Mania Challenge
Mania Challenge (set 1) (Technos Japan (Taito America license), 1986) · Document · 12 pages · 9 sections · original scan
n COPYRIGHT 1906 INC
TALI: ahh fa CORMUtes ty aa
2350 Brickvale Dr LICENSED BY TECHNOS, JAHAN EE -EW Grove vitage. 1b 60007 312-595-2828, DISTRIBUTED By MEMETRON. INC. TELEX #210227 ANSB MEMORY
-VIDEO GAME OPERATOR:
Don’t Get Involved In A Federal Crime. Don’t
Buy Or Operate Copy Or Unauthorized Boards In
Your Games.
Every operator who buys or operates a counterfeit or unauthorized board (imported or domestic) is contributing to the end of our industry and committing a FEDERAL CRIME. New criminal laws have recently been enacted that provide for maximum penalties of $250,000 or five years in Prison or both, per offense. EACH GAME FFENS
a
Tf vote haw any infonmation about civ unauthoriced panes in the United States, contact your local FBI or, Cette 205 The Strand Suite 3 Alexandria, Virginia 22314 (703) 548-8044 All information will be treated in confidence.
Pac-man,Ms Pac-man and Galaxian are trademarks of Bally Midway. Power supply. MEMETRON will not assume responsibility for any p.c.boards returned with damage caused by the introduction of improper voltages. Pac-man, Ms Pac-man, Galaxian and other select games DO NOT provide a D.C. ba Vz aD On <m AT on me re 7A,Ft12 xmif< mo noc ma AT ov ano cm on -5s an pe ov mo ar cad VOLT
WARNING
HOMEZNADHNZONNANKHN SEBO nommoomzortoouozor~r2ar 2un3z0 OAZZM22S ZH2rH ZZUMBAIZIMMBVCAZZAZVUMIIOC<NH omoAmMrvararpmMmmerpriodt ANZANQKAATH PANONAAH DOA ANDOAMHMPOMARHRADINZH HMHZ OA ZADGDHH.S ZPpa - ZOus 44zZmMoc GOomYo<coO a al ae zmac2zZa umMmmMaoarw maremman mae o mew ZoOuz MMZ0904dOMoOenDZ oD 4A0nZD DB mon<cneHMm al ma<* zmc4a<oo 4 <mpoz ob - ANHO a PAnNaTALTZzAtA “27 mma oO gzzrmn 4mm MOADHHUD<P<mMNnACMAZ uAPrPAMZzZPCMS rImaps AMPQonaAamor ama am 7nTAMAA Ano noms Oxrum<Ao NZ0THAZrAoS Ma 2 © CHome ammHa 1 uzaomp2zm4n 2 Om: <o = om zr zpo oo7ncy aD De + pouN HaAAVOH Ho Hz zv onoo maaan me ov om-amoa al a mo ou ra ma: ua z NOzAe m o oupca cm ao
- 4° D> pz oD am 340 a ua waz ma oa rc now - mM r m wv
< >
Heme
IMPORTANT
F.C.C.
fe 8 KING KIT CONTENTS
MANIA CHALLENGE FC BOARD
INSTRUCTION MANUAL ex * % CRT PLEXI
- * *# MARQUEE PLEXTI x * ** JOYSTICKS (2)
- * x * CONTROL PANEL OVERLAY ** * * CONTROL FANEL DECALS ** * * INSTRUCTION DECALS
- * e* WIRING HARNESS ee x *
Contact your Memetron distributor for replacement parts.
MANIA CHALLENGE CONVERTS ANY
coOLOR RASTER SCAN MONITOR
THAT 1s OR CAN BE MOUNTED
VERTICALLY
Parts salvaged from your old game are required to complete your kit. These salvaged parts must operate perfectly for the converted game to perform properly and safely.
MAKE SURE YOUR POWER SUPPLY AND MONITOR ARE WORKING PROPERLY BEFORE ATTEMPTING CONVERSION!
CABINET
Reconditioning the cabinet is one of the mast important things that you must do. Remove all old graphics and artwork from the cabinet. Clean the cabinet, and paint if neccesary. Remember... A new game promotes player interest. This conversion is a new game... MAKE SURE IT LGOKS LIKE ONE.
CONTROL PANEL
- Remove the old buttons, joystick and control panel overlay (note... do net throw out parts! certain items are required ta complete your new control panel.) .
- Refer to suggested control panel layout. (below)
- Drill any new holes that are neccesary.
- Plug any holes that will not be used, a common auto body bondo is probably the quickest filler available.
- Carefully apply the new control panel overlay . Avoid getting air bubbles under the vinyl.
- Once the overlay is in place, use an exato knife to cut out the button and joystick holes.
- Place the new buttons, joystick and instruction decals on the control panel.
SUGGESTED CONTROL PANEL FOR MANIA CHALLENGE
CRT AND MARQUEE PLEXI {wear protective eyewear while cutting plexis)
- The marquee and crt plexi must be cut to fit your game. Do not remove paper mask until this is done.
- Remove old marquee and crt plexi from game.
- Use these to measure and mark the new plexi for cutting.
- The plexis can be cut the same way you cut tile or window glass. We suggest using a scribing knife . Using a straight edge to guide the knife, draw the scriber several times along the edge. Make sure your cuts go from end to end cleanly.
S) Lay the plexi on a table with the scribe mark hanging over the edge. While clamping the plexi to the table apply sharp downward pressure to the other side. Sandpaper should remove any rough edges.
GROUNDING
TO ASSURE PROPER GAME OPERATION AND TO PREVENT SHOCK HAZARD,
MAKE SURE GAME IS PROPERLY GROUNDED. DO NOT USE A "CHEATER"
PLUG TO DEFEAT THE GROUNDING PIN ON THE FOWER CORD!
NOTICE
For safety and reliability, Memetron,Inc does not recommend or authorize any substitute parts or modifications of Memetron equipment.
Use of non Memetron parts and modifications of circuitry may adversely affect game performance.
Substitute parts or equipment modification may vota FCC type acceptance.
Since this game is protected by federal copyright, trademark and patent laws, unauthorized yame conversions mav be illegal under federal law.
This "conversion" principal also applies ta unauthorised tacsimiji+ of Memetron,inc., equipment logos, designe, publications, assemblies and games (or features not deemed to be in the public domain), whether manufactured with Memetron components or not.
cOIN COUNTER
To properly connect a coin counter on MANIA CHALLENGE you will need the following items.
- 12 volt coin counter (1)
- 1N 4004 diode (1)
(see diagram below)
- connect the coin counter wire, (B11 on the PC board) to the anode side of the 1N 4004 diode,and then connect to one lead af the coin counter
- Connect the other lead of the coin meter to the cathode side of the diode, and then connect to +12 volts on your power supply.
- MAKE SURE THE DIODE IS IN FLACE AND HOOKED UP CORRECTLY OR DAMAGE TO THE PC BOARD MAY RESULT!
-- coin counter
-- diode
to l2v -- -- to Bll
IF YOU HAVE ANY QUESTIONS CONTACT YOUR MEMETRON SERVICE REPRESENTATIVE
- (312) 595-2828 *
MAIN HARNESS MANIA CHALLANGE
. SOLDER SIDE PARTS SIDE
| = WIRE/COLOR SIGNAL NAME | PIN NO. | SIGNAL NAME | WIRE/COLOR | GA | ||
| 18 | YELLOW | ~5v | {Al BI | +12V | ORANGE | 18 |
| 22 | VIO-WHT | SPEAKER GND | A2_ B2 | SPEAKER | vio | 22 |
| 22 | BLU-YEL | 1P_PUNCH | A3__ B3 | 1P UP | + ORG | 22 | |
22 BRN-WHT 1p RIGHT AG Ba 1P LEFT BRN 22
| 22 GRAY | 1P_START | AS BS | 2P START | ORG-WHT | 22 | |
| iz 22 | BLK-YEL | 2P_PUNCH | A6 Be | 2P_UP | BLK-ORG | 22 |
| 22 | BLK-RED | 2P DOWN | AT _B7 | |||
| 22 4 BLK-BRN | 2P LEFT | A8 BS | 2P RIGHT | _BLK-WHT | 22 | ||
| i | AQ B9 | 1P DOWN | GRY-YEL | 22 | ||
| ALO B10 | COIN 1 | BLU-GRY | 22 | |||
| All Bll | COIN COUNTER | BLU-RED | 22 | ||||
| 22 | BLU-GRN | 1P KICK | Al2 B12 | 2P KICK | BLK-GRN | 22 |
| 22 | GREEN | VIDEO GREEN | Al3 B13 | VIDEO BLUE | BLUE | ||||
| |. 22 | RED |_VIEDEO RED | ALG B14 | VIDEO SYNC | WHIT | |||
| 7 | Als BLS | ane | _ | |||
| 18__| BLACK | | | GND | Al6 B16 | GND | BLACK | 18 |
| 18 | BLACK | GND | Al7 B17 | GND | BLACK | 18 |
| 18 | RED | +5V | Al8 B18 | +5V | RED | 18 |
DIP SWITCH SET TINGS
DIP SWITCH 1
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
© Coin-A
| OFF | OFF | | | 1 Coin — 1 Play | * |
+
| ON | OFF | [ | 1 Coin — 2 Play |
| oFF | ON | Tf | 1 Coin — 3 Play |
ON | ON 2 Coin — 1 Play
| | | Zz | © Coin-B |
| OFF | OFF | | | ° | 1 Coin — 1 Play |
| ON | OFF | a | 1 Coin — 2 Play |
OFF | ON 1 Coin — 3 Play
| ON | ON | 2 Coin — 1 Play |
_ a Sound for Demonstration OFF |w ‘Sound *
ON | No sound 2 Z
L @ Check i Progen OFF ON ON
ON Invert Pictu
DIP SWITCH 2
=
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| ee | ag,
| L | g | 2 | 2 | g | e | 3 | Degree of Difficulty |
| OFF | OFF | & | 3 | g | g | 3 | g | Normal | |
| 4 | a | a | 4 | 4 | a | ||
| | ON | OFF | ce | fog | S | fad | [oa | fod | : |
| orr | on | mm | m | R | ma | a | R |
ON | ON Difficult
- SUGGESTED FACTORY SETTINGS
MAIN HARNESS MANLA CHALLANGE
MAT MANIA
SOLDER SIDE PARTS SIDE
GA WIRE/COLOR SIGNAL NAME PIN. NO. SIGNAL NAME WIRE/COLOR GA
| 22 WHT-GRN | -5V | Al Bl | +12V | YELLOW | 22 |
| 22 RED-GRN SPEAKER GND A2 B2 SPEAKER | ORG-GRN | 22 | |||
| 22 YEL-RED | 1P PUNCH | A3 B3 By UP | ORG-YEL | 22 |
[es -
| 22 BRN-YEL ad 1P RIGHT | A4 B4 & 1P LEFT | BLUE-YEL | -22 |
| 22 VIO-WHT ‘1p START | AS BS 2P START | VIO-YEL | 22 |
| 22) ORG-WHT 2P PUNCH | A6 B6 2P UP | BLK-YEL | 22 |
| }— 22 RED-WHT 2P DOWN A7 B7 :
22 BLUE-WHT 2P LEFT A8 B8 2P RIGHT BRN-WHT 22
| AQ B9 2» DOWN | GRY-YEL | 22 |
Al1O B10 COIN 1 BLUE-GRY 22
| | | All Bll COIN COUNTER GRN-GRY | 22 | |
| 22 PINK-WHT 1P KICK | Al2 B12 2P KICK | YEL--GRY | 22 |
22 | CRYBEN VIDEO GREEN Al3 B13 VIDEO BLUE BLUE-GRN 22 22 RED-BRN VIDEO RED Al4 B14 VIDEO" SYNC WHT-BRN 22
A15S B15
| 18 BLACK. | GND | Al6 B16 GND | + BLACK | 18 | |
| 18 BLACK | GND | Al7 B17 | GND | BLACK | 18 |
a
| 18 RED | +5V | Al8& B18 +5V | RED | 18 |
VIDEO OUTPUT TO MONITOR
The video output coneists of three similar circuits, one for each of the composite colors red. areen, and blue. Each circuit consists of a 74165 shift register, a 2N2222 driver transistor (with associated biasing resistors). and a connecting harness between the circuit board and the monitor.
The video harness is designed so thet either end can plug into either the circuit board or the monitor. The function of each of the wires is as follows:
top pin YELLOW - HORIZONTAL SYNC THESE WIRES ARE WHITE — VERTICAL SYNC LISTED AS THEY BLACK - VIDEQ GROUND AFFEAR CIN THE MAIN BLUE - BLUE VIDEG S1GNAL CIRCUIT BOARD. GREEN - GREEN VIDEW SIGNAL bottom pin RED ~ RED VIDEO SIGNAL
The circuit board supports either positive or negative sync c1ignals. These can be adiusted with the twa jumpers in the upper right hand corner of the circuit board. The monitor that 1s supplied with the game uses positive sync signals.
Refer to the VIDEO RAM page of the schemetic diagram to supplement the following discussion.
The video ©1gnal begins at the 74165 shitt registers (F12,.B12, and G12). Video data 1© parallel lceded inte each 74165 wien FLSR (pin 1) pulses low. CLS is constently pulsing to shift the video data aut serially et pin 9. As it stands, siqnal ig not strong encugh te drive the monitor, so a transistor 15 used as a butter. Fin 9 of the 74165 pe othe 2N2Z2ZZ2 and this in turn drives the monitor. The 470 ohm resistors are for biasing the transistors. They are located inside the SIF packages on each side of the transietors.
NOTES ON THE SATELLITE BOARD a2
e The satellite circuit board serves two important functions. First, it contains the program that the CPU requires in order to make the game run. Hecause the entire program is stored on this one small circuit board, it becomes very easy to convert yous game to another by simply changing satellite boards or by changing individual ROM memory chips on the board.
The second major function of the satellite board is that it contains all of the bookkeeping information for that game. Through new RGM/RAM technology, this information can be held in a non-volatile memory without a battery backup.
If you hold a satellite board with the chips facing you and the edge connector up, the two leftmost chips are RAM memory. The CPU not only stores the bookkeeping data here, but also uses 1t to keep track of the progression of the game. If there is a loss af power in the middie of a game, these chips remember where the game left off. When power is restored, the game can continue without any loss of continuity.
The set. of large chips next to the RAM is the game program. Tf you have a JOKER POKER game, there wiil be three program chips and one empty socket. If you have a 2-IN-1 game, there “will be four pragram chips. The program is stored in EFROM memory, therefore it is advised that the white labels on the chips not be remaved. Tt is possible that the program may be lost if the quartz window under the label is exposed to teo much ambient Light.
is used for deccding and accessing Cin a JGKER FOKER game, this this chip is a The single rightmast chip the individual ROM memory chips. will be a 7408. If you have a 3-IN-1 game, FAL14R4.
THE FOLLOWING SYMPTOMS CAM RE LINEED TO A FAULTY FALIL6R4:
“NO GAME" APPEARS ON THE SCREEN AS YOUR CHOICE OF GAMES.
THE SAME GAME NAME APPEARS AS ALL THREE CHOICES UPON INSERTION OF A COIN.
If a ROM memory chip is faulty, it will be detected upon power-up of the game. €@ “ROM BAD" message will flash on the screen.
A faulty RAM memory chip may result in erratic bookkeeping figures. It will also cause a random number of credits to appear on the screen upon power-up.