CATHODE RAY TOMES

Ridge Racer Sitdown

Ridge Racer (World, RR2 Ver.B) (Namco, 1993) · Document · 24 pages · 2 sections · original scan

Page 1

RIDGE RACER

Operators Manual

Page 2

1993 PI@MCO Lea - alt rights reserved

No part of this publication may be reproduced by any mechanical, photographic or electronic process, or in the form of phonographic recording, nor may it be stored in a retrieval system, transmitted or otherwise copied for public or private use, without permission from namco Ltd.

Published by: BRENT LEISURE Ltd. Unit 1 Brent Crescent, London. NW10 0QT

Phone:- 081-965-0550 Fax:- 081-961-0574

Page 3

Contents

  • SPECIFICATIONS o.oo cece cseseescsssescesneseesnesesssnesesusneseeceueaeeseneseeceneaeesenans
  • PRECAUTIONS 2-1 Cautions When Installing 2-2. Caution When Handling. 2-3. When Transporting. .....
  • MAJOR COMPONENTS. This is already fitted at the factory ...
  • INSTALLATION 4-1 Connecting the Main Body As: 4.2 Adjusting the Level Adjuste 4.3 Fixing the Signboard Assy .
  • SIDE PANELS MIBIWUALVHAUA 5-1 | Removing the Side Boards (R) and (L) .8 5-2 Removing the Dashboard Covers (R) and (L) .8
  • ADJUSTMENTS 9 6-1 Turning on the Power .. 9 6-2 Switches for Adjustments =] 6-3 Test Mode .. - 10 6-3-1 Setting the Game Fee and So On (On the Coin Options Screen) .1l 6-3-2 Changing the Game Settings (on the Game Options Screen) . 12 6-3-3 Switch Test c..cscssseocesvesnssesseorasensssscastsoaves 13 6-3-4 Sound Test (Adjusting the Sound Volume) 14 6-4 Adjusting the Game After Replacing Parts (Initializing the Game) .. 15
  • HOW TO PLAY wee cece csseseccseee ces sneecessneecensneesesneseenaneaees 6 8-1 Removing the Game Printed Circuit Board (PCB) 17 8-2 Removing the Shield Case............ 8 8-3 Removing the Power Control Panel . 8 8-4 — Signboard Assy .......ccceeeeeees 18 8-4-1 Replacing the Fluorescent Lamp 18 8-6 AB Pedal Assy (Replacing the Control) ... 19 8-7 Clutch Pedal Assy csueae the Micro Switch) . 8-8 Steering Assy ... teens seeseseseseaeseasseaes 8-8-1 Replacing the control Seiawensesess 8-8-2 Replacing The Steering Whee! 8-9 Gear Shift Assy (removing) 8-10 Replacing the Speaker . 8-11 Replacing the Monitor . _
  • PARTS LIST uo. ccc cccecceseesescsescsesescsescsesesesescsesesesescsescseseseseecseseseseecseesseseaeas . 23
Page 4

1. SPECIFICATIONS

POWER SUPPLY:

MONITOR:

DIMENSIONS: When Assembled: When Divided: Body Base

WEIGHT: 220 / 240 Volts AC

Hantarex 33" Polo Colour Monitor with auto degause

1210 (w) x 2015 (d) x 2000 (h) 1210 (w) x 1190(d) x 2000 (h) 810 (w) x 1250 (d) x 1240 (h)

When Installed: 358kg When Divided: Body 258kg Base 100kg

ACCESSORIES Keys: (Cash Door) ...... 2 (Coin Door) ...... 2 (Back Door) 2 Instruction Manual ..............0.. 1

=<

0002

Page 5
  • PRECAUTIONS

2-1

2-3 Cautions When Installing.

This game is designed for indoor use only. The game must not be installed outdoors or

under the following conditions:

a. In areas directly exposed to sunlight, high humidity, direct water contact, dust, high heat or extreme cold.

b. In locations that would present an obstacle in case of emergency, i.e. near fire

equipment or emergency exits.

c. Onan unstable surface or subject to floor vibration.

Caution When Handling.

a. AC power must always be turned OFF, and the game disconnected , before

replacing any parts or connecting/disconnecting connectors. b. When unplugging the game from an electrical outlet, always grasp the plug, not

the mains lead.

c. The machine must be earthed with a securely connected earthed plug.

d. Care must be taken at all times to avoid electrical shock when inspecting or adjusting the game, especially around the monitor.

e. Adjustment is required whenever the game PCB board, ROM, steering Assy, AB

pedal Assy or control are replaced. See "6-4 Adjusting the Game After Replacing

Parts" on page 15.

When Transporting.

a. Do not subject the game to physical shock when transporting or moving it.

b. Always return the levellers to the extreme UP position before moving the machine. c. Take care not to rope any moulded (plastic) parts when transporting.

d. Always split machine into two parts before moving or transporting.

Page 6
  • MAJOR COMPONENTS

Rear cover

Shift Assy

Power switch

Steering Assy (|

Seat Assy Signboard Assy

Main Body Assy

Dashboard Assy

Coin/Service door

Cash door

Seat Base Assy

AB Pedal Assy

Clutch Pedal Assy Level Adjuster ~~

Page 7
  • INSTALLATION

Locate the two washers and 16 M10 fla

4-1 Connecting th connection plates, 16 (M10x30 ) hex head bolts, 16 M10 spring

it washers.

e Main Body Assy and the Base Assy

  • Place the main body Assy and the base Assy in the installation site.
  • Connect tl e connectors of the main body Assy to that of the base Assy.
  • Fix the main body Assy to the base Assy with two connection plates and sixteen hexagonal

4.2 Adjusting the

Adjust the level for the main bor bolts (M10 x 30), spring washers and flat washers.

Level Adjustors

adjustors of the main body Assy and those of the base Assy (four each dy Assy and the base Assy) with a wrench (24mm) so that the casters are lifted from the floor surface by about 5mm. Then install the product stably and back up the loc nut to lock the adjuster.

4.3 Fixing the Signboard Assy

The signbs This is already fitted at the factory

ard Assy is heavy and it is recommended two or more persons perform the following operations.

  • Connect the connector of the main body Assy and that of the signboard Assy. Insert the Assy. bottom of the signboard Assy along two protrusion of the main body
  • Fix the signboard Assy to the main body Assy with two flange sockets (M6 x 12)
Page 8
  • SIDE PANELS

5-1 Removing the Side Boards (R) and (L)

  • Remove eight torque bolts (M5 x 12), then the monitor panels (R) and (L).
  • Disconnect the connector and remove six hexagonal bolts (M6 X 30). Then remove the side boards (R) and (L).

5-2 Removing the Dashboard Covers (R) and (L)

Remove five torque bolts (M5 X 12), then the dashboard covers (R) and (L).

Hexagonal bolt (M6 x 30) Do not remove this bolt. Torque bolt (M5 x 12)

Main body Assy

Monitor panel (R) The monitor panel (L) is located on the opposite side. Connectors

Side board (R) . The side board (L) is located on the opposite side.

The dashboard cover (L) is Torque bolt (M5 x 12) located on the opposite side.

Page 9
  • ADJUSTMENTS

6-1 Turning on the Power

After installing the product, turn on the power. The power switch is located above the mains inlet on the rear of the main body.

6-2 Switches for Adjustments

Open the coin door to find the switches for adjustments.

  • Service switch.

Press this switch to increase the number of credits without incrementing the coin counter.

  • Test switch.

Set this switch to “ON” to enter test mode. You can change the game fee and so on, and perform various tests in Test mode. (See “6-3 Test Mode” on page 10).

SERVICE | TEST r-O SEAT VOLUME SEAT VOLUME LEFT —( ) CH RIGHT

° [COUNTER

Page 10

6-3 Test Mode

  • Open the coin door, then set the test switch to “ON”. The “Menu Screen” appears on the monitor display.
  • Select the item to be tested by turning the steering wheel right or left. The colour of the item you selected changes.
  • Step on the accelerator pedal to display the menu of the selected item. To return to the “Menu Screen”, step on the brake pedal (step on both the brake and clutch pedals on the Switch Test Screen).
  • When the test finishes, set the test switch to “OFF” to return to the Game Screen.

The Test switch must always be “OFF” during normal game mode.

MENU

COINOPTIONS _ | (1) For setting the price of play (See 6-3-1) GAME OPTIONS _ | (2) For setting the game options (See 6-3-2) BOARDTEST _ | (3) For testing the game PCB SWITCHTEST _|(4)_ For testing switches (See 6-3-3) SOUNDTEST __|(5)_ For adjusting the sound volume (See 6-3-4)

MONITOR TEST (6) For monitor adjustments ADSTEST ~__|(7) Fordisplaying the game data collected ABOUT “| (8) For restoring each setting to standard value

IN = STEP ON THE GAS

Page 11

6-3-1 Setting the Game Fee and So On (On the Coin Options Screen)

Select 1 “COIN OPTIONS” on the Menu COIN OPTIONS Screen to set the game fee and so on.

Turn the steering wheel to select the item GAME COST

to be changed, then step on the2 COINS | CREDIT—(a)

accelerator pedal.

. . COIN 1 MECH VALUE Turn the steering wheel again to change

the setting, then step on the accelerator1 COIN COUNT AS 1 COIN—+(b)

pedal (See table 1.) COIN 2 MECH VALUE

1 COIN COUNT AS 1 COIN ——}—__(c) Step on the brake pedal to return to the Menu Screen. BONUS FOR QUANTITY BUY-IN

Note: — The price of play adjustmentsNONE_(d)

are made on the credit board and the coin options should be set as the following table. FREE TEAY

OFF—()

EXIT = STEP ON THE BRAKE

Item Description

(a) Game feeNumber of credit pulses necessary for game creditOne to nineSet to I
(b) Coin 1 mechanism | Number of credit pulses per coinOne to nineSet to 1
  • Coin 2 mechanism | Not Used One to nine
  • Bonus The extra credit given as a bonus when the specified _ | One credit per one coin
number of coins are insertedThree credits per nineSetto NONE

coins

(e) Free playFree play started by stepping on the acceleratorOFF/ONset to OFF
Page 12

6-3-2 Changing the Game Settings (on the Game Options Screen)

Select 2 “GAME OPTIONS” GAME OPTIONS then change the game options. (DEFAULT IN GREEN)

Turn the steering wheel to select | Game DIFFICULTY TIME EXTEND

the item to be changed then stepNOVICED #* ## ##_@
on the accelerator pedal.ADVANCED D ## ## #*a()
EXPERTD #4 ae He_t©
Turn the steering wheel again toLTDe tk be ee@

change the setting, then step on the accelerator pedal LAP

(see table 2).NOVICE2—oC)

ADVANCED 3 ————“—_

Step on the brake pedal to returnEXPERT = 3__]()
to the Menu Screen.TT.3—|—

SPEED KM/H —_+—_ &)

SOUND IN ATTRACT

ON a

EXIT = STEP ON THE BRAKE

Settings of the Game Options Screen

Description Factory setting A (shortest) to H (longest) D A (shortest) to H (longest) D A (shortest) to H (longest) D A (shortest) to H (longest) D

  • Unit of speed KM/H (kilometer) Set for country of use MPH (Mile)
  • Attract sound ON/OFF ON
Page 13

6-3-3 Switch Test Select 3 “SWITCH TEST” to display the following screen.

SWITCH TEST

DIP SW2 12345678 —— | (a) Option switch (SW2 on the CPU) SW3 12345678 ——_ | (b) Option switch (SW3 on the CPU)

STEERING+0000| (0) Steering
GAS+0000—— | (a) Accelerator
BRAKE+0000————_ | (e) Brake
CLUTCHOFF| (f) cutch

SHIFT N SWITCH 1 OFF = — |(g) Shift SWITCH 2 OFF

SWITCH 3 OFF

SWITCH 4 OFF

SERVICEOFF| (h Service switch
COIN 1OFF——— | (i) Coin 1 switch
COIN 2OFF| (j) Coin 2 switch

EXIT = STEP ON THE BRAKE AND CLUTCH

The status of the option switch SW2 on the game PCB (CPU-PCB) is indicated here. The status of the option switch SW3 on the game PCB (CPU-PCB) is indicated here. The SW2 or SW3 switch is set to ON when the corresponding number is red. When you turn the steering wheel to the right, the number increments. When turning it to the left, the number decrements. When you step on the accelerator pedal, the number increments. When you step on the brake pedal, the number increments. An approximate value of “0000” appears on the item c, d or e respectively when you locate the steering wheel in the middle and when the accelerator and brake pedals are released. (Even if the least digit of the number changes, the game is operating normally). “OK” appears to the right of the number when the accelerator and brake pedals are depressed. "ON" appears when you depress the clutch pedal. The position of the shift (1 to 6, N) and the status of four switches are indicated here. When you move the shift lever forwards, the switch | is set to ON. When you move it backwards, the switch 2 is set to ON. When you move it to the left direction, the switch 3 is set to “ON”. When you move it to the right direction, the switch 4 is set to ON. ”ON” appears when you press the service switch inside the coin door. "ON" appears when you operate the coin 1 switch. Not used.

To return to the Menu Screen, step on both the brake pedal

Page 14

6-3-4 Sound Test (Adjusting the Sound Volume)

Select “SOUND TEST” on the menu screen to adjust the sound volume. The following screen appears.

SOUND TEST

VOLUME(L) 3F — 4 (a) Sound volume for left speakers

VOLUME(R) = 3F = —— (b) Sound volume for right speakers

STEREO CHECK —

  • Stereo checking function

SONG 00.

EXIT=STEP ON THE BRAKE

Use the steering wheel to select the item to be changed. Step on the accelerator and the item selected will stop flashing. Use the steering to adjust the level. Step on the accelerator when the desired setting is reached and the item will start flashing. The steering can now select another item.

The sound volume can be adjusted in 64 steps between 00 (minimum) to 3F (maximum). The factory setting is “3F’”. (i.e. Loudest)

When you select (c) and step on the accelerator pedal, sound is produced the left speaker, then the right speaker. Step on the brake pedal to return to the Menu Screen.

The volume controls on the service bracket enable the seat volume to be reduced from the main volume.

Page 15

6-4 Adjusting the Game After Replacing Parts (Initializing the Game)

Be sure to adjust the game with the following the instructions below after replacing any part. Otherwise, the game will not function correctly.

1. Ensure that the accelerator and brake pedals are released and the steering is in the centre.

Hold down the service switch and slide to the test switch to “ON”. The following screen appears on the monitor display.

ADJUST

STEERING 0000

GAS 0000

BRAKE 0000

To zero the settings press the service switch.

When each number on the right hand side of the items: STEERING, GAS and BRAKE is about “OOOO”, the adjustments are complete.

Set the test switch to “OFF” to return to the Game Screen.

The test switch must always be “OFF” during normal game mode.

Page 16
  • HOW TO PLAY

This is the car race game.

Players can enjoy virtual driving with a clutch and shift lever (Automatic setting is also selectable).

Four difficulties are provided: NOVICE, INTERMEDIATE, ADVANCED and TT (Time Trial) and two types of operations can be selected use of clutch and shift lever or automatic.

(Outline of a Game)

When a player drives a car the specified number laps within the given time, he or she finishes the race, the ranking, lap time and total time are displayed and the game is over.

If the remaining time becomes “O” before a player finishes the race, the game is over.

(Starting a Game)

Insert coins, then select the difficulty. Turn the steering wheel to select the difficulty from NOVICE, INTERMEDIATE, ADVANCED and TT, then step on the accelerator pedal to set it.

Select the operation type: clutch and shift lever or automatic in the same manner as above.

If a player does not select the above items within 10 seconds, the game sets its choices by itself.

(Difference of the Difficulty Levels)

When a player selects the NOVICE level, he or she drives a car on the MAIN COURSE at a low speed. This is the player’s car vs. computer driven cars race game.

When a player selects the INTERMEDIATE level, he or she drives a car on the MAIN COURSE at a high speed. This is the player’s car vs. computer-driven cars race game.

When a player selects the ADVANCED level, he or she drives a car on the MAIN COURSE and a TECHNICAL BRANCH at a high speed. This is the player’s car vs. computer-driven cars race game.

When a player selects the TT level, he or she drives a car on the MAIN COURSE and the TECHNICAL BRANCH at a higher speed than that of the ADVANCED level. This is the player’s car vs. a computer-driven car time trial race. When a player clocks a good time, they can record their name.

Page 17

8 DAILY MAINTENANCE

8-1 Removing the Game Printed Circuit Board (PCB)

1. Remove the back door,

Remove two assembling bolts (M6 X 30), then pull out the power control panel about 25cm. (Note: if you pull it out too much, it will be detached).

Disconnect two connectors on the EMI board, then remove six cup screws (M4 X

  • from the shield case door. (Do not lose internal washers).

Take care not to damage the connectors between the EMI board and the main PCB to remove the shield case door, then take out the main pcb.

Remove two cup screws (M4 X 10) from the I/O door. (Note: Do not remove other screws).

Remove the I/O door, then disconnect four connectors of the I/O PCB.

Take out the I/O PCB. Shield case Back cover (L)

Cup screw (M4 x 10)

Angle bracket a en | a H Assembling bolt (M6 x 30)

ND ee ‘Power control ~. panel

Shield case door

Cup screw (M4 x 10) Main PCB AC fan

re EMI board aD

Ground terminal__-~]

Cup screw (M4 x 10) /

Page 18

8-2 Removing the Shield Case

2.

3. Perform Steps (1) and (2) described in Section 8-1.

Disconnect the connector of the AC Fan.

Remove two cup screw (M5 X 14) then take out the shield case.

8-3 Removing the Power Control Panel

2. Perform steps 1, 2,5 and 6 described in Section 8-1.

Disconnect two connectors of the EMI board, remove a cup screw (M4 X 10) from the shield case door, then remove the ground terminal. (Note: do not lose the internal washer).

Disconnect the connectors connecting the power control panel and the main body assy: one connector on the right side and two connectors on the left side then remove the power control panel.

8-4 Signboard Assy

8-4-1 Replacing the Fluorescent Lamp

  • Remove five torque bolts (M5 X 12) from the signboard cover.
  • Disconnect two connectors of the flashlight, then remove the signboard cover.
  • Pull out the fluorescent lamp cover, then disconnect the ground terminal and the connector connected to the main body assy. (Note: do not lose the internal washer).
  • Pull out the fluorescent lamp fixing plate, then replace the fluorescent lamp (32W) with anew one.
Page 19

8-5 Dashboard Assy (Replacing the Fluorescent Lamp)

1.

Fluorescent lamp

Connectors Remove five torque bolts (M5 x 12) located on the right side of the dashboard, then the dashboard cover (R).

Remove one cup screw (M5 X 12) and disconnect one connector. Then pull out the FL bracket. To perform this operation, keep the right side of the main body 320cm distance from another machine.

Replace the fluorescent lamp (15W) with a new one.

Cup screw (M5 x 12) FL bracket

Dashboard cover (R)

Torque bolts (M5 x 12)

8-6 AB Pedal Assy (Replacing the Control)

1. Remove four hex head bolts (M6x20) and withdraw the assy forward .

Loosen the quadrant gear clamp screw and remove the quadrant gear.

Loosen the gear grub screw and remove the gear.

Replace the control potentiometer.

Note: When re-assembling a. Ensure that the potentiometer locating tag is engaged in the mounting plate cutout. b. Turn the potentiometer shaft almost fully clockwise before engaging the quadrant gear.
Page 20

8-7 Clutch Pedal Assy (Replacing the Micro Switch)

  • Remove four hex head bolts (M6x20) and withdraw the assy forwards.
  • Replace the micro switch.

8-8 Steering Assy

8-8-1 Replacing the control

  • Remove four button head screws (M5x12), two on the steering column and two on the underside front. Loosen three button head screws (M5x12), from the underside rear, and remove the under cover vac-form.
  • Disconnect the four way connector.
  • Remove four hex head bolts (M10x20), two either side of the steering box assy.
  • Remove two hex head bolts (M10x20) under the steering column.
Warning: The steering assy is heavy and will drop when the two hex head bolts are removed, be ready to lower the assy.
  • Loosen the grub screw on the gear and remove the gear.
  • Replace the control potentiometer.
Note: When replacing the control potentiometer ensure that the locating tag of the potentiomer is located in the hole in the mounting bracket and the pot shaft is at its mid travel before tightening the gear grub screw.
  • Re-initialize the game (See 6-4 Adjusting the Game - page 15) before the game is played.

8-8-2 Replacing The Steering Wheel

  • Remove the centre cover of the steering wheel.
  • Remove three socket button heads (M6x16)
  • Pull of the steering wheel, then replace it with a new one.
Page 21

8-9 Gear Shift Assy (removing)

  • Remove six button head screws (M6x16) and remove the boot cover plate.
  • Remove twelve button head screws (M6x16) and remove the shifter cover plate.
  • Disconnect the six way connector.
  • Remove four hex head bolts (M6x20) retaining the shifter base plate to the housing assy and remove the assy.

8-10 Replacing the Speaker

  • Remove eight torque bolts (M5 X 12) located on the side of the main body, then the monitor panel (R) or monitor panel (L).
  • Ensure the correct colour wire is re-connected to each speaker terminal when replacing speaker.
Page 22

8-11 Replacing the Monitor

The monitor weighs approximately 60 kgs and it is recommended THAT AT LEAST TWO PEOPLE remove the monitor.

  • Remove 14 torque bolts (M6 X 16), then the rear cover.
  • Disconnect two connectors.
  • Remove two hexagonal bolts (M6 X 20), then take out the monitor from the main assy as indicated by the arrow mark.
  • Replace the monitor with a new one.
  • To replace the rear cover, hook the stud bolt of the rear cover to the hole of the main body assy, then fix the rear cover to the main body assy with fourteen torque bolts (M6 X 16).

_Monitor Assy

_Main body Assy

Hexagonal bolt (M8 x 30)

Rear cover (U) _- Torque bott (MB x 12) _

Page 23
  • PARTS LIST

CABINET

DESCRIPTION PART No

Monitor 33" Hantarex Polo 84000015

Speaker 4 1/2" 20w (with shield can) 62000006

Speaker - Piezo Hom 62000046

Accelerator/Brake Pedal Assy 88800021

Accelerator/Brake Control Pot (5k) 76000652

Clutch Pedal Assy 88800032

Steering Assy (340 degrees) 88800045

Steering Control Pot (5k) 76000652

Power Supply Assy - 5v/30amp 83000004

Schaffner Mains Filter Input Assy 66000016

Fan 67000015

Fluorescent Tube 18" 64500000

Choke 15w 63300000

100 Ohm 10w W/W Volume Control 76000164

M16 Adjustable Foot 88300079

75mm Castor 59000005

SEAT & BASE ASSY

DESCRIPTION PART No

Seat - (black) 88300673

Seat Slider Mechanism 88300680

Speaker 4 1/2" 20w 62000006

Speaker Cover Plate (Left) 88300603

Speaker Cover Plate (Right) 88300604

6 Speed Gear Shift Assy 88300672

Gear Shift Leather Boot 88300683

Bull Bar (Polished S/Steel) 88300678

M16 Adjustable Foot 88300079

75mm Castor 59000005

Page 24

VAC-FORM PLASTICS

DESCRIPTION PART No

Side Speaker Cover (Left) 88300716

Side Speaker Cover (Right) 88300717

Screen Surround 88300720

Dashboard 88300722 Dashboard Under Cover 88300723

Dashboard Side Closing Cover (Left) 88300724

Dashboard Side Closing Cover (Right) 88300725

Steering Closing Cover 88300726

Header End Closing Cover (Left) 88300729

Header End Closing Cover (Right) 88300730

DECALS

DESCRIPTION PART No

Side Speaker Cover-Ridge Racer (Left) 40000187

Side Speaker Cover-Ridge Racer (Right) 40000193

Gear Shift Upper (A) 40000188

Gear Shift Lower (B) 40000189

Seat Back-Ridge Racer/Twin Turbo 40000190

Namco 40000191

Twin Turbo 40000192

ACRYLICS

DESCRIPTION PART No

Screen Top Hood (Smoked) 88300705

Speedo Front Cover 88300727

Battery/Oil Front Cover 88300728

Speedo Printed Polycarbonate 33000115

Battery/Oil Printed Polycarbonate 33000116

Ridge Racer Top Flash 30000058