game Play 2 Self-Test and Troubleshooting Introduction .. 21 Entering and Exiting the Self-Test .. Select Test Screen Input Check (Switch Test) . DIPSW (DIP Switch) Displa Sound Check Screen. Troubleshooting... Removing and Replacing the Joystick Controls
3 Parts Illustrations See the List of Illustrations that follows.
4 Schematic Diagrams See the List of Illustrations that follows. Knuckle Bash Universal Kit
ILLUSTRATIONS
Figure 1-1 _ Installed Kit Parts... Figure 1-2 Locations of Control Panel Holes to be Drilled..
Figure 2-1 Select Test Screen Figure 2-2. Input Check Screen Figure 2-3. DIP Switch Display. Figure 2-4 Sound Check Screen.
Figure 3-1 Parts for Knuckle Bash Universal Kit Figure 3-2 Joystick Assembly Figure 3-3 Knuckle Bash Game PCB Assembly. Figure 3-4 JAMMA Filter PCB Assembly
Figures 4-1 through 4-8: Knuckle Bash Game PCB Schematic Diagram, as follows: Figure 4-1 Circuit Overview Diagram. Figure 4-2. Graphics CPU... Figure 4-3. Graphics Control Unit... Figure 44 — Sound and I/O Processor. Figure 4-5 Vertical Line-Counter and Audio Amplifier .... Figure 4-6 | FM and ADPCM Sound Generation Figure 4-7 Color Palette Look-Up and Video Out .. 4-8 Figure 48 — JAMMA and I/O Interface .... o Figure 49 JAMMA Filter PCB Schematic Diagram
Table 1-1 Equipment Requirements... Table 1-2. Contents of Knuckle Bash Ki Table 1-3. JAMMA Pin and Wire Connections...... 1-4
Table 2-1 DIP Switch 1 Settings. Table 2-2 DIP Switch 2 Settings. Table 2-3 DIP Switch 3 Settings. Table 2-4 — Troubleshooting Table........... Table 2-5 RAM and ROM Error Messages
CHAPTER 1
Installation
HE KNUCKLE BASH” conversion kit shooting table. The self-test is important in
is a two-player game for a standard the Knuckle Bash game. You can trouble-
shoot the PC boards, main circuits, and conupright cabinet. “ This manual provides information for installing, trols using the screens in the self-test. You
testing, and troubleshooting the should regularly test the boards and controls
Knuckle Bash" conversion kit. @ with the self-test to keep your game in peak
Chapter 1 describes how to install condition and at top earnings. # Chapter 3
the Knuckle Bash kit in your cabi- contains the kit parts illustra-
net. This chapter also describes tions. Chapter 4 contains
game play. Chapter 2 contains the schematics for the Knuck-
self-test procedures and a trouble- le Bash game PCB.
Installation
Cabinet Equipment Requirements
Table 1-1 lists the equipment required in the cabinet into which you are installing the Knuckle Bash kit.
Tools Required
¢ Drill with a 1/2-inch and 5/16-inch drill bits ¢ Phillips screwdriver ° Flat-blade screwdriver
- Socket wrench set and ratchet
© 5/32" hex wrench
Eq me! Spec
Color RGB monitor Separate positive horizontal and vertical sync or negative composite sync Horizontal mounting Horizontal frequency: 15.750 KHz Vertical frequency: 60 Hz Video input: 1V to 3V peak-to- Video Display
peak positive polarity
Control Panei Metal only Speaker 80, 10W Coin Counter +5 VDC or +12 VDC
Power Cord Three-conductor with ground +5 VDC + 0.25V @ 5.0 amps minimum
+12 VDC @ 1.0 amp
-5 VDC @ 1.0 amp (optional) Power Supply
Table 1-1 Equipment Requirements
1-2 Knuckle Bash Universal Kit
- Wire cutters and strippers
- Straight edge « Squeegee
- X-ACTO™ knife
¢ Insulated wire connectors (if you are installing a new JAMMA harness)
- Carbon paper
° Saber saw
° File
- Bandsaw
- Tape or glue
Part No. Description
72-6608S #6 x 1/2"-Long, Type AB, Pan-Head, Cross-Recessed Screws (4) 75-5112B #10-24 x 3/4"-Long Black Carriage Bolts (12) 038158-01 Product |.D. Label 039450-01 FCC Compliance Label
042452-01 FBI Warning Label 051656-01 Control Panel Cover 051500-01 Control Panel Decal 051498-01 Side Panel Decals (2)
081499-01 Attraction-Panel Film 051501-01 Monitor Bezel 051678-01 Set of Pushbutton Identification Labels for Contro! Panel 051679-01 Game Instructions Label 141026-003 .4'-Inside-Diameter Ferrite Split Beads (4) 160044-001 Snap-Action Switches (6) 171099-001 —_ 8-Position NO/NC Gold-Contact Black Joystick Control (2) 175014-1040 #10 Flat Washers (12)
177026-0040 #10-24 Zinc Nut/Washer Assemblies (12) 178237-001 Red Button Assemblies (6) 178373-0108 — .5” Straight PCB Standoffs, w/Adhesive (2) A047292-01 JAMMA Filter Board Assy.
155034-001 Knuckle Bash Kit Game PC Board Assy. (includes .75” screw-down standoffs) TM-386 Knuckle Bash Kit Installation Instructions (with control pane! templates) *Packaging materials are not listed. All parts are a quantity of 1, except as noted in parentheses.
Table 1-2 Contents of Knuckle Bash Kit
Knuckle Bash Universal Kit Installation
tems Not Shown
(Att to the back | of the game) 038158-01 Product I. Label 039450-01 FCC Compliance Label (042452-01 FBI Warning Label
051499-01 Attraction Film
051501-01 Bezel
051679-01 Game Instruction Label 1141026-003 40" .D. Spit Ferrite Beads ‘TM-386, Knuckle Bash Universal kit installation instructions
75-5112B #10-24 x 3/4" Carriage Bolt (12 places) 175014-1040 05 1468-011 #10 Fiat Washer Side'Fanal Dacal (12 places) places) 17026-0040 110.24 Zine Nuy ‘A047292-01 jasher Assy. JAMMA Filter (12 places) Board Assembly 155034-001 171099-001 m Knuckle Bash wots Jystek Bead Assembly (2 places) .50" Straight PCB
Standoff with Adhesive (2 places) 72-6608S #6 x 1/2" X-Rec, Pan-Hd, Type ‘AB Screw (4 places)
051678-01 Pushbutton LD. Label
160044-001 051656-01 | | Snap-Action Switch | | 951500-01 cont ne aeaees) Control Panel Decat CAUTION Red Button Assy. Legally distributed Knuckle Bash (8 places) game PCBs have a small holographic “AAMA"” label on them. If your game PCB does not have such a label, contact your Atari Games distributor before installing this kit.
Figure 1-1 Installed Kit Parts
Knuckle Bash Universal Kit Installation
Solder Side Component Side
Color Signal Pi Pi Signal
| Brown? | POWER GND | A | 1 | POWER GND | |
| Brown? | POWER GND | B | 2 | POWER GND | |
| Red | +5V DC | c | 3 | +5V DC | |
| Red* | +5V DC | D | 4 | +5V DC | |
| Orange | Not Used | E | 5 | -5V DC is not used | Orange |
| Yellow* | +12V DC | F | 6 | +12V DC | Yellows |
| — | Key | H | 7 | Key | — |
| Violet/White® | COIN CTR 2 | J | 8 | COIN CTR 1 | Violet/White® |
| _ | Not Used | K | 9 | Not Used | _ |
| White | SPKR - | L | 10 | SPKR + | Brown |
| — | Not Used | M | 11 | Not Used | _— |
| Green | VIDEO GREEN | N | 12 | VIDEO RED | Red |
| Brown | VIDEO SYNC | P | 13 | VIDEO BLUE | Blue |
| _ | Not Used | R | 14 | VIDEO GND | Black |
| _ | Not Used | s | 15 | SELF-TEST | White” |
| Orange | COIN SW2 | T | 16 | COIN SW1 | Yellow |
| - | PLYR2 START | u | 17 | PLYR1 START | White/Black |
| Yellow/Brown | PLYR 2 UP. | v | 18 | PLYR 1 UP | White/Brown |
| Yellow/Red | PLYR 2 DOWN | w | 19 | PLYR 1 DOWN | White/Red |
| Yellow/Orange | PLYR 2 LEFT | x | 20 | PLYR 1 LEFT | White/Orange |
| Yellow/White | PLYR 2 RIGHT | Y | 21 | PLYR 1 RIGHT | Yellow |
| Yellow/Green | PLYR 2 BUTTON A | z | 22 | PLYR 1 BUTTON A | White/Green |
| Yellow/Blue | PLYR 2 BUTTON B | a | 23 | PLYR 1 BUTTON B | White/Blue |
| Yellow/Violet | Not Used | b | 24 | Not Used | White/Violet |
| _ | Not Used | c | 25 | Not Used | - |
| _— | Not Used | d | 26 | Not Used | — |
| Black/White | SWITCH GND | e | 27 | SWITCH GND | Black/White |
| Black/White | SWITCH GND | f | 28 | SWITCH GND | Black/White |
Footnotes
{The colors listed are for reference only. They are the colors used on the JAMMA harness available from Atari. 2Connect to the 5V GND (RTN) terminal on the power supply. However, if you have 12V GND, connect one of the wires at pin 1, 2, A, or B to the 12V GND terminal. 3Connect to the +5V terminal on the power supply. However, if your power supply has a + Sense terminal, connect to the + Sense. 4Connect to the +12V terminal of the power supply. If your coin counter(s) require 12V, also connect to the + side of the coin counter(s). Sit you want to install a second coin counter, connect this wire to one side of the right 12V coin counter. Note: Do not use 24V counters. Connect the + side to +5V or +12V on the power supply, as appropriate. connect this wire to one side of the left 12V coin counter. Note: Do not use 24V counters. Connect the + side to +5V or +12V on the power supply, as appropriate. 7Use this wire if you want an external self-test switch. However, the kit already has a self-test switch on the game PCB. (If you connect an external self-test switch, turn off the switch on the PCB. Connect the wire to the N.O, terminal on the external self-test switch. Connect the common terminal of the switch to a GND wire.)
Table 1-3 JAMMA Pin and Wire Connections
1-4
Knuckle Bash Universal Kit
Inspecting the Kit
Check to see that you have all the parts listed in the kit parts list in Table 1-2. If any part is missing or damaged, contact your distributor with the Knuckle Bash kit serial number, part number, and description of the missing or damaged parts, and date received.
Preparing the Cabinet for
the Kit Installation
Figure 1-1 shows almost all kit parts installed in a typical cabinet. Use this illustration as a guide while you install the parts.
- Turn off power to the game, and unplug the power cord.
- Remove the following from the cabinet: ¢ Existing PCBs
- Game harness, if it is not Japan Amusement Machinery Manufacturers Association (JAMMA)compatible
- Control panel decals, labels, and controls © Side decals, graphics, and adhesive. If the cabinet sides are damaged, repair them before putting on the new decals.
- Video display (monitor) shield, display bezel, attraction shield, and marquee.
- Wipe down and vacuum the cabinet. Paint the cabinet, if required.
Assembling the Control Panel
Parts Needed for this Kit
To assemble the control panel, you need to decide on where to cut the control panel holes. Refer to Figure 1-2. Create a template sheet from that illustration. You will also need the following parts from the kit;
- Clear cover for the control panel
- Control panel decal ¢ Six red button assemblies
- Six snap-action switches Installation
¢ Six control-panel labels (Player 1 Start, Player 2 Start, two A and two B labels).
- Two joystick controls © Eight #10-24 x ¥"-long black carriage bolls, flat washers, and nut/washer assemblies for the two joysticks © Four #10-24 x %"-long black carriage bolts, flat washers, and nut/washer assemblies for the corners of the control panel cover
Installing the Parts 1, Using carbon paper, transfer the joystick mounting pattern from the template to the control panel. Save the template.
- Drill four 4%" holes in the metal control panel for each joystick’s mounting bolts,
- Using a saber saw, carefully cut out the large holes for the joysticks. Deburr the sharp edges with a file. 4, Lay the plexiglass cover over the top of the control panel and mark the outside shape of the panel on the plastic. Also mark the button holes as close as possible to the locations shown on the template. Lastly, mark the positions of the four holes that will be used for securing the cover to the control panel. These four holes can be placed anywhere near the corners — wherever space permits.
- Using a bandsaw, cut the control panel cover to its correct outside shape.
- Tape or glue the template to the plexiglass cover. To start the saber saw cut, drill a 1/2" hole inside the joystick holes and the button holes.
- Saw out the two large joystick holes and the button holes.
- Drill the four 5/16" holes that will be used to mount the cover to the control panel and the 5/16" holes to mount the joysticks.
- To prevent injury, carefully deburr all the edges of the plexiglass cover. S . Install the control panel decal on the control panel. Use a sharp X-ACTO knife to uim the outside edge and to cut out the holes for the controls.
1-5
Installation
- Punch out the rectangular decals from the sheet and mount them beside each of the top two button holes: Player 1 Start on the left, and Player 2 Start on the right.
- Punch out the small square decals from the sheet and mount them above the button holes: from left to right they should be A, B, A, B.
- Install the cover on the control panel with the four 3/4'-long carriage bolts, washers, and locknuts.
- Install the joysticks using the 3/4"-long carriage bolts and #10-24 nut/washer assemblies.
15, Install the button assemblies as shown in Figure 1-1. For maintenance and servicing information on the joystick controls, refer to Chapter 3 of this manual.
Connecting the JAMMA
Harness
- If your game cabinet does not already have a JAM- MA harness, install a JAMMA harness in the cabinet. To purchase a JAMMA harness, contact the Atari Games Customer Service office closest to you.
1.187" Dia. (4 places)“
- Install the split beads on the harness as close to the PCB edge connector as possible. Hold the beads on the harness with the tie wraps included in the kit.
- Using Table 1-3 for wiring information, connect the JAMMA harness to existing component harnesses. Use crimp splices or butt soldering.
Connecting Power Wires 1, Connect the wires on the JAMMA harness to the wires for the power supply, as shown in Table 1-3.
- 8.43"
7.75"
Suggested distance trom the front of the control panel. Check that the Ultimate controls have sufficient clearance before cutting holes. 208 Sq. Hole (@ places) 1.75" Dia. Hole | (2 places)
Figure 1-2 Locations of Control Panel Holes to be Drilled
Knuckle Bash Universal Kit
The Knuckle Bash kit requires +5V and +12V. The —5V is not needed and should not be used. Tie off any other voltage wires on the power supply besides +5V, -5V, and +12V. There is more than one wire for each voltage in the JAMMA harness. Use more than one wire for each voltage (connecting them as described in Table 1-3) so that the power wiring does not overload and burn.
Connecting Video Display Wires
Connect the wires designated for the red, green and blue video guns along with the sync and ground wires, according to Table 1-3.
Connecting Coin Door Wires
- Connect the wires on the JAMMA harness to the coin switches and meter according to Table 1-3.
- Connect one terminal of the door lamps to one of the BK/W wires. Connect the other terminal of the door lamps to the R wire supplying +5V.
Some games have separate power supply outputs for the coin door lamps. If you choose to use these outputs, make sure you connect both terminals of each lamp to the terminals on the power supply.
Connecting the Control Wires Connect the joystick harness and the button harnesses to the JAMMA harness using crimp splices or butt soldering, according to the information in Tables 1-3 and 14.
Grounding the Cabinet Find the ground lead (green) of the 115V input power line. Connect this lead in daisy-chain fashion to a bare metal part of the coin door, the control panel, the video display, and the power supply. This AC ground must be of #18 AWG wire or larger. Installation
Checking the JAMMA Connections
Before plugging in the game PCB, turn on the power to the game, and check +5 Volts on pins 3, 4, C, and D of the JAMMA connector; +12 Volts on pins F and 6; and —5 Volts on pins E and 5. Check that the video display and the attraction lamp have power. Now turn off the power to the game.
Installing the Knuckle Bash
Game PCB
- After you have checked the power on the JAMMA connector (above), install the Knuckle Bash game board set in the cabinet. Use the four #6 x 1/2" long screws in the kit to mount the four nylon standoffs. These standoffs support the Knuckle Bash game board.
2, Plug the JAMMA Filter PCB into the game board. Install the nylon standoffs to support the Filter PCB.
- Connect the JAMMA harness connector to the Filter PCB.
4, Secure the JAMMA harness away from the PCB with cable ties.
- Turn on the power to the game. Check that the game PCB functions. If a video picture is not present, see Chapter 3.
Installing the Bezel, Decals, Labels, and Attraction Assembly
The bezel, decals, labels, and attraction assembly are shown assembled in a cabinet in Figure 1-1.
Installing the Display Bezel
Find the cardboard display bezel in the kit. This bezel can accommodate both 19-inch and 25-inch video displays. Follow the instructions on the back of the bezel, and cut the hole and outside edges as required. If the bezel is missing from your kit, you can use a plain black bezel in the cabinet. Then find the game instruc-
Installation
tions label in the kit, and adhere that label to the bottom center of the bezel.
Installing the Product ID and FCC Label Place the product ID label (part no. 038158-01) and FCC compliance label (part no. 039450-01) on the back of the cabinet.
Installing the Side Panel Decals
Find the side panel decals in the kit. Wet the left and right side panels of the cabinet with slightly soapy water. Then position the decals as shown in Figure 1-1. Remove any wrinkles in the artwork using a squeegee. Allow the sides to dry.
Installing the Attraction Assembly
Find the Knuckle Bash attraction film in the kit (the attraction shield should be reused from your cabinet). Using the existing shield as a template, cut the film to size, if necessary, Install them on the cabinet as shown in Figure 1-1.
Adjusting the Volume
This game has a volume control potentiometer on the game printedcircuit board. To adjust the volume, turn the white knob located near the PCB's edge connector.
Setting the Coin and Game Options
Set the coin and game options in the self-test. See Chapter 2 for information about the option settings.
Maximizing Earnings
For maximum earnings, regularly maintain your Knuckle Bash game following the instructions in Table 2-4, in Chapter 2. When you set up the game and when you collect money, perform the Input Check and Sound Check in. the self-test.
Game Play
This section describes the theme of the Knuckle Bash game and the game play features.
1-8 Knuckle Bash Universal Kit
Introduction
Join Clash, Dice and Devo as they make their stand against wrestling’s underworld! This is the tale of how these young wrestlers saved the sport from evil and corruption! The Mad Bull Group is a corrupt wrestling organization that profits while draining the purity of the sport. Help the Knuckle Bash team overpower evil and convert the Mad Bulls to their side! Our young wrestlers know how millions of young fans look up to them as role models, It’s for them they must take a stand! In a Chicago hotel, a secret meeting has been arranged. The heroes decide to obtain the services of a powerful master of NINPOW. His name is “Hiyate”. He resides in Hong Kong and is known to be a skillful and cunning fighter. The Mad Bulls want him, too, and will stop at nothing. The heroes can’t let this happen. Even if it means... Unfortunately, even our heroes were once members of the Bull Group. But once the Bulls learned our heroes didn’t believe in their ways, they were labeled as traitors.
Our young wrestlers journey to BATTLE KING- DOM, headquarters of the Bull Group. It’s rumored that one of them wants out of the organization, It seems he doesn’t agree with their methods... After numerous battles, our heroes succeeded in destroying the Bull Group. The world is free of their evil ways. The story of our heroes has become legendary. Children can again look up to and dream of becoming wrestling heroes themselves!
What a Knuckle Bash it was!
Game Characters
¢ Clash — The one member of our heroes who hides his true identity behind a mask. Possessing great strength and the famous “Flaming Tailspin,” he’s sure to heat up the action!
- Dice — A real fan of Rock and Roll, Dice takes his electric guitar everywhere he goes. It really comes in handy when he battles with the Mad Bulls. Don’t come a-knockin’ when this man’s a-rockin’!
- Devo — The suave guy of the trio. His good looks have resulted in many a movie offer. Too bad, Hollywood, Devo’s got a job to do! His “Blue Wave” throw will surely wash up those Bulls.
Knuckle Bash Universal Kit
Game Play Description
Knuckle Bash is a one- or two-player simultaneous fighting game. It’s a fun, easy-to-play fighting game with colorful graphics. In the game, players fight to save the sport of wrestling from evil criminals! Players select from three colorful characters. As enemies are defeated and converted, the choice expands to five. Our band of heroes travels by motorcycle to brawl with the Bulls in hotels, shipping docks, and even football stadiums! To finish the game, players must battle their way through ten stages. Players select one of two stories to Installation,
start. No matter what route players choose, they must fight the monstrous Pig Man and the Evil Kabuki in the end. Mixed into the action are Bonus Rounds where players pound on the buttons to decide who throws the knockout blow! Players each use a joystick and two buttons for an assortment of moves, including an impressive signature “Big Strike Home” move. Help our heroes save the wrestling world from corruption and evil!
1-9
Knuckle Bash Universal Kit
1-10
CHAPTER 2
Self-Test and Troubleshooting
INTRODUCTION
HIS CHAPTER contains a descrip- additional equipment to perform the self-test.
tion of the self-test and two trouble- You should perform the self-test when you
shooting tables for your Knuckle first set up the game, each time you collect the
Bash” game. Use the self-test pro- money, or when you suspect
. - Ths cedure to check the condition of game failure. # This chapter
the game circuitry and controls. shows the screens in the self-test
You will see the self-test informa- and explains each of the tests. The
tion on the video display and hear screens and explanations are
the sound test information through arranged in the order they appear
in the self-test. the speakers. You do not need any
Sel£-Test and Troubleshooting
Entering and Exiting
the Self-Test
To enter the self-test, push switch 3 on DIP Switch 1 to the on position (located on the game PCB). See Figure 3-3 of this manual, which highlights the locations of DIP Switches 1 and 2. Exit the self-test by returning this switch to the off position.
Select Test Screen
Use this screen to choose which of the three screens you want to see (see Figure 2-1). Move up and down the list by moving the left joystick. After the arrow indicates your selected screen, press A or B button on the Player 1 (left) side. The Select Test screen also displays two test patterns for checking the color and convergence of your video display. Their uses are explained below.
Color Test
The color blocks in the center should be four bands (red, green, blue, and black/white from top to bottom), each with a color scale from bright to dark, left to right. If the screen does not match this description, adjust the video display as described in the video display manual.
Convergence Test The convergence test pattern has a white grid ona black background. Check the following: ¢ The grid lines should be straight within 3 mm, and the lines should not have excessive pincushion or barrel distortion.
- The convergence of the lines on the white crosshatch horizontal and vertical lines should be within 2mm. If these screens do not meet these criteria, adjust the video display as described in the video display manual.
Returning to the Select Test Screen You can exit from any of the three screens and return to the Select Test screen as follows:
- Change the toggle 3, DIP switch 1, back to off and on again, or ¢ Turn the game power switch off, then on again.
2-2 Kauckle Bash Universal Kit
DIPSW DISPLAY ‘SOUND CHECK
Figure 2-1 Select Test Screen
Input Check (Switch Test)
Use this screen to check all the coin switches, control panel switches, and joystick switches in this game (see Figure 2-2). This screen also displays the status of the sound circuitry, the RAM and the ROM. To check the functioning of each switch, activate it and watch the corresponding Offmessage change to On.
test switch to Pin 15 of the JAMMA edge
connector.
If the On and Off messages do not appear correctly, check the harness connections, switches, and joystick controls.
INPUT CHECK coms
crrng
SEuEct BUPTONL
LEVER U > b z
Figure 2-2 Input Check Screen
Knuckle Bash Universal Kit Self-Test and Troubleshooting
Opi Switch Settings Result
| Discount to Continue | 1 Off | No discount ¥ |
10n Discount
| Picture Orientation | 2 Off | Normal ¥ |
20n Reversed picture
| Self-Test (Function Check) | 3 Off | Normal game play ¥ |
30n Test mode
| Sound in Attract Mode | 40ff | Sound is on Ww |
40On No sound during attract mode
| Game Cost in U.S. | 5 Off | 6 Off | 1 coin for 1 play ¥ | For SW1 or left mechanism |
| 50On | 6 Off | 1 coin for 2 plays | ||
| 5 Off | 6On | 2.coins for 1 play | ||
| 50On | 6On | 2 coins for 3 plays | ||
| Game Cost in U.S. | 7 Off | 8 Off | 1 coin for 1 playw | For SW2 or rignt mechanism |
| 70On | 8 Off | 1 coin for 2 plays | ||
| 7 Off | 80On | 2 coins for 1 play | ||
| 70n | 80n | 2 coins for 3 plays |
Alternate:
| Game Cost in Eurcpe | 5 Off | 6 Off | 1 coin for 1 play ¥ | For SW1 or left mechanism |
| 50On | 6 Off | 2. coins for 1 piay | ||
| 5 Off | 6On | 3 coins for 1 play | ||
| 50On | 6On | 4coins for 1 play | ||
| Game Cost in Europe | 7 Off | 8 Off | 1 coin for 2 playsW | For SW2 or right mechanism |
| 70n | 8 Off | 1 coin for 3 plays | ||
| 7 Off | 8On | 1 coin for 4 plays | ||
| 70On | 80On | 1 coin for 6 piays |
v Manufacturer's recommended settings. See Table 2-3 for details on how to enable either the U.S. or European coin settings.
DIPSW (DIP Switch) Display
Use this screen to see how all the dual-inline-package (DIP) switch toggles on the game PCB are set. You can view and change the coin and game options on this screen, shown in Figure 2-3, The coin and game option settings are explained in Tables 2-1, 2-2, and 2-3. To change a setting, slide the appropriate toggle on the DIP switch to on or off. The screen will immediately display the change in status. Table 2-1 DIP Switch 1 Settings
oF EXTEND 106000 ONLY
HERO COUNTS 3 NORMAL GAME CONTINUE PLAY ON
7 FOR USA UNUSED
Figure 2-3. DIP Switch Display
2-3,
Self-Test and Troubleshooting Knuckle Bash Universal Kit
| Option | Switch Settings | Resi | |
| Game Difficulty | 1On | 2 Off | A (Easy) |
| 1 Off | 2 Off | B (Normal) | |
| 1 Off | 20n | C (Difficult) ¥ | |
| 10n | 20n | D (More difficult) | |
| Extra Life Granted | 3 Off | 4 Off | At 100,000 and 400,000 points |
| 30On | 4 Off | At 100,000 points only | |
| 3 Off | 40On | At 200,000 points only ¥ | |
| 3On | 40n | No extra life granted | |
| No. of Lives (Hero Counts) | 5 On | 6On | 1 life |
| 5 Off | 6 Off | 2lives¥ | |
| 5 Off | 6On | Slives | |
| 5On | 6 Off | 4lives | |
| Game Mode | 7 Off | Normal mode ¥ |
70n No-death/stop mode
| Continue Play | 8 Off | Continues play at same level after inserting more coins ¥ |
80n No game continuation
v Manufacturer's recommended settings.
Table 2-2 DIP Switch 2 Settings
| Op | Switch Settings | Result | |
| Coin Settings | 10n | 2 Off | For U.S. coins. Install O-ohm resistor into location JP4. |
| 1 Off | 20n | For European coins. Install 0-ohm resistor into location JP3. |
Table 2-3 DIP Switch 3 Settings
Sound Check Screen
Use this screen to check the sound circuitry (see Figure 2-4). Play various sounds: if several of them are not audible, you may have a bad sound ROM or audio circuit- SOUND CHECK ry on this game board. SOUND NUMBER
Pushing and releasing the left player joystick towards ight i <i LEVER : SOUND # SELECT
the right increments the sound number;; if you hold that Sorecned. piace oem
joystick to the right, the software cycles through all BUTTON 2 : SOUND STOP sound numbers. To start playing a sound, press button Aon the left side. To stop the sound, press button B.
Figure 2-4 Sound Check Screen
Troubleshooting
Table 2-4 (troubleshooting) in this chapter can help you pinpoint problems in your game. This table lists possible sources of problems in various parts of the game.
Knuckle Bash Universal Kit Self-Test and Troubleshooting
Problem Suggested Action
Coin Mechanism Problem 2. . Check the wiring to the coin switch and counter. . Test the coin switch with the sound test screen in the self-test.
Game Play Problem 2. 3. . Check the harness and connectors. . Perform the self-test. Check the voltage levels on the PCB.
Joystick Problems 1.
won
as Has the joystick been lubricated? If not, lubricate it at the location shown in Figure 3-2. . Check the harnesses and connectors. . Check the switches on the joystick by using the Input Check screen in the self-test procedure. . Ifyou took the control apart, have you reassembled it correctly? . Make sure all the parts on the control are in good repair. Repair or replace parts.
Sound Problem TQaRwNM- . Is the speaker volume turned up? (Volume is adjusted on the game PCB.) . Check the voltage on the game PCB edge connector. . Check the wiring from the PCB to the speaker. . Check the voltage level to the PCB. . Replace the speaker.
Video Display Problem Screen is dark. OnakoOn
~
9. . Is the game plugged in? . Is the game turned on? . Are the connections good? . Is the line fuse good? . Is the display brightness turned up? . Are the edge connectors on the game PCB and JAMMA Filter PCB tightly connected? . Check all of the items below. If you answer no to any question, you have a problem with the video display, not with the game circuitry. See your video display service manual. a. Do you have power to the video display? b. Are the video display’s filaments lit? c. Do you have high voltage to the video display? . Are the voltage levels to the video display PCB correct? (Power voltage is 100 VAC or 110 VAC, depending on the type of video display. Video signal voltage is 0.5 to 3.5 Volts.) . If the level is not correct, check the connectors and the harness.
Only a colored screen appears. You probably have a serious RAM problem. Display area wavers or is too small. 1. 2. Do you have correct power voltage to the video display PCB? . Do you have correct high voltage to the video display? Picture is wavy.
- Is the monitor ground connected to the monitor? 2. . Are the syric inputs connected properly? Picture is upside down. Check DIP Switch 1, toggle 2, on the game PCB. This toggle should be in the off position for anormal screen. Another possibility is if you serviced the display, you may have connected the wires incorrectly. Switch the horizontal or vertical yoke wires on the display. Convergence, purity or color problems. Use the screens in the self-test to adjust the video display. Use the adjustment p rocedures in your video display manual.
Picture is not centered. Use the centering procedures in your video display manual.
Table 2-4 Troubleshooting Table
2-5
Self-Test and Troubleshooting
Message Type o
Work RAM Err
Color RAM Err
Free RAM Err
AVRAM Err
BVRAM Err
CVRAM Err
ROM Err
Sound Err Working RAM
Color RAM
Free RAM
A Video RAM
B Video RAM
C Video RAM
Program ROM
Color ROM
Table 2-5 RAM and ROM Error Messages Knuckle Bash Universal Kit
Removing and Replacing the Joystick Control
The joystick control is shown in Figure 3-2. If you want to repair the joystick control, disassemble it by remoying it from the control panel. To repair the joystick, disassemble it by removing the retaining ring at the bottom of the shaft. To replace any of the four switches, remove the two screws that secure each switch.
CHAPTER 3
Parts Illustrations
INTRODUCTION
HIS CHAPTER provides information the number of this manual, and the serial
you need to order replacement number of your kit. ¢ With this information,
parts for your kit. All the common we can fill your order rapidly and correctly.
hardware parts sold with this We hope this will create
kit, such as screws, less downtime and more
nuts, washers, and so profit from your games.
on, are included in
these parts illustrations. Service phone numbers
When you order parts, ey <=) are listed on the inside front “he ay give the part number, part name,
Parts Illustrations Knuckle Bash Universal Kit
Items Not Shown | 038158-01 Product LD. Label (att tho ack 0394s0-01 He eases || Foc Compliance Label oeatsz-ot I Warring Label 181026-003 40" LD. Spit 99-0 Foro Beads frend
Kit InstaiaonInsuctons
051501-01 Bezel
051679-01 Game Instruction Label
75-5112B #10-24 x 9/4" Cartiage Bolt (12 places) 475014-1040 sane) #10 Flat Washer Side Panel Decal (12 places) (2 places) 17026-0040 #10-24 Zinc Nuty A047292-01 Washer Assy. JAMMA Filter (12 places) Board Assembly 155034-001 NOINC @-Pouton eee mi i Board Assembly lack Joystick 178373-0108 (2 places) .50" Straight PCB Standoff with Adhesive (2 places) 72-6608S ‘#6 x 1/2" X-Rec, Pan-Hd, Type AB Screw (4 places)
051678-01 Pushbutton LD. Label
160044-001 051656-01 | | Snap-Action Switch | | 951500-01 Control Panet (6 places) Control Panel Decal Cover 178237-001 Red Button Assy. (6 places)
Figure 3-1 Parts of Knuckle Bash Universal Kit A051497-01 C
3-2
Knuckle Bash Universal Kit
99-215030 Black Knob and Shatt
99-215031 Pivot Cylinder
99-215018 Spring 1" Diameter
99-215011 #8 x.75 Screw (4 places)
99-215036 Microswitch Actuator
99-215015 ERing
Figure 3-2 Joystick Assembly 171099-001 Parts Illustrations
99-215032 Washer
99-215033 Hub
99-215035 Z-Stop
99-215034 Bracket
160044-001 -187 Microswitch
99-215010 #4 x,75 Screw (8 places)
99-215031 Pivot Cylinder
Parts Ilustrations
E Dsanceras | 3 ord 7 RB?
: itce—] : =
Sis | ae + Oo ¢usa7a co
: jo $s] FG) ees]
Are both DIP switch locations, Use for setting game and coin options.
Figure 3-3, Knuckle Bash Game PCB Assembly 155034-001
3-4 Knuckle Bash Universal Kit
Sea ¢ sToeae) y sy aaa] , +Loeoae y seam] 5 =
ae ne ae aa ae aie eal ie pa Enel ae ae onal aes ae
Kauckle Bash Universal Kit Parts Illusteatrations
OP F
z Fe §
Figure 3-4 JAMMA Filter PCB Assembly A047292-01 B
JAMMA Filter PCB Assembly
Parts List
Desig- Desig-
| nator | Description | Part No. | nator | Description | PartNo. |
| C1-8 | 2200 pF, 50V, 3-Pin EMI Filter Cap. | 140006-222 | C32, C33. | 270 pF, SOV, 3-Pin EMI Filter Cap. | 140006-271 |
| €9,C10 | 270 pF, SOV, 3-Pin EMI Filter Cap. | 140006-271 | C34-46 | 2200 pF, SOV, 3-Pin EMI Filter Cap. | 140006-222 |
| C11-31 | 2200 pF, 50V, 3-Pin EMI Filter Cap. | 140006-222 | n | Connector, 56 Ckt., .156 Cir, RT | 179240-056 |
uts Illustrations Knuckle Bash Universal Kit
NOTES
3-6

This page is a drawing, shown as the original scan.
Schematic Diagrams Knuckle Bash Universal Kit
Figure 4-1 Knuckle Bash Game PCB Schematic Diagram Circuit Overview Diagram 4-2
Figure 4-2 Knuckle Bash Game PCB Schematic Diagram Graphics CPU
Schematic Diagrams
4-4 Figure 4-3, Knuckle Bash Game PCB Schematic Diagram Graphics Control Unit Knuckle Bash Universal Kit
Figure 4-4 Knuckle Bash Game PCB Schematic Diagram Sound and I/O Processor
Schematic Diagrams
a Raz
i AOMF TANTAL 68 Knuckle Bash Universal Kit
E>
leva S O.1MF FILM [YR ax y ee i t
{ AOMF TANTEL H + => % | I . a ho ¢ =a as \ TT Sine rerun Ry acho aan
Figure 4-5 Knuckle Bash Game PCB Schematic Diagram Vertical Line-Counter (top) and Audio Amplifier (bottom)
Knuckle Bash Universal Kit Schematic Diagrams
Figure 4-6 Knuckle Bash Game PCB Schematic Diagram FM and ADPCM Sound Generation
Figure 4-7 Knuckle Bash Game PCB Schematic Diagram Color Pale k-up and Vid tte Look-up and Video Out
Schematic Diagrams
Figure 48 Knuckle J Bash Game PCB Schematic Diagram [AMMA and I/O Interface
Schematic Diagrams
FROM Aric BOARD
4-10 at
2 O-—a CN 3 Oa Juss Wome sissy 5 Oe 6 Ow tote 70> KCY 8 Oe srenTRe 9 Ome LLOLK? me J1SPARIM © HTUDCND 12 Ome JLGRTEN 13 Omen ISIN 18 O——w LS RY, 15 O-——a JFL Lb O——-w uke 17 Oa LS TART 18 O—# s1uran 19 O-— spon 20 Orem ELLE IZA 24 Oa vinta 22 O——8 JAF TRES 23 Oa stupas 24 Oa bie: 29 O——9 JILL TAD 26 0-4 ini. 2¢ O-——# GND 28 G—-* GND O-——# END 4 oN Oa sy On iy
o- KEY © JICNTRA os vitor Oa sists na Aur Oe aR oa jive Oa JAVIDEND oa sasiitst oO s30cDN Crary opie ——# J2000NLB oa ALE TaR oa arial oa Fret pA Oa JauP28 8G O-——# JDrHR Cc Ow LEFT bb O—— = JARI EE O——" OND FF O——# xp Knuckle Bash Universal Kit
#190
ces a Jeb Ap 150
| = | ee00rr | = | ee |
ais
seiey
2200re _
| i | 9 sone | JaCNTRA ean | © scnTR |
WPF aq 40PF og
| Poon JLUCK? | stuockt e=——]— | Soe seock |
| 2a00Pr | ye | 22c0Pe |
c
| SUSPKRA- © | stgpKRt e | + s9PKRt+ | ||
| LAUREN #—— | a | sep | J1RUD® @—— | oe ne |
| of | 2200p | 220007 |
ou 4J3U5DGND eo JASERY ———s wwtoenp 200PF cyp pe St 1 JTLT JaslrtsT ———
| = | Se | 2acoPr |
e1a Saat «acorn ALCON en a JLT 220°F C37 =
| JASTARTZ — | ps state | vastanrs @———-[ =n pen TFT |
| 2 e200°F | = | ~ 2200Pr |
L cs
| fon owen | spona-——J | Sn on |
AUP 2A
JEDONNR #
cay
| =" | JLEFT2A | HILEE FA an |
2200°F cyt =F 2e00PF
| marr | JRTON | EA |
pe
| ce. | a | cas | pal |
an LOPE hn eR
| 2200°F | 43 | U sen0eF ern | ||
| fren | i | A | ||
| a | t | sin | | | {ae arin |
Lye
=
| oun | : | cn | 7 | ||
| ADIN 9 | —s srownan | JAD | a | ae ae | BOA |
| FS | APORPE pe | spaany | |||
| JNLEFTED | [nner JUTE | JULIOTER pen fe nee na ILC |
yar us veh me
| RTan ap | - ana sete | nate | ne | em ARTE |
ena
Figure 4-9 JAMMA Filter PCB Schematic Diagram ‘A047292-02 A
. Knuckle Bash Universal Kit
TO GAME HARNESS
JME, GND #=——0 JanMA-A GND JenMe-B Jvsy Seva ett JaMHA-E JOMNA-F ansia- JCRTR? Java JLOCK? JRMIIK, JSPERL- JAMAL SAUDGND #0 JP GREEN @-——-- JHMA-N SYNC e——O JeMan~P JSERY &——O JAMMA-R STILT & SAMA S IREOIN =O JFIMA-T JSTARTZ © JAMMU UP 28) weeny sooHNzN ARMA H JAMMER apeneY JRMMA-Z JAAR =HA JDOHNZB #0 JANHA-BB LEE T2B men—-O JeMIHAACO JRT2B Jesm-Db GND #9 JAMMA-EE END 8-0 JAMMO-FF
sant JPM JAMMA-2 Jetta eRe J-5U 0 JAMHA-S, JHZU HO JOM “0 JANMA-7 SONTRA #——O Jenne JLCCKT ®——O JAMIA-9 JSPRRL4 @—--O JAMHA-10 SAUD man JAHMA LL JANMA~12 JAMIE AVIDEND @——O JAMMA-14 JSLFISS *——O JAMHa-15 JLCOLN <2 JAMMA-16 USTARTA #——O JAMMA-Le JUPLA @——-O JAMNA-18 JIDOWNLA sO JFMAE=19 JLEFTIA =O JeMMA-20 JRTLA §—o Jawine24 JFIREL e——O Jannia-22 JUPLB 0 JaMMA-23 JOOWNIB §—-O JAeR-24 JLETTID #0 JAMMA-25 SRM 26 srt18, GND
Figure 4-9 JAMMA Filter PCB Schematic Diagram, Continued coND3 COND? cesy> cou +5) ceagva KEY CECNTRR > COMLOCKR CSPKRL-) CAUD GNDD COREEN} SYNC > (SERVICE) faptee) CoOTNRD CSTARTRI cupRA? CDORNRAD CLEFTIND CRIGHTRAD ROUT TONS > CRAUTTONE > REWTTONS > CLUFTRBD cCRTONTRED END) COND?
eNDD ten) c+sv9 c45v) CBU) aren KEY SCCNTRL (E-LOCKL CSPRRL+3 CAUDs 3 CRED? CBLLUES CVTD GD? GSELFTIESTD COUN. > CSTARTLD CUPLAD CDOANLAD cLerTiaa CRICHTLAD LEUTTONS. > ELBUTTON2 9 EC LBUTTONS 2 CLEFTLBD CRICHTLED RN? cONDY
A047292-02 A
- Ht MTG HOLE
_@ me OIE wou
nT Howe Schematic Diagrams
4-11
Schematic Diagrams Knuckle Bash Universal Kit
pe pele ed fel eel fe pele el fede ed pel ele ed peeled eel pele pel pele el el fel ele
Seller warrants that its printed-circuit boards and parts thereon are free from defects in material and workmanship under normal use and service for a period of ninety (90) days from date of shipment. Seller warrants that its video displays and laser-video disc players (in games supplied with displays and video-dise players) are free from defects in material and workmanship under normal use and service for a period of thirty (30) days from date of shipment. None of the Seller's other products or parts thereof are warranted, If the products described in this manual fail to conform to this warranty, Seller’s sole liability shall be, at its option, to repair, replace, or credit Buyers account for such products which are returned to Seller during said warranty period, provided:
- Seller is promptly notified in writing upon discovery by Buyer that said products are defective;
- Such products are returned prepaid to Seller's plant; and (©) Seller's examination of said products discloses to Seller's satisfaction that such alleged defects existed and were not caused by accident, misuse, neglect, alteration, improper repair, installation, or improper testing. In no event shall Seller be liable for loss of profits, loss of use, incidental or consequential damages.
Except for any express warranty set forth in a written contract between Seller and Buyer which contract supersedes the terms herein, this warranty is expressed in lieu of all other warranties expressed or implied, including the implied warranties of merchantability and fitness for a particular purpose, and of all other obligations or liabilities on the Seller's part, and it neither assumes nor authorizes any other person to assume for the Seller any other liabilities in connection with the sale of products by Seller.
fede pepe pede pede ped ee ee pede fed pe ped ped pede ed pel fed pel feed fel ele el fell
The use of any non-Atari parts may void your warranty, according to the terms of the warranty, The use of any non-Atari parts may also adversely affect the safety of your game and cause injury to you and others. Be very cautious in using non-Atari-supplied components with our games, in order to ensure your safety. Atari distributors are independent, being privately owned and operated. In their judgment they may sell parts or accessories other than Atari parts or accessories. Atari Games Corporation cannot be responsible for the quality, suitability or safety of any non-Atari part or any modification including labor which is performed by such distributor.
ATARI
GVAUM) ES
Atari Games Corporation
675 Sycamore Drive
Milpitas, CA 95035
U.S.A.