Venture Technical Manual 1.0
Venture (version 5 set 1) (Exidy, 1981) · Manual · 66 pages · 18 sections · original scan
VENTURE (TM)
Technical Manual 1.0
- 1981 Exidy, Inc. 390 Java Drive, Sunnyvale, California 94086 Telephone: (408) 734-9410 Toll-free: (800) 533-8402 Telex: 357-499
FOREWORD
This manual is designed for your ease in reading schematics. A description accompanies each schematic on the opposite page. This should help clarify the schematics and aid in your understanding of the technical aspects of VENTURE’ "+
The following Table of Contents is an outline of the information contained in the schematic descriptions. To find the particular information you are interested in, look up the schematic PAGE number as listed, and opposite the schematic is additional verbal explanation.
EXIDY VENTURE (TM)
TABLE OF CONTENTS
SCHEMATIC PAGE NUMBER MANUAL PAGE NUMBER
PAGE 1 OF 8: GAME LOGIC PCB ....--00. deca eerreereccececes 1
- Master Oscillator
- Element (Horizontal) Counters
- Line (Vertical) Counters
- Screen RAM Addresses
- Coin Input Decoding
- Hardware Generated Line Positioning Proms
- Blanking and Video Clocking
- Black and White Composite Video Output
PAGE 2 OF 8: GAME LOGIC PCB ceseccccccrecccccccecececscccees 2
- Screen Controller PROM
- Screen RAM
- Character Image Storage
- PROM Power and Signal Selection
- Character Generator Output Shift Register
PAGE 3 OF 8: GAME LOGIC PCB Image Storage RAM ..seseeeeseee 3
- Character Generator Image Storage RAM
PAGE 4 OF 8: GAME LOGIC PCB.csescccececcccccesccccesccesecse 4
- The 6502 Microprocessor
- Power-on Reset circuit
- Processor Workspace RAM
- Main Address Decoding
PAGE 5 OF 8: GAME LOGIC PCB .ssececssccerecccceceeccereveses 5
- Program Memory
- PROM Address Selection
- Memory Device "Personality" Selection
PAGE 6 OF 8: GAME LOGIC PCB .scccccccccrcccrorerncccceereces 6
- Moving Object Horizontal Position
- Moving Object Vertical Position Counters
- "Write Moving Object" Decoding
- Color Interface Output
TABLE OF CONTENTS (continued)
SCHEMATIC PAGE NUMBER MANUAL PAGE NUMBER
PAGE 7 OF 8: GAME LOGIC PCB .cccecccccccnccccccsccsnvccevens 7
- Moving Object Multiplexing
- Moving Objects Image PROM
- Moving Object Video Output Shift Registers
- Moving Objects Shift Register Load Logic
- Moving Object Shift Register Control Logic
- Memory Device Personality Configuration
PAGE 8 OF 8: GAME LOGIC PCB ceceecccecccccccccsssecccceseves 8&
- Interrupt Status Latch
- Option Switch Port
- Control !nputs Port
- Moving Image Latch
- Audio Board Port
- Control Port Latch
- 1/0 Decoding
Figure 1: Memory Map ceccsccscccccccccecccrcccccccsccsseseve F
AUDIO/COLOR PCB GENERAL DESCRIPTION .essececscveccesecevees 10
PAGE 1 OF 5: AUDIO/COLOR PCB. .csecccscccccccsveccscvcescves 11
- Logic and Power Interface
- Communications and Address Decoding
PAGE 2 OF 5: AUDIO/COLOR PCB...cseeseeeece
- 6502 Microprocessor
- Peripheral Interface Adapters
- Address Decoding
- Music Generator
- Master Oscillator
- Program Memory
- Output Filter
PAGE 3 OF 5: AUDIO/COLOR PCB...csecseccecccccccreveveeeceee 13
- Clock Manipulation and Noise Generation Circuit
- Amplitude Modulation Control
- Output Summation and Volume Control
TABLE OF CONTENTS (continued)
SCHEMATIC PAGE NUMBER MANUAL PAGE NUMBER
PAGE 4 OF 5: AUDIO/COLOR PCB cesses eccscccseccccceeescscencse 14
- Summing Amplifier
- Integrator and Audio Power Amplifier
PAGE 5 OF 5: AUDIO/COLOR PCB. .sereceereecerevceece
- Pattern Character Cotor Division
- Priority Encoder
- Color Data Latches
- Color Selection Multiplexers
- Video and Sync Signal Polarity Selection
- Finat Video Output Re-sychronization
PAGE 1 OF 1: MEMORY EXPANSION PCB .occesescesecscevecscccees 16
FIGURES:
Figure 1: Memory Map Figure 2: Joystick 8-Position Assembly Figure 3: 6502 Main Harness Color Figure 4: Control Panel Harness Figure 5: Universal Coin Harness Figure 6: Universal Supply Assembly Harness Figure 7: Auxiliary Coin door harness Schematic Figure 8: Universal Power Suppy Figure 9: Monitor Isolation Transformer Assembly
APPENDIX A: PARTS LIST FOR VENTURE (TM)
PAGE 1 OF 8, GAME LOGIC PCB
- Master Oscillator (1D)
From this oscillator all dynamic operations are derived, such as the processor clock, the main element and line counters, the shift register clocks, as well as all other forms of timing signals.
- Element (Horizontal) Counters (1C, 1E, 2E) _
These components form the final stages of horizontal timing. All operations in this game requiring horizontal positioning or timing have their origin here. Note that, beginning with signal HCLK (from Clock Divide Counter 2D), there are 256 counts prior to setting signal E256 high. When this signal goes high, it indicates that the horizontal blanking period is in progress. At this time the final counter (1E) is preloaded with a higher number than previously loaded. This creates a shorter count the second time around. The shorter count measures the retrace interval. When the retrace count is finished, the counter preloads witha lower number, establishing a longer count sequence again for "real time" sweep of the electron beam across the face of the CRT.
- Line (Vertical) Counters (4F, 5F, 6£)
These components form the entire vertical timing operation starting with a clock derived from horizontal timing. These counters count 256 times and then preload with a higher number, causing a shorter count the second time. This shorter count measures the vertical retrace interval.
- Screen RAM Addresses (7D)
During the time the screen RAM_ is examined by the logic for output to the monitor screen, addresses must be applied to the screen RAM to count up at a rate corresponding to the image cells conceptually arranged on the screen in a 32 x 32 matrix. The counts used here, 4 from the element counters, and 4 from the line counters, fulfill this timing requirement. The least significant element count used (E8) represents an interval exactly eight times that of one element. The least significant line count used represents an interval exactly eight times that of one horizontal line, or eight times a single line count. Dividing a 256 element line by 8 yields 32, and likewise dividing a 256 line vertical sweep by 8 yields 32. Thus the screen RAM address lines (RAMO through RAM9) count at a rate that creates 32 horizontal counts and 32 vertical counts as the electron beam sweeps the face of the CRT. This makes 1024 conceptual "image cells" into which can then be inserted images of 8 elements by 8 linese For more information concerning these images, refer to the text for pages 2 and 3 of the Logic Schematics.
- Coin Input Decoding (1H)
Some models of VENTURE (TM) contain two separate coin inputs for special coinage applications. NOR gate 1H combines these separate inputs, making signal 5COINT, which sets the interrupt flip-flop (6E on page 8) when either coin input becomes active, thus forcing the microprocessor to jump to the interrupt service routine. This interrupt driven operation prevents ever missing a coin when inserted. However, this also means that when a game is first powered up, the coin input must be inactive. If for some reason the coin input switch is enabled at the time of power up, the game does not properly initialize until the switch is disabled.
- Hardware Generated Line Positioning Proms (GE, 4E) These PROMs are not used for VENTURE (T™).
- Blanking and Video Clocking (5H)
Flip-flop 5H merely combines blanking and all other video.
- Black and White Composite Video Output (1H)
This circuit is not used for VENTURE (TM). If desired, however, these components may be installed to aid troubleshooting, by acting as a "video probe’.
PAGE 2 OF 8, GAME LOGIC PCB
- Screen Controller PROM (6D)
This PROM controls the direction of data flow into and out of the screen RAM and character generator RAM. It prevents timing errors and buss conflicts, assuring that the microprocessor can write to either the screen or character generator RAM, or read back from either.
- Screen RAM (7B, 8B)
The screen RAM is comprised of two 1024 x 4 static RAMs, configured to act as a single 1024 x 8 RAM. This creates a screen matrix of 32 horizontal by 32 vertical positions. A single byte code is stored in each of these positions to represent a particular character. During “real time" (the time the CRT is being swept by the electron beam) these character codes address the character generator RAM.
These character codes, when used as addresses, are combined with the three least significant line counts (L1, L2, L4) to present to the character generator output shift register all the necessary data to form an 8 element wide by 8 line high character on the CRT, located within one of the 1024 positions mentioned immediately above; that is, the 32 horizontal by 32 vertical positions.
The screen, then, is a storage place for single byte codes that call up an 8 x 8 character and place it into the corresponding character cell. This character is stored in the character generator RAM, shown on page 3 of the schematic.
- Character Image Storage
Shown on this page are two PROMs (9C, 10C). They could be used as a permanent set of characters. However, VENTURE (TM) uses RAM instead, to increase the flexibility in character manipulation. This portion of RAM appears on page 3 of the Logic schematics.
- PROM Power and Signal Selection (10B)
This Dip Shunt configures the logic for different types of PROM devices. For VENTURE (TM), however, this Dip Shunt is unnecessary due to the fact that RAM has been used rather than PROM.
- Character Generator Output Shift Register (12B)
Video from the character generator memory devices (RAM in the case of VENTURE (TM)) is formed by this shift register as a byte of data that displays one line at a time from left to right on the CRT. This ultimately forms an 8 line high by 8 element wide character positioned on the screen according to the time it is presented to the shift register.
Output from this shift register are all the images seen on the screen except the player image and the player missile image.
PAGE 3 OF 8, GAME LOGIC PCB
Image Storage RAM
- Character Generator Image Storage RAM (13C, 11C, 14C, 12C)
These four RAMs, when used in this configuration, act as a 2048 x 8 bit RAM. The images placed on the screen are stored in this RAM by the microprocessor, according to the game program. In this RAM images are established, altered, shifted slightly, and even replacedwith a new set, if required by the program. When called by the logic to do so, the RAM presents, to the character generator shift register, a single byte, representing one line of a particular image. Each image is composed of 8 lines of data, each line is one byte-wide. Thus, 256 images of 8 x 8 bits can be stored here simultaneously and ‘called up" by the screen RAM to be disp!ayed on the CRT in any of the 1024 character cell positions. A single byte code, stored in the screen RAM, calls up a_ character. The character may change or move by replacing the single byte code in the screen RAM, or by altering the data in the character generator RAM which forms the image.
PAGE 4 OF 8, GAME LOGIC PCB
- The 6502 Microprocessor (2A)
For detailed information concerning this microprocessor, refer to the MOSTEK publication, 6500-10A, MCS Microcomputer Family Hardware Manual.
One feature that should be mentioned here, however, is that this micro- Processor has ‘memory-mapped 1/0". This means that all ports interfacing to peripherals of any type must be located within the normal memory map, with no duplication of addresses, since no instructions are specifically oriented toward |/O operations.
- Power-on Reset circuit (connected to 2A pin 40)
When power is first applied to a game, a particular sequence of events must occur to set up all logic conditions. If this sequence is broken for whatever reason, the microprocessor may become confused, and the game will not start and run.
This sequence is accomplished when the reset line to the microprocessor is the last line allowed to reach a "high" logic level. The Power-on reset circuit makes sure this occurs by utilizing the charge time of an RC network as a delay.
If any kind of power interruption occurs during normal game play, the power-on reset circuit insures that the microprocessor is reset. This alleviates confusing the microprocessor, while it also recreates the original power-on sequence.
- Processor Workspace RAM (4A, 5A)
The RAM, or workspace, consists of the lowest 1024 bytes of memory and can be divided into three separate sections due to distinctly different functions.
The lowest 256 bytes (0 to FF Hexadecimal) is reserved for special software register operations, and is called "zero page". The processor uses this area to store dynamic variables. For details of this type of operation, refer to 6502 technical literature regarding “Zero Page Addressing".
The next higher 256 bytes (100 to 1FF Hex) is reserved for the 6502 stack. The processor stores return addresses in the stack when interrupted or called to execute a subroutine. The game program may also request the processor to store other kinds of information here for later retrieval.
The next higher 512 bytes (200 to 3FF Hex) are used as a scratchpad = area. Miscellaneous calculations and their results are temporarily stored here.
- Main Address Decoding (5C, 5D, 5E)
This circuit is the first stage of the address line decoding necessary to organize the memory map; that is, it places specific functions or devices within generalized blocks of the memory map, grouped by function.
For details on the addressing scheme, see MEMORY MAP, Figure 1.
PAGE 5 OF 8, GAME LOGIC PCB
- Program Memory (6A through 13A)
These memory devices may be 2516, 2716 (5 volt only), or 2732 EPROMS. if 2516 or 2716 EPROMS are used, there will also be an additional memory expansion PCB in use to create more memory space. This PCB is simply an extension of the address, data and control lines present at the memory devices situated on the logic PCB.
- PROM Address Selection (4B, 5B)
This is a second stage of address decoding, used to select each individual memory device when addressed. Signal ROMSEL (from page 4 Main Address Decoding) selects the Program Memory devices in general, and jumper 48, together with decoder 5B further defines an address to a particular memory device.
- Memory Device ‘Personality’ Selection (11B)
The dip shunt, or jumpers block, alters control signal configuration to the Programmemory devices. This allows the use of alternate size EPROMS and/or those created by different manufacturers whose control signal pinouts may not be identical to one another.
PAGE 6 OF 8, GAME LOGIC PCB
- Moving Object Horizontal Position (13F, 15F, 14F, 16F)
Counters 13F and 15F form a byte-wide counter which horizontally positions Moving Object 1 on the screen. These counters are preloaded toa certain value by the microprocessor during Vertical Retrace time. Then, after each occurrence of the Horizontal Sync, they begin to count. The count outputs AND‘'ed through 15E give rise to signal MIHW, the Horizontal Position Window for Moving Object 1. Counters 14F and 16F are the equivalent circuit for Moving Object 2.
- Moving Object Vertical Position Counters (16E, 12E, 1E, 13E)
Counters 16£ and 12E form a byte-wide counter which positions Moving Object 1 vertically on the screen. These counters are preloaded to a certain value by the microprocessor during Vertical Retrace time. Then, after each occurrence of Vertical sync, they begin counting. The four count outputs of the least significant of these two counters (M1L1, M1L2, M1L3, M1L4) are sent to the moving object image PROM to speci fy which line of the image is presently being displayed. The AND'ed outputs of the second counter give rise to signal M1W, the Vertical Position Window for Moving Object 1. Counters 11£ and 13E are the equivalent circuit for Moving Object 2.
- “Write Moving Object" Decoding (6F, 16H, 5E, 3F)
Consists of two distinctly different functions. 6F and 16H form the circuit that generates the load pulses for the moving object position counters, while 5E and 3F simply prevent the counters from counting during blanking.
- Color Interface Output (16B)
This is a 14 pin DIP socket used as the connector interface to the color selection circuitry, located on the audio PCB. The signals and their functions are listed below:
Pin #
1 5SRLOAD 2 CBLB 3 CSYNC 4 5CVID 5 5SCLK 6 HSYNC 7 GND 8 VSYNC 9 5MO2VID = 10 5MO1VID = 11 VA9 12 5LINES 13 VD7A10 +5V = Shift Register Load Pulse (Neg. True) = Composite Blanking = Composite Sync = Composite Video (Neg. True) Shift Register Clock (Neg. True) = Horizontal Sync
= Vertical Sync Moving Object 2 Video (Neg. True) Moving Object 1 Video (Neg. True) Character Generator Address Line 9 = NOT USED ON VENTURE = Character Generator Address Line 10
PAGE 7 OF 8, GAME LOGIC PCB
- Moving Object Multiplexing (144A, 14E)
These two multiplexers pass information to the moving objects image PROM. They contain two codes: one determines which image should appear, and the other specifies which line of that image is to be displayed.
The data passed alternates between data for Moving Object 1 and Moving Object 2, depending on the state of element count E32.
The upper multiplexer (14A) passes the "which image" code, and the lower multiplexer (14E) passes the ‘which line of that image" code.
- Moving Objects Image PROM (11D)
This EPROM accepts as an address the image and line codes of moving objects 1 and 2 (see "Moving Object Multiplexing" above). It then presents the appro~ priate data for one line of the image to the output shift registers.
The timing of the logic insures that the correct pair of shift registers are loaded with the data, then shifted out at the correct time to become, one line at a time, the 16 lines of video for that character (Moving Object 1 or 2).
- Moving Object Video Output Shift Registers (12D, 13D, 14D, 15D)
Shift registers 12D and 13D together form a 16 bit shift register whose task is to accept, as data, 16 bits (2 bytes) representing a single line of the image for Moving Object 1, then shift these 16 parallel bits out serially to become video. This operation is repeated for 16 consecutive lines, resulting in a video image that is 16 bits wide by 16 lines high on the monitor screen. Shift registers 14D and 15D together form this same type of circuit, identical in function, for Moving Object 2.
- Moving Objects Shift Register Load Logic (2F, 16H)
This circuit sends properly timed load signals to the Moving Object Video Shift Registers. These load signals are needed to load the image data into the shift registers at locations 12D, 13D, 14D, and 15D.
- Moving Object Shift Register Control Logic (15H, 14H)
The input signals to the upper two gates (15H) represent horizontal and vertical position ‘windows" for the two moving objects (for example, MIHW = Moving Object 1 Horizontal! Window, M2W = Moving Object 2 Vertical Window). These windows allow the Moving Object shift registers to shift only at the right time. This insures the image is generated at the correct position on the screen.
The lower 2 gates of 15H are, in VENTURE, used for later decoding in the color selection circuitry, located on the audio PCB.
- Memory Device
figuration (10D)
Personality Con-
This is another Dip Shunt which reconfigures the PC board in order to use an EPROM (11D) of another type or manufacturer.
PAGE 8 OF 8, GAME LOGIC PCB
- Interrupt Status Latch (8E)
This fatch is set when a coin is dropped or vertical sync occurs. When the latch is set, the CPUis interrupted; that is, signal FRQ goes low. This forces the CPU to jump to the interrupt service routine. The interrupt service routine instructs the CPU to check for a coin input, and then run a debounce routine on the coin bits of ports 9E or 15A, depending on which coin input bit was set at 8E.
If the CPU finds no coin input bit set at latch 8E, it will assume the Interrupt condition was caused by vertical sync. This tells the CPU that it should now jump to the routine that services the norma! game play, and that the screen can now be updated with new data. The screen can only be updated during the vertical retrace interval.
Also on this latch is the signa! named
TABLE. This signal, tied to a pul lup
resistor and switch, determines whether the program operates as a table model or in the upright game configuration. Please check with the Exidy Marketing Department and the Operator's Manual for more details, since table models may or may not be available.
- Option Switch Port (15A)
This port provides input fromthe option dipswitch, at location 16A. Data from the dipswitch is gated onto the data buss and read by the CPU at game start. This allows such options as number of turns, coins per game, additional game versus extra turn, etc.
- Control Inputs Port (9E)
This port provides input from the controls located on the control panel, such as the joystick, fire button, one player start, and two player start. Data from these controls are gated onto the data buss for examination by the CPU during the regular service routine (which is synchronized to the vertical interval).
4, Moving Image Latch Only the CPU can write to the moving image latch. This latch contains the code that specifies which image or images are presently being displayed by the hardware moving object circuitry.
- Audio Board Port
This latch is written to and read by the CPU, and transmits instructions to the audio board when any sounds are enabled, disabled, or the game is initialized. In addition, this port passes data sent to select colors for screen images. For the functions of these instructions, see the audio board schematic and/or description of operation.
- Control Port Latch (9D)
This fatch, used only in table versions, is written to only by the CPU and keeps track of which player is "up", inorder to select which controls are active, that is, player one or player twos
- 1/0 Decoding (7E) The upper half of this decoder generates the chip selects for those I/O devices written to by the CPU, and the lower half generates the chip selects for those 1/0 devices which are read by the CPU. See the detailed memory map for more precise information.
Figure 1: MEMORY MAP
Hex Address Function or Device
FRFA-FFFF Interrupt and Reset Vectors 8000-FFF9 Program memory space 52XX Audio board communications 5103 Interrupt Condition Latch (read) 5101 Control Inputs Port (read) 5101 Output Control Latch (write) (Not used in VENTURE (TM) upright) 5100 Moving Objects Image Latch (write) 5100 Option Dipswitch Port (read) 50CO Moving Object 2 Vertical Position Latch (write) 5080 Moving Object 2 Horizontal Position Latch (write) 5040 Moving Object 1 Vertical Position Latch (write) 5000 Moving Object 1 Horizontal Position Latch (write) 4800-4F FF Character Generator RAM 4000-43F F Screen RAM 0200-03F F Scratchpad RAM 0100-O1F F Stack RAM 0000-00F F Zero Page RAM
AUDIO/COLOR PCB-GENERAL DESCRIPTION
The Audio/Color PCB is so named because it contains not only the circuitry required to generate a!l sounds, but also the color selection decoding circuitry and video output connector.
This PCB contains a dedicated 6502 microprocessor and circuitry to support the simultaneous generation of many types of sound, including three channel music. The Logic PCB simply sends commands to the Audio/Color PCB via a bi~ directional communications port and the Audio/Color PCB takes it fromthere. In some cases this PCB even aids the Logic PCB in some of it's calculations when there is not enough processing time available on the Logic PCB. As a result of this structure, the actual program to generate sounds or music resides on the Audio/Color PCB. There is also a handshake required between the two PCB's in order for the system to power up correctly, and of course, there is no video output without the Audio/Color PCB connected.
PAGE 1 OF 5, AUDIO/COLOR PCB
- Logic and Power Interface (P5,J2,J3)
- Communications and Address Decoding
Connector P5 provides the audio/color PCB with all the power it requires to operate. Also fed through this connector are the two speaker output leads. P5 interfaces only to the power supply module and the speaker, through the main harness.
Connectors J2 and J3 are the most significant path of conmunication between the Logic and Audio/Color PCB's. Address lines, Bi-directional Data lines, processor control lines, and the Audio/Cofor PCB Select line are ail passed through these two connectors. (9B, 13D)
Peripheral Interface Adapter (PIA) 9B, in concert with 8B (another PIA ,shown on page two) serves as a bi-directional communications path between the Logic PCB and the Audio/Color PCB. During information transfer between the two PCB's, both PIA's are in uses information from the Logic PCB microprocessor passes through the PlAat 9B to the PIA at 8B, then to the microprocessor on the Audio/Color PCB. When information is passed the other direction, the path is the same, but the direction is reversed.
During the time that no information transfer is occurring between the two PCB's, both microprocessors can continue to operate independently.
Also shown on page one is 13D, a 3-line to 8-line decoder, used to generate the write signals for the Color Data Latches. These Latches will be covered in the text for page five of the Audio/Color PCB.
PAGE 2 OF 5: AUDIO/COLOR PCB
- 6502 Microprocessor (3B)
This microprocessor is the same as that used on the Logic PCB, but is exclusively dedicated to the generation of sound. It can communicate with the Logic PCB microprocessor, and receives it's instructions thereby. Once it has received it's instructions, however, it asserts complete control over all Audio/Color PCB circuitry and ignores the Logic PCB microprocessor until such time as it is informed that another command is ready. Some conmands are of a type that must be processed inmediately, irregardless of other operations in progress, and some commands can wait until the operations in progress are completed. The program on the Audio/- Color PCB handles all these eventu~ alities appropriately.
Interface Adapters (8B,
- Peripheral 7B)
The PIA at 8B, as mentioned in the text for page one, is used in bi-directional communications between the microprocessors on the Logic PCB and the Audio/Color PCB.
The PIA at 7B is used for two fundamental purposes on this PCB. The first, and most
The second use of this device is that of a Programmable interval timer, used for various purposes unique to the specific sounds being generated on this game. The ability of this device to generate interrupts at time out is utilized here.
- Address Decoding (4B)
Keyboard Encoder (4B) is used here to generate the chip selects of all devices located in the memory map of the Audio/Color PCB.
- Music Generator (2B)
Another Progranmable Counter/Timer device is used here to generate music (and sometimes other special effects) in up to three channels (or voices) simultaneously. The music is created by a special software operating system, and all but the counter/timer chip is therefore invisible.
- Master Oscillator (A1,B1)
This oscillator is the source of all timing on the Audio/Color PCB. If this clock stops running, so does everything else on the Audio/Color PCB. It is, however, completely independent of the clock and other timing signals generated by the Master Oscillator located on the Logic PCB.
- Program Memory (3A, 4A,5A, 6A, 7A)
The memory devices used here are 2716 (2048 x 8) EPROMS. The DIP shunt located at 8A is used to reconfigure the control and power supply lines, if necessary, for equivalent devices from different manufacturers, whose pinouts may not be the same.
- Output Filter Latch (1C)
This latch is used simply to switch different output filter capacitors inor out of the circuit to soften or shade the sound, according to program requirements.
PAGE 3 OF 5: AUDIO/COLOR PCB
- Clock Manipulation and Noise Generation Circuit (3D,4D,6D,5E)
The timers inside Programmable Timer Module 3D can be incremented or decremented either internally by the Phase Two clock input, or externally from the "C* inputs (C1,C2,C3). Both options are used by the program. When the counters are being controlled by the Phase Two clock, the "C* inputs have no effect, and the noise generation circuit is therefore inoperative. In order to generate sounds that are classified as noise, or contain some kind of noise within them, the counters are programmed to decrement in accordance with the input on the 'C" inputs. While in this mode, the combination of 6D (Dual "D" Flip-Flop) and 5E (128 Bit Shift Register), are used to "randomize the clock inputs to the Programmable Timer Module (3D). The “randomizer" can be clocked with either the Phase Two clock or counter output Qt.
- Amplitude Modulation Control (2D, 7D, 8D, 9D)
Counter (3D) outputs Q1,Q2, and Q3 are already highly complex sounds, but in order to create much more specialized audio they must be modulated in amplitude. Each channel is separately controllable in amplitude by associated Digital-to-Analog converters comprised of analog multiplexers and a resistive ladder network. Three contro! bits on each multiplexer select a voltage to output, according to which input pin is addressed (since each input pin is tied to a different point, and therefore voltage, in the resistive ladder). The voltage thus selected is applied to one of the two inputs to each segment of 2D (another triple analog switch), The other input is tied to ground. Note that the control bit to each analog switch segment is one of the previously mentioned count outputs (Q1,Q2,Q3). In this manner, each output can be controlled for frequency and amplitude individually.
- Output Summation and Special Effects Volume Control (2£)
The three segments of Operational Amplifier 2— are configured as voltage followers (for impedance considerations), and their outputs are summed together at the top of a 10K POT, R31. The output volume, therefore is determined by the voltage applied at each input and the adjustment of the POT. Note that the resistors used to sum these three outputs together are large in value, so that each channel will have minimal effect on the others when conflicting signals arrive simultaneously (except, of course, that their sum will appear at the output)
This summed output is then again summed with all other sounds generated by this PCB at the input to the final Power Amplifier.
PAGE 4 OF 5: AUDIO/COLOR PCB
- Summing Amplifier and Master Volume Control (3F, R46)
One segment of Operational Amplifier 3F is used here as a point at which all the various sounds generated on this PCB are brought together. Note that the output goes immediately to a 10K POT (R46) which has ground on the other end. The wiper, therefore, varies the final output volume of all sounds together.
- Integrator and Audio Power Amplifier (3F,10F)
Another segment of Operational Amplifier 3F is used here as an integrator; that is, it is used to ‘roll off" the higher frequency sounds in order to prevent the power amplifier from going into unwanted oscillation. The Audio Power Amplifier (10F) is a Dual Audio Amplifier IC configured as a "Bridge Amplifier" and may be either a LM377 or M378 for Revision A, Audio/Color PCB. Revision letters are locted at position 11C. In later versions of Venture it may possibly use a LM379 with a reconfigured DIP shunt. Information regarding this is available in the operators manual for this game, or contact the Exidy Customer Service Depart ment for assistance if you must use an alternate device.
Volume Controls
Master Volume R46, see the fourth page of Audio/Color PCB schematics.
Music Volume R9, see the fourth page of Audio/Color PCB schematics.
Special Effects Volume R3, see the fourth page of Audio/Color PCB schematics.
PAGE 5 OF 5, AUDIO/COLOR PCB
- Pattern Character Color Division Color Selection Multiplexers (11B, (10A, 9A)
The two segments of Flip-Flop 10A, using the upper two address lines from the character generator circuit, divide the character generator RAM space into four (4) conceptual groups (or quadrants) according to address. This is done in order to assign different colors to different characters.
Using this method, any character stored in a particular quadrant will be the same color as any other character stored in that same quadrant. If the same character is stored in adifferent quadrant, it will be displayed with a different color. The output of 9A (Twoline to Four-line decoder) applies the separated video lines of these quadrants to priority encoder 10B, whose task is to determine which image is to take visual preference when two or more coincide on the TV screen; that is, which image is to appear to be in the "foreground", and which is to appear to be in the "background".
- Priority Encoder (10B)
All the video signals generated by the logic PCB are applied to the priority encoder. The signals assigned the higher priority are shown at the top, and the lower priority are shown on the bottom. The output of this device is a3 Bit code representing the highest Priority video line active at that instant. This output code is then sent to the color multiplexers as an address which will select the appropriate color for the imagery generated on that video line. Note that the lowest priority input to the encoder is tied permanently low (active). This insures that when no other video is being generated, there is a background color present, unless of course, the program has selected a background color of black at that time.
- Color Data Latches (11C,12C,13C)
These latches are addressed directly by the Logic PCB microprocessor. Here the microprocessor stores the data that determines which character is what color. This data is then passed to the color selection multiplexers. 4. 128,
Each of the three multiplexers controls the video output toa different color gun in the CRT. One turns the red gun on or off, one turns the green gun on or off, and the third does the same for the blue gun. The output combination of the three multiplexers provides for one of eight possible colors to be displayed at any given instant. The color displayed is determined by two things: what type of video is present (e.g. which character), and what color the microprocessor has currently assigned to that type of video. As mentioned above, the color assignations are stored in the color data latches. The priority encoder (10B) issues the code representing the type of video currently displayed. Using these two pieces of information, the multiplexers look at the appropriate bits in the color latches and send the data directly to the TV to turn the color guns on or off.
- Video and Sync Selection (TTA, 127A) Before being reclocked one last time, all video outputs are passed through an Exclusive-Or gate (11A), so that one input of each segment can be used to invert the video (make it 180 degrees out of phase with respect to the input to the gate). This feature insures compatibility with TVmonitors made by several different manufacturers. Signal Polarity
The TV Sync signals are also routed through Exclusive-Or gate segments (12A) for the same purpose.
- Final Video Output Re-synchronization (T3A)”~
To insure that all video signals and sync signals are accurately synchronized in time, they are all re-clocked one last time together by a HEX "D'Flip-Flop. (It "cleans up" any spurious irregularities or propagation delays that may have crept into any of the video or sync signals.
PAGE 1 OF 1: MEMORY EXPANSION PCB
For information on the Memory Expansion PCB, refer to PAGE 5 OF 8, GAME LOGIC PCB. See section 1. Program Memory (6A through 13A)
REVISIONS.
| Zone | oR | DESCRIPTION | ‘Dare _[ APPROVED. | |
| 7 | ——a | E | o-n-61] KY |
Clock DWIDE HARDWARE GEVERATED
| —r | ———— | LINE POSITIONING | |
| MASTER OSCILLATOR | PROMS | CON INPUT DECODING | | pupz |
| count | E | D |
[sez $s! 3 SLNES Le4 14] 512x4 |g 2lisos
| 970, | YO | “ is| PROM [7 |
6306 ae. q
| Heals | aie | 3 | . | ||
| 1D oy | aa | usu \% SEVD. | |||
| | WW ia le | Dot «40 | £128 3! por | | | GHOLE: | Ea |
| 4 oF 5 sep | £64 _4\ USED | a | |||
| ———— | ore | fa | ey De. | ar | |
| | | CLK | 6b | € | #4 ps4, \8 ___S.cvip | |
| Y | eg __5| | vouv | if | -— |
+—__ £8.
| s|ugp2 pt ———ssteu | was | VIDEO SUMMING |
5C6vID — BLK SMOWDT SMOaVOT
| r | 1 | earre al | | | aI | ||
| ELEMENT CHori2 ONTAL) CounTreR s | | 164 I apee la 4 | 18) Shia erste | BLANKING # VIDEO | |||
| ~ | 432 15 " Te | } | 17) 748374 [V6 GHSLE | SDCBLB | CLOCKING | |
| 6306 | =| | F | hoT USED | |||
| ue 1) GEE ly | 4 | 14 | f | SHDLE | ||
| 56256 | “ipa | B | 4 | 131 | Pars | Cc |
| fue, | Ease | £28 3) vor | sease 3 | a 6605. | ||
| * | £64 4| USED | SCBLB 4. | S 6c BR | |||
| ob hy le le | £3a_2| | vet | | og 2Ve4 |
a |1__susyae
| Lf | susie, AY | Meausiie| | igh ves | _£6_6| | usync 8 | 2 | |
| ie | "é" | We | $00} Yo'se | Gee | vcywe | _£8_5) | igo thay |
| c @ | Le , | ek | —HSYNE | su26 I | Lee | Pe | |
| OTE ra | — | v _ | LOSE | 4g98 | ||||
| POP | . | — | |||||
| : | aie! | SCREEN RAM ADDRESSES | secur | ||||
| + | —— | le | |||||
| € 108 | bid a Ls | RAY | |||||
| cea | l6 | Ran | |||||
| _ | £3: | a | 4 | 2M, | |||
| EA | a | RAM! | love fue | NOT USED | ||||
| 8 | Is | RANO | BLACK ¢ WHITE | ||||
| le | ry | pvp | Bak | COMPOSITE | |||
| LINE (VERTICAL) CouNTERS | 2 | eae | a | | VIDEO OUT PUT | | |||
| mpers| | | _ | Rawr | 5 |
ae 1744 ig a6 eseo_, 'T "| + WDEO
| is. | SESBD | 26 | ||||
| v | a | tet | ne | ot | [a7] | Mri |
€
| pupa | 7 | a | 2 | £256 | a | lia. | Rang | ET |
| \P | RY ——#)P | W. | ||||||
| YL S/6) | THSIO/ | 79 LSI1 | THSAMI | S | ||||
| wise | nas | wl, 75S | Cee | 1 S04 lig rans | ||||
| -tt ___#i ry1sa0) | cox | ik ale | £ | |||||
| £i6___1—} | CR A | 4 7 | 5 | _ | [ |
y
| a | + | —! | 3\op sce —9 22 | pe | mea |
Te Ae
| venTe | . | slope | ES8D_* | H | Crt Mis | are | |
| 4 | 4/38 | ‘Seant 1} | ‘geome | em J J 038 | eT pe | ||
| eh | + | = | scan2 13] 7S24{|7 6 COINZ | ||||
| £32 | | | i | _| | ||||
| | | 4H | ay] cope | Pa OR | NOMENCLATURE | r | ||
| 16. | eo] Gent | wenn no. | Oe DESCRIPTION | |||||
| 12 | af | a | L_26 | PARTS UST | |||
| 7 | mt | FE | |||||
| i | Wl op >0!2 L198 | 3) 4s0a Yo vse | JFRACTIONS DECIMALS ANGLES | ||||
| ub | F | oH | es | xe F | ‘APPROVALS | ote | 6502 GAME LOGIC PCB | A |
area RN 16-12-81 forecxes
- SYNE AND VIDEO GENERATION SIRE [ OOBE DENT NO. JORAWING NO. D 77-3374-|| RVE Nigh
NEXT ASSY Use ‘APPLICATION 1DO_NOT SCALE_DRAWING
| oman 5 | 7 | 6 OS | 5 | ; | 4 | 3 | 2 | 1 |
sneer | oF
SCREEN CHIP DIRECTION DECODING PROM SELECT and BUSS
H cy Hl
NOT USED THIS GAME 2? a Bhis De 7
| Igo 4 9 CSSR | DS | 16 | ||
| VSEL_13} 7 CSG! | oa | 5 | ||
| an 12] 6331 |e cscee | i 5/2 £CGBD | D3 | seas [4 | im |
| VD7AI0 u Pee 5S _SESBD | 4D | bz | 3B) [13 | |
| RW 10o|“cp [4 S5ecGBD 220 | o | te | ||
| _ |B DBDIR RSI | 0300. | Do | u | |
| A pee | 330 | 7 | _ | |
| is | 25" jo swe | fF SCREEN RAWG) | 5ECGEO — | ||
| g 6D-l [TESBD cipie 1500) i GSWR | (ine, CODE STORAGE) | DBDIR, OR, |
3D o=— vo7A10 —1
| ag 2p Y]18 | RAMA 15 | " | 1B ia { | vas 22 | |||||
| ae 4| rome | RAM B16 |** [et | 7 ie tJ | VAB 23] prom [12 f | vo? \4 | ‘3 fio" SCGVID | ||||
| ra] Ce 4 + | RAM 7 | iz | 14 15 J | VA? i | we TT | VD6 12 | ‘1 | ||
| Re Fy 2 a | RAMG 1 | + t . | 31 gag [2 ‘ | VAG 2] | 15 t | VDS Ti | |||
| AS Feszar [3 | . | RAM 5 z | aye (2 | 4 | VAS 3 | 4 L | vo4 10 | ||
| Aa 5] cB [5 | . | ae | 4 | 5 | q | VAS, 4 | 13 | t vos 3 vsiee | CHARACTER |
| AS 3 7 | . RAMS 4| Tae | 7 | a | t wah S|, | + | Tee | GENERATOR | ||
| Az u EJ | t RAM2 5. | 2 | q ; vA 6 | 10 | 4 | vor 3 | VIDEO OUTPUT | |||
| 5ESBD 1 | RAM @ | VAI 7 | 2 | } voo | SHIFT REGISTER | ||||
| tap Tie | RAMO 7 |, 4 | VAO a | er |
Soo] faeces ao ssrco [1s 27
| cesar [40 | cscGi_ 18] | s/C |
| GSwR io | 4 | sca.s | 3] |
| BSW Ri, | , | dere |
| Lt 2fa 18 | vrpel__2i| NoT useD | G |
« eSerz
| AL n [za era | iz 4 | 16 | vree0 20 | sscuK 7 |o i, | |||
| ho i | 5 | * | ul @ |iseai [14 | Tt vera a | |||
| is241 | 4 | ia! | 7 | a8 | ad | See Page 3 | Vv |
| YA: | a | + | a | ||||
| 16 | 12 | 4 | 6 | ||||
| ESD ig | 7 | 1B | |||||
| SESS | 1 | ‘4 | 1 | ze | a |
- .
| é | ey | le | |||
| 3] | AIO 2fia his La | A PROM [5 | |||
| 24 | AS 4 | 16 + | |||
| S) 88 | AB @ | 14 | . | S | is |
| 5 | 3 | 3 | |||
| a | aa 8] | 4 | u | ||
| = | Ret? | tseai [3 | + | S | io |
ac
| casr a (“0 | as IS. | A | ’ | @ | 3 |
| = des | ha B | 7 | soc | ||
| Gane 10 | y | 2 | |||
| w | AS nu | a | Ls | ry |
seca 1] = qsoce 8 J
| 07 2A Blis | ECOBD 1S | 65 | ~~ | |
| de 3 | 7 | vepazr ai] NT OED | |
| Bs 4 | ie | _——_ | VRP20_20) |
| ry 5 | 15 | ae Mea eth | vRPIS 13 |
| Da @ |is24s [14 | x 3 > | See Page 3 |
ec B/isza1
| D2 7 | 13 | 3B | ||
| Es & | ie | 7 Eccao 19 | CHARACTER IMAGE | |
| Dd Ey | 1 | perme acne Enel | = | | |
| 5eseo 8 | aR | a | STORAGE i |
DapRe 4" See Page 3 for
- oR Alteruate: RAM used
| carey | i = j 1G ¥RPEI 1 | For PRAGRAM gesera | |
| = | oo) | ' | choageable imagery. |
| PROM | , seo 5 | ; | chorgealle gery |
Power € SIGNAL _ wes \4 ' SELECTION > : a6 IavRP20 | NO SHUNT 7 AOS z
| USED THis GAME | i | MNBL |
He 10 6502 GAMELOGIC PCB
za on GAE-BT = VIDEQ RAM CHARACTER GENERATOR AND SHIFT REGISTER 20F8 Teagan a
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
PROGRAM MEMORY
| ag 22 | ng Lz RD7. as ez | fa RD7 as, 22 | RD? Aa 22 pL RD? |
| 48 23 laa ve lle RDS ae 23 | We RDG AB 23 | RDG a 23 oa ROG |
AT Laz ps LS RDS Az L DS ‘iS RDS: AT 1 ROS AD \ bs iS ROS Ao ate palit RD4 AG 2 pal lt RO4 AG @ RO4 Ao 2 palit RD4 AS. 3k pst RD3 AS 3 pat RDS aS E} RDS AS 3 pal RDS. Ad at pall! RD2 aa 4 hhe bolt RD2 Ra * RDZ aa 4 pol ROZ
| rey si is | AS, She pile RDI a3 5 | ROI AS Ss ey ROY | ||
| AZ G a2 Dal 3 RDO Ae & a2 pol? ROO | G | RDO Aa G pol 2 RDO | ||
| Al ? lat | AL 7 ls | 7 | AL 7 | |
| a0. Sao | RO Bao | A | AO a | |
| I3A | 124 | JOA | ||
| PCsO 8 dena. | Pes! Bena | Pes 18d ea, | ecs3 18. | DATA BUss |
| 4 | "| | 4 | 4 | TERMINATION |
| PAP 212i | PAP 212) | PAP 2121 | PAP 2\ 2h | ' |
| PAP 20 20 | PAP20 20 | PAP 20 | PAP 2020 | ging Suppression |
| PAPIa 13 | PAPI 19) | FAPIO_13) | PAP 1319 |
a Ld
4.7K 31°
| AD 22 | 2 RD? AS 22 | 2 RO? AS 22 | 1? RD? AS 22 | 7 RD? | = |
AS 23 we = Ie RD AB 23 aa had Ie RDG AB @3 3 2 \e RDO AB 23 ae B? Ie RDG 7 1 bag aa ‘Ss. ROS AT I Ke faa Ss RDS A? \ ae Pe is ROS A? 1 as be 15 ROS i zi. Pha RD4 Re ms eaIcs RD4 ae aa Ona RD4 Re 2 |" Ostia RD4
| ne D4 | lo 4 | Ae o4 | Ae D4 |
AS 3 As. D3 \3 RDS AS 3 As b3 13 RDS AS 3 AS D3 13 RDS AS 3 5 pal 3 RDS Ba ana pal! Roe rv ale bell! ROE aa 4 Ine ool RD2 Aa aie oe RZ AR s re DI 10. ROI AZ EY Ins, DI 10 RDI AR EJ re Dt 10 RDI AR 5 3 DI 10 ROV AZ o ne. 3 RDO Aa oe Az bol 3 ROO ae G a2. Do ES RDO AZ eo lac. bol I) RDO
| al 7Tay | Al Ta | al an | Al ahh | |
| 40 8lno | AD. lao | AO Blho | FS) ENS | eek sae |
| 9A | BA | TA | oA | res |
| PCS4 1B ENA | PCsS 1B ENA | PCse i END | PCS7 18 ENA | |
| PAP 21 2t | paral at | PAP 2 ai | PAP 212i | |
| PAP 2020 | PAP 20 20 | FAP 20 20 | Pap 20 20 | |
| PAPI9_13 | PAP Ia 19 | PAP Ia 19 | PAP 1913 |
L {____
4B ANB \ \e 2° Sst os 30 Oa] Reo Oat A BS OOF J ale @ u curs all 7 10 Ai ae ai Romsel |}
PROM ADDRESS SELECTION MEMORY DEVICE PERSONALITY SELECTION EXIDY INC.
6502 GAME LOGIC PCB | CPU ROM S0FB RAMI +
MOVING OBJECT 1 HORZ, COUNTERS MOVING OBJECT 2) HORZ. COUNTERS
* De. . = +
| O83 | . | t |
dz + Dy + Do +
Swed swmen
| PREA BOD IS | PUPS 4 PRE ABCD y/!3 | Afra a Be DVS | ||||||
| Taugigs YP | T4LS193 | 7418193 | ||||||
| EN | Isr | he | MHCLK Ss | iar | he | sl, | Nor | 12 |
| cLR ABCD | ar ABeD | CLR ABCD | ||||||
| 1# [3/2 ]e]7 1 | 1 [3]2]6[7 mens | 14 [3]2]e]7 13 |
g{ise\)4 tow 2h say
| v | ots | 2 |
MOVING OBJECT 4 MOVING OBJECT 2 VERTICAL COUNTERS VERTICAL. COUNTERS
or . de ;
bs > ba + oS + be + a Fy) if + SWMIV sway Ti fists fils
| PuP 4 | Pur 4 | [PRE ABCD his | ||||
| — | 74L8193 | 74.8193 | ||||
| cBLB | cBLB | s|, Ne | Az | 5, | 13E | 2 |
CLR A BCD clr ABCD
| J 3]2]e]7, | 2 | 14 [3]e[a]7 | |
| — | Ain | v | 3 |
| mivw | if | 10 |
use! 1 hisai Le melt 13 mee ‘| M2Lt
MISEL i}
| ——$— | nw | 10 | Pur 3 | |
| io JLS32 = ics IG 3 2 | SWINEN: | |O4, | - | |
| oF | vaisisa 10 | SWM2H | aa | eB |
SR yee fs
| AT | ra] tek Po | ‘Swiniv | cze | ese |
| Reo | 4 | 12 | SW |
4I,
[SE \6 N02 MCL LSOB BF
[waite MOVING OBJECT’ DECODING 1SE
Ey
1aF m2RW
mevw SSRLCAD
CeLB 2 CSYNI 3 7 4
| - | 4B | VIDEO |
| SCL | S| ig PIN | ouTruT |
| MSYNG. | e| ‘ae | To |
3] socker $ VSYNC. —Smozvip 4 | smoiyip so VAG S LINES 12
vD7AIO 415 | a
wo
res
6502 GAME LOGIC PCB Avvig/eotor PCB
a eae 6-12-81 eo EB | COR INTERFA OT PUT AND MOVING OBJECT POSITION COUNTERS
Gorse 77-3374-11
| fnovine oBsects| | mowing OBTECTS | Movin OBTECT 4 | movING oBTEcT 2 |
| MUTI PLEX! | IMAGE ST¢ | VIDEO OuTPUT | VIDEO ouTPUT |
EGISTER SHIET REGISTER
MRIG
| mere 13/7409'57 hie | 22 | kd | MYDS | 14 | | MVD: It |
es 2 3 avid
| mera 10 | 3 | 23) aig Le | MV O07 | 2 cago MIMD | mvs | ratsicol! |
| a | 1 | S | MVDG | i | MvoG | |
| MERE. | yo | EPROM | moe | |||
| meri ale Te | i | 2 | 14 | MYDS | 10 | |
| mee ale | 3 | 1 | MV D4 | 5 | vba | |
| mea |e | Ele 4 | n | MVOS | 2 | Mwos | |
| measles | 3] HD fo | myo | 3 | mvoz | ||
| pa | | | 2 | VDI | |||
| mgr ete | e | 3 | MVD! | |||
| ian | 2 | 120 | lad | |||
| a | @| PROG | ssctk 7 Jay | ein | |||
| jabaie | mrel_2i| + | se | er | |||
| pan | reo 20] | pore 3 | ||||
| <e | = —=d cir | ise cur | ||||
| mea 18 | ia | Ee | ||||
| mR 18 | ies | Tee |
ae --- 10D TaLsiSa] 1 = 3) S2y = 1 pura 1 Vo meis |
| Olae 3y| | ; | z 5 | ! | ||
| eae a Oe | i e32 [38 14 MRIS | —— | |||
| matt stint | oe )oa 13 | ! | mba. 14 | MYDR 14 ‘| | |
| ' | ave | 7 | 3 | ||
| me) ay | ' | 5 izmReo | RVOT 2 atsiee [3 | me 12 Haisi eel | ||
| mau | ' | coo | Rar | woe | | iNET |
| MLE Shon | 1 | 72 10 | ' | RVs, 10 | |
| MIL ela | | | 3 3 | i | VODs 5 | |
| \4e | LTT TIS ---4 | mos 4 | |||
| £32 eer | o> DIP sHuNT | mvoe 3 | |||
| MS dena | —F | MVD 2 | |||
| ENA | MEMORY DEVICE | = |
PERSONALITY ssc >| SELECTION SEsRE acts mn fe, a Configuration shawn Pura 3 |
| ——_______ | is For S voLTONLy | isre sda | tsR4 5 |
| MOVING OBSECTS | 2G EPROM | i | er |
SHIFT REGISTERS LoaD LOGIC | $
| 4 | i | / |
Ele _13| prom [2 SESRZ see Eee] ———
| See | £32 3 | mn \ ese 2) gy [3 SeeRs | |
| Ele id | mw 2 [isco | u | [a SESR4 |
1H 10 7s
| m2HW B | 1 | 633{ |S Emin |
| ‘ave el | \ | @_EMeviD |
m2vw @|tsoo [o_ Ema
| MRI | i | new e[.soo)pl fee kr |
| 32 | 13|ts00 p> _ | Sruitn-y (EL |
sc lig e__ a WRIo @|tsao 34 isc Las 5] & Nt 5 isc mivip 4 |LS00 M2RI isH
| —______f ____ | EMz2viO__10 | 8 | smoovor |
| [IMAGE SELECTION LOGIC | mevidD 3 |L800 | ae |
ee 15H Which Moving Obje t+?) MOVING OBJECTS | REGISTER CONTROL, LOGIC [5 HIET 6502 GAME LOGIC PCB : meee OA a
MOVING OBJECT VIDEO GENERATION 70F8 77-3374 =i
This page reads as a drawing: its text was drawn rather than typeset, and comes out in fragments. See the original scan.
21 0.19 C8 CIT
GND ae -
| wail | TF | 3p 25v5) |
avd =I2vdelO ~Sde
| 70 | H2sdetO | : | A4G. | po | +5 |
| MAIN HARNESS | WARES 4\F | T wie | alge |
a MW a Js MEL [5 wRED wea, Rar _22| c50 lcst OB ABEL 23) 55 2G__ 25, ga RESET 34) RES AIG sipsi AG) aso ABD7 26) p7 ABS oe ‘ABDS Ds ABD4 De ABDS bs ABD2 2 ABDI 32 py 6520
To Logie BOARD ARDS _35] yg
P2
THIS TABLE REFERS TO POWER ¢ GND PINS NOT SCHEMATICALLY REPRESENTED.
DEVICE TYPE
pe
BYPASS .tpf FOR EVERY OTHER 1.0. © OY OE VINOBO & G4
= —= —— = ae
| maormme | ES Toon | To-81 | [ MAeK Von STRVER | gaya | ADBIG/couoR Pee | ' | 735877 | |
| al | a | a | ; | conv seni naw | cabins | SCHEMATIC. | DIRGRAI | oS |
RESET 40
per NEAL R. 200K 4B 7ALSI54
ssi lee a
PARK WON STRIVER 2B one 8253 °" oot 100K fey music set
MAK VON STRWER DONOT SCALE DRAWING. 390 JAVA DR.
PROGRAM MEMORY
SA
NOTES UNLESS OTHERWISE SPECIFIED:
Auplo/GoLak PCB SCHEMATIC DIAGR AN
+Sy
2.7K. Ral
L3Kq, R26
80% RIP
s300 R24
twos. R25
822 R20
sag R22
394 RIB
afaag
pe as 8 alt R26 & ie ok > Rat - — oye FECTS exo > 2 ple EFFEC We voLume
NOTES UNLESS OTHERWISE SPECIFIED: Frees cescnnon — Pe""NEAL R. ZOOK 31 | MARK voN STRVER Sn — Suen DIAGRAM 17-3387-\I HARK VON STRVER
MUSIC ors R9 10K
yoLume
PNEAL R. 200K MACK vow STRUER PN MARK VON-STRIVER PROTECT EARN DO NOT SCALE DRAWING. 408-734-9410 Frressorscnrnon DIP SHUNT CONFIGURATION DOTTED LINE FoR LM379 SOLID LINE FOR = LM377
<-> #2 Ine ws
sean (stir 4)
NOTES UNLESS OTHERWISE SPECIFIED:
AUDIO/COLOR PCB SCHEMATIC DIAGRAM 77-3387- 1
BLUE DATA LATCH
J20 D7 all a ps VIDEO Poaeity
| S$RLD | D1 Ls aff | = | |
| £BLB | . > 374 a3} | vip Congr | |
| 5 | | | " | u |
| SCSYNG | apr le S | Lowl= TRIE |
| _5 KO HSYNC GND VSYNC
SMOAVID EN DATA LATCH J VAG —SLINES | VD7AIO | _+5vpc 14 PIN DIP SOCKET CoNNECTOR
~~ HUA HAW ~
SYNC POLARITY 330 Re eT cur For Low = TRUE RA wos, 4
| RED DATA LATCH | 2 | 3 | 2) Be LE SYNC | |
| 18 | 2 | SCSYNC | de | =/] 86 |
IT 14 A © HSYNCA HSYNC 9 ss >see —
(2A DAI VSYNCA
WRED PATTERA) CHARACTER COLOR DIVISION
PRIORITY ENCODER
SMOAVID 4 fo 4 pe PREZ SMozvib 2g 2 ue f po) ESPACES F108 As? SEES 10 PIN WAFER HEADER
| ESeicEO I fe | 4 | REDA | 2 | RED out |
e 6SO4 GRNA GRN OUT BLA BLU aur CSYNCA CSYNC OUT HSYNCA HSYNC_ouT VSYNCA VSYNC OUT OuTPuT TO TV MoNITOR (™RU MAIN
HARNESS )
5SCLK SOGN HAWN
Bite pe" /COLoR PCB o Caoas Beedhcas DIAGRAM 17-3387-1] CA 94086 408-734-9410
vt 14 PIN DIP SocKET (FROM LOGIC PCB position 48)
oft
i
fe}
SPRL 1G PIN DIP PATTERN w/seRs included ag chown Cay double as 16 PIA input cocket)
JZ
24 PIN DIP SOCKET (From LOGIC PCB PosiTION 13A)
AZ +5VDC AG Ag AS Ad A4 PAPZI AZ Pi PAP20. AZ PAP 14 Al POSX Ao D7 RDO RDG RDI ° RDS RD2 ° RD4
GND : RD3 | ch FAP2 T Tov (oni) All lines BUSSED TOGETHER except CHIP SELECTS (PCSO, PLSB—PCSIS) NOTES:
- For PROMS +5V (UCC) = PIN 24
2. OND = PIN 12 1/0 24, BYPASS CAPS WET SHOWN, Between +5VDC aud GND, VAWE Van Ova)
u4
2116 EPROM (v over) Us
2716 Pham (sv one) UG
2116 EPROM (v over) U7
2Ue Ercan (ev oney) Us
2716 EPROM (6v ont) uq
EPROM (sv ony) Ceramic Ok)
OE" 502 LOGIC PCB FOR ExPAUDED memory 390 JAVA DB ‘SUNNYVALE CA 94086 408-734-9410 MEMORY EXPANSION PCB (77- 3389-14) SCHEMATIC 77-33849-11
74-6506 NUT, KEP 74-5466 BUSHING
74-5467 RING RETAINING
74-5189 SCREW, PAN HD. 72-3063 SWITCH 68-0127-i0 PLATE , SWITCH 74-5212 SPACER.
68- 2031-10 DISC, LOWER 74-5248 SPACER, 73-9081 WASHER , BELLEVILLE 68 - 0030-10 PLATE ,UPPER 74-6525 SCREW, FL.HD, 97- 1022-10 SHAFT
92-1021 - 10
DRAWING NO. DESCRIPTION
LIST OF MATERIAL DESIGN DRAWNG mh 4. 390 uava pa pewewsenenet VENTURE ™ JOY STICK-8 POSITION SUNNYVALE CA s4086 DO NOT SCALE DRAWING / 408-734-9410
LoGic BD (NOTE 3)
AWAY DOWA GEN OM WHT FIRE YEL_ON BLU #WAY RIGHT ORG_ON WHT | ONE PLye START RED_ON GEN GRN GRA GRA GRA GRN, GRAD ae SEE NOTE 5
GRN ee i = MOLEX. G PIN FLAT (WAFER ) NOK LOCKING FEMALE P/N O9-: ~7O6/ / 5D U20l MOKNITOR VIDEO BLK ON GRY RED _ON GRY GRA_OM GRY KED BLU ON GRY a WHT ON GRY
| com | BLU | WHT ON ERAT | HSYNC | |
| 4WAY UP | RED_ON WHT | [ _GRy | i | VSYNC |
| 4 WAY LEFT | VIO OM WHT | GND |
TWO plyk START YEL ON GRN SW, REG. BUF, De (IN) SW, REG. BUF. D4 (IN) ‘SW, REG. BUF. D2 (IN) SW, REG, BUF DD (IN) GND NS
NC NC A/D CONVERT (mz) AIS AE NC NC SW, REG BUF D7(/N) SW. REG, BUF, DS (IN) SW. REG. BUF D3 (1N) SW.REG. BUF Di (iN) NC NC COLOR MOD BLK ON ORG PCB BLK ON VIO NC RED Ne RED Ne RED Gen Ne RED WHT ON BRA _| RED WHT ON GRY _|
RED BLU ON GRY
GRN_ON GRY NC WHT ON BLU RED ON GRY COIN 2 INPUT GRY A/D M1 DUAL 22 PIAL MOLEX MD PIM FEMALE “CINCH LOCKING FLAT -/5@ CTRS. FEMALE aa P/N 09-50-30) YEL BLK ON YEL BLK ON yi0 Hey (LO) —5V +5V +5V +5Y +5V +5V +5V GND VSYNC HSYNC. BLUE DATA GREEN DATA RED DATA NC ~PUTANABVS WX KEK CYORVET ACT TD MoM CNRGFVATATALS
GND +1ev (I) ~ lev (HI) -lzv (Lo) -5Y +12V (LO) SPKR (A) +eyY ©
NOTES 3 WON HO AUN ~ 5 |
SPKR (B) rev (Le) ay, “ev (40), 15 VCH!) +4l2v (HI) GND
- CONFIGURATION SHOWN FOR ELECTROHOME MONITOR,
- ABSOLUTELY NO SUBSTITUTIONS ON WIRE COLORS
- YI (DUAL 22 PIN EDGE CONN)| MUST HAVE POLARIZING KEY INSERTED BETWEEN PINS 546. 2, SEX OF CONNECTOR 1S THAT OF PIN. MALE PIN = MALE CONN, 1, ALL WIRES /BAWG. NOJES / UNLESS OTHERWISE SPECIFIED. G PINTS G D
WAT ON BLU
YEL BLK _ON [oRG|
OR GRN BRN. BRN
RED ON GRN
GRN ON WHT
ViO_OM WHT ED ON WHT ORG _ON WHT. YEL ON BLU YEL ON GRAJ
BLE ON GRY
GREEN
KE 15 PIN FEMALE CINCH (EDGE) AUDIO. BOARD -/S@C7RS. AUXILIARY Mt iD @ / ia MOD REGULATOR BOARD 5V POWER SUPPLY CONTROL HARNESS COIN, HARNESS COIN HARNESS
NC SPKR(B)| / SPKE(A)| 2 GND SPIN MALE MOLEX 12 PIN FEMALE MOLEX WAFER eS -l2v(H1) ~1ev(Lo) t/2V(Hl) GND 4WAY RIGHT| -5Y rlev(Lo) COINZ INPUT! 2
FIRE TWO PLYR STR:
eer - — 390 JAVA DR =
| pagegcowe sg moran oF | j | SUNNYVALE | 6502 MAIN HARNESS | 5 | |||
| Eenesogas | P= | : | - | Bebe | COLOR | HR| | 71-2413 -/] |
CONTROL PANEL HARNESS SCHEMATIC
DoysTiCk
microswitcd ConmecrianS «205% .020 FASTONS
——_ Right [=
=] vow [=}—¢
LeFr
—“ up —+
| __RED On _GRN UE Pye START Cen ON ORT A-WAY Doww :
4-wAY UP == : ae — i ORG_ON WHT PEL on BLO PEL_ON GRN 4-WAY RIGHT FAST. or FIRE TWO PLYR START A/D ML Ajo m2 + +5 ou seu — bait GRIN ND PLAYER BUTTON nD a LEAF sus/TCH CONNECTIONS IS Pi) MALE (Gen. U4" semi-shigped ends) MOLEX |
Two Lo PLYR <——
one iiiie PLYR =———
FAST > oe < FIRE
NOTES! 1, All wires 22 awg. insulated unless otherwise Specified.
ABSOLUTELY MO SUBSTITUTIONS ON SPECIFIED WIRE Coors Z
Free oescnoTON 990 JAVA DR
arauvaoe CONTROL PANEL HARNESS
VENTURE™
Co) HARNESS SCHEMATIC UNIVERSAL COM HARNESS
P13
| 3 pw mace | 1 | am | — | RED | __{]SULATED 18-22 ay. |
Molex connector | 2 Pel au BUTT CONNECTORS
| (ro man waewess) | 3 | ce | —— | al | ie | i | | (re con counreR) |
hy muLex 03-09-2032 |
| > | 2 | RY | = |
3 é
| a | g | a | 8 |
1 )
| Ul | Ul | [il | i} |
| com | No | com | NO |
«205 x .632 FASTONS .205x ,O32 FASTONS NoN-INSULATED NON-INSULATED
| NOTES; | 4. | All wires 22 awg. insulated | (m meECHA miceoswirch) | (fo mech 2 mickoswireH) |
vnless otherwise specified. Z. ABSOLUTELY MO_ SUBSTITUTIONS ON SPECIFIED wi COLORS
oo 390 JAVA DR SUNNYVALE Suva UNIVERSAL COIN HARNESS VENTURE™
21 0.19 C8 CIT
GND ae -
| wail | TF | 3p 25v5) |
avd =I2vdelO ~Sde
| 70 | H2sdetO | : | A4G. | po | +5 |
| MAIN HARNESS | WARES 4\F | T wie | alge |
a MW a Js MEL [5 wRED wea, Rar _22| c50 lcst OB ABEL 23) 55 2G__ 25, ga RESET 34) RES AIG sipsi AG) aso ABD7 26) p7 ABS oe ‘ABDS Ds ABD4 De ABDS bs ABD2 2 ABDI 32 py 6520
To Logie BOARD ARDS _35] yg
P2
THIS TABLE REFERS TO POWER ¢ GND PINS NOT SCHEMATICALLY REPRESENTED.
DEVICE TYPE
pe
BYPASS .tpf FOR EVERY OTHER 1.0. © OY OE VINOBO & G4
= —= —— = ae
| maormme | ES Toon | To-81 | [ MAeK Von STRVER | gaya | ADBIG/couoR Pee | ' | 735877 | |
| al | a | a | ; | conv seni naw | cabins | SCHEMATIC. | DIRGRAI | oS |
RESET 40
per NEAL R. 200K 4B 7ALSI54
ssi lee a
PARK WON STRIVER 2B one 8253 °" oot 100K fey music set
MAK VON STRWER DONOT SCALE DRAWING. 390 JAVA DR.
PROGRAM MEMORY
SA
NOTES UNLESS OTHERWISE SPECIFIED:
Auplo/GoLak PCB SCHEMATIC DIAGR AN
+Sy
2.7K. Ral
L3Kq, R26
80% RIP
s300 R24
twos. R25
822 R20
sag R22
394 RIB
afaag
pe as 8 alt R26 & ie ok > Rat - — oye FECTS exo > 2 ple EFFEC We voLume
NOTES UNLESS OTHERWISE SPECIFIED: Frees cescnnon — Pe""NEAL R. ZOOK 31 | MARK voN STRVER Sn — Suen DIAGRAM 17-3387-\I HARK VON STRVER
MUSIC ors R9 10K
yoLume
PNEAL R. 200K MACK vow STRUER PN MARK VON-STRIVER PROTECT EARN DO NOT SCALE DRAWING. 408-734-9410 Frressorscnrnon DIP SHUNT CONFIGURATION DOTTED LINE FoR LM379 SOLID LINE FOR = LM377
<-> #2 Ine ws
sean (stir 4)
NOTES UNLESS OTHERWISE SPECIFIED:
AUDIO/COLOR PCB SCHEMATIC DIAGRAM 77-3387- 1
BLUE DATA LATCH
J20 D7 all a ps VIDEO Poaeity
| S$RLD | D1 Ls aff | = | |
| £BLB | . > 374 a3} | vip Congr | |
| 5 | | | " | u |
| SCSYNG | apr le S | Lowl= TRIE |
| _5 KO HSYNC GND VSYNC
SMOAVID EN DATA LATCH J VAG —SLINES | VD7AIO | _+5vpc 14 PIN DIP SOCKET CoNNECTOR
~~ HUA HAW ~
SYNC POLARITY 330 Re eT cur For Low = TRUE RA wos, 4
| RED DATA LATCH | 2 | 3 | 2) Be LE SYNC | |
| 18 | 2 | SCSYNC | de | =/] 86 |
IT 14 A © HSYNCA HSYNC 9 ss >see —
(2A DAI VSYNCA
WRED PATTERA) CHARACTER COLOR DIVISION
PRIORITY ENCODER
SMOAVID 4 fo 4 pe PREZ SMozvib 2g 2 ue f po) ESPACES F108 As? SEES 10 PIN WAFER HEADER
| ESeicEO I fe | 4 | REDA | 2 | RED out |
e 6SO4 GRNA GRN OUT BLA BLU aur CSYNCA CSYNC OUT HSYNCA HSYNC_ouT VSYNCA VSYNC OUT OuTPuT TO TV MoNITOR (™RU MAIN
HARNESS )
5SCLK SOGN HAWN
Bite pe" /COLoR PCB o Caoas Beedhcas DIAGRAM 17-3387-1] CA 94086 408-734-9410
vt 14 PIN DIP SocKET (FROM LOGIC PCB position 48)
oft
i
fe}
SPRL 1G PIN DIP PATTERN w/seRs included ag chown Cay double as 16 PIA input cocket)
JZ
24 PIN DIP SOCKET (From LOGIC PCB PosiTION 13A)
AZ +5VDC AG Ag AS Ad A4 PAPZI AZ Pi PAP20. AZ PAP 14 Al POSX Ao D7 RDO RDG RDI ° RDS RD2 ° RD4
GND : RD3 | ch FAP2 T Tov (oni) All lines BUSSED TOGETHER except CHIP SELECTS (PCSO, PLSB—PCSIS) NOTES:
- For PROMS +5V (UCC) = PIN 24
2. OND = PIN 12 1/0 24, BYPASS CAPS WET SHOWN, Between +5VDC aud GND, VAWE Van Ova)
u4
2116 EPROM (v over) Us
2716 Pham (sv one) UG
2116 EPROM (v over) U7
2Ue Ercan (ev oney) Us
2716 EPROM (6v ont) uq
EPROM (sv ony) Ceramic Ok)
OE" 502 LOGIC PCB FOR ExPAUDED memory 390 JAVA DB ‘SUNNYVALE CA 94086 408-734-9410 MEMORY EXPANSION PCB (77- 3389-14) SCHEMATIC 77-33849-11
74-6506 NUT, KEP 74-5466 BUSHING
74-5467 RING RETAINING
74-5189 SCREW, PAN HD. 72-3063 SWITCH 68-0127-i0 PLATE , SWITCH 74-5212 SPACER.
68- 2031-10 DISC, LOWER 74-5248 SPACER, 73-9081 WASHER , BELLEVILLE 68 - 0030-10 PLATE ,UPPER 74-6525 SCREW, FL.HD, 97- 1022-10 SHAFT
92-1021 - 10
DRAWING NO. DESCRIPTION
LIST OF MATERIAL DESIGN DRAWNG mh 4. 390 uava pa pewewsenenet VENTURE ™ JOY STICK-8 POSITION SUNNYVALE CA s4086 DO NOT SCALE DRAWING / 408-734-9410
LoGic BD (NOTE 3)
AWAY DOWA GEN OM WHT FIRE YEL_ON BLU #WAY RIGHT ORG_ON WHT | ONE PLye START RED_ON GEN GRN GRA GRA GRA GRN, GRAD ae SEE NOTE 5
GRN ee i = MOLEX. G PIN FLAT (WAFER ) NOK LOCKING FEMALE P/N O9-: ~7O6/ / 5D U20l MOKNITOR VIDEO BLK ON GRY RED _ON GRY GRA_OM GRY KED BLU ON GRY a WHT ON GRY
| com | BLU | WHT ON ERAT | HSYNC | |
| 4WAY UP | RED_ON WHT | [ _GRy | i | VSYNC |
| 4 WAY LEFT | VIO OM WHT | GND |
TWO plyk START YEL ON GRN SW, REG. BUF, De (IN) SW, REG. BUF. D4 (IN) ‘SW, REG. BUF. D2 (IN) SW, REG, BUF DD (IN) GND NS
NC NC A/D CONVERT (mz) AIS AE NC NC SW, REG BUF D7(/N) SW. REG, BUF, DS (IN) SW. REG. BUF D3 (1N) SW.REG. BUF Di (iN) NC NC COLOR MOD BLK ON ORG PCB BLK ON VIO NC RED Ne RED Ne RED Gen Ne RED WHT ON BRA _| RED WHT ON GRY _|
RED BLU ON GRY
GRN_ON GRY NC WHT ON BLU RED ON GRY COIN 2 INPUT GRY A/D M1 DUAL 22 PIAL MOLEX MD PIM FEMALE “CINCH LOCKING FLAT -/5@ CTRS. FEMALE aa P/N 09-50-30) YEL BLK ON YEL BLK ON yi0 Hey (LO) —5V +5V +5V +5Y +5V +5V +5V GND VSYNC HSYNC. BLUE DATA GREEN DATA RED DATA NC ~PUTANABVS WX KEK CYORVET ACT TD MoM CNRGFVATATALS
GND +1ev (I) ~ lev (HI) -lzv (Lo) -5Y +12V (LO) SPKR (A) +eyY ©
NOTES 3 WON HO AUN ~ 5 |
SPKR (B) rev (Le) ay, “ev (40), 15 VCH!) +4l2v (HI) GND
- CONFIGURATION SHOWN FOR ELECTROHOME MONITOR,
- ABSOLUTELY NO SUBSTITUTIONS ON WIRE COLORS
- YI (DUAL 22 PIN EDGE CONN)| MUST HAVE POLARIZING KEY INSERTED BETWEEN PINS 546. 2, SEX OF CONNECTOR 1S THAT OF PIN. MALE PIN = MALE CONN, 1, ALL WIRES /BAWG. NOJES / UNLESS OTHERWISE SPECIFIED. G PINTS G D
WAT ON BLU
YEL BLK _ON [oRG|
OR GRN BRN. BRN
RED ON GRN
GRN ON WHT
ViO_OM WHT ED ON WHT ORG _ON WHT. YEL ON BLU YEL ON GRAJ
BLE ON GRY
GREEN
KE 15 PIN FEMALE CINCH (EDGE) AUDIO. BOARD -/S@C7RS. AUXILIARY Mt iD @ / ia MOD REGULATOR BOARD 5V POWER SUPPLY CONTROL HARNESS COIN, HARNESS COIN HARNESS
NC SPKR(B)| / SPKE(A)| 2 GND SPIN MALE MOLEX 12 PIN FEMALE MOLEX WAFER eS -l2v(H1) ~1ev(Lo) t/2V(Hl) GND 4WAY RIGHT| -5Y rlev(Lo) COINZ INPUT! 2
FIRE TWO PLYR STR:
eer - — 390 JAVA DR =
| pagegcowe sg moran oF | j | SUNNYVALE | 6502 MAIN HARNESS | 5 | |||
| Eenesogas | P= | : | - | Bebe | COLOR | HR| | 71-2413 -/] |
CONTROL PANEL HARNESS SCHEMATIC
DoysTiCk
microswitcd ConmecrianS «205% .020 FASTONS
——_ Right [=
=] vow [=}—¢
LeFr
—“ up —+
| __RED On _GRN UE Pye START Cen ON ORT A-WAY Doww :
4-wAY UP == : ae — i ORG_ON WHT PEL on BLO PEL_ON GRN 4-WAY RIGHT FAST. or FIRE TWO PLYR START A/D ML Ajo m2 + +5 ou seu — bait GRIN ND PLAYER BUTTON nD a LEAF sus/TCH CONNECTIONS IS Pi) MALE (Gen. U4" semi-shigped ends) MOLEX |
Two Lo PLYR <——
one iiiie PLYR =———
FAST > oe < FIRE
NOTES! 1, All wires 22 awg. insulated unless otherwise Specified.
ABSOLUTELY MO SUBSTITUTIONS ON SPECIFIED WIRE Coors Z
Free oescnoTON 990 JAVA DR
arauvaoe CONTROL PANEL HARNESS
VENTURE™
Co) HARNESS SCHEMATIC UNIVERSAL COM HARNESS
P13
| 3 pw mace | 1 | am | — | RED | __{]SULATED 18-22 ay. |
Molex connector | 2 Pel au BUTT CONNECTORS
| (ro man waewess) | 3 | ce | —— | al | ie | i | | (re con counreR) |
hy muLex 03-09-2032 |
| > | 2 | RY | = |
3 é
| a | g | a | 8 |
1 )
| Ul | Ul | [il | i} |
| com | No | com | NO |
«205 x .632 FASTONS .205x ,O32 FASTONS NoN-INSULATED NON-INSULATED
| NOTES; | 4. | All wires 22 awg. insulated | (m meECHA miceoswirch) | (fo mech 2 mickoswireH) |
vnless otherwise specified. Z. ABSOLUTELY MO_ SUBSTITUTIONS ON SPECIFIED wi COLORS
oo 390 JAVA DR SUNNYVALE Suva UNIVERSAL COIN HARNESS VENTURE™
UNIVERSAL POWER SUPPLY ASSEWIELY HARNESS SCHEMATIC
oe
| 3 om remae | t | —_ | F5VDC (SOLDERED TO" +” TERMINAL(S) ON SF YLT POWER svPPLY) | |
| MOLEX commecTor | 2 | RED. | FE ude (SoLdeReD To" +” TERmMAL(S) ON S YoLT POwER SorPLY) | |
| TO Mn) HARNESS.| 3 | GEN. | GND (Svar de ReTuRU)(SOLDERED To =" TEEMIWAL OW SVOLT POWER SUPPLY) | |
| PAs 03-09-1033 | GRN | — | GND G veer De weTuRWGoL ERED TO "—” TERNAL ON ES VOLT Powee SUPPLY) |
PIO
| 3 AW MALE | 1 | BLK | —— | — | AC HOT (SoLDERED TO PRIMARY TERIAL’ OF POWER SUPPLY ASSY, TRAUSFORMER (5) %€ |
| WOLEX COECTOR | 2 | WAT. | ~ | - | AC RETURN) (S0LDERED TO PRIMARY TERMINALS OF POWER SVPPLY ASSY. TRAUSFORMER(E) ¥ |
TO WAN) HARUESS.| 6eN) a _ a AC GND (SoreKED TO CHASSIS GROUND LUG OF F VAT POWER SUPPLY) PA) 03-09-2032
- which transformer beads or terminals vsed varies with menvtacturer aud input AC valtage reguiremeuts
NOTES? 4, All wires 18 awg insvleted vnless otherwise specitied 2, ABSOLUTELY NQ SUBSTITUTIONS ou specified wire colors
prrue oescnPnoN. SORNWWALE UNIVERSAL, POWER SUPPLY Bee ASSEMBLY, HARNESS
UNIVERSAL POWER SUPPLY ASSEWIELY HARNESS SCHEMATIC
oe
| 3 om remae | t | —_ | F5VDC (SOLDERED TO" +” TERMINAL(S) ON SF YLT POWER svPPLY) | |
| MOLEX commecTor | 2 | RED. | FE ude (SoLdeReD To" +” TERmMAL(S) ON S YoLT POwER SorPLY) | |
| TO Mn) HARNESS.| 3 | GEN. | GND (Svar de ReTuRU)(SOLDERED To =" TEEMIWAL OW SVOLT POWER SUPPLY) | |
| PAs 03-09-1033 | GRN | — | GND G veer De weTuRWGoL ERED TO "—” TERNAL ON ES VOLT Powee SUPPLY) |
PIO
| 3 AW MALE | 1 | BLK | —— | — | AC HOT (SoLDERED TO PRIMARY TERIAL’ OF POWER SUPPLY ASSY, TRAUSFORMER (5) %€ |
| WOLEX COECTOR | 2 | WAT. | ~ | - | AC RETURN) (S0LDERED TO PRIMARY TERMINALS OF POWER SVPPLY ASSY. TRAUSFORMER(E) ¥ |
TO WAN) HARUESS.| 6eN) a _ a AC GND (SoreKED TO CHASSIS GROUND LUG OF F VAT POWER SUPPLY) PA) 03-09-2032
- which transformer beads or terminals vsed varies with menvtacturer aud input AC valtage reguiremeuts
NOTES? 4, All wires 18 awg insvleted vnless otherwise specitied 2, ABSOLUTELY NQ SUBSTITUTIONS ou specified wire colors
prrue oescnPnoN. SORNWWALE UNIVERSAL, POWER SUPPLY Bee ASSEMBLY, HARNESS
PROPRIETARY DESIGN DRAWING THIS DOCUMENT IS THE PROPERTY OF | DETAILS AVAILABLE EXIDY, INC. AND MAY NOT BE REPRO- UPON WRITTEN DUCED OR DISCLOSED TO OTHERS REQUEST WITHOUT WRITTEN AUTHORIZATION.
Tio! 4 PIN: MALE MOLEX RED PIN 03-09-1042 WHT on BLU 42 16-22 AWG
(NOW~INSULATED)
= $ BUTT. CONNECTORS
_ 2} 205X020 FASTONS GREEN
PINS, MOLEX PN O2:09 (He
Tior REO 2, WHT ON BLU 3 We
- GREEN
NOTES:
- NO CHANGES IN SPECIFIED WIRE Cotors, 2, ALL WikES 22 AWG. SZ EQUIVALENT PINS AND HOUSING MAYBE UsED.
NOTES UNLESS OTHERWISE SPECIFIED: | TITLE/DESCRIPTION \ TOLERANCES Maree Alo "3 Ze 1"
AUXILIARY COIN DOOR
SUNNYVALE [FRACTIONS = AJ/4 AVA “s HARNESS SCHEMATIC y (WING NO. pag ae DECIMALS x= AJ/ AK jig ENGINEER : 20 DRAWING NO. ANGLES = A//4° DO NOT SCALE DRAWING Hie il Ihe 71-241 7-44 ENGINEER
@ BHO SRaPrtcs, nc. REORDER NO. 20503 24 vert. Jame or 35 vcT. 2 AMP
I. All capacitance’ values
shown in micrefarads ( wf). 60S If UT4O010 REVISIONS
DESCRIPTION APPROVED
2N3055
NEXT ASSY USED ON APPLICATION UNLESS OTHERWISE SPECIFIED | CONTRACT NO. DIMENSIONS ARE IN INCHES TOLERANCES ARE: FRACTIONS DECIMALS ANGLES APPROVALS DATE +1Zv (HN)
+12v (Lo)
-12v (Le)
—I2v CHI) } GND
SCHEMATIC
20//78!
DO NOT SCALE P|
DTAGGER «25
THESE WIRES TO HARNESS BUT GONNECTOR \ CRUCT 3
\ \ ny
a Ae
- L__J
| FOR HOV OPERATION | —~ | | | FOR 11/0 V OFERATION |
THESE WIRES TO HARNESS BUT CONNECTOR CWHITED
MIDWEST 773P7 EXIDY P/N 64-4029 , CONNECTOR
| EXIDY | BRIM MOLEX CONE: TOR | MOTOROLA Z25D2Z2S5 237820 |
EXIDY P/N 45-4033 PINS APE MOLEX 02-09-1118 EUDY bi 8os5
¥ NOTE!
*NOTEZ ® NOTE | % NOTEY
crAgser.26
- x Wee: HEAT SHRINK,
| FOR ZZOV OPERATION | | mes cao 10 HARNESS uTT | TURING |
ZpnneToR CwMITED Sree oy FOR 2Z0V OPERATION
WIRES GOTO HARiSS BUTT CONNECTOR (BLY STRIP 2S
noms
| 110 VOLTS | 220 VOLTS | ¥ | I | OLT | 220 VOLTS |
titer (COLOR | GUAGE numsen|DIOR | GUAGE WIRE \cowor | GUAGE Momsen| COR | GUAGE
ED t muvee | 701 RED 77 |
EL yeu TEL
a re
Vel, GA. GA. FEDS GEN yel Vet /BUK RED
REB/ERN
GEN
WHT 7 BL DOOQOO OSOOoG: WHT Re
| fonern | pero | 390 JAVA OR | MONITOR 180.4 |
m saawnpe
| — | VENTURE" | eastoae | TRANS | FORMER ASS Y. |
EXIDY VENTURE!
APPENDIX A: PARTS LIST
VENTURE(TM) FINAL ASSEMBLY
Part Number
38-5118-10 38-5122-10 79-2311-10 38-5059 96-0134 38-5057-10
or 38-5057-20 or 38-5057-30
or 38-5057-40
or 38-5057-50 38-5034 38-5061-10 67-5000 71-2413 71-2330 38-5117-10 77-3377-15 77-3387-15 75-5183-10 75-5184-10 72-3000 68-7010 88-4026 92-1021-10 68-0035 68-6050-10 68-6050-20 68-0126-10 68-0124 68-0125 89-1008 83-0009 87-9003 75-5185 75-5186 75-5187-10 89-1009-10 89-1010-10 71-3388-10 74-5165-10 74-6513-10 74-4710 74-5246 Description
cabinet assy control panel assy 19" monitor power supply assy monitor isolation xfmr assy American Standard db! coin door assy (w/penny stop)
British/Australian coin door assy
French coin door assy
German coin door assy
Spanish coin door assy power cord assy speaker assy lock and key assy main harness assy cable, PCB ribbon fluorescent light assy logic board PCB assy audio color board PCB assy pressure sensitive side art right pressure sensitive side art left interlock switch interlock bracket locktite 8-way joystick knob (black) 6 x 9 speaker grill universal coin box universal coin box lid coin box hasp logo plex mounting bracket monitor stop brkt label, serial no. aluminum-black letters 3 amp fuse label packing list envelope ambient solar-control plastic shield display plastic panel, silkscreened logo plastic panel, silkscreened FCC warning label (small) FCC warning label (large) isolation xfmr extension harness washer 3/16 ied.xe 1 1/4 o.d. fender 10-32 kep nut #8x 1/2 pan hd. phil wood screw 10-24 x 1 1/2 hex full thread bolt
FINAL ASSEMBLY, continued
74-6402 74-6506 74-4603 74-8532-10 74-6524-10 74-8533-10 74-5163-10 88-4002 88-4001 74-5464
CONTROL PANEL
Part Number
68-0123 38-5119-10 38-5044 72-3022 75-5188 74-5247 74-6506 71-2391 #10 American plain washer 10-24 kep nut #8 x 3/4 pan hd. phil wood screw 10-32 x 1" pan hd. allen drive mach screw black 10-24 x 1 1/2 carriage bolt black 1/4 20 x 3/4 full thread hex bolt 1/4 ied. x 5/8 o«d. amer plain washer small tie wrap large tie wrap #8 x 1/2 pan hd. square drive blk ox wood screw
ASSEMBLY
Description
control panel fab 8-way joystick assy wico pushbutton assy switch, pushbutton w/ nut and washer control panel polycarb overlay, silkscreened 10-24 x 5/8 carriage bolt black 10-24 kep nut control panel harness
PUSH BUTTON ASSEMBLY
Part Number
72-3061 72-3062 74-0203 Description
Switch assy, Wico push button pal nut
MONITOR ISOLATION TRANSFORMER ASSY
Part Number
FR 63-4029 61-8058 61-8054 61-8057 61-8055 76-1212-50 71-2001-14 61-8072 74-6402 74-6506 74-5463-01 74-5165 88-4002 61-8313 Description Reference
isolation transformer midwest 773P7 molex connector 03-09-2032 AC input P22 male molex pins 02-09-2118 P22 molex connector 03-09-1023 AC monitor J23 female molex pins 02-09-1118 J23 transformer mounting board transformer harness butt splice blue washer, #10 plain kepnut 10-24 screw, 10-24 x 1" ph phil. mach fender washer 1/4 id 1 1/4 od tie wrap small butt splice red
AMERICAN STANDARD DOUBLE COIN DOOR
std double coindoor, Vendal! w/penny stop 25 cent American coin door acceptor
universal coin door harness Part Number Description
66-4003 66-4007 supp w/ item coin door key 71-2390 64-2000 coin meter 88-4002 tie wrap, small 61-8313 butt splice, red 74-3502 6-32 kepnut
6502 GAME LOGIC PCB ASSEMBLY
Part Number
48-2000 48-2005 48-2010
48-2015 48-2020 48-2332 48-2035 48-2316 48-2045 48-2055 48-2067 48-2071 48-2307 48-2321 48-2090 48-2095 48-2100
48-2115
48-2328 Reference Description Location
ic 7400 3D, 15H IC 7402 1H, 6H IC 7404 1D, 3F, 4D, 10F, 11F 1C 7407 2c (C 7408 5E IC 74LS11 3H IC 7420 2F IC 74LS21 12F, 15E IC 7427 7F, 2H IC 7432 6F IC 7474 1c IC 74L$112 2E, 6E IC 74LS138 5B, 5D IC 74L$139 7E, 16H IC 74157 14A, 14E IC 74161 1E,20,4F,5F IC 74166 12B, 12D, 13D, 14D, 15D IC 74193 10E, 12E, 13F, 15F 14F, 16F, 11,13 IC, 74L$241 8C, 1A, 3A 3B, 4H, 6B, 7D, 9B, 9E, 15A
6502 GAME LOGIC PCB ASSEMBLY (continued)
Part Number
48-2350
48-2314
48-6502 48-2334
48-9220 48-9099-01 48-9099-02 48-9219 46-3025 59-5135 59-5120 59-5115 59-5110 59-5105 51-0003 51-0002 51-0001 51-9004 23-4033 23-4035
21-4015
20-4014 20-4005 72-3025 72-3042 45-3036 61-8041 61-8062 77-3374 61-8045
61-8035 61-8060 61-8157 Description
IC 741S245
IC 7418374
microprocessor 6502 2114 (1K x4) RAM
2176 (VEL 11D-1) 6331 PROM (.32 X 8) 6331 PROM (.32 X 8) 6301 PROM (256 X 4) VEL5C-1 §N4002 diodes res. 470 omega 1/4 w 5% ress, 1.2K 1/4w 5% res., 1.8K 1/4w 5% res., 2.2K 1/4w 5% rese, 267K 1/4W 5% res., 220 omega 1/4w 5% 10 pin sip rese, 2.2K 1/4w 5% 10 pin sip res., 4.7K 1/4w 5% 10 pin sip res., 6.8K 1/4w 5% 10 pin sip cap, .01 uf ceramic disc cap, «1 uf ceramic disc
cap, 6.8 uf 25v tant. dip
cap, 33 uf 25v electrolytic cap, 470 uf 10v electrolytic dip shunt jumper paks 16 pin dip switch 8 pos. crystal, 11.289 connector 10 pin molex dip sockets 16 pin low profile print. circuit board dip socket 24 pin low profile
dip socket 40 pin low profile dip socket 14 pin low profile dip socket 18 pin low profile Reference Location
3C, 4C, 6C 15B, 13B 1F, 14B, 7C, 8E ° 2A 4A, 5A, 7B, 8B, 11C, 12C 13C, 14C 11D 6D 14H 5C 8E, 9E, 2H 1D, 2H 2C 1C, 2C 7E, 2A 1c, 2c 9E 16A 15A 14A 1D A/R per assy drawing 1C, 6E, 15D, 13F IC 2c 10H 4B, 10D, 11B 16A 1D 16C, 16E 5C, 6D, 14H
11D, 6A,7A, 8A 9A, 10A, 11A . 2A 16B 4A 5A 7B 8B 41C 12C 13C 14C
6502 Game Logic PCB Assembly (continued)
Part Number Description
21-4021 cap, 1 uf 25V dip tant 59-5138 res, 220 v 1/4 w 5%
59-5179 res, 180hm 1/4w 5% 23-4067 cap, 330 pf cer. disk 48-2300 74LS00 1.C. 48-2301 74LS02 1.C. Reference Location
C45, C52 R200, R311 at 5D R300-R308 5D 15C 8F
See addendum for part numbers of 2716 eprom progranmed.
AUDIO-COLOR PCB ASSEMBLY
Part Number Description
48-2307 74LS138 48-6520 6520 48-9209 6532 48-6502 6502 48-9210 6840 48-9211 74L8154 48-9212 8253 48-9213 4069 48-9069 4013 48-2302 74LS04 48-2300 74LS00 48-2314 74LS374 48-9214 4053 48-9215 4175 48-9216 4562 48-2305 7ALS74 48-2342 1M324 48-2013 7406 48-2341 74LS86 48-9217 4051 48-2321 74LS139 48-9112 1M377 48-2072 74148 47-2080 74151 48-2333 74LS174 23-4034 cap .1 uf cer 16v 20-4014 cap 33 uf 25v Electrolytic 20-4006 cap 100 uf 16v Electrolytic 59-5115 res 1.8K 1/4w 5% 59-5100 res 3.3K 1/4w 5% 59-5125 res 1K 1/4w 5% 45-3048 3.579545 mHz (series) 59-5016 res. 10 m 1/4w 5% 23-4070 cap 22 pf cer 16v 59-5182 res 300K 1/4w 5% 59-5045 res 100 K 1/4w 5%
AUDIO-COLOR PCB ASSEMBLY (continued)
Part Number Description
52-0009 61-8062 72-3025 61-8045 61-8103 23-4033 59-5070 59-5063 59-5025 59-5065 22-4032 59-5105 59-5119 59-5130 59-5136 59-5184 59-5185 59-5080 54-5019 20-4009 20-4022 61-8035 74-5065 res 4.7K sip (10 pin) 16 pin dip socket 16 pin dip shunt socket 24 pin dip socket 28 pin dip cap .01 uf cer 16v res 22K 1/4 w 5% res 27K 1/4w 5% res tm 1/4w 5% res 33K 1/4 5% cap 10 uf 25v dip tant res 267K 1/4w 5% res 1.3K 1/4w 5% tes 680 omega 1/4w 5% res 330 omega 1/4w 5% res 160 omega 1/4w 5% res 82 omega 1/4w 5% res 10K 1/4w 5% 10K pot cap 4.7 uf 16v Electrolytic cap. 1 uf 16v Electrolytic 40 pin dip socket standoff 6-32 x 5/8" nylon
UNIVERSAL POWER SUPPLY ASSEMBLY
Part Number Description
78-3001 63-4028 OR 63-4025 77-3365-15 71-2389-10 76-1211-10 74-3503 74-5198 74-3502 74-3500 74-4604 61-8072 61-8056 61-8054 88-4002 88-4001 88-4028 88-4008 88-4011 +5 vdc power supply 6 amp aux. transformer 1911 or 63-4035 Mfg. pin 773 pg.
aux. transformer 1893 power supply pcb assy power supply harness power supply mounting board screw, #6 x 1/2 | phillips pan head self tap screw, #6-32 x 3/4 pan hd phil machine kepnut 6-32 washer #6 amer std plain hex nut 8-32 nylon butt splice blue plug, 2 pin molex pins, male molex tie wrap, small tie wrap, large wire, 22 ga. buss-uncoarted solder SN60.03 dia 58 core flex mask and mold seal
AC LINE CORD HARNESS ASSEMBLY
Part Number Description Reference
| 71-2070 | AC line cord | PL1 |
| 60-6020 | fuse holder | F1 |
| 60-6001 | fuse 3 amp slow bin | F1 |
| 61-8039 | 3 pin molex recept | y1 |
| 61-8055 | individual femal pins | y1 |
88-4002 small tie wrap
| 61-8051-01 | fast on push on terminals .1875 | —1 |
| 61-8051-02 | fast on push on terminals .1875 | —2 |
| 61-8072 | TFB butt splice | E3 |
88-4012 shrink tubing 3/8
VENTURE (TM) SPEAKER ASSY
Part Number Description Reference
| 62-7061 | 6" X 9" oval speaker | cab. interior |
61-8056 conn. 2 pin male molex 03-09-2002 P4 61-8054 pins, male molex 02-09-2118
ISOLATION TRANSFORMER HARNESS
Part Number Description
61-8058 molex 3 pin plug 61-8039 molex 3 pin recept 61-8054 molex pin (male) 61-8055 molex pin (female) 88-4022 panduit tie wrap 4 in. 61-8313 butt splice (red) black wire 18-22 ga. white wire 18-22 ga. green wire 18-22 ga.
UNIVERSAL COIN DOOR HARNESS
Part Number
61-8058 61-8312 61-8054 61-8313 88-4002 N/A N/A N/A Description
molex 3 pin plug 03-09-2032 panduit terminal D18-188 molex pin (male) butt splice (red) panduit tie wrap red wire 18-22 ga. green wire 18-22 ga. blue wire 18-22 ga.
POWER SUPPLY HARNESS
Part Number
61-8058 61-8039 61-8054 61-8055 88-4022
CONTROL PANEL
Part Number
61-8095 61-8312
88-4002 61-8054 61-8312 Description
molex 3 pin plug molex 3 pin recept molex pin (male) molex pin (female) panduit tie wrap 4 in. black wire 18 ga. white wire 18 ga. green wire 18 ga.
HARNESS
Description
molex 15 pin plug panduit terminal D18-188 violet on white wire 18-22 ga. green on white wire 18-22 ga. ted on green wire 18-22 ga. green on blue wire 18-22 ga. orange on white wire 18-22 ga. red on white wire 18-22 ga. yellow on green wire 18-22 ga. green wire 18 ga. panduit tie wrap molex pin (male) +205 x .02 fast-ons
MAIN HARNESS
Part Number Description Reference
61-8043 61-8089 61-8039 61-8207 61-8113 61-8057 61-8058 61-8208 61-8308 61-8309
61-8311 61-8310
61-8054 61-8055 88-4002 88-4025 88-4005 molex 6 pin flat wafer conn. molex 4 pin plug molex 3 pin receptacle 61-8039 molex 15 pin receptacle molex 10 pin flat conn. 09-50-3101 molex 2 pin receptacle molex 3 pin plug molex 12 pin flat wafer conn. 15 pin cinch edge conn. dual 22 pin cinch edge conn. black wire 18 ga. brown wire 18-22 ga. red wire 18 ga. orange wire 18 ga. yellow wire 18 ga. green wire 18 ga. blue wire 18-22 ga. violet wire 18 ga. grey wire 18-22 ga. white wire 18 ga. blue on black wire 18-22 ga. blue on green wire 18-22 ga. black on yellow wire 18 ga. black on orange wire 18 ga. black on violet wire 18 ga. red on green wire 18-22 ga. yellow on green wire 18-22 ga. black on grey wire 18-22 ga. red on white wire 18-22 ga. green on white wire 18-22 ga. violet on white wire 18-22 ga. orange on white wire 18-22 ga. yellow on blue wire 18-22 ga. white on grey wire 18-22 ga. red on grey wire 18-22 ga. green on grey wire 18-22 ga. white on brown wire 18-22 ga. green on brown wire 18-22 ga. molex pin 08-50-0116 for wafer conn molex pin 08-03-0304 for Dual 22 conn. molex pin (male) 02-09-2118 molex pin (female) 02-09-1118 panduit tie wrap panduit tie clamp PLC1-51-58 1/8" shrink tubing
FLUORESCENT LIGHT ASSEMBLY
Part Number Description
70-6052 fluor. light fixture 70-6057 fluor. bulb (cool white) 71-2429 fluor. light harness with 50" length 70-6054 fluor. light starter
EIGHT-WAY JOYSTICK ASSEMBLY refer to Figure 2, Joystick Assembly.
Part Number Description
68-0030-10 upper mtg. plate 92-1002-10 handle w/ bushing 68-2031-10 lower disc 68-2030-10C switch plate (Case Hardened Steel) 73-9081 73-9081 beleville spring washer 74-5189 screw #4-40 x 5/8 L phil. pan hd 74-6525 screw 10-24 x 2 1/2" L flat hd. 74-5248 #10 x 7/16" L spacer 74-5212 #10 x 1 1/2" L spacer 74-6506 #10 24 kep nut 74-5467 "E* ring .035 thick 7/16" shaft 74-5466 inner ring bushing (case hardened steel) «50 iede x «75 x 1/2 L 72-3059 cherry microswitch E23-50H (steel! actuator) or 72-3060 cherry micro switch E33-50H (steel actuator) or 72-3063 Honeywel | microswitch V31-3005-D8 or 72-3064 “Qmron* microswitch V15FL-1C2-K
VENTURE (TM) SPEAKER ASSEMBLY
Part Number Description Reference
62-7061 6" X 9" Oval speaker cab. interior 61-8056 conn. 2 pin male molex 03-09-2002 P4 61-8054 pins, male molex 02-09-2118
“Warning: This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions manual, may cause interference to radio communications. As temporarily permitted by regulation it has not been tested for compliance with the limits for Class A computing devices pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures may be required to correct the interference.”