CATHODE RAY TOMES

Centipede Caberat DP-189-3rd-02B

Centipede (revision 4) (Atari, 1980) · Drawing Package · 1 pages · original scan

Page 1
Scan of page 1

Joystick Circuitry

Option Input Circuitry

wa TolFrom MPU Data Bus Sheet 1, Side B

bit

il Sheet 1, Si

Testing the Option Switches

Perform the CAT Box preliminary set-up.

2. Set the CAT Box switches as follows:

DBUS SOURCE to DATA BYTES 101 IW to READ. Key in address 0800 (N9) or 080 (NB) FIW MODE to STATIC

  • Activate the switch while monitoring the DATA DISPLAY. The DATA DISPLAY will change ifthe switch Is operating property From MPU Address Bus

——/ Coin Counter |

Testing the Player Inputs

1, Perform the CAT Box Preliminary Setup.

‘a. DBUS SOURCE to DATA

b. BYTES 101 ©. RUW to READ

  • Key in address 0600 (self-test switch ‘nly) or 0CO1 (all others), e. RW MODE to STATIC
  • Activate the following player input switch 6, one ata time, while monitoring the DATA DISPLAY: Coin Right ». Goin Lett ©. SLAM
  • FIRE fe. START 1 1 START 2
  • The DATA DISPLAY will change if the switches are operating property Testing the Audio Outputs
  • Perform the CAT Box preliminary set-up.

2, Set the CAT Box switches as follows: BUS SOURCE to DATA From MPU b BYTES tot Address Bus c. RIW to WRITE. Sheet 1, Side B &. Key nadaress or ress ADDRESS INCR ©: Press DATA SET t Key incata aa 6: Set UW MODE to PULSE, then to OFF = B. For each adoress, repeat sequence = Staring at Step d ADDRESS ATA eSULTs Soe ES 10oF Sad

100F03incall‘or

1085 a

om——-AF_—_-Putetoe is heard om channel 1 output=
oo!09—Channel 1 outputs wuned at=
ioe88=
283-AF_—_-Puretong is heard tom channel 2 output.

100200 Ghannel Boutput is ned ot S woo 88 1005 AF Pure tones nerd trom channel 3 output 105 0>.__Channe outputs tmned of jo

or——AF__Puretones nerd trom channel 4 output

or 00. Channel# outputs tuned oft

<2 Denotes a test point

Output Circuitry

we WE dae

Coin Counter Output Circuit This circuit consists of coin counter drivers Q6, Q7, and Q8 and data latch M10. The circuit is addressed by the MPU on ABO-AB2 and written by the MPU ‘on data line DB7. When the input to a driver is clocked high, its collector goes. Tow grounding the return of the coin counter in the coin door. ‘The video output circuit receives motion object, playtield, a dress and data inputs and produces a video output to be displayed on the game monitor. In order to read out of the color AM, GRYO and GRY1 Irom the motion object circultry are mul: tiplexed with AREAO and AREAT from the playfield circuit by EB. The output, selected by GRYO or GRY1, is RAMAO-RAMAS (RAM ADDRESS), RAMAO-RAMA3 are applied to color RAM C8. The colors red, ‘green, blue and an alternate color bit are outputs. The three co! (or bits are latched by AB as the game video in the three basic Colors (or shades of gray in a black and white moniton). When the alternate color bt (C8 pin 11) is active, an altemate shade of blue or green is availabe.

‘The following conditions, along with the various combina tions of COLOR 1 (red), COLOR 2 (green) and COLOR 3 (biue), provide 6 extra colors for a total of 14

  • IAB pin 11 is low, transistor Q5 conducts and draws cur: rent from COLOR 3, The results apale blue when COLOR and COLOR 2 ae off
  • If AB pin 10 is low, transistor Q4 conducts and draws cur ‘ent from COLOR 2. The result is a pale green when COL. (OR 1 and COLOR 3 are off

LL Video Output Circuitry ETE

Sheet 2, Side & ‘DP-189-02 Se printing tipede/Cabaret Centipede”

Mini-Trak Ball™ Circuitry Player Input Circuitry ideo Output Circuitry avany Audio Output Circuitry Coin Counter Output Circuitry

High Score Memory Circuitry

Section of 037241-01 H +--+ Mini-Trak Ball™ Circuitry

Does me Aeree 10 Testing the Mini-Trak Ball™ Inputs

  • Perform the CAT Box Preliminary Setup.

b. BYTES to1 ©. RIW to READ

  • Key in address 0600 (vertical) or 0002 (horizontal) fe, RUW MODE to PULSE
  • Spin the Mini:Trak Ball™ while monitoring the DATA DIS- PLAY. The DATA DISPLAY will change if the MiniTrak Ball input is operating propery. High Score Memory Circuitry

‘The High Score Memory circuit stores the three best scores and other pertinent informa: tion, These scores are saved even if power is removed from the game. The High Score Memory circuit consists of an erasable reprogram. mable ROM ES, latches E4, H4, J4, buffer H5 and timer Att

‘All produces a 0-1SV square wave at a 1V rate, This signal, when + 18V, forward biases diode CRS and allows capacitor C86 to charge to ~29V. When the signal is OV, CRS is cutoff ‘and ORG is forward-biased which causes C84 to develop a charge. C84 charges to approxi: mately ~ 28V. Ths is the potential required for EAROM C0 to operate,

The MPU addresses the EAROM (ABO-AB5) when alow EAADDR gates WRITE? at gate AS. The trailing edge of the gated pulse latches the address information to the EAROM ES via Ja Data is latched by H4 at the same time. The EAROM mode (read, write or erase) is deter ‘mined by DB0-DBS at latch E4. A iow EACON: TROL gates WRITE? at gate Aé. The trailing edge of this gated pulse latches the data into the EAROM E5 via latch Ha.

Data_is read from the EAROM when ‘on pin 1 of butler Hé goes low. From MPU Address Bus Sheet 1, Side B