CATHODE RAY TOMES

Tekken 4 Kit

Tekken 4 (TEF3 Ver. C) (Namco, 2001) · Kit Manual · 28 pages · 8 sections · original scan

Page 1

Game PCE Kit

Connections

and

Adjustments

TEKKEN 4

Issue 2

Page 2

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 3

NOTICE

MaGicGAte is a term to describe a copyright protection technology created by Sony Group. This MAGICGATE mark does not necessarily guarantee compatibily with other products bearing the “MagicGate” trademark.

MaGiIcGArteE is a trademark of Sony Corporation.

MaAGIcGATE est une terme décrivant une technique de protection de copyright crééé par Sony Group. MAGICGATE ne garantit pas nécessairement de cpmpatabilté avec d’autres produits portant la marque de commerce “MagicGate”

MaAGICGATE est une marque de commerce de Sony Corporation.

The DVD-ROM DISC supplied with the product must not be copied, modified, distributed, or used for the purposes other than the operation of the product. Copyright laws protect the contents of the DVD-ROM DISC. Infringement of copyright laws may be subject to criminal penalties.

Do not use the supplied DVD-ROM DISC with other product models or other media formats. Doing so may result in equipment failure.

Page 4

Contents

KIT CONTENTS 1.00... cccccccc ce cccccecececececseseseeeceneessesseneeeesessesesesesacsssesssesenseeeesesscienseeeates 5 1.. SPECIFICATIONS .cvisccis csi. ccsanenesteasteacrsnsysteneaie cctacctactia cciaapis staaa¥sastenceratenacenentacctanatas 7

  • CABINET CONNECTIONS (Standard Jamma)..............0cccccccccsceseeeteeeeseeeeeeeneeeee 7
  • CABINET CONNECTIONS (JVS Standard) ...........0.cccceccc cc cece teneeeeeeeeeeenenees 11
  • FITTING THE DONGLE 000... ee cece ce cenenececeseseeseseenenesesesieneneeeeenieees 12
  • FITTING THE CD-ROM DISC wxscccicaiaicincsscnecenacnaiianian mem canaseaiitasits 13
  • ADJUSTMENTS AND SETTINGS o.oo. ccc cece eeeeeneceeeseseeseeneneseeeseenenenees 15

6-1 Option Switches

6-2 Test Mode ooo. ccc cece cece csceececececeeeeceesesieseeeseseesesessessenesesieaeees 16

6-2-1 Display TeSt ac s:..2...c:.ccc:cosecceestcectescnencussetoneda cada censcniacnecuneduenvtacodacedsenentinetn 16

6-2-2 Colour Edit oo... cece cceeccececeeceecsceecseeceecssseseesesseeesesseneeenenaes 18

6-2-3, CONVOMQONCE sees scciceccce ceceeceainetspesncs energie cscecate ranean cree seen seesoe stead eeanveieees 18

6-2-4 Interlace oon. cece cee ce eee ee cece ceeseceecesseceecesseeesecesneeseseseeeeeeeas 19

6-2-5 Input Test .

6-2-6 Game Options ...... eee ececeecceeececeeseeeeeeeeeseeseeeeeeeeseseeeeeeeeseetneeneeeeentens 21

6-2-7 COIN OPPO «sicsiasess rcs ceesceseesececazecn teen veas rues reese seaneeateemnaann at vse este eee rates 22

6-2-8 Sound Test oo... eee eee cece cece eeececeecsesscsecsssesseseseseeseseesesesssseenenenaes 23

B-2-9 INS SHALUS oinisiscccsssecessceneotosotecesasatsanseobincepaniaonssonssoniacatecousstiaateestseysestenes 23

6-2-10 A.D. S - (Book Keeping) «2.0... cececeeeesceeececeeeeseeeeeneeneeeeeneeeeeeaeeneeneeeeees 24

6-2-11 Data Cleat wi scs.ccccccneccscctcestascatesasssecssesiescesssteseatascanssantratvserieces astestuiascaees 25

Page 5

KIT CONTENTS

Description Part No Quantity

Tekken 4 PCB Rack AssyXTEK4-PCB1
DVD Rom CD DiscXTEK4-CDROM1
Jamma (B) PCBXTEK4-JAMMA1

Power Supply Loom 1

RGB Video Loom 1 Rack Assy to Jamma (B) PCB connecting cables RCA (Phono) Audio Loom 1

Data Loom 1

Amp El connectors to 48way Edge Adaptor Loom692000671
Amp El connectors with Flying Leads Loom692000661

Button Decals 1 set

Instruction Card 1

Move List Card 1

Title Board 1

Tekken 4 Promotional Poster 1

Top Flash400007031
Universal Cabinet Side Decal - LHS / RHS400007042
Header Decal400007051
Connection and Adjustment Manual905001331
Page 6

SPECIFICATIONS

COMPATIBILITY:

PCB INPUT POWER:

OPERATING

ENVIRONMENT:

MONITOR ORIENTATION

AND SIGNAL: JAMMA STANDARD (with JAMMA (B) PCB) JAMMA VIDEO STANDARD (JVS)

+5v (45%) @ 7A (Min), +12v (45%) @ 2A (Min)

Temperature +5°C to +45°C Humidity 10% to 85% (no condensation)

Horizontal Orientation

Horizontal Frequency 15kHz / 31kHz (selectable)

RGB output level 0.7V p-p / 3.0V p-p (selectable) when set to 15kHz

0.7V p-p when set to 31kHz

Composite Sync / Separate Sync (selectable)

Page 7
  • CABINET CONNECTIONS (Standard Jamma)

Option Switches

PCB Rack Assy v (om (on (mo (om

CD-ROM Drive

Audio Cable

Data Cable

Jamma (B) PCB

Volume Control

Page 8

The JAMMA (B) PCB is connected to the game cabinet with a 56way Edge Connector (standard JAMMA) and 4 and 10way AMP El Connectors.

JAMMA 56way Connector

10way AMP El Connector

AMP El Connector

Note: Supplied in the Kit is an Amp El connectors to 48way extender card adaptor loom, for cabinets with an existing 48way connector, and an AMP El connectors with flying leads loom for cabinets without a 48way connection.

4 and 10way AMP El Connector with 48way Extender Card Part No. 69200067

4 and 10way AMP El Connector with flying leads Part No.69200066

Page 9

Connections for Standard JAMMA Cabinet

TEKKEN 4 JAMMA 56way Edge Connector r

Solder SideTerminal NoComponent SideTEKKEN 4
GNDA1GND
no57Guo10way AMP El Connector
TovolscenitPin NoDescription
+5voltD4+5volt1SNE
E52
+12voltF6+12volt3_[P2 KICK (Right) SwS
Polarizing Keye | 7Polarizing Key4_[P2KICK (Left) Sw4
Coin Counter 2H | 8[Coin Counter 12
J96
L Speaker (-)K10 | L Speaker (+)7P1 KICK (Right) Sw5
Audio (-) (mono)L41. | Audio (+) (mono)8P1 KICK (Left) Sw4
Video GREENM12|Video RED9
Video SYNCN | 13|Video BLUE10|GND
SERVICEP|14|Video GND

R | 15 | TEST

Coin Switch 2s | 16 | Coin Switch 4TEKKEN 4
P2 STARTT | 47|P1 start4way AMP El Connector
P2 Lever UPu | 18|P1 Lever UPPin NoDescription
P2 Lever DOWNv | 19|P1 Lever DOWN1
P2 Lever LEFTw | 20|P1 Lever LEFT2
P2 Lever RIGHTY | 21|P1 Lever RIGHT3|R Speaker (+)
P2 PUNCH (Left) Sw1Z | 22|P1 PUNCH (Left) Swi4|R Speaker (-)
P2 PUNCH (Right) Sw2a | 23|P1 PUNCH (Right) Sw2
P2 Sw3 Not usedb | 24|P1Sw3 Not Used

c | 2s Connector Loom a | 2 (Part no 69200066)

GNDe | 27GNDL
GNDf | 28GND
Page 10

4w AMP El pin 4

10w AMP EI pin 4

10w AMP EI pin 8 Adaptor for Earlier Tekken Series Cabinets with 48way Edge Connector (Part No 69200067)

PREVIOUS TEKKEN GAMES

48way Extension Connector

Solder SideTerminal NoComponent Side
R Speaker (-)A24 | B24R Speaker (+)

A23 | B23 A22 | B22 A21 B21

Polarizing KeyA20 | B20Polarizing Key

A19 | B19 A18 | B18 P2 KICK (Left) Sw4 | A17 | B17 | P2 KICK (Right) Sw5 A16 | B16 A15 | B15 GND Al4 | B14 GND A13 | B13 A12 | B12 Atl B11

A10 | B10 AQ BO

AS B38 GND AT B7 GND A6 | B6 | P1 KICK (Right) Sw5 P1 KICK (Left) Sw4 | AS BS A4 | B4 A3 B3

A2 B2

Al B1 4w AMP El pin 3

10w AMP EI pin 3

10w AMP EI pin 10 10w AMP EI pin 10

10w AMP EI pin 1

10w AMP EI pin 1

10w AMP EI pin 7

Page 11
  • CABINET CONNECTIONS (JVS Standard)

Video Connector

Audio Connectors

Data 1/0 Connector

Page 12
  • FITTING THE DONGLE

The dongle included in this kit is limited to this game only. DO NOT insert this Dongle in other games. Inserting the Dongle in other games may cause damage.

Ensure that the power is switched OFF before inserting the Dongle.

  • Remove ‘off pozi head screw (M3x10) and remove the Dongle Cover.

Dongle cover

Pozi head screw (M3x10)

  • _ Fit the Dongle to the left hand connector.

Left connector

(cbaNoonon) |_-— (comoonoal

aL

Dongle

  • Refit the Dongle cover and pozi head screw (M3x10)
Page 13
  • FITTING THE CD-ROM DISC

™@ The CD-ROM Disc must be inserted with the power switched on. To prevent an electric shock, accident or injury, do not touch any parts other than those specified below.

™ ~=The supplied CD-ROM Disc is designed exclusively for this product. Never use the CD-ROM Disc in any other product. Do not insert other CD-ROM Discs in the CD-ROM drive of this game. m@ The CD-ROM tray retracts automatically after 10 seconds.

  • Press the eject button of the CD-ROM drive to open the tray.

tH

  • HE

Access Lamp E

Eject Button

Page 14
  • Place the CD-ROM Disc on to the tray, ensuring that the label side (printed surface) is facing away from the Tray.

(x CD-ROM DISC (© Ensure that the CD-ROM Disc is securely placed on the tray, with the label side

() facing away from the tray

SY

Tray

  • Press the Eject button to retract the Tray in to the unit.
  • Switch the power OFF, wait approx 10 seconds then switch the game back ON.
Page 15
  • ADJUSTMENTS AND SETTINGS

The Game PC Board Assy is fitted with 4 Option Switches.

Option Switches

Volume Control

6-1 Option Switches

Switch 1 is used to change between Test Mode and Game Mode.

ON:Test ModeOFF:Game Mode

Switch 2 is used to set the output level of the video signal.

31kHzON:0.7V p-pOFF:0.7V p-p
15kHzON:3.0V p-pOFF:0.7v P-P

Switch 3 is used to change the monitor Sync Frequency

ON:31kHzOFF:15kHz
Note: When using a 31kHz monitor, set the RGB input of the monitor to 0.7v. If the monitor does not have a setting adjustment, refer to page 17 section 6-2-1 “Display Test’, and change the Contrast and RGB Brightness levels to adjust the brightness.

Switch 4 is used to set the Video Sync Signal

ON:Composite SyncOFF:Seperate Sync
Page 16

6-2 Test Mode

To enter Test Mode set the Test switch in the cabinet (if fitted) to ON, or if no Test switch is fitted to the cabinet, set Option switch 1 ON

4 NO pe Zt ddd"

Note: The test mode is activated only when the cabinet Test switch or Option switch 1 is moved from OFF to ON. If the game is switched on with either switch in the ON position the Test Mode will not be activated. The switch must be switched OFF and then ON to enter the test mode.

When the Test Mode is entered, the following screen is displayed.

Va

DISPLAY TEST Monitor Adjustments INPUT TEST Tests all switches

GAME OPTIONS Set Game options COIN OPTIONS Set Price of Play SOUND TEST Sound test

JVS STATUS Not used

A.D.S. Bookkeeping DATA CLEAR Data clear

EXIT & SAVE Exit from test mode

XN

Use the Joystick Up or Down to step through the tests. (The selected test will be displayed in red)

Press the 1 Player Button 1 to enter the selected test.

After making adjustments select EXIT and press the 1 Player Button 1 to return to the above screen. Select another test or select ‘EXIT & SAVE’ and press the 1 Player Button 1 to save the changes and return to the Game Mode.

Note: If ‘EXIT &SAVE’ is not selected and activated, any changes made may not be stored properly. Switching the cabinet Test switch or Option 1 switch OFF does not exit the Test Mode.

Switch the cabinet Test switch or Option 1 switch OFF.

Page 17

6-2-1. Display Test

This test allows the following checks and adjustments to be made.

1. Colour Edit Adjust contrast and brightness of each colour to match video output from the PCB to the Monitor.

Note: This adjustment should only be made if the correct picture quality cannot be achieved by using the normal monitor adjustments. Convergence Check and adjust the size, position and distortion of the screen image. Interlace Check Switches between interlaced and non-interlaced display. (Only with 15kHz video signal).

(OO) Contrast. OO Overall contrast

Bright RR: OO Brightness (red)

DISPLAY TESTBright : OOBrightness (green)
Color barBrightB : OOBrightness (blue)

Color bar (white)

Color bar (red)

LLL El Color bar (green)

Color bar (blue)

Reset Colour Edit values to factory defaults

Previous Color:P1-Button4
EXIT color edit:P4-Button3Colour Edit ON /OFF
NEXT:P1-Button1Select next test pattern

\__EXIT :_P1-Start _/ Return to test menu screen

Select display Test from the Test Menu Screen, the following screen is displayed.

DISPLAY TEST Color bar LL | DEE Color bar (white)

Ll TT EE Color bar (biue)

ENTER color edit:P1-Button3Colour Edit ON /OFF

NEXT P1-Button1 Select te-next test pattern

EXIT2Pt-StartReturn test menu screen

Each time the 1P Button 3 is pressed the Colour Edit adjustment box is turned ON or OFF. Press the 1P Button 1 to step to the next test function COLOUR BAR —> CONVERGENCE —>INTERLACE — ee

Page 18

6-2-2. Colour Edit

1 Ensure that the Colour Edit Adjustment Box is showing. (Press P1 Button 3 if the Adjustment box is not displayed.

  • Use the Joystick UP/DOWN to step to the required adjustment. (Contrast, Brightness (red), Brightness (green), Brightness (blue)).
  • Use the Joystick LEFT/RIGHT to adjust the value.
  • When all adjustments have been made, press P1 Button 1 to step to the Convergence Test or P1 Start Button to return to the Main Test Menu screen

6-2-3 Convergence

Use this screen to adjust the geometry (height, width , etc.) of the Monitor.

DISPLAY TEST. ) Convergence | | Interlace Contrast : 150 BrightR : 100 | IT |} erignte : 100 Bright B_: 100

Sees

Previous Color:P1-Button4
EXIT color edit:P1-Button3
NEXT:P1-Button1
EXIT:P1-Start)

When all adjustments have been made, press P1 Button 1 to step to the Interlace Test or P1 Start Button to return to the Main Test Menu screen.

Page 19

6-2-4 Interlace

Interlace Mode: This mode provides a more detailed and smoother graphics than the non-interlaced mode. This is achieved by shifting the picture display a half line in the vertical direction every other frame scan, so doubling the vertical resolution without changing the horizontal/vertical frequency.

Non-Interlaced Mode: __ Use this display if the interlace mode results in flicker over the entire screen display. In the non-interlaced mode, there is no shift of the display position, and the display remains constant every time.

1 Ensure that the Colour Edit Adjustment Box is showing. (Press P1 Button 3 if the Adjustment box is not displayed.)

  • Use the Joystick LEFT/RIGHT to change Interlace/Non Interlace.

( -\ > Interlace Interlace mode Contrast: 150 Bright: 100 DISPLAY TEST BrightG : 100 Interlace check Bright B_: 100

Previous Color: P1-Button4Reset Colour Edit values to factory defaults
EXIT color edit: P1-Button3Colour Edit ON /OFF
NEXT: P1-Button1Select next test pattern

LL EXIT : P1-Start Return to test menu screen

  • When the adjustment has been made, press P1 Button 1 to step back to the Colour Edit Test or P1 Start Button to return to the Main Test Menu screen.
Page 20

6-2-5 Input Test

Select Input Test from the Main Test Menu. The following screen is displayed.

P1 Start switch

Service switch on + the cabinet

P1 8-direction lever

P1 Button switches

DIP switches P2 Start switch

( >) INPUT TEST Pe 1P 2P Start Start |e Service Service Up Up Down Down | —™ Left Left Right Right

Shot 1Shot 2Shot 1Shot 2
Shot 3Shot 4Shot 3Shot 4
| —* Shot5Shot 6Shot 5Shot 6

DIPsw 1:OFF 2:OFF 3:OFF 4:OFF 1—* coin1:000 COIN2:000 EXIT: Pr-Butonta2 ~~]

To return to test menu screen P2 8-direction lever

P2 Button switches

Coin signal count (Default: 0)

Each time a switch is operated, the corresponding item on the display will change colour to red.

Note: When player button 1 is pressed Shot 1 is indicated. When player button 2 is pressed Shot 2 is indicated When player button 3 is pressed Shot 4 is indicated When player button 4 is pressed Shot 5 is indicated

When testing is completed, press P1 Buttons 1 and 2 together to return to the Main Test Menu screen.

Page 21

6-2-6 G jame Options

Select Game Options from the Main Test Menu. The following screen is displayed.

< Defaults in Green >

  • | Subtitles language: ENGLISH
  • | Difficulty level: MEDIUM
  • | Fight count <1P game> : 2
  • | Fight count <VS game> : 2
  • | Life bar <1P game> : +1 () | Life bar <vS game> : +1
  • | Guard damage: OFF
  • | Neutral guard: ON
  • | Round time: 60 () | Character change at continue: YES
  • | Character change at VS game: YES () | Sound in attract mode: YES
  • | Event mode: 0 FF
  • Hit color: GREEN Modify : EXIT: P1-Left/Right P1-Start GAME OPTIONS

S

  • Use the Joystick UP/DOWN to step to the required adjustment.
  • Use the Joystick LEFT/RIGHT to adjust the value.
  • When all adjustments have been made, press P1 Start Button to return to the Main Test Men (@) Subtitles Language u screen

[ ENGLISH I FRENCH | SPANISH | GERMAN ITALIAN

  • Difficulty level (degree of game difficulty) EASY HARD | VERY HARD. ULTRA HARD | ULTRA HARD 1 ULTRA HARD 2 SUPER HARD EXTRA SUPER HARD
  • Fight Count <1P game > (number of rounds required to win the game in 1 player mode)
1|2I34

(@)) Fight Count <VS game > (number of rounds required to win the game in 2 player mode)

1234
  • Life bar <1P game > (energy guage in 1 player mode)
24NORMAL4

+2 ) Life bar < VZ game > (energy guage in 2 player mode) 2 F] | +2

  • Guard damage (damage received on guard) ON (slight damage) OFF (no damage)
  • Neutral guard ( guard activated with lever in neutral) [ ON I OFF
  • Round time (time [seconds] per round)
30406080

() Character change at continue (change of character for continued game) YES (possible) NO (not possible)

  • Character change at VS game (change of character YES (possible) NO (not possible) () Sound in attract mode YES (with sound) NO (without sound)
  • Event mode (action after 2 player game has finished) ON (game over for both players) | OFF (1P game play continues for winner)

RED GREEN

  • Hit colour (colour of graphic effects when attacks are successful
Page 22

6-2-7 Coin Options

  • Select Coin Options from the Main Test Menu. The following screen is displayed.
(COIN OPTIONS>)

Defaults in Green

  • | > Start Cost 1Credit to START
  • Continue Cost 1Credit to CONTINUE
  • Coin chute 1 mechanical value 1Coin count as 1coin
  • Coin chute 2 mechanical value 1Coin count as 1coin
  • Credit mode COMMON
  • Coin counter 1counter
  • Free play no

Modify : P1-Left/Right EXIT: P1-Start

  • Use the Joystick UP/DOWN to step to the required adjustment.
  • Use the Joystick LEFT/RIGHT to adjust the value.
  • When all adjustments have been made, press P1 Start Button to return to the Main Test Menu screen
Note: When using a CashFlow acceptor ensure that Cost and Coin Chute values are set to 1
  • Start cost (number of credits to start a game)
23456789

H

  • Continue cost (number of credits to continue a game - must be equal to or smaller than start cost)
23456789
  • Coin chute 1 mechanical value (number of credits for each coin)
23456789

) Coin chute 2 mechanical value (number of credits for each coin)

23456789

}

  • Credit Mode (credit storage and use)

COMMON . Different credit accounts are Credits are stored as a single established. account regardles of which coin switch or start switch is operated Credits from coin 1 are used by player 1 and credits from coin 2 are used by player 2

) Coin counter (assignment of coin meters)

1 COUNTER 2 COUNTERS Both coin switches share one | Each coin switch has its own coin counter coin counter

  • Free play

YES (no coins NO (coins required) required)

Page 23

6-2-8 Sound Test

  • Select Sound Test from the Main Test Menu. The following screen is displayed.

SOUND TEST

POSITION:off ~¢ Displays which speaker is playing

SPEAKER:stereo ~——___________________ Displays monaural/stereo setting

Check Sound P1-Button1 Change Speaker P1-Left/Right EXIT P1-Start

X /

  • Press 1P Button 1 to conduct a stereo check. Sound will be produced from the left speaker only, then the right speaker only, then both speakers together. The display will show which speaker is active.
  • Use the Joystick LEFT/RIGHT to change between STEREO/MONO sound.
  • When testing has been completed, press P1 Start Button to return to the Main Test Menu screen

6-2-9 JVS Status

This test is inactive and not used on JAMMA system cabinets, it is only operational on JVS system cabinets.

Page 24

6-2-10 A. D.S - (Book Keeping)

Al.

SES

> Select ADS from the Main Test Menu. The following screen is displayed.

( ADS ON TIME. x:xx:xx (e)

(a)Coin 1 TotalxxPlay Ratio100%a
(b)Coin 2 Totalxx1P Play Ratioxx.x%(a)
(c) | Service TotalxxVS Play Ratioxx.x%(h)
  • | Freeplay Total xx

Total Time Count Average

() | 1P Playx:xx:xxXXXXIXXIXX
@) | 1P Cont.x:xx:xxXXXXIXXIXX
(k) | VS Playx:xx:xxXXXXIXXXX
() | AN Playx:xx:xxXXXXIXXIXX

EXIT: P1-Start

Total games on 1 player side. Total games on 2 player side. Total number of games using the Service switch. Total number of games during Free Play. Total time game has been switched on. Total time the game has been played as a 1P game, Total number of 1P. games played and the Average time of a 1P game. Total time the game has been played as a 1P Continue game, Total number of 1P Continue games played and the Average time of a 1P Continue game. Total time the game has been played as a 2P game, Total number of 2P games played and the Average time of a 2P game Total time the game has been played, Total number of games played and the Average time of all games.

Page 25

6-2-11 Data Clear

1.

(a) (b) (c) (d) (e) Select Data Clear from the Main Test Menu. The following screen is displayed.

DATA CLEAR >)

  • | Cancel
  • | ADS. data clear
  • | Ranking data clear
  • | Set defaults all options
  • | Allclear

CLEAR: P1-Button1 EXIT: P1-Start )

Use the Joystick UP/DOWN to step to the required adjustment.

When all adjustments have been made, press P1 Start Button to return to the Main Test Menu screen

Returns to the Main Test Menu. Resets all Book Keeping data to zero Resets all ranking data such as record of consecutive wins to factory default Resets all Game and Coin Options to factory default. Executes (a), (b) and (c) all at once.

Page 26

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 27

This page carries no recoverable text. It is a drawing or a photograph. See the original scan.

Page 28

Copies of Namco Game Manuals can be downloaded from our website: www.namco.co.uk They are located under Components Distribution

For all Parts or Technical Support contact:

Brent Electronic, Namco House, Units 5-8, Acton Park Estate, The Vale, London. W3 7QE

www.namco.co.uk

For Technical Support, Warranty and

Advance Replacement Parts:- J +44 (0) 20 8324 6120

For Consumable Parts:- J +44 (0) 20 8324 6102

Fax for both:- fy +44 (0) 20 8324 6126