CATHODE RAY TOMES

Helifire

HeliFire (set 1) (Nintendo, 1980) · Manual · 24 pages · 10 sections · original scan

Page 1

Ula

OPERATION MANUAL

Nintendo

Page 2

Nn TUB-UP MK2

CONTENTS

SPECIFICATIONS ———aeeeesteetetstersstesseesesetensensetsenene2

INSTALLATION OF THE MACHINE

  • Cautions on installation (—— eeeatentetectateeestectscstseeseseseeetaeeeeeee 3
  • Earthing of machine 3

MAINTENANCE AND INSPECTION

  • Dismounting of front screen secseseesesetisneeseeeteesteeseeesesteeneee
(2) Dismounting of operation panelsecstieetieestesssstecssecssieessseesseeeneesG

POINTS AND METHODS OF ADJUSTMENT

(1) VO P.C. Boardseseseecasaceescaeesscaeaeacseaeenesenevenenees5
(2) ESS P.C. Boardseeetesittetiesnisisssssiecniecneeens6
  • Video Monitor seecsesteseeatestesesstesesatestcstesessteseess 7

NAME OF EACH PARTS

CW Body 4 se vasasteatevncesseneniisrumiieensnentssuaceny 9

  • PC. Board se tetatetteteeteeseseseseseetecereneeeneeeneee 11

(3). Operation Panel Assembly captaeaaiayestysrsasigeacictsaaiseoeseereseeee YD:

PARTS LIST 13

CAUTIONS

P.C, Board should not be exposed direct to the sun. Direct sunshine is very harmful to LSI (memory element).

P.C. Board to be stored or transported should be wrapped by a conductive pouch or aluminum foil, because LSI and IC used in the machine are semiconductor integrated circuits of which basic element is MOS-FET.

When images on the Video Monitor Screen are disturbed by powerful noise or other electrical causes, turn the main power off once and then on again.

Page 3

SPECIFICATIONS

a)

(2)

GB)

(4)

(5)

(6)

NOTE: Power Consumption

Size

Weight

-Number of Player

Number of Submarine

Accessories 103 W

: 600(W) X 880(D) X 1700(H)mm.

108 Kgs.

1 or 2 person(s)

: 3 — 6 (Adjustable)

: Operation Manual : 1 copy

Key for Back Door : 2 pes.

Key for Coin Box Door : 2 pes.

Fuse: 3 pes.

T20V oo vvesreseeree 4AX 2, 0.3AX1

220V—240V -.---- 4A, 2A, 0.3A

Specifications are subject to change for improvement without notice.

Page 4
  • INSTALLATION OF THE MACHINE

a

(2)

(3)

(4)

(5)

(6)

q)

2-2

a)

(2) Cautions on installation

The power cord of the machine should not be connected to a wall outlet together with large load unit(s) such as motor, cooler, etc.

Turn the power off before setting and removing the P.C. Board and connectors. Carefully handle them.

Do not touch IC, LSI and other electronic parts on P.C. Board. Do ‘not use a tester or the like on them. (They may be damaged by the inner voltage of the instruments.)

When exchanging a fuse, use a new one of the prescribed capacity.

The machine should be installed where it is not hot, keeping away from a heating appliance and direct sunshine.

The machine should be installed where it is not wet and dusty.

Do not touch the inside of the video monitor which has high tension units. Inform service station, if necessary.

Earthing of machine

When the machine is installed in a wet place, it should be grounded to avoid accident by an electric shock.

  • Connect an earthing wire to the earthing terminal of the machine.
  • The opposite end of the earthing wire should be connected to an earthing bar which is firmly inserted into the ground. a a

Cautions

  • Do not connect the earthing — wire to a water-pipe, because polyvinyl-chloride pipes are sometimes used in the water lines and, if so, the electronic continuity is cut at the points.
  • Do not connect the earthing wire to the gas pipe absolutely. That is very dangerous.
Page 5
  • MAINTENANCE AND INSPECTION

3-1

3-2

Operation Panel

Fastener

Front Door Dismounting of front screen

Opening the back door, pull the front screen clamp which is mounted under the top plate. Pull the front screen upward while pushing and then pull toward you.

Front Screen Clamp

Dismounting of operation panel

To dismount the operation panel for maintenance or inspection of the Control Lever Ass’y or Micro Switch, open the front door and unfasten the fastener.

Page 6
  • POINTS AND METHODS OF ADJUSTMENT

41 VO P.C. Board

The number of submarine, score level and the number of coin can be set with the switches on I/O P.C.Board according to the diagram below.

IOmrmMoOOD>D

TUB I/O

The switch is OFF (Bottom view)

Number of submarine

ON

ON

Score level for extra submarine

. 5,000 points 6,000 points 8,000 points 10,000 points

Coinage

1 coin / 1 play 2 coins/ 1 play

Table / Up-Right

Table Up-Right

  • Switch F and G have no function.
Page 7

ESS P.C. Board

Semi-fixed resistors, VR1 to VR6 on ESS P.C.Board are used to adjust video monitor screen and sound balance.

300KQ: 1/5w To adjust brightness Turn left VRI | vertical type | of sun glow in back- () to increase red knob ground brightness. [ 300KQ =«1/sw To adjust brightness vr2 | vertical type |of sea in background { ) blue knob

[vee plain type VR3 2Ka 1/5W To adjust height of | plain type _[ the sea in background 30KQ° 1 /sw To adjust height of vrg | plain type the waves in back- Omen blue knob ground

40KQ_ 1 /sw To adjust sound volume balance between VR5 | plain type sound(firing, explosion, etc.) and melodies

41KQl/sw To adjust tone of firing sound

Page 8

4-3 VIDEO MONITOR

V-SIZE

V-HOLD

H-CENT

BRIGHT

SOUND VOLUME

—— H-HOLD

Fuse 4A

Video Monitor Main P.C.Board

Fuse 0.3A

Do not touch the inside of the Video Monitor in which many

NOTE parts are supplied with high tension.
Page 9

5, WIRING and CONNECTION

gray Insulation Transformer Exclusive Use iG:

°°

SPEAKER,

o| [2,8

Ars O—-O o-0

O-O ° — = 5 z Video Monitor = Main P.C. Board ——————

; 40P Flat Cable Video Monitor Sound P.C. Board

«

2 ? :

2 ont o8 82

<0 ro gs] Sle 3 an in 7 § = 7 ©

Dee — _f ) ON? a Sa O-wlow A 4 +12V Loe 2° ESS P.C. Board L 4 6 -5v

P Sound HarnessSERVICE4
Connectorre |r
Peeaes. 5ae
O2VvBO-90-0-0-00
orange 95P
P ywiow 22S|al:
o—WtowO 4 S45] BEa

os E Toe a ° LUMA 3

ounO 6 S6O |eY

pa} 787 °? : Tone 2S 5

white d 959 Fa

ps —Brosio |e yellow green =

}O12 $12xz'

Towed Fs 13 CK a Ges O15 GND

Connector

Page 10

COIN

SWITCH orange

O

3P Coin Harness Connector 3

+24V brown - O1

2P Counter Harness Connector P

O2 O3 O04 O5 O6 O7 O8 O9 O10 O11 O12

brown brown,

EJOY O—0 1110 O1 wsoY ot od 8 9 NJOY 63/3 3 SJOY OO 4} 4 Tyetiong, 4 GND $0005 515 OED 5 FIRE o Ne Seledmeds Os O9 O10 O11 yellow vyettowso12 IPLAYER oO SO2 7} 7 d3eto13 2PLAYER oO ~O Lala dewe, GND black 9/9

11PMain Switch

Harness Connector OlO}I0O O16

on) ) “a O-O

O

fe) COUNTER SUB a | a MAIN O17 4

17P Junction Harness Connector 1/0 P.C. Board POWER He NOMS DOR ~ "3 ae CPU P.C.Board

P2

5OP Flat Cable OP CPU Harness Connector GND GND GND +12V NOISE FILTER

orange POWER SWITCH

yellow POWER P.C. Board

een As! FUSE

blue gray

  • NM TH OR DOD

white 9P 1/0 Harness Connector 200~240V 2A 100~120V 4a

AC IN Power Transformer

Page 11
  • NAME OF EACH PARTS 6-1 Body
Page 12

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 13
  • P.C. Board 01-68 PC. Board 06-00 I/O P.C. Board Mounting Bracket

05-00 CPU P.C. Board

07-00 ESS P.C. Board

01-25 P.C. Board Support

01-28 P.C. Board Spacer. Top

=| 01-26 P.C. Board Spacer (Small)

01-27 P.C. Board Spacer (Large)

o Removing P.C. Board Spacer

Press the claw with a pincette, as illustrated, and pull out the P.C. Board.

Page 14

01-52 Control Lever Ass’y

  • Operation Panel Assembly

Following lubricating oil is used.

Shin-etsu Silicon Grease “SILICOLUBE G31L”

01-5207

_ 01-S211 om ZS 01-52-12 Yh) am 01-52-09 @- 52. 05 Ryo ><"o 01-32-01

01-52-08

01-01-04

Page 15

7, PARTS LIST

  • Body FOB Japan
No.Name of PartsQ’ty | Remarksper pc.
TUBU-01-01Body1

TUBU-01-01-02 | Transformer Base 1

TUBU-01-01-03Cash Box1
TUBU-01-01-04Operation Panel Ass’y Base1
TUBU-01-01-05Back Door1
TUBU-01-02Coin Selector1
TUBU-01-02-01Coin Switch1
TUBU-01-03Back Door Lock1
TUBU-01-04Front Door Lock1_ |
TUBU-01-08Power Cord1
TUBU-01-10Strain Relief Bushing1
TUBU-O1-11Game Counter1
TUBU-01-21Speaker1
TUBU-01-22Operation Panel1
TUBU-01-23Front Screen1
TUBU-01-24Name Plate1
| TuBu-o1-25P.C. Board Support5
TUBU-01-26P.C. Board Spacer (Small)5
TUBU-01-27P.C. Board Spacer (Large)5
TUBU-01-28P.C. Board Spacer Top5

TUBU-01-29 | Front Door Ass’y 1

TUBU-01-30Fluorescent Lamp Ass’y1
TUBU-01-31Caster2

TUBU-01-32 Operation Panel Ass’y Fastener (A) 2

TUBU-01-33Double Backed Tape4
TUBU-01-34Service Switch1
TUBU-01-35Screen Filter1
TUBU-01-41Switch Bracket3
TUBU-01-42Fire Switch (red)1
TUBU-01-43Player Switch (1—Player, Blue)1
TUBU-01-44Player Switch (2—Player, Green)|1

TUBU-01-45 Control Lever Ass'y Mounting Plate 1

TUBU-01-46Control Knob1
TUBU-01-47Blind Plate1
TUBU-01-48Vibration Proof Rubber1|
Page 16

TUBU-01-49 Control Switch TUBU-01-50 Control Lever Plate TUBU-O01-51 Control Lever Collar TUBU-01-52 Control Lever Ass'y TUBU-01-52-01 Control Lever Ass'y Base TUBU-O1-52-02 Control Lever TUBU-01-52-03 Control Lever Pin(Large) TUBU-O1-52-04 Control Lever Pin(Smal1)

TUBU-01-52-05 E Ring 8 TUBU-01-52-06 E Ring 4 TUBU-O1-52-07 Slide Pin Bracket(Large) TUBU-01- 52-08 Slide Pin Bracket (Small) TUBU-01-52-09 Compression Spring

TUBU-01-52-10 Slide Pin TUBU-01-52-11 Nylon Washer TUBU-O1-52-12 Nut Plate TUBU-O1-52-13 | Stay TUBU-01-61 Front Screen Frame(Lower) TUBU-01-62 Micro Switch Blind Plate TUBU-01-64 Operation Panel Ass'y Fastener(B) TUBU-01-68 P.C.Board Mounting Bracket TUBU-O1-73 Service Switch Bracket TUBU-01-74 Strain Relief Bushing Plate TUBU-01-80 Blind Cardboard(Large) TUBU-01-81 Blind Cardboard(Smal1) TUBU-17-01 Video Monitor(20-5F)

TUB -05-00 CPU P.C.Board TUB -06-00 1/0 P.C.Board

TUB -07-00 ESS P.C.Board

TUB -08-00 Power P.C.Board TUBU-09-01-01 Power Trasformer Unit

TUBU-09-01-02 2P Table Tap

TUBU-10-01 Power Switch Ass'y

TUBU-10-01-01 Power Switch

TUBU-10-01-02 Fuse Holder

TUBU-10-01-03 Power Switch Plate TUBU-11-01 10P CPU Harness Connector

TUBU-11-02 9P I/O Harness Connector

Page 17

TUBU-11-03

TUBU-11-04

TUBU-11-05 TUBU-11-06

TUBU-11-07

TUBU-11-08

TUBU-11-09

TUBU-11-10

TUBU-11-17 TUBL-11-18

TUBU-11=19 TUBU-11-20

TUBU-11-21 Name of Parts

6P Sound Harness Connector

15P Sound Harness Connector _5P Service Harness Connector 3P Coin Harness Connector

11P Main Switch Harness Connector 17P Junction Harness Connector

2P Counter Harness Connector 2P Speaker Harness Connector 5OP Flat Cable

40P Flat Cable

5OP 3 Sockets Flat Cable

4P-750 Audio Harness Connector 6P-1000 Video Harness Connector Remarks

Page 18
  • CPU P.C. Board

FOB Japan Remarks

74LS153

8216

74LS08 Complete Set Dual 4-Line to 1l-Line Data Selector/Multiplexer Buffer and Line Driver

Quadruple 2-Input Positive AND Gate

74LS32

74LS174 MK4116 74LS74 Quadruple 2-Input Positive OR Gate Hex D-Type Flip Flop W/Reset RAM

Dual D-Type Edge-Triggered Flip Flop W/Set and Reset

74LS04 74LS02

74LS00

74LS138 Hex Inverter

Quadruple 2-Input Positive NOR Gate

Quadruple 2-Input Positive NAND Gate 3-to 8-Line Decoder/Demultiplexer 74LS139

C2708 74LS241 (8216) Dual 2-to 4-Line Decoder/ Demultiplexer EP-ROM Octal Buffer/Line Driver/ Line Receiver W/3-State Output Resistor

wt

Ceramic Capacitor 33 a Awe 5%

iKQ n "

Electrolytic Capacitor Nie © © wWloO NN

Page 19
  • 1/0 P.C. Board

Remarks

TUB-06-02 TUB-06-03 753614 7416 74109 Complete Set Dual NAND TTL to Mos Driver

Hex Inverter Buffer Driver

Dual J-K Positive Edge Triggered Flip-Flop W/Set and Reset TUB-06-04

TUB-06-05

TUB-06-06

TUB-06-07 TUB-06-08 74123

74161

74198

74804 74LS0O Dual Retriggerable Monostable Multivibrator

Synchronous Presettable 4-Bit Binary Counter W/Direct Reset 8 Bit Shift Register

S Hex Inverter

Quadruple 2-Input Positive NAND Gate

TUB-06-09 TUB-06-10 TUB-06-11

TUB-06-12

TUB-06-13 74LS04 74LS14 74LS20

74LS26

74LS32 Hex Inverter

Hex Schmitt Trigger Inverter Dual 4-Input Positive NAND Gate

Buffer and Interface Gates Open Collector Output Quadruple 2-Input Positive OR Gate FOB Japan per pc.

TUB-06-14 TUB-06-15

TUB-06-16

TUB-06-17

TUB-06-18

TUB-06~-19 TUB-06-20

TUB-06-21

TUB-06-22

TUB-06-23 TUB-06-24

TUB-06-25 74LS42 74LS55

74LS74

74LS86 BCD-to-Decimal Decoder

2-Wide 4-Input AND-OR- INVERTER Gate

Dual D-Type Edge-Triggered Flip-Flop W/Set and Reset Quadruple 2-Input Exclusive OR Gate

74LS151

74LS156 74LS158

74LS160

74LS164

74LS174 74LS175

74LS240 8-Line to 1+Line Data Selector/Multiplexer 2-Line to 4-Line Decoder

Quadruple 2-Line to 1-Line Data Selectors/Multiplexers Synchronous Presettable Decade Counter W/Direct Reset

8-Bit Serial-In Parallel- Out Shift Register Hex D-Type Flip-Flop W/Reset Quadruple D-Type Flip-Flop W/Reset Octal Buffer/Line Driver/ Line Receiver W/3-State Output

Page 20

FOB Japan Q'ty | Remarks

Hex Bus Driver W/3-State Output (Inverted) 76SBO8 8P 2SC828 28C1384 IS1885 IS1595 182075 Name of Parts

Ic 74LS368 TUB-06-26

BUB-06-27|Dip Switch TUB-O 8| Transistor

TUB-06-29 " /TUB-06-30| Diode TUB-06-31 TUB-06-32 TUB-06-33 TUB-06-34 TUB-06-35 TUB-06-36 TUB-06-37 TUB-06-38 TUB-06-39 TUB-06-40 TUB-06-41 TUB~06-42 TUB-06-43 TUB-06-44

TUB-06-46 TUB-06-47 TUB-06-48 TUB-06-49 TUB-06-50 TUB-06-51 TUB-06~52 TUB-06-53 TUB-06-54 TUB-06-55 TUB-06-56 TUB-06-57 TUB-06-58] Non-Polarized Electrolytic Capacitor TUB-06-59| Monolithic Ceramic

  • Capacitor TUB-06-60) Crystal Oscillator jewels we sem oee

Dipped-Mica Capacitor Ceramic Capacitor

1000pF " 0.01 uF ale arlp BP RF e[yp PN PP

0.1 uF 50V

ST-5D 1225 20.160MHz.

Page 21
  • ESS P.C. Board
  • : FOB Japan
Name of PartsQ'ty Remarksper pe.
TUB-07-O0|ESS P.C.BoardComplete Set;

TUB-07-01|IC 74LS74 Hex Inverter TUB-07-02] " 8080A TUB-07~-03 74LS367 8 Bit Microprocesser Hex Bus Driver W/3 State Output 8 Bit Microprocesser 1K Byte EP-ROM Precision Timers

Hex Inverter with Open Collector

2 Operational Amplifiers 1 Quadruple 2-Input Positive OR Gate TUB-07-04 TUB-07-05 TUB-07-06 TUB-07-07 " 8035 2708 NE555 74LS05

TUB-07-08 TUB-07-09 LM324 74LS32

TUB-07-10 74LS157 Data Selector/Multiplexer TUB-07-11 4096 Bit Static RAM TUB-07-12 "2114 " 74LS74 Quadruple 2-Line to 1-Line

Dual D-Type Edge Triggered Flip Flop W/Set and Reset

TUB-07-1374LS175Quadruple D-Type Flip Flop

W/Reset 8 Bit Serial-In Parralel- Out Shift Register Quadruple 2-Input Positive NAND Gate

Quadruple Bistable Latch 8 Bit Digital-to-Analog Converter (CQ Rank) TUB-07-14 74LS164

TUB-07-15 74LS00

TUB-07-16 TUB-07-17

TUB-07-18 74LS75 DAC-08

Operational Transconductance Amplifiers " CA3080

TUB-07-1974LS1617Synchronous Presettable 4

Bit Binary Counter W/Direct Reset

TUB-07-2074LS8514 Bit Magnitude W/Exp

Dual 4-Input Positive NAND Gate

Triple 3-Input Positive NAND Gate 74LS20

74LS10 TUB-07-22

C Mos Hex Inverter

13 NAND Gate TUB-07-23 4049UB " 74LS133 (748133) " 74LS86 Quadruple 2~Input Exclusive OR Gate

Hex Buffer Gates and Drivers

C Mos Quad Bilateral Switch of Analog or Digital Signals TUB-07-25

TUB-07-26 TUB-07-27 " 74367 " 4066

Page 22

TUB-07-29

TUB-07~30 TUB-07-31 TUB-07-32 TUB-07-33 TUB-07-34 TUB-07-35 TUB-07-36

TUB-07-38 TUB-07-39

TUB-07-40 TUB-07-41

| TUB-07-42 TUB-07-43 TUB-07-44 TUB-07-45 TUB-07-46

TUB-07-47 TUB-07~48 TUB-07-49 TUB-07~50 TUB-07-51 TUB-07-52 TUB-07-53 TUB-07-54 TUB-07-55 TUB-07-56 TUB-07-57

TUB-07-58 TUB-07-59 TUB-07-60 TUB-07-61 TUB-07-62 74121

7404 7400 75461(75471) Remarks

Triple 3-Input NOR Gate Mono Stable One Shot Multi Vibrator

Hex Inverter Gates

Quad 2-Input NAND Gates 2-Input AND Drivers FOB Japan per pc.

2SC1740

2SA7 33 2SC711 (E or F type) 2SC 2320 (F type)

Tantalum Capacitor IS1595 1ss 53

Electrolytic Capacitor

Semi-Fixed Resistor Pile ye RP by IR wD eB

BPR RP RB O01 uF 0.033 uF 0.01 uF 0.068 nF 0.00474 F 1/5W Blue Knob

Red Knob

Blue Knob

Page 23

FOB Japan per pc. Name of Parts

TUB-07-63 |Resistor(Carbon) TUB-07-64 TUB-07-65 TUB-07-66 TUB-07-67 TUB-07-68 TUB-07-69 TUB-07-70 TUB-07-71

TUB-07~72 TUB-07-73 TUB-07-74

TUB-07-75 TUB-07-76 TUB-07-77 TUB-07=78 TUB-07-79 TUB-07-80 TUB-07-81 TUB-07~82 TUB-07-83 TUB-07-84 TUB-07-85 TUB-07-86 TUB-07-87 TUB-07-88 TUB-07-89 TUB-07-90 TUB-07-91 TUB-07-92|Resistor Array Blue kr EP Ble BP eR BIR OB

10 elements

Page 24
  • Power P.C. Board

lwo. | Name of Parts Remarks per pce [tus 08-00| Power P.C.Board = |_—2 =| Complete Set | TUB 08-01 | Silicon Rectifier Diode 4B4B41 4A Bridge a 1B4B41_1A Bridge

TUB_08~02"al.P|

pt Switching Regulator IC TUB 08-03 | IC 3-D-0050

TUB 08-04]" TA7089Regulator IC

TUB 08-05 " 78M24 TUB 08-06 | Transistor TUB 08-07 TUB 08-08 24V_ Regulator IC 2SA1012 2SA817 2SC2562

‘TUB 08-10

TUB 08-11""
TUB 08-12""
TUB 08-13""

TUB. 08-14: " (Cement ) TUB 08-15 " Ll (Coil Winding) " (Metal) TUB 08-18 a w Eee aera

TUB 08-20hid"

TUB 08-21 | Electrolytic Capacitor TUB 08-22 TUB 08-23. TUB 08-24 TUB 08-16 TUB 08-17

Nw

. tt

" "

TUB 08-25""1000uF
TUB 08-26"‘a47uF

TUB 08-28 | Diode CTB24 Shot Key Diode TUB 08-29 s

TUB 08-30 TUB 08-31 IS1834 Fast Recovery Diode Choke Coil 1 |3A = 200pH : " 1] 0.5 400pH