Steel Talons TM-370 1st Printing
Steel Talons (rev 2) (Atari Games, 1991) · Technical Manual · 54 pages · 98 sections · original scan
‘emus
Operator’s Manual
Operator’s Manual
with Parts Illustrations
tnt py on sep le Se ers game
Copyright © 1988, 1989, 1990, 1991 by Atari Games Corporation. All rights reserved.
he game play all graphie designs this technical manu al, its accompanying schematic diagrams, and the dis play manual are protected by the US. Copyright Act of 1976, “This Act provides for substantial penalties for violating federal copyright laws, Courts can impound infringing anicles while legal action is pending. Ifinfingers are
‘convicted, courts can order destruction of the infringing, certain cases. Infringers may also have to pay costs and yeats a8 well as fines of up to $250,000 in the case oF in
articles.
Tn addition, the Act provides for payment of statutory damages of up to $50,000 per infringing transaction in certain cases. Infringers may also have to pay costs and. attorneys foes and face an imprisonment of up to five yeats a8 well as fines of up to $250,000 in the case oF indlividvals and up to $500,000 in the case of corpors
Atari Games Corporation will aggressively enforce its copyrights against infringers. We will use all legal means to immediately halt any manufacture, distribu:
tion, or operation of a copy of video games made by us ‘Mari Games Comoration
Anyone sho purchases such copies 1sks forfeiting such
Published by
675 Syeamore Dave PO. Hox 361110 Milpitas, California 95036 Printed inthe USA. 8/91 Produced by the Atasi Games Technical Publications Department
‘Writing & Eating: Andrea Dencker
Tlustation & Design: Mary
‘Ohanesskin Sumner Nott E RE.
NON-ATARI
‘You may void the game warranty (printed on the inside back cover ofthis manual) it you do any ofthe following ‘Substitute nom-Ataripars i the game ‘Modify or ater any circuits the garve by using kis or parts nor supplied by Atari Games Corporation,
This equipment generates, uses and can radiate radio Ie ‘quency energy, and if ot installed and used in accordance ‘vith the instrucion manual, may cause interference 101
clio communications. Ie has been tested and found to com:
ply with the limits Fora Class A computing device pursuant {0 Subpart | of Part 15 of Federal Communications Com mission (FCC) Rules, which are designed to provide rea sonable proxection against such interference when operat ced in a commercial envionment. Operation of this equipment in a residential area or modification 1 this ‘equipment is likely to cause interference, in which case the user, at his own expense, will be required to take
whatever measures may be required to cortect the interfer
tence, IF you suspect interference from an Alan game at ‘your locaton, check the following ‘+ All ground wires in the game are propedly connected fs shown inthe game wiring dlageam + he power cond propery plugged no a rounded ‘+ On games provided with an Electromagnetic Intefer tence (EMI ground plane, be sure that the game print tedcicuit boards (PCBs) are properly installed on the EMI ground plane an! thatthe end board is securely installed with al screws in place and tightened. IF you are sill unable to solve the interference problem, please contact Customer Service at Atari Games Corpor tion. See the inside font cover ofthis manual for service
1 Set-Up How o Use This Mani Operating the Game
Seting Up the Sofware
Seating the Coin and Game Options
2 Self-Test
‘Testing the Game Entering and Exiting the SelfTest Automated SelfTest Program ROM and RAM Test Microprocessor and Board Tests ‘Test Menu Screens Operator Screens, Coin Options: Game Options Reset Pot Values Histogram 1, Whole Game Times in Minutes. Histogram 2: Tine/Greditin Seconds. Histogram 3: Number of Times Level Started FHiscograns & Number of Times Level Quit Histograms 5: Number of Times Bonus Awarded aUThis Level Histogram 6: Percentage of Tine Played in Real Flight, fe Error Conots High Scores ‘Control Inputs Screen, Monitor Test Patterns 210 Set Time Seren 210 ‘Special Functions Seren zu
3 Maintenance and
Troubleshooting Introduction e Maintaining the Coin Mechanism ce Repairing the Video Display 3 Removing the Video Display 33 Replacing the Video Display 3 Joystick Control 3 Foot Pedal Assembly 4 Collective Control MM HOMs and RAMS 34 LEDs on the Multisyne PCB 36
4 Illustrated Parts Lists Part Ordering Information "1 For figure and page numbers, see the List of Illustrations that follows.
Statistics Sheet [fer the end of Chapter 4
Glossary
I
Figure 11
Figure Figure 2-2 Figure 23 Figure 24 Figure Figure 2.6 Figure 2-7 Figure 2-8, Figure 29 Figure 2-10 Figure 2-11 Figure 212
Figure 31
Figure 41 Figure 4-2 Figure 43 Figure 4-4 Figure 4-5 Figure 46 Figure 4-7 Figure 4-8 Figure 49 Figure 4-10, Figure 4-11
Figure 412 TRATION
Game Assembly
Program ROM and RAM Test Screen Microprocessor and Board Tests Seren. Test Menu Screen Goin Options Screen Game Options Sereen Reset Pot Values Screen
First Histogram Screen Error Counts Screen ‘Control Inputs Seren Set Time Screen. Special Functions Screen
DIP Switch and LED Locations on
the Mulisyne PCB
Cabinet-Mounted Assemblies Rudder Pedals Assembly Collective Control Assembly Pot Joystick Assembly Right Power Supply Assembly Left Power Supply Assembly Four-Entry Coin Door Assembly Mulkisync PCB Assembly DS III PCB Assembly DSPCOM PCB Assembly +10
#21 Steel Talons Rump Thump PCB Assembly
SAIS (Audio) PCB Assembly Tabi
Table
Table Table
Table
table Table
Table Table
Table La TABL
Simulator Specifications
Using the Self-Test Sereens and
Diagnostics 2
Goin Option Seung 25 All Screens Appearing in the Self-Test 26 Game Option Settings 28
Troubleshooting Table 52 Voltage Inputs and Test Points on the PCBs 33.
‘What ROM Problems Look Like $4
Atari Games Vieleo Connector (J10) Pin Assignments +4 LED Status, 56
CHAPTER 1
Set-Up
This manual is written for op:
erators and service personnel It provides information for setting up, f and maintaining your Stee! ing, testing,
Talons™ game, Steel Talons is
a one- or two-player helicopter flying game that uses two sets of controls and monitors to provide a very realistic sensation of the landscape ahead and below the player. $ Chapter 1 contains ation, § Chapter 2 contains self-test procedures and additional setup and game play inforn
diagnostic tests. The self-test is important in the Steel Talons game. You can troubleshoot
the PC boards, main circuits, and controls us: ing more than 60 screens in the selftest. You should regularly test the boards and controls with the self-test to keep your game in peak condition and at top earnings. J chapter 3 contains the preventive maintenance schedule for the game and the repair procedures, flowcharts, and troubleshooting tables for each control. 1 you have problems with your game, use this chapter to troubleshoot and © repair it. Be sure to perform the preventive maintenance tasks to keep your game in good condition.
Chapter 4 contains the illustrated parts lists
Operating the Game
‘your players know that the game is designed to be own like real helicopter. You should regularly do the automated self-test and check the controls with the Gontrol Inputs seen ia the sel-test, By using the sel test regularly, you ean find andl fix problems immediate
Inspecting the Game
This cabinet should be connected to a grounded three-
wire outlet only: IF you have only wo-wire outlets, we
recommend that you hiee a licensed electrician to install
grounded outlets. Players can receive an electrical shock ifthe cabinet is not properly grounded. Inspect your Steel Talons game carefully to ensure that the game is complete and was delivered t0 you in good condition, Inspect the cabinet and seat as follows
- Examine the exterior ofthe eabinet for dents, chips, or broken pans, 2, Open the upper and lower rear access panels, Un=
Jock and open the coin doors. Inspect the interior of
the cabinet as follows:
&. Check chat all plug-in connectors on the cabinet harnesses are firmly plugged in. Do not force connectors together. The connectors are keyed $0 they fit only in the proper orientation. Are
versed connector ean damage a printed-circuit
board (PCB). This will void your warranty
b. Ensure that all plug-in integrated circuits on each PCB are firmly phigged into thei sockets 6 Inspect the power cord for any cus oF dents in the insulation 4d. Inspect the power supply. Make sure that the comtect fuses are installed. Check that the barness is plugged in correctly and that the Fuse Line Fuse Rating Tare tine Voltage ee eae ~ Temperature Foe cere Humidity SSC oes Kae ian so ches (15 Te) Depth Biren 47S3em) Height Taine (15am) ‘Shipping Weight “stabs (2G) = ‘Assembled Weight (approx) 50 os (0249)
‘Table 1-1 Simulator Specifications
block cover is mounted in place. Check that the green ground wites are connected Inspect other sub-assemblies, such as the video display, controls, printed-circuit boards (PCBs), and speakers. Make sure that they are mounted securely and that the ground wires are connected.
Assembling the Game The game, seat platform, and attrition assembly are shipped in three separate boxes. You will ned! a helper to assemble the game, Reler to Figure 1-1 duing this procedure, The assembly hardware described below is packaged inside the coin box. Most of the steps below are illus trated with circled numbers in Figure 1
- Push the seat platform close to the game, so that they are about 6 inches apar, Plug the three game cords and the hkamess into the corresponding seat platform sockets (the sockets and cords are la beled). Push the excess of the cords into the game cavity, to avoid interference when both structures are joined together, Make sure the game is in place. itis nearly inrpossible fo move the game or readjust the seat platform levelers once the canopy is attached. Adjust the seat platform levelers so the platform is exactly at the same level as the game cabinet. (Turning the levelers clockwise raises the seat platform.)
- Unbolt the 1/4-20 hex bolis located at the top of cach column. Also remove the lock washer and fender washer
- With a helper, push the cabinet against the seat plat fom, Make sure all the cords remain properly con nected,
Figure 1-1 Game Assembly,
- Remove the attriction shield from the canopy, Position the canopy on top of the columns, Peed the fiuforescent hamess from the right column up through the round! hole into the atraction hox.
- Align one colume’s bolt hole with the matching sletted hole on the attrction assembly The bole should be located at the center of the attraction assembly slot. Tighten the bolt, and repeat for the other col ‘umn. The bolts should be at the center of the slot 0 censure clearance for the lower attraction retainer. Push the entire canopy unit towards the game abi ‘net to align the four bolt holes that secure the cano- Dy and the cabinet. Use 1/4-20 x 2" buttonshead hex socket bolts, cap-nuts, and washers, To secure the seat plform to the game cabinet, install the black cabinev/platform brackets; se 1/4-20 X 2" button-head hex socket bolts and washers
- Install the player divider panel by inserting it into
the ceiling slos, Use a rubber mallet to ft the “U" re
tainer onto the bottom edge of the cabinet divider panel, Use 1/4420 car: Flage bolts, washers, and cap-nuts to se ‘cure the panel ee)
Setting Up the Software
Normally the game arsives fully calibrated and ready to, play. However, if you think any of the controls are not ‘operating, property, you should check them in the self test procedure One example of a non-calibrated contsol is a cyclic
inlcator in the lower le corner of the screen (a yellow that cannot reach its Tits: the joystick and rudder con:
+ sign) that does not center itself when you release the joystick handle. Another example is any pot control
trols have a box in the lower let comer of the sereen to,
test this function during game play: Refer to Chapter 2
SelPTest, for more details
Control and Switch Locations
Power On/Off Switch ‘The power on/off switch is located at the bottom right rear of the cabinet (the fff when facing the rear of the cabinet)
Self-Test Switches
The sell-test switches (one for each player station) are located behind the coin door on a metal component bracket. Pushing each switch up stars the self-test pro-
Set-Up
cedure. See Chapter 2 for a complete description of the self-test,
The SAIS (audio) boards also each have a self-test
switch. For proper operation of the main self-test switches on the component bracket, make sure the audio board self-test switches are always pushed towards the nearest mounting screw.
Volume Controls
The volume controls (one for each player station) are digital, but are adjusted with the shafts on the component bracket behind the coin door. Refer to Chapter 2 for information on how to calibrate these potentiometers.
Coin Counters The coin counters (one for each player station) are located behind the coin door. The coin counters record the number of coins deposited for the corresponding side of the game.
Setting the Coin and Game Options
The Steel Talons coin and game options are set in the self-test. Refer to Chapter 2 for the recommended settings and the procedure for setting the options.
Game Systems
The Steel Talons game uses nine printed-circuit boards to give a realistic look and feel to helicopter flying These boards and their functions are:
- Two Multisync boards — the main game circuitry. These boards, which are the largest, hold the 68010, the GSP (Graphic Systems Processor), the MSP (Math Systems Processor), and the microprocessor systems. The 68010 system contains program RAM and ROM. The GSP microprocessor tem controls the video RAMs (VRAMs). The MSP controls collisions and the helicopter model.
- Two DS III boards — these produce the polygon objects on the screen
- Two DSPCOM (Digital Signal Processor and Communication) boards — these link the two player stations together
- Two SAIIS (Stand-alone Audio II Stereo) boards — these provide the audio for each player station. One channel on each board powers the rear speaker in the column, and produces the helicopter sounds. The other channel powers the
1-4 Steel Talons
speaker on the control panel and produces all the sound effects, such as missiles firing,
- One Rump Thump/15V Regulator board — this board powers both Rump Thump solenoids (one under each seat). It also provides 15V regulated power to the pots (via the Multisyne board).
Maximizing Earnings
For maximum earnings, regularly maintain your Steel Talons game following the instructions in Table 3-1, in Chapter 3. When you set up the game and when you collect money, perform the automated self-test and check the controls with the Control Inputs screen in the sel
Game Play
This section describes the features and play of the Steel Talons game,
Introduction Steel Talons represents the ultimate in current game technology, offering a realistic helicopter simulation experience to the player. Two players sit side-by-side to play cooperatively on a common mission to seek out and destroy the enemy, or to play a head-to-head game of cat and mouse. Although the cabinet is configured to enhance the appeal of two-player simultaneous play, players can opt to fly solo on the missions and challenge the computer-controlled enemy aircraft and ground targets.
Details of Game Play The Steel Talons controls include a cyclic at each player station. This joystick-like device controls movement forward, backward, left and right. Each cyclic has a tigger button to fire the 30 mm machine gun and a thumb button to fire missiles or rockets. Each player station also has a rudder (a rocking bar at the player's feet), which is used for stationary rotation. A collective (handle at the left side of the player's seat) controls the altitude of the helicopter. Also included on each control panel is a “zoom” button. This button allows the players to select whether or not they want to zoom out of their helicopter to view it from a third-person perspective. For some players it is easiest to maneuver the helicopter when it can been seen relative to other objects on the battlefield. As an alternative, players will score double points if they select a first-
person view out the front windscreen of the heli copier: ‘The control pane! also has an optional button for “Real Heli Fight" When pressed, a more realistic helicopter ‘model is enabled and the buton remains hit. In Real Helicopter Fight mode, the player controls al movements of a reals tic computer model of
‘wols of a modified Blackhawk Model $-67 helicopter. This option is included on Steel
“Talons to challenge real pilots and skilled players,
Real Helicopter Fight is offered as an experience for skied players, and as such, it must be specifi lected, If the player crashes during Real H. Flight, the game wil default back to the standard compputerasssted fight mode. Players can thea switch on Real Helicopter Flight if they desite. ‘The standard Might mode using computer assist makes controlling helicapter a breeze even for rookie Tots. The standard flight mode assists players by linut ing the speed and altitude 20 they do not get lost in laying to find the other player and targets to ire upon ‘The standard flight mode also makes i easier for the players to land their helicopter without crashing. In Addition, unrealistically quick acceleration and deceleration is allowed to make the game more fun to play Using the mission-select screen, players can choose the type of game they would like to play. For beginring player, there is a taining mission that can be used to learn how to ly the Stcel Talons simulator. In the taining mission, che players follow a light instruc tor through an obstacle Course, repeating each of the moves made by the helicopter infront of them, During the combat missions, players can fly solo or play cooperatively to seek out and destroy enemy tar gets. As the game progresses, the missions become fore and more difficult with more and smarter enery aircraft and ground targets. Steel Talons also bas a head-to-head mission, a fa vorite for competitive players. The head-to-head mis- Sion isa strategic game of hide and seek between the to player pilots: the objective is 10 shoot down the Other player. The unique design of the Stel Talons Cabinet makes it impossible for one player t see the Sercen ofthe oer player to determine his locaton, Steel Talons also features Atan’s exclusive “rump thump”. When a player gets shot by enemy fie or by the second player, there is an audible and tactile “hump” In is sea rom a solenoid Players are awarded fuel for competing @ mission, In ‘dion, players earn ace, pass, ot fal etings depending upon the time used to. complete the mission. At the end of each mission, the players time is compared to « minimum lime needed to pas. Fors pas ung, ade tional fuel is given depending upon bow ‘uickly the player completed the level. If his time beats the best ime, the player wil be given an ce rating and awarded bonus potas “The game is imed by the fuel consumed. The player's
fucl level decreases Overtime and when he i hit by
enemy fire. The helicopter can be refueled by deposting more coins to continbe the game Game Play Hints Head-to-Head Missions + Sty low to avoid showing up on the other player's map. + Use the terain to sneak up on the other player oF to scta tap. + In addition to avoiding the other player, each paycr may have antaitenit bateries or other jects fear ther stating base. These targer will shoot at the other playet You can also shoot and’ desroy the other player’ targets There may be radar oF fther targets in the word which can be destoyed by ether player. These targets play a role in determining whether of not you show up on the other player's map.
Combat Missions
‘+ Ina wo-player cooperative game, bonus points are awarded to the player with the most kills. 1000 points are awarded for each kill more than the othor player. + Stay low to avoid jets. + Destroy jets on the eunways before they take of. + Use the map to locate your pasition and the posi- Won of targets + Use the radar to locate targets near you.
1s
CHAPTER
Self-Test
‘The Steel Talons” gam¢
To keep it at peak efficiency and
‘imum earnings, you should
regularly check the controls
RAMs, ROMs, PCBs, and micro-
processor systems, You can check
all of these when you switch on is a complex machine, TESTING THE GAME
the self-test. Also in the self-test you can cheek
the video display, the statistics,
and set the internal clock, If you
are having electronic problems,
you can check the state of various
signals with the LEDs on the Mul
tisyne PCB.
You should regularly check the following screens and information, We recommend you check these when you firs set up the game, each time you collect money, Sr when the game is not working correctly
- Use the automated self-test, which begins automat
cally when you turn on the selFest to test the po sound board. The test takes about 5 minutes to nun,
fgram RAMs ind ROMS, the video RAMs, color RAMS, the DS TIL hoard, the BSPCOM board, and the SAIS
+ Check the Control Inputs sereen, which you choose from the Test Menu screen. This shows the voltage input to the Multisyne PCB. The Control Inputs screen lets you easily check the rump thump sole roid and the Real Heli light light. Tt can also be + Check the statistics and histograms sercens that show the statistical information about how and when your game is played, Table 2-1 shows you what tests and screens £0 use at different times and for different problems,
Entering and Exiting the Self-Test
You enter and exit the automated self-test procedure by turning the sell-test switches on or off, The switches are located inside the coin door (a separate switch for each, used if switch is stuck on oF not working, player station). The self-test consists of + A five-minute automated self-test of the ROM, RAM, the microprocessor, and the PC hoards, + Check the Reset Pot Values sereen to check the range of values for the joystick, foot pedal, collec: tive, and volume control A Test menu from which you can run specific tests in case you receive error messages
Explanation \When you ih on he sels. he auto st tet spacer. Tis tts the prog RAM and ROM and ne OB, Yu cans to at et by reseng and nadine aon ten as san 88 yo nthe sae Appear aie he uote seat Sect star domaton cnt sooen ity co Be atoning P Goto aurate stot (hack ne Operator Seren Game Set-Up When you fest vp you ame, do to tlowng 1 Dothwaonaies sorte
- Mao sre cpt on he Operator Seow ae st coety for ouracaon, of ae fe dss. paris, You sted obec he octangeton he Rese Pa Vise sean
- Goiote Cone! nuts scree tenth 4 Sari cck econ ug to Sel Control Problem 1. Doth Rest Po Ves sren (S88 he Operator Scene anu War) ecalbiie he coro 2 Ina does nt creat he prtiem, goo fe Conte! puts tee an seal nal hom th corel changes as 8 Gote Chapter 3 and chock the woublestocting abl and msrtonance nfrmation for tat conte, Video Display Problem Fin tough ne Mono ex Pte tee, a compare wih th scone nie chanla Electronics Problome |. Doihe avoraied elie
- Choose SpacdlFunsins sree ta apple you rls he GSP Staph Sys Pocese), program FROM, D5 bow, OSPCOM boars, o sound Bord ot no set the ral gu clock
Table 2-1. Using the Self-Test Screens and Diagnostics
Automated Self-Test
When you enter the self-test, the game automatically tests the program ROM and RAM, the video RAM, the color RAM, the MSP (Math Systems Processor! RAM, the
DS TIT PCB, the DSPCOM PCB, and the SAIIS (sound)
pce,
The automated testing takes about five minutes, The results appear on the screen. Messages in red alert you to 1 problem. You can run further testing from the Test
If you do not want 10 wait for the systems andl PCBs t0
be tested, you can skip these tests by pressing the 200m will run its course.) If You want to exit to the attract
burton while in the program ROM and RAM sereen, Fig ure 2+. (UF the seltest proceeds beyond this screen, it
mode, just umn the selFiest switch off
Program ROM and RAM Test When you enter self-test, the game tests the program ROM and RAM. The screen in Figure 2-1 shows the re sults of a program ROM and RAM test
The Cop of the screen shows the ROM test result. The numbers on the left and the leters on the top of the
'BAD PROGRAM ROM IS BLANK BOX YxwvurTse ou nme mee 20mm n mee ROMS AT 200R AND 210 CONTAIN THE SELF-TEST PROGRAM
PROGRAM RAM OK
PRESS ZOOM TO BYPASS SELF-TEST
Figure 2-1 Program ROM and RAM Test Screen,
screen show the locations of the ROMS on the Multisyne
PCR. If a white box appears, then the ROM there ts
good. IF an empty box appears (as shown at 2000) and then nothing was tested there
2100), then the ROM there is bad. If nothing appear,
Tis sereen disappears afier a few seconds and the self test continues. However, the sereen with the results of the complete self-test, shown in Figure 2-2, shows the message Bad Program KOM (or Bad Program RAM) if it found an error in the program ROMS of RAMS, Microprocessor and Board Tests After checking the program RAM and ROM, the automated self-test checks the game's microprocessor and PC boards, Ir tests the video RAM and color RAM in the GSP (Graphic Systems Processor) microprocessor system, the MSP RAM, the DS III hoard, the DSPCOM board, and the sound board, The test takes four to five minutes. You see the screen in Figure 2-2 when the test is completed, If the system or board is good, OK follows the t name. IFit is bad, the word Baal precedes the name of the board or system (except for the DS Ill hoard test, which gives more information). If you have a bad sys: tem or board, then choose Special Fuoctions from the Test menu, choose the appropriate system or board tests from the Special Functions menu, and read the description ofthe tests in this chapter Here isa brief description of each microprocessor and board test performed during the automated sell-test. PROGRAM ROM: Described above PROGRAM RAM: Described above, GSP VRAM: Uses the Simple GSP VRAM Test. (De:
‘PROGRAM ROM OK
vaLsions paw Dépcom Boano ox 2105 asioss
[PRESS 200M To SELECT TEST MENU
igure 2-2 Microprocessor and Board Tests Screen
scribed in the section Multisymc Board GSP Tests)
GSP COLOR RAM: Uses the GSP Color RAM Test. (De:
scribed in the section Multsync Boared GSP Tests)
MSP DRAM: Tests the RAM for the MSP. Most of the ex ror messages are self-explanatory ‘SAIL Test: Tests the SAIIS sound board program ROM, RAM, and the sound board communications (SCOM).
Test Menu Screens
After the microprocessor and board test is finished, a screen of instructions appears on how to use the test menu. Afler you press the zoom button, the Test menu appears (see Figure 2-3). "The Test menu screens le you conduct specific troubleshooting in case of problems, Table 2-3 shows all the tests that are available from the Test mens
Pressing the trigger of thumb button moves you up or down the menu. When the option you want is white, press the zoom button to select it. The submenus for the specific tests work the same way
Operator Screens
Choose Operator Screens from the menu by pressing the trigger or thumb hutton until this item is white, then ‘press the 200m button to select it
IF you are in the operator screens and want 10 go 0 the “The sequentially-appearing Operator Screens let you set
attract mode, frst press the zoom button to go through the remaining operator screens, When you retuen to the Test menu, tur off the sel-test switch,
game options and monitor the use of the game. These screens are listed below and are described in the following sections
Figure 2-3. Test Menu Screen = Coin Options + Game Options + Reset Pot Values
+ Histogram 1: Whole Game Times in Minutes + Histogram 3: Number of Times Level Stared
‘Histogram 2: Time Per Credit in Seconds
Histogram 4; Number of Times Level Quit at + Histogram 5: Number of Times Bonus Awarded at This Level + Histogram 6: Percentage of Time Played in Real light + Error Counts + High Scores
Coin Options
Te default setting for each option is green,
Game Options
Figure 2-4 Coin Options Screen
Option
Pray Discount to Continue Yee ——~—SNow
Game Cost
Bonus for Quantity Buyin Nova v 2ecis gue 1 (eta co Secine ge 1 Sons gies Right Mech Value
Loft Mech Valve
o Maretacuars Table 2-2 Coin Option Settings
Figure 2-5 Game Options Screen Reset Pot Values This screen is shown in Figure 2.6. Use this sereen to calibrate the potentiometers in the cyclic (joystick), cob lective, rudder foot pedal, and volume control. Move the joystick in both the X and Y directions and press both sides of the rueder, let the controls snap back to their rest positions. The green triangles should point t0 somewhere in the center green area. Ifthey do nos, You should calibrate the controls as follows.
Figure 2-6 Reset Pot Values Screen
‘Automated SottTost Program Ra an ROM ‘erat See! ests
‘Test Menu Screens sete tr Test Men ‘eat lew
Gare Options se ot alae
Hisogeans 6 nee Coune High Sores
Contr! impute Monitor Tet Patterns ‘Cobre ont tut MonirBrigtness ey Seale wea Tests ho program RAM ana ROM ‘She este he program Ral and ROM, VRAM, cor RAKE. SP ORAM, CS PCB en sca Posten
emsion soot using te test ma, Listotavaiale en animation you can chase
sette con opons Sethe gare opions an catalsthe hgh see table he atoct rade, Caters ne gare portato. ‘Shoe gaa sates ‘Sons game istograr seers Shoe @ complet ofthe err cous, any, fom tha toate sod oy te fc or age Sons het 10 nes an oes achieve.
cr
User ‘Sone he veo dla cls Used ne mentor tp Shows the oigipsssctusinent ‘Shane ne gry scale oe vido spay ‘Sone convergence and oo he video py, ‘hone convergence and foo oho vise dep oma sv the ena and suches are aperaing conecy rea cack he pearance of your vdeo diay
FulScem Gry Ful Soen Wate FulSceen Re Full Son Gren Full Seen 2 Moni Hon Vatage Test
‘Sot Time
peal ines Sons inca fb vee asa. Shon ne exer purty othe vides sy Shows th coo puny a he video aay Shone the xr puriy oho video day Shows the cclor puny one video cay (Checks the etn ol he gh vatage othe vo spay ing Tet (Chak tne sealing machen oie GS? meropocesbor ‘ethene so tat he cay a he toro te Test Men coe eds comes
Table 2-3 All Screens Appearing in the Self-Test
Reset the pots by simukancously pressing the Real lle Flight and Zoom buttons: the lines will change to red, Then move each control to its limits and hold i there for a few seconds, The green hexadecimal number
should equal or be very elose to the blue number at the + Recalibrate the pots if the range is greater than the sides ofthe screen. If the center green area is red,
fend ofthe line,
pots will reach! Move the controls to their limits 10 see how far the triangles move to the left and right
then the pot does not have enough ringe. Replace the defective pot or control
+ Ifthe cyelic and rudder cannot return to the center green area, the controls are not cortect. For exam ple, in game play you may be flying slightly for wward/back or lefv right when the eyclic is mechan: lly centered Statistics ‘The statistics screen is shown in Figure 2-7. The statistics are collected from the last time the statistics screen was cleared. Write this information on the statistics sheet in the back of this manual to help you maximize your profit To move to the next seen, just press the zoom button. To clear the statistics, hold the Real Heli Flight button ‘and press the zoom button at the same time.
The statistics the game collects are explained below:
‘Left Goins shows the number of coins counted in the
left coin mechanism. + Right Coins shows the number of coins counted in. the right coin mechanism,
‘Special Functions Uso this sren fortes one conto, PCBs, anc miccprocestns Main Mutisyne) Board GSP Tests _Uss:is sre you nave aVRAM luo in he aon sees ‘RAM Serpe es, (Checks tba VRAMS ne GSP metepracessr yer, ‘Re vey Tet “eat aha VRBM GSP memory RAM Corps Test, Corp ets a RA Test YRAMForDipisy Eros Complete esa MRAM incon pay. Cale Rava Tess the cor Ra, VRAD St Reiter Test hoc teva strat Main (Muitisync) Board MSP Tests nba ole cs bolo, acc pleve seats onthe ewan when he ets dave Tha puree ‘sents the MSP creuty 09 Pe Nulige PoB.Ajoen rectangle mea te Ios OK tue meas ee was ates ara moans he bad SP very Testrnsin he MSP chips hemsoves ad ease MSP Is vor acute. MSP Completa Tet Tostcrun ty he 60010 ea Main Board ROM Checkeums Uzi sith pogran ADWS al Pe aoa test ~ ‘Main (Muttioyne) Board ZRAM Test Check ie Z38N or lar he ZR. Use hie al he ps carol be esl oH Salsice we nthaph eect 2AM Test Teas he Ze0 Powe ono) RAM Clare Zeatt Cars ho 20 Powe (na-roiaie) RAM of al data, BS 1 Board Teste 08 Graphics Progam ans Daa RA Tested by E2010, Use set ifthe 0S hoard fas he aves ates, 2101 Vea Signe cts ho 2101 IC § worng anc tion rogram 1S Graphics rogram and Data RAM Tesi by 2101 Tho 2101 ns sardia, compe test on oan program memory (Ra Tet Tess te DS ilsjsom can gonorate as. Gracies ROM Checksums 69010, Tsts:he graphics ROMs on he OS I POB Graphics Special Furcions Poa hare dag anc excllszope test oops rw yao etna ~ DSPCOM Board Tests ‘Uso oso ess fie DSPCOM boars athe automated eles. 2105 Test Test the 2106 ysis washing Goes oa sutmen. let various Kets of ho 105 ASICS Tots Goes a subensae he ASS ote DSP Lek Tots Compress DSP nk danrosi fr eerrictans Goo suomenu that ests he commncaton bk berween ban aye satire ‘Sound Board Tests Use hese ests te SAIS courant auanatd Sets ‘(Sound Bos Sate Tests te Seu sogtam RN. POM, and SCOM cis. Pay Sounde Choose en hoa seca gama sound Table 2-3 All Screens Appearing in the Self-Test, Continued
‘mes nies player has cred ints wn the pews 200 Option ame Ditculty Mesune’ Medium od Hard \eyard Mas Seat Thumper Tats yout to a
| Sounds la Attract | ow | or | Lats yu ange wheter orto play mus waa | |
| ‘Auto Reset High Scores | Orv | on | uma wane he gh eo | |
| High Score Name Censor | Easyc200¥ | ‘Sect | ‘Narra enred on the high Score | at |
7 arctacarars woomnrenSod Sa
Table 2-4 Game Option Settings
Aus Coins s not used in this game (Stee! Falons has # Ade Mins shows the number of minutes the game
‘no ausiliary coin switches), The number following the Aux Coins message should therefore always
hhas been idle
Active Mins shows the number of minutes the game has been played. Solo Mins shows the numbers of minutes the game ‘was played in the one-player mode
- Linked Mins shows the numbers of minutes the same was played in the two-player mode + New Games shows the number of new games that players started. + Continues shows the number of games that players continued
srr coms,
TOTAL Golms a7
“JUST PRESS 200M FOR HISTOORANS.
‘igure 2-7 Statistics Screen + Exror Gount shows the umber of errors counted in the erasable memory. I you have more than 0 errors, check the ZRAMS with the self-test, Your game ‘may aced service + Total Credits shows the total number of new anc continued games played + Total Coins shows the total number of coins insert
ced into both coin inlets for this side of the cabinet time per coin, time per credit, This data depends on how you set
+ Average Time/Coin shows the avers
game play
+ Average Time/Credit shows the average game play
the gime cost on the Coin Options menu
Histogram 1: Whole Game
Times in Minutes The first histogram sereen shows the distribution in the lenggi of playing time in minutes. This sereen is shown in Figure 28, Write these numbers on the statistics sheet in the back of this manual to help you maximize your profit
Histogram 2: Time per Credit in Seconds This histogram screen shows the distribution of play in length of playing time per credit
Histogram 3: Number of Times Level Started This histogram sereen shows how often players stared each playing level,
Figure 2-8 First Histogram Screen
Histogram 4: Number of
Times Level Quit at
This histogram screen shows how often players quit each playing level
Histogram 5: Number of Times Bonus Awarded at This Level This histogram screen shows how often players
received bonus points (received an “ace” of "pass" nit Histogram 6: Percentage of
ing) at each playing level
Time Played in Real Flight
‘This histogram screen shows what percentage of the time players pushed the “Real Heli Flight” button and played in the realistic helicopter flying (non-comput erassisted) mode
To move to the next screen, press the 200m button, To
clear all histograms, hold the Real Heli Flight button
and press the 200m huatton at the same time
Error Counts Figure 2-9 Error Counts Screen
‘on the Statistics sereen, by the way, shows Zero power
RAM (2RAM) etrons,
High Scores This screen shows the top 10 players’ name signed tem, plus the seores they achieved To clear the high score table, hold the Real Heli Flight buon and press the 200m button at the same time:
Control Inputs Screen
‘Check this screen as part of your regular maintenance to be sure the potentiometers and switches are operat ing correctly. The Control Inputs screen is shown in Figure 2-10. This screen shows the voltage inputs from the control poten tiometers to the A/D converter circuits on the Mulisyne PC hoard, As you use a control, the line length on the screen changes, showing the change in the voltage in put from the potentiometer. Ifthe line length does not change, you have a problem, Check Chapter 3 for tou bleshooting and repair information The first conteol on the screen is the volume control Gg snore any unlabeled lines in the top half of the screen), The volume control line shows the movement of the volume potentiometer. As you turn the volume control the line should change The middle postion of the screen lets you test the left and right coin switches, the Real Heli Fight switch, the Rump Thump solenoid, and the Real Heli Flight lamp, Activating any of these five contols should make the appropriate words on the screen turn green,
Figure 2-10 Control Inputs Screen
The bottom portion of the sercen lets you test the joy stick, collective, and rudder foot pedal. (The joystick movement is checked with two lines.) As you use the
‘ontols, the lines should become longer and shorter, If
the line does not move, then see Chapter 3 for more in Formation, If the volume control line or any of the bottom four lines are extremely jitery, either that pot is bad or the pot mounted inthe controls loose
For these controls, 0 Vols input appears a8 no Tine or a
shot line on the screen and 15 Volts appears as many lines across the screen,
Monitor Test Patterns
Use this item to see the fourteen sereens for checking the video display, the color RAMs, the GSP, which con
trols the video RAMs (VRAMs), and the video outpat. To button, and to go backwards press the trigger switch,
cycle Forwards through the sereens, press the thumb
* Color Bars screen shows these colors from left 10
Fight: white, yellow; light blue, green, purple, red blue, and grey. If the colors are incorrec, see Your video display manual for adjustment procedures # Monitor Adjust is used 1 set up the monitor Monitor Brighiness checks the adjustment ofthe vi. co display b
+ Grey Scaleshows a white line on the left, and a grey
scale with black on the left.
- BIW Dotscan he used to check ¢ avengence and fo
‘+ BAW Grid shows a black background and a white grid pattern to check convergence. The grid lines should be straight within 3.0 mm, Ifyou need 10 ad just the convergence, see the video display manual Included with the game © Diagonal Lines can be used t0 check video display linearity + Full Screen Golors Five sercens) test the co fof the color RAMS and the display. The test displays ‘grey, white, red, green, andl then bhte screen, Each Scteen should be a rectangle of color, with no eury iat the corners and no lines inthe raster. IF it does fot, see your video display manual ineluded with the game Tor adjustment procedures, + Monitor High Voltage Test switches between 4 white screen and a grey sereen. If the high voltage tthe display is regulated properly, the sides of the screen will Muctuate about % inch from the white (o the rey screen, ‘Scrolling Test checks the scrolling, mechanism in the sb,
Set Time Screen
Choose this tem if you want to set the clock, turn the clock on, or turn iCoft «See Figure 2-11, The clack is riot sed for eny fantetions ints game, bi the day date, and time are displayed at the bottom of the Test Menv screen.
To be able to change any clock settings, you must Fist tum on the clock. Choose Start Clock from the ment. In about two seconds, the clock sar CChoase the item you need from the menu by using ei ther the thumb button oF trigaer switch, Change the se= ting by pressing the 200m button until you sce the cor rect dime, date, or day displayed at the bottom of the If the clock is losing oF gaining time, then use Clock Faster of Clock Slower 10 adjust the calibration of the clock.
Stoceorr Bee bay Bee mone
Stowen crock
Figure 2-11 Set Time Screen
Tum off the clock only if you plan to store the game
more than six months. (The clock has 2 lithium battery tum off the clock, choose Clock Off from the clack sub
that should last more than five years in normal use.) To
menus then select EXIF and press the zoom button. The
items on the clock menu are explained below
‘= Bvirseturns you to the Tes + Ine Seconds advances the second seting, Monday or Tuesday) setting + Inc Year advances the year seting
Inc Hows inctements (advances) the hour setting, + bre Minutes advances the minute setting,
‘+ Inc Day advances the day of the week (for example
Ine Month advances the month setting,
= Inc Dateadvances the date setting,
+ Faster Clock advances the calibration setting. Each increase in this setting makes the clock ran about 5 seconds faster per month, + Clock Off rns the clock oft:
+ Dec Fours decrements (reverses) the hour setting, + Start Clock sarts the clock, Special Functions
Screens
Use the items on this screen, shown in Figure 2-12, if system or board failed the programa RAM and ROM test OF the board and micropeocessor test in the automated self-test. Also use this screen if you have problems with the joystick, collective, or foot pedal, ori the elock set tings or the statistics are erratic. The Special Functions items are explained as follows: 4 Exitsetums you to the Test menu ‘+ Main (stultisyne) Board GSP Tests should be used if you get the message Bad GSP VRAM or Bad GSP Color RAM in the automated self-test, This screen has six tests,
- Main Board MSP Tests should be used if you get an MSP error message in the automated selF-test ‘This sereen tests the Math Systems Processor:
‘+ Main Board ROM Checksums should be used if you get the message Bad Program ROM in the automated self test. This tests the ‘SPECIAL FUNCTIONS
exit MAIN BOARD OSP TESTS: MAIN BOARD MSP TESTS RESERVED MAIN BOARD ROM CHECKSUMS. MAIN BOARD ZAM TESTS DS ill BOARD TESTS: DsPcom BoaRD TESTS, ‘SOUND BOARD TESTS
Figure 2-12 Special Functions Screen
program ROMs individually and shows the results fon the screen,
Main Board ZRAM ‘Tests should be used if your con: trols settings are changing or erratic. Also use these tests if you suspect dhe game is not keeping the Slatistics or pot ranges correctly (See Error Counts Con the Statisties Screen.) DS III Board Tests should be used if you get any message other than D8 JIT Board OK for the DS Il board test in the automated self-test This sereen has three tests and a DS Ill ROM checksum test. I also has eight “scope loop” tests for factory use only. since they require schematies and an oscilloscope, DSPCOM Board Tests should be used if you get any message other than DSPCOM Board OK for the DSPCOM board test in the automated self-test. This screen has thece tests,
Sound Board Tests should be used if you get the message Bad Sound Board in the automated self
CHAPTER 3
Troubleshooting
and Maintenance
TRODUCTION
This chapter contains troubleshooting tablesand check and replace, and a description of steering repair procedures for your motor problems. The chap-
Steel Talons” game, The ter also includes informa-
chapter includes several
ee tion about connecting the
troubleshooting tables. The aX video display if it requires
tables contain general rou- separate positive syne and
bleshooting information, repair information for the
the voltage levels and test steering control and foot ROM-caused problems with specific ROMs to ROMs on the game PCB
points on the game printed-circuit board, a list of pedal assembly, and locations of the RAMs and ROM-caused problems with specific ROMs to ROMs on the game PCB.
Problem (Coin Mechanism Problem Suggested Act Chak te wing othe can mechan. (Grek te votags oa + sie of rechanis Testnecommecranome wen ts sound et srben he S18 ‘Game Play Problem
‘Joystick, Collective, oF Foot Pedal Prosiem
‘Sound Problem
Video Display Problem
ny cared sre appears
Pew sway, Pues upside coun, Comgoroe putty croaorerblems Petue inet core, ‘Seat Thumper Problem
Player Stations Won't Communicate Croat vaege eveson he PCB Seo Tete 32, Uotage ngs an Tost ats Gras nt ROM Preble ook ke, ale for pec BOM pelos ‘Have te cons Doe bested wih e caret ype oiuaican? ng, urease es how bpFigue 4249, an (Chace homens and execs Chcuthe ansehen te conta yao to corael apa. Nave you ratsonbd itcoecty? ibe aura hs pare an he coral aro goo epat ep replace pas Fossne ita ne sti colseve 28 oe pada cot. ete spear volume red up? Youre aust on ha brackatnside Pe sn door) hese vtageo te Multsyre PCB edge coectr heck he wen tom PC the speaker ‘Cheoktnovotag leo Pe POB. Se abe 2, Lotage nots and Test Pins. Replace ho speak
- lathe pame paged cr
- Sheganelumou ov? 3 Arete comeenons good? [sth nee gos Ie tie dept baghras tunes vo? Jeo sce comzcions nein ie and arson isthe aineyne PCB eg comocar gly connected? Chock alone sas welow you anser note ay question, you hav wine gare crit See as ade dsp See Pana 1 Doyau havo poms othe doo oso? ®. hee veo delay ari i? €. Dayourive nigh vetage m he veo dp?
- ema votaga vetsttha deo nay FCS cre? Pome volagels 100 VAC oF 110VAO, eoerdng ort a! vaeo dla Veo wghal atage #0310725 VO 19 evel isn coect check ne omnes ana ts arose Yu racy hae a seus RAM pobien 1 Dayoutave cnet paver otape oe veo clay POE? 2 Do you ave carecthig vlage bo evideo sna)?
- lee monte ound camecea to themenr?
- feethogepuiseomocted pope? ‘hen you serviced he aly you crocs the wis icone Sale the rao vera yoko wes on‘re aly, Use the steer testes ast be von slay Use procedures n you doo spy manus Use he centerng procecesin your viseo delay manual Only qualified technicians having experience with high-power dovices should touble- ‘hoot this system. The solenolds and the slenoldmater PCB run on lve voltage and can. ‘Suse sariove infury. Tor titer ferraton cone you sah id sows epvesmiave a topes) a vith veto sy,
ak srt corimicaan ik cable btwn he DAPOOW eorce i aged Table 3-1 Troubleshooting Table
Voltage Test Point or LED Sou
sss0ewo it tog 7 ‘are PC) CFS LED aye FCB) ii LED SAIS PCB) — CGRIOLED SS PCR
(beaotinaen
ww ‘CRALED SANS PCR) and Purpo:
ome eaeing power bey “Tops wren +57 is caring tomo ewiening power upp gris when Vis appiedto (Ugh when the +
- gti han espe gooa owing power supp Pole
Loris wien #5 ent on SAS bor Troshleshonting si Maintenance
FOB arte ei RST rg Ope
ply tr ne anaiog Grbuiry Vira escing power supa [corned Noga supply ore wralog
Table 3-2 Voltage Inputs and Test Points on the PCBS
Maintaining the Coin Mechanism
months. For detailed pats information on the coin door, 2, Open the gate on the door covering the magnet, Use
see Figure 43. To maintain the coin mechanism
- Tum power off tothe game. Open the upper coin door
the blade ofa serewelriverto serape away any metal i
ings collected on the magnet
- Fora thorough cleaning, wash the coin mechanism in hhot soapy water. Use a tooshbbrush to remove any’ stub bom build-up of residue in the coin path.
- Dry the coin mechanism with compressed ar If you do not want to use water, rush the loose dust off with 2 soft brush and scrub the residue in the coin
path with a toothbrush. Blow outall the loose dust and
dlst with compressed ir
Repairing the Video Display
Removing the Video Display Ifyou havea problem with the video display. fist run the selftest procedure to narrow down the cause. To make adjustments to the video display, unlock the service door fon the rea ofthe cabinet
you want to repair the video display, remove it from the
game by following this procedure: L. Turn the game power off and wait two minutes Unplug the power cord for safety
- While you wa the cabinet. unlock the upper rear service door on
- Remove the ro screws that atach the display shield retainer. Using the top finger hole, tlt the top of the shield towards you, and then lit i out of the bottom
- Remove the three wood cleats that secure the card board bezel. Then remove the bezel in front of the display
- Discharge the high voltage from the eathode-ray tube (CRT). The display assembly containsa circuit for discharging the high voltage to ground when power is
Tiolieshocing and Maintenance
| Problem | ROM Causing the Problem | Check the ROM al |
| Progamvers ba ron-paigonal(bimep) | Graphics, | gh 2004 200 200X200" tse beara |
oye are isang bac Uw 2102100, 20K 2101 Mey bos
| aaa paygoralobee | Gaohes | M205 | boa) |
| erbage onsen, pra GoeamT werk | Pacosr | 790K sy ars) |
Sates Rox ig 200 Lowe 210% (igre besa)
| aa gra aS | Pogan FONT. 256 | ‘BGS, 2105 2 210 (eRe BIO) |
‘Ne weundor erate sound “od ROWE ‘a Progra 1 (Sats boxe) ‘iso Sound ROMS IMGTN 2 SANS oar)
| ‘Carmarcsn ora | (wo payers caret beiriod) | DSP | BF (OSACOM Bows) |
Table 3-3 What ROM Problems Look Like
charging the high voltage to ground when power is
removed, However, to make certain, always discharge a. Attach one end of a solid 18-gauge wire o a well:
the display as Follows:
insulated screwdriver or wooden handle. b. Anach the other end ofthe wire to an earth ground. © Quickly touch the blade end of the screwdeiver to the CRT anode by sliding t under the anode cap, 4d, Wait wo minutes and repeat part
- Remove the four bolts and washers that secure the video display. This hardware
18 atthe four comers of the display frame,
Disconnect the hamess connectors from the video display. Pll the video display assembly our through the front of the cabinet. Be extremely careful
Replacing the Video Display Perform the following procedure to replace the video display in the cabinet.
- Carefully lit the video display into the cabinet.
- Install the four sets of bots and washers that hold the video display assembly:
- Connect the power and signal harnesses to the video sisplay IF you replace the CRT and yoke together, adjust the bightness, siz, and centering as described inthe vid: 0 display service manual, Check the purity and convergence according to that manual, but adjust both only if required.
- Install the video display cardboard bezel, cleats, shield, and retainer.
Lock the upper rear service door on the cabinet
Joystick Control
The joystick (cyclic) contol is shown in Figure 4-2. Ifyou ‘want (0 repair the joystick control, disassemble it by removing il from the pod on the control panel. The hard ‘ware that secures the pod and joystick control is shown, in Figure 4-1.
Foot Pedal Assembly
‘The rudder foot pedal assembly is shown in Figure 43. If you want to repair the foot pedal, disassemble it by removing it from the front of the game cabinet. The hace ‘ware that secures the foot pedal is shown in Figure 41
Collective Control The collective control assembly (the lever witha yel- Jow handle mounted next tothe seat) is shown in Figure 4-4. IF you want to repair the collec: tive, disassemble it by removing it from the seat platform. The hardware that secures the collective is shown in Figure 41
ignal
| + | Rea | 7 | GND |
| 2 | Bue | 3 | Key |
| 3 | GND | 8 | Negatweconpeste syne |
| £ | Gren | 10 | Pate syne |
| 5 | GO | 1 | Poatie Mine |
8 Red
Table 3-4 Atari Games Video Connector (J10) Pin Assignments
ROMs and RAMs
I you have think you have bad ROMs or RAMs, perform the ROM or RAM test in the self-test. If you have a ROM. problem, see Table 3.3. Ifyou see only a colored screen, and cannot enter the self-test, see Table 3-4 and make su all connections are working. For the locaton ofall the ROMs and RAMs on the Multisync PCB, see Figure 4-8, LEDs on the
Multisync PCB
The LEDs (lightemitting diodes) on the Multisyne PCB show you the status of various signals on the Multisync PCB, Using the LEDs, you can check signals from various circuits going to the 68010 processor. The state ofthe signals is indicated by the LEDs that Rash or stay lit Figure 3-1 shows the location of the LEDs on the Mult
sync PCB. Table 2-5 shows the possible status of the LEDs,
‘with an explanation of what they indicate.
j008000 a]
Figure 3-1 DIP Switch and LED Locations on the Multisyne PCB
Aun LED Sateo{ GAD HALT signa ‘Oh ahen E8010 isn (then BH010 process not unning Fasnnig at 2H2 te GB010 cael ur te watendog ond clack mul be ‘urn ‘Tra Run£0 sen inthe game mse DTACK LED Sia 1 GB010 OTACK Gen acknoniedpe) Sera ‘Dr nhen te 3010 pocessr nang wd ating TOS PEER Fases at 2e wnen ne 69010 processor carne un the watchdog and pcestr clocks runing). The DTACK LEDs on nthe game rode ‘Glock LED Sato ote GavTO poser cock Sara ‘huhenihe gana board sen Oats process cack sala tuck igh or ow TQS LED Saioor al ceoTO mera ‘inte gare moce (tintaravare aagnasie mode onde ety par ot aes tit ects are occuring or any aero sia s suck. Table 3-5 LED Status
CHAPTER
Illustrated Parts Lists
Part ORDERING INFORMATION
This chapter provides information you need to order parts for your game, J
The parts lists (except for the
PCB parts lists) are arranged alphanumerically by Atari part number, All A~ prefix numbers, which are assemblies, come first. Next are part numbers with six numbers followed by a hyphen (000598- through 201000-). Ending the list are part numbers with a two-number designation followed by hyphen (00- through 99-). J The PCB parts lists are arranged in alphabetical order by component, Within each section the parts are ar-
ranged numerically by part number. When you or der parts, give the part number, part name, the number of this manual, and the serial number of your game. With this infor-
mation, we can fill your order rapidly and cor rectly. We hope this will create less downtime and more profit from your games. J Atari Games Customer Service phone numbers are listed on the inside front cover of this manual
Figure 4-1 Cabinet Mounted Assemblies, Front View A049570-01 D
waa Beta esas ‘Right Colurnn Lower Osea! parte Serew — aoe Sieg Fight Column vere ‘Decal ion i} on
lence) Gaonn Seca eae
(repteces) ‘nossseta2 ‘ween <font say. Metin Seta Any ‘eae Pras) Figure 4-1 Cabinet-Mounted Assemblies, Front View, Continued. 4049570-01 D
Figure 4-1 Cabinet Mounted Assemblies, Rear View 4049570-01 D
Figure 4-1 Cabinet Mounted Assemblies, Rear View 4049570-01 D
Suet Toons
reeset
Baan eam
‘Sa Up cone
595.01 ~ Fra a nay eeneg Soom “eet (poces) ‘see eee \eecbeiaet ‘pce
ahr Suny ay frotseno — zaes128 toxaraeie aes) 18 Sve “pe Soe ‘oot (epee a pei sone oy aagons a ‘Boacet oseson2 —aotnaat inate Pos Assy. BSPCCM PCE Ay. (Bosc (2puces ‘cosy freon 708 DSPs Ay Fe Vasber Pola (nocee
aire ota hy rasa)
Figure 4-1 Cabinet-Mounted Assemblies, Rear View, Continued 4049570-01 D
oF @ L0-€106F0V, Aiquiassy sqepag soppmy 7+ aansEy na) emo EP opera | | ote one) [once mam gel (Sd Eee oon
464.011
{ote eae aco)
E00" Hor Sot ta
amps Stra seed
Figure 4-3 Collective Control Assembly A048066-01 A
Figure 4-4 Pot Joystick Assembly 4049009-01 B
age Hara Gn Ay trun pate ton on spa, Soop toys and aa)
y7e208-0
aren
6005001) con rape
pace)
{Sano rch
Patooyatee Mande
Figure 4-4 Pot Joystick Assembly, Continued A049009-01 B
usr Pas ss
Figure 4-5 Right Power Supply Assembly ‘A049668-01 A
oma
Figure 4.6 Left Power Supply Assembly 4049666-01 A
4n
Figure 4-7 Four-Entry Coin Door Assembly 171101-001
a
a
Figure 4-7 Four-Entry Coin Door Assembly 171101-001
Illustrated Parts Lists Steel Talons
oe jag AsOye go tazuttane oP ee a en. 5 of fi: are eel Eptest art oe eT Sout
| Ss | 08 | 08 | Ay | 197546-003 fd eg, “H |
1a7sve-003 mah
| ce | eee | ee oe |
| 573 | Assy | pus |
ena ae 137359-008 a T sstss = os
| — = | an Ls pr | Pal | aps |
oetasn ers reas re Seca anna al
Se SOR I
| SF] | fEL | PE; | Ey | Tel] | ey | yay | le |
os =a] ae bre bo pogo woe 4 N
S FSS SSS FS De) re ahesT 202] £07 me) whasT Bo: a]
- fora] fo a5 =] =)
a
| en | . | uss | |||
| Sposa | 2 Yan | oe vad aie a | |||
| ahs | : | oe | aa7sss-one “"aarsss-one | BOSS] SEOTRR] | ied |
| fon a a | My SE | ec | Pat fT TT of |
ee <
| — ci © aa gy cIHNHHHHE | Ceo sis | *aP |
Sp — i Oyo pods Spl sox = @
| eo =a LP a 82 posit Ed | fos oho oat Sag pene | poste | fo of |
bik vz? | Om bo eatin Sure pol
| Bore is , tori 9 i | aes | som] goss) gop me |
eral = iB got 0 posta lp 3 some gore) Goeam] nie
| MF « at wees ne | 8 | aosthsist | are sei |
| i" | fe cero po | OS RE | |
| 8 | ae 2 | & | sos |
ia ——a == i
| 2 eee | q | 1 | a | |
| %0 | 0S) — (¢) a 0) | mn bo | ||
| =z << cH | wD | 7 | ||
| eft] | lellelleyjelfal | jaya | 3 | F |
| iS | = | = FE |
& & §
Figure 4-8 Multisync PCB Assembly A044998-03 B
Steel Talons
| ras 2 | gp | we | gixcen TM h |
= eee = Fs
| = | = | - | s |
| cory | 7 | ALsi36 | |
| a | a | a | |
| = 00: | -002 | = | SlOL wwe |
| id | ] | = _ 2 | = : OF sta FLsieL Sosa |
(th: 8 eosin 2 ny
| g | 3 | gf | ||
| 0 | i | Dott | See | rs |
a]
| a © | bo | Wor | SuSE | wos |
| oy | pee —antity 2 eof] | goth |
2 ce tog poy q Ost OZT OST OST
of = ve YO ri CI me i _t
1: rey
To, =! mem 5,
gore] gost) gos Ste gos Sie SOL —Bosse) gos] nhs to: socnomnes (ee nl W soos T= poe q Ors] Sore ce
| = | ox | wo | BD |
HH
| e]faljal | la | Me |
MSS g aor '
JLILILI * & &
| i | & | & | & | com |
40. fo: a a _ a for wos ES “Ho &R
Figure 4-8 Multisync PCB Assembly, Continued A044998-03 B 1 = 54
ar ane 56 [Gag fe sion a dq U -SESTE oa 1 Og F007 @0> f= |, “t E ee O eww oy,
Fs) Die ant ear 02 == 07 = 0 =n =
fated Parts Lists Steel Talons
Multisync PCB Assembly Parts List
| Designator Description | Part No. | Description Designator | Part No. | ||
| 30D | Socket, 28 Pin, .600-Inch | 179257-028 | Toy | Integrated Circuit, 748808 | 137484-001 |
| 5SLMSP. 1208-PSP, 1508-GSP | Integrated Circuit, | 137137-001 | |||
| Socket, 68 Pin | 179237-068 | 75H | Integrated Circuit | 137036-001 | |
| 190K | Socket, 64 Pin, .900-Inch | 179256-064 | 80M | Integrated Circuit, 74 | 137517-001 |
200E Socket, 24 Pin, .600-Inch Integrated Circuit, 7418374 137 144-001 200K Socket. 24 Pin, .300-Inch 85U, 85W. 200R, 2005, 2007, 200, 200V, 200, 20x, 200Y Integrated Circuit, VRAM, 64KX4, 150
| Sc | 8 Pin, .600-Inch | 179257- | nsec” | 137553-D02 | ||
| 2108 | Socket, 24 Pin, .600-Inch | 179257 | OM | Integrated Circuit, | T4ALS08 | 137460-001 |
| 210K, 2108, 2107, 210U, | 210V, 210W, 210%, 210Y | 95C | Integrated Circuit, 7418374 | 137144-001 |
15M
20P: 208,20U.20W 25K
25M
30B 30D, 30? 308.300, 30W
30Y 35K
35M 40H
405,400 40WW 40Y “5B 50H
55L-MSP, 608, 60D
GOP, 608, 60U, 6OW OY 65C 70P, 708, TOU, 70W
4-10 X" Integrated Cir Socket, 28 Pin, .600-Inch
Integrated Circuit, DRAM, 4464, 64KX4, 150 nsec Integrated Circuit, 74F244 Integrated Circuit, DRAM, 4464, 6AKXA, 150 nsec Integrated Circuit, 74ALS245
Integrated Circuit, 74AL8574 Integrated Circuit, 74BCT20823 Integrated Circuit, GAKXA, 150 nsec Integrated Circuit, 7
Integrated Circuit, 7418374 Integrated Cireuit, AD7582 Integrated Circuit, 74182 Integrated Circuit, 2149, 45 nsec
Integrated Circuit, 74182 Integrated Circuit, DRAM, 4464, GaKX4, 150 nsec Integrated Circuit, 74ALS245 Integrated Circuit, 7418123
Integrated Circuit, 2149, 45 nsec Integrated Circuit, 7418245 Integrated , ADCO8O9 Integrated , 7418123
Integrated Circuit, Integrated Circuit, Integrated Circuit, 7448244
Integrated Circuit, VRAM, 64KX4, 150 nsec* Integrated Circuit, 7448138 Integrated Circuit, 7418259 Integrated Circuit, VRAM, 64KX4, 150 nsec* 179257-028
137546-003 137502-001
137546-003 137440-001
137513-003
137546-003 137547-001
137144-001 137545-001 137134-001 137199-002
137134-001
137199-002 137134-001
137038-001
137553-002
22-001 7137-001
137553-002 100M 110c 110K
120K
1208-PSP_ 1201 120W, 120Y 135C, 1351
135K 135M 135P. 135U
135W 135Y
140H
140K 140M 140P 140U
150, 1500 150K
150S-GSP Integrated Circuit, VRAM, 4KX%. 150 nsec Integrated Circu Integrated Cireu Integrated Cir
Integrated Circuit, Integrated Circuit, 7 Integrated Circuit, Integrated Circuit,
Integrated Circuit, 3401250 Integrated Circuit, 74F244 Integrated Circuit, Integrated Circuit, 7
Integrated Circuit, 744832 Integrated Circuit, 74L874 Integrated Circuit, 7448573 Integrated Circuit, 744800
Integrated Circuit, Integrated Circuit, Integrated Circuit, Integrated Circuit, 7418393
Integrated TAFL1 Integrated , TAALSTA Integrated Circuit, 7418244 Integrated Circuit, 744808
Integrated Circuit, 7418245 Integrated Circuit, 7415244 Integrated Circuit, 741 Integrated Circuit, 741820
Integrated Integrated Integrated Integrated Circuit, 74F161
Integrated Circuit, 7415244 13747 137052-001 137517-001
137436-001 137146-001 137548-001 137547-001
137559-001 137502-001
137436-001
137487-001 137023-001
137480-001
137547-001 137137-001 137038-001 137146-001
137583-001 137156-001 137038-001 137484-001
137134-001 137038-001 137023-001 137060-001
137538-002
137038-001
Steel Talons Mlustrated Parts Lists
Multisync PCB Assembly, Continued Parts List
| Designator Description | Part No. | Description Designator | Part No. | |||
| 160F | Integrated Circuit, 74418161 | 2108 | Integrated Circuit, EI | 136087-1003 | ||
| 160H | Integrated Circuit, 7441832 | 20T | Integrated Circuit, | 136087-1005 | ||
| 160K | Integrated Circuit, 74ALS138 | 210U | Integrated Circuit, EPROM | 136087-1007 | ||
| 210V | Integrated Circuit, EPROM | 136087-1009 | ||||
| 160M | Integrated Circuit, 74°04 | 137437-001 | ||||
| 160U | Integrated Circuit, | 744832 | 137487-001 | 210W | Integrated Circuit, EPROM | 136087-1011 |
| 160W | Integrated Circuit, | 741874 | 137023-001 | 20x, | Integrated Circuit, EPROM | 136087-1013 |
| 170C | Integrated Circuit, 7418245 | 137134-001 | 210y | Integrated Circuit, EPROM | 136087-1015 | |
| 1708 | Integrated Circuit, 7418244 | 137038-001 | BCLK | Connector, Rept, 2 Ckt | 179178-002 | |
| 170H | Integrated Circuit, | 7418148 | 137417-001 | NOTE; Place receptacle for BCLK on “QB” | ||
| 170K | Integrated | Circuit, 74ALS161 | 137470-001 | BCLK. | Connector, 4 Ckt, Header, 100 Ctr | —-179177-004 |
| 175 | Integrated Circuit, 7418245 | 137134-001 | BLU | ‘Test Point | 179051-001 | |
| 1757 | Integrated Circuit, 744808 | 3 | cl | Capacitor, 100 UF, 35 V, Electrolytic | 124000-107 | |
| 175W | Integrated Circuit, | SCOM | 137526-001 | 2 | Capacitor, .01 HF, 50 V, +80%-20%, | —122002-103 |
| 180C | Integrated Circuit, 74ALS138 | 137517-001 | Ceramic | |||
| 180E | Integrated Circuit, 74ALS139 | 137467-001 | C3-C14, C16, |
C19-C21, C24-C43
| i90C | Integrated Circuit, | 7418393 | 137146-001 | Capacitor, .1 HF, 50 V,+480%420%, | —122002-104 | |
| 190E | Integrated | 74AS00 | 137480-001 | Ceramic | ||
| 190K | Integrated Circuit, 68010 | 137414-002 | ||||
| 190N | Integrated Circuit, | 7418245 | 137134-001 | C44-C63 | Capacitor, 1000 pF, 100 V, Ceramic | —-122015-102 |
€65-C78, C80,
| 200€, 200D | Integrated Circuit, RAM, SKX8, 100 nsec | 137535-004 | €85-C87_——Capacitor, .1 MF, 50 V,+480%+20%, | 122002-104 | ||
| 2001 | Integrated Circuit, 48T02-15, RAM | 137540-150 | Ceramic | |||
| 200F | Integrated Circuit, 7418245 | 137134-001 | C88-COL_——_ | Capacitor, .22 UF, 50 V, | #10%, | Ceramic 122015-224 |
| 200H, 200) | Integrated Circuit, 7418244 | 137038-001 | 92 | Capacitor, .1 UF, 50 V, +80%-20%, | 122002-104 |
Ceramic
| 200K | Integrated Circuit, SLOOP | 136087-9001 | |||
| 2001 | Integrated Circuit, 74ALS32 | 137464-001 | 93 | Capacitor, 10 UP, 35 V, Electrolytic | _124000-106 |
| 200M | Integrated Circuit, 74ALS138 | 137517-001 | C94-C106 | Capacitor, .1 HP, 50 V, +80%-20%, | 122002-104 |
| 200N, 200P | Integrated Circuit, 7418245 | 137134.001 | Ceramic |
C108-C111 Capacitor, 22 WF, 50 V, 10%, Ceramic 122015-224
| 200R | Integrated Circuit, EPROM | 136087-1002 | CLZCH8 — Capacitor, .1 UF, 50 V, +80%-20%, | 122002-104 | |
| 2008 | Integrated Circuit, EPROM | 136087-1004 | Ceramic | ||
| 2007 | Integrated Circuit, EPROM | 136087-1006 | |||
| 200U | Integrated Circuit, EPROM | 136087-1008 | cig | Capacitor, 3900 pF, 50 V, Ceramic | 12020-3092 |
| C120 | Capacitor, 560 pF, 50 V, Ceramic | 122020-561 | |||
| 200V | Integrated Circuit, EPROM | 136087-1010 | C121 | Capacitor, 10 MP, 35 V, Electrolytic | —_-124000-106 |
| 200w | Integrated Circuit, PROM | 136087-1012 | 122 | Capacitor, .0022 HF, 100 V, Plastic | 121022-222 |
| 200X | Integrated Circuit, EPROM | 136087-1014 | |||
| 200 | Integrated Circuit, EPROM | 136087-1016 | C123, C124 | Capacitor, .1 fF, 50 V, +80%-20%, | 122002-104 |
Ceramic
| 210C, 210D | Integrated Circuit, RAM, 8KX8, 100 nsec | 137535-004 | C125-C128 | Capacitor, 10 | UP, 35 V, Electrolytic | 1240-106 |
| 2108 | Integrated Circuit, 48202-15, RAM | C129-C137_— | Capacitor, .1 MF, 50 V, +80%-20%, | 122002-104 | ||
| 210F | Integrated Circuit, 7418245 | Ceramic | ||||
| 210H, 210J, 210K | €138, C139 | Capacitor, 1000 pF, 100 V, +5%, | 122016-102 | |||
| Integrated Circuit, 7415244 | 137038-001 | Ceramic | ||||
| C140, C141 | Capacitor, .1 UF, 50 V, +80%-20%, | 122002-104 | ||||
| 210L, 210M | Integrated Circuit, 7418245 | 137134-001 | Ceramic | |||
| 210N | Integrated Circuit, | 137038-001 | ql | Capacitor, .22 WF, 50 V,+10%, Ceramic | 122015-224 | |
| 210P | Integrated Circuit, 7418245 | 137134-001 | C143, | C144 | Capacitor, .1 pF, 50 V, +80%-20%, | 122002-104 |
| 210R | Integrated Circuit, EPROM | 136087-1001 | Ceramic |
4:17
Illustrated Parts Lists Steel Talons
Multisync PCB Assembly, Continued Parts List
| Designator Description | Part No. | Description Designator | Part No. | ||
| cas | Capacitor, 10 UF, 35 V, Electrolytic | 1240-106 | SYNC. | Test Point | 179051-001 |
| C46-C189, | DIAGN. | Test Point | 179051-001 | ||
| C19: | GND1-TP9 | Test Point | 179051-001 | ||
| Capacitor, .1 UF, 50 V, +80%-20%, | 122002-104 | GRN. | Test Point | 179051-001 |
Ceramic
| n | Connector, 12 Circuit, Header .250 Cir | 179069-012 | |||
| 228 | Capacitor, 1000 pF, 100V, Ceramic | 122015-102 | JiJ6 | Connector, 11 Circuit, Header, 100 Cir 179118-011 | |
| 29 | Capacitor, 47 pF, 100 V, £5%, Ceramic | 122016-470 | y | Connector, Header, 60 Circuit, 1 Ctr | 179021-060 |
| €230-€238, | Jsjul | Connector, 11 Circuit, Header, 100 Cir 179148-011 | |||
| €243-€249 | Capacitor, .1 ME, 50 V, +80%-20%, | 122002-104 | |||
| Ceramic | ju | Connector, 26 Circuit, Header, 1X 1 | |||
| 0250 | Capacitor, 47 pF, 100 V, +5%, Ceramic | 122016-470 | Dual | 179261-026 |
Jas Connector, 16 Circuit, Header, 1X .1
| €251-€259, | Dual | 179261-016 | |||
| €264-€273 | Capacitor, .1 UF, 50 V, +80%-20%, | 122002-104 | |||
| Ceramic | ‘Transistor, 2N6044 | 133042-001 | |||
| C274 | Capacitor, 47 pF, 100 V, #5%, Ceramic | 122016-470 | @ | Integrated Circuit, 7905 | 137581-001 |
| €275-€293, | a | Integrated Circuit, 7812 | |||
| €298, C299, | res) | Transistor, 2N3904 | |||
| €306-C320 | Capacitor, .1 UF, 50 V, +80%-20%, | 122002-104 | |||
| Cerami | @ | ‘Transistor, | 2N3906 | 133040-001 | |
| 322 | Capacitor, 10 uP, 35 V, Electrolytic | —_-124000-106 | Q | ‘Transistor, 2N3904 | 133041-001 |
| Q8 | Transistor, 2N3906 | 133040-001 | |||
| €323-C326 | Capacitor, 10 pF, 100 V, +5%, Ceramic | 122016-100 | @ | Transistor, 2N3904 | 133041-001 |
€332, C333,
| €337-C343— | Capacitor, .1 UP, 50 V, +80%-20%, | 122002-104 | Quo | Transistor, 2N3906 | 133040-001 |
| Ceramic | QUL-Q13 | Transistor, 2 | 133041-001 |
€344-C347 Capacitor, 100 pF, 100 V, 45%, Ceramic 122016-101
| €348-C352__ | Capacitor, .1 MF, 50 V, +80%-20%, | 122002-104 | RL-R26 | Resistor, 100 Q, £5%, 1/4 W | 110000-101 |
| Ceramic | R20-R45 | Resistor, 1K Q, +5%, 1/4 W | 110000-102 |
R46-R48——_Resistor, 470. Q, $5%, 1/4 W 110000-471
| C356 | Capacitor, 10 UF, | 35V, Electrolytic | —_-124000-106 | RAO-RS4 | Resistor, 47 K.Q, | 110000-472 |
| C358, | Capacitor, .1 JF, 50 V, +80%-20%, | 122002-104 | ||||
| Ceramic | R55 | Resistor, 100 Q, +5%, 1 | 110000-101 | |||
| €359, C360 | Capacitor, 1000 pF, 100V, Ceramic | 122015-102 | R57, R58_——_Resistor, 1 K Q, +5%, 1/4 W | 110000-102 | ||
| €369-€377, | ROL | Resistor, 4.7 K Q, £5%, 1/4 | W | |||
| 0379) | Capacitor, 1 UF, 50 V, +80%-20%, | 122002-104 | R62, R63__—_—Resistor, 220 Q, £5%, 1/4 W |
Ceramic
| RO4-R67 | Resistor, 5.6 K Q, 45%, 1/4 W | 110000-562 | ||||
| CRI, CR2—_ | Diode, MV5053, Light-Emitting | 131027-002 | ROB | Resistor, 1 K Q, #5%, 1/4 W | 110000-102 | |
| CR3,CR4—_ | Diode, 1N914 | 131052-001 | ROO | Resistor, Metal Film, 56 K Q, #1%, | ||
| CRS | Diode, 1N4002 | 131048-002 | aw | 11001-5602 | ||
| CRG | Diode, MV5053, Light-Emitting | 131027-002 | R7O-R73. | Resistor, 2200, | aw | 110000221 |
| CR7,CR8.—_-Diode, 1N4002 | 131048-002 | R74, R75——_Resistor, 10 K Q, # | 110000-103 | |||
| CRI-CRI2—_Diode, MV5053, Light-Emitting | 131027-002 | R76 | Resistor, 220 Q, $5%, 1/4 W | 110000-221 | ||
| CRIB | Diode, 1N4002 | 131048-002 | R77,R78_——_ | Resistor, 4.7 K Q, £5%, 1/4 W | 110000-472 | |
| cRid | Diode, MV5053, Light-Emitting | 131027-002 | R79 | Resistor, 47 K Q, | 45%, 1/4 W | 110000-473 |
| cRI7 | Diode, 1N4733 | A, 5.1 V, Zener | 131009-206 | Resistor, 1 K Q, | £5%, 1/4 W | 110000-102 |
| CRIB | Diode, 1N4002 | 131048-002 | Resistor, 470 Q, 5%, | 1/4 W | 110000-471 | |
| cri9 | Diode, 1N4742 A, 12 V, Zener | 131009-215, | Resistor, 10 K Q, 5%, 1/4 W | 110000-103 | ||
| R20, CR23__ | Diode, 1N4002 | 131048-002 | RB9-ROG | Resistor, 33.2, 45%, 1/4 W | 110000-330 |
Steel Talons Illustrated Parts Lists
Multisync PCB Assembly, Continued Parts List
| Designator Description | Part No. | Description Designator | Part | ||
| ROB-RLOL | Resistor, 100 @, 45%, 1/4 W | 110000-101 | SPEED | Connector, 6 Ckt, Header, .100Ctr | —_-179177-006 |
| R102-R107 | Resistor, 33 Q, +5%, 1/4 W | 1100-330 | SPEED | Connector, Rept, 2 Ckt | 179178-002 |
R109-RIIL NOTE: Place receptacle for SPEED on *
| RIZ-RIIS | Resistor, 100 Q, 5%, 1/4 W | 110000-101 | ||||
| RIIG-R123___ | Resistor, 33 02, £5%, 1/4 W | 110000-330 | Swi | Switch, 8 Pos DIP | 160031-008 | |
| R124 | Resistor, 220 0, 45%, 1/4 W | 110000-221 | TP++1005V1_ Test Point | 179051-001 | ||
| RI25-RIZ1 | Resistor, 1K Q, 45%, 1/4 W | 110000-102 | ‘TP++1005V2. | Test Point | 179051-001 | |
| R132 | Resistor, 4.7 K Q, 5%, 1/4 W | 110000-47: | TP++1012V1_ Test Point | 17905 | ||
| RI34 | Resistor, | 1K Q, 25%, 1/4 W | 110000-102 | TP++1015V1_ Test Point | 17905 | |
| RIA | Resistor, 620 Q, #5%, 1/4 W | 110000-621 | ‘TP3, TP-TP5V1, TP-TP22V1 | |||
| RSS | Resistor, 0 Q, $5%, 1/4 W | 110005-001 | ‘Test Point | 179051-001 | ||
| R156-R159 | Resistor, 5.6 K Q, £5%, 1/4 W | 110000-562 | ||||
| R160, R161 | Resistor, 10 K Q, #5%, | 1/4 W | 110000-103 | VCLK | Connector, Rept, 2 Ckt | 179178-002 |
VCLK Connector, 6 Ckt, Header, .100Ctr—179177-006
| R162, R163 | Resistor, 150 0, +5%, 1/4 W | 110000-151 | NOTE: Place receptable for VCLK on *QB/2” | ||
| RIGERIO7 | Resistor, 470 Q, 45%, 1/4 W | 110000-471 | WD-DIS | Test Point | 179051-001 |
RIGB-RITL — Resistor, 10K Q, £5%, 1/4 W 14.0000-103
| R175 | Resistor, 91.Q, #5%, 1/4 W | 110000-910 | XOSC1 | Crystal, | 32.000, Oscillator Module | 144008-002 |
xosc2 i8 Mhz, Oscillator Module 144008-003
| R176 | Resistor, 68 Q, +5%, 1/4 W | 110000-680 | XOSC4 | Crystal, 32.000, Oscillator Module | 144008-002 |
| RI77, RIT8_— | Resistor, 100 Q, 45%, 1/4 W | 110000-101 | |||
| R194 | Resistor, 10 K Q, £5%, 1/4 W | 110000-103 | “Acceptable substitute is part no. 137553-001, Integrated Circuit, |
64K x 4 VRAM, 120 nsec, or part no. 137553-003, Integrated
| RED. | Test Point | 179051-001 | Circuit, 64K x 4, VRAM, 100 nsec |
| RESET. | Test Point | 179051-001 | |
| RNI,RN2 | Resistor Network, 470X9, | 118010-471 |
1/8 W, SIP (10-pin)
| RN3-RNS | Resistor Network, R2R Ladder | 118015-001 |
| RNG | Resistor Network, 4.7KX9, 5%, | 118010-472 |
1/8 W, SIP (10-pin)
| SCOM | Connector, 11 Circuit, Header, 100 Ctr | 179118-011 |
4-19
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
Figure 4-10 DSPCOM PCB Assembly A049348-01 A
4-21 ° MVSO53 MV5053
*O el+ we. ust Ls2!
Bao, Ls2us BPN Ls24s
2027 = bad oo 10s 2 OL
7406 Ls244 8g Ls374 Ls374 Ls244 i -2Sreftaoe Sana oo ool
@ Lszuy Q LS374 i Ls374 Ls374 g usa74
}O2_= 102 om 102 _«
Oro0 F74 2: oes 750LSi44 & 7sacsi95
ar 202-2103 = } TM 5_«
F230 ara] \g ee g om BREESE oxo [a yLoniz e902 =]
o™ 0 |
- ra38 ft 205 =]
o as Steel Talons IMlustrated Parts Lists
4-22 Figure 4-11 Steel Talons Rump Thump Assembly A049536-01 A we aye °OI C4 ry ThOEDON a
dz x P33 np
Q TOSNT in nn
actr ASZT’TO Toa ro NOILNYD ae QUEZZIUN 20 120V MJ2 120V Mlustrated Pants Lists Steel Talons
Steel Talons Illustrated Parts Lists
Steel Talons Rump Thump PCB Assembly Parts List
| Designator Description | Part No. | Description Designator | Part No. | |
| cust) | Nut/Washer Assy, 6-32, Zine | 177026-1036 | ||
| (HSI) | Screw, Pan, 6-32X3/8, X-Rec, Cadmium | 72-16068 | RL, R2 | Resistor, 330 0, 25%, 1/8 W |
| Cl, C2. | Capacitor, 01 tF, 125 V RMS, Ceramic Disc 120010-103 | R3 | Resistor, 39 Q, +5%, 1/2 W | 110001-390 |
| Capacitor, -1 HF, 50 V, +80%-20%, Ceramic | 122002-104 | RA | Resistor, 270 Q, $5%, 1/8 W | 110027-271 |
| Capacitor, 3300 pF, 25 V, Electrolyt | 123003-338 | RS | Resistor, 39 Q, 45%, 2 W | 110001-390 |
| Diode, IN5401 | 131051-002 | RO, R7 | 110027-331 | |
| Diode, 1N4001 | 131048-001 | RS | 110027-271 |
Heat Sink, TO-220, 1.5.X.5 178190-124
| UL, U2 | Opto-Iso, Triac, MOC3041 | 138008-001 | ||||
| Ji | Connector, 11 Circuit, Header, 100 Ctr, Key 2179118011 | U3 | Integrated Circuit, | 7815 | 137598-001 | |
| JISV | Connector, 6 | Circuit, Header, .250 Ctr | 179069-006 | (casi) | Compound, Thermal | 107031-001 |
| Mj2 | Connector, 3 Ckt, Header, .250 | Ctr | 179069-003 | |||
| Q.@ | ‘Triac, | 600 V/25 A, MAC223A8 | 133053-001 |
4-23
Figure 4-12 SAIIS (Audio) PCB Assembly A048479-XX A g++ BRR S| woke at apne a =the eT anc)
f iz 02_=_] et ie LS393_ ag ; aes Qs ak, He cere estate o o
woe OF v= mie gee jo o 0p] 28% qg0 82 aagd FEF Posed asi (0 i b | — LM3403 eg af Mlustrated Parts Lists Steel Talons
Steel Talons Mlustrated Parts Lists
SAIIS PCB Assembly Parts List
| PartNo. | Description | Designator | PartNo. | Description | Designator |
| 3N | Integrated Circuit, MSM6295 | 137607-001 | 2H | Integrated Circuit, 7418138 | 137177-001 |
| 1D | Integrated Circuit, 65028 | 137577-001 | 4 | Integrated Circuit, 74LS174 | 137122-001 |
| y | Integrated Circuit, RAM, 8KX8, | 137535-004 | 4E | Integrated Circuit, 7418240 | 137251-001 |
100 ns, .6
| aL | Integrated Circuit, SCOM | 137526-001 | 48/M, 4K/L__ | Integrated Circuit, 7418273 | 137040-001 |
| 4B1 | Integrated Circuit, YM2151 | 137401-001 | 3B, 3A/B | Integrated Circuit, 7418393 | 137146-001 |
Integrated Circuit, 741874 137023-001
| 4A | Integrated Circuit, YM3012 | 137402-001 | Integrated Circuit, 741886 | 137079-001 | |
| 1M | EPROM, 200 ns, 128KX8 | 136087-5002 | |||
| IR | EPROM, 200 | ns, 128KX8 | 136087-5005 | Integrated Circuit, 7805 | 137596-001 |
| 1F | EPROM, 200 ns, 64KX8 | 136087-5001 | Integrated Circuit, 7812 | 137 |
|, Integrated Circuit, Quad Op-Amp, —_137673-001
| GALI6V8, 25 ns | 136085-1038 | M3403 | |
| GALI6V8, 25 ns | 136085-1039 | Integrated Circuit, TDA2030 | 137301-001 |
Capacitor, IMF, 50V, 122002-104 Inductor, 10H 141024-001 Resistor, 0.Q, 5%, 1/4W 110005-001
| 9, C63- | R97, R100, | Resistor, | 12, 5%, 1/8W | 110027-010 |
R106, R109
| C84-C89, €91-C93 | R52, R61, | Resistor, 10.0, 5%, 1/8W | 110027-100 |
R85, ROS
| C56 | Capacitor, .INF, 50V, 10%, Ceramic | 122015-104 | R24 | Resistor, 100K 2, 5% | 110027-104 |
| 7, | Capacitor, 22uF, SOV, 10%, Ceramic | 122015-224 | RO, RIS, | Resistor, 10K Q, 5%, 1/8W | 110027-103 |
| C43, | C46, | Capacitor, 1000pF, 100¥, 10%, Ceramic 122015-102 | R26, R51, RGO, R75 | ||
| C47, | C50, C60 | R44, R45, | Resistor, 12K Q, 5%, 1/8W | 110027-123 | |
| CH-C12, | C18 | Capacitor, 100pF, 100V, 5%, Ceramic 122016-101 | RAB, RAO | ||
| R22, R23 | Resistor, 150K 0, 5%, 1/8W | 110027-154 | |||
| C40, C58, | Capacitor, 10F, 25V, Electrolytic | 124009-106 | R33, R36, R73 Resistor, 15K Q, 5 | 110027-153, | |
| C76, C82, C90, C4 | R76, R79 | Resistor, 160K Q, 5%, 1/8W | 110027-164 | ||
| C52, 062 | Capacitor, 2200pF, 50V, 10%, Ceramic | 122015-222 | |||
| C51, C61 | Capacitor, 3300pF, SOV, 5%, NFO | 122019-332 | 110001-181 | Resistor, 180 9, 5%, 1/2W | R86 |
| C71, C72 | Capacitor, 3300KF, 25V, Electrolytic | 123003-338 | RI, R3, RS, | Resistor, 1K Q, 5%, 1/8W | 110027-102 |
| C45 | Capacitor, 3900pF, 50V, 10%, Ceramic | 122015-392 | R7, R12, R13, RIT, |
R20, R87-R89, ROS,
| 17 | Capacitor, 39pF, 100V, 5%, Ceramic | 122016-390 | R102, R104, RII | ||
| C42, C44 | Capacitor, 6800pF, SOV, 10%, Ceramic | 122015-682 | R43, RA7, | Resistor, 20K Q, 5%, 1/8W | 110027-203 |
| i | Connector, 11 CKT, Header, | 179118-011 | R54, ROS | ||
| 100 CTR, KEY | 4 | RI9 | Resistor, 220 Q, 5%, 1/8W | 110027-221 | |
| n | Connector, 11 CKT, Header, | 179118-011 | |||
| -100 CTR, KEY 5 | R25 | Resistor, 240 2, 5%, /8W | 110027-241 |
R71Resistor, 27K Q, 5%, 1/8W 110027-273
| a4 | Connector, 12 CKT, Header, | 179213-012 | R74 | Resistor, 2K Q, 5%, 1/8W | 110027-202 |
| 156 CTR, KEY 11 | R57, R66 | Resistor, 3.3K Q, 5%, 1/8W | 110027-332 | ||
| B | Connector, 6 CKT, Header, | 179213-006 | |||
| 156 CTR, KEY 3 | R69,R70 | Resistor, 3.9K Q, 5%, | 1/8W | 110027-392 | |
| CRI,CR2, | Diode, 1N4001 | 131048-001 | R34,R37_——_Resistor, 30K Q, 5%, 1/8W | 110027-303, | |
| CRI2-CRI9 | R77, R80 | Resistor, 330K ©, 5%, 1/8W | 110027-334 |
CR5-CR8_——_Diode, 1N5401 131051-002
| R59, R68, | Resistor, 33K Q, 5%, | 1/8W | 110027-333 |
| CRB | Diode, INS818 | R96, ROB, R99, R101, | |
| CRO | Diode, 1N754A, 6.8V, Zener | 131002-001 | R103, R105, R107, |
CRA, CRIO, R108, R110, RUZ
| Ril | Diode, MV5053, Light-Emitting | 131027-002 | R56, R65 | ——_—Resistor, 39K 2, 5%, 1/8W | 110027-393 |
| HS1,HS2 | Heat Sink, TDA2030 | 178190-032 | R2,R4,RG, | Resistor, 470 Q, 5%, 1/8W |
RS, R10, R11, R21,
| 5C, 5K, 5L | Integrated Circuit, 4066B | 137580-001, | R30, ROO |
6C, 6K, OL
Illustrated Parts Lists Steel Talons
SAIIS PCB Assembly, Continued Parts List
| Description | Designator | PartNo. | Description | Designator | |
| R53, R62 | r, | SAK Q, 5%, BW | 110027-512 | IF 1 | Socket, 28 Pin, 600 |
R27 Resistor, 560 2, 5%, 1/8W
| R82,R84 | Resistor, 6.8K O, 5%, 1/8 | IMIN,IP,IR | Socket, 32 Pin, .600 | 179257-032 |
| R7B,R81_——_Resistor, 620K Q, 5%, 1/8W | 1D | Socket, 40 Pin, .600 | 179257-440 | |
| CCl+, CCL-, | Test Point | 179051-001 |
R32, R35, sw CCR+, CCR-, GND1,
| R55,RO4 | Resistor, 82K Q, 5%, | 1/8W | AGNDI, AGND2 | |
| R198, 199, | Resistor, 100K @, 5%, 1/8W | @B | ‘Transistor, 2N3904 | 133041-001 |
R200, R201
| R202, R203 | QU, Q2,Q4 | Transistor, 2N5306 | 133033-001 | ||
| XI | Crystal, 3.579 MHz | 144007-001 | |||
| 4A | Socket, 16 Pin, .300 | (HSI, 2) | Screw, Pan-Head, 6-32 x 3/8, Zine | 72-16068 | |
| IL, 2P,2L | Socket, 20 Pin, .300 | (HS1,2) | ——-Nut-Washer Assy., 6-32, | Zinc | 177026-1036 |
| 4B1 | Socket, 24 Pin, .600 | (HS1,2) | Compound, Thermal | 107031-001 |
4-26